12345qiupeng
/
Motion_EC_Stm32_archived
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Motion_EC_Stm32_archived/Core/Src/gpio.c

197 lines
7.6 KiB
C
Raw Normal View History

update
2020-02-20 12:38:58 +08:00
/**
******************************************************************************
* File Name : gpio.c
* Description : This file provides code for the configuration
* of all used GPIO pins.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "gpio.h"
/* USER CODE BEGIN 0 */
buzz run_led uart4
2020-04-17 15:55:14 +08:00
extern NaviKit_t NaviKit;
update
2020-02-20 12:38:58 +08:00
/* USER CODE END 0 */
/*----------------------------------------------------------------------------*/
/* Configure GPIO */
/*----------------------------------------------------------------------------*/
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/** Configure pins as
* Analog
* Input
* Output
* EVENT_OUT
* EXTI
*/
void MX_GPIO_Init(void)
{
update
2020-04-02 22:18:11 +08:00
GPIO_InitTypeDef GPIO_InitStruct = {0};
update
2020-02-20 12:38:58 +08:00
/* GPIO Ports Clock Enable */
update
2020-04-02 22:18:11 +08:00
__HAL_RCC_GPIOE_CLK_ENABLE();
update
2020-04-06 21:16:18 +08:00
__HAL_RCC_GPIOC_CLK_ENABLE();
update
2020-07-15 18:26:22 +08:00
__HAL_RCC_GPIOA_CLK_ENABLE();
update
2020-03-17 13:08:19 +08:00
__HAL_RCC_GPIOB_CLK_ENABLE();
update
2020-07-15 18:26:22 +08:00
__HAL_RCC_GPIOD_CLK_ENABLE();
update
2020-02-20 12:38:58 +08:00
update
2020-04-02 22:18:11 +08:00
/*Configure GPIO pin Output Level */
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_WritePin(SYS_POWER_LED_CTL_GPIO_Port, SYS_POWER_LED_CTL_Pin, GPIO_PIN_SET);
update
2020-04-02 22:18:11 +08:00
/*Configure GPIO pin Output Level */
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_WritePin(GPIOE, PMB_PS_ON_Pin|SYS_FAN_CTL_1_Pin|SYS_FAN_CTL_2_Pin|SYS_FAN_CTL_3_Pin, GPIO_PIN_RESET);
update
2020-04-02 22:18:11 +08:00
/*Configure GPIO pin Output Level */
backup
2020-07-23 17:43:36 +08:00
HAL_GPIO_WritePin(GPIOC, PMB_CHRG_SHDN_Pin|SYS_BUZZ_CTL_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, PMB_TEMP_SEN_EN_Pin|SYS_RUN_LED_CTL_Pin|SOC_U2_HUB_PWR_CTL_Pin, GPIO_PIN_RESET);
update
2020-04-02 22:18:11 +08:00
update
2020-04-06 21:16:18 +08:00
/*Configure GPIO pin Output Level */
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_WritePin(GPIOB, IIC2_SCL_Pin|IIC2_SDA_Pin|USB2_VBUS_CTL_1_Pin|USB2_VBUS_CTL_2_Pin
backup
2020-07-23 17:43:36 +08:00
|USB2_VBUS_CTL_3_Pin|USB2_VBUS_CTL_4_Pin, GPIO_PIN_RESET);
update
2020-07-15 18:26:22 +08:00
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOD, USB2_VBUS_CTL_5_Pin|USB2_VBUS_CTL_6_Pin|USB3_VBUS_CTL_5_Pin|USB3_VBUS_CTL_6_Pin
|USB3_VBUS_CTL_1_Pin|USB3_VBUS_CTL_2_Pin|USB3_VBUS_CTL_3_Pin|USB3_VBUS_CTL_4_Pin
|SOC_U3_HUB_PWR_CTL_Pin|SOC_U3_HOST_PWR_CTL_Pin|SOC_U3_GEC_PWR_CTL_Pin|SOC_GE_SW_PWR_CTL_Pin
backup
2020-07-23 17:43:36 +08:00
|SOM_POWER_EN_Pin, GPIO_PIN_RESET);
update
2020-07-15 18:26:22 +08:00
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(USB2_FS_ENUM_CTL_GPIO_Port, USB2_FS_ENUM_CTL_Pin, GPIO_PIN_RESET);
backup
2020-07-23 17:43:36 +08:00
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOD, SOM_SLEEP_WAKE_Pin|SOM_FORCE_RECOVERY_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(SOM_SYS_RESET_GPIO_Port, SOM_SYS_RESET_Pin, GPIO_PIN_SET);
update
2020-07-15 18:26:22 +08:00
/*Configure GPIO pins : PEPin PEPin PEPin PEPin
PEPin */
GPIO_InitStruct.Pin = SYS_POWER_LED_CTL_Pin|PMB_PS_ON_Pin|SYS_FAN_CTL_1_Pin|SYS_FAN_CTL_2_Pin
|SYS_FAN_CTL_3_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
update
2020-04-06 21:16:18 +08:00
buzz run_led uart4
2020-04-17 15:55:14 +08:00
/*Configure GPIO pin : PtPin */
update
2020-07-15 18:26:22 +08:00
GPIO_InitStruct.Pin = SYS_CUSTOM_BTN_Pin;
buzz run_led uart4
2020-04-17 15:55:14 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLUP;
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_Init(SYS_CUSTOM_BTN_GPIO_Port, &GPIO_InitStruct);
update
