scons build success
commit
47f414c189
|
@ -0,0 +1,241 @@
|
|||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# RT-Thread Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# RT-Thread Kernel
|
||||
#
|
||||
CONFIG_RT_NAME_MAX=8
|
||||
# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
|
||||
# CONFIG_RT_USING_SMART is not set
|
||||
# CONFIG_RT_USING_SMP is not set
|
||||
CONFIG_RT_ALIGN_SIZE=8
|
||||
# CONFIG_RT_THREAD_PRIORITY_8 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_32=y
|
||||
# CONFIG_RT_THREAD_PRIORITY_256 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_MAX=32
|
||||
CONFIG_RT_TICK_PER_SECOND=100
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
CONFIG_RT_USING_HOOK=y
|
||||
CONFIG_RT_HOOK_USING_FUNC_PTR=y
|
||||
CONFIG_RT_USING_IDLE_HOOK=y
|
||||
CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
|
||||
CONFIG_IDLE_THREAD_STACK_SIZE=256
|
||||
# CONFIG_RT_USING_TIMER_SOFT is not set
|
||||
|
||||
#
|
||||
# kservice optimization
|
||||
#
|
||||
CONFIG_RT_KSERVICE_USING_STDLIB=y
|
||||
# CONFIG_RT_KSERVICE_USING_STDLIB_MEMORY is not set
|
||||
# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
|
||||
# CONFIG_RT_USING_TINY_FFS is not set
|
||||
# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
|
||||
CONFIG_RT_DEBUG=y
|
||||
CONFIG_RT_DEBUG_COLOR=y
|
||||
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
|
||||
|
||||
#
|
||||
# Inter-Thread communication
|
||||
#
|
||||
CONFIG_RT_USING_SEMAPHORE=y
|
||||
CONFIG_RT_USING_MUTEX=y
|
||||
CONFIG_RT_USING_EVENT=y
|
||||
CONFIG_RT_USING_MAILBOX=y
|
||||
CONFIG_RT_USING_MESSAGEQUEUE=y
|
||||
# CONFIG_RT_USING_SIGNALS is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
CONFIG_RT_USING_MEMPOOL=y
|
||||
CONFIG_RT_USING_SMALL_MEM=y
|
||||
# CONFIG_RT_USING_SLAB is not set
|
||||
# CONFIG_RT_USING_MEMHEAP is not set
|
||||
CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y
|
||||
# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
|
||||
# CONFIG_RT_USING_SLAB_AS_HEAP is not set
|
||||
# CONFIG_RT_USING_USERHEAP is not set
|
||||
# CONFIG_RT_USING_NOHEAP is not set
|
||||
# CONFIG_RT_USING_MEMTRACE is not set
|
||||
# CONFIG_RT_USING_HEAP_ISR is not set
|
||||
CONFIG_RT_USING_HEAP=y
|
||||
|
||||
#
|
||||
# Kernel Device Object
|
||||
#
|
||||
CONFIG_RT_USING_DEVICE=y
|
||||
# CONFIG_RT_USING_DEVICE_OPS is not set
|
||||
# CONFIG_RT_USING_DM is not set
|
||||
# CONFIG_RT_USING_INTERRUPT_INFO is not set
|
||||
CONFIG_RT_USING_CONSOLE=y
|
||||
CONFIG_RT_CONSOLEBUF_SIZE=128
|
||||
CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
|
||||
CONFIG_RT_VER_NUM=0x50001
|
||||
# CONFIG_RT_USING_STDC_ATOMIC is not set
|
||||
# CONFIG_RT_USING_CACHE is not set
|
||||
CONFIG_RT_USING_HW_ATOMIC=y
|
||||
# CONFIG_ARCH_ARM_BOOTWITH_FLUSH_CACHE is not set
|
