diff --git a/Libraries/CMSIS/Device/STM32F0xx/Include/stm32f0xx.h b/Libraries/CMSIS/Device/STM32F0xx/Include/stm32f0xx.h new file mode 100644 index 0000000..2cfb6a9 --- /dev/null +++ b/Libraries/CMSIS/Device/STM32F0xx/Include/stm32f0xx.h @@ -0,0 +1,5707 @@ +/** + ****************************************************************************** + * @file stm32f0xx.h + * @author MCD Application Team + * @version V1.5.2 + * @date 13-October-2021 + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F0xx devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx + * @{ + */ + +#ifndef __STM32F0XX_H +#define __STM32F0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32F0 device used in your + application + */ + +#if !defined (STM32F030) && !defined (STM32F031) && !defined (STM32F051) && \ + !defined (STM32F072) && !defined (STM32F042) && !defined (STM32F091) && \ + !defined (STM32F070xB) && !defined (STM32F070x6) && !defined (STM32F030xC) + /* #define STM32F030 */ + /* #define STM32F031 */ + /* #define STM32F051 */ + /* #define STM32F072 */ + /* #define STM32F070xB */ + /* #define STM32F042 */ + /* #define STM32F070x6 */ + /* #define STM32F091 */ + /* #define STM32F030xC */ +#endif /* STM32F030 || STM32F031 || STM32F051 || STM32F072 || STM32F042 || STM32F091 || + STM32F070xB || STM32F070x6 || STM32F030xC */ + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +/* Old STM32F0XX definition, maintained for legacy purpose */ +#if defined(STM32F0XX) || defined(STM32F0XX_MD) + #define STM32F051 +#endif /* STM32F0XX */ + +/* Old STM32F0XX_LD definition, maintained for legacy purpose */ +#ifdef STM32F0XX_LD + #define STM32F031 +#endif /* STM32F0XX_LD */ + +/* Old STM32F0XX_HD definition, maintained for legacy purpose */ +#ifdef STM32F0XX_HD + #define STM32F072 +#endif /* STM32F0XX_HD */ + +/* Old STM32F030X6/X8 definition, maintained for legacy purpose */ +#if defined (STM32F030X8) || defined (STM32F030X6) + #define STM32F030 +#endif /* STM32F030X8 or STM32F030X6 */ + + +#if !defined (STM32F030) && !defined (STM32F031) && !defined (STM32F051) && \ + !defined (STM32F072) && !defined (STM32F042) && !defined (STM32F091) && \ + !defined (STM32F070xB) && !defined (STM32F070x6) && !defined (STM32F030xC) + #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" +#endif /* STM32F030 || STM32F031 || STM32F051 || STM32F072 || STM32F042 || STM32F091 || + STM32F070xB || STM32F070x6 || STM32F030xC */ + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif /* USE_STDPERIPH_DRIVER */ + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x5000) /*!< Time out for HSE start up */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) +#define HSI_STARTUP_TIMEOUT ((uint16_t)0x5000) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal High Speed oscillator in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI_VALUE */ + +#if !defined (HSI14_VALUE) +#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE ((uint32_t)40000) /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief STM32F0xx Standard Peripheral Library version number V1.5.2 + */ +#define __STM32F0XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F0XX_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ +#define __STM32F0XX_STDPERIPH_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */ +#define __STM32F0XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0XX_STDPERIPH_VERSION ((__STM32F0XX_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F0XX_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F0XX_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F0XX_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief STM32F0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +#define __CM0_REV 0 /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */ +#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/*!< Interrupt Number Definition */ +typedef enum IRQn +{ +/****** Cortex-M0 Processor Exceptions Numbers ******************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ + +#if defined (STM32F051) +/****** STM32F051 specific Interrupt Numbers *************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_IRQn = 4, /*!< RCC Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TS_IRQn = 8, /*!< Touch sense controller Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM6_DAC_IRQn = 17, /*!< TIM6 and DAC Interrupts */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + CEC_IRQn = 30 /*!< CEC Interrupt */ +#elif defined (STM32F031) +/****** STM32F031 specific Interrupt Numbers *************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_IRQn = 4, /*!< RCC Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + USART1_IRQn = 27 /*!< USART1 Interrupt */ +#elif defined (STM32F030) +/****** STM32F030 specific Interrupt Numbers *************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_IRQn = 4, /*!< RCC Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28 /*!< USART2 Interrupt */ +#elif defined (STM32F072) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD and VDDIO2 supply comparator through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TSC_IRQn = 8, /*!< TSC Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM6_DAC_IRQn = 17, /*!< TIM6 and DAC Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 Interrupts */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + USART3_4_IRQn = 29, /*!< USART3 and USART4 Interrupts */ + CEC_CAN_IRQn = 30, /*!< CEC and CAN Interrupts */ + USB_IRQn = 31 /*!< USB Low Priority global Interrupt */ +#elif defined (STM32F042) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD and VDDIO2 supply comparator through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TSC_IRQn = 8, /*!< TSC Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4, Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + CEC_CAN_IRQn = 30, /*!< CEC and CAN Interrupts */ + USB_IRQn = 31 /*!< USB Low Priority global Interrupt */ +#elif defined (STM32F091) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupts through EXTI Lines 16 and 31 */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC & CRS Global Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */ + DMA1_Ch1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Ch2_3_DMA2_Ch1_2_IRQn = 10, /*!< DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 Interrupts */ + DMA1_Ch4_7_DMA2_Ch3_5_IRQn = 11, /*!< DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC, COMP1 and COMP2 Interrupts (EXTI Lines 21 and 22) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ + I2C2_IRQn = 24, /*!< I2C2 Event Interrupt & EXTI Line24 Interrupt (I2C2 wakeup) */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 global Interrupt */ + USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */ + USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */ + USART3_8_IRQn = 29, /*!< USART3 to USART8 global Interrupts */ + CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */ +#elif defined (STM32F070xB) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC Global Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_IRQn = 17, /*!< TIM6 global Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ + I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 global Interrupt */ + USART1_IRQn = 27, /*!< USART1 global Interrupt */ + USART2_IRQn = 28, /*!< USART2 global Interrupt */ + USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupts */ + USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */ +#elif defined (STM32F070x6) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC Global Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */ + USART2_IRQn = 28, /*!< USART2 global Interrupt */ + USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */ +#elif defined (STM32F030xC) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC Global Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_IRQn = 17, /*!< TIM6 global Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ + I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 global Interrupt */ + USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */ + USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */ + USART3_6_IRQn = 29, /*!< USART3 to USART6 global Interrupts */ +#endif /* STM32F051 */ +}IRQn_Type; + +/** + * @} + */ + +#include "core_cm0.h" +#include "system_stm32f0xx.h" +#include + +/** @addtogroup Exported_macros + * @{ + */ +#define UNUSED(X) (void)X + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */ + __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */ + __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */ + __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */ + __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */ + __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */ + uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */ + uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */ + __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief HDMI-CEC + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x1C */ +} COMP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ + uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4*/ + __IO uint32_t RMPCR; /*!< Remap control register, Address offset: 0xA8 */ +}DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*! exti[31] Interrupt */ +#define SYSCFG_ITLINE1_SR_VDDIO2 ((uint32_t)0x00000002) /*!< VDDIO2 -> exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_WAKEUP ((uint32_t)0x00000001) /*!< RTC WAKEUP -> exti[20] Interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_TSTAMP ((uint32_t)0x00000002) /*!< RTC Time Stamp -> exti[19] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_ALRA ((uint32_t)0x00000003) /*!< RTC Alarm -> exti[17] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF ((uint32_t)0x00000001) /*!< Flash ITF Interrupt */ +#define SYSCFG_ITLINE4_SR_CRS ((uint32_t)0x00000001) /*!< CRS interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL ((uint32_t)0x00000002) /*!< CLK CTRL interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0 ((uint32_t)0x00000001) /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1 ((uint32_t)0x00000002) /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2 ((uint32_t)0x00000001) /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3 ((uint32_t)0x00000002) /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4 ((uint32_t)0x00000001) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5 ((uint32_t)0x00000002) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI6 ((uint32_t)0x00000004) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI7 ((uint32_t)0x00000008) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI8 ((uint32_t)0x00000010) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI9 ((uint32_t)0x00000020) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI10 ((uint32_t)0x00000040) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI11 ((uint32_t)0x00000080) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI12 ((uint32_t)0x00000100) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI13 ((uint32_t)0x00000200) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI14 ((uint32_t)0x00000400) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI15 ((uint32_t)0x00000800) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE8_SR_TSC_EOA ((uint32_t)0x00000001) /*!< Touch control EOA Interrupt */ +#define SYSCFG_ITLINE8_SR_TSC_MCE ((uint32_t)0x00000002) /*!< Touch control MCE Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 ((uint32_t)0x00000001) /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 ((uint32_t)0x00000001) /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 ((uint32_t)0x00000002) /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA2_CH1 ((uint32_t)0x00000004) /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA2_CH2 ((uint32_t)0x00000008) /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 ((uint32_t)0x00000001) /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 ((uint32_t)0x00000002) /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 ((uint32_t)0x00000004) /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 ((uint32_t)0x00000008) /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 ((uint32_t)0x00000010) /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 ((uint32_t)0x00000020) /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 ((uint32_t)0x00000040) /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC ((uint32_t)0x00000001) /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1 ((uint32_t)0x00000002) /*!< COMP1 Interrupt -> exti[21] */ +#define SYSCFG_ITLINE12_SR_COMP2 ((uint32_t)0x00000004) /*!< COMP2 Interrupt -> exti[22] */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK ((uint32_t)0x00000001) /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD ((uint32_t)0x00000002) /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG ((uint32_t)0x00000004) /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU ((uint32_t)0x00000008) /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC ((uint32_t)0x00000001) /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB ((uint32_t)0x00000001) /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB ((uint32_t)0x00000001) /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC ((uint32_t)0x00000001) /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB ((uint32_t)0x00000002) /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB ((uint32_t)0x00000001) /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB ((uint32_t)0x00000001) /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB ((uint32_t)0x00000001) /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB ((uint32_t)0x00000001) /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB ((uint32_t)0x00000001) /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB ((uint32_t)0x00000001) /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB ((uint32_t)0x00000001) /*!< I2C2 GLB Interrupt */ +#define SYSCFG_ITLINE25_SR_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2 ((uint32_t)0x00000001) /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB ((uint32_t)0x00000001) /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB ((uint32_t)0x00000001) /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_USART3_GLB ((uint32_t)0x00000001) /*!< USART3 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE29_SR_USART4_GLB ((uint32_t)0x00000002) /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART5_GLB ((uint32_t)0x00000004) /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB ((uint32_t)0x00000008) /*!< USART6 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART7_GLB ((uint32_t)0x00000010) /*!< USART7 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART8_GLB ((uint32_t)0x00000020) /*!< USART8 GLB Interrupt */ +#define SYSCFG_ITLINE30_SR_CAN ((uint32_t)0x00000001) /*!< CAN Interrupt */ +#define SYSCFG_ITLINE30_SR_CEC ((uint32_t)0x00000002) /*!< CEC Interrupt */ + +/******************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*! + + + + + + + + + + + + + + + + +Release Notes for STM32F0xx CMSIS + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F0xx CMSIS

+

Copyright 2016 STMicroelectronics

+

+
+ + + + + + + +
+ +

Update History

+

V1.5.2 / 13-October-2021

+ + + + +

Main +Changes

+
    +
  • All source files: update disclaimer to add reference to the new license agreement.
    • +
  • Add new CMSIS Macro:
    • +
      +
    • #define UNUSED(X) (void)X
      • +
    +
  • Update __IRQn &  __IRQHandler aliases for STM32F042 device.
    • +
      +
    • DMA1_Channel4_5_IRQn to DMA1_Channel4_5_6_7_IRQn
      • +
    • DMA1_Ch4_7_DMA2_Ch3_5_IRQn to DMA1_Ch4_7_DMA2_Ch3_5_IRQn
      +
      • +
    • DMA1_Channel4_5_IRQHandler to DMA1_Channel4_5_6_7_IRQHandler
      • +
    • DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler to DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
      +
      • +
    + + +
+

V1.5.0 / 05-December-2014

+ + +

Main +Changes

+ + + +
  • Add the support of the STM32F070xC, STM32F70xB and STM32F30xC devices.
  • stm32f0xx.h
    • Update IRQn enum to support the STM32F070xC, STM32F70xB and STM32F30xC devices.
    • Add Aliases for IRQn and IRQHandler .
  • Add new startup files.for STM32F070xC, STM32F70xB and STM32F30xC devices for the supported compilers.

V1.4.0 / 24-July-2014

+ + +

Main +Changes

+ + + +
  • Add the support of the STM32F091 devices.
  • stm32f0xx.h
    • Update IRQn enum to support the STM32F091 devices.
    • Add Aliases for IRQn and IRQHandler .
    • Add bits definition for new bits added in RCC registers.
    • Add bits definition for new bits added in SYSCFG registers.
    • Add bits definition for DMAxRMP_CR registers.
    • Add the definition of the USART5, USART6, USART7, USART8, DMA2_Channel1, DMA2_Channel2, DMA2_Channel3, DMA2_Channel4 and DMA2_Channel5.
  • Add new startup files.startup_stm32f091.s for the STM32F091 devices for the supported compilers. V1.3.2 / 27-March-2014

V1.3.1 / 17-January-2014

+ + +

Main +Changes

+ + + +
  • TrueSTUDIO and gcc_ride7 startup files update for STM32F042 and STM32F072 devices.

V1.3.0 / 16-January-2014

+ + +

Main +Changes

+ + + +
  • Add the support of the STM32F072 and STM32F042 devices.
  • Update devices names definition to be in line with the new new STM32F0xx family devices names.
    • STM32F0XX_MD  replaced by STM32F051.
    • STM32F0XX_LD  replaced by STM32F031.
    • STM32F030x8 and STM32F030x6 replaced by STM32F030.
  • stm32f0xx.h
    • Upddate to support the new STM32F0xx family devices names.
      • STM32F0XX_MD  replaced by STM32F051
      • STM32F0XX_LD  replaced by STM32F031
    • Update IRQn enum to support the STM32F042 and STM32F072 devices.
    • Add define for HSI48_VALUE.
    • Add CAN peripheral registers declaration and bits definition.
    • Add CRS peripheral registers declaration and bits definition.
    • Update CRC_TypeDef  structure definition to add POL register.
    • Update DAC_TypeDef structure to add DAC Channel 2 configuration registers.
    • Update OB_TypeDef structure by adding DATA0, DATA1, WRP2 and WRP3 option bytes registers.
    • Rename CAL registers to CALR in the RTC_TypeDef structure.
    • Add the definition of the TIM7, USART3, USART4, CAN, CRS, DMA1_Channel6, DMA1_Channel7 and GPIOE.
    • Add bit definition for FLASH_OBR_nBOOT0, FLASH_OBR_RAM_PARITY_CHECK, FLASH_OBR_nBOOT0_SW, FLASH_OBR_DATA0 and FLASH_OBR_DATA1.
    • Add bit definition for OB_WRP2_WRP2, OB_WRP2_nWRP2, OB_WRP3_WRP3 and OB_WRP3_nWRP3.
    • Update almost bits definition to be in line with RM0091 reference manual.
  • system_stm32f0xx.c
    • SystemInit(): update to support STM32F042 and STM32F072 devices
  • Add new startup files for the STM32F042 and STM32F072 devices for the supported compilers
    • Replace startup_stm32f0xx_ld.s and startup_stm32f0xx.s by respectively startup_stm32f030.s and startup_stm32f051.s  files.
    • startup_stm32f0xx_ld.s and startup_stm32f0xx.s  files are maintained for legacy purpose.
+

V1.2.1 / 22-November-2013

+ + +

Main +Changes

+ + + +
  • stm32f0xx.h
    • Update STM32F030 devices definition:
      +
      • Remove the STM32F030X8 and STM32FO30X6 defines and replace them with the STM32F030 define
    • Update IRQn enum for STM32F030 devices
  • system_stm32f0xx.c
    • SystemInit(): update to support STM32F030 devices
  • Remove the startup files startup_stm32f030x8.s and startup_stm32f030x6.s and replace them by startup_stm32f030.s, for EWARM, MDK-ARM and Truestudio supported compilers
+

V1.2.0 / 01-August-2013

+ + +

Main +Changes

+ + + +
  • Add support of STM32F030  devices (STM32F030x8 and STM32F030x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)
  • stm32f0xx.h
    • Update STM32F0xx devices definition:
      +
      • Add new definition STM32F030X8 and STM32FO30X6 for STM32F030 devices
    • Update IRQn enum for STM32F030 devices
  • system_stm32f0xx.c
    • SystemInit(): update to support STM32F030 devices
  • Add new startup files, startup_stm32f030x8.s and startup_stm32f030x6.s, for EWARM, MDK-ARM and Truestudio supported compilers
+ + +

V1.1.1 / 31-July-2013

+ + +

Main +Changes

+ + + +
    +
  • stm32f0xx.h
    • Extend HSE_STARTUP_TIMEOUT and HSI_STARTUP_TIMEOUT values to 0x5000
    +
+ +

V1.1.0 / 10-May-2013

+

Main +Changes

+ +
    +
  • Add support of STM32F0xx Low-density devices (STM32F050xx and STM32F060xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)
    • +
  • stm32f0xx.h
    • +
      +
    • Update STM32F0xx devices definition:
      +
      • +
        +
      • Define for STM32F0xx Medium-density devices changed from STM32F0XX to STM32F0XX_MD
        +
        • +
      • Add new definition STM32F0XX_LD for STM32F0xx Low-density devices
        • +
      +
    +
      +
    • Update IRQn enum for STM32F0XX_LD devices
      • +
    +
      +
    • Add new bits definition
      • +
        +
      • RCC_CFGR register: MCOPRE[0:2] and PLLNODIV
        • +
      • SYSCFG_CFGR1 register: FMP_I2C1, FMP_PA9 and FMP_PA10
        +
        • +
      +
    +
  • system_stm32f0xx.c
    • +
      +
    • SystemInit(): update to reset new bits added in RCC_CFGR register
      • +
    +
  • Add new startup files, startup_stm32f0xx_ld.s, for the supported compilers
    • +
+

V1.0.2 / 13-July-2012

Main +Changes

+
  • stm32f0xx.h
    • Fix issue with gcc_ride7 startup file

V1.0.1 / 20-April-2012

Main +Changes

+
  • stm32f0xx.h
    • Add reference to STM32F050xx (Flash memory up to 32 Kbytes) and STM32F051xx (Flash memory up to 64 Kbytes) devices
    • RTC register bits definition: remove reference to Tamper3

V1.0.0 / 23-March-2012

Main +Changes

+
  • First official release for STM32F0xx devices
  • All source files: license disclaimer text update and add link to the License file on ST Internet
  • stm32f0xx.h
    • change MCO bits value:
      • change RCC_CFGR_MCO_HSI14 value from 0x03000000 to 0x01000000
      • Add RCC_CFGR_MCO_LSI having value 0x02000000
      • Add RCC_CFGR_MCO_LSE having value 0x03000000
    • Add new bit RCC_CSR_V18PWRRSTF having value 0x00800000
    • TIM_OR bits definition values corrected
    • Rename ADC_ISR_EOS to ADC_ISR_EOSEQ
    • Rename ADC_IER_EOSIE to ADC_IER_EOSEQIE
    • Rename ADC_CFGR1_AUTDLY to ADC_CFGR1_WAIT
    • Rename option bit FLASH_OBR_BOOT1 to FLASH_OBR_nBOOT1
    • Rename FLASH_OBR_VDDA_ANALOG to FLASH_OBR_VDDA_MONITOR
    • Add Flash and OB keys (removed from Flash driver)
  • system_stm32f0xx.c
    • SetSysClock() function: code optimized 
    • Miscellaneous formatting
+

V1.0.0RC1 / 27-January-2012

+

Main +Changes

+ +
    +
  • Official version (V1.0.0) Release Candidate 1
    • +
  • All source +files: update disclaimer to add reference to the new license agreement
    • +
  • Update all peripherals bits definitions
    +
    • +
+ +
    +
+ +
+
+

