86 lines
2.9 KiB
Matlab
86 lines
2.9 KiB
Matlab
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
% GTSAM Copyright 2010, Georgia Tech Research Corporation,
|
|
% Atlanta, Georgia 30332-0415
|
|
% All Rights Reserved
|
|
% Authors: Frank Dellaert, et al. (see THANKS for the full author list)
|
|
%
|
|
% See LICENSE for the license information
|
|
%
|
|
% @brief Simple robotics example using the pre-built planar SLAM domain
|
|
% @author Alex Cunningham
|
|
% @author Frank Dellaert
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
|
|
%% Assumptions
|
|
% - All values are axis aligned
|
|
% - Robot poses are facing along the X axis (horizontal, to the right in images)
|
|
% - We have bearing and range information for measurements
|
|
% - We have full odometry for measurements
|
|
% - The robot and landmarks are on a grid, moving 2 meters each step
|
|
% - Landmarks are 2 meters away from the robot trajectory
|
|
|
|
%% Create keys for variables
|
|
x1 = 1; x2 = 2; x3 = 3;
|
|
l1 = 1; l2 = 2;
|
|
|
|
%% Create graph container and add factors to it
|
|
graph = PlanarSLAMGraph;
|
|
|
|
%% Add prior
|
|
% gaussian for prior
|
|
prior_model = SharedDiagonal([0.3; 0.3; 0.1]);
|
|
prior_measurement = Pose2(0.0, 0.0, 0.0); % prior at origin
|
|
graph.addPrior(x1, prior_measurement, prior_model); % add directly to graph
|
|
|
|
%% Add odometry
|
|
% general noisemodel for odometry
|
|
odom_model = SharedDiagonal([0.2; 0.2; 0.1]);
|
|
odom_measurement = Pose2(2.0, 0.0, 0.0); % create a measurement for both factors (the same in this case)
|
|
graph.addOdometry(x1, x2, odom_measurement, odom_model);
|
|
graph.addOdometry(x2, x3, odom_measurement, odom_model);
|
|
|
|
%% Add measurements
|
|
% general noisemodel for measurements
|
|
meas_model = SharedDiagonal([0.1; 0.2]);
|
|
|
|
% create the measurement values - indices are (pose id, landmark id)
|
|
degrees = pi/180;
|
|
bearing11 = Rot2(45*degrees);
|
|
bearing21 = Rot2(90*degrees);
|
|
bearing32 = Rot2(90*degrees);
|
|
range11 = sqrt(4+4);
|
|
range21 = 2.0;
|
|
range32 = 2.0;
|
|
|
|
% create bearing/range factors and add them
|
|
graph.addBearingRange(x1, l1, bearing11, range11, meas_model);
|
|
graph.addBearingRange(x2, l1, bearing21, range21, meas_model);
|
|
graph.addBearingRange(x3, l2, bearing32, range32, meas_model);
|
|
|
|
% print
|
|
graph.print('full graph');
|
|
|
|
%% Initialize to noisy points
|
|
initialEstimate = PlanarSLAMValues;
|
|
initialEstimate.insertPose(x1, Pose2(0.5, 0.0, 0.2));
|
|
initialEstimate.insertPose(x2, Pose2(2.3, 0.1,-0.2));
|
|
initialEstimate.insertPose(x3, Pose2(4.1, 0.1, 0.1));
|
|
initialEstimate.insertPoint(l1, Landmark2(1.8, 2.1));
|
|
initialEstimate.insertPoint(l2, Landmark2(4.1, 1.8));
|
|
|
|
initialEstimate.print('initial estimate');
|
|
|
|
%% Optimize using Levenberg-Marquardt optimization with an ordering from colamd
|
|
result = graph.optimize_(initialEstimate);
|
|
result.print('final result');
|
|
|
|
%% Print out the corresponding dense matrix
|
|
ord = graph.orderingCOLAMD(result);
|
|
gfg = graph.linearize(result,ord);
|
|
denseAb = gfg.denseJacobian
|
|
|
|
%% Get sparse matrix
|
|
IJS = gfg.sparse([12 7 4 10 1 14]');
|
|
Ab=sparse(IJS(1,:),IJS(2,:),IJS(3,:));
|
|
spy(Ab);
|