||||
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
|
||||
CONFIG_RT_USING_CPU_FFS=y
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_ARM_CORTEX_M=y
|
||||
CONFIG_ARCH_ARM_CORTEX_M3=y
|
||||
|
||||
#
|
||||
# RT-Thread Components
|
||||
#
|
||||
CONFIG_RT_USING_COMPONENTS_INIT=y
|
||||
CONFIG_RT_USING_USER_MAIN=y
|
||||
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
|
||||
CONFIG_RT_MAIN_THREAD_PRIORITY=10
|
||||
# CONFIG_RT_USING_LEGACY is not set
|
||||
CONFIG_RT_USING_MSH=y
|
||||
CONFIG_RT_USING_FINSH=y
|
||||
CONFIG_FINSH_USING_MSH=y
|
||||
CONFIG_FINSH_THREAD_NAME="tshell"
|
||||
CONFIG_FINSH_THREAD_PRIORITY=20
|
||||
CONFIG_FINSH_THREAD_STACK_SIZE=4096
|
||||
CONFIG_FINSH_USING_HISTORY=y
|
||||
CONFIG_FINSH_HISTORY_LINES=5
|
||||
CONFIG_FINSH_USING_SYMTAB=y
|
||||
CONFIG_FINSH_CMD_SIZE=80
|
||||
CONFIG_MSH_USING_BUILT_IN_COMMANDS=y
|
||||
CONFIG_FINSH_USING_DESCRIPTION=y
|
||||
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
|
||||
# CONFIG_FINSH_USING_AUTH is not set
|
||||
CONFIG_FINSH_ARG_MAX=10
|
||||
|
||||
#
|
||||
# DFS: device virtual file system
|
||||
#
|
||||
# CONFIG_RT_USING_DFS is not set
|
||||
# CONFIG_RT_USING_FAL is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_RT_USING_DEVICE_IPC=y
|
||||
CONFIG_RT_UNAMED_PIPE_NUMBER=64
|
||||
# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
|
||||
CONFIG_RT_USING_SERIAL=y
|
||||
CONFIG_RT_USING_SERIAL_V1=y
|
||||
# CONFIG_RT_USING_SERIAL_V2 is not set
|
||||
CONFIG_RT_SERIAL_USING_DMA=y
|
||||
CONFIG_RT_SERIAL_RB_BUFSZ=64
|
||||
# CONFIG_RT_USING_CAN is not set
|
||||
# CONFIG_RT_USING_HWTIMER is not set
|
||||
# CONFIG_RT_USING_CPUTIME is not set
|
||||
# CONFIG_RT_USING_I2C is not set
|
||||
# CONFIG_RT_USING_PHY is not set
|
||||
CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_RT_USING_ADC is not set
|
||||
# CONFIG_RT_USING_DAC is not set
|
||||
# CONFIG_RT_USING_NULL is not set
|
||||
# CONFIG_RT_USING_ZERO is not set
|
||||
# CONFIG_RT_USING_RANDOM is not set
|
||||
# CONFIG_RT_USING_PWM is not set
|
||||
# CONFIG_RT_USING_MTD_NOR is not set
|
||||
# CONFIG_RT_USING_MTD_NAND is not set
|
||||
# CONFIG_RT_USING_PM is not set
|
||||
# CONFIG_RT_USING_FDT is not set
|
||||
# CONFIG_RT_USING_RTC is not set
|
||||
# CONFIG_RT_USING_SDIO is not set
|
||||
# CONFIG_RT_USING_SPI is not set
|
||||
# CONFIG_RT_USING_WDT is not set
|
||||
# CONFIG_RT_USING_AUDIO is not set
|
||||
# CONFIG_RT_USING_SENSOR is not set
|
||||
# CONFIG_RT_USING_TOUCH is not set
|
||||
# CONFIG_RT_USING_LCD is not set
|
||||
# CONFIG_RT_USING_HWCRYPTO is not set
|
||||
# CONFIG_RT_USING_PULSE_ENCODER is not set
|
||||
# CONFIG_RT_USING_INPUT_CAPTURE is not set
|
||||
# CONFIG_RT_USING_DEV_BUS is not set
|
||||
# CONFIG_RT_USING_WIFI is not set
|
||||
# CONFIG_RT_USING_VIRTIO is not set
|