For + complete documentation on STM32 + Microcontrollers visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/Libraries/CMSIS/Device/STM32F0xx/Source/arm/startup_stm32f072.s b/Libraries/CMSIS/Device/STM32F0xx/Source/arm/startup_stm32f072.s new file mode 100644 index 0000000..5835973 --- /dev/null +++ b/Libraries/CMSIS/Device/STM32F0xx/Source/arm/startup_stm32f072.s @@ -0,0 +1,285 @@ +;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f072.s +;* Author : MCD Application Team +;* Version : V1.5.1 +;* Date : 13-October-2021 +;* Description : STM32F072 Devices vector table for +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +;* +;* Copyright (c) 2016 STMicroelectronics. +;* All rights reserved. +;* +;* This software is licensed under terms that can be found in the LICENSE file +;* in the root directory of this software component. +;* If no LICENSE file comes with this software, it is provided AS-IS. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD TIM7_IRQHandler ; TIM7 + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_4_IRQHandler ; USART3 and USART4 + DCD CEC_CAN_IRQHandler ; CEC and CAN + DCD USB_IRQHandler ; USB + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_VDDIO2_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_CRS_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_4_IRQHandler [WEAK] + EXPORT CEC_CAN_IRQHandler [WEAK] + EXPORT USB_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_VDDIO2_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_CRS_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TSC_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_6_7_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_4_IRQHandler +CEC_CAN_IRQHandler +USB_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + diff --git a/Libraries/CMSIS/Device/STM32F0xx/Source/gcc_ride7/startup_stm32f072.s b/Libraries/CMSIS/Device/STM32F0xx/Source/gcc_ride7/startup_stm32f072.s new file mode 100644 index 0000000..6bef59d --- /dev/null +++ b/Libraries/CMSIS/Device/STM32F0xx/Source/gcc_ride7/startup_stm32f072.s @@ -0,0 +1,329 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.5.2 + * @date 13-October-2021 + * @brief STM32F072 Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_VDDIO2_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_CRS_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TSC_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_6_7_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word TIM7_IRQHandler + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_4_IRQHandler + .word CEC_CAN_IRQHandler + .word USB_IRQHandler + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_6_7_IRQHandler + .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_4_IRQHandler + .thumb_set USART3_4_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + + .weak USB_IRQHandler + .thumb_set USB_IRQHandler,Default_Handler + + diff --git a/Libraries/CMSIS/Include/cachel1_armv7.h b/Libraries/CMSIS/Include/cachel1_armv7.h new file mode 100644 index 0000000..abebc95 --- /dev/null +++ b/Libraries/CMSIS/Include/cachel1_armv7.h @@ -0,0 +1,411 @@ +/****************************************************************************** + * @file cachel1_armv7.h + * @brief CMSIS Level 1 Cache API for Armv7-M and later + * @version V1.0.1 + * @date 19. April 2021 + ******************************************************************************/ +/* + * Copyright (c) 2020-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_CACHEL1_ARMV7_H +#define ARM_CACHEL1_ARMV7_H + +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#ifndef __SCB_DCACHE_LINE_SIZE +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#endif + +#ifndef __SCB_ICACHE_LINE_SIZE +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#endif + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (volatile void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (volatile void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (volatile void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (volatile void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + +#endif /* ARM_CACHEL1_ARMV7_H */ diff --git a/Libraries/CMSIS/Include/cmsis_armcc.h b/Libraries/CMSIS/Include/cmsis_armcc.h new file mode 100644 index 0000000..a955d47 --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_armcc.h @@ -0,0 +1,888 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.3.2 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + /* __ARM_ARCH_8_1M_MAIN__ not applicable */ + +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; + __ISB(); +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/Libraries/CMSIS/Include/cmsis_armclang.h b/Libraries/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..6911417 --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1503 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.4.3 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL Image$$STACKSEAL$$ZI$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} +#endif + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} +#endif + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Libraries/CMSIS/Include/cmsis_armclang_ltm.h b/Libraries/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000..1e255d5 --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1928 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.5.3 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL Image$$STACKSEAL$$ZI$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} +#endif + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} +#endif + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Libraries/CMSIS/Include/cmsis_compiler.h b/Libraries/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..adbf296 --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/Libraries/CMSIS/Include/cmsis_gcc.h b/Libraries/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..67bda4e --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2211 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.4.1 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section(".vectors"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL __StackSeal +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi":::"memory") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe":::"memory") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1, ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1, ARG2) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1, ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + +#define __USAT16(ARG1, ARG2) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16_RORn(uint32_t op1, uint32_t rotate) +{ + uint32_t result; + if (__builtin_constant_p(rotate) && ((rotate == 8U) || (rotate == 16U) || (rotate == 24U))) { + __ASM volatile ("sxtb16 %0, %1, ROR %2" : "=r" (result) : "r" (op1), "i" (rotate) ); + } else { + result = __SXTB16(__ROR(op1, rotate)) ; + } + return result; +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16_RORn(uint32_t op1, uint32_t op2, uint32_t rotate) +{ + uint32_t result; + if (__builtin_constant_p(rotate) && ((rotate == 8U) || (rotate == 16U) || (rotate == 24U))) { + __ASM volatile ("sxtab16 %0, %1, %2, ROR %3" : "=r" (result) : "r" (op1) , "r" (op2) , "i" (rotate)); + } else { + result = __SXTAB16(op1, __ROR(op2, rotate)); + } + return result; +} + + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +#define __PKHBT(ARG1,ARG2,ARG3) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Libraries/CMSIS/Include/cmsis_iccarm.h b/Libraries/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..65b824b --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,1002 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.3.0 + * @date 14. April 2021 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2021 IAR Systems +// Copyright (c) 2017-2021 Arm Limited. All rights reserved. +// +// SPDX-License-Identifier: Apache-2.0 +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#undef __WEAK /* undo the definition from DLib_Defaults.h */ +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL STACKSEAL$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __arm_wsr("CONTROL", control); + __iar_builtin_ISB(); +} + + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __arm_wsr("CONTROL_NS", control); + __iar_builtin_ISB(); +} + + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM volatile("RRX %0, %1" : "=r"(result) : "r" (value)); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + __iar_builtin_ISB(); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM volatile ("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM volatile ("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM volatile ("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM volatile ("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM volatile ("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM volatile ("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Libraries/CMSIS/Include/cmsis_version.h b/Libraries/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..8b4765f --- /dev/null +++ b/Libraries/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.5 + * @date 02. February 2022 + ******************************************************************************/ +/* + * Copyright (c) 2009-2022 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 6U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/Libraries/CMSIS/Include/core_armv81mml.h b/Libraries/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..94128a1 --- /dev/null +++ b/Libraries/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,4228 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.4.2 + * @date 13. October 2021 + ******************************************************************************/ +/* + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 2U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 31 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[3]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE4 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE8 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFEC (R/W) PMU Peripheral Identification Register 3 */ + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (0xFFFFUL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (0xFFFFUL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (0xFFUL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (0x3FUL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/** \brief PMU Authentication Status Register Definitions */ + +#define PMU_AUTHSTATUS_NSID_Pos 0U /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSID_Msk (0x3UL /*<< PMU_AUTHSTATUS_NSID_Pos*/) /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSNID_Pos 2U /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSNID_Msk (0x3UL << PMU_AUTHSTATUS_NSNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SID_Pos 4U /*!< PMU AUTHSTATUS: Secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_SID_Msk (0x3UL << PMU_AUTHSTATUS_SID_Pos) /*!< PMU AUTHSTATUS: Secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SNID_Pos 6U /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SNID_Msk (0x3UL << PMU_AUTHSTATUS_SNID_Pos) /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUID_Pos 16U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUID_Msk (0x3UL << PMU_AUTHSTATUS_NSUID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUNID_Pos 18U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUNID_Msk (0x3UL << PMU_AUTHSTATUS_NSUNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUID_Pos 20U /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_SUID_Msk (0x3UL << PMU_AUTHSTATUS_SUID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUNID_Pos 22U /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SUNID_Msk (0x3UL << PMU_AUTHSTATUS_SUNID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Mask */ + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_armv8mbl.h b/Libraries/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..932d3d1 --- /dev/null +++ b/Libraries/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,2222 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< \deprecated CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_armv8mml.h b/Libraries/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..c119fbf --- /dev/null +++ b/Libraries/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,3209 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.2.3 + * @date 13. October 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (80U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm0.h b/Libraries/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..6441ff3 --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 21. August 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + *(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */ + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */ +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm0plus.h b/Libraries/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..4e7179a --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1087 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.9 + * @date 21. August 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +#else + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + *(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */ +#endif + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +#else + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */ +#endif +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm1.h b/Libraries/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..76b4569 --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm23.h b/Libraries/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..55fff99 --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm23.h @@ -0,0 +1,2297 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 11. February 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< \deprecated CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm3.h b/Libraries/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..74fb87e --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm3.h @@ -0,0 +1,1943 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.2 + * @date 04. June 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm33.h b/Libraries/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..18a2e6f --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm33.h @@ -0,0 +1,3277 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.2.3 + * @date 13. October 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm35p.h b/Libraries/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..3843d95 --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm35p.h @@ -0,0 +1,3277 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.1.3 + * @date 13. October 2021 + ******************************************************************************/ +/* + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm4.h b/Libraries/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..e21cd14 --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm4.h @@ -0,0 +1,2129 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.2 + * @date 04. June 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm55.h b/Libraries/CMSIS/Include/core_cm55.h new file mode 100644 index 0000000..faa30ce --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm55.h @@ -0,0 +1,4817 @@ +/**************************************************************************//** + * @file core_cm55.h + * @brief CMSIS Cortex-M55 Core Peripheral Access Layer Header File + * @version V1.2.4 + * @date 21. April 2022 + ******************************************************************************/ +/* + * Copyright (c) 2018-2022 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM55_H_GENERIC +#define __CORE_CM55_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M55 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM55 definitions */ +#define __CM55_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM55_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM55_CMSIS_VERSION ((__CM55_CMSIS_VERSION_MAIN << 16U) | \ + __CM55_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (55U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM55_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM55_H_DEPENDANT +#define __CORE_CM55_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM55_REV + #define __CM55_REV 0x0000U + #warning "__CM55_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 8U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 8 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M55 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core EWIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core PMU Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ICB Implementation Control Block register (ICB) + \brief Type definitions for the Implementation Control Block Register + @{ + */ + +/** + \brief Structure type to access the Implementation Control Block (ICB). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} ICB_Type; + +/* Auxiliary Control Register Definitions */ +#define ICB_ACTLR_DISCRITAXIRUW_Pos 27U /*!< ACTLR: DISCRITAXIRUW Position */ +#define ICB_ACTLR_DISCRITAXIRUW_Msk (1UL << ICB_ACTLR_DISCRITAXIRUW_Pos) /*!< ACTLR: DISCRITAXIRUW Mask */ + +#define ICB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define ICB_ACTLR_DISDI_Msk (3UL << ICB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define ICB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define ICB_ACTLR_DISCRITAXIRUR_Msk (1UL << ICB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define ICB_ACTLR_EVENTBUSEN_Pos 14U /*!< ACTLR: EVENTBUSEN Position */ +#define ICB_ACTLR_EVENTBUSEN_Msk (1UL << ICB_ACTLR_EVENTBUSEN_Pos) /*!< ACTLR: EVENTBUSEN Mask */ + +#define ICB_ACTLR_EVENTBUSEN_S_Pos 13U /*!< ACTLR: EVENTBUSEN_S Position */ +#define ICB_ACTLR_EVENTBUSEN_S_Msk (1UL << ICB_ACTLR_EVENTBUSEN_S_Pos) /*!< ACTLR: EVENTBUSEN_S Mask */ + +#define ICB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define ICB_ACTLR_DISITMATBFLUSH_Msk (1UL << ICB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define ICB_ACTLR_DISNWAMODE_Pos 11U /*!< ACTLR: DISNWAMODE Position */ +#define ICB_ACTLR_DISNWAMODE_Msk (1UL << ICB_ACTLR_DISNWAMODE_Pos) /*!< ACTLR: DISNWAMODE Mask */ + +#define ICB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define ICB_ACTLR_FPEXCODIS_Msk (1UL << ICB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define ICB_ACTLR_DISOLAP_Pos 7U /*!< ACTLR: DISOLAP Position */ +#define ICB_ACTLR_DISOLAP_Msk (1UL << ICB_ACTLR_DISOLAP_Pos) /*!< ACTLR: DISOLAP Mask */ + +#define ICB_ACTLR_DISOLAPS_Pos 6U /*!< ACTLR: DISOLAPS Position */ +#define ICB_ACTLR_DISOLAPS_Msk (1UL << ICB_ACTLR_DISOLAPS_Pos) /*!< ACTLR: DISOLAPS Mask */ + +#define ICB_ACTLR_DISLOBR_Pos 5U /*!< ACTLR: DISLOBR Position */ +#define ICB_ACTLR_DISLOBR_Msk (1UL << ICB_ACTLR_DISLOBR_Pos) /*!< ACTLR: DISLOBR Mask */ + +#define ICB_ACTLR_DISLO_Pos 4U /*!< ACTLR: DISLO Position */ +#define ICB_ACTLR_DISLO_Msk (1UL << ICB_ACTLR_DISLO_Pos) /*!< ACTLR: DISLO Mask */ + +#define ICB_ACTLR_DISLOLEP_Pos 3U /*!< ACTLR: DISLOLEP Position */ +#define ICB_ACTLR_DISLOLEP_Msk (1UL << ICB_ACTLR_DISLOLEP_Pos) /*!< ACTLR: DISLOLEP Mask */ + +#define ICB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define ICB_ACTLR_DISFOLD_Msk (1UL << ICB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +/* Interrupt Controller Type Register Definitions */ +#define ICB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define ICB_ICTR_INTLINESNUM_Msk (0xFUL /*<< ICB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_ICB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup MemSysCtl_Type Memory System Control Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Memory System Control Registers (MEMSYSCTL) + @{ + */ + +/** + \brief Structure type to access the Memory System Control Registers (MEMSYSCTL). + */ +typedef struct +{ + __IOM uint32_t MSCR; /*!< Offset: 0x000 (R/W) Memory System Control Register */ + __IOM uint32_t PFCR; /*!< Offset: 0x004 (R/W) Prefetcher Control Register */ + uint32_t RESERVED1[2U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x010 (R/W) ITCM Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x014 (R/W) DTCM Control Register */ + __IOM uint32_t PAHBCR; /*!< Offset: 0x018 (R/W) P-AHB Control Register */ + uint32_t RESERVED2[313U]; + __IOM uint32_t ITGU_CTRL; /*!< Offset: 0x500 (R/W) ITGU Control Register */ + __IOM uint32_t ITGU_CFG; /*!< Offset: 0x504 (R/W) ITGU Configuration Register */ + uint32_t RESERVED3[2U]; + __IOM uint32_t ITGU_LUT[16U]; /*!< Offset: 0x510 (R/W) ITGU Look Up Table Register */ + uint32_t RESERVED4[44U]; + __IOM uint32_t DTGU_CTRL; /*!< Offset: 0x600 (R/W) DTGU Control Registers */ + __IOM uint32_t DTGU_CFG; /*!< Offset: 0x604 (R/W) DTGU Configuration Register */ + uint32_t RESERVED5[2U]; + __IOM uint32_t DTGU_LUT[16U]; /*!< Offset: 0x610 (R/W) DTGU Look Up Table Register */ +} MemSysCtl_Type; + +/* MEMSYSCTL Memory System Control Register (MSCR) Register Definitions */ +#define MEMSYSCTL_MSCR_CPWRDN_Pos 17U /*!< MEMSYSCTL MSCR: CPWRDN Position */ +#define MEMSYSCTL_MSCR_CPWRDN_Msk (0x1UL << MEMSYSCTL_MSCR_CPWRDN_Pos) /*!< MEMSYSCTL MSCR: CPWRDN Mask */ + +#define MEMSYSCTL_MSCR_DCCLEAN_Pos 16U /*!< MEMSYSCTL MSCR: DCCLEAN Position */ +#define MEMSYSCTL_MSCR_DCCLEAN_Msk (0x1UL << MEMSYSCTL_MSCR_DCCLEAN_Pos) /*!< MEMSYSCTL MSCR: DCCLEAN Mask */ + +#define MEMSYSCTL_MSCR_ICACTIVE_Pos 13U /*!< MEMSYSCTL MSCR: ICACTIVE Position */ +#define MEMSYSCTL_MSCR_ICACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_ICACTIVE_Pos) /*!< MEMSYSCTL MSCR: ICACTIVE Mask */ + +#define MEMSYSCTL_MSCR_DCACTIVE_Pos 12U /*!< MEMSYSCTL MSCR: DCACTIVE Position */ +#define MEMSYSCTL_MSCR_DCACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_DCACTIVE_Pos) /*!< MEMSYSCTL MSCR: DCACTIVE Mask */ + +#define MEMSYSCTL_MSCR_TECCCHKDIS_Pos 4U /*!< MEMSYSCTL MSCR: TECCCHKDIS Position */ +#define MEMSYSCTL_MSCR_TECCCHKDIS_Msk (0x1UL << MEMSYSCTL_MSCR_TECCCHKDIS_Pos) /*!< MEMSYSCTL MSCR: TECCCHKDIS Mask */ + +#define MEMSYSCTL_MSCR_EVECCFAULT_Pos 3U /*!< MEMSYSCTL MSCR: EVECCFAULT Position */ +#define MEMSYSCTL_MSCR_EVECCFAULT_Msk (0x1UL << MEMSYSCTL_MSCR_EVECCFAULT_Pos) /*!< MEMSYSCTL MSCR: EVECCFAULT Mask */ + +#define MEMSYSCTL_MSCR_FORCEWT_Pos 2U /*!< MEMSYSCTL MSCR: FORCEWT Position */ +#define MEMSYSCTL_MSCR_FORCEWT_Msk (0x1UL << MEMSYSCTL_MSCR_FORCEWT_Pos) /*!< MEMSYSCTL MSCR: FORCEWT Mask */ + +#define MEMSYSCTL_MSCR_ECCEN_Pos 1U /*!< MEMSYSCTL MSCR: ECCEN Position */ +#define MEMSYSCTL_MSCR_ECCEN_Msk (0x1UL << MEMSYSCTL_MSCR_ECCEN_Pos) /*!< MEMSYSCTL MSCR: ECCEN Mask */ + +/* MEMSYSCTL Prefetcher Control Register (PFCR) Register Definitions */ +#define MEMSYSCTL_PFCR_MAX_OS_Pos 7U /*!< MEMSYSCTL PFCR: MAX_OS Position */ +#define MEMSYSCTL_PFCR_MAX_OS_Msk (0x7UL << MEMSYSCTL_PFCR_MAX_OS_Pos) /*!< MEMSYSCTL PFCR: MAX_OS Mask */ + +#define MEMSYSCTL_PFCR_MAX_LA_Pos 4U /*!< MEMSYSCTL PFCR: MAX_LA Position */ +#define MEMSYSCTL_PFCR_MAX_LA_Msk (0x7UL << MEMSYSCTL_PFCR_MAX_LA_Pos) /*!< MEMSYSCTL PFCR: MAX_LA Mask */ + +#define MEMSYSCTL_PFCR_MIN_LA_Pos 1U /*!< MEMSYSCTL PFCR: MIN_LA Position */ +#define MEMSYSCTL_PFCR_MIN_LA_Msk (0x7UL << MEMSYSCTL_PFCR_MIN_LA_Pos) /*!< MEMSYSCTL PFCR: MIN_LA Mask */ + +#define MEMSYSCTL_PFCR_ENABLE_Pos 0U /*!< MEMSYSCTL PFCR: ENABLE Position */ +#define MEMSYSCTL_PFCR_ENABLE_Msk (0x1UL /*<< MEMSYSCTL_PFCR_ENABLE_Pos*/) /*!< MEMSYSCTL PFCR: ENABLE Mask */ + +/* MEMSYSCTL ITCM Control Register (ITCMCR) Register Definitions */ +#define MEMSYSCTL_ITCMCR_SZ_Pos 3U /*!< MEMSYSCTL ITCMCR: SZ Position */ +#define MEMSYSCTL_ITCMCR_SZ_Msk (0xFUL << MEMSYSCTL_ITCMCR_SZ_Pos) /*!< MEMSYSCTL ITCMCR: SZ Mask */ + +#define MEMSYSCTL_ITCMCR_EN_Pos 0U /*!< MEMSYSCTL ITCMCR: EN Position */ +#define MEMSYSCTL_ITCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_ITCMCR_EN_Pos*/) /*!< MEMSYSCTL ITCMCR: EN Mask */ + +/* MEMSYSCTL DTCM Control Register (DTCMCR) Register Definitions */ +#define MEMSYSCTL_DTCMCR_SZ_Pos 3U /*!< MEMSYSCTL DTCMCR: SZ Position */ +#define MEMSYSCTL_DTCMCR_SZ_Msk (0xFUL << MEMSYSCTL_DTCMCR_SZ_Pos) /*!< MEMSYSCTL DTCMCR: SZ Mask */ + +#define MEMSYSCTL_DTCMCR_EN_Pos 0U /*!< MEMSYSCTL DTCMCR: EN Position */ +#define MEMSYSCTL_DTCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_DTCMCR_EN_Pos*/) /*!< MEMSYSCTL DTCMCR: EN Mask */ + +/* MEMSYSCTL P-AHB Control Register (PAHBCR) Register Definitions */ +#define MEMSYSCTL_PAHBCR_SZ_Pos 1U /*!< MEMSYSCTL PAHBCR: SZ Position */ +#define MEMSYSCTL_PAHBCR_SZ_Msk (0x7UL << MEMSYSCTL_PAHBCR_SZ_Pos) /*!< MEMSYSCTL PAHBCR: SZ Mask */ + +#define MEMSYSCTL_PAHBCR_EN_Pos 0U /*!< MEMSYSCTL PAHBCR: EN Position */ +#define MEMSYSCTL_PAHBCR_EN_Msk (0x1UL /*<< MEMSYSCTL_PAHBCR_EN_Pos*/) /*!< MEMSYSCTL PAHBCR: EN Mask */ + +/* MEMSYSCTL ITGU Control Register (ITGU_CTRL) Register Definitions */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL ITGU_CTRL: DEREN Position */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_ITGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL ITGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL ITGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_ITGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL ITGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL ITGU Configuration Register (ITGU_CFG) Register Definitions */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL ITGU_CFG: PRESENT Position */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_ITGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL ITGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL ITGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_ITGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL ITGU_CFG: BLKSZ Mask */ + +/* MEMSYSCTL DTGU Control Registers (DTGU_CTRL) Register Definitions */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL DTGU_CTRL: DEREN Position */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_DTGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL DTGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL DTGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_DTGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL DTGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL DTGU Configuration Register (DTGU_CFG) Register Definitions */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL DTGU_CFG: PRESENT Position */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_DTGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL DTGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL DTGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_DTGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL DTGU_CFG: BLKSZ Mask */ + + +/*@}*/ /* end of group MemSysCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PwrModCtl_Type Power Mode Control Registers + \brief Type definitions for the Power Mode Control Registers (PWRMODCTL) + @{ + */ + +/** + \brief Structure type to access the Power Mode Control Registers (PWRMODCTL). + */ +typedef struct +{ + __IOM uint32_t CPDLPSTATE; /*!< Offset: 0x000 (R/W) Core Power Domain Low Power State Register */ + __IOM uint32_t DPDLPSTATE; /*!< Offset: 0x004 (R/W) Debug Power Domain Low Power State Register */ +} PwrModCtl_Type; + +/* PWRMODCTL Core Power Domain Low Power State (CPDLPSTATE) Register Definitions */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos 8U /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos 4U /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos 0U /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Msk (0x3UL /*<< PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos*/) /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Mask */ + +/* PWRMODCTL Debug Power Domain Low Power State (DPDLPSTATE) Register Definitions */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos 0U /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Position */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Msk (0x3UL /*<< PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos*/) /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Mask */ + +/*@}*/ /* end of group PwrModCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup EWIC_Type External Wakeup Interrupt Controller Registers + \brief Type definitions for the External Wakeup Interrupt Controller Registers (EWIC) + @{ + */ + +/** + \brief Structure type to access the External Wakeup Interrupt Controller Registers (EWIC). + */ +typedef struct +{ + __OM uint32_t EVENTSPR; /*!< Offset: 0x000 ( /W) Event Set Pending Register */ + uint32_t RESERVED0[31U]; + __IM uint32_t EVENTMASKA; /*!< Offset: 0x080 (R/W) Event Mask A Register */ + __IM uint32_t EVENTMASK[15]; /*!< Offset: 0x084 (R/W) Event Mask Register */ +} EWIC_Type; + +/* EWIC External Wakeup Interrupt Controller (EVENTSPR) Register Definitions */ +#define EWIC_EVENTSPR_EDBGREQ_Pos 2U /*!< EWIC EVENTSPR: EDBGREQ Position */ +#define EWIC_EVENTSPR_EDBGREQ_Msk (0x1UL << EWIC_EVENTSPR_EDBGREQ_Pos) /*!< EWIC EVENTSPR: EDBGREQ Mask */ + +#define EWIC_EVENTSPR_NMI_Pos 1U /*!< EWIC EVENTSPR: NMI Position */ +#define EWIC_EVENTSPR_NMI_Msk (0x1UL << EWIC_EVENTSPR_NMI_Pos) /*!< EWIC EVENTSPR: NMI Mask */ + +#define EWIC_EVENTSPR_EVENT_Pos 0U /*!< EWIC EVENTSPR: EVENT Position */ +#define EWIC_EVENTSPR_EVENT_Msk (0x1UL /*<< EWIC_EVENTSPR_EVENT_Pos*/) /*!< EWIC EVENTSPR: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASKA) Register Definitions */ +#define EWIC_EVENTMASKA_EDBGREQ_Pos 2U /*!< EWIC EVENTMASKA: EDBGREQ Position */ +#define EWIC_EVENTMASKA_EDBGREQ_Msk (0x1UL << EWIC_EVENTMASKA_EDBGREQ_Pos) /*!< EWIC EVENTMASKA: EDBGREQ Mask */ + +#define EWIC_EVENTMASKA_NMI_Pos 1U /*!< EWIC EVENTMASKA: NMI Position */ +#define EWIC_EVENTMASKA_NMI_Msk (0x1UL << EWIC_EVENTMASKA_NMI_Pos) /*!< EWIC EVENTMASKA: NMI Mask */ + +#define EWIC_EVENTMASKA_EVENT_Pos 0U /*!< EWIC EVENTMASKA: EVENT Position */ +#define EWIC_EVENTMASKA_EVENT_Msk (0x1UL /*<< EWIC_EVENTMASKA_EVENT_Pos*/) /*!< EWIC EVENTMASKA: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASK) Register Definitions */ +#define EWIC_EVENTMASK_IRQ_Pos 0U /*!< EWIC EVENTMASKA: IRQ Position */ +#define EWIC_EVENTMASK_IRQ_Msk (0xFFFFFFFFUL /*<< EWIC_EVENTMASKA_IRQ_Pos*/) /*!< EWIC EVENTMASKA: IRQ Mask */ + +/*@}*/ /* end of group EWIC_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup ErrBnk_Type Error Banking Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Error Banking Registers (ERRBNK) + @{ + */ + +/** + \brief Structure type to access the Error Banking Registers (ERRBNK). + */ +typedef struct +{ + __IOM uint32_t IEBR0; /*!< Offset: 0x000 (R/W) Instruction Cache Error Bank Register 0 */ + __IOM uint32_t IEBR1; /*!< Offset: 0x004 (R/W) Instruction Cache Error Bank Register 1 */ + uint32_t RESERVED0[2U]; + __IOM uint32_t DEBR0; /*!< Offset: 0x010 (R/W) Data Cache Error Bank Register 0 */ + __IOM uint32_t DEBR1; /*!< Offset: 0x014 (R/W) Data Cache Error Bank Register 1 */ + uint32_t RESERVED1[2U]; + __IOM uint32_t TEBR0; /*!< Offset: 0x020 (R/W) TCM Error Bank Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t TEBR1; /*!< Offset: 0x028 (R/W) TCM Error Bank Register 1 */ +} ErrBnk_Type; + +/* ERRBNK Instruction Cache Error Bank Register 0 (IEBR0) Register Definitions */ +#define ERRBNK_IEBR0_SWDEF_Pos 30U /*!< ERRBNK IEBR0: SWDEF Position */ +#define ERRBNK_IEBR0_SWDEF_Msk (0x3UL << ERRBNK_IEBR0_SWDEF_Pos) /*!< ERRBNK IEBR0: SWDEF Mask */ + +#define ERRBNK_IEBR0_BANK_Pos 16U /*!< ERRBNK IEBR0: BANK Position */ +#define ERRBNK_IEBR0_BANK_Msk (0x1UL << ERRBNK_IEBR0_BANK_Pos) /*!< ERRBNK IEBR0: BANK Mask */ + +#define ERRBNK_IEBR0_LOCATION_Pos 2U /*!< ERRBNK IEBR0: LOCATION Position */ +#define ERRBNK_IEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR0_LOCATION_Pos) /*!< ERRBNK IEBR0: LOCATION Mask */ + +#define ERRBNK_IEBR0_LOCKED_Pos 1U /*!