2020-04-02 22:18:11 +08:00
update
2020-07-15 18:26:22 +08:00
/*Configure GPIO pins : PEPin PEPin */
GPIO_InitStruct.Pin = PMB_CHRG_STAT2_Pin|PMG_CHRG_STAT1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/*Configure GPIO pins : PCPin PCPin PCPin PCPin
PCPin */
GPIO_InitStruct.Pin = PMB_CHRG_SHDN_Pin|PMB_TEMP_SEN_EN_Pin|SYS_RUN_LED_CTL_Pin|SYS_BUZZ_CTL_Pin
|SOC_U2_HUB_PWR_CTL_Pin;
update
2020-04-02 22:18:11 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/*Configure GPIO pins : PCPin PCPin */
GPIO_InitStruct.Pin = PMB_TEMP_SEN_ALT_Pin|PMB_CLOULOMB_ALCC_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
update
2020-04-02 22:18:11 +08:00
/*Configure GPIO pin : PtPin */
update
2020-07-15 18:26:22 +08:00
GPIO_InitStruct.Pin = SYS_POWER_BTN_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(SYS_POWER_BTN_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : PEPin PEPin PEPin */
GPIO_InitStruct.Pin = SYS_FAN_SNS_1_Pin|SYS_FAN_SNS_2_Pin|SYS_FAN_SNS_3_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin PBPin PBPin
PBPin PBPin PBPin */
GPIO_InitStruct.Pin = IIC2_SCL_Pin|IIC2_SDA_Pin|USB2_VBUS_CTL_1_Pin|USB2_VBUS_CTL_2_Pin
|USB2_VBUS_CTL_3_Pin|USB2_VBUS_CTL_4_Pin|SOM_SYS_RESET_Pin;
update enum control gpio
2020-04-17 18:25:14 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
update
2020-04-02 22:18:11 +08:00
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
update
2020-04-02 22:18:11 +08:00
/*Configure GPIO pins : PDPin PDPin PDPin PDPin
update
2020-07-15 18:26:22 +08:00
PDPin PDPin PDPin PDPin
PDPin PDPin PDPin PDPin
PDPin PDPin PDPin */
GPIO_InitStruct.Pin = USB2_VBUS_CTL_5_Pin|USB2_VBUS_CTL_6_Pin|USB3_VBUS_CTL_5_Pin|USB3_VBUS_CTL_6_Pin
|USB3_VBUS_CTL_1_Pin|USB3_VBUS_CTL_2_Pin|USB3_VBUS_CTL_3_Pin|USB3_VBUS_CTL_4_Pin
|SOC_U3_HUB_PWR_CTL_Pin|SOC_U3_HOST_PWR_CTL_Pin|SOC_U3_GEC_PWR_CTL_Pin|SOC_GE_SW_PWR_CTL_Pin
|SOM_POWER_EN_Pin|SOM_SLEEP_WAKE_Pin|SOM_FORCE_RECOVERY_Pin;
update
2020-04-02 22:18:11 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
add power status check config
2020-08-24 11:36:08 +08:00
/*Configure GPIO pins : PCPin PCPin PCPin */
GPIO_InitStruct.Pin = SOC_U3_HOST_PWR_STA_Pin|SOC_U3_HUB_PWR_STA_Pin|SOC_U2_HUB_PWR_STA_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
update
2020-04-06 21:16:18 +08:00
/*Configure GPIO pin : PtPin */
update
2020-07-15 18:26:22 +08:00
GPIO_InitStruct.Pin = USB2_FS_ENUM_CTL_Pin;
update
2020-04-06 21:16:18 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_Init(USB2_FS_ENUM_CTL_GPIO_Port, &GPIO_InitStruct);
update
2020-04-06 21:16:18 +08:00
update
2020-04-02 22:18:11 +08:00
/*Configure GPIO pin : PtPin */
update
2020-07-15 18:26:22 +08:00
GPIO_InitStruct.Pin = SOM_SHUTDOWN_REQ_Pin;
backup
2020-08-05 19:22:37 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
update
2020-04-02 22:18:11 +08:00
GPIO_InitStruct.Pull = GPIO_NOPULL;
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_Init(SOM_SHUTDOWN_REQ_GPIO_Port, &GPIO_InitStruct);
update
2020-04-02 22:18:11 +08:00
buzz run_led uart4
2020-04-17 15:55:14 +08:00
/*Configure GPIO pin : PtPin */
update
2020-07-15 18:26:22 +08:00
GPIO_InitStruct.Pin = SOM_MOD_SLEEP_Pin;
buzz run_led uart4
2020-04-17 15:55:14 +08:00
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
update
2020-07-15 18:26:22 +08:00
HAL_GPIO_Init(SOM_MOD_SLEEP_GPIO_Port, &GPIO_InitStruct);
buzz run_led uart4
2020-04-17 15:55:14 +08:00
/* EXTI interrupt init*/
update
2020-07-15 18:26:22 +08:00
HAL_NVIC_SetPriority(EXTI0_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
HAL_NVIC_SetPriority(EXTI3_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(EXTI3_IRQn);
buzz run_led uart4
2020-04-17 15:55:14 +08:00
backup
2020-08-05 19:22:37 +08:00
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
update
2020-02-20 12:38:58 +08:00
}
/* USER CODE BEGIN 2 */
buzz run_led uart4
2020-04-17 15:55:14 +08:00
update
2020-02-20 12:38:58 +08:00
/* USER CODE END 2 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/