||||
|
||||
#
|
||||
# Using USB
|
||||
#
|
||||
# CONFIG_RT_USING_USB is not set
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
|
||||
#
|
||||
# C/C++ and POSIX layer
|
||||
#
|
||||
CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
|
||||
|
||||
#
|
||||
# POSIX (Portable Operating System Interface) layer
|
||||
#
|
||||
# CONFIG_RT_USING_POSIX_FS is not set
|
||||
# CONFIG_RT_USING_POSIX_DELAY is not set
|
||||
# CONFIG_RT_USING_POSIX_CLOCK is not set
|
||||
# CONFIG_RT_USING_POSIX_TIMER is not set
|
||||
# CONFIG_RT_USING_PTHREADS is not set
|
||||
# CONFIG_RT_USING_MODULE is not set
|
||||
|
||||
#
|
||||
# Interprocess Communication (IPC)
|
||||
#
|
||||
# CONFIG_RT_USING_POSIX_PIPE is not set
|
||||
# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set
|
||||
# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set
|
||||
|
||||
#
|
||||
# Socket is in the 'Network' category
|
||||
#
|
||||
# CONFIG_RT_USING_CPLUSPLUS is not set
|
||||
|
||||
#
|
||||
# Network
|
||||
#
|
||||
# CONFIG_RT_USING_SAL is not set
|
||||
# CONFIG_RT_USING_NETDEV is not set
|
||||
# CONFIG_RT_USING_LWIP is not set
|
||||
# CONFIG_RT_USING_AT is not set
|
||||
|
||||
#
|
||||
# Utilities
|
||||
#
|
||||
# CONFIG_RT_USING_RYM is not set
|
||||
# CONFIG_RT_USING_ULOG is not set
|
||||
# CONFIG_RT_USING_UTEST is not set
|
||||
# CONFIG_RT_USING_VAR_EXPORT is not set
|
||||
# CONFIG_RT_USING_ADT is not set
|
||||
# CONFIG_RT_USING_RT_LINK is not set
|
||||
# CONFIG_RT_USING_VBUS is not set
|
||||
CONFIG_SOC_FAMILY_STM32=y
|
||||
CONFIG_SOC_SERIES_STM32F1=y
|
||||
|
||||
#
|
||||
# Hardware Drivers Config
|
||||
#
|
||||
CONFIG_SOC_STM32F107xC=y
|
||||
|
||||
#
|
||||
# Onboard Peripheral Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# On-chip Peripheral Drivers
|
||||
#
|
||||
CONFIG_BSP_USING_GPIO=y
|
||||
CONFIG_BSP_USING_UART=y
|
||||
CONFIG_BSP_USING_UART4=y
|
||||
# CONFIG_BSP_USING_UDID is not set
|
||||
|
||||
#
|
||||
# Board extended module Drivers
|
||||
#
|
|
@ -0,0 +1,42 @@
|
|||
*.pyc
|
||||
*.map
|
||||
*.dblite
|
||||
*.elf
|
||||
*.bin
|
||||
*.hex
|
||||
*.axf
|
||||
*.exe
|
||||
*.pdb
|
||||
*.idb
|
||||
*.ilk
|
||||
*.old
|
||||
build
|
||||
Debug
|
||||
documentation/html
|
||||
packages/
|
||||
*~
|
||||
*.o
|
||||
*.obj
|
||||
*.out
|
||||
*.bak
|
||||
*.dep
|
||||
*.lib
|
||||
*.i
|
||||
*.d
|
||||
.DS_Stor*
|
||||
.config 3
|
||||
.config 4
|
||||
.config 5
|
||||
Midea-X1
|
||||
*.uimg
|
||||
GPATH
|
||||
GRTAGS
|
||||
GTAGS
|
||||
.vscode
|
||||
JLinkLog.txt
|
||||
JLinkSettings.ini
|
||||
DebugConfig/
|
||||
RTE/
|
||||
settings/
|
||||
*.uvguix*
|
||||
cconfig.h
|
|
@ -0,0 +1,22 @@
|
|||
mainmenu "RT-Thread Configuration"
|
||||
|
||||
config BSP_DIR
|
||||
string
|
||||
option env="BSP_ROOT"
|
||||
default "."