< ERRBNK IEBR0: LOCKED Position */ +#define ERRBNK_IEBR0_LOCKED_Msk (0x1UL << ERRBNK_IEBR0_LOCKED_Pos) /*!< ERRBNK IEBR0: LOCKED Mask */ + +#define ERRBNK_IEBR0_VALID_Pos 0U /*!< ERRBNK IEBR0: VALID Position */ +#define ERRBNK_IEBR0_VALID_Msk (0x1UL << /*ERRBNK_IEBR0_VALID_Pos*/) /*!< ERRBNK IEBR0: VALID Mask */ + +/* ERRBNK Instruction Cache Error Bank Register 1 (IEBR1) Register Definitions */ +#define ERRBNK_IEBR1_SWDEF_Pos 30U /*!< ERRBNK IEBR1: SWDEF Position */ +#define ERRBNK_IEBR1_SWDEF_Msk (0x3UL << ERRBNK_IEBR1_SWDEF_Pos) /*!< ERRBNK IEBR1: SWDEF Mask */ + +#define ERRBNK_IEBR1_BANK_Pos 16U /*!< ERRBNK IEBR1: BANK Position */ +#define ERRBNK_IEBR1_BANK_Msk (0x1UL << ERRBNK_IEBR1_BANK_Pos) /*!< ERRBNK IEBR1: BANK Mask */ + +#define ERRBNK_IEBR1_LOCATION_Pos 2U /*!< ERRBNK IEBR1: LOCATION Position */ +#define ERRBNK_IEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR1_LOCATION_Pos) /*!< ERRBNK IEBR1: LOCATION Mask */ + +#define ERRBNK_IEBR1_LOCKED_Pos 1U /*!< ERRBNK IEBR1: LOCKED Position */ +#define ERRBNK_IEBR1_LOCKED_Msk (0x1UL << ERRBNK_IEBR1_LOCKED_Pos) /*!< ERRBNK IEBR1: LOCKED Mask */ + +#define ERRBNK_IEBR1_VALID_Pos 0U /*!< ERRBNK IEBR1: VALID Position */ +#define ERRBNK_IEBR1_VALID_Msk (0x1UL << /*ERRBNK_IEBR1_VALID_Pos*/) /*!< ERRBNK IEBR1: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 0 (DEBR0) Register Definitions */ +#define ERRBNK_DEBR0_SWDEF_Pos 30U /*!< ERRBNK DEBR0: SWDEF Position */ +#define ERRBNK_DEBR0_SWDEF_Msk (0x3UL << ERRBNK_DEBR0_SWDEF_Pos) /*!< ERRBNK DEBR0: SWDEF Mask */ + +#define ERRBNK_DEBR0_TYPE_Pos 17U /*!< ERRBNK DEBR0: TYPE Position */ +#define ERRBNK_DEBR0_TYPE_Msk (0x1UL << ERRBNK_DEBR0_TYPE_Pos) /*!< ERRBNK DEBR0: TYPE Mask */ + +#define ERRBNK_DEBR0_BANK_Pos 16U /*!< ERRBNK DEBR0: BANK Position */ +#define ERRBNK_DEBR0_BANK_Msk (0x1UL << ERRBNK_DEBR0_BANK_Pos) /*!< ERRBNK DEBR0: BANK Mask */ + +#define ERRBNK_DEBR0_LOCATION_Pos 2U /*!< ERRBNK DEBR0: LOCATION Position */ +#define ERRBNK_DEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR0_LOCATION_Pos) /*!< ERRBNK DEBR0: LOCATION Mask */ + +#define ERRBNK_DEBR0_LOCKED_Pos 1U /*!< ERRBNK DEBR0: LOCKED Position */ +#define ERRBNK_DEBR0_LOCKED_Msk (0x1UL << ERRBNK_DEBR0_LOCKED_Pos) /*!< ERRBNK DEBR0: LOCKED Mask */ + +#define ERRBNK_DEBR0_VALID_Pos 0U /*!< ERRBNK DEBR0: VALID Position */ +#define ERRBNK_DEBR0_VALID_Msk (0x1UL << /*ERRBNK_DEBR0_VALID_Pos*/) /*!< ERRBNK DEBR0: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 1 (DEBR1) Register Definitions */ +#define ERRBNK_DEBR1_SWDEF_Pos 30U /*!< ERRBNK DEBR1: SWDEF Position */ +#define ERRBNK_DEBR1_SWDEF_Msk (0x3UL << ERRBNK_DEBR1_SWDEF_Pos) /*!< ERRBNK DEBR1: SWDEF Mask */ + +#define ERRBNK_DEBR1_TYPE_Pos 17U /*!< ERRBNK DEBR1: TYPE Position */ +#define ERRBNK_DEBR1_TYPE_Msk (0x1UL << ERRBNK_DEBR1_TYPE_Pos) /*!< ERRBNK DEBR1: TYPE Mask */ + +#define ERRBNK_DEBR1_BANK_Pos 16U /*!< ERRBNK DEBR1: BANK Position */ +#define ERRBNK_DEBR1_BANK_Msk (0x1UL << ERRBNK_DEBR1_BANK_Pos) /*!< ERRBNK DEBR1: BANK Mask */ + +#define ERRBNK_DEBR1_LOCATION_Pos 2U /*!< ERRBNK DEBR1: LOCATION Position */ +#define ERRBNK_DEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR1_LOCATION_Pos) /*!< ERRBNK DEBR1: LOCATION Mask */ + +#define ERRBNK_DEBR1_LOCKED_Pos 1U /*!< ERRBNK DEBR1: LOCKED Position */ +#define ERRBNK_DEBR1_LOCKED_Msk (0x1UL << ERRBNK_DEBR1_LOCKED_Pos) /*!< ERRBNK DEBR1: LOCKED Mask */ + +#define ERRBNK_DEBR1_VALID_Pos 0U /*!< ERRBNK DEBR1: VALID Position */ +#define ERRBNK_DEBR1_VALID_Msk (0x1UL << /*ERRBNK_DEBR1_VALID_Pos*/) /*!< ERRBNK DEBR1: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 0 (TEBR0) Register Definitions */ +#define ERRBNK_TEBR0_SWDEF_Pos 30U /*!< ERRBNK TEBR0: SWDEF Position */ +#define ERRBNK_TEBR0_SWDEF_Msk (0x3UL << ERRBNK_TEBR0_SWDEF_Pos) /*!< ERRBNK TEBR0: SWDEF Mask */ + +#define ERRBNK_TEBR0_POISON_Pos 28U /*!< ERRBNK TEBR0: POISON Position */ +#define ERRBNK_TEBR0_POISON_Msk (0x1UL << ERRBNK_TEBR0_POISON_Pos) /*!< ERRBNK TEBR0: POISON Mask */ + +#define ERRBNK_TEBR0_TYPE_Pos 27U /*!< ERRBNK TEBR0: TYPE Position */ +#define ERRBNK_TEBR0_TYPE_Msk (0x1UL << ERRBNK_TEBR0_TYPE_Pos) /*!< ERRBNK TEBR0: TYPE Mask */ + +#define ERRBNK_TEBR0_BANK_Pos 24U /*!< ERRBNK TEBR0: BANK Position */ +#define ERRBNK_TEBR0_BANK_Msk (0x3UL << ERRBNK_TEBR0_BANK_Pos) /*!< ERRBNK TEBR0: BANK Mask */ + +#define ERRBNK_TEBR0_LOCATION_Pos 2U /*!< ERRBNK TEBR0: LOCATION Position */ +#define ERRBNK_TEBR0_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR0_LOCATION_Pos) /*!< ERRBNK TEBR0: LOCATION Mask */ + +#define ERRBNK_TEBR0_LOCKED_Pos 1U /*!< ERRBNK TEBR0: LOCKED Position */ +#define ERRBNK_TEBR0_LOCKED_Msk (0x1UL << ERRBNK_TEBR0_LOCKED_Pos) /*!< ERRBNK TEBR0: LOCKED Mask */ + +#define ERRBNK_TEBR0_VALID_Pos 0U /*!< ERRBNK TEBR0: VALID Position */ +#define ERRBNK_TEBR0_VALID_Msk (0x1UL << /*ERRBNK_TEBR0_VALID_Pos*/) /*!< ERRBNK TEBR0: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 1 (TEBR1) Register Definitions */ +#define ERRBNK_TEBR1_SWDEF_Pos 30U /*!< ERRBNK TEBR1: SWDEF Position */ +#define ERRBNK_TEBR1_SWDEF_Msk (0x3UL << ERRBNK_TEBR1_SWDEF_Pos) /*!< ERRBNK TEBR1: SWDEF Mask */ + +#define ERRBNK_TEBR1_POISON_Pos 28U /*!< ERRBNK TEBR1: POISON Position */ +#define ERRBNK_TEBR1_POISON_Msk (0x1UL << ERRBNK_TEBR1_POISON_Pos) /*!< ERRBNK TEBR1: POISON Mask */ + +#define ERRBNK_TEBR1_TYPE_Pos 27U /*!< ERRBNK TEBR1: TYPE Position */ +#define ERRBNK_TEBR1_TYPE_Msk (0x1UL << ERRBNK_TEBR1_TYPE_Pos) /*!< ERRBNK TEBR1: TYPE Mask */ + +#define ERRBNK_TEBR1_BANK_Pos 24U /*!< ERRBNK TEBR1: BANK Position */ +#define ERRBNK_TEBR1_BANK_Msk (0x3UL << ERRBNK_TEBR1_BANK_Pos) /*!< ERRBNK TEBR1: BANK Mask */ + +#define ERRBNK_TEBR1_LOCATION_Pos 2U /*!< ERRBNK TEBR1: LOCATION Position */ +#define ERRBNK_TEBR1_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR1_LOCATION_Pos) /*!< ERRBNK TEBR1: LOCATION Mask */ + +#define ERRBNK_TEBR1_LOCKED_Pos 1U /*!< ERRBNK TEBR1: LOCKED Position */ +#define ERRBNK_TEBR1_LOCKED_Msk (0x1UL << ERRBNK_TEBR1_LOCKED_Pos) /*!< ERRBNK TEBR1: LOCKED Mask */ + +#define ERRBNK_TEBR1_VALID_Pos 0U /*!< ERRBNK TEBR1: VALID Position */ +#define ERRBNK_TEBR1_VALID_Msk (0x1UL << /*ERRBNK_TEBR1_VALID_Pos*/) /*!< ERRBNK TEBR1: VALID Mask */ + +/*@}*/ /* end of group ErrBnk_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PrcCfgInf_Type Processor Configuration Information Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Processor Configuration Information Registerss (PRCCFGINF) + @{ + */ + +/** + \brief Structure type to access the Processor Configuration Information Registerss (PRCCFGINF). + */ +typedef struct +{ + __OM uint32_t CFGINFOSEL; /*!< Offset: 0x000 ( /W) Processor Configuration Information Selection Register */ + __IM uint32_t CFGINFORD; /*!< Offset: 0x004 (R/ ) Processor Configuration Information Read Data Register */ +} PrcCfgInf_Type; + +/* PRCCFGINF Processor Configuration Information Selection Register (CFGINFOSEL) Definitions */ + +/* PRCCFGINF Processor Configuration Information Read Data Register (CFGINFORD) Definitions */ + +/*@}*/ /* end of group PrcCfgInf_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup STL_Type Software Test Library Observation Registers + \brief Type definitions for the Software Test Library Observation Registerss (STL) + @{ + */ + +/** + \brief Structure type to access the Software Test Library Observation Registerss (STL). + */ +typedef struct +{ + __IM uint32_t STLNVICPENDOR; /*!< Offset: 0x000 (R/ ) NVIC Pending Priority Tree Register */ + __IM uint32_t STLNVICACTVOR; /*!< Offset: 0x004 (R/ ) NVIC Active Priority Tree Register */ + uint32_t RESERVED0[2U]; + __OM uint32_t STLIDMPUSR; /*!< Offset: 0x010 ( /W) MPU Sanple Register */ + __IM uint32_t STLIMPUOR; /*!< Offset: 0x014 (R/ ) MPU Region Hit Register */ + __IM uint32_t STLD0MPUOR; /*!< Offset: 0x018 (R/ ) MPU Memory Attributes Register 0 */ + __IM uint32_t STLD1MPUOR; /*!< Offset: 0x01C (R/ ) MPU Memory Attributes Register 1 */ + +} STL_Type; + +/* STL Software Test Library Observation Register (STLNVICPENDOR) Definitions */ +#define STL_STLNVICPENDOR_VALID_Pos 18U /*!< STL STLNVICPENDOR: VALID Position */ +#define STL_STLNVICPENDOR_VALID_Msk (0x1UL << STL_STLNVICPENDOR_VALID_Pos) /*!< STL STLNVICPENDOR: VALID Mask */ + +#define STL_STLNVICPENDOR_TARGET_Pos 17U /*!< STL STLNVICPENDOR: TARGET Position */ +#define STL_STLNVICPENDOR_TARGET_Msk (0x1UL << STL_STLNVICPENDOR_TARGET_Pos) /*!< STL STLNVICPENDOR: TARGET Mask */ + +#define STL_STLNVICPENDOR_PRIORITY_Pos 9U /*!< STL STLNVICPENDOR: PRIORITY Position */ +#define STL_STLNVICPENDOR_PRIORITY_Msk (0xFFUL << STL_STLNVICPENDOR_PRIORITY_Pos) /*!< STL STLNVICPENDOR: PRIORITY Mask */ + +#define STL_STLNVICPENDOR_INTNUM_Pos 0U /*!< STL STLNVICPENDOR: INTNUM Position */ +#define STL_STLNVICPENDOR_INTNUM_Msk (0x1FFUL /*<< STL_STLNVICPENDOR_INTNUM_Pos*/) /*!< STL STLNVICPENDOR: INTNUM Mask */ + +/* STL Software Test Library Observation Register (STLNVICACTVOR) Definitions */ +#define STL_STLNVICACTVOR_VALID_Pos 18U /*!< STL STLNVICACTVOR: VALID Position */ +#define STL_STLNVICACTVOR_VALID_Msk (0x1UL << STL_STLNVICACTVOR_VALID_Pos) /*!< STL STLNVICACTVOR: VALID Mask */ + +#define STL_STLNVICACTVOR_TARGET_Pos 17U /*!< STL STLNVICACTVOR: TARGET Position */ +#define STL_STLNVICACTVOR_TARGET_Msk (0x1UL << STL_STLNVICACTVOR_TARGET_Pos) /*!< STL STLNVICACTVOR: TARGET Mask */ + +#define STL_STLNVICACTVOR_PRIORITY_Pos 9U /*!< STL STLNVICACTVOR: PRIORITY Position */ +#define STL_STLNVICACTVOR_PRIORITY_Msk (0xFFUL << STL_STLNVICACTVOR_PRIORITY_Pos) /*!< STL STLNVICACTVOR: PRIORITY Mask */ + +#define STL_STLNVICACTVOR_INTNUM_Pos 0U /*!< STL STLNVICACTVOR: INTNUM Position */ +#define STL_STLNVICACTVOR_INTNUM_Msk (0x1FFUL /*<< STL_STLNVICACTVOR_INTNUM_Pos*/) /*!< STL STLNVICACTVOR: INTNUM Mask */ + +/* STL Software Test Library Observation Register (STLIDMPUSR) Definitions */ +#define STL_STLIDMPUSR_ADDR_Pos 5U /*!< STL STLIDMPUSR: ADDR Position */ +#define STL_STLIDMPUSR_ADDR_Msk (0x7FFFFFFUL << STL_STLIDMPUSR_ADDR_Pos) /*!< STL STLIDMPUSR: ADDR Mask */ + +#define STL_STLIDMPUSR_INSTR_Pos 2U /*!< STL STLIDMPUSR: INSTR Position */ +#define STL_STLIDMPUSR_INSTR_Msk (0x1UL << STL_STLIDMPUSR_INSTR_Pos) /*!< STL STLIDMPUSR: INSTR Mask */ + +#define STL_STLIDMPUSR_DATA_Pos 1U /*!< STL STLIDMPUSR: DATA Position */ +#define STL_STLIDMPUSR_DATA_Msk (0x1UL << STL_STLIDMPUSR_DATA_Pos) /*!< STL STLIDMPUSR: DATA Mask */ + +/* STL Software Test Library Observation Register (STLIMPUOR) Definitions */ +#define STL_STLIMPUOR_HITREGION_Pos 9U /*!< STL STLIMPUOR: HITREGION Position */ +#define STL_STLIMPUOR_HITREGION_Msk (0xFFUL << STL_STLIMPUOR_HITREGION_Pos) /*!< STL STLIMPUOR: HITREGION Mask */ + +#define STL_STLIMPUOR_ATTR_Pos 0U /*!< STL STLIMPUOR: ATTR Position */ +#define STL_STLIMPUOR_ATTR_Msk (0x1FFUL /*<< STL_STLIMPUOR_ATTR_Pos*/) /*!< STL STLIMPUOR: ATTR Mask */ + +/* STL Software Test Library Observation Register (STLD0MPUOR) Definitions */ +#define STL_STLD0MPUOR_HITREGION_Pos 9U /*!< STL STLD0MPUOR: HITREGION Position */ +#define STL_STLD0MPUOR_HITREGION_Msk (0xFFUL << STL_STLD0MPUOR_HITREGION_Pos) /*!< STL STLD0MPUOR: HITREGION Mask */ + +#define STL_STLD0MPUOR_ATTR_Pos 0U /*!< STL STLD0MPUOR: ATTR Position */ +#define STL_STLD0MPUOR_ATTR_Msk (0x1FFUL /*<< STL_STLD0MPUOR_ATTR_Pos*/) /*!< STL STLD0MPUOR: ATTR Mask */ + +/* STL Software Test Library Observation Register (STLD1MPUOR) Definitions */ +#define STL_STLD1MPUOR_HITREGION_Pos 9U /*!< STL STLD1MPUOR: HITREGION Position */ +#define STL_STLD1MPUOR_HITREGION_Msk (0xFFUL << STL_STLD1MPUOR_HITREGION_Pos) /*!< STL STLD1MPUOR: HITREGION Mask */ + +#define STL_STLD1MPUOR_ATTR_Pos 0U /*!< STL STLD1MPUOR: ATTR Position */ +#define STL_STLD1MPUOR_ATTR_Msk (0x1FFUL /*<< STL_STLD1MPUOR_ATTR_Pos*/) /*!< STL STLD1MPUOR: ATTR Mask */ + +/*@}*/ /* end of group STL_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[3]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE4 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE8 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFEC (R/W) PMU Peripheral Identification Register 3 */ + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (0xFFFFUL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (0xFFFFUL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (0xFFUL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (0x3FUL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/** \brief PMU Authentication Status Register Definitions */ + +#define PMU_AUTHSTATUS_NSID_Pos 0U /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSID_Msk (0x3UL /*<< PMU_AUTHSTATUS_NSID_Pos*/) /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSNID_Pos 2U /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSNID_Msk (0x3UL << PMU_AUTHSTATUS_NSNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SID_Pos 4U /*!< PMU AUTHSTATUS: Secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_SID_Msk (0x3UL << PMU_AUTHSTATUS_SID_Pos) /*!< PMU AUTHSTATUS: Secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SNID_Pos 6U /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SNID_Msk (0x3UL << PMU_AUTHSTATUS_SNID_Pos) /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUID_Pos 16U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUID_Msk (0x3UL << PMU_AUTHSTATUS_NSUID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUNID_Pos 18U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUNID_Msk (0x3UL << PMU_AUTHSTATUS_NSUNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUID_Pos 20U /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_SUID_Msk (0x3UL << PMU_AUTHSTATUS_SUID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUNID_Pos 22U /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SUNID_Msk (0x3UL << PMU_AUTHSTATUS_SUNID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Mask */ + + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define MEMSYSCTL_BASE (0xE001E000UL) /*!< Memory System Control Base Address */ + #define ERRBNK_BASE (0xE001E100UL) /*!< Error Banking Base Address */ + #define PWRMODCTL_BASE (0xE001E300UL) /*!< Power Mode Control Base Address */ + #define EWIC_BASE (0xE001E400UL) /*!< External Wakeup Interrupt Controller Base Address */ + #define PRCCFGINF_BASE (0xE001E700UL) /*!< Processor Configuration Information Base Address */ + #define STL_BASE (0xE001E800UL) /*!< Software Test Library Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define ICB ((ICB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define MEMSYSCTL ((MemSysCtl_Type *) MEMSYSCTL_BASE ) /*!< Memory System Control configuration struct */ + #define ERRBNK ((ErrBnk_Type *) ERRBNK_BASE ) /*!< Error Banking configuration struct */ + #define PWRMODCTL ((PwrModCtl_Type *) PWRMODCTL_BASE ) /*!< Power Mode Control configuration struct */ + #define EWIC ((EWIC_Type *) EWIC_BASE ) /*!< EWIC configuration struct */ + #define PRCCFGINF ((PrcCfgInf_Type *) PRCCFGINF_BASE ) /*!< Processor Configuration Information configuration struct */ + #define STL ((STL_Type *) STL_BASE ) /*!< Software Test Library configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define ICB_NS ((ICB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ +#define ID_ADR (ID_AFR) /*!< SCB Auxiliary Feature Register */ + +/* 'SCnSCB' is deprecated and replaced by 'ICB' */ +typedef ICB_Type SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISCRITAXIRUW_Pos (ICB_ACTLR_DISCRITAXIRUW_Pos) +#define SCnSCB_ACTLR_DISCRITAXIRUW_Msk (ICB_ACTLR_DISCRITAXIRUW_Msk) + +#define SCnSCB_ACTLR_DISDI_Pos (ICB_ACTLR_DISDI_Pos) +#define SCnSCB_ACTLR_DISDI_Msk (ICB_ACTLR_DISDI_Msk) + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos (ICB_ACTLR_DISCRITAXIRUR_Pos) +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (ICB_ACTLR_DISCRITAXIRUR_Msk) + +#define SCnSCB_ACTLR_EVENTBUSEN_Pos (ICB_ACTLR_EVENTBUSEN_Pos) +#define SCnSCB_ACTLR_EVENTBUSEN_Msk (ICB_ACTLR_EVENTBUSEN_Msk) + +#define SCnSCB_ACTLR_EVENTBUSEN_S_Pos (ICB_ACTLR_EVENTBUSEN_S_Pos) +#define SCnSCB_ACTLR_EVENTBUSEN_S_Msk (ICB_ACTLR_EVENTBUSEN_S_Msk) + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos (ICB_ACTLR_DISITMATBFLUSH_Pos) +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (ICB_ACTLR_DISITMATBFLUSH_Msk) + +#define SCnSCB_ACTLR_DISNWAMODE_Pos (ICB_ACTLR_DISNWAMODE_Pos) +#define SCnSCB_ACTLR_DISNWAMODE_Msk (ICB_ACTLR_DISNWAMODE_Msk) + +#define SCnSCB_ACTLR_FPEXCODIS_Pos (ICB_ACTLR_FPEXCODIS_Pos) +#define SCnSCB_ACTLR_FPEXCODIS_Msk (ICB_ACTLR_FPEXCODIS_Msk) + +#define SCnSCB_ACTLR_DISOLAP_Pos (ICB_ACTLR_DISOLAP_Pos) +#define SCnSCB_ACTLR_DISOLAP_Msk (ICB_ACTLR_DISOLAP_Msk) + +#define SCnSCB_ACTLR_DISOLAPS_Pos (ICB_ACTLR_DISOLAPS_Pos) +#define SCnSCB_ACTLR_DISOLAPS_Msk (ICB_ACTLR_DISOLAPS_Msk) + +#define SCnSCB_ACTLR_DISLOBR_Pos (ICB_ACTLR_DISLOBR_Pos) +#define SCnSCB_ACTLR_DISLOBR_Msk (ICB_ACTLR_DISLOBR_Msk) + +#define SCnSCB_ACTLR_DISLO_Pos (ICB_ACTLR_DISLO_Pos) +#define SCnSCB_ACTLR_DISLO_Msk (ICB_ACTLR_DISLO_Msk) + +#define SCnSCB_ACTLR_DISLOLEP_Pos (ICB_ACTLR_DISLOLEP_Pos) +#define SCnSCB_ACTLR_DISLOLEP_Msk (ICB_ACTLR_DISLOLEP_Msk) + +#define SCnSCB_ACTLR_DISFOLD_Pos (ICB_ACTLR_DISFOLD_Pos) +#define SCnSCB_ACTLR_DISFOLD_Msk (ICB_ACTLR_DISFOLD_Msk) + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos (ICB_ICTR_INTLINESNUM_Pos) +#define SCnSCB_ICTR_INTLINESNUM_Msk (ICB_ICTR_INTLINESNUM_Msk) + +#define SCnSCB (ICB) +#define SCnSCB_NS (ICB_NS) + +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +/** + \brief Cortex-M55 PMU events + \note Architectural PMU events can be found in pmu_armv8.h +*/ + +#define ARMCM55_PMU_ECC_ERR 0xC000 /*!< Any ECC error */ +#define ARMCM55_PMU_ECC_ERR_FATAL 0xC001 /*!< Any fatal ECC error */ +#define ARMCM55_PMU_ECC_ERR_DCACHE 0xC010 /*!< Any ECC error in the data cache */ +#define ARMCM55_PMU_ECC_ERR_ICACHE 0xC011 /*!< Any ECC error in the instruction cache */ +#define ARMCM55_PMU_ECC_ERR_FATAL_DCACHE 0xC012 /*!< Any fatal ECC error in the data cache */ +#define ARMCM55_PMU_ECC_ERR_FATAL_ICACHE 0xC013 /*!< Any fatal ECC error in the instruction cache*/ +#define ARMCM55_PMU_ECC_ERR_DTCM 0xC020 /*!< Any ECC error in the DTCM */ +#define ARMCM55_PMU_ECC_ERR_ITCM 0xC021 /*!< Any ECC error in the ITCM */ +#define ARMCM55_PMU_ECC_ERR_FATAL_DTCM 0xC022 /*!< Any fatal ECC error in the DTCM */ +#define ARMCM55_PMU_ECC_ERR_FATAL_ITCM 0xC023 /*!< Any fatal ECC error in the ITCM */ +#define ARMCM55_PMU_PF_LINEFILL 0xC100 /*!< A prefetcher starts a line-fill */ +#define ARMCM55_PMU_PF_CANCEL 0xC101 /*!< A prefetcher stops prefetching */ +#define ARMCM55_PMU_PF_DROP_LINEFILL 0xC102 /*!< A linefill triggered by a prefetcher has been dropped because of lack of buffering */ +#define ARMCM55_PMU_NWAMODE_ENTER 0xC200 /*!< No write-allocate mode entry */ +#define ARMCM55_PMU_NWAMODE 0xC201 /*!< Write-allocate store is not allocated into the data cache due to no-write-allocate mode */ +#define ARMCM55_PMU_SAHB_ACCESS 0xC300 /*!< Read or write access on the S-AHB interface to the TCM */ +#define ARMCM55_PMU_PAHB_ACCESS 0xC301 /*!< Read or write access to the P-AHB write interface */ +#define ARMCM55_PMU_AXI_WRITE_ACCESS 0xC302 /*!< Any beat access to M-AXI write interface */ +#define ARMCM55_PMU_AXI_READ_ACCESS 0xC303 /*!< Any beat access to M-AXI read interface */ +#define ARMCM55_PMU_DOSTIMEOUT_DOUBLE 0xC400 /*!< Denial of Service timeout has fired twice and caused buffers to drain to allow forward progress */ +#define ARMCM55_PMU_DOSTIMEOUT_TRIPLE 0xC401 /*!< Denial of Service timeout has fired three times and blocked the LSU to force forward progress */ + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM55_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm7.h b/Libraries/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..010506e --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm7.h @@ -0,0 +1,2366 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.6 + * @date 04. June 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ + uint32_t RESERVED7[5U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< \deprecated SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< \deprecated SCB CACR: ECCEN Mask */ + +#define SCB_CACR_ECCDIS_Pos 1U /*!< SCB CACR: ECCDIS Position */ +#define SCB_CACR_ECCDIS_Msk (1UL << SCB_CACR_ECCDIS_Pos) /*!< SCB CACR: ECCDIS Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBSCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBSCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBSCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_cm85.h b/Libraries/CMSIS/Include/core_cm85.h new file mode 100644 index 0000000..6046311 --- /dev/null +++ b/Libraries/CMSIS/Include/core_cm85.h @@ -0,0 +1,4672 @@ +/**************************************************************************//** + * @file core_cm85.h + * @brief CMSIS Cortex-M85 Core Peripheral Access Layer Header File + * @version V1.0.4 + * @date 21. April 2022 + ******************************************************************************/ +/* + * Copyright (c) 2022 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM85_H_GENERIC +#define __CORE_CM85_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M85 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM85 definitions */ + +#define __CORTEX_M (85U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM85_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM85_H_DEPENDANT +#define __CORE_CM85_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM85_REV + #define __CM85_REV 0x0001U + #warning "__CM85_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 8U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 8 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M85 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core EWIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core PMU Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:1; /*!< bit: 20 Reserved */ + uint32_t B:1; /*!< bit: 21 BTI active (read 0) */ + uint32_t _reserved2:2; /*!< bit: 22..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_B_Pos 21U /*!< xPSR: B Position */ +#define xPSR_B_Msk (1UL << xPSR_B_Pos) /*!< xPSR: B Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t BTI_EN:1; /*!< bit: 4 Privileged branch target identification enable */ + uint32_t UBTI_EN:1; /*!< bit: 5 Unprivileged branch target identification enable */ + uint32_t PAC_EN:1; /*!< bit: 6 Privileged pointer authentication enable */ + uint32_t UPAC_EN:1; /*!< bit: 7 Unprivileged pointer authentication enable */ + uint32_t _reserved1:24; /*!< bit: 8..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_UPAC_EN_Pos 7U /*!< CONTROL: UPAC_EN Position */ +#define CONTROL_UPAC_EN_Msk (1UL << CONTROL_UPAC_EN_Pos) /*!< CONTROL: UPAC_EN Mask */ + +#define CONTROL_PAC_EN_Pos 6U /*!< CONTROL: PAC_EN Position */ +#define CONTROL_PAC_EN_Msk (1UL << CONTROL_PAC_EN_Pos) /*!< CONTROL: PAC_EN Mask */ + +#define CONTROL_UBTI_EN_Pos 5U /*!< CONTROL: UBTI_EN Position */ +#define CONTROL_UBTI_EN_Msk (1UL << CONTROL_UBTI_EN_Pos) /*!< CONTROL: UBTI_EN Mask */ + +#define CONTROL_BTI_EN_Pos 4U /*!< CONTROL: BTI_EN Position */ +#define CONTROL_BTI_EN_Msk (1UL << CONTROL_BTI_EN_Pos) /*!< CONTROL: BTI_EN Mask */ + +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED7[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ICB Implementation Control Block register (ICB) + \brief Type definitions for the Implementation Control Block Register + @{ + */ + +/** + \brief Structure type to access the Implementation Control Block (ICB). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} ICB_Type; + +/* Auxiliary Control Register Definitions */ +#define ICB_ACTLR_DISCRITAXIRUW_Pos 27U /*!< ACTLR: DISCRITAXIRUW Position */ +#define ICB_ACTLR_DISCRITAXIRUW_Msk (1UL << ICB_ACTLR_DISCRITAXIRUW_Pos) /*!< ACTLR: DISCRITAXIRUW Mask */ + +#define ICB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define ICB_ACTLR_DISCRITAXIRUR_Msk (1UL << ICB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define ICB_ACTLR_EVENTBUSEN_Pos 14U /*!< ACTLR: EVENTBUSEN Position */ +#define ICB_ACTLR_EVENTBUSEN_Msk (1UL << ICB_ACTLR_EVENTBUSEN_Pos) /*!< ACTLR: EVENTBUSEN Mask */ + +#define ICB_ACTLR_EVENTBUSEN_S_Pos 13U /*!< ACTLR: EVENTBUSEN_S Position */ +#define ICB_ACTLR_EVENTBUSEN_S_Msk (1UL << ICB_ACTLR_EVENTBUSEN_S_Pos) /*!< ACTLR: EVENTBUSEN_S Mask */ + +#define ICB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define ICB_ACTLR_DISITMATBFLUSH_Msk (1UL << ICB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define ICB_ACTLR_DISNWAMODE_Pos 11U /*!< ACTLR: DISNWAMODE Position */ +#define ICB_ACTLR_DISNWAMODE_Msk (1UL << ICB_ACTLR_DISNWAMODE_Pos) /*!< ACTLR: DISNWAMODE Mask */ + +#define ICB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define ICB_ACTLR_FPEXCODIS_Msk (1UL << ICB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +/* Interrupt Controller Type Register Definitions */ +#define ICB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define ICB_ICTR_INTLINESNUM_Msk (0xFUL /*<< ICB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_ICB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup MemSysCtl_Type Memory System Control Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Memory System Control Registers (MEMSYSCTL) + @{ + */ + +/** + \brief Structure type to access the Memory System Control Registers (MEMSYSCTL). + */ +typedef struct +{ + __IOM uint32_t MSCR; /*!< Offset: 0x000 (R/W) Memory System Control Register */ + __IOM uint32_t PFCR; /*!< Offset: 0x004 (R/W) Prefetcher Control Register */ + uint32_t RESERVED1[2U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x010 (R/W) ITCM Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x014 (R/W) DTCM Control Register */ + __IOM uint32_t PAHBCR; /*!< Offset: 0x018 (R/W) P-AHB Control Register */ + uint32_t RESERVED2[313U]; + __IOM uint32_t ITGU_CTRL; /*!< Offset: 0x500 (R/W) ITGU Control Register */ + __IOM uint32_t ITGU_CFG; /*!< Offset: 0x504 (R/W) ITGU Configuration Register */ + uint32_t RESERVED3[2U]; + __IOM uint32_t ITGU_LUT[16U]; /*!< Offset: 0x510 (R/W) ITGU Look Up Table Register */ + uint32_t RESERVED4[44U]; + __IOM uint32_t DTGU_CTRL; /*!< Offset: 0x600 (R/W) DTGU Control Registers */ + __IOM uint32_t DTGU_CFG; /*!< Offset: 0x604 (R/W) DTGU Configuration Register */ + uint32_t RESERVED5[2U]; + __IOM uint32_t DTGU_LUT[16U]; /*!< Offset: 0x610 (R/W) DTGU Look Up Table Register */ +} MemSysCtl_Type; + +/* MEMSYSCTL Memory System Control Register (MSCR) Register Definitions */ +#define MEMSYSCTL_MSCR_CPWRDN_Pos 17U /*!< MEMSYSCTL MSCR: CPWRDN Position */ +#define MEMSYSCTL_MSCR_CPWRDN_Msk (0x1UL << MEMSYSCTL_MSCR_CPWRDN_Pos) /*!< MEMSYSCTL MSCR: CPWRDN Mask */ + +#define MEMSYSCTL_MSCR_DCCLEAN_Pos 16U /*!< MEMSYSCTL MSCR: DCCLEAN Position */ +#define MEMSYSCTL_MSCR_DCCLEAN_Msk (0x1UL << MEMSYSCTL_MSCR_DCCLEAN_Pos) /*!< MEMSYSCTL MSCR: DCCLEAN Mask */ + +#define MEMSYSCTL_MSCR_ICACTIVE_Pos 13U /*!< MEMSYSCTL MSCR: ICACTIVE Position */ +#define MEMSYSCTL_MSCR_ICACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_ICACTIVE_Pos) /*!< MEMSYSCTL MSCR: ICACTIVE Mask */ + +#define MEMSYSCTL_MSCR_DCACTIVE_Pos 12U /*!< MEMSYSCTL MSCR: DCACTIVE Position */ +#define MEMSYSCTL_MSCR_DCACTIVE_Msk (0x1UL << MEMSYSCTL_MSCR_DCACTIVE_Pos) /*!< MEMSYSCTL MSCR: DCACTIVE Mask */ + +#define MEMSYSCTL_MSCR_EVECCFAULT_Pos 3U /*!< MEMSYSCTL MSCR: EVECCFAULT Position */ +#define MEMSYSCTL_MSCR_EVECCFAULT_Msk (0x1UL << MEMSYSCTL_MSCR_EVECCFAULT_Pos) /*!< MEMSYSCTL MSCR: EVECCFAULT Mask */ + +#define MEMSYSCTL_MSCR_FORCEWT_Pos 2U /*!< MEMSYSCTL MSCR: FORCEWT Position */ +#define MEMSYSCTL_MSCR_FORCEWT_Msk (0x1UL << MEMSYSCTL_MSCR_FORCEWT_Pos) /*!< MEMSYSCTL MSCR: FORCEWT Mask */ + +#define MEMSYSCTL_MSCR_ECCEN_Pos 1U /*!< MEMSYSCTL MSCR: ECCEN Position */ +#define MEMSYSCTL_MSCR_ECCEN_Msk (0x1UL << MEMSYSCTL_MSCR_ECCEN_Pos) /*!< MEMSYSCTL MSCR: ECCEN Mask */ + +/* MEMSYSCTL Prefetcher Control Register (PFCR) Register Definitions */ +#define MEMSYSCTL_PFCR_DIS_NLP_Pos 7U /*!< MEMSYSCTL PFCR: DIS_NLP Position */ +#define MEMSYSCTL_PFCR_DIS_NLP_Msk (0x1UL << MEMSYSCTL_PFCR_DIS_NLP_Pos) /*!< MEMSYSCTL PFCR: DIS_NLP Mask */ + +#define MEMSYSCTL_PFCR_ENABLE_Pos 0U /*!< MEMSYSCTL PFCR: ENABLE Position */ +#define MEMSYSCTL_PFCR_ENABLE_Msk (0x1UL /*<< MEMSYSCTL_PFCR_ENABLE_Pos*/) /*!< MEMSYSCTL PFCR: ENABLE Mask */ + +/* MEMSYSCTL ITCM Control Register (ITCMCR) Register Definitions */ +#define MEMSYSCTL_ITCMCR_SZ_Pos 3U /*!< MEMSYSCTL ITCMCR: SZ Position */ +#define MEMSYSCTL_ITCMCR_SZ_Msk (0xFUL << MEMSYSCTL_ITCMCR_SZ_Pos) /*!< MEMSYSCTL ITCMCR: SZ Mask */ + +#define MEMSYSCTL_ITCMCR_EN_Pos 0U /*!< MEMSYSCTL ITCMCR: EN Position */ +#define MEMSYSCTL_ITCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_ITCMCR_EN_Pos*/) /*!< MEMSYSCTL ITCMCR: EN Mask */ + +/* MEMSYSCTL DTCM Control Register (DTCMCR) Register Definitions */ +#define MEMSYSCTL_DTCMCR_SZ_Pos 3U /*!< MEMSYSCTL DTCMCR: SZ Position */ +#define MEMSYSCTL_DTCMCR_SZ_Msk (0xFUL << MEMSYSCTL_DTCMCR_SZ_Pos) /*!< MEMSYSCTL DTCMCR: SZ Mask */ + +#define MEMSYSCTL_DTCMCR_EN_Pos 0U /*!< MEMSYSCTL DTCMCR: EN Position */ +#define MEMSYSCTL_DTCMCR_EN_Msk (0x1UL /*<< MEMSYSCTL_DTCMCR_EN_Pos*/) /*!< MEMSYSCTL DTCMCR: EN Mask */ + +/* MEMSYSCTL P-AHB Control Register (PAHBCR) Register Definitions */ +#define MEMSYSCTL_PAHBCR_SZ_Pos 1U /*!< MEMSYSCTL PAHBCR: SZ Position */ +#define MEMSYSCTL_PAHBCR_SZ_Msk (0x7UL << MEMSYSCTL_PAHBCR_SZ_Pos) /*!< MEMSYSCTL PAHBCR: SZ Mask */ + +#define MEMSYSCTL_PAHBCR_EN_Pos 0U /*!< MEMSYSCTL PAHBCR: EN Position */ +#define MEMSYSCTL_PAHBCR_EN_Msk (0x1UL /*<< MEMSYSCTL_PAHBCR_EN_Pos*/) /*!< MEMSYSCTL PAHBCR: EN Mask */ + +/* MEMSYSCTL ITGU Control Register (ITGU_CTRL) Register Definitions */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL ITGU_CTRL: DEREN Position */ +#define MEMSYSCTL_ITGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_ITGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL ITGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL ITGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_ITGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_ITGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL ITGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL ITGU Configuration Register (ITGU_CFG) Register Definitions */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL ITGU_CFG: PRESENT Position */ +#define MEMSYSCTL_ITGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_ITGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL ITGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_ITGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_ITGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL ITGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL ITGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_ITGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_ITGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL ITGU_CFG: BLKSZ Mask */ + +/* MEMSYSCTL DTGU Control Registers (DTGU_CTRL) Register Definitions */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Pos 1U /*!< MEMSYSCTL DTGU_CTRL: DEREN Position */ +#define MEMSYSCTL_DTGU_CTRL_DEREN_Msk (0x1UL << MEMSYSCTL_DTGU_CTRL_DEREN_Pos) /*!< MEMSYSCTL DTGU_CTRL: DEREN Mask */ + +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Pos 0U /*!< MEMSYSCTL DTGU_CTRL: DBFEN Position */ +#define MEMSYSCTL_DTGU_CTRL_DBFEN_Msk (0x1UL /*<< MEMSYSCTL_DTGU_CTRL_DBFEN_Pos*/) /*!< MEMSYSCTL DTGU_CTRL: DBFEN Mask */ + +/* MEMSYSCTL DTGU Configuration Register (DTGU_CFG) Register Definitions */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Pos 31U /*!< MEMSYSCTL DTGU_CFG: PRESENT Position */ +#define MEMSYSCTL_DTGU_CFG_PRESENT_Msk (0x1UL << MEMSYSCTL_DTGU_CFG_PRESENT_Pos) /*!< MEMSYSCTL DTGU_CFG: PRESENT Mask */ + +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos 8U /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Position */ +#define MEMSYSCTL_DTGU_CFG_NUMBLKS_Msk (0xFUL << MEMSYSCTL_DTGU_CFG_NUMBLKS_Pos) /*!< MEMSYSCTL DTGU_CFG: NUMBLKS Mask */ + +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Pos 0U /*!