/** ****************************************************************************** * @file stm32f0xx_can.h * @author MCD Application Team * @version V1.5.1 * @date 13-October-2021 * @brief This file contains all the functions prototypes for the CAN firmware * library, applicable only for STM32F072 devices. ****************************************************************************** * @attention * * Copyright (c) 2014 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_CAN_H #define __STM32F0xx_CAN_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx.h" /** @addtogroup STM32F0xx_StdPeriph_Driver * @{ */ /** @addtogroup CAN * @{ */ /* Exported types ------------------------------------------------------------*/ #define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN)) /** * @brief CAN init structure definition */ typedef struct { uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. It ranges from 1 to 1024. */ uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. This parameter can be a value of @ref CAN_operating_mode */ uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta the CAN hardware is allowed to lengthen or shorten a bit to perform resynchronization. This parameter can be a value of @ref CAN_synchronisation_jump_width */ uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit Segment 1. This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */ uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit Segment 2. This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode. This parameter can be set either to ENABLE or DISABLE. */ FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off management. This parameter can be set either to ENABLE or DISABLE. */ FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. This parameter can be set either to ENABLE or DISABLE. */ FunctionalState CAN_NART; /*!< Enable or disable the non-automatic retransmission mode. This parameter can be set either to ENABLE or DISABLE. */ FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. This parameter can be set either to ENABLE or DISABLE. */ FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. This parameter can be set either to ENABLE or DISABLE. */ } CAN_InitTypeDef; /** * @brief CAN filter init structure definition */ typedef struct { uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit configuration, first one for a 16-bit configuration). This parameter can be a value between 0x0000 and 0xFFFF */ uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit configuration, second one for a 16-bit configuration). This parameter can be a value between 0x0000 and 0xFFFF */ uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, according to the mode (MSBs for a 32-bit configuration, first one for a 16-bit configuration). This parameter can be a value between 0x0000 and 0xFFFF */ uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, according to the mode (LSBs for a 32-bit configuration, second one for a 16-bit configuration). This parameter can be a value between 0x0000 and 0xFFFF */ uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. This parameter can be a value of @ref CAN_filter_FIFO */ uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. This parameter can be a value of @ref CAN_filter_mode */ uint8_t CAN_FilterScale; /*!< Specifies the filter scale. This parameter can be a value of @ref CAN_filter_scale */ FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. This parameter can be set either to ENABLE or DISABLE. */ } CAN_FilterInitTypeDef; /** * @brief CAN Tx message structure definition */ typedef struct { uint32_t StdId; /*!< Specifies the standard identifier. This parameter can be a value between 0 to 0x7FF. */ uint32_t ExtId; /*!< Specifies the extended identifier. This parameter can be a value between 0 to 0x1FFFFFFF. */ uint8_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted. This parameter can be a value of @ref CAN_identifier_type */ uint8_t RTR; /*!< Specifies the type of frame for the message that will be transmitted. This parameter can be a value of @ref CAN_remote_transmission_request */ uint8_t DLC; /*!< Specifies the length of the frame that will be transmitted. This parameter can be a value between 0 to 8 */ uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 to 0xFF. */ } CanTxMsg; /** * @brief CAN Rx message structure definition */ typedef struct { uint32_t StdId; /*!< Specifies the standard identifier. This parameter can be a value between 0 to 0x7FF. */ uint32_t ExtId; /*!< Specifies the extended identifier. This parameter can be a value between 0 to 0x1FFFFFFF. */ uint8_t IDE; /*!< Specifies the type of identifier for the message that will be received. This parameter can be a value of @ref CAN_identifier_type */ uint8_t RTR; /*!< Specifies the type of frame for the received message. This parameter can be a value of @ref CAN_remote_transmission_request */ uint8_t DLC; /*!< Specifies the length of the frame that will be received. This parameter can be a value between 0 to 8 */ uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to 0xFF. */ uint8_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through. This parameter can be a value between 0 to 0xFF */ } CanRxMsg; /* Exported constants --------------------------------------------------------*/ /** @defgroup CAN_Exported_Constants * @{ */ /** @defgroup CAN_InitStatus * @{ */ #define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ #define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ /* Legacy defines */ #define CANINITFAILED CAN_InitStatus_Failed #define CANINITOK CAN_InitStatus_Success /** * @} */ /** @defgroup CAN_operating_mode * @{ */ #define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ #define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ #define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ #define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ #define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ ((MODE) == CAN_Mode_LoopBack)|| \ ((MODE) == CAN_Mode_Silent) || \ ((MODE) == CAN_Mode_Silent_LoopBack)) /** * @} */ /** * @defgroup CAN_operating_mode * @{ */ #define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ #define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ #define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ #define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ ((MODE) == CAN_OperatingMode_Normal)|| \ ((MODE) == CAN_OperatingMode_Sleep)) /** * @} */ /** * @defgroup CAN_operating_mode_status * @{ */ #define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ #define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ /** * @} */ /** @defgroup CAN_synchronisation_jump_width * @{ */ #define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ #define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ #define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ #define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ #define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) /** * @} */ /** @defgroup CAN_time_quantum_in_bit_segment_1 * @{ */ #define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ #define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ #define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ #define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ #define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ #define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ #define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ #define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ #define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ #define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ #define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ #define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ #define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ #define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ #define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ #define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ #define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) /** * @} */ /** @defgroup CAN_time_quantum_in_bit_segment_2 * @{ */ #define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ #define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ #define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ #define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ #define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ #define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ #define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ #define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ #define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) /** * @} */ /** @defgroup CAN_clock_prescaler * @{ */ #define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) /** * @} */ /** @defgroup CAN_filter_number * @{ */ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) /** * @} */ /** @defgroup CAN_filter_mode * @{ */ #define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ #define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ #define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ ((MODE) == CAN_FilterMode_IdList)) /** * @} */ /** @defgroup CAN_filter_scale * @{ */ #define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ #define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ #define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ ((SCALE) == CAN_FilterScale_32bit)) /** * @} */ /** @defgroup CAN_filter_FIFO * @{ */ #define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ #define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ #define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ ((FIFO) == CAN_FilterFIFO1)) /* Legacy defines */ #define CAN_FilterFIFO0 CAN_Filter_FIFO0 #define CAN_FilterFIFO1 CAN_Filter_FIFO1 /** * @} */ /** @defgroup CAN_Start_bank_filter_for_slave_CAN * @{ */ #define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) /** * @} */ /** @defgroup CAN_Tx * @{ */ #define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) #define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) #define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) #define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) /** * @} */ /** @defgroup CAN_identifier_type * @{ */ #define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ #define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ #define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ ((IDTYPE) == CAN_Id_Extended)) /* Legacy defines */ #define CAN_ID_STD CAN_Id_Standard #define CAN_ID_EXT CAN_Id_Extended /** * @} */ /** @defgroup CAN_remote_transmission_request * @{ */ #define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ #define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ #define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) /* Legacy defines */ #define CAN_RTR_DATA CAN_RTR_Data #define CAN_RTR_REMOTE CAN_RTR_Remote /** * @} */ /** @defgroup CAN_transmit_constants * @{ */ #define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ #define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ #define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ #define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ /* Legacy defines */ #define CANTXFAILED CAN_TxStatus_Failed #define CANTXOK CAN_TxStatus_Ok #define CANTXPENDING CAN_TxStatus_Pending #define CAN_NO_MB CAN_TxStatus_NoMailBox /** * @} */ /** @defgroup CAN_receive_FIFO_number_constants * @{ */ #define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ #define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ #define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) /** * @} */ /** @defgroup CAN_sleep_constants * @{ */ #define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ #define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ /* Legacy defines */ #define CANSLEEPFAILED CAN_Sleep_Failed #define CANSLEEPOK CAN_Sleep_Ok /** * @} */ /** @defgroup CAN_wake_up_constants * @{ */ #define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ #define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ /* Legacy defines */ #define CANWAKEUPFAILED CAN_WakeUp_Failed #define CANWAKEUPOK CAN_WakeUp_Ok /** * @} */ /** * @defgroup CAN_Error_Code_constants * @{ */ #define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ #define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ #define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ #define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ #define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ #define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ #define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ #define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ /** * @} */ /** @defgroup CAN_flags * @{ */ /* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() and CAN_ClearFlag() functions. */ /* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */ /* Transmit Flags */ #define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ #define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ #define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ /* Receive Flags */ #define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ #define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ #define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ #define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ #define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ #define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ /* Operating Mode Flags */ #define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ #define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ /* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. In this case the SLAK bit can be polled.*/ /* Error Flags */ #define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ #define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ #define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ #define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ #define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ ((FLAG) == CAN_FLAG_SLAK )) #define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) /** * @} */ /** @defgroup CAN_interrupts * @{ */ #define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ /* Receive Interrupts */ #define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ #define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ #define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ #define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ #define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ #define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ /* Operating Mode Interrupts */ #define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ #define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ /* Error Interrupts */ #define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ #define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ #define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ #define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ #define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ /* Flags named as Interrupts : kept only for FW compatibility */ #define CAN_IT_RQCP0 CAN_IT_TME #define CAN_IT_RQCP1 CAN_IT_TME #define CAN_IT_RQCP2 CAN_IT_TME #define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) #define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /* Function used to set the CAN configuration to the default reset state *****/ void CAN_DeInit(CAN_TypeDef* CANx); /* Initialization and Configuration functions *********************************/ uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); void CAN_SlaveStartBank(uint8_t CAN_BankNumber); void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); /* CAN Frames Transmission functions ******************************************/ uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); /* CAN Frames Reception functions *********************************************/ void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); /* Operation modes functions **************************************************/ uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); uint8_t CAN_Sleep(CAN_TypeDef* CANx); uint8_t CAN_WakeUp(CAN_TypeDef* CANx); /* CAN Bus Error management functions *****************************************/ uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); /* Interrupts and flags management functions **********************************/ void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); #ifdef __cplusplus } #endif #endif /* __STM32F0xx_CAN_H */ /** * @} */ /** * @} */