67 lines
3.3 KiB
ReStructuredText
67 lines
3.3 KiB
ReStructuredText
.. Copyright 2016 The Cartographer Authors
|
|
|
|
.. Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
.. http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
.. Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
|
|
==========================
|
|
Frequently asked questions
|
|
==========================
|
|
|
|
Why is laser data rate in the 3D bags higher than the maximum reported 20 Hz rotation speed of the VLP-16?
|
|
----------------------------------------------------------------------------------------------------------
|
|
|
|
The VLP-16 in the example bags is configured to rotate at 20 Hz. However, the
|
|
frequency of UDP packets the VLP-16 sends is much higher and independent of
|
|
the rotation frequency. The example bags contain a `sensor_msgs/PointCloud2`__
|
|
per UDP packet, not one per revolution.
|
|
|
|
__ http://www.ros.org/doc/api/sensor_msgs/html/msg/PointCloud2.html
|
|
|
|
In the `corresponding Cartographer configuration file`__ you see
|
|
`TRAJECTORY_BUILDER_3D.scans_per_accumulation = 160` which means we accumulate
|
|
160 per-UDP-packet point clouds into one larger point cloud, which
|
|
incorporates motion estimation by combining constant velocity and IMU
|
|
measurements, for matching. Since there are two VLP-16s, 160 UDP packets is
|
|
enough for roughly 2 revolutions, one per VLP-16.
|
|
|
|
__ https://github.com/googlecartographer/cartographer_ros/blob/master/cartographer_ros/configuration_files/backpack_3d.lua
|
|
|
|
Why is IMU data required for 3D SLAM but not for 2D?
|
|
----------------------------------------------------
|
|
|
|
In 2D, Cartographer supports running the correlative scan matcher, which is normally used for finding loop closure constraints, for local SLAM.
|
|
It is computationally expensive but can often render the incorporation of odometry or IMU data unnecessary.
|
|
2D also has the benefit of assuming a flat world, i.e. up is implicitly defined.
|
|
|
|
In 3D, an IMU is required mainly for measuring gravity.
|
|
Gravity is an attractive quantity to measure since it does not drift and is a very strong signal and typically comprises most of any measured accelerations.
|
|
Gravity is needed for two reasons:
|
|
|
|
1. There are no assumptions about the world in 3D.
|
|
To properly world align the resulting trajectory and map, gravity is used to define the z-direction.
|
|
|
|
2. Roll and pitch can be derived quite well from IMU readings once the direction of gravity has been established.
|
|
This saves work for the scan matcher by reducing the search window in these dimensions.
|
|
|
|
How do I build cartographer_ros without rviz support?
|
|
-----------------------------------------------------
|
|
|
|
The simplest solution is to create an empty file named `CATKIN_IGNORE`__ in the `cartographer_rviz` package directory.
|
|
|
|
__ http://wiki.ros.org/catkin/workspaces
|
|
|
|
How do I fix the "You called InitGoogleLogging() twice!" error?
|
|
---------------------------------------------------------------
|
|
|
|
Building `rosconsole` with the `glog` back end can lead to this error.
|
|
Use the `log4cxx` or `print` back end, selectable via the `ROSCONSOLE_BACKEND` CMake argument, to avoid this issue.
|