|
||||
|
||||
config RTT_DIR
|
||||
string
|
||||
option env="RTT_ROOT"
|
||||
default "rt-thread"
|
||||
|
||||
config PKGS_DIR
|
||||
string
|
||||
option env="PKGS_ROOT"
|
||||
default "packages"
|
||||
|
||||
source "$RTT_DIR/Kconfig"
|
||||
#source "$PKGS_DIR/Kconfig"
|
||||
source "libraries/Kconfig"
|
||||
source "board/Kconfig"
|
||||
|
|
@ -0,0 +1,123 @@
|
|||
# BSP README 模板
|
||||
|
||||
## 简介
|
||||
|
||||
本文档为 xxx 开发板的 BSP (板级支持包) 说明。
|
||||
|
||||
主要内容如下:
|
||||
|
||||
- 开发板资源介绍
|
||||
- BSP 快速上手
|
||||
- 进阶使用方法
|
||||
|
||||
通过阅读快速上手章节开发者可以快速地上手该 BSP,将 RT-Thread 运行在开发板上。在进阶使用指南章节,将会介绍更多高级功能,帮助开发者利用 RT-Thread 驱动更多板载资源。
|
||||
|
||||
## 开发板介绍
|
||||
|
||||
【此处简单介绍一下开发板】
|
||||
|
||||
开发板外观如下图所示:
|
||||
|
||||
![board](figures/board.png)
|
||||
|
||||
该开发板常用 **板载资源** 如下:
|
||||
|
||||
- MCU:STM32xxx,主频 xxxMHz,xxxKB FLASH ,xxxKB RAM
|
||||
- 外部 RAM:型号,xMB
|
||||
- 外部 FLASH:型号,xMB
|
||||
- 常用外设
|
||||
- LED:x个,DS0(红色,PB1),DS1(绿色,PB0)
|
||||
- 按键:x个,K0(兼具唤醒功能,PA0),K1(PC13)
|
||||
- 常用接口:USB 转串口、SD 卡接口、以太网接口、LCD 接口等
|
||||
- 调试接口,标准 JTAG/SWD
|
||||
|
||||
开发板更多详细信息请参考【厂商名】 [xxx开发板介绍](https://xxx)。
|
||||
|
||||
## 外设支持
|
||||
|
||||
本 BSP 目前对外设的支持情况如下:
|
||||
|
||||
| **板载外设** | **支持情况** | **备注** |
|
||||
| :----------------- | :----------: | :------------------------------------- |
|
||||
| USB 转串口 | 支持 | |
|
||||
| SPI Flash | 支持 | |
|
||||
| 以太网 | 支持 | |
|
||||
| SD卡 | 暂不支持 | |
|
||||
| CAN | 暂不支持 | |
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...176 |
|
||||
| UART | 支持 | UART1/x/x |
|
||||
| SPI | 支持 | SPI1/x/x |
|
||||
| I2C | 支持 | 软件 I2C |
|
||||
| SDIO | 暂不支持 | 即将支持 |
|
||||
| RTC | 暂不支持 | 即将支持 |
|
||||
| PWM | 暂不支持 | 即将支持 |
|
||||
| USB Device | 暂不支持 | 即将支持 |
|
||||
| USB Host | 暂不支持 | 即将支持 |
|
||||
| IWG | 暂不支持 | 即将支持 |
|
||||
| **扩展模块** | **支持情况** | **备注** |
|
||||
| xxx 模块 | 支持 | |
|
||||
|
||||
## 使用说明
|
||||
|
||||
使用说明分为如下两个章节:
|
||||
|
||||
- 快速上手
|
||||
|
||||
本章节是为刚接触 RT-Thread 的新手准备的使用说明,遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上,看到实验效果 。
|
||||
|
||||
- 进阶使用
|
||||
|
||||
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置,可以开启更多板载资源,实现更多高级功能。
|
||||
|
||||
|
||||
### 快速上手
|
||||
|
||||
本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程,并且支持 GCC 开发环境。下面以 MDK5 开发环境为例,介绍如何将系统运行起来。
|
||||
|
||||
#### 硬件连接
|
||||
|
||||
使用数据线连接开发板到 PC,打开电源开关。
|
||||
|
||||
#### 编译下载
|
||||
|
||||
双击 project.uvprojx 文件,打开 MDK5 工程,编译并下载程序到开发板。
|
||||
|
||||
> 工程默认配置使用 xxx 仿真器下载程序,在通过 xxx 连接开发板的基础上,点击下载按钮即可下载程序到开发板
|
||||
|
||||
#### 运行结果
|
||||
|
||||
下载程序成功之后,系统会自动运行,【这里写开发板运行起来之后的现象,如:LED 闪烁等】。
|
||||
|
||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口(115200-8-1-N),复位设备后,可以看到 RT-Thread 的输出信息:
|
||||
|
||||
```bash
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 3.1.1 build Nov 19 2018
|
||||
2006 - 2018 Copyright by rt-thread team
|
||||
msh >
|
||||
```
|
||||
### 进阶使用
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口1 的功能,如果需使用 SD 卡、Flash 等更多高级功能,需要利用 ENV 工具对BSP 进行配置,步骤如下:
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
2. 输入`menuconfig`命令配置工程,配置好之后保存退出。
|
||||
|
||||
3. 输入`pkgs --update`命令更新软件包。
|
||||
|
||||
4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
|
||||
|
||||
本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
|
||||
|
||||
## 注意事项
|
||||
|
||||
- xxx
|
||||
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
|
||||
- [xxx](https://个人主页), 邮箱:<xxx@xxx.com>
|
|
@ -0,0 +1,15 @@
|
|||
# for module compiling
|
||||
import os
|
||||
Import('RTT_ROOT')
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
objs = []
|
||||
list = os.listdir(cwd)
|
||||
|
||||
for d in list:
|
||||
path = os.path.join(cwd, d)