< MEMSYSCTL DTGU_CFG: BLKSZ Position */ +#define MEMSYSCTL_DTGU_CFG_BLKSZ_Msk (0xFUL /*<< MEMSYSCTL_DTGU_CFG_BLKSZ_Pos*/) /*!< MEMSYSCTL DTGU_CFG: BLKSZ Mask */ + + +/*@}*/ /* end of group MemSysCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PwrModCtl_Type Power Mode Control Registers + \brief Type definitions for the Power Mode Control Registers (PWRMODCTL) + @{ + */ + +/** + \brief Structure type to access the Power Mode Control Registers (PWRMODCTL). + */ +typedef struct +{ + __IOM uint32_t CPDLPSTATE; /*!< Offset: 0x000 (R/W) Core Power Domain Low Power State Register */ + __IOM uint32_t DPDLPSTATE; /*!< Offset: 0x004 (R/W) Debug Power Domain Low Power State Register */ +} PwrModCtl_Type; + +/* PWRMODCTL Core Power Domain Low Power State (CPDLPSTATE) Register Definitions */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos 8U /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_RLPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_RLPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: RLPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos 4U /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_ELPSTATE_Msk (0x3UL << PWRMODCTL_CPDLPSTATE_ELPSTATE_Pos) /*!< PWRMODCTL CPDLPSTATE: ELPSTATE Mask */ + +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos 0U /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Position */ +#define PWRMODCTL_CPDLPSTATE_CLPSTATE_Msk (0x3UL /*<< PWRMODCTL_CPDLPSTATE_CLPSTATE_Pos*/) /*!< PWRMODCTL CPDLPSTATE: CLPSTATE Mask */ + +/* PWRMODCTL Debug Power Domain Low Power State (DPDLPSTATE) Register Definitions */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos 0U /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Position */ +#define PWRMODCTL_DPDLPSTATE_DLPSTATE_Msk (0x3UL /*<< PWRMODCTL_DPDLPSTATE_DLPSTATE_Pos*/) /*!< PWRMODCTL DPDLPSTATE: DLPSTATE Mask */ + +/*@}*/ /* end of group PwrModCtl_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup EWIC_Type External Wakeup Interrupt Controller Registers + \brief Type definitions for the External Wakeup Interrupt Controller Registers (EWIC) + @{ + */ + +/** + \brief Structure type to access the External Wakeup Interrupt Controller Registers (EWIC). + */ +typedef struct +{ + __OM uint32_t EVENTSPR; /*!< Offset: 0x000 ( /W) Event Set Pending Register */ + uint32_t RESERVED0[31U]; + __IM uint32_t EVENTMASKA; /*!< Offset: 0x080 (R/W) Event Mask A Register */ + __IM uint32_t EVENTMASK[15]; /*!< Offset: 0x084 (R/W) Event Mask Register */ +} EWIC_Type; + +/* EWIC External Wakeup Interrupt Controller (EVENTSPR) Register Definitions */ +#define EWIC_EVENTSPR_EDBGREQ_Pos 2U /*!< EWIC EVENTSPR: EDBGREQ Position */ +#define EWIC_EVENTSPR_EDBGREQ_Msk (0x1UL << EWIC_EVENTSPR_EDBGREQ_Pos) /*!< EWIC EVENTSPR: EDBGREQ Mask */ + +#define EWIC_EVENTSPR_NMI_Pos 1U /*!< EWIC EVENTSPR: NMI Position */ +#define EWIC_EVENTSPR_NMI_Msk (0x1UL << EWIC_EVENTSPR_NMI_Pos) /*!< EWIC EVENTSPR: NMI Mask */ + +#define EWIC_EVENTSPR_EVENT_Pos 0U /*!< EWIC EVENTSPR: EVENT Position */ +#define EWIC_EVENTSPR_EVENT_Msk (0x1UL /*<< EWIC_EVENTSPR_EVENT_Pos*/) /*!< EWIC EVENTSPR: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASKA) Register Definitions */ +#define EWIC_EVENTMASKA_EDBGREQ_Pos 2U /*!< EWIC EVENTMASKA: EDBGREQ Position */ +#define EWIC_EVENTMASKA_EDBGREQ_Msk (0x1UL << EWIC_EVENTMASKA_EDBGREQ_Pos) /*!< EWIC EVENTMASKA: EDBGREQ Mask */ + +#define EWIC_EVENTMASKA_NMI_Pos 1U /*!< EWIC EVENTMASKA: NMI Position */ +#define EWIC_EVENTMASKA_NMI_Msk (0x1UL << EWIC_EVENTMASKA_NMI_Pos) /*!< EWIC EVENTMASKA: NMI Mask */ + +#define EWIC_EVENTMASKA_EVENT_Pos 0U /*!< EWIC EVENTMASKA: EVENT Position */ +#define EWIC_EVENTMASKA_EVENT_Msk (0x1UL /*<< EWIC_EVENTMASKA_EVENT_Pos*/) /*!< EWIC EVENTMASKA: EVENT Mask */ + +/* EWIC External Wakeup Interrupt Controller (EVENTMASK) Register Definitions */ +#define EWIC_EVENTMASK_IRQ_Pos 0U /*!< EWIC EVENTMASKA: IRQ Position */ +#define EWIC_EVENTMASK_IRQ_Msk (0xFFFFFFFFUL /*<< EWIC_EVENTMASKA_IRQ_Pos*/) /*!< EWIC EVENTMASKA: IRQ Mask */ + +/*@}*/ /* end of group EWIC_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup ErrBnk_Type Error Banking Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Error Banking Registers (ERRBNK) + @{ + */ + +/** + \brief Structure type to access the Error Banking Registers (ERRBNK). + */ +typedef struct +{ + __IOM uint32_t IEBR0; /*!< Offset: 0x000 (R/W) Instruction Cache Error Bank Register 0 */ + __IOM uint32_t IEBR1; /*!< Offset: 0x004 (R/W) Instruction Cache Error Bank Register 1 */ + uint32_t RESERVED0[2U]; + __IOM uint32_t DEBR0; /*!< Offset: 0x010 (R/W) Data Cache Error Bank Register 0 */ + __IOM uint32_t DEBR1; /*!< Offset: 0x014 (R/W) Data Cache Error Bank Register 1 */ + uint32_t RESERVED1[2U]; + __IOM uint32_t TEBR0; /*!< Offset: 0x020 (R/W) TCM Error Bank Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t TEBR1; /*!< Offset: 0x028 (R/W) TCM Error Bank Register 1 */ +} ErrBnk_Type; + +/* ERRBNK Instruction Cache Error Bank Register 0 (IEBR0) Register Definitions */ +#define ERRBNK_IEBR0_SWDEF_Pos 30U /*!< ERRBNK IEBR0: SWDEF Position */ +#define ERRBNK_IEBR0_SWDEF_Msk (0x3UL << ERRBNK_IEBR0_SWDEF_Pos) /*!< ERRBNK IEBR0: SWDEF Mask */ + +#define ERRBNK_IEBR0_BANK_Pos 16U /*!< ERRBNK IEBR0: BANK Position */ +#define ERRBNK_IEBR0_BANK_Msk (0x1UL << ERRBNK_IEBR0_BANK_Pos) /*!< ERRBNK IEBR0: BANK Mask */ + +#define ERRBNK_IEBR0_LOCATION_Pos 2U /*!< ERRBNK IEBR0: LOCATION Position */ +#define ERRBNK_IEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR0_LOCATION_Pos) /*!< ERRBNK IEBR0: LOCATION Mask */ + +#define ERRBNK_IEBR0_LOCKED_Pos 1U /*!< ERRBNK IEBR0: LOCKED Position */ +#define ERRBNK_IEBR0_LOCKED_Msk (0x1UL << ERRBNK_IEBR0_LOCKED_Pos) /*!< ERRBNK IEBR0: LOCKED Mask */ + +#define ERRBNK_IEBR0_VALID_Pos 0U /*!< ERRBNK IEBR0: VALID Position */ +#define ERRBNK_IEBR0_VALID_Msk (0x1UL << /*ERRBNK_IEBR0_VALID_Pos*/) /*!< ERRBNK IEBR0: VALID Mask */ + +/* ERRBNK Instruction Cache Error Bank Register 1 (IEBR1) Register Definitions */ +#define ERRBNK_IEBR1_SWDEF_Pos 30U /*!< ERRBNK IEBR1: SWDEF Position */ +#define ERRBNK_IEBR1_SWDEF_Msk (0x3UL << ERRBNK_IEBR1_SWDEF_Pos) /*!< ERRBNK IEBR1: SWDEF Mask */ + +#define ERRBNK_IEBR1_BANK_Pos 16U /*!< ERRBNK IEBR1: BANK Position */ +#define ERRBNK_IEBR1_BANK_Msk (0x1UL << ERRBNK_IEBR1_BANK_Pos) /*!< ERRBNK IEBR1: BANK Mask */ + +#define ERRBNK_IEBR1_LOCATION_Pos 2U /*!< ERRBNK IEBR1: LOCATION Position */ +#define ERRBNK_IEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_IEBR1_LOCATION_Pos) /*!< ERRBNK IEBR1: LOCATION Mask */ + +#define ERRBNK_IEBR1_LOCKED_Pos 1U /*!< ERRBNK IEBR1: LOCKED Position */ +#define ERRBNK_IEBR1_LOCKED_Msk (0x1UL << ERRBNK_IEBR1_LOCKED_Pos) /*!< ERRBNK IEBR1: LOCKED Mask */ + +#define ERRBNK_IEBR1_VALID_Pos 0U /*!< ERRBNK IEBR1: VALID Position */ +#define ERRBNK_IEBR1_VALID_Msk (0x1UL << /*ERRBNK_IEBR1_VALID_Pos*/) /*!< ERRBNK IEBR1: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 0 (DEBR0) Register Definitions */ +#define ERRBNK_DEBR0_SWDEF_Pos 30U /*!< ERRBNK DEBR0: SWDEF Position */ +#define ERRBNK_DEBR0_SWDEF_Msk (0x3UL << ERRBNK_DEBR0_SWDEF_Pos) /*!< ERRBNK DEBR0: SWDEF Mask */ + +#define ERRBNK_DEBR0_TYPE_Pos 17U /*!< ERRBNK DEBR0: TYPE Position */ +#define ERRBNK_DEBR0_TYPE_Msk (0x1UL << ERRBNK_DEBR0_TYPE_Pos) /*!< ERRBNK DEBR0: TYPE Mask */ + +#define ERRBNK_DEBR0_BANK_Pos 16U /*!< ERRBNK DEBR0: BANK Position */ +#define ERRBNK_DEBR0_BANK_Msk (0x1UL << ERRBNK_DEBR0_BANK_Pos) /*!< ERRBNK DEBR0: BANK Mask */ + +#define ERRBNK_DEBR0_LOCATION_Pos 2U /*!< ERRBNK DEBR0: LOCATION Position */ +#define ERRBNK_DEBR0_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR0_LOCATION_Pos) /*!< ERRBNK DEBR0: LOCATION Mask */ + +#define ERRBNK_DEBR0_LOCKED_Pos 1U /*!< ERRBNK DEBR0: LOCKED Position */ +#define ERRBNK_DEBR0_LOCKED_Msk (0x1UL << ERRBNK_DEBR0_LOCKED_Pos) /*!< ERRBNK DEBR0: LOCKED Mask */ + +#define ERRBNK_DEBR0_VALID_Pos 0U /*!< ERRBNK DEBR0: VALID Position */ +#define ERRBNK_DEBR0_VALID_Msk (0x1UL << /*ERRBNK_DEBR0_VALID_Pos*/) /*!< ERRBNK DEBR0: VALID Mask */ + +/* ERRBNK Data Cache Error Bank Register 1 (DEBR1) Register Definitions */ +#define ERRBNK_DEBR1_SWDEF_Pos 30U /*!< ERRBNK DEBR1: SWDEF Position */ +#define ERRBNK_DEBR1_SWDEF_Msk (0x3UL << ERRBNK_DEBR1_SWDEF_Pos) /*!< ERRBNK DEBR1: SWDEF Mask */ + +#define ERRBNK_DEBR1_TYPE_Pos 17U /*!< ERRBNK DEBR1: TYPE Position */ +#define ERRBNK_DEBR1_TYPE_Msk (0x1UL << ERRBNK_DEBR1_TYPE_Pos) /*!< ERRBNK DEBR1: TYPE Mask */ + +#define ERRBNK_DEBR1_BANK_Pos 16U /*!< ERRBNK DEBR1: BANK Position */ +#define ERRBNK_DEBR1_BANK_Msk (0x1UL << ERRBNK_DEBR1_BANK_Pos) /*!< ERRBNK DEBR1: BANK Mask */ + +#define ERRBNK_DEBR1_LOCATION_Pos 2U /*!< ERRBNK DEBR1: LOCATION Position */ +#define ERRBNK_DEBR1_LOCATION_Msk (0x3FFFUL << ERRBNK_DEBR1_LOCATION_Pos) /*!< ERRBNK DEBR1: LOCATION Mask */ + +#define ERRBNK_DEBR1_LOCKED_Pos 1U /*!< ERRBNK DEBR1: LOCKED Position */ +#define ERRBNK_DEBR1_LOCKED_Msk (0x1UL << ERRBNK_DEBR1_LOCKED_Pos) /*!< ERRBNK DEBR1: LOCKED Mask */ + +#define ERRBNK_DEBR1_VALID_Pos 0U /*!< ERRBNK DEBR1: VALID Position */ +#define ERRBNK_DEBR1_VALID_Msk (0x1UL << /*ERRBNK_DEBR1_VALID_Pos*/) /*!< ERRBNK DEBR1: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 0 (TEBR0) Register Definitions */ +#define ERRBNK_TEBR0_SWDEF_Pos 30U /*!< ERRBNK TEBR0: SWDEF Position */ +#define ERRBNK_TEBR0_SWDEF_Msk (0x3UL << ERRBNK_TEBR0_SWDEF_Pos) /*!< ERRBNK TEBR0: SWDEF Mask */ + +#define ERRBNK_TEBR0_POISON_Pos 28U /*!< ERRBNK TEBR0: POISON Position */ +#define ERRBNK_TEBR0_POISON_Msk (0x1UL << ERRBNK_TEBR0_POISON_Pos) /*!< ERRBNK TEBR0: POISON Mask */ + +#define ERRBNK_TEBR0_TYPE_Pos 27U /*!< ERRBNK TEBR0: TYPE Position */ +#define ERRBNK_TEBR0_TYPE_Msk (0x1UL << ERRBNK_TEBR0_TYPE_Pos) /*!< ERRBNK TEBR0: TYPE Mask */ + +#define ERRBNK_TEBR0_BANK_Pos 24U /*!< ERRBNK TEBR0: BANK Position */ +#define ERRBNK_TEBR0_BANK_Msk (0x3UL << ERRBNK_TEBR0_BANK_Pos) /*!< ERRBNK TEBR0: BANK Mask */ + +#define ERRBNK_TEBR0_LOCATION_Pos 2U /*!< ERRBNK TEBR0: LOCATION Position */ +#define ERRBNK_TEBR0_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR0_LOCATION_Pos) /*!< ERRBNK TEBR0: LOCATION Mask */ + +#define ERRBNK_TEBR0_LOCKED_Pos 1U /*!< ERRBNK TEBR0: LOCKED Position */ +#define ERRBNK_TEBR0_LOCKED_Msk (0x1UL << ERRBNK_TEBR0_LOCKED_Pos) /*!< ERRBNK TEBR0: LOCKED Mask */ + +#define ERRBNK_TEBR0_VALID_Pos 0U /*!< ERRBNK TEBR0: VALID Position */ +#define ERRBNK_TEBR0_VALID_Msk (0x1UL << /*ERRBNK_TEBR0_VALID_Pos*/) /*!< ERRBNK TEBR0: VALID Mask */ + +/* ERRBNK TCM Error Bank Register 1 (TEBR1) Register Definitions */ +#define ERRBNK_TEBR1_SWDEF_Pos 30U /*!< ERRBNK TEBR1: SWDEF Position */ +#define ERRBNK_TEBR1_SWDEF_Msk (0x3UL << ERRBNK_TEBR1_SWDEF_Pos) /*!< ERRBNK TEBR1: SWDEF Mask */ + +#define ERRBNK_TEBR1_POISON_Pos 28U /*!< ERRBNK TEBR1: POISON Position */ +#define ERRBNK_TEBR1_POISON_Msk (0x1UL << ERRBNK_TEBR1_POISON_Pos) /*!< ERRBNK TEBR1: POISON Mask */ + +#define ERRBNK_TEBR1_TYPE_Pos 27U /*!< ERRBNK TEBR1: TYPE Position */ +#define ERRBNK_TEBR1_TYPE_Msk (0x1UL << ERRBNK_TEBR1_TYPE_Pos) /*!< ERRBNK TEBR1: TYPE Mask */ + +#define ERRBNK_TEBR1_BANK_Pos 24U /*!< ERRBNK TEBR1: BANK Position */ +#define ERRBNK_TEBR1_BANK_Msk (0x3UL << ERRBNK_TEBR1_BANK_Pos) /*!< ERRBNK TEBR1: BANK Mask */ + +#define ERRBNK_TEBR1_LOCATION_Pos 2U /*!< ERRBNK TEBR1: LOCATION Position */ +#define ERRBNK_TEBR1_LOCATION_Msk (0x3FFFFFUL << ERRBNK_TEBR1_LOCATION_Pos) /*!< ERRBNK TEBR1: LOCATION Mask */ + +#define ERRBNK_TEBR1_LOCKED_Pos 1U /*!< ERRBNK TEBR1: LOCKED Position */ +#define ERRBNK_TEBR1_LOCKED_Msk (0x1UL << ERRBNK_TEBR1_LOCKED_Pos) /*!< ERRBNK TEBR1: LOCKED Mask */ + +#define ERRBNK_TEBR1_VALID_Pos 0U /*!< ERRBNK TEBR1: VALID Position */ +#define ERRBNK_TEBR1_VALID_Msk (0x1UL << /*ERRBNK_TEBR1_VALID_Pos*/) /*!< ERRBNK TEBR1: VALID Mask */ + +/*@}*/ /* end of group ErrBnk_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup PrcCfgInf_Type Processor Configuration Information Registers (IMPLEMENTATION DEFINED) + \brief Type definitions for the Processor Configuration Information Registerss (PRCCFGINF) + @{ + */ + +/** + \brief Structure type to access the Processor Configuration Information Registerss (PRCCFGINF). + */ +typedef struct +{ + __OM uint32_t CFGINFOSEL; /*!< Offset: 0x000 ( /W) Processor Configuration Information Selection Register */ + __IM uint32_t CFGINFORD; /*!< Offset: 0x004 (R/ ) Processor Configuration Information Read Data Register */ +} PrcCfgInf_Type; + +/* PRCCFGINF Processor Configuration Information Selection Register (CFGINFOSEL) Definitions */ + +/* PRCCFGINF Processor Configuration Information Read Data Register (CFGINFORD) Definitions */ + +/*@}*/ /* end of group PrcCfgInf_Type */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[3]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE4 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE8 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFEC (R/W) PMU Peripheral Identification Register 3 */ + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (0xFFFFUL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (0xFFFFUL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (0xFFUL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (0x3FUL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/** \brief PMU Authentication Status Register Definitions */ + +#define PMU_AUTHSTATUS_NSID_Pos 0U /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSID_Msk (0x3UL /*<< PMU_AUTHSTATUS_NSID_Pos*/) /*!< PMU AUTHSTATUS: Non-secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSNID_Pos 2U /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSNID_Msk (0x3UL << PMU_AUTHSTATUS_NSNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SID_Pos 4U /*!< PMU AUTHSTATUS: Secure Invasive Debug Position */ +#define PMU_AUTHSTATUS_SID_Msk (0x3UL << PMU_AUTHSTATUS_SID_Pos) /*!< PMU AUTHSTATUS: Secure Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SNID_Pos 6U /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SNID_Msk (0x3UL << PMU_AUTHSTATUS_SNID_Pos) /*!< PMU AUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUID_Pos 16U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUID_Msk (0x3UL << PMU_AUTHSTATUS_NSUID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_NSUNID_Pos 18U /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_NSUNID_Msk (0x3UL << PMU_AUTHSTATUS_NSUNID_Pos) /*!< PMU AUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUID_Pos 20U /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Position */ +#define PMU_AUTHSTATUS_SUID_Msk (0x3UL << PMU_AUTHSTATUS_SUID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Invasive Debug Mask */ + +#define PMU_AUTHSTATUS_SUNID_Pos 22U /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Position */ +#define PMU_AUTHSTATUS_SUNID_Msk (0x3UL << PMU_AUTHSTATUS_SUNID_Pos) /*!< PMU AUTHSTATUS: Secure Unprivileged Non-invasive Debug Mask */ + + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define MEMSYSCTL_BASE (0xE001E000UL) /*!< Memory System Control Base Address */ + #define ERRBNK_BASE (0xE001E100UL) /*!< Error Banking Base Address */ + #define PWRMODCTL_BASE (0xE001E300UL) /*!< Power Mode Control Base Address */ + #define EWIC_BASE (0xE001E400UL) /*!< External Wakeup Interrupt Controller Base Address */ + #define PRCCFGINF_BASE (0xE001E700UL) /*!< Processor Configuration Information Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define ICB ((ICB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define MEMSYSCTL ((MemSysCtl_Type *) MEMSYSCTL_BASE ) /*!< Memory System Control configuration struct */ + #define ERRBNK ((ErrBnk_Type *) ERRBNK_BASE ) /*!< Error Banking configuration struct */ + #define PWRMODCTL ((PwrModCtl_Type *) PWRMODCTL_BASE ) /*!< Power Mode Control configuration struct */ + #define EWIC ((EWIC_Type *) EWIC_BASE ) /*!< EWIC configuration struct */ + #define PRCCFGINF ((PrcCfgInf_Type *) PRCCFGINF_BASE ) /*!< Processor Configuration Information configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define ICB_NS ((ICB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_register_aliases Backwards Compatibility Aliases + \brief Register alias definitions for backwards compatibility. + @{ + */ + +/*@} */ + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +/** + \brief Cortex-M85 PMU events + \note Architectural PMU events can be found in pmu_armv8.h +*/ + +#define ARMCM85_PMU_ECC_ERR 0xC000 /*!< One or more Error Correcting Code (ECC) errors detected */ +#define ARMCM85_PMU_ECC_ERR_MBIT 0xC001 /*!< One or more multi-bit ECC errors detected */ +#define ARMCM85_PMU_ECC_ERR_DCACHE 0xC010 /*!< One or more ECC errors in the data cache */ +#define ARMCM85_PMU_ECC_ERR_ICACHE 0xC011 /*!< One or more ECC errors in the instruction cache */ +#define ARMCM85_PMU_ECC_ERR_MBIT_DCACHE 0xC012 /*!< One or more multi-bit ECC errors in the data cache */ +#define ARMCM85_PMU_ECC_ERR_MBIT_ICACHE 0xC013 /*!< One or more multi-bit ECC errors in the instruction cache */ +#define ARMCM85_PMU_ECC_ERR_DTCM 0xC020 /*!< One or more ECC errors in the Data Tightly Coupled Memory (DTCM) */ +#define ARMCM85_PMU_ECC_ERR_ITCM 0xC021 /*!< One or more ECC errors in the Instruction Tightly Coupled Memory (ITCM) */ +#define ARMCM85_PMU_ECC_ERR_MBIT_DTCM 0xC022 /*!< One or more multi-bit ECC errors in the DTCM */ +#define ARMCM85_PMU_ECC_ERR_MBIT_ITCM 0xC023 /*!< One or more multi-bit ECC errors in the ITCM */ +#define ARMCM85_PMU_PF_LINEFILL 0xC100 /*!< The prefetcher starts a line-fill */ +#define ARMCM85_PMU_PF_CANCEL 0xC101 /*!< The prefetcher stops prefetching */ +#define ARMCM85_PMU_PF_DROP_LINEFILL 0xC102 /*!< A linefill triggered by a prefetcher has been dropped because of lack of buffering */ +#define ARMCM85_PMU_NWAMODE_ENTER 0xC200 /*!< No write-allocate mode entry */ +#define ARMCM85_PMU_NWAMODE 0xC201 /*!< Write-allocate store is not allocated into the data cache due to no-write-allocate mode */ +#define ARMCM85_PMU_SAHB_ACCESS 0xC300 /*!< Read or write access on the S-AHB interface to the TCM */ +#define ARMCM85_PMU_PAHB_ACCESS 0xC301 /*!< Read or write access on the P-AHB write interface */ +#define ARMCM85_PMU_AXI_WRITE_ACCESS 0xC302 /*!< Any beat access to M-AXI write interface */ +#define ARMCM85_PMU_AXI_READ_ACCESS 0xC303 /*!< Any beat access to M-AXI read interface */ +#define ARMCM85_PMU_DOSTIMEOUT_DOUBLE 0xC400 /*!< Denial of Service timeout has fired twice and caused buffers to drain to allow forward progress */ +#define ARMCM85_PMU_DOSTIMEOUT_TRIPLE 0xC401 /*!< Denial of Service timeout has fired three times and blocked the LSU to force forward progress */ + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + +/* ################### PAC Key functions ########################### */ + +#if (defined (__ARM_FEATURE_PAUTH) && (__ARM_FEATURE_PAUTH == 1)) +#include "pac_armv81.h" +#endif + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM85_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_sc000.h b/Libraries/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..dbc755f --- /dev/null +++ b/Libraries/CMSIS/Include/core_sc000.h @@ -0,0 +1,1030 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_sc300.h b/Libraries/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..d666210 --- /dev/null +++ b/Libraries/CMSIS/Include/core_sc300.h @@ -0,0 +1,1917 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.10 + * @date 04. June 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/core_starmc1.h b/Libraries/CMSIS/Include/core_starmc1.h new file mode 100644 index 0000000..d86c8d3 --- /dev/null +++ b/Libraries/CMSIS/Include/core_starmc1.h @@ -0,0 +1,3592 @@ +/**************************************************************************//** + * @file core_starmc1.h + * @brief CMSIS ArmChina STAR-MC1 Core Peripheral Access Layer Header File + * @version V1.0.2 + * @date 07. April 2022 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. + * Copyright (c) 2018-2022 Arm China. + * All rights reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_STAR_H_GENERIC +#define __CORE_STAR_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup STAR-MC1 + @{ + */ + +#include "cmsis_version.h" + +/* Macro Define for STAR-MC1 */ +#define __STAR_MC (1U) /*!< STAR-MC Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_STAR_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_STAR_H_DEPENDANT +#define __CORE_STAR_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __STAR_REV + #define __STAR_REV 0x0000U + #warning "__STAR_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group STAR-MC1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for STAR-MC1 processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED_ADD1[21U]; + __IOM uint32_t SFSR; /*!< Offset: 0x0E4 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x0E8 (R/W) Secure Fault Address Register */ + uint32_t RESERVED3[69U]; + __OM uint32_t STIR; /*!< Offset: F00-D00=0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +typedef struct +{ + __IOM uint32_t CACR; /*!< Offset: 0x0 (R/W) L1 Cache Control Register */ + __IOM uint32_t ITCMCR; /*!< Offset: 0x10 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x14 (R/W) Data Tightly-Coupled Memory Control Registers */ +}EMSS_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +#define SCB_CLIDR_IC_Pos 0U /*!< SCB CLIDR: IC Position */ +#define SCB_CLIDR_IC_Msk (1UL << SCB_CLIDR_IC_Pos) /*!< SCB CLIDR: IC Mask */ + +#define SCB_CLIDR_DC_Pos 1U /*!< SCB CLIDR: DC Position */ +#define SCB_CLIDR_DC_Msk (1UL << SCB_CLIDR_DC_Pos) /*!< SCB CLIDR: DC Mask */ + + + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache line Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_LEVEL_Pos 1U /*!< SCB DCISW: Level Position */ +#define SCB_DCISW_LEVEL_Msk (7UL << SCB_DCISW_LEVEL_Pos) /*!< SCB DCISW: Level Mask */ + +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0xFFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean line by Set-way Register Definitions */ +#define SCB_DCCSW_LEVEL_Pos 1U /*!< SCB DCCSW: Level Position */ +#define SCB_DCCSW_LEVEL_Msk (7UL << SCB_DCCSW_LEVEL_Pos) /*!< SCB DCCSW: Level Mask */ + +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0xFFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_LEVEL_Pos 1U /*!< SCB DCCISW: Level Position */ +#define SCB_DCCISW_LEVEL_Msk (7UL << SCB_DCCISW_LEVEL_Pos) /*!< SCB DCCISW: Level Mask */ + +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0xFFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* ArmChina: Implementation Defined */ +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_DCCLEAN_Pos 16U /*!< SCB CACR: DCCLEAN Position */ +#define SCB_CACR_DCCLEAN_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: DCCLEAN Mask */ + +#define SCB_CACR_ICACTIVE_Pos 13U /*!< SCB CACR: ICACTIVE Position */ +#define SCB_CACR_ICACTIVE_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: ICACTIVE Mask */ + +#define SCB_CACR_DCACTIVE_Pos 12U /*!< SCB CACR: DCACTIVE Position */ +#define SCB_CACR_DCACTIVE_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: DCACTIVE Mask */ + +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define EMSS_BASE (0xE001E000UL) /*!AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses including + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/** + \brief Software Reset + \details Initiates a system reset request to reset the CPU. + */ +__NO_RETURN __STATIC_INLINE void __SW_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses including + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_BFHFNMINS_Msk) | /* Keep BFHFNMINS unchanged. Use this Reset function in case your case need to keep it */ + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | /* Keep priority group unchanged */ + SCB_AIRCR_SYSRESETREQ_Msk ); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< STAR-MC1 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< STAR-MC1 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ +#endif + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_STAR_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Libraries/CMSIS/Include/mpu_armv7.h b/Libraries/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..d9eedf8 --- /dev/null +++ b/Libraries/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,275 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.2 + * @date 25. May 2020 + ******************************************************************************/ +/* + * Copyright (c) 2017-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) >> 1U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rasr Value for RASR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rasr Value for RASR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_Load(). +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/Libraries/CMSIS/Include/mpu_armv8.h b/Libraries/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..3de16ef --- /dev/null +++ b/Libraries/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,352 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.3 + * @date 03. February 2021 + ******************************************************************************/ +/* + * Copyright (c) 2017-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + ((((NT) & 1U) << 3U) | (((WB) & 1U) << 2U) | (((RA) & 1U) << 1U) | ((WA) & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) ((((O) & 0xFU) << 4U) | ((((O) & 0xFU) != 0U) ? ((I) & 0xFU) : (((I) & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) ((((RO) & 1U) << 1U) | ((NP) & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + (((BASE) & MPU_RBAR_BASE_Msk) | \ + (((SH) << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + (((XN) << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((PXN) << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + __DMB(); + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_LoadEx() +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/Libraries/CMSIS/Include/pac_armv81.h b/Libraries/CMSIS/Include/pac_armv81.h new file mode 100644 index 0000000..854b60a --- /dev/null +++ b/Libraries/CMSIS/Include/pac_armv81.h @@ -0,0 +1,206 @@ +/****************************************************************************** + * @file pac_armv81.h + * @brief CMSIS PAC key functions for Armv8.1-M PAC extension + * @version V1.0.0 + * @date 23. March 2022 + ******************************************************************************/ +/* + * Copyright (c) 2022 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef PAC_ARMV81_H +#define PAC_ARMV81_H + + +/* ################### PAC Key functions ########################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_PacKeyFunctions PAC Key functions + \brief Functions that access the PAC keys. + @{ + */ + +#if (defined (__ARM_FEATURE_PAUTH) && (__ARM_FEATURE_PAUTH == 1)) + +/** + \brief read the PAC key used for privileged mode + \details Reads the PAC key stored in the PAC_KEY_P registers. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __get_PAC_KEY_P (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_p_0\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_p_1\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_p_2\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_p_3\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for privileged mode + \details writes the given PAC key to the PAC_KEY_P registers. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __set_PAC_KEY_P (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_p_0, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_p_1, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_p_2, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_p_3, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief read the PAC key used for unprivileged mode + \details Reads the PAC key stored in the PAC_KEY_U registers. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __get_PAC_KEY_U (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_u_0\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_u_1\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_u_2\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_u_3\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for unprivileged mode + \details writes the given PAC key to the PAC_KEY_U registers. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __set_PAC_KEY_U (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_u_0, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_u_1, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_u_2, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_u_3, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) + +/** + \brief read the PAC key used for privileged mode (non-secure) + \details Reads the PAC key stored in the non-secure PAC_KEY_P registers when in secure mode. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_get_PAC_KEY_P_NS (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_p_0_ns\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_p_1_ns\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_p_2_ns\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_p_3_ns\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for privileged mode (non-secure) + \details writes the given PAC key to the non-secure PAC_KEY_P registers when in secure mode. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_set_PAC_KEY_P_NS (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_p_0_ns, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_p_1_ns, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_p_2_ns, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_p_3_ns, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief read the PAC key used for unprivileged mode (non-secure) + \details Reads the PAC key stored in the non-secure PAC_KEY_U registers when in secure mode. + \param [out] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_get_PAC_KEY_U_NS (uint32_t* pPacKey) { + __ASM volatile ( + "mrs r1, pac_key_u_0_ns\n" + "str r1,[%0,#0]\n" + "mrs r1, pac_key_u_1_ns\n" + "str r1,[%0,#4]\n" + "mrs r1, pac_key_u_2_ns\n" + "str r1,[%0,#8]\n" + "mrs r1, pac_key_u_3_ns\n" + "str r1,[%0,#12]\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +/** + \brief write the PAC key used for unprivileged mode (non-secure) + \details writes the given PAC key to the non-secure PAC_KEY_U registers when in secure mode. + \param [in] pPacKey 128bit PAC key + */ +__STATIC_FORCEINLINE void __TZ_set_PAC_KEY_U_NS (uint32_t* pPacKey) { + __ASM volatile ( + "ldr r1,[%0,#0]\n" + "msr pac_key_u_0_ns, r1\n" + "ldr r1,[%0,#4]\n" + "msr pac_key_u_1_ns, r1\n" + "ldr r1,[%0,#8]\n" + "msr pac_key_u_2_ns, r1\n" + "ldr r1,[%0,#12]\n" + "msr pac_key_u_3_ns, r1\n" + : : "r" (pPacKey) : "memory", "r1" + ); +} + +#endif /* (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) */ + +#endif /* (defined (__ARM_FEATURE_PAUTH) && (__ARM_FEATURE_PAUTH == 1)) */ + +/*@} end of CMSIS_Core_PacKeyFunctions */ + + +#endif /* PAC_ARMV81_H */ diff --git a/Libraries/CMSIS/Include/pmu_armv8.h b/Libraries/CMSIS/Include/pmu_armv8.h new file mode 100644 index 0000000..f8f3d89 --- /dev/null +++ b/Libraries/CMSIS/Include/pmu_armv8.h @@ -0,0 +1,337 @@ +/****************************************************************************** + * @file pmu_armv8.h + * @brief CMSIS PMU API for Armv8.1-M PMU + * @version V1.0.1 + * @date 15. April 2020 + ******************************************************************************/ +/* + * Copyright (c) 2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_PMU_ARMV8_H +#define ARM_PMU_ARMV8_H + +/** + * \brief PMU Events + * \note See the Armv8.1-M Architecture Reference Manual for full details on these PMU events. + * */ + +#define ARM_PMU_SW_INCR 0x0000 /*!< Software update to the PMU_SWINC register, architecturally executed and condition code check pass */ +#define ARM_PMU_L1I_CACHE_REFILL 0x0001 /*!< L1 I-Cache refill */ +#define ARM_PMU_L1D_CACHE_REFILL 0x0003 /*!< L1 D-Cache refill */ +#define ARM_PMU_L1D_CACHE 0x0004 /*!