f49e798ef9
Start DataUploader implementation, implement Add/FinishTrajectory ( #811 )
...
[RFC=0002](https://github.com/googlecartographer/rfcs/blob/master/text/0002-cloud-based-mapping-1.md )
2018-01-12 23:16:29 +01:00
6125766c81
Define default num_event_threads config. ( #785 )
...
(This was not covered by tests because they manually set it to 1.)
2018-01-04 13:51:30 +01:00
e596b75113
Add binary for cartographer_grpc_server. ( #747 )
...
[RFC=0002](https://github.com/googlecartographer/rfcs/blob/master/text/0002-cloud-based-mapping-1.md )
2017-12-11 19:09:52 +01:00
055728af93
Rename options for consistency. ( #686 )
...
"scan" is better named "node" if it refers to a node in global SLAM.
"penalty factor" is renamed "weight" for consistency with other similar options.
"scans_per_accumulation" is renamed "num_accumulated_range_data" to match the code and since the accumulated data is not called "scan".
2017-11-17 10:52:22 +01:00
16d62f45f0
Rename sparse_pose_graph options. ( #682 )
...
The default pose graph configuration is now included as "pose_graph.lua"
and available as POSE_GRAPH.
[RFC=0001](https://github.com/googlecartographer/rfcs/blob/master/text/0001-renaming-sparse-pose-graph.md )
2017-11-16 11:48:25 +01:00
5896ead32e
Introduce timeout for global constraints. ( #517 )
...
This PR introduces a new option that specifies the number of seconds
after which global matcher searches are performed if no recent global
constraints have been found between the submap's and the node's
trajectory.
2017-09-14 12:11:54 +02:00
22f41d8e37
Store rotational histogram as part of the node data. ( #503 )
...
The compressed point cloud is no longer stored as part of the
node data to reduce memory consumption.
2017-09-07 11:01:03 +02:00
a7fe8bd2ab
Add filtered point cloud to TrajectoryNode::Data for 2D. ( #483 )
2017-08-28 11:17:53 +02:00
42d8a8f005
Add filtered point clouds to TrajectoryNode::Data for 3D. ( #482 )
2017-08-25 16:56:50 +02:00
96b71e227f
Add histograms for pose residuals ( #478 )
...
* WIP Add histograms for pose residuals
* Address reviewers comments
* Address more comments.
2017-08-25 11:39:56 +02:00
2fd2e86351
Add fixed frame pose weight into optimization problem options. ( #477 )
2017-08-24 15:40:48 +02:00
4d11a226ff
Expose low resolution matching scores. ( #470 )
...
This is needed in preparation of adding a low resolution score histogram.
2017-08-23 17:48:49 +02:00
2e53586818
Also check low resolution match for 3D loop closure. ( #468 )
...
Related to #369 .
2017-08-22 17:29:20 +02:00
11dbdf91b9
Remove unused code and option for odometry states. ( #451 )
2017-08-11 17:38:48 +02:00
3859da7ea4
Better tuning for 2D. ( #428 )
2017-07-26 10:50:01 +02:00
1bce14b7b5
Adds accumulation of range data to 2D. ( #408 )
...
This mostly follows the implementation as done for 3D.
Towards googlecartographer/cartographer_ros#212 .
2017-07-18 12:10:40 +02:00
3f4d795c3e
Add pure localization parameter to trajectory builder options. ( #389 )
2017-07-05 16:55:06 +02:00
3346474963
Grow the ProbabilityGrid as needed instead of preconfiguring its size. ( #387 )
...
This removes the 'half_length' option.
PAIR=wohe
2017-07-05 14:17:04 +02:00
54bd81a78b
Remove UKF related code and configuration. ( #378 )
2017-06-30 13:19:13 +02:00
17a22edebc
Change local 3D SLAM to not use a UKF. ( #375 )
...
This follows the 2D local SLAM in implementing a simple
constant velocity model and allows integrating odometry and
rotation information from an IMU.
2017-06-30 11:49:22 +02:00
f765e55ea9
Use multi-res scan matching for loop closures too. ( #374 )
...
Improves loop closure scan matcher refinement.
2017-06-30 09:30:09 +02:00
19da0ab7c8
Gravity align in local 3D SLAM. ( #373 )
2017-06-28 16:17:18 +02:00
f88fcec851
Remove the unused OptimizingLocalTrajectoryBuilder. ( #368 )
...
It has not been used for a long time and has to be replaced by
a better implementation.