|
||||
if os.path.isfile(os.path.join(path, 'SConscript')):
|
||||
objs = objs + SConscript(os.path.join(d, 'SConscript'))
|
||||
|
||||
Return('objs')
|
|
@ -0,0 +1,67 @@
|
|||
import os
|
||||
import sys
|
||||
import rtconfig
|
||||
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
else:
|
||||
RTT_ROOT = os.path.normpath(os.getcwd() + '/../../../')
|
||||
|
||||
# set RTT_ROOT
|
||||
if not os.getenv("RTT_ROOT"):
|
||||
RTT_ROOT="rt-thread"
|
||||
|
||||
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
|
||||
try:
|
||||
from building import *
|
||||
except:
|
||||
print('Cannot found RT-Thread root directory, please check RTT_ROOT')
|
||||
print(RTT_ROOT)
|
||||
exit(-1)
|
||||
|
||||
TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
|
||||
|
||||
# Enviroment包含了编译过程用到的工具
|
||||
DefaultEnvironment(tools=[])
|
||||
env = Environment(tools = ['mingw'],
|
||||
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
|
||||
CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
|
||||
AR = rtconfig.AR, ARFLAGS = '-rc',
|
||||
CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
|
||||
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
|
||||
|
||||
# 向环境变量中添加路径
|
||||
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
|
||||
|
||||
if rtconfig.PLATFORM in ['iccarm']:
|
||||
env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
|
||||
env.Replace(ARFLAGS = [''])
|
||||
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
|
||||
|
||||
Export('RTT_ROOT')
|
||||
Export('rtconfig')
|
||||
|
||||
# 添加依赖库函数
|
||||
SDK_ROOT = os.path.abspath('.')
|
||||
if os.path.exists(SDK_ROOT + '/libraries'):
|
||||
libraries_path_prefix = SDK_ROOT + '/libraries'
|
||||
else:
|
||||
libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
|
||||
|
||||
SDK_LIB = libraries_path_prefix
|
||||
Export('SDK_LIB')
|
||||
|
||||
# prepare building environment
|
||||
objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
|
||||
|
||||
stm32_library = 'STM32F1xx_HAL'
|
||||
rtconfig.BSP_LIBRARY_TYPE = stm32_library
|
||||
|
||||
# include libraries
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
|
||||
|
||||
# include drivers
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
|
||||
|
||||
# make a building
|
||||
DoBuilding(TARGET, objs)
|
|
@ -0,0 +1,15 @@
|
|||
from building import *
|
||||
import os
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
src = Glob('*.c')
|
||||
CPPPATH = [cwd]
|
||||
|
||||
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
|
||||
|
||||
list = os.listdir(cwd)
|
||||
for item in list:
|
||||
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
|
||||
group = group + SConscript(os.path.join(item, 'SConscript'))
|
||||
|
||||
Return('group')
|
|
@ -0,0 +1,33 @@
|
|||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-11-06 SummerGift first version
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
#include <board.h>
|
||||
|
||||
/* defined the LED0 pin: PB1 */
|
||||
#define LED0_PIN GET_PIN(B, 1)
|
||||
|
||||
int main(void)
|
||||
{
|
||||
int count = 1;
|
||||
/* set LED0 pin mode to output */
|
||||
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
|
||||
|
||||
while (count++)
|
||||
{
|
||||
rt_pin_write(LED0_PIN, PIN_HIGH);
|
||||
rt_thread_mdelay(500);
|
||||
rt_pin_write(LED0_PIN, PIN_LOW);
|
||||
rt_thread_mdelay(500);
|
||||
}
|
||||
|
||||
return RT_EOK;
|
||||
}
|
|
@ -0,0 +1,25 @@
|
|||
[PreviousGenFiles]
|
||||
AdvancedFolderStructure=true
|
||||
HeaderFileListSize=3
|
||||
HeaderFiles#0=../Core/Inc/stm32f1xx_it.h
|
||||
HeaderFiles#1=../Core/Inc/stm32f1xx_hal_conf.h
|
||||
HeaderFiles#2=../Core/Inc/main.h
|