< L1 D-Cache access */ +#define ARM_PMU_LD_RETIRED 0x0006 /*!< Memory-reading instruction architecturally executed and condition code check pass */ +#define ARM_PMU_ST_RETIRED 0x0007 /*!< Memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_INST_RETIRED 0x0008 /*!< Instruction architecturally executed */ +#define ARM_PMU_EXC_TAKEN 0x0009 /*!< Exception entry */ +#define ARM_PMU_EXC_RETURN 0x000A /*!< Exception return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_PC_WRITE_RETIRED 0x000C /*!< Software change to the Program Counter (PC). Instruction is architecturally executed and condition code check pass */ +#define ARM_PMU_BR_IMMED_RETIRED 0x000D /*!< Immediate branch architecturally executed */ +#define ARM_PMU_BR_RETURN_RETIRED 0x000E /*!< Function return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_UNALIGNED_LDST_RETIRED 0x000F /*!< Unaligned memory memory-reading or memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BR_MIS_PRED 0x0010 /*!< Mispredicted or not predicted branch speculatively executed */ +#define ARM_PMU_CPU_CYCLES 0x0011 /*!< Cycle */ +#define ARM_PMU_BR_PRED 0x0012 /*!< Predictable branch speculatively executed */ +#define ARM_PMU_MEM_ACCESS 0x0013 /*!< Data memory access */ +#define ARM_PMU_L1I_CACHE 0x0014 /*!< Level 1 instruction cache access */ +#define ARM_PMU_L1D_CACHE_WB 0x0015 /*!< Level 1 data cache write-back */ +#define ARM_PMU_L2D_CACHE 0x0016 /*!< Level 2 data cache access */ +#define ARM_PMU_L2D_CACHE_REFILL 0x0017 /*!< Level 2 data cache refill */ +#define ARM_PMU_L2D_CACHE_WB 0x0018 /*!< Level 2 data cache write-back */ +#define ARM_PMU_BUS_ACCESS 0x0019 /*!< Bus access */ +#define ARM_PMU_MEMORY_ERROR 0x001A /*!< Local memory error */ +#define ARM_PMU_INST_SPEC 0x001B /*!< Instruction speculatively executed */ +#define ARM_PMU_BUS_CYCLES 0x001D /*!< Bus cycles */ +#define ARM_PMU_CHAIN 0x001E /*!< For an odd numbered counter, increment when an overflow occurs on the preceding even-numbered counter on the same PE */ +#define ARM_PMU_L1D_CACHE_ALLOCATE 0x001F /*!< Level 1 data cache allocation without refill */ +#define ARM_PMU_L2D_CACHE_ALLOCATE 0x0020 /*!< Level 2 data cache allocation without refill */ +#define ARM_PMU_BR_RETIRED 0x0021 /*!< Branch instruction architecturally executed */ +#define ARM_PMU_BR_MIS_PRED_RETIRED 0x0022 /*!< Mispredicted branch instruction architecturally executed */ +#define ARM_PMU_STALL_FRONTEND 0x0023 /*!< No operation issued because of the frontend */ +#define ARM_PMU_STALL_BACKEND 0x0024 /*!< No operation issued because of the backend */ +#define ARM_PMU_L2I_CACHE 0x0027 /*!< Level 2 instruction cache access */ +#define ARM_PMU_L2I_CACHE_REFILL 0x0028 /*!< Level 2 instruction cache refill */ +#define ARM_PMU_L3D_CACHE_ALLOCATE 0x0029 /*!< Level 3 data cache allocation without refill */ +#define ARM_PMU_L3D_CACHE_REFILL 0x002A /*!< Level 3 data cache refill */ +#define ARM_PMU_L3D_CACHE 0x002B /*!< Level 3 data cache access */ +#define ARM_PMU_L3D_CACHE_WB 0x002C /*!< Level 3 data cache write-back */ +#define ARM_PMU_LL_CACHE_RD 0x0036 /*!< Last level data cache read */ +#define ARM_PMU_LL_CACHE_MISS_RD 0x0037 /*!< Last level data cache read miss */ +#define ARM_PMU_L1D_CACHE_MISS_RD 0x0039 /*!< Level 1 data cache read miss */ +#define ARM_PMU_OP_COMPLETE 0x003A /*!< Operation retired */ +#define ARM_PMU_OP_SPEC 0x003B /*!< Operation speculatively executed */ +#define ARM_PMU_STALL 0x003C /*!< Stall cycle for instruction or operation not sent for execution */ +#define ARM_PMU_STALL_OP_BACKEND 0x003D /*!< Stall cycle for instruction or operation not sent for execution due to pipeline backend */ +#define ARM_PMU_STALL_OP_FRONTEND 0x003E /*!< Stall cycle for instruction or operation not sent for execution due to pipeline frontend */ +#define ARM_PMU_STALL_OP 0x003F /*!< Instruction or operation slots not occupied each cycle */ +#define ARM_PMU_L1D_CACHE_RD 0x0040 /*!< Level 1 data cache read */ +#define ARM_PMU_LE_RETIRED 0x0100 /*!< Loop end instruction executed */ +#define ARM_PMU_LE_SPEC 0x0101 /*!< Loop end instruction speculatively executed */ +#define ARM_PMU_BF_RETIRED 0x0104 /*!< Branch future instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BF_SPEC 0x0105 /*!< Branch future instruction speculatively executed and condition code check pass */ +#define ARM_PMU_LE_CANCEL 0x0108 /*!< Loop end instruction not taken */ +#define ARM_PMU_BF_CANCEL 0x0109 /*!< Branch future instruction not taken */ +#define ARM_PMU_SE_CALL_S 0x0114 /*!< Call to secure function, resulting in Security state change */ +#define ARM_PMU_SE_CALL_NS 0x0115 /*!< Call to non-secure function, resulting in Security state change */ +#define ARM_PMU_DWT_CMPMATCH0 0x0118 /*!< DWT comparator 0 match */ +#define ARM_PMU_DWT_CMPMATCH1 0x0119 /*!< DWT comparator 1 match */ +#define ARM_PMU_DWT_CMPMATCH2 0x011A /*!< DWT comparator 2 match */ +#define ARM_PMU_DWT_CMPMATCH3 0x011B /*!< DWT comparator 3 match */ +#define ARM_PMU_MVE_INST_RETIRED 0x0200 /*!< MVE instruction architecturally executed */ +#define ARM_PMU_MVE_INST_SPEC 0x0201 /*!< MVE instruction speculatively executed */ +#define ARM_PMU_MVE_FP_RETIRED 0x0204 /*!< MVE floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SPEC 0x0205 /*!< MVE floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_HP_RETIRED 0x0208 /*!< MVE half-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_HP_SPEC 0x0209 /*!< MVE half-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_SP_RETIRED 0x020C /*!< MVE single-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SP_SPEC 0x020D /*!< MVE single-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_MAC_RETIRED 0x0214 /*!< MVE floating-point multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_FP_MAC_SPEC 0x0215 /*!< MVE floating-point multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_INT_RETIRED 0x0224 /*!< MVE integer instruction architecturally executed */ +#define ARM_PMU_MVE_INT_SPEC 0x0225 /*!< MVE integer instruction speculatively executed */ +#define ARM_PMU_MVE_INT_MAC_RETIRED 0x0228 /*!< MVE multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_INT_MAC_SPEC 0x0229 /*!< MVE multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_RETIRED 0x0238 /*!< MVE load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_SPEC 0x0239 /*!< MVE load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_RETIRED 0x023C /*!< MVE load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_SPEC 0x023D /*!< MVE load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_RETIRED 0x0240 /*!< MVE store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_SPEC 0x0241 /*!< MVE store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_CONTIG_RETIRED 0x0244 /*!< MVE contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_CONTIG_SPEC 0x0245 /*!< MVE contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_CONTIG_RETIRED 0x0248 /*!< MVE contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_CONTIG_SPEC 0x0249 /*!< MVE contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_CONTIG_RETIRED 0x024C /*!< MVE contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_CONTIG_SPEC 0x024D /*!< MVE contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_RETIRED 0x0250 /*!< MVE non-contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_SPEC 0x0251 /*!< MVE non-contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_RETIRED 0x0254 /*!< MVE non-contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_SPEC 0x0255 /*!< MVE non-contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_RETIRED 0x0258 /*!< MVE non-contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_SPEC 0x0259 /*!< MVE non-contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_MULTI_RETIRED 0x025C /*!< MVE memory instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LDST_MULTI_SPEC 0x025D /*!< MVE memory instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LD_MULTI_RETIRED 0x0260 /*!< MVE memory load instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LD_MULTI_SPEC 0x0261 /*!< MVE memory load instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_ST_MULTI_RETIRED 0x0261 /*!< MVE memory store instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_ST_MULTI_SPEC 0x0265 /*!< MVE memory store instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_RETIRED 0x028C /*!< MVE unaligned memory load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_SPEC 0x028D /*!< MVE unaligned memory load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_RETIRED 0x0290 /*!< MVE unaligned load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_SPEC 0x0291 /*!< MVE unaligned load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_RETIRED 0x0294 /*!< MVE unaligned store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_SPEC 0x0295 /*!< MVE unaligned store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_RETIRED 0x0298 /*!< MVE unaligned noncontiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_SPEC 0x0299 /*!< MVE unaligned noncontiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_RETIRED 0x02A0 /*!< MVE vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_SPEC 0x02A1 /*!< MVE vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_FP_RETIRED 0x02A4 /*!< MVE floating-point vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_FP_SPEC 0x02A5 /*!< MVE floating-point vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_INT_RETIRED 0x02A8 /*!< MVE integer vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_INT_SPEC 0x02A9 /*!< MVE integer vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_PRED 0x02B8 /*!< Cycles where one or more predicated beats architecturally executed */ +#define ARM_PMU_MVE_STALL 0x02CC /*!< Stall cycles caused by an MVE instruction */ +#define ARM_PMU_MVE_STALL_RESOURCE 0x02CD /*!< Stall cycles caused by an MVE instruction because of resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_MEM 0x02CE /*!< Stall cycles caused by an MVE instruction because of memory resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_FP 0x02CF /*!< Stall cycles caused by an MVE instruction because of floating-point resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_INT 0x02D0 /*!< Stall cycles caused by an MVE instruction because of integer resource conflicts */ +#define ARM_PMU_MVE_STALL_BREAK 0x02D3 /*!< Stall cycles caused by an MVE chain break */ +#define ARM_PMU_MVE_STALL_DEPENDENCY 0x02D4 /*!< Stall cycles caused by MVE register dependency */ +#define ARM_PMU_ITCM_ACCESS 0x4007 /*!< Instruction TCM access */ +#define ARM_PMU_DTCM_ACCESS 0x4008 /*!< Data TCM access */ +#define ARM_PMU_TRCEXTOUT0 0x4010 /*!< ETM external output 0 */ +#define ARM_PMU_TRCEXTOUT1 0x4011 /*!< ETM external output 1 */ +#define ARM_PMU_TRCEXTOUT2 0x4012 /*!< ETM external output 2 */ +#define ARM_PMU_TRCEXTOUT3 0x4013 /*!< ETM external output 3 */ +#define ARM_PMU_CTI_TRIGOUT4 0x4018 /*!< Cross-trigger Interface output trigger 4 */ +#define ARM_PMU_CTI_TRIGOUT5 0x4019 /*!< Cross-trigger Interface output trigger 5 */ +#define ARM_PMU_CTI_TRIGOUT6 0x401A /*!< Cross-trigger Interface output trigger 6 */ +#define ARM_PMU_CTI_TRIGOUT7 0x401B /*!< Cross-trigger Interface output trigger 7 */ + +/** \brief PMU Functions */ + +__STATIC_INLINE void ARM_PMU_Enable(void); +__STATIC_INLINE void ARM_PMU_Disable(void); + +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type); + +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void); +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void); + +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void); +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void); +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask); + +/** + \brief Enable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Enable(void) +{ + PMU->CTRL |= PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Disable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Disable(void) +{ + PMU->CTRL &= ~PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Set event to count for PMU eventer counter + \param [in] num Event counter (0-30) to configure + \param [in] type Event to count +*/ +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type) +{ + PMU->EVTYPER[num] = type; +} + +/** + \brief Reset cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_CYCCNT_RESET_Msk; +} + +/** + \brief Reset all event counters +*/ +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_EVENTCNT_RESET_Msk; +} + +/** + \brief Enable counters + \param [in] mask Counters to enable + \note Enables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask) +{ + PMU->CNTENSET = mask; +} + +/** + \brief Disable counters + \param [in] mask Counters to enable + \note Disables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask) +{ + PMU->CNTENCLR = mask; +} + +/** + \brief Read cycle counter + \return Cycle count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void) +{ + return PMU->CCNTR; +} + +/** + \brief Read event counter + \param [in] num Event counter (0-30) to read + \return Event count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num) +{ + return PMU_EVCNTR_CNT_Msk & PMU->EVCNTR[num]; +} + +/** + \brief Read counter overflow status + \return Counter overflow status bits for the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void) +{ + return PMU->OVSSET; +} + +/** + \brief Clear counter overflow status + \param [in] mask Counter overflow status bits to clear + \note Clears overflow status bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask) +{ + PMU->OVSCLR = mask; +} + +/** + \brief Enable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to set + \note Sets overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask) +{ + PMU->INTENSET = mask; +} + +/** + \brief Disable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to clear + \note Clears overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask) +{ + PMU->INTENCLR = mask; +} + +/** + \brief Software increment event counter + \param [in] mask Counters to increment + \note Software increment bits for one or more event counters (0-30) +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask) +{ + PMU->SWINC = mask; +} + +#endif diff --git a/Libraries/CMSIS/Include/tz_context.h b/Libraries/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..0d09749 --- /dev/null +++ b/Libraries/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_adc.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_adc.h new file mode 100644 index 0000000..64a744e --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_adc.h @@ -0,0 +1,442 @@ +/** + ****************************************************************************** + * @file stm32f0xx_adc.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the ADC firmware + * library + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_ADC_H +#define __STM32F0XX_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief ADC Init structure definition + */ + +typedef struct +{ + uint32_t ADC_Resolution; /*!< Selects the resolution of the conversion. + This parameter can be a value of @ref ADC_Resolution */ + + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConvEdge; /*!< Selects the external trigger Edge and enables the + trigger of a regular group. This parameter can be a value + of @ref ADC_external_trigger_edge_conversion */ + + uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_channels_conversion */ + + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint32_t ADC_ScanDirection; /*!< Specifies in which direction the channels will be scanned + in the sequence. + This parameter can be a value of @ref ADC_Scan_Direction */ +}ADC_InitTypeDef; + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants + * @{ + */ +#define IS_ADC_ALL_PERIPH(PERIPH) ((PERIPH) == ADC1) + +/** @defgroup ADC_JitterOff + * @{ + */ +/* These defines are obsolete and maintained for legacy purpose only. They are replaced by the ADC_ClockMode */ +#define ADC_JitterOff_PCLKDiv2 ADC_CFGR2_JITOFFDIV2 +#define ADC_JitterOff_PCLKDiv4 ADC_CFGR2_JITOFFDIV4 + +#define IS_ADC_JITTEROFF(JITTEROFF) (((JITTEROFF) & 0x3FFFFFFF) == (uint32_t)RESET) + +/** + * @} + */ + +/** @defgroup ADC_ClockMode + * @{ + */ +#define ADC_ClockMode_AsynClk ((uint32_t)0x00000000) /*!< ADC Asynchronous clock mode */ +#define ADC_ClockMode_SynClkDiv2 ADC_CFGR2_CKMODE_0 /*!< Synchronous clock mode divided by 2 */ +#define ADC_ClockMode_SynClkDiv4 ADC_CFGR2_CKMODE_1 /*!< Synchronous clock mode divided by 4 */ +#define IS_ADC_CLOCKMODE(CLOCK) (((CLOCK) == ADC_ClockMode_AsynClk) ||\ + ((CLOCK) == ADC_ClockMode_SynClkDiv2) ||\ + ((CLOCK) == ADC_ClockMode_SynClkDiv4)) + +/** + * @} + */ + +/** @defgroup ADC_Resolution + * @{ + */ +#define ADC_Resolution_12b ((uint32_t)0x00000000) +#define ADC_Resolution_10b ADC_CFGR1_RES_0 +#define ADC_Resolution_8b ADC_CFGR1_RES_1 +#define ADC_Resolution_6b ADC_CFGR1_RES + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_Resolution_12b) || \ + ((RESOLUTION) == ADC_Resolution_10b) || \ + ((RESOLUTION) == ADC_Resolution_8b) || \ + ((RESOLUTION) == ADC_Resolution_6b)) + +/** + * @} + */ + +/** @defgroup ADC_external_trigger_edge_conversion + * @{ + */ +#define ADC_ExternalTrigConvEdge_None ((uint32_t)0x00000000) +#define ADC_ExternalTrigConvEdge_Rising ADC_CFGR1_EXTEN_0 +#define ADC_ExternalTrigConvEdge_Falling ADC_CFGR1_EXTEN_1 +#define ADC_ExternalTrigConvEdge_RisingFalling ADC_CFGR1_EXTEN + +#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigConvEdge_None) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_Rising) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_Falling) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_RisingFalling)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_channels_conversion + * @{ + */ + +/* TIM1 */ +#define ADC_ExternalTrigConv_T1_TRGO ((uint32_t)0x00000000) +#define ADC_ExternalTrigConv_T1_CC4 ADC_CFGR1_EXTSEL_0 + +/* TIM2 */ +#define ADC_ExternalTrigConv_T2_TRGO ADC_CFGR1_EXTSEL_1 + +/* TIM3 */ +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)(ADC_CFGR1_EXTSEL_0 | ADC_CFGR1_EXTSEL_1)) + +/* TIM15 */ +#define ADC_ExternalTrigConv_T15_TRGO ADC_CFGR1_EXTSEL_2 + +#define IS_ADC_EXTERNAL_TRIG_CONV(CONV) (((CONV) == ADC_ExternalTrigConv_T1_TRGO) || \ + ((CONV) == ADC_ExternalTrigConv_T1_CC4) || \ + ((CONV) == ADC_ExternalTrigConv_T2_TRGO) || \ + ((CONV) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((CONV) == ADC_ExternalTrigConv_T15_TRGO)) +/** + * @} + */ + +/** @defgroup ADC_data_align + * @{ + */ + +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ADC_CFGR1_ALIGN + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + +/** @defgroup ADC_Scan_Direction + * @{ + */ + +#define ADC_ScanDirection_Upward ((uint32_t)0x00000000) +#define ADC_ScanDirection_Backward ADC_CFGR1_SCANDIR + +#define IS_ADC_SCAN_DIRECTION(DIRECTION) (((DIRECTION) == ADC_ScanDirection_Upward) || \ + ((DIRECTION) == ADC_ScanDirection_Backward)) +/** + * @} + */ + +/** @defgroup ADC_DMA_Mode + * @{ + */ + +#define ADC_DMAMode_OneShot ((uint32_t)0x00000000) +#define ADC_DMAMode_Circular ADC_CFGR1_DMACFG + +#define IS_ADC_DMA_MODE(MODE) (((MODE) == ADC_DMAMode_OneShot) || \ + ((MODE) == ADC_DMAMode_Circular)) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ + +#define ADC_AnalogWatchdog_Channel_0 ((uint32_t)0x00000000) +#define ADC_AnalogWatchdog_Channel_1 ((uint32_t)0x04000000) +#define ADC_AnalogWatchdog_Channel_2 ((uint32_t)0x08000000) +#define ADC_AnalogWatchdog_Channel_3 ((uint32_t)0x0C000000) +#define ADC_AnalogWatchdog_Channel_4 ((uint32_t)0x10000000) +#define ADC_AnalogWatchdog_Channel_5 ((uint32_t)0x14000000) +#define ADC_AnalogWatchdog_Channel_6 ((uint32_t)0x18000000) +#define ADC_AnalogWatchdog_Channel_7 ((uint32_t)0x1C000000) +#define ADC_AnalogWatchdog_Channel_8 ((uint32_t)0x20000000) +#define ADC_AnalogWatchdog_Channel_9 ((uint32_t)0x24000000) +#define ADC_AnalogWatchdog_Channel_10 ((uint32_t)0x28000000) /*!< Not available for STM32F031 devices */ +#define ADC_AnalogWatchdog_Channel_11 ((uint32_t)0x2C000000) /*!< Not available for STM32F031 devices */ +#define ADC_AnalogWatchdog_Channel_12 ((uint32_t)0x30000000) /*!< Not available for STM32F031 devices */ +#define ADC_AnalogWatchdog_Channel_13 ((uint32_t)0x34000000) /*!< Not available for STM32F031 devices */ +#define ADC_AnalogWatchdog_Channel_14 ((uint32_t)0x38000000) /*!< Not available for STM32F031 devices */ +#define ADC_AnalogWatchdog_Channel_15 ((uint32_t)0x3C000000) /*!< Not available for STM32F031 devices */ +#define ADC_AnalogWatchdog_Channel_16 ((uint32_t)0x40000000) +#define ADC_AnalogWatchdog_Channel_17 ((uint32_t)0x44000000) +#define ADC_AnalogWatchdog_Channel_18 ((uint32_t)0x48000000) + + +#define IS_ADC_ANALOG_WATCHDOG_CHANNEL(CHANNEL) (((CHANNEL) == ADC_AnalogWatchdog_Channel_0) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_1) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_2) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_3) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_4) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_5) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_6) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_7) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_8) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_9) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_10) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_11) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_12) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_13) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_14) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_15) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_16) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_17) || \ + ((CHANNEL) == ADC_AnalogWatchdog_Channel_18)) +/** + * @} + */ + +/** @defgroup ADC_sampling_times + * @{ + */ + +#define ADC_SampleTime_1_5Cycles ((uint32_t)0x00000000) +#define ADC_SampleTime_7_5Cycles ((uint32_t)0x00000001) +#define ADC_SampleTime_13_5Cycles ((uint32_t)0x00000002) +#define ADC_SampleTime_28_5Cycles ((uint32_t)0x00000003) +#define ADC_SampleTime_41_5Cycles ((uint32_t)0x00000004) +#define ADC_SampleTime_55_5Cycles ((uint32_t)0x00000005) +#define ADC_SampleTime_71_5Cycles ((uint32_t)0x00000006) +#define ADC_SampleTime_239_5Cycles ((uint32_t)0x00000007) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1_5Cycles) || \ + ((TIME) == ADC_SampleTime_7_5Cycles) || \ + ((TIME) == ADC_SampleTime_13_5Cycles) || \ + ((TIME) == ADC_SampleTime_28_5Cycles) || \ + ((TIME) == ADC_SampleTime_41_5Cycles) || \ + ((TIME) == ADC_SampleTime_55_5Cycles) || \ + ((TIME) == ADC_SampleTime_71_5Cycles) || \ + ((TIME) == ADC_SampleTime_239_5Cycles)) +/** + * @} + */ + +/** @defgroup ADC_thresholds + * @{ + */ + +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_channels + * @{ + */ + +#define ADC_Channel_0 ADC_CHSELR_CHSEL0 +#define ADC_Channel_1 ADC_CHSELR_CHSEL1 +#define ADC_Channel_2 ADC_CHSELR_CHSEL2 +#define ADC_Channel_3 ADC_CHSELR_CHSEL3 +#define ADC_Channel_4 ADC_CHSELR_CHSEL4 +#define ADC_Channel_5 ADC_CHSELR_CHSEL5 +#define ADC_Channel_6 ADC_CHSELR_CHSEL6 +#define ADC_Channel_7 ADC_CHSELR_CHSEL7 +#define ADC_Channel_8 ADC_CHSELR_CHSEL8 +#define ADC_Channel_9 ADC_CHSELR_CHSEL9 +#define ADC_Channel_10 ADC_CHSELR_CHSEL10 /*!< Not available for STM32F031 devices */ +#define ADC_Channel_11 ADC_CHSELR_CHSEL11 /*!< Not available for STM32F031 devices */ +#define ADC_Channel_12 ADC_CHSELR_CHSEL12 /*!< Not available for STM32F031 devices */ +#define ADC_Channel_13 ADC_CHSELR_CHSEL13 /*!< Not available for STM32F031 devices */ +#define ADC_Channel_14 ADC_CHSELR_CHSEL14 /*!< Not available for STM32F031 devices */ +#define ADC_Channel_15 ADC_CHSELR_CHSEL15 /*!< Not available for STM32F031 devices */ +#define ADC_Channel_16 ADC_CHSELR_CHSEL16 +#define ADC_Channel_17 ADC_CHSELR_CHSEL17 +#define ADC_Channel_18 ADC_CHSELR_CHSEL18 /*!< Not available for STM32F030 devices */ + +#define ADC_Channel_TempSensor ((uint32_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint32_t)ADC_Channel_17) +#define ADC_Channel_Vbat ((uint32_t)ADC_Channel_18) /*!< Not available for STM32F030 devices */ + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) != (uint32_t)RESET) && (((CHANNEL) & 0xFFF80000) == (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition + * @{ + */ + +#define ADC_IT_ADRDY ADC_IER_ADRDYIE +#define ADC_IT_EOSMP ADC_IER_EOSMPIE +#define ADC_IT_EOC ADC_IER_EOCIE +#define ADC_IT_EOSEQ ADC_IER_EOSEQIE +#define ADC_IT_OVR ADC_IER_OVRIE +#define ADC_IT_AWD ADC_IER_AWDIE + +#define IS_ADC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFFFF60) == (uint32_t)RESET)) + +#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_ADRDY) || ((IT) == ADC_IT_EOSMP) || \ + ((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_EOSEQ) || \ + ((IT) == ADC_IT_OVR) || ((IT) == ADC_IT_AWD)) + +#define IS_ADC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFFFF60) == (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @{ + */ + +#define ADC_FLAG_ADRDY ADC_ISR_ADRDY +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP +#define ADC_FLAG_EOC ADC_ISR_EOC +#define ADC_FLAG_EOSEQ ADC_ISR_EOSEQ +#define ADC_FLAG_OVR ADC_ISR_OVR +#define ADC_FLAG_AWD ADC_ISR_AWD + +#define ADC_FLAG_ADEN ((uint32_t)0x01000001) +#define ADC_FLAG_ADDIS ((uint32_t)0x01000002) +#define ADC_FLAG_ADSTART ((uint32_t)0x01000004) +#define ADC_FLAG_ADSTP ((uint32_t)0x01000010) +#define ADC_FLAG_ADCAL ((uint32_t)0x81000000) + +#define IS_ADC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFFFF60) == (uint32_t)RESET)) + +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_ADRDY) || ((FLAG) == ADC_FLAG_EOSMP) || \ + ((FLAG) == ADC_FLAG_EOC) || ((FLAG) == ADC_FLAG_EOSEQ) || \ + ((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_OVR) || \ + ((FLAG) == ADC_FLAG_ADEN) || ((FLAG) == ADC_FLAG_ADDIS) || \ + ((FLAG) == ADC_FLAG_ADSTART) || ((FLAG) == ADC_FLAG_ADSTP) || \ + ((FLAG) == ADC_FLAG_ADCAL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the ADC configuration to the default reset state *****/ +void ADC_DeInit(ADC_TypeDef* ADCx); + +/* Initialization and Configuration functions *********************************/ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_ClockModeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ClockMode); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); +/* This Function is obsolete and maintained for legacy purpose only. + ADC_ClockModeConfig() function should be used instead */ +void ADC_JitterCmd(ADC_TypeDef* ADCx, uint32_t ADC_JitterOff, FunctionalState NewState); + +/* Power saving functions *****************************************************/ +void ADC_AutoPowerOffCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_WaitModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); + +/* Analog Watchdog configuration functions ************************************/ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog_Channel); +void ADC_AnalogWatchdogSingleChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState); + +/* Temperature Sensor , Vrefint and Vbat management function ******************/ +void ADC_TempSensorCmd(FunctionalState NewState); +void ADC_VrefintCmd(FunctionalState NewState); +void ADC_VbatCmd(FunctionalState NewState); /*!< Not applicable for STM32F030 devices */ + +/* Channels Configuration functions *******************************************/ +void ADC_ChannelConfig(ADC_TypeDef* ADCx, uint32_t ADC_Channel, uint32_t ADC_SampleTime); +void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_OverrunModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint32_t ADC_GetCalibrationFactor(ADC_TypeDef* ADCx); +void ADC_StopOfConversion(ADC_TypeDef* ADCx); +void ADC_StartOfConversion(ADC_TypeDef* ADCx); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); + +/* Regular Channels DMA Configuration functions *******************************/ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMARequestModeConfig(ADC_TypeDef* ADCx, uint32_t ADC_DMARequestMode); + +/* Interrupts and flags management functions **********************************/ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint32_t ADC_IT, FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint32_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint32_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint32_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint32_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h new file mode 100644 index 0000000..28f6236 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h @@ -0,0 +1,635 @@ +/** + ****************************************************************************** + * @file stm32f0xx_can.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the CAN firmware + * library, applicable only for STM32F072 devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_CAN_H +#define __STM32F0xx_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN)) + +/** + * @brief CAN init structure definition + */ +typedef struct +{ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off management. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_NART; /*!< Enable or disable the non-automatic retransmission mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_InitTypeDef; + +/** + * @brief CAN filter init structure definition + */ +typedef struct +{ + uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/** + * @brief CAN Rx message structure definition + */ +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /*!< Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CAN_Exported_Constants + * @{ + */ + +/** @defgroup CAN_InitStatus + * @{ + */ + +#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ + + +/* Legacy defines */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +/** + * @} + */ + +/** @defgroup CAN_operating_mode + * @{ + */ + +#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ + ((MODE) == CAN_Mode_LoopBack)|| \ + ((MODE) == CAN_Mode_Silent) || \ + ((MODE) == CAN_Mode_Silent_LoopBack)) +/** + * @} + */ + + + /** + * @defgroup CAN_operating_mode + * @{ + */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ + + +#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ + ((MODE) == CAN_OperatingMode_Normal)|| \ + ((MODE) == CAN_OperatingMode_Sleep)) +/** + * @} + */ + +/** + * @defgroup CAN_operating_mode_status + * @{ + */ + +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width + * @{ + */ +#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ + +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ + ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 + * @{ + */ +#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ + +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 + * @{ + */ +#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ + +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) +/** + * @} + */ + +/** @defgroup CAN_clock_prescaler + * @{ + */ +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) +/** + * @} + */ + +/** @defgroup CAN_filter_number + * @{ + */ +#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) +/** + * @} + */ + +/** @defgroup CAN_filter_mode + * @{ + */ +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ + ((MODE) == CAN_FilterMode_IdList)) +/** + * @} + */ + +/** @defgroup CAN_filter_scale + * @{ + */ +#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ + +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ + ((SCALE) == CAN_FilterScale_32bit)) +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO + * @{ + */ +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ + ((FIFO) == CAN_FilterFIFO1)) + +/* Legacy defines */ +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +/** + * @} + */ + +/** @defgroup CAN_Start_bank_filter_for_slave_CAN + * @{ + */ +#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) +/** + * @} + */ + +/** @defgroup CAN_Tx + * @{ + */ +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) +/** + * @} + */ + +/** @defgroup CAN_identifier_type + * @{ + */ +#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ + ((IDTYPE) == CAN_Id_Extended)) + +/* Legacy defines */ +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request + * @{ + */ +#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) + +/* Legacy defines */ +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +/** + * @} + */ + +/** @defgroup CAN_transmit_constants + * @{ + */ +#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide + an empty mailbox */ +/* Legacy defines */ +#define CANTXFAILED CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants + * @{ + */ +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ + +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) +/** + * @} + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ +#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ + +/* Legacy defines */ +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +/** + * @} + */ + +/** @defgroup CAN_wake_up_constants + * @{ + */ +#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ + +/* Legacy defines */ +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok +/** + * @} + */ + +/** + * @defgroup CAN_Error_Code_constants + * @{ + */ +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ +/** + * @} + */ + +/** @defgroup CAN_flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with + CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ +/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ + +#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ + ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ + ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ + ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_SLAK )) + +#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ + ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) +/** + * @} + */ + + +/** @defgroup CAN_interrupts + * @{ + */ +#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + + +#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ + ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ + ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ + ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the CAN configuration to the default reset state *****/ +void CAN_DeInit(CAN_TypeDef* CANx); + +/* Initialization and Configuration functions *********************************/ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); + +/* CAN Frames Transmission functions ******************************************/ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); + +/* CAN Frames Reception functions *********************************************/ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); + +/* Operation modes functions **************************************************/ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef* CANx); +uint8_t CAN_WakeUp(CAN_TypeDef* CANx); + +/* CAN Bus Error management functions *****************************************/ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); + +/* Interrupts and flags management functions **********************************/ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_CAN_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_cec.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_cec.h new file mode 100644 index 0000000..3f3c639 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_cec.h @@ -0,0 +1,292 @@ +/** + ****************************************************************************** + * @file stm32f0xx_cec.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the CEC firmware + * library, applicable only for STM32F051, STM32F042 and STM32F072 devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_CEC_H +#define __STM32F0XX_CEC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief CEC Init structure definition + */ +typedef struct +{ + uint32_t CEC_SignalFreeTime; /*!< Specifies the CEC Signal Free Time configuration. + This parameter can be a value of @ref CEC_Signal_Free_Time */ + uint32_t CEC_RxTolerance; /*!< Specifies the CEC Reception Tolerance. + This parameter can be a value of @ref CEC_RxTolerance */ + uint32_t CEC_StopReception; /*!< Specifies the CEC Stop Reception. + This parameter can be a value of @ref CEC_Stop_Reception */ + uint32_t CEC_BitRisingError; /*!< Specifies the CEC Bit Rising Error generation. + This parameter can be a value of @ref CEC_Bit_Rising_Error_Generation */ + uint32_t CEC_LongBitPeriodError; /*!< Specifies the CEC Long Bit Error generation. + This parameter can be a value of @ref CEC_Long_Bit_Error_Generation */ + uint32_t CEC_BRDNoGen; /*!< Specifies the CEC Broadcast Error generation. + This parameter can be a value of @ref CEC_BDR_No_Gen */ + uint32_t CEC_SFTOption; /*!< Specifies the CEC Signal Free Time option. + This parameter can be a value of @ref CEC_SFT_Option */ + +}CEC_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CEC_Exported_Constants + * @{ + */ + +/** @defgroup CEC_Signal_Free_Time + * @{ + */ +#define CEC_SignalFreeTime_Standard ((uint32_t)0x00000000) /*!< CEC Signal Free Time Standard */ +#define CEC_SignalFreeTime_1T ((uint32_t)0x00000001) /*!< CEC 1.5 nominal data bit periods */ +#define CEC_SignalFreeTime_2T ((uint32_t)0x00000002) /*!< CEC 2.5 nominal data bit periods */ +#define CEC_SignalFreeTime_3T ((uint32_t)0x00000003) /*!< CEC 3.5 nominal data bit periods */ +#define CEC_SignalFreeTime_4T ((uint32_t)0x00000004) /*!< CEC 4.5 nominal data bit periods */ +#define CEC_SignalFreeTime_5T ((uint32_t)0x00000005) /*!< CEC 5.5 nominal data bit periods */ +#define CEC_SignalFreeTime_6T ((uint32_t)0x00000006) /*!< CEC 6.5 nominal data bit periods */ +#define CEC_SignalFreeTime_7T ((uint32_t)0x00000007) /*!< CEC 7.5 nominal data bit periods */ + +#define IS_CEC_SIGNAL_FREE_TIME(TIME) (((TIME) == CEC_SignalFreeTime_Standard) || \ + ((TIME) == CEC_SignalFreeTime_1T)|| \ + ((TIME) == CEC_SignalFreeTime_2T)|| \ + ((TIME) == CEC_SignalFreeTime_3T)|| \ + ((TIME) == CEC_SignalFreeTime_4T)|| \ + ((TIME) == CEC_SignalFreeTime_5T)|| \ + ((TIME) == CEC_SignalFreeTime_6T)|| \ + ((TIME) == CEC_SignalFreeTime_7T)) +/** + * @} + */ + +/** @defgroup CEC_RxTolerance + * @{ + */ +#define CEC_RxTolerance_Standard ((uint32_t)0x00000000) /*!< Standard Tolerance Margin */ +#define CEC_RxTolerance_Extended CEC_CFGR_RXTOL /*!< Extended Tolerance Margin */ + +#define IS_CEC_RX_TOLERANCE(TOLERANCE) (((TOLERANCE) == CEC_RxTolerance_Standard) || \ + ((TOLERANCE) == CEC_RxTolerance_Extended)) +/** + * @} + */ + +/** @defgroup CEC_Stop_Reception + * @{ + */ +#define CEC_StopReception_Off ((uint32_t)0x00000000) /*!< No RX Stop on bit Rising Error (BRE) */ +#define CEC_StopReception_On CEC_CFGR_BRESTP /*!< RX Stop on bit Rising Error (BRE) */ + +#define IS_CEC_STOP_RECEPTION(RECEPTION) (((RECEPTION) == CEC_StopReception_On) || \ + ((RECEPTION) == CEC_StopReception_Off)) +/** + * @} + */ + +/** @defgroup CEC_Bit_Rising_Error_Generation + * @{ + */ +#define CEC_BitRisingError_Off ((uint32_t)0x00000000) /*!< Bit Rising Error generation turned Off */ +#define CEC_BitRisingError_On CEC_CFGR_BREGEN /*!< Bit Rising Error generation turned On */ + +#define IS_CEC_BIT_RISING_ERROR(ERROR) (((ERROR) == CEC_BitRisingError_Off) || \ + ((ERROR) == CEC_BitRisingError_On)) +/** + * @} + */ + +/** @defgroup CEC_Long_Bit_Error_Generation + * @{ + */ +#define CEC_LongBitPeriodError_Off ((uint32_t)0x00000000) /*!< Long Bit Period Error generation turned Off */ +#define CEC_LongBitPeriodError_On CEC_CFGR_LREGEN /*!< Long Bit Period Error generation turned On */ + +#define IS_CEC_LONG_BIT_PERIOD_ERROR(ERROR) (((ERROR) == CEC_LongBitPeriodError_Off) || \ + ((ERROR) == CEC_LongBitPeriodError_On)) +/** + * @} + */ + +/** @defgroup CEC_BDR_No_Gen + * @{ + */ + +#define CEC_BRDNoGen_Off ((uint32_t)0x00000000) /*!< Broadcast Bit Rising Error generation turned Off */ +#define CEC_BRDNoGen_On CEC_CFGR_BRDNOGEN /*!< Broadcast Bit Rising Error generation turned On */ + +#define IS_CEC_BDR_NO_GEN_ERROR(ERROR) (((ERROR) == CEC_BRDNoGen_Off) || \ + ((ERROR) == CEC_BRDNoGen_On)) +/** + * @} + */ + +/** @defgroup CEC_SFT_Option + * @{ + */ +#define CEC_SFTOption_Off ((uint32_t)0x00000000) /*!< SFT option turned Off */ +#define CEC_SFTOption_On CEC_CFGR_SFTOPT /*!< SFT option turned On */ + +#define IS_CEC_SFT_OPTION(OPTION) (((OPTION) == CEC_SFTOption_Off) || \ + ((OPTION) == CEC_SFTOption_On)) +/** + * @} + */ + +/** @defgroup CEC_Own_Address + * @{ + */ +#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10) + +/** + * @} + */ + +/** @defgroup CEC_Interrupt_Configuration_definition + * @{ + */ +#define CEC_IT_TXACKE CEC_IER_TXACKEIE +#define CEC_IT_TXERR CEC_IER_TXERRIE +#define CEC_IT_TXUDR CEC_IER_TXUDRIE +#define CEC_IT_TXEND CEC_IER_TXENDIE +#define CEC_IT_TXBR CEC_IER_TXBRIE +#define CEC_IT_ARBLST CEC_IER_ARBLSTIE +#define CEC_IT_RXACKE CEC_IER_RXACKEIE +#define CEC_IT_LBPE CEC_IER_LBPEIE +#define CEC_IT_SBPE CEC_IER_SBPEIE +#define CEC_IT_BRE CEC_IER_BREIEIE +#define CEC_IT_RXOVR CEC_IER_RXOVRIE +#define CEC_IT_RXEND CEC_IER_RXENDIE +#define CEC_IT_RXBR CEC_IER_RXBRIE + +#define IS_CEC_IT(IT) ((((IT) & (uint32_t)0xFFFFE000) == 0x00) && ((IT) != 0x00)) + +#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TXACKE) || \ + ((IT) == CEC_IT_TXERR)|| \ + ((IT) == CEC_IT_TXUDR)|| \ + ((IT) == CEC_IT_TXEND)|| \ + ((IT) == CEC_IT_TXBR)|| \ + ((IT) == CEC_IT_ARBLST)|| \ + ((IT) == CEC_IT_RXACKE)|| \ + ((IT) == CEC_IT_LBPE)|| \ + ((IT) == CEC_IT_SBPE)|| \ + ((IT) == CEC_IT_BRE)|| \ + ((IT) == CEC_IT_RXOVR)|| \ + ((IT) == CEC_IT_RXEND)|| \ + ((IT) == CEC_IT_RXBR)) +/** + * @} + */ + +/** @defgroup CEC_ISR_register_flags_definition + * @{ + */ +#define CEC_FLAG_TXACKE CEC_ISR_TXACKE +#define CEC_FLAG_TXERR CEC_ISR_TXERR +#define CEC_FLAG_TXUDR CEC_ISR_TXUDR +#define CEC_FLAG_TXEND CEC_ISR_TXEND +#define CEC_FLAG_TXBR CEC_ISR_TXBR +#define CEC_FLAG_ARBLST CEC_ISR_ARBLST +#define CEC_FLAG_RXACKE CEC_ISR_RXACKE +#define CEC_FLAG_LBPE CEC_ISR_LBPE +#define CEC_FLAG_SBPE CEC_ISR_SBPE +#define CEC_FLAG_BRE CEC_ISR_BRE +#define CEC_FLAG_RXOVR CEC_ISR_RXOVR +#define CEC_FLAG_RXEND CEC_ISR_RXEND +#define CEC_FLAG_RXBR CEC_ISR_RXBR + +#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFE000) == 0x00) && ((FLAG) != 0x00)) + +#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_TXACKE) || \ + ((FLAG) == CEC_FLAG_TXERR)|| \ + ((FLAG) == CEC_FLAG_TXUDR)|| \ + ((FLAG) == CEC_FLAG_TXEND)|| \ + ((FLAG) == CEC_FLAG_TXBR)|| \ + ((FLAG) == CEC_FLAG_ARBLST)|| \ + ((FLAG) == CEC_FLAG_RXACKE)|| \ + ((FLAG) == CEC_FLAG_LBPE)|| \ + ((FLAG) == CEC_FLAG_SBPE)|| \ + ((FLAG) == CEC_FLAG_BRE)|| \ + ((FLAG) == CEC_FLAG_RXOVR)|| \ + ((FLAG) == CEC_FLAG_RXEND)|| \ + ((FLAG) == CEC_FLAG_RXBR)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the CEC configuration to the default reset state *****/ +void CEC_DeInit(void); + +/* CEC_Initialization and Configuration functions *****************************/ +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct); +void CEC_StructInit(CEC_InitTypeDef* CEC_InitStruct); +void CEC_Cmd(FunctionalState NewState); +void CEC_ListenModeCmd(FunctionalState NewState); +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress); +void CEC_OwnAddressClear(void); + +/* CEC_Data transfers functions ***********************************************/ +void CEC_SendData(uint8_t Data); +uint8_t CEC_ReceiveData(void); +void CEC_StartOfMessage(void); +void CEC_EndOfMessage(void); + +/* CEC_Interrupts and flags management functions ******************************/ +void CEC_ITConfig(uint16_t CEC_IT, FunctionalState NewState); +FlagStatus CEC_GetFlagStatus(uint16_t CEC_FLAG); +void CEC_ClearFlag(uint32_t CEC_FLAG); +ITStatus CEC_GetITStatus(uint16_t CEC_IT); +void CEC_ClearITPendingBit(uint16_t CEC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_CEC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h new file mode 100644 index 0000000..630a465 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h @@ -0,0 +1,237 @@ +/** + ****************************************************************************** + * @file stm32f0xx_comp.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the COMP firmware + * library, applicable only for STM32F051 and STM32F072 devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_COMP_H +#define __STM32F0XX_COMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief COMP Init structure definition + */ + +typedef struct +{ + + uint32_t COMP_InvertingInput; /*!< Selects the inverting input of the comparator. + This parameter can be a value of @ref COMP_InvertingInput */ + + uint32_t COMP_Output; /*!< Selects the output redirection of the comparator. + This parameter can be a value of @ref COMP_Output */ + + uint32_t COMP_OutputPol; /*!< Selects the output polarity of the comparator. + This parameter can be a value of @ref COMP_OutputPolarity */ + + uint32_t COMP_Hysteresis; /*!< Selects the hysteresis voltage of the comparator. + This parameter can be a value of @ref COMP_Hysteresis */ + + uint32_t COMP_Mode; /*!< Selects the operating mode of the comparator + and allows to adjust the speed/consumption. + This parameter can be a value of @ref COMP_Mode */ + +}COMP_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Constants + * @{ + */ + +/** @defgroup COMP_Selection + * @{ + */ + +#define COMP_Selection_COMP1 ((uint32_t)0x00000000) /*!< COMP1 Selection */ +#define COMP_Selection_COMP2 ((uint32_t)0x00000010) /*!< COMP2 Selection */ + +#define IS_COMP_ALL_PERIPH(PERIPH) (((PERIPH) == COMP_Selection_COMP1) || \ + ((PERIPH) == COMP_Selection_COMP2)) + +/** + * @} + */ + +/** @defgroup COMP_InvertingInput + * @{ + */ + +#define COMP_InvertingInput_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ +#define COMP_InvertingInput_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ +#define COMP_InvertingInput_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ +#define COMP_InvertingInput_VREFINT ((uint32_t)0x00000030) /*!< VREFINT connected to comparator inverting input */ +#define COMP_InvertingInput_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC1_OUT (PA4) connected to comparator inverting input */ +#define COMP_InvertingInput_DAC2 ((uint32_t)0x00000050) /*!< DAC2_OUT (PA5) connected to comparator inverting input, applicable only for STM32F072 devices */ +#define COMP_InvertingInput_IO ((uint32_t)0x00000060) /*!< I/O (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */ + +#define IS_COMP_INVERTING_INPUT(INPUT) (((INPUT) == COMP_InvertingInput_1_4VREFINT) || \ + ((INPUT) == COMP_InvertingInput_1_2VREFINT) || \ + ((INPUT) == COMP_InvertingInput_3_4VREFINT) || \ + ((INPUT) == COMP_InvertingInput_VREFINT) || \ + ((INPUT) == COMP_InvertingInput_DAC1) || \ + ((INPUT) == COMP_InvertingInput_DAC2) || \ + ((INPUT) == COMP_InvertingInput_1_4VREFINT) || \ + ((INPUT) == COMP_InvertingInput_IO)) +/** + * @} + */ + +/** @defgroup COMP_Output + * @{ + */ + +#define COMP_Output_None ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ +#define COMP_Output_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ +#define COMP_Output_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */ +#define COMP_Output_TIM1OCREFCLR ((uint32_t)0x00000300) /*!< COMP output connected to TIM1 OCREF Clear */ +#define COMP_Output_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */ +#define COMP_Output_TIM2OCREFCLR ((uint32_t)0x00000500) /*!< COMP output connected to TIM2 OCREF Clear */ +#define COMP_Output_TIM3IC1 ((uint32_t)0x00000600) /*!< COMP output connected to TIM3 Input Capture 1 */ +#define COMP_Output_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */ + + +#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_Output_None) || \ + ((OUTPUT) == COMP_Output_TIM1BKIN) || \ + ((OUTPUT) == COMP_Output_TIM1IC1) || \ + ((OUTPUT) == COMP_Output_TIM1OCREFCLR) || \ + ((OUTPUT) == COMP_Output_TIM2IC4) || \ + ((OUTPUT) == COMP_Output_TIM2OCREFCLR) || \ + ((OUTPUT) == COMP_Output_TIM3IC1) || \ + ((OUTPUT) == COMP_Output_TIM3OCREFCLR)) +/** + * @} + */ + +/** @defgroup COMP_OutputPolarity + * @{ + */ +#define COMP_OutputPol_NonInverted ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ +#define COMP_OutputPol_Inverted COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */ + +#define IS_COMP_OUTPUT_POL(POL) (((POL) == COMP_OutputPol_NonInverted) || \ + ((POL) == COMP_OutputPol_Inverted)) + +/** + * @} + */ + +/** @defgroup COMP_Hysteresis + * @{ + */ +/* Please refer to the electrical characteristics in the device datasheet for + the hysteresis level */ +#define COMP_Hysteresis_No 0x00000000 /*!< No hysteresis */ +#define COMP_Hysteresis_Low COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */ +#define COMP_Hysteresis_Medium COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */ +#define COMP_Hysteresis_High COMP_CSR_COMP1HYST /*!< Hysteresis level high */ + +#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_Hysteresis_No) || \ + ((HYSTERESIS) == COMP_Hysteresis_Low) || \ + ((HYSTERESIS) == COMP_Hysteresis_Medium) || \ + ((HYSTERESIS) == COMP_Hysteresis_High)) +/** + * @} + */ + +/** @defgroup COMP_Mode + * @{ + */ +/* Please refer to the electrical characteristics in the device datasheet for + the power consumption values */ +#define COMP_Mode_HighSpeed 0x00000000 /*!< High Speed */ +#define COMP_Mode_MediumSpeed COMP_CSR_COMP1MODE_0 /*!< Medium Speed */ +#define COMP_Mode_LowPower COMP_CSR_COMP1MODE_1 /*!< Low power mode */ +#define COMP_Mode_UltraLowPower COMP_CSR_COMP1MODE /*!< Ultra-low power mode */ + +#define IS_COMP_MODE(MODE) (((MODE) == COMP_Mode_UltraLowPower) || \ + ((MODE) == COMP_Mode_LowPower) || \ + ((MODE) == COMP_Mode_MediumSpeed) || \ + ((MODE) == COMP_Mode_HighSpeed)) +/** + * @} + */ + +/** @defgroup COMP_OutputLevel + * @{ + */ +/* When output polarity is not inverted, comparator output is high when + the non-inverting input is at a higher voltage than the inverting input */ +#define COMP_OutputLevel_High COMP_CSR_COMP1OUT +/* When output polarity is not inverted, comparator output is low when + the non-inverting input is at a lower voltage than the inverting input*/ +#define COMP_OutputLevel_Low ((uint32_t)0x00000000) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the COMP configuration to the default reset state ****/ +void COMP_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct); +void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct); +void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState); +void COMP_SwitchCmd(FunctionalState NewState); +uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection); + +/* Window mode control function ***********************************************/ +void COMP_WindowCmd(FunctionalState NewState); + +/* COMP configuration locking function ****************************************/ +void COMP_LockConfig(uint32_t COMP_Selection); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_COMP_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_crc.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_crc.h new file mode 100644 index 0000000..7a8cf37 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_crc.h @@ -0,0 +1,114 @@ +/** + ****************************************************************************** + * @file stm32f0xx_crc.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the CRC firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_CRC_H +#define __STM32F0XX_CRC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/*!< Includes ----------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CRC_ReverseInputData + * @{ + */ +#define CRC_ReverseInputData_No ((uint32_t)0x00000000) /*!< No reverse operation of Input Data */ +#define CRC_ReverseInputData_8bits CRC_CR_REV_IN_0 /*!< Reverse operation of Input Data on 8 bits */ +#define CRC_ReverseInputData_16bits CRC_CR_REV_IN_1 /*!< Reverse operation of Input Data on 16 bits */ +#define CRC_ReverseInputData_32bits CRC_CR_REV_IN /*!< Reverse operation of Input Data on 32 bits */ + +#define IS_CRC_REVERSE_INPUT_DATA(DATA) (((DATA) == CRC_ReverseInputData_No) || \ + ((DATA) == CRC_ReverseInputData_8bits) || \ + ((DATA) == CRC_ReverseInputData_16bits) || \ + ((DATA) == CRC_ReverseInputData_32bits)) + +/** + * @} + */ + +/** @defgroup CRC_PolynomialSize + * @brief Only applicable for STM32F042 and STM32F072 devices + * @{ + */ +#define CRC_PolSize_7 CRC_CR_POLSIZE /*!< 7-bit polynomial for CRC calculation */ +#define CRC_PolSize_8 CRC_CR_POLSIZE_1 /*!< 8-bit polynomial for CRC calculation */ +#define CRC_PolSize_16 CRC_CR_POLSIZE_0 /*!< 16-bit polynomial for CRC calculation */ +#define CRC_PolSize_32 ((uint32_t)0x00000000)/*!< 32-bit polynomial for CRC calculation */ + +#define IS_CRC_POL_SIZE(SIZE) (((SIZE) == CRC_PolSize_7) || \ + ((SIZE) == CRC_PolSize_8) || \ + ((SIZE) == CRC_PolSize_16) || \ + ((SIZE) == CRC_PolSize_32)) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Configuration of the CRC computation unit **********************************/ +void CRC_DeInit(void); +void CRC_ResetDR(void); +void CRC_PolynomialSizeSelect(uint32_t CRC_PolSize); /*!< Only applicable for STM32F042 and STM32F072 devices */ +void CRC_ReverseInputDataSelect(uint32_t CRC_ReverseInputData); +void CRC_ReverseOutputDataCmd(FunctionalState NewState); +void CRC_SetInitRegister(uint32_t CRC_InitValue); +void CRC_SetPolynomial(uint32_t CRC_Pol); /*!< Only applicable for STM32F042 and STM32F072 devices */ + +/* CRC computation ************************************************************/ +uint32_t CRC_CalcCRC(uint32_t CRC_Data); +uint32_t CRC_CalcCRC16bits(uint16_t CRC_Data); /*!< Only applicable for STM32F042 and STM32F072 devices */ +uint32_t CRC_CalcCRC8bits(uint8_t CRC_Data); /*!< Only applicable for STM32F042 and STM32F072 devices */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); +uint32_t CRC_GetCRC(void); + +/* Independent register (IDR) access (write/read) *****************************/ +void CRC_SetIDRegister(uint8_t CRC_IDValue); +uint8_t CRC_GetIDRegister(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_CRC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_crs.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_crs.h new file mode 100644 index 0000000..03b02a3 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_crs.h @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file stm32f0xx_crs.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the CRS firmware + * library, applicable only for STM32F042 and STM32F072 devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_CRS_H +#define __STM32F0XX_CRS_H + +#ifdef __cplusplus + extern "C" { +#endif + +/*!< Includes ----------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CRS_Interrupt_Sources + * @{ + */ +#define CRS_IT_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK */ +#define CRS_IT_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning */ +#define CRS_IT_ERR CRS_ISR_ERRF /*!< error */ +#define CRS_IT_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC */ +#define CRS_IT_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ +#define CRS_IT_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define CRS_IT_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ + +#define IS_CRS_IT(IT) (((IT) == CRS_IT_SYNCOK) || ((IT) == CRS_IT_SYNCWARN) || \ + ((IT) == CRS_IT_ERR) || ((IT) == CRS_IT_ESYNC)) + +#define IS_CRS_GET_IT(IT) (((IT) == CRS_IT_SYNCOK) || ((IT) == CRS_IT_SYNCWARN) || \ + ((IT) == CRS_IT_ERR) || ((IT) == CRS_IT_ESYNC) || \ + ((IT) == CRS_IT_TRIMOVF) || ((IT) == CRS_IT_SYNCERR) || \ + ((IT) == CRS_IT_SYNCMISS)) + +#define IS_CRS_CLEAR_IT(IT) ((IT) != 0x00) + +/** + * @} + */ + +/** @defgroup CRS_Flags + * @{ + */ +#define CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK */ +#define CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning */ +#define CRS_FLAG_ERR CRS_ISR_ERRF /*!< error */ +#define CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC */ +#define CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ +#define CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ + +#define IS_CRS_FLAG(FLAG) (((FLAG) == CRS_FLAG_SYNCOK) || ((FLAG) == CRS_FLAG_SYNCWARN) || \ + ((FLAG) == CRS_FLAG_ERR) || ((FLAG) == CRS_FLAG_ESYNC) || \ + ((FLAG) == CRS_FLAG_TRIMOVF) || ((FLAG) == CRS_FLAG_SYNCERR) || \ + ((FLAG) == CRS_FLAG_SYNCMISS)) + +/** + * @} + */ + +/** @defgroup CRS_Synchro_Source + * @{ + */ +#define CRS_SYNCSource_GPIO ((uint32_t)0x00) /*!< Synchro Signal soucre GPIO */ +#define CRS_SYNCSource_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define CRS_SYNCSource_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF */ + +#define IS_CRS_SYNC_SOURCE(SOURCE) (((SOURCE) == CRS_SYNCSource_GPIO) || \ + ((SOURCE) == CRS_SYNCSource_LSE) ||\ + ((SOURCE) == CRS_SYNCSource_USB)) +/** + * @} + */ + +/** @defgroup CRS_SynchroDivider + * @{ + */ +#define CRS_SYNC_Div1 ((uint32_t)0x00) /*!< Synchro Signal not divided */ +#define CRS_SYNC_Div2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define CRS_SYNC_Div4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define CRS_SYNC_Div8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define CRS_SYNC_Div16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define CRS_SYNC_Div32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define CRS_SYNC_Div64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define CRS_SYNC_Div128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ + +#define IS_CRS_SYNC_DIV(DIV) (((DIV) == CRS_SYNC_Div1) || ((DIV) == CRS_SYNC_Div2) ||\ + ((DIV) == CRS_SYNC_Div4) || ((DIV) == CRS_SYNC_Div8) || \ + ((DIV) == CRS_SYNC_Div16) || ((DIV) == CRS_SYNC_Div32) || \ + ((DIV) == CRS_SYNC_Div64) || ((DIV) == CRS_SYNC_Div128)) +/** + * @} + */ + +/** @defgroup CRS_SynchroPolarity + * @{ + */ +#define CRS_SYNCPolarity_Rising ((uint32_t)0x00) /*!< Synchro Active on rising edge */ +#define CRS_SYNCPolarity_Falling CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ + +#define IS_CRS_SYNC_POLARITY(POLARITY) (((POLARITY) == CRS_SYNCPolarity_Rising) || \ + ((POLARITY) == CRS_SYNCPolarity_Falling)) +/** + * @} + */ + + + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Configuration of the CRS **********************************/ +void CRS_DeInit(void); +void CRS_AdjustHSI48CalibrationValue(uint8_t CRS_HSI48CalibrationValue); +void CRS_FrequencyErrorCounterCmd(FunctionalState NewState); +void CRS_AutomaticCalibrationCmd(FunctionalState NewState); +void CRS_SoftwareSynchronizationGenerate(void); +void CRS_FrequencyErrorCounterReload(uint32_t CRS_ReloadValue); +void CRS_FrequencyErrorLimitConfig(uint8_t CRS_ErrorLimitValue); +void CRS_SynchronizationPrescalerConfig(uint32_t CRS_Prescaler); +void CRS_SynchronizationSourceConfig(uint32_t CRS_Source); +void CRS_SynchronizationPolarityConfig(uint32_t CRS_Polarity); +uint32_t CRS_GetReloadValue(void); +uint32_t CRS_GetHSI48CalibrationValue(void); +uint32_t CRS_GetFrequencyErrorValue(void); +uint32_t CRS_GetFrequencyErrorDirection(void); + +/* Interrupts and flags management functions **********************************/ +void CRS_ITConfig(uint32_t CRS_IT, FunctionalState NewState); +FlagStatus CRS_GetFlagStatus(uint32_t CRS_FLAG); +void CRS_ClearFlag(uint32_t CRS_FLAG); +ITStatus CRS_GetITStatus(uint32_t CRS_IT); +void CRS_ClearITPendingBit(uint32_t CRS_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_CRS_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dac.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dac.h new file mode 100644 index 0000000..c6fa459 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dac.h @@ -0,0 +1,304 @@ +/** + ****************************************************************************** + * @file stm32f0xx_dac.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the DAC firmware + * library, applicable only for STM32F051 and STM32F072 devices. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_DAC_H +#define __STM32F0XX_DAC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief DAC Init structure definition + */ + +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves + are generated, or whether no wave is generated. + This parameter can be a value of @ref DAC_wave_generation + This parameter is only applicable for STM32F072 devices */ + + uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or + the maximum amplitude triangle generation for the DAC channel. + This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude + This parameter is only applicable for STM32F072 devices */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ +}DAC_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants + * @{ + */ + +/** @defgroup DAC_Trigger + * @{ + */ + +#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel1 */ +#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel1 */ +#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel1, + applicable only for STM32F072 devices */ +#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel1 */ +#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel1 */ +#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channels */ +#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channels */ + +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ + ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T3_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T15_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ + ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ + ((TRIGGER) == DAC_Trigger_Software)) + +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @brief This parameters are only applicable for STM32F072 devices. + * @{ + */ + +#define DAC_WaveGeneration_None ((uint32_t)0x00000000) +#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) +#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) +#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ + ((WAVE) == DAC_WaveGeneration_Noise) || \ + ((WAVE) == DAC_WaveGeneration_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_lfsrunmask_triangleamplitude + * @brief These parameters are only applicable for STM32F072 devices. + * @{ + */ + +#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ +#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ +#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ +#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ +#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ +#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ +#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ +#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ +#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ +#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ + ((VALUE) == DAC_TriangleAmplitude_1) || \ + ((VALUE) == DAC_TriangleAmplitude_3) || \ + ((VALUE) == DAC_TriangleAmplitude_7) || \ + ((VALUE) == DAC_TriangleAmplitude_15) || \ + ((VALUE) == DAC_TriangleAmplitude_31) || \ + ((VALUE) == DAC_TriangleAmplitude_63) || \ + ((VALUE) == DAC_TriangleAmplitude_127) || \ + ((VALUE) == DAC_TriangleAmplitude_255) || \ + ((VALUE) == DAC_TriangleAmplitude_511) || \ + ((VALUE) == DAC_TriangleAmplitude_1023) || \ + ((VALUE) == DAC_TriangleAmplitude_2047) || \ + ((VALUE) == DAC_TriangleAmplitude_4095)) +/** + * @} + */ + +/** @defgroup DAC_OutputBuffer + * @{ + */ + +#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) +#define DAC_OutputBuffer_Disable DAC_CR_BOFF1 +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ + ((STATE) == DAC_OutputBuffer_Disable)) +/** + * @} + */ + +/** @defgroup DAC_Channel_selection + * @{ + */ + +#define DAC_Channel_1 ((uint32_t)0x00000000) +#define DAC_Channel_2 ((uint32_t)0x00000010) /*!