.. Copyright 2016 The Cartographer Authors

.. Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at

..      http://www.apache.org/licenses/LICENSE-2.0

.. Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.

=======================
Configuration Reference
=======================

Note that Cartographer's ROS integration uses `tf2`_, thus all frame IDs are
expected to contain only a frame name (lower-case with underscores) and no
prefix or slashes. See `REP 105`_ for commonly used coordinate frames.

Note that topic names are given as *base* names (see `ROS Names`_) in
Cartographer's ROS integration. This means it is up to the user of the
Cartographer node to remap, or put them into a namespace.

The following are Cartographer's ROS integration top-level options, all of which
must be specified in the Lua configuration file:

map_frame
  The ROS frame ID to use for publishing submaps, the parent frame of poses,
  usually "map".

tracking_frame
  The ROS frame ID of the frame that is tracked by the SLAM algorithm. If an IMU
  is used, it should be at its position, although it might be rotated. A common
  choice is "imu_link".

published_frame
  The ROS frame ID to use as the child frame for publishing poses. For example
  "odom" if an "odom" frame is supplied by a different part of the system. In
  this case the pose of "odom" in the *map_frame* will be published. Otherwise,
  setting it to "base_link" is likely appropriate.

odom_frame
  Only used if *provide_odom_frame* is true. The frame between *published_frame*
  and *map_frame* to be used for publishing the (non-loop-closed) local SLAM
  result. Usually "odom".

provide_odom_frame
  If enabled, the local, non-loop-closed, continuous pose will be published as
  the *odom_frame* in the *map_frame*.

use_odometry_data
  If enabled, subscribes to `nav_msgs::Odometry`_ on the topic "odom". Odometry
  must be provided in this case, and the information will be included in SLAM.

use_constant_odometry_variance
  If enabled, the configured variances will be used instead of the ones provided
  in the Odometry messages.

constant_odometry_translational_variance
  The variance to use for the translational component of odometry to use if
  *use_constant_odometry_variance* is enabled.

constant_odometry_rotational_variance
  The variance to use for the rotational component of odometry to use if
  *use_constant_odometry_variance* is enabled.

use_horizontal_laser
  If enabled, the node subscribes to `sensor_msgs::LaserScan`_ on the "scan"
  topic. If 2D SLAM is used, either this or *use_horizontal_multi_echo_laser*
  must be enabled.

use_horizontal_multi_echo_laser
  If enabled, the node subscribes to  `sensor_msgs::MultiEchoLaserScan`_ on the
  "echoes" topic. If 2D SLAM is used, either this or *use_horizontal_laser*
  must be enabled.

horizontal_laser_min_range
  Range in meters below which laser returns are ignored for the purpose of SLAM.

horizontal_laser_max_range
  Range in meters above which laser returns are ignored for the purpose of SLAM.

horizontal_laser_missing_echo_ray_length
  Range in meters to use for inserting free space when no laser return was
  detected.

num_lasers_3d
  Number of 3D lasers to subscribe to. Must be a positive value if and only if
  using 3D SLAM. Subscribes to `sensor_msgs::PointCloud2`_ on the "points2"
  topic for one laser, or topics "points2_1", "points2_2", etc for multiple
  lasers.

lookup_transform_timeout_sec
  Timeout in seconds to use for looking up transforms using `tf2`_.

submap_publish_period_sec
  Interval in seconds at which to publish the submap poses, e.g. 0.3 seconds.

pose_publish_period_sec
  Interval in seconds at which to publish poses, e.g. 5e-3 for a frequency of
  200 Hz.

.. _REP 105: http://www.ros.org/reps/rep-0105.html
.. _ROS Names: http://wiki.ros.org/Names
.. _nav_msgs::OccupancyGrid: http://docs.ros.org/api/nav_msgs/html/msg/OccupancyGrid.html
.. _nav_msgs::Odometry: http://docs.ros.org/api/nav_msgs/html/msg/Odometry.html
.. _sensor_msgs::LaserScan: http://docs.ros.org/api/sensor_msgs/html/msg/LaserScan.html
.. _sensor_msgs::MultiEchoLaserScan: http://docs.ros.org/api/sensor_msgs/html/msg/MultiEchoLaserScan.html
.. _sensor_msgs::PointCloud2: http://docs.ros.org/api/sensor_msgs/html/msg/PointCloud2.html
.. _tf2: http://wiki.ros.org/tf2