2017-06-27 15:44:46 +02:00
2df8bcde61
Remove unused 'imu_gravity_variance' option. ( #363 )
2017-06-26 13:23:58 +02:00
ff37b0bb7d
Remove output_debug_images. ( #358 )
...
This is now better done by RViz. This also gets rid of the dependency on webp.
2017-06-23 14:53:04 +02:00
92f154f561
Also use fixed covariances in 3D SLAM. ( #308 )
...
This follows #307 .
2017-06-01 15:04:07 +02:00
a2e52f81cf
Remove 2D scan matcher covariances. ( #307 )
...
This replaces the scaled covariances derived from the Ceres
scan matcher by directly configurable weights. Using covariances
did not provide the expected benefit, and replacing the scaling
matrix by two values will allow a faster evaluation of the cost
function in the future.
2017-05-31 11:56:32 +02:00
522b37979a
Enable multiple configuration for multi-trajectory ( #248 )
2017-05-08 11:58:53 +02:00
79dc1f848f
Remove 'laser' references from parameter names. ( #259 )
...
Related to #250 .
2017-05-04 15:38:41 +02:00
4fa190d316
Rename LaserFan to RangeData. ( #224 )
...
LaserFan is misleading since range data can come from
various sensor types.
2017-03-23 14:56:18 +01:00
b2175f0d93
Remove covariance from the 3D Ceres scan matcher. ( #200 )
...
Instead of passing around fake covariances generated by the scan matcher,
we introduce appropriate values where they are needed.
2017-02-08 15:22:28 +01:00
71c951b370
Remove the 'log_residual_histograms' option. ( #166 )
...
This option only existed in 2D. Also other refactoring to make the 2D
sparse pose graph optimization more similar to 3D.
2016-12-19 17:57:12 +01:00
5af133c0dd
Improve the sparse pose graph optimization. ( #165 )
...
Removes the loss function for intra-submap constraints in 3D SLAM,
as it is already done in 2D. Also removes a duplicate call to the
solver in 2D, and code cleanup.
2016-12-19 17:02:05 +01:00
574a56bbbc
Remove the UKF from local 2D SLAM. ( #140 )
...
Changes default configuration to log loop closure matches.
2016-11-23 12:37:55 +01:00
a39bbff70c
Removes odometer covariance from public API. ( #137 )
2016-11-21 12:34:52 +01:00
8cd3178c69
Moves 2D laser options into 2D trajectory builder. ( #114 )
2016-11-15 13:24:58 +01:00
3e64a803a4
Consistently name weight parameter. ( #116 )
...
All parameters scaling optimization residuals to determine relative
importance are now consistently named.
2016-10-28 16:39:45 +02:00
b94880c56e
Improves parameter names. ( #111 )
2016-10-28 13:26:13 +02:00
a5b81ff159
Allow continuing after running a "final" optimization. ( #109 )
...
And a tiny cleanup of the submap visualization query.
2016-10-27 15:25:57 +02:00
8238ad8bc3
Do not accumulate scans by default for 3D SLAM. ( #30 )
2016-10-04 14:59:09 +02:00
d2962c004f
Remove the 'also_match_to_new_submaps' option. ( #29 )
...
Instead, using a different constraint_builder.sampling_ratio is preferred.
2016-09-30 16:00:10 +02:00
e526a7022f
Remove covariance computation from branch-and-bound. ( #27 )
...
These covariances were only used in 2D and are only an estimate.
Following 3D, we change 2D to use the (local) covariance computed
using Ceres.
2016-09-23 14:27:19 +02:00
14355a91a1
Remove dead code. ( #26 )
2016-09-22 17:53:32 +02:00
0796d50b00
Removes max_covariance_trace option. ( #25 )
...
This option is no longer really useful to predict outliers.
It is removed and other parameters scaled to minimize the change
in behavior. And related cleanup.
2016-09-22 11:35:47 +02:00
83a29df102
Renames expect_imu to use_imu. ( #24 )
2016-09-08 16:36:05 +02:00
fc166fdefa
Adds MapBuilder and cleans up some configurations. ( #23 )
2016-09-08 16:21:25 +02:00
54a7faf294
Optimize only once per submap in 2D. ( #22 )
...
The setting was unintentionally set to optimize twice per submap which
harms parallelism.
2016-09-08 14:36:33 +02:00
269c28cb0c
Moves the contents of the cartographer subdirectory up one level.
2016-08-03 12:48:29 +02:00
Christoph Schütte
gaschler
Wolfgang Hess
jie
Holger Rapp
Moritz Münst
Damon Kohler
Yutaka Takaoka
Damon Kohler