< Only applicable for STM32F072 devices */ +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ + ((CHANNEL) == DAC_Channel_2)) + +/** + * @} + */ + +/** @defgroup DAC_data_alignment + * @{ + */ + +#define DAC_Align_12b_R ((uint32_t)0x00000000) +#define DAC_Align_12b_L ((uint32_t)0x00000004) +#define DAC_Align_8b_R ((uint32_t)0x00000008) +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ + ((ALIGN) == DAC_Align_12b_L) || \ + ((ALIGN) == DAC_Align_8b_R)) +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @brief These parameters are only applicable for STM32F072 devices. + * @{ + */ + +#define DAC_Wave_Noise ((uint32_t)0x00000040) +#define DAC_Wave_Triangle ((uint32_t)0x00000080) +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ + ((WAVE) == DAC_Wave_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_data + * @{ + */ + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) + +/** + * @} + */ + +/** @defgroup DAC_interrupts_definition + * @{ + */ + +#define DAC_IT_DMAUDR DAC_SR_DMAUDR1 +#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) + +/** + * @} + */ + + +/** @defgroup DAC_flags_definition + * @{ + */ + +#define DAC_FLAG_DMAUDR DAC_SR_DMAUDR1 + +#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the DAC configuration to the default reset state *****/ +void DAC_DeInit(void); + +/* DAC channels configuration: trigger, output buffer, data format functions */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); /*!< Only applicable for STM32F072 devices */ +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); /*!< Only applicable for STM32F072 devices */ +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); /*!< Only applicable for STM32F072 devices */ +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); /*!< Only applicable for STM32F072 devices */ +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); + +/* DMA management functions ***************************************************/ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState); +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG); +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG); +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT); +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_DAC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dbgmcu.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dbgmcu.h new file mode 100644 index 0000000..b056e7d --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dbgmcu.h @@ -0,0 +1,99 @@ +/** + ****************************************************************************** + * @file stm32f0xx_dbgmcu.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the DBGMCU firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_DBGMCU_H +#define __STM32F0XX_DBGMCU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DBGMCU + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup DBGMCU_Exported_Constants + * @{ + */ + +#define DBGMCU_STOP DBGMCU_CR_DBG_STOP +#define DBGMCU_STANDBY DBGMCU_CR_DBG_STANDBY +#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF9) == 0x00) && ((PERIPH) != 0x00)) + +#define DBGMCU_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< Not applicable for STM32F030 devices */ +#define DBGMCU_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP +#define DBGMCU_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP +#define DBGMCU_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< Only applicable for STM32F072 devices */ +#define DBGMCU_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP +#define DBGMCU_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP +#define DBGMCU_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP +#define DBGMCU_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP +#define DBGMCU_I2C1_SMBUS_TIMEOUT DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT +#define DBGMCU_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< Only applicable for STM32F042 and STM32F072 devices */ +#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xFDDFE2CC) == 0x00) && ((PERIPH) != 0x00)) + +#define DBGMCU_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP +#define DBGMCU_TIM15_STOP DBGMCU_APB2_FZ_DBG_TIM15_STOP +#define DBGMCU_TIM16_STOP DBGMCU_APB2_FZ_DBG_TIM16_STOP +#define DBGMCU_TIM17_STOP DBGMCU_APB2_FZ_DBG_TIM17_STOP +#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8F7FF) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Device and Revision ID management functions ********************************/ +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); + +/* Peripherals Configuration functions ****************************************/ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); +void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); +void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_DBGMCU_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dma.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dma.h new file mode 100644 index 0000000..44fdd2f --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_dma.h @@ -0,0 +1,796 @@ +/** + ****************************************************************************** + * @file stm32f0xx_dma.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the DMA firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_DMA_H +#define __STM32F0XX_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief DMA Init structures definition + */ +typedef struct +{ + uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ + + uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ + + uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction */ + + uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_circular_normal_mode + @note: The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. + This parameter can be a value of @ref DMA_memory_to_memory */ +}DMA_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants + * @{ + */ + +#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ + ((PERIPH) == DMA1_Channel2) || \ + ((PERIPH) == DMA1_Channel3) || \ + ((PERIPH) == DMA1_Channel4) || \ + ((PERIPH) == DMA1_Channel5) || \ + ((PERIPH) == DMA1_Channel6) || \ + ((PERIPH) == DMA1_Channel7) || \ + ((PERIPH) == DMA2_Channel1) || \ + ((PERIPH) == DMA2_Channel2) || \ + ((PERIPH) == DMA2_Channel3) || \ + ((PERIPH) == DMA2_Channel4) || \ + ((PERIPH) == DMA2_Channel5)) + +/** @defgroup DMA_data_transfer_direction + * @{ + */ + +#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) +#define DMA_DIR_PeripheralDST DMA_CCR_DIR + +#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralSRC) || \ + ((DIR) == DMA_DIR_PeripheralDST)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_incremented_mode + * @{ + */ + +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) +#define DMA_PeripheralInc_Enable DMA_CCR_PINC + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Disable) || \ + ((STATE) == DMA_PeripheralInc_Enable)) +/** + * @} + */ + +/** @defgroup DMA_memory_incremented_mode + * @{ + */ + +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) +#define DMA_MemoryInc_Enable DMA_CCR_MINC + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Disable) || \ + ((STATE) == DMA_MemoryInc_Enable)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_data_size + * @{ + */ + +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord DMA_CCR_PSIZE_0 +#define DMA_PeripheralDataSize_Word DMA_CCR_PSIZE_1 + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ + ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ + ((SIZE) == DMA_PeripheralDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_memory_data_size + * @{ + */ + +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord DMA_CCR_MSIZE_0 +#define DMA_MemoryDataSize_Word DMA_CCR_MSIZE_1 + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ + ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ + ((SIZE) == DMA_MemoryDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_circular_normal_mode + * @{ + */ + +#define DMA_Mode_Normal ((uint32_t)0x00000000) +#define DMA_Mode_Circular DMA_CCR_CIRC + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Normal) || ((MODE) == DMA_Mode_Circular)) +/** + * @} + */ + +/** @defgroup DMA_priority_level + * @{ + */ + +#define DMA_Priority_VeryHigh DMA_CCR_PL +#define DMA_Priority_High DMA_CCR_PL_1 +#define DMA_Priority_Medium DMA_CCR_PL_0 +#define DMA_Priority_Low ((uint32_t)0x00000000) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ + ((PRIORITY) == DMA_Priority_High) || \ + ((PRIORITY) == DMA_Priority_Medium) || \ + ((PRIORITY) == DMA_Priority_Low)) +/** + * @} + */ + +/** @defgroup DMA_memory_to_memory + * @{ + */ + +#define DMA_M2M_Disable ((uint32_t)0x00000000) +#define DMA_M2M_Enable DMA_CCR_MEM2MEM + +#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Disable) || ((STATE) == DMA_M2M_Enable)) + +/** + * @} + */ + +/** @defgroup DMA_Remap_Config + * @{ + */ +#define DMAx_CHANNEL1_RMP 0x00000000 +#define DMAx_CHANNEL2_RMP 0x10000000 +#define DMAx_CHANNEL3_RMP 0x20000000 +#define DMAx_CHANNEL4_RMP 0x30000000 +#define DMAx_CHANNEL5_RMP 0x40000000 +#define DMAx_CHANNEL6_RMP 0x50000000 +#define DMAx_CHANNEL7_RMP 0x60000000 + + +#define IS_DMA_ALL_LIST(LIST) (((LIST) == DMA1) || \ + ((LIST) == DMA2)) + +/****************** DMA1 remap bit field definition********************/ +/* DMA1 - Channel 1 */ +#define DMA1_CH1_DEFAULT (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */ +#define DMA1_CH1_ADC (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/ +#define DMA1_CH1_TIM17_CH1 (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */ +#define DMA1_CH1_TIM17_UP (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */ +#define DMA1_CH1_USART1_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART2_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART3_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART4_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART5_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART6_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART7_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */ +#define DMA1_CH1_USART8_RX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */ +/* DMA1 - Channel 2 */ +#define DMA1_CH2_DEFAULT (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */ +#define DMA1_CH2_ADC (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */ +#define DMA1_CH2_I2C1_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */ +#define DMA1_CH2_SPI1_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_SPI_1RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */ +#define DMA1_CH2_TIM1_CH1 (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */ +#define DMA1_CH2_TIM17_CH1 (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */ +#define DMA1_CH2_TIM17_UP (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */ +#define DMA1_CH2_USART1_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART2_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART3_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART4_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART5_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART6_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART7_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */ +#define DMA1_CH2_USART8_TX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */ +/* DMA1 - Channel 3 */ +#define DMA1_CH3_DEFAULT (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMAx */ +#define DMA1_CH3_TIM6_UP (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */ +#define DMA1_CH3_DAC_CH1 (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */ +#define DMA1_CH3_I2C1_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */ +#define DMA1_CH3_SPI1_TX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */ +#define DMA1_CH3_TIM1_CH2 (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */ +#define DMA1_CH3_TIM2_CH2 (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */ +#define DMA1_CH3_TIM16_CH1 (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */ +#define DMA1_CH3_TIM16_UP (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */ +#define DMA1_CH3_USART1_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART2_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART3_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART4_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART5_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART6_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART7_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */ +#define DMA1_CH3_USART8_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */ +/* DMA1 - Channel 4 */ +#define DMA1_CH4_DEFAULT (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */ +#define DMA1_CH4_TIM7_UP (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */ +#define DMA1_CH4_DAC_CH2 (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */ +#define DMA1_CH4_I2C2_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */ +#define DMA1_CH4_SPI2_RX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */ +#define DMA1_CH4_TIM2_CH4 (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */ +#define DMA1_CH4_TIM3_CH1 (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */ +#define DMA1_CH4_TIM3_TRIG (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */ +#define DMA1_CH4_TIM16_CH1 (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */ +#define DMA1_CH4_TIM16_UP (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */ +#define DMA1_CH4_USART1_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART2_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART3_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART4_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART5_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART6_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART7_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */ +#define DMA1_CH4_USART8_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */ +/* DMA1 - Channel 5 */ +#define DMA1_CH5_DEFAULT (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */ +#define DMA1_CH5_I2C2_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */ +#define DMA1_CH5_SPI2_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */ +#define DMA1_CH5_TIM1_CH3 (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */ +#define DMA1_CH5_USART1_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART2_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART3_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART4_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART5_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART6_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART7_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */ +#define DMA1_CH5_USART8_RX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */ +/* DMA1 - Channel 6 */ +#define DMA1_CH6_DEFAULT (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */ +#define DMA1_CH6_I2C1_TX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */ +#define DMA1_CH6_SPI2_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */ +#define DMA1_CH6_TIM1_CH1 (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */ +#define DMA1_CH6_TIM1_CH2 (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */ +#define DMA1_CH6_TIM1_CH3 (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */ +#define DMA1_CH6_TIM3_CH1 (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */ +#define DMA1_CH6_TIM3_TRIG (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */ +#define DMA1_CH6_TIM16_CH1 (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */ +#define DMA1_CH6_TIM16_UP (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */ +#define DMA1_CH6_USART1_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART2_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART3_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART4_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART5_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART6_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART7_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */ +#define DMA1_CH6_USART8_RX (uint32_t) (DMAx_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */ +/* DMA1 - Channel 7 */ +#define DMA1_CH7_DEFAULT (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */ +#define DMA1_CH7_I2C1_RX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */ +#define DMA1_CH7_SPI2_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */ +#define DMA1_CH7_TIM2_CH2 (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */ +#define DMA1_CH7_TIM2_CH4 (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */ +#define DMA1_CH7_TIM17_CH1 (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */ +#define DMA1_CH7_TIM17_UP (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */ +#define DMA1_CH7_USART1_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART2_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART3_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART4_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART5_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART6_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART7_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */ +#define DMA1_CH7_USART8_TX (uint32_t) (DMAx_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */ + +#define IS_DMA1_REMAP(REMAP) ((REMAP == DMA1_CH1_DEFAULT) ||\ + (REMAP == DMA1_CH1_ADC) ||\ + (REMAP == DMA1_CH1_TIM17_CH1) ||\ + (REMAP == DMA1_CH1_TIM17_UP) ||\ + (REMAP == DMA1_CH1_USART1_RX) ||\ + (REMAP == DMA1_CH1_USART2_RX) ||\ + (REMAP == DMA1_CH1_USART3_RX) ||\ + (REMAP == DMA1_CH1_USART4_RX) ||\ + (REMAP == DMA1_CH1_USART5_RX) ||\ + (REMAP == DMA1_CH1_USART6_RX) ||\ + (REMAP == DMA1_CH1_USART7_RX) ||\ + (REMAP == DMA1_CH1_USART8_RX) ||\ + (REMAP == DMA1_CH2_DEFAULT) ||\ + (REMAP == DMA1_CH2_ADC) ||\ + (REMAP == DMA1_CH2_I2C1_TX) ||\ + (REMAP == DMA1_CH2_SPI1_RX) ||\ + (REMAP == DMA1_CH2_TIM1_CH1) ||\ + (REMAP == DMA1_CH2_I2C1_TX) ||\ + (REMAP == DMA1_CH2_TIM17_CH1) ||\ + (REMAP == DMA1_CH2_TIM17_UP) ||\ + (REMAP == DMA1_CH2_USART1_TX) ||\ + (REMAP == DMA1_CH2_USART2_TX) ||\ + (REMAP == DMA1_CH2_USART3_TX) ||\ + (REMAP == DMA1_CH2_USART4_TX) ||\ + (REMAP == DMA1_CH2_USART5_TX) ||\ + (REMAP == DMA1_CH2_USART6_TX) ||\ + (REMAP == DMA1_CH2_USART7_TX) ||\ + (REMAP == DMA1_CH2_USART8_TX) ||\ + (REMAP == DMA1_CH3_DEFAULT) ||\ + (REMAP == DMA1_CH3_TIM6_UP) ||\ + (REMAP == DMA1_CH3_DAC_CH1) ||\ + (REMAP == DMA1_CH3_I2C1_RX) ||\ + (REMAP == DMA1_CH3_SPI1_TX) ||\ + (REMAP == DMA1_CH3_TIM1_CH2) ||\ + (REMAP == DMA1_CH3_TIM2_CH2) ||\ + (REMAP == DMA1_CH3_TIM16_CH1) ||\ + (REMAP == DMA1_CH3_TIM16_UP) ||\ + (REMAP == DMA1_CH3_USART1_RX) ||\ + (REMAP == DMA1_CH3_USART2_RX) ||\ + (REMAP == DMA1_CH3_USART3_RX) ||\ + (REMAP == DMA1_CH3_USART4_RX) ||\ + (REMAP == DMA1_CH3_USART5_RX) ||\ + (REMAP == DMA1_CH3_USART6_RX) ||\ + (REMAP == DMA1_CH3_USART7_RX) ||\ + (REMAP == DMA1_CH3_USART8_RX) ||\ + (REMAP == DMA1_CH4_DEFAULT) ||\ + (REMAP == DMA1_CH4_TIM7_UP) ||\ + (REMAP == DMA1_CH4_DAC_CH2) ||\ + (REMAP == DMA1_CH4_I2C2_TX) ||\ + (REMAP == DMA1_CH4_SPI2_RX) ||\ + (REMAP == DMA1_CH4_TIM2_CH4) ||\ + (REMAP == DMA1_CH4_TIM3_CH1) ||\ + (REMAP == DMA1_CH4_TIM3_TRIG) ||\ + (REMAP == DMA1_CH4_TIM16_CH1) ||\ + (REMAP == DMA1_CH4_TIM16_UP) ||\ + (REMAP == DMA1_CH4_USART1_TX) ||\ + (REMAP == DMA1_CH4_USART2_TX) ||\ + (REMAP == DMA1_CH4_USART3_TX) ||\ + (REMAP == DMA1_CH4_USART4_TX) ||\ + (REMAP == DMA1_CH4_USART5_TX) ||\ + (REMAP == DMA1_CH4_USART6_TX) ||\ + (REMAP == DMA1_CH4_USART7_TX) ||\ + (REMAP == DMA1_CH4_USART8_TX) ||\ + (REMAP == DMA1_CH5_DEFAULT) ||\ + (REMAP == DMA1_CH5_I2C2_RX) ||\ + (REMAP == DMA1_CH5_SPI2_TX) ||\ + (REMAP == DMA1_CH5_TIM1_CH3) ||\ + (REMAP == DMA1_CH5_USART1_RX) ||\ + (REMAP == DMA1_CH5_USART2_RX) ||\ + (REMAP == DMA1_CH5_USART3_RX) ||\ + (REMAP == DMA1_CH5_USART4_RX) ||\ + (REMAP == DMA1_CH5_USART5_RX) ||\ + (REMAP == DMA1_CH5_USART6_RX) ||\ + (REMAP == DMA1_CH5_USART7_RX) ||\ + (REMAP == DMA1_CH5_USART8_RX) ||\ + (REMAP == DMA1_CH6_DEFAULT) ||\ + (REMAP == DMA1_CH6_I2C1_TX) ||\ + (REMAP == DMA1_CH6_SPI2_RX) ||\ + (REMAP == DMA1_CH6_TIM1_CH1) ||\ + (REMAP == DMA1_CH6_TIM1_CH2) ||\ + (REMAP == DMA1_CH6_TIM1_CH3) ||\ + (REMAP == DMA1_CH6_TIM3_CH1) ||\ + (REMAP == DMA1_CH6_TIM3_TRIG) ||\ + (REMAP == DMA1_CH6_TIM16_CH1) ||\ + (REMAP == DMA1_CH6_TIM16_UP) ||\ + (REMAP == DMA1_CH6_USART1_RX) ||\ + (REMAP == DMA1_CH6_USART2_RX) ||\ + (REMAP == DMA1_CH6_USART3_RX) ||\ + (REMAP == DMA1_CH6_USART4_RX) ||\ + (REMAP == DMA1_CH6_USART5_RX) ||\ + (REMAP == DMA1_CH6_USART6_RX) ||\ + (REMAP == DMA1_CH6_USART7_RX) ||\ + (REMAP == DMA1_CH6_USART8_RX) ||\ + (REMAP == DMA1_CH7_DEFAULT) ||\ + (REMAP == DMA1_CH7_I2C1_RX) ||\ + (REMAP == DMA1_CH7_SPI2_TX) ||\ + (REMAP == DMA1_CH7_TIM2_CH2) ||\ + (REMAP == DMA1_CH7_TIM2_CH4) ||\ + (REMAP == DMA1_CH7_TIM17_CH1) ||\ + (REMAP == DMA1_CH7_TIM17_UP) ||\ + (REMAP == DMA1_CH7_USART1_TX) ||\ + (REMAP == DMA1_CH7_USART2_TX) ||\ + (REMAP == DMA1_CH7_USART3_TX) ||\ + (REMAP == DMA1_CH7_USART4_TX) ||\ + (REMAP == DMA1_CH7_USART5_TX) ||\ + (REMAP == DMA1_CH7_USART6_TX) ||\ + (REMAP == DMA1_CH7_USART7_TX) ||\ + (REMAP == DMA1_CH7_USART8_TX)) + +/****************** DMA2 remap bit field definition********************/ +/* DMA2 - Channel 1 */ +#define DMA2_CH1_DEFAULT (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */ +#define DMA2_CH1_I2C2_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */ +#define DMA2_CH1_USART1_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART2_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART3_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART4_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART5_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART6_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART7_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */ +#define DMA2_CH1_USART8_TX (uint32_t) (DMAx_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */ +/* DMA2 - Channel 2 */ +#define DMA2_CH2_DEFAULT (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */ +#define DMA2_CH2_I2C2_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART1_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART2_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART3_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART4_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART5_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART6_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART7_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */ +#define DMA2_CH2_USART8_RX (uint32_t) (DMAx_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */ +/* DMA2 - Channel 3 */ +#define DMA2_CH3_DEFAULT (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */ +#define DMA2_CH3_TIM6_UP (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */ +#define DMA2_CH3_DAC_CH1 (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */ +#define DMA2_CH3_SPI1_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART1_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART2_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART3_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART4_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART5_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART6_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART7_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */ +#define DMA2_CH3_USART8_RX (uint32_t) (DMAx_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */ +/* DMA2 - Channel 4 */ +#define DMA2_CH4_DEFAULT (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */ +#define DMA2_CH4_TIM7_UP (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */ +#define DMA2_CH4_DAC_CH2 (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */ +#define DMA2_CH4_SPI1_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART1_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART2_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART3_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART4_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART5_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART6_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART7_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */ +#define DMA2_CH4_USART8_TX (uint32_t) (DMAx_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */ +/* DMA2 - Channel 5 */ +#define DMA2_CH5_DEFAULT (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */ +#define DMA2_CH5_ADC (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */ +#define DMA2_CH5_USART1_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART2_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART3_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART4_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART5_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART6_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART7_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */ +#define DMA2_CH5_USART8_TX (uint32_t) (DMAx_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */ + +#define IS_DMA2_REMAP(REMAP) ((REMAP == DMA2_CH1_DEFAULT) ||\ + (REMAP == DMA2_CH1_I2C2_TX) ||\ + (REMAP == DMA2_CH1_USART1_TX) ||\ + (REMAP == DMA2_CH1_USART2_TX) ||\ + (REMAP == DMA2_CH1_USART3_TX) ||\ + (REMAP == DMA2_CH1_USART4_TX) ||\ + (REMAP == DMA2_CH1_USART5_TX) ||\ + (REMAP == DMA2_CH1_USART6_TX) ||\ + (REMAP == DMA2_CH1_USART7_TX) ||\ + (REMAP == DMA2_CH1_USART8_TX) ||\ + (REMAP == DMA2_CH2_DEFAULT) ||\ + (REMAP == DMA2_CH2_I2C2_RX) ||\ + (REMAP == DMA2_CH2_USART1_RX) ||\ + (REMAP == DMA2_CH2_USART2_RX) ||\ + (REMAP == DMA2_CH2_USART3_RX) ||\ + (REMAP == DMA2_CH2_USART4_RX) ||\ + (REMAP == DMA2_CH2_USART5_RX) ||\ + (REMAP == DMA2_CH2_USART6_RX) ||\ + (REMAP == DMA2_CH2_USART7_RX) ||\ + (REMAP == DMA2_CH2_USART8_RX) ||\ + (REMAP == DMA2_CH3_DEFAULT) ||\ + (REMAP == DMA2_CH3_TIM6_UP) ||\ + (REMAP == DMA2_CH3_DAC_CH1) ||\ + (REMAP == DMA2_CH3_SPI1_RX) ||\ + (REMAP == DMA2_CH3_USART1_RX) ||\ + (REMAP == DMA2_CH3_USART2_RX) ||\ + (REMAP == DMA2_CH3_USART3_RX) ||\ + (REMAP == DMA2_CH3_USART4_RX) ||\ + (REMAP == DMA2_CH3_USART5_RX) ||\ + (REMAP == DMA2_CH3_USART6_RX) ||\ + (REMAP == DMA2_CH3_USART7_RX) ||\ + (REMAP == DMA2_CH3_USART8_RX) ||\ + (REMAP == DMA2_CH4_DEFAULT) ||\ + (REMAP == DMA2_CH4_TIM7_UP) ||\ + (REMAP == DMA2_CH4_DAC_CH2) ||\ + (REMAP == DMA2_CH4_SPI1_TX) ||\ + (REMAP == DMA2_CH4_USART1_TX) ||\ + (REMAP == DMA2_CH4_USART2_TX) ||\ + (REMAP == DMA2_CH4_USART3_TX) ||\ + (REMAP == DMA2_CH4_USART4_TX) ||\ + (REMAP == DMA2_CH4_USART5_TX) ||\ + (REMAP == DMA2_CH4_USART6_TX) ||\ + (REMAP == DMA2_CH4_USART7_TX) ||\ + (REMAP == DMA2_CH4_USART8_TX) ||\ + (REMAP == DMA2_CH5_DEFAULT) ||\ + (REMAP == DMA2_CH5_ADC) ||\ + (REMAP == DMA2_CH5_USART1_TX) ||\ + (REMAP == DMA2_CH5_USART2_TX) ||\ + (REMAP == DMA2_CH5_USART3_TX) ||\ + (REMAP == DMA2_CH5_USART4_TX) ||\ + (REMAP == DMA2_CH5_USART5_TX) ||\ + (REMAP == DMA2_CH5_USART6_TX) ||\ + (REMAP == DMA2_CH5_USART7_TX) ||\ + (REMAP == DMA2_CH5_USART8_TX )) + +/** + * @} + */ + +/** @defgroup DMA_interrupts_definition + * @{ + */ + +#define DMA_IT_TC DMA_CCR_TCIE +#define DMA_IT_HT DMA_CCR_HTIE +#define DMA_IT_TE DMA_CCR_TEIE + +#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) + +#define DMA1_IT_GL1 DMA_ISR_GIF1 +#define DMA1_IT_TC1 DMA_ISR_TCIF1 +#define DMA1_IT_HT1 DMA_ISR_HTIF1 +#define DMA1_IT_TE1 DMA_ISR_TEIF1 +#define DMA1_IT_GL2 DMA_ISR_GIF2 +#define DMA1_IT_TC2 DMA_ISR_TCIF2 +#define DMA1_IT_HT2 DMA_ISR_HTIF2 +#define DMA1_IT_TE2 DMA_ISR_TEIF2 +#define DMA1_IT_GL3 DMA_ISR_GIF3 +#define DMA1_IT_TC3 DMA_ISR_TCIF3 +#define DMA1_IT_HT3 DMA_ISR_HTIF3 +#define DMA1_IT_TE3 DMA_ISR_TEIF3 +#define DMA1_IT_GL4 DMA_ISR_GIF4 +#define DMA1_IT_TC4 DMA_ISR_TCIF4 +#define DMA1_IT_HT4 DMA_ISR_HTIF4 +#define DMA1_IT_TE4 DMA_ISR_TEIF4 +#define DMA1_IT_GL5 DMA_ISR_GIF5 +#define DMA1_IT_TC5 DMA_ISR_TCIF5 +#define DMA1_IT_HT5 DMA_ISR_HTIF5 +#define DMA1_IT_TE5 DMA_ISR_TEIF5 +#define DMA1_IT_GL6 DMA_ISR_GIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_TC6 DMA_ISR_TCIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_HT6 DMA_ISR_HTIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_TE6 DMA_ISR_TEIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_GL7 DMA_ISR_GIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_TC7 DMA_ISR_TCIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_HT7 DMA_ISR_HTIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_IT_TE7 DMA_ISR_TEIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ + +#define DMA2_IT_GL1 ((uint32_t)0x10000001) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TC1 ((uint32_t)0x10000002) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_HT1 ((uint32_t)0x10000004) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TE1 ((uint32_t)0x10000008) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_GL2 ((uint32_t)0x10000010) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TC2 ((uint32_t)0x10000020) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_HT2 ((uint32_t)0x10000040) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TE2 ((uint32_t)0x10000080) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_GL3 ((uint32_t)0x10000100) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TC3 ((uint32_t)0x10000200) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_HT3 ((uint32_t)0x10000400) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TE3 ((uint32_t)0x10000800) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_GL4 ((uint32_t)0x10001000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TC4 ((uint32_t)0x10002000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_HT4 ((uint32_t)0x10004000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TE4 ((uint32_t)0x10008000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_GL5 ((uint32_t)0x10010000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TC5 ((uint32_t)0x10020000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_HT5 ((uint32_t)0x10040000) /*!< Only applicable for STM32F091 devices */ +#define DMA2_IT_TE5 ((uint32_t)0x10080000) /*!< Only applicable for STM32F091 devices */ + +#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) + +#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ + ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ + ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ + ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ + ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ + ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ + ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ + ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ + ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ + ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ + ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ + ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ + ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ + ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ + ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ + ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ + ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ + ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ + ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ + ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ + ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ + ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ + ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ + ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) + +/** + * @} + */ + +/** @defgroup DMA_flags_definition + * @{ + */ +#define DMA1_FLAG_GL1 DMA_ISR_GIF1 +#define DMA1_FLAG_TC1 DMA_ISR_TCIF1 +#define DMA1_FLAG_HT1 DMA_ISR_HTIF1 +#define DMA1_FLAG_TE1 DMA_ISR_TEIF1 +#define DMA1_FLAG_GL2 DMA_ISR_GIF2 +#define DMA1_FLAG_TC2 DMA_ISR_TCIF2 +#define DMA1_FLAG_HT2 DMA_ISR_HTIF2 +#define DMA1_FLAG_TE2 DMA_ISR_TEIF2 +#define DMA1_FLAG_GL3 DMA_ISR_GIF3 +#define DMA1_FLAG_TC3 DMA_ISR_TCIF3 +#define DMA1_FLAG_HT3 DMA_ISR_HTIF3 +#define DMA1_FLAG_TE3 DMA_ISR_TEIF3 +#define DMA1_FLAG_GL4 DMA_ISR_GIF4 +#define DMA1_FLAG_TC4 DMA_ISR_TCIF4 +#define DMA1_FLAG_HT4 DMA_ISR_HTIF4 +#define DMA1_FLAG_TE4 DMA_ISR_TEIF4 +#define DMA1_FLAG_GL5 DMA_ISR_GIF5 +#define DMA1_FLAG_TC5 DMA_ISR_TCIF5 +#define DMA1_FLAG_HT5 DMA_ISR_HTIF5 +#define DMA1_FLAG_TE5 DMA_ISR_TEIF5 +#define DMA1_FLAG_GL6 DMA_ISR_GIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_TC6 DMA_ISR_TCIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_HT6 DMA_ISR_HTIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_TE6 DMA_ISR_TEIF6 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_GL7 DMA_ISR_GIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_TC7 DMA_ISR_TCIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_HT7 DMA_ISR_HTIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_FLAG_TE7 DMA_ISR_TEIF7 /*!