||||
HeaderFolderListSize=1
|
||||
HeaderPath#0=../Core/Inc
|
||||
HeaderFiles=;
|
||||
SourceFileListSize=3
|
||||
SourceFiles#0=../Core/Src/stm32f1xx_it.c
|
||||
SourceFiles#1=../Core/Src/stm32f1xx_hal_msp.c
|
||||
SourceFiles#2=../Core/Src/main.c
|
||||
SourceFolderListSize=1
|
||||
SourcePath#0=../Core/Src
|
||||
SourceFiles=;
|
||||
|
||||
[PreviousLibFiles]
|
||||
LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f107xc.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_armv8mbl.h;
|
||||
|
||||
[PreviousUsedIarFiles]
|
||||
SourceFiles=../Core/Src/main.c;../Core/Src/stm32f1xx_it.c;../Core/Src/stm32f1xx_hal_msp.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;../Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;../Core/Src/system_stm32f1xx.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;../Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;../Core/Src/system_stm32f1xx.c;;;
|
||||
HeaderPath=../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include;../Core/Inc;
|
||||
CDefines=USE_HAL_DRIVER;STM32F107xC;USE_HAL_DRIVER;USE_HAL_DRIVER;
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f1xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
|
@ -0,0 +1,391 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CONF_H
|
||||
#define __STM32F1xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
/*#define HAL_ADC_MODULE_ENABLED */
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/*#define HAL_CEC_MODULE_ENABLED */
|
||||
/*#define HAL_CORTEX_MODULE_ENABLED */
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
/*#define HAL_DMA_MODULE_ENABLED */
|
||||
/*#define HAL_ETH_MODULE_ENABLED */
|
||||
/*#define HAL_FLASH_MODULE_ENABLED */
|
||||
/*#define HAL_GPIO_MODULE_ENABLED */
|
||||
/*#define HAL_I2C_MODULE_ENABLED */
|
||||
/*#define HAL_I2S_MODULE_ENABLED */
|
||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||
/*#define HAL_NOR_MODULE_ENABLED */
|
||||
/*#define HAL_NAND_MODULE_ENABLED */
|
||||
/*#define HAL_PCCARD_MODULE_ENABLED */
|
||||
/*#define HAL_PCD_MODULE_ENABLED */
|
||||
/*#define HAL_HCD_MODULE_ENABLED */
|
||||
/*#define HAL_PWR_MODULE_ENABLED */
|
||||
/*#define HAL_RCC_MODULE_ENABLED */
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SD_MODULE_ENABLED */
|
||||
/*#define HAL_MMC_MODULE_ENABLED */
|
||||
/*#define HAL_SDRAM_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||
/*#define HAL_TIM_MODULE_ENABLED */
|
||||
/*#define HAL_UART_MODULE_ENABLED */
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority (lowest by default) */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32f1xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_HAL_CONF_H */
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_IT_H
|
||||
#define __STM32F1xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_IT_H */
|
|
@ -0,0 +1,176 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLL2State = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Configure the Systick interrupt time
|
||||
*/
|
||||
__HAL_RCC_PLLI2S_ENABLE();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
|
@ -0,0 +1,81 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_msp.c
|
||||
* @brief This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_AFIO_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
|
@ -0,0 +1,203 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f1xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M3 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Prefetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F1xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f1xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
|