< Only applicable for STM32F072 and STM32F091 devices */ + +#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) +#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) +#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) +#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) +#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) +#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) +#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) +#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) +#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) +#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) +#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) +#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) +#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) +#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) +#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) +#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) +#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) +#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) +#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) +#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) + +#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ + ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ + ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ + ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ + ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ + ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ + ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ + ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ + ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ + ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ + ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ + ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ + ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ + ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ + ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ + ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ + ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ + ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ + ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ + ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ + ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ + ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ + ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ + ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) +/** + * @} + */ + +/** @defgroup DMA_Buffer_Size + * @{ + */ + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the DMA configuration to the default reset state ******/ +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); + +/* Initialization and Configuration functions *********************************/ +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); +void DMA_RemapConfig(DMA_TypeDef* DMAy, uint32_t DMAx_CHy_RemapRequest); + +/* Data Counter functions******************************************************/ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); + +/* Interrupts and flags management functions **********************************/ +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); +void DMA_ClearFlag(uint32_t DMAy_FLAG); +ITStatus DMA_GetITStatus(uint32_t DMAy_IT); +void DMA_ClearITPendingBit(uint32_t DMAy_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_DMA_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_exti.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_exti.h new file mode 100644 index 0000000..520b510 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_exti.h @@ -0,0 +1,208 @@ +/** + ****************************************************************************** + * @file stm32f0xx_exti.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the EXTI + * firmware library + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_EXTI_H +#define __STM32F0XX_EXTI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief EXTI mode enumeration + */ + +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +}EXTIMode_TypeDef; + +#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) + +/** + * @brief EXTI Trigger enumeration + */ + +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +}EXTITrigger_TypeDef; + +#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ + ((TRIGGER) == EXTI_Trigger_Falling) || \ + ((TRIGGER) == EXTI_Trigger_Rising_Falling)) +/** + * @brief EXTI Init Structure definition + */ + +typedef struct +{ + uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +}EXTI_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Constants + * @{ + */ +/** @defgroup EXTI_Lines + * @{ + */ + +#define EXTI_Line0 ((uint32_t)0x00000001) /*!< External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00000002) /*!< External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00000004) /*!< External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00000008) /*!< External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00000010) /*!< External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00000020) /*!< External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00000040) /*!< External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00000080) /*!< External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00000100) /*!< External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00000200) /*!< External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00000400) /*!< External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00000800) /*!< External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x00001000) /*!< External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x00002000) /*!< External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x00004000) /*!< External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x00008000) /*!< External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x00010000) /*!< External interrupt line 16 + Connected to the PVD Output, + not applicable for STM32F030 devices */ +#define EXTI_Line17 ((uint32_t)0x00020000) /*!< Internal interrupt line 17 + Connected to the RTC Alarm + event */ +#define EXTI_Line18 ((uint32_t)0x00040000) /*!< Internal interrupt line 18 + Connected to the USB + event, only applicable for + STM32F072 devices */ +#define EXTI_Line19 ((uint32_t)0x00080000) /*!< Internal interrupt line 19 + Connected to the RTC Tamper + and Time Stamp events */ +#define EXTI_Line20 ((uint32_t)0x00100000) /*!< Internal interrupt line 20 + Connected to the RTC wakeup + event, only applicable for + STM32F072 devices */ +#define EXTI_Line21 ((uint32_t)0x00200000) /*!< Internal interrupt line 21 + Connected to the Comparator 1 + event, only applicable for STM32F051 + ans STM32F072 devices */ +#define EXTI_Line22 ((uint32_t)0x00400000) /*!< Internal interrupt line 22 + Connected to the Comparator 2 + event, only applicable for STM32F051 + and STM32F072 devices */ +#define EXTI_Line23 ((uint32_t)0x00800000) /*!< Internal interrupt line 23 + Connected to the I2C1 wakeup + event, not applicable for STM32F030 devices */ +#define EXTI_Line25 ((uint32_t)0x02000000) /*!< Internal interrupt line 25 + Connected to the USART1 wakeup + event, not applicable for STM32F030 devices */ +#define EXTI_Line26 ((uint32_t)0x04000000) /*!< Internal interrupt line 26 + Connected to the USART2 wakeup + event, applicable only for + STM32F072 devices */ +#define EXTI_Line27 ((uint32_t)0x08000000) /*!< Internal interrupt line 27 + Connected to the CEC wakeup + event, applicable only for STM32F051 + and STM32F072 devices */ +#define EXTI_Line31 ((uint32_t)0x80000000) /*!< Internal interrupt line 31 + Connected to the VDD USB monitor + event, applicable only for + STM32F072 devices */ +#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0x71000000) == 0x00) && ((LINE) != (uint16_t)0x00)) + +#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ + ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ + ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ + ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ + ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ + ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ + ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ + ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ + ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ + ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \ + ((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) || \ + ((LINE) == EXTI_Line22) || ((LINE) == EXTI_Line23) || \ + ((LINE) == EXTI_Line25) || ((LINE) == EXTI_Line26) || \ + ((LINE) == EXTI_Line27) || ((LINE) == EXTI_Line31)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Function used to set the EXTI configuration to the default reset state *****/ +void EXTI_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); + +/* Interrupts and flags management functions **********************************/ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_EXTI_H */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_flash.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_flash.h new file mode 100644 index 0000000..f734b07 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_flash.h @@ -0,0 +1,427 @@ +/** + ****************************************************************************** + * @file stm32f0xx_flash.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_FLASH_H +#define __STM32F0XX_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief FLASH Status + */ +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_WRP, + FLASH_ERROR_PROGRAM, + FLASH_COMPLETE, + FLASH_TIMEOUT +}FLASH_Status; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup FLASH_Latency + * @{ + */ +#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */ + +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1)) +/** + * @} + */ + +/** @defgroup FLASH_Interrupts + * @{ + */ + +#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of programming interrupt source */ +#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +/** + * @} + */ + +/** @defgroup FLASH_Address + * @{ + */ +#if defined(STM32F042) || defined(STM32F031) || defined(STM32F070x6) /*32K devices */ + #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x08007FFF)) +#elif defined(STM32F030) || defined(STM32F051) /*64K devices */ + #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF)) +#elif defined(STM32F072) || defined(STM32F070xB) /*128K devices */ + #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0801FFFF)) +#else /* STM32F091 || STM32F030 || STM32F030xC */ /*256K Flash devices */ + #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF)) +#endif /* STM32F042 || STM32F031 || STM32F070x6 */ +/** + * @} + */ + +/** @defgroup FLASH_OB_DATA_ADDRESS + * @{ + */ +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_Write_Protection + * @{ + */ + +#if !defined (STM32F072) && !defined (STM32F070xB) && !defined (STM32F091) && !defined (STM32F030) && !defined (STM32F030xC) /* 32K and 64K Flash devices */ +#define OB_WRP_Pages0to3 ((uint32_t)0x00000001) /* Write protection of page 0 to 3 */ +#define OB_WRP_Pages4to7 ((uint32_t)0x00000002) /* Write protection of page 4 to 7 */ +#define OB_WRP_Pages8to11 ((uint32_t)0x00000004) /* Write protection of page 8 to 11 */ +#define OB_WRP_Pages12to15 ((uint32_t)0x00000008) /* Write protection of page 12 to 15 */ +#define OB_WRP_Pages16to19 ((uint32_t)0x00000010) /* Write protection of page 16 to 19 */ +#define OB_WRP_Pages20to23 ((uint32_t)0x00000020) /* Write protection of page 20 to 23 */ +#define OB_WRP_Pages24to27 ((uint32_t)0x00000040) /* Write protection of page 24 to 27 */ +#define OB_WRP_Pages28to31 ((uint32_t)0x00000080) /* Write protection of page 28 to 31 */ +#define OB_WRP_Pages32to35 ((uint32_t)0x00000100) /* Write protection of page 32 to 35 */ +#define OB_WRP_Pages36to39 ((uint32_t)0x00000200) /* Write protection of page 36 to 39 */ +#define OB_WRP_Pages40to43 ((uint32_t)0x00000400) /* Write protection of page 40 to 43 */ +#define OB_WRP_Pages44to47 ((uint32_t)0x00000800) /* Write protection of page 44 to 47 */ +#define OB_WRP_Pages48to51 ((uint32_t)0x00001000) /* Write protection of page 48 to 51 */ +#define OB_WRP_Pages52to55 ((uint32_t)0x00002000) /* Write protection of page 52 to 55 */ +#define OB_WRP_Pages56to59 ((uint32_t)0x00004000) /* Write protection of page 56 to 59 */ +#define OB_WRP_Pages60to63 ((uint32_t)0x00008000) /* Write protection of page 60 to 63 */ + +#define OB_WRP_AllPages ((uint32_t)0x0000FFFF) /*!< Write protection of all Sectors */ + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000)) + +#else /* 128K and 256K Flash devices */ + +#define OB_WRP_Pages0to1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */ +#define OB_WRP_Pages2to3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */ +#define OB_WRP_Pages4to5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */ +#define OB_WRP_Pages6to7 ((uint32_t)0x00000008) /* Write protection of page 6 to 7 */ +#define OB_WRP_Pages8to9 ((uint32_t)0x00000010) /* Write protection of page 8 to 9 */ +#define OB_WRP_Pages10to11 ((uint32_t)0x00000020) /* Write protection of page 10 to 11 */ +#define OB_WRP_Pages12to13 ((uint32_t)0x00000040) /* Write protection of page 12 to 13 */ +#define OB_WRP_Pages14to15 ((uint32_t)0x00000080) /* Write protection of page 14 to 15 */ +#define OB_WRP_Pages16to17 ((uint32_t)0x00000100) /* Write protection of page 16 to 17 */ +#define OB_WRP_Pages18to19 ((uint32_t)0x00000200) /* Write protection of page 18 to 19 */ +#define OB_WRP_Pages20to21 ((uint32_t)0x00000400) /* Write protection of page 20 to 21 */ +#define OB_WRP_Pages22to23 ((uint32_t)0x00000800) /* Write protection of page 22 to 23 */ +#define OB_WRP_Pages24to25 ((uint32_t)0x00001000) /* Write protection of page 24 to 25 */ +#define OB_WRP_Pages26to27 ((uint32_t)0x00002000) /* Write protection of page 26 to 27 */ +#define OB_WRP_Pages28to29 ((uint32_t)0x00004000) /* Write protection of page 28 to 29 */ +#define OB_WRP_Pages30to31 ((uint32_t)0x00008000) /* Write protection of page 30 to 31 */ +#define OB_WRP_Pages32to33 ((uint32_t)0x00010000) /* Write protection of page 32 to 33 */ +#define OB_WRP_Pages34to35 ((uint32_t)0x00020000) /* Write protection of page 34 to 35 */ +#define OB_WRP_Pages36to37 ((uint32_t)0x00040000) /* Write protection of page 36 to 37 */ +#define OB_WRP_Pages38to39 ((uint32_t)0x00080000) /* Write protection of page 38 to 39 */ +#define OB_WRP_Pages40to41 ((uint32_t)0x00100000) /* Write protection of page 40 to 41 */ +#define OB_WRP_Pages42to43 ((uint32_t)0x00200000) /* Write protection of page 42 to 43 */ +#define OB_WRP_Pages44to45 ((uint32_t)0x00400000) /* Write protection of page 44 to 45 */ +#define OB_WRP_Pages46to47 ((uint32_t)0x00800000) /* Write protection of page 46 to 47 */ +#define OB_WRP_Pages48to49 ((uint32_t)0x01000000) /* Write protection of page 48 to 49 */ +#define OB_WRP_Pages50to51 ((uint32_t)0x02000000) /* Write protection of page 50 to 51 */ +#define OB_WRP_Pages52to53 ((uint32_t)0x04000000) /* Write protection of page 52 to 53 */ +#define OB_WRP_Pages54to55 ((uint32_t)0x08000000) /* Write protection of page 54 to 55 */ +#define OB_WRP_Pages56to57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */ +#define OB_WRP_Pages58to59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */ +#define OB_WRP_Pages60to61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */ + +#if defined(STM32F091) || defined(STM32F030xC) /* 256K Flash devices */ +#define OB_WRP_Pages62to127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */ +#else /* 128K Flash devices */ +#define OB_WRP_Pages62to63 ((uint32_t)0x80000000) /* Write protection of page 62 to 63 */ +#endif /* STM32F091 || STM32F030xC */ +#define OB_WRP_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Sectors */ +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000)) + +#endif /* STM32F072 || STM32F070xB || STM32F091 || STM32F030 || STM32F030xC */ +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_Read_Protection + * @{ + */ + +/** + * @brief FLASH_Read Protection Level + */ +#define OB_RDP_Level_0 ((uint8_t)0xAA) +#define OB_RDP_Level_1 ((uint8_t)0xBB) +/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /* Warning: When enabling read protection level 2 + it's no more possible to go back to level 1 or 0 */ + +#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\ + ((LEVEL) == OB_RDP_Level_1))/*||\ + ((LEVEL) == OB_RDP_Level_2))*/ +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint8_t)0x01) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_nRST_STOP + * @{ + */ + +#define OB_STOP_NoRST ((uint8_t)0x02) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_nRST_STDBY + * @{ + */ + +#define OB_STDBY_NoRST ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_BOOT1 + * @{ + */ + +#define OB_BOOT1_RESET ((uint8_t)0x00) /*!< BOOT1 Reset */ +#define OB_BOOT1_SET ((uint8_t)0x10) /*!< BOOT1 Set */ +#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_BOOT0 + * @{ + */ + +#define OB_BOOT0_RESET ((uint8_t)0x00) /*!< BOOT0 Reset */ +#define OB_BOOT0_SET ((uint8_t)0x08) /*!< BOOT0 Set */ +#define IS_OB_BOOT0(BOOT0) (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_BOOT0SW + * @{ + */ + +#define OB_BOOT0_SW ((uint8_t)0x00) /*!< BOOT0 pin disabled */ +#define OB_BOOT0_HW ((uint8_t)0x80) /*!< BOOT0 pin bonded with GPIO */ +#define IS_OB_BOOT0SW(BOOT0) (((BOOT0) == OB_BOOT0_SW) || ((BOOT0) == OB_BOOT0_HW)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_VDDA_Analog_Monitoring + * @{ + */ + +#define OB_VDDA_ANALOG_ON ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */ +#define OB_VDDA_ANALOG_OFF ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */ + +#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF)) + +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_SRAM_Parity_Enable + * @{ + */ + +#define OB_SRAM_PARITY_SET ((uint8_t)0x00) /*!< SRAM parity enable Set */ +#define OB_SRAM_PARITY_RESET ((uint8_t)0x40) /*!< SRAM parity enable reset */ + +#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET)) + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ + +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ +#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Programming flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCB) == 0x00000000) && ((FLAG) != 0x00000000)) + +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_PGERR) || \ + ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_EOP)) +/** + * @} + */ + +/** @defgroup FLASH_Timeout_definition + * @{ + */ +#define FLASH_ER_PRG_TIMEOUT ((uint32_t)0x000B0000) + +/** + * @} + */ + +/** @defgroup FLASH_Legacy + * @{ + */ +#define FLASH_WRProt_Pages0to3 OB_WRP_Pages0to3 +#define FLASH_WRProt_Pages4to7 OB_WRP_Pages4to7 +#define FLASH_WRProt_Pages8to11 OB_WRP_Pages8to11 +#define FLASH_WRProt_Pages12to15 OB_WRP_Pages12to15 +#define FLASH_WRProt_Pages16to19 OB_WRP_Pages16to19 +#define FLASH_WRProt_Pages20to23 OB_WRP_Pages20to23 +#define FLASH_WRProt_Pages24to27 OB_WRP_Pages24to27 +#define FLASH_WRProt_Pages28to31 OB_WRP_Pages28to31 +#define FLASH_WRProt_Pages32to35 OB_WRP_Pages32to35 +#define FLASH_WRProt_Pages36to39 OB_WRP_Pages36to39 +#define FLASH_WRProt_Pages40to43 OB_WRP_Pages40to21 +#define FLASH_WRProt_Pages44to47 OB_WRP_Pages44to23 +#define FLASH_WRProt_Pages48to51 OB_WRP_Pages48to51 +#define FLASH_WRProt_Pages52to55 OB_WRP_Pages52to55 +#define FLASH_WRProt_Pages56to59 OB_WRP_Pages56to59 +#define FLASH_WRProt_Pages60to63 OB_WRP_Pages60to63 + + +#define FLASH_WRProt_AllPages OB_WRP_AllPages +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/** + * @brief FLASH memory functions that can be executed from FLASH. + */ +/* FLASH Interface configuration functions ************************************/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_PrefetchBufferCmd(FunctionalState NewState); +FlagStatus FLASH_GetPrefetchBufferStatus(void); + +/* FLASH Memory Programming functions *****************************************/ +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_EraseAllPages(void); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); + +/* FLASH Option Bytes Programming functions *****************************************/ +void FLASH_OB_Unlock(void); +void FLASH_OB_Lock(void); +void FLASH_OB_Launch(void); +FLASH_Status FLASH_OB_Erase(void); +FLASH_Status FLASH_OB_EnableWRP(uint32_t OB_WRP); +FLASH_Status FLASH_OB_RDPConfig(uint8_t OB_RDP); +FLASH_Status FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY); +FLASH_Status FLASH_OB_BOOTConfig(uint8_t OB_BOOT1); +FLASH_Status FLASH_OB_BOOT0Config(uint8_t OB_BOOT0); +FLASH_Status FLASH_OB_BOOT0SWConfig(uint8_t OB_BOOT0SW); +FLASH_Status FLASH_OB_VDDAConfig(uint8_t OB_VDDA_ANALOG); +FLASH_Status FLASH_OB_SRAMParityConfig(uint8_t OB_SRAM_Parity); +FLASH_Status FLASH_OB_WriteUser(uint8_t OB_USER); +FLASH_Status FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); +uint8_t FLASH_OB_GetUser(void); +uint32_t FLASH_OB_GetWRP(void); +FlagStatus FLASH_OB_GetRDP(void); + +/* FLASH Interrupts and flags management functions **********************************/ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); + +/** @defgroup FLASH_Legacy + * @{ + */ +#define FLASH_EraseOptionBytes FLASH_OB_Erase +#define FLASH_EnableWriteProtection FLASH_OB_EnableWRP +#define FLASH_UserOptionByteConfig FLASH_OB_UserConfig +#define FLASH_ProgramOptionByteData FLASH_OB_ProgramData +#define FLASH_GetUserOptionByte FLASH_OB_GetUser +#define FLASH_GetWriteProtectionOptionByte FLASH_OB_GetWRP + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_FLASH_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_gpio.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_gpio.h new file mode 100644 index 0000000..737f093 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_gpio.h @@ -0,0 +1,350 @@ +/** + ****************************************************************************** + * @file stm32f0xx_gpio.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the GPIO + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_GPIO_H +#define __STM32F0XX_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ +/* Exported types ------------------------------------------------------------*/ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOF)) + +#define IS_GPIO_LIST_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB)) + +/** @defgroup Configuration_Mode_enumeration + * @{ + */ +typedef enum +{ + GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */ + GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */ + GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */ + GPIO_Mode_AN = 0x03 /*!< GPIO Analog In/Out Mode */ +}GPIOMode_TypeDef; + +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN)|| ((MODE) == GPIO_Mode_OUT) || \ + ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN)) +/** + * @} + */ + +/** @defgroup Output_type_enumeration + * @{ + */ +typedef enum +{ + GPIO_OType_PP = 0x00, + GPIO_OType_OD = 0x01 +}GPIOOType_TypeDef; + +#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD)) + +/** + * @} + */ + +/** @defgroup Output_Maximum_frequency_enumeration + * @{ + */ +typedef enum +{ + GPIO_Speed_Level_1 = 0x00, /*!< I/O output speed: Low 2 MHz */ + GPIO_Speed_Level_2 = 0x01, /*!< I/O output speed: Medium 10 MHz */ + GPIO_Speed_Level_3 = 0x03 /*!< I/O output speed: High 50 MHz */ +}GPIOSpeed_TypeDef; + +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_Level_1) || ((SPEED) == GPIO_Speed_Level_2) || \ + ((SPEED) == GPIO_Speed_Level_3)) +/** + * @} + */ + +/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration + * @{ + */ +typedef enum +{ + GPIO_PuPd_NOPULL = 0x00, + GPIO_PuPd_UP = 0x01, + GPIO_PuPd_DOWN = 0x02 +}GPIOPuPd_TypeDef; + +#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \ + ((PUPD) == GPIO_PuPd_DOWN)) +/** + * @} + */ + +/** @defgroup Bit_SET_and_Bit_RESET_enumeration + * @{ + */ +typedef enum +{ + Bit_RESET = 0, + Bit_SET +}BitAction; + +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) +/** + * @} + */ + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIOOType_TypeDef */ + + GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIOPuPd_TypeDef */ +}GPIO_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ +#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00) + +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) + +/** + * @} + */ + +/** @defgroup GPIO_Pin_sources + * @{ + */ +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) +/** + * @} + */ + +/** @defgroup GPIO_Alternate_function_selection_define + * @{ + */ + +/** + * @brief AF 0 selection + */ +#define GPIO_AF_0 ((uint8_t)0x00) /* WKUP, EVENTOUT, TIM15, SPI1, TIM17, + MCO, SWDAT, SWCLK, TIM14, BOOT, + USART1, CEC, IR_OUT, SPI2, TS, TIM3, + USART4, CAN, TIM3, USART2, USART3, + CRS, TIM16, TIM1 */ +/** + * @brief AF 1 selection + */ +#define GPIO_AF_1 ((uint8_t)0x01) /* USART2, CEC, TIM3, USART1, IR, + EVENTOUT, I2C1, I2C2, TIM15, SPI2, + USART3, TS, SPI1 */ +/** + * @brief AF 2 selection + */ +#define GPIO_AF_2 ((uint8_t)0x02) /* TIM2, TIM1, EVENTOUT, TIM16, TIM17, + USB */ +/** + * @brief AF 3 selection + */ +#define GPIO_AF_3 ((uint8_t)0x03) /* TS, I2C1, TIM15, EVENTOUT */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF_4 ((uint8_t)0x04) /* TIM14, USART4, USART3, CRS, CAN, + I2C1 */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF_5 ((uint8_t)0x05) /* TIM16, TIM17, TIM15, SPI2, I2C2, + MCO, I2C1, USB */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF_6 ((uint8_t)0x06) /* EVENTOUT */ +/** + * @brief AF 7 selection + */ +#define GPIO_AF_7 ((uint8_t)0x07) /* COMP1 OUT and COMP2 OUT */ + +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_0) || ((AF) == GPIO_AF_1) || \ + ((AF) == GPIO_AF_2) || ((AF) == GPIO_AF_3) || \ + ((AF) == GPIO_AF_4) || ((AF) == GPIO_AF_5) || \ + ((AF) == GPIO_AF_6) || ((AF) == GPIO_AF_7)) + +/** + * @} + */ + +/** @defgroup GPIO_Speed_Legacy + * @{ + */ + +#define GPIO_Speed_2MHz GPIO_Speed_Level_1 /*!< I/O output speed: Low 2 MHz */ +#define GPIO_Speed_10MHz GPIO_Speed_Level_2 /*!< I/O output speed: Medium 10 MHz */ +#define GPIO_Speed_50MHz GPIO_Speed_Level_3 /*!< I/O output speed: High 50 MHz */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Function used to set the GPIO configuration to the default reset state *****/ +void GPIO_DeInit(GPIO_TypeDef* GPIOx); + +/* Initialization and Configuration functions *********************************/ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); + +/* GPIO Read and Write functions **********************************************/ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); + +/* GPIO Alternate functions configuration functions ***************************/ +void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_GPIO_H */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_i2c.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_i2c.h new file mode 100644 index 0000000..d057371 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_i2c.h @@ -0,0 +1,470 @@ +/** + ****************************************************************************** + * @file stm32f0xx_i2c.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the I2C firmware + * library + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_I2C_H +#define __STM32F0XX_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief I2C Init structure definition + */ + +typedef struct +{ + uint32_t I2C_Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter must be set by referring to I2C_Timing_Config_Tool*/ + + uint32_t I2C_AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_Analog_Filter*/ + + uint32_t I2C_DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between 0x00 and 0x0F*/ + + uint32_t I2C_Mode; /*!< Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode*/ + + uint32_t I2C_OwnAddress1; /*!< Specifies the device own address 1. + This parameter can be a 7-bit or 10-bit address*/ + + uint32_t I2C_Ack; /*!< Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement*/ + + uint32_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address*/ +}I2C_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup I2C_Exported_Constants + * @{ + */ + +#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ + ((PERIPH) == I2C2)) + +#define IS_I2C_1_PERIPH(PERIPH) ((PERIPH) == I2C1) + +/** @defgroup I2C_Analog_Filter + * @{ + */ + +#define I2C_AnalogFilter_Enable ((uint32_t)0x00000000) +#define I2C_AnalogFilter_Disable I2C_CR1_ANFOFF + +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_AnalogFilter_Enable) || \ + ((FILTER) == I2C_AnalogFilter_Disable)) +/** + * @} + */ + +/** @defgroup I2C_Digital_Filter + * @{ + */ + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F) +/** + * @} + */ + +/** @defgroup I2C_mode + * @{ + */ + +#define I2C_Mode_I2C ((uint32_t)0x00000000) +#define I2C_Mode_SMBusDevice I2C_CR1_SMBDEN +#define I2C_Mode_SMBusHost I2C_CR1_SMBHEN + +#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ + ((MODE) == I2C_Mode_SMBusDevice) || \ + ((MODE) == I2C_Mode_SMBusHost)) +/** + * @} + */ + +/** @defgroup I2C_acknowledgement + * @{ + */ + +#define I2C_Ack_Enable ((uint32_t)0x00000000) +#define I2C_Ack_Disable I2C_CR2_NACK + +#define IS_I2C_ACK(ACK) (((ACK) == I2C_Ack_Enable) || \ + ((ACK) == I2C_Ack_Disable)) +/** + * @} + */ + +/** @defgroup I2C_acknowledged_address + * @{ + */ + +#define I2C_AcknowledgedAddress_7bit ((uint32_t)0x00000000) +#define I2C_AcknowledgedAddress_10bit I2C_OAR1_OA1MODE + +#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ + ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) +/** + * @} + */ + +/** @defgroup I2C_own_address1 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF) +/** + * @} + */ + +/** @defgroup I2C_transfer_direction + * @{ + */ + +#define I2C_Direction_Transmitter ((uint16_t)0x0000) +#define I2C_Direction_Receiver ((uint16_t)0x0400) + +#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ + ((DIRECTION) == I2C_Direction_Receiver)) +/** + * @} + */ + +/** @defgroup I2C_DMA_transfer_requests + * @{ + */ + +#define I2C_DMAReq_Tx I2C_CR1_TXDMAEN +#define I2C_DMAReq_Rx I2C_CR1_RXDMAEN + +#define IS_I2C_DMA_REQ(REQ) ((((REQ) & (uint32_t)0xFFFF3FFF) == 0x00) && ((REQ) != 0x00)) +/** + * @} + */ + +/** @defgroup I2C_slave_address + * @{ + */ + +#define IS_I2C_SLAVE_ADDRESS(ADDRESS) ((ADDRESS) <= (uint16_t)0x03FF) +/** + * @} + */ + + +/** @defgroup I2C_own_address2 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF) + +/** + * @} + */ + +/** @defgroup I2C_own_address2_mask + * @{ + */ + +#define I2C_OA2_NoMask ((uint8_t)0x00) +#define I2C_OA2_Mask01 ((uint8_t)0x01) +#define I2C_OA2_Mask02 ((uint8_t)0x02) +#define I2C_OA2_Mask03 ((uint8_t)0x03) +#define I2C_OA2_Mask04 ((uint8_t)0x04) +#define I2C_OA2_Mask05 ((uint8_t)0x05) +#define I2C_OA2_Mask06 ((uint8_t)0x06) +#define I2C_OA2_Mask07 ((uint8_t)0x07) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NoMask) || \ + ((MASK) == I2C_OA2_Mask01) || \ + ((MASK) == I2C_OA2_Mask02) || \ + ((MASK) == I2C_OA2_Mask03) || \ + ((MASK) == I2C_OA2_Mask04) || \ + ((MASK) == I2C_OA2_Mask05) || \ + ((MASK) == I2C_OA2_Mask06) || \ + ((MASK) == I2C_OA2_Mask07)) + +/** + * @} + */ + +/** @defgroup I2C_timeout + * @{ + */ + +#define IS_I2C_TIMEOUT(TIMEOUT) ((TIMEOUT) <= (uint16_t)0x0FFF) + +/** + * @} + */ + +/** @defgroup I2C_registers + * @{ + */ + +#define I2C_Register_CR1 ((uint8_t)0x00) +#define I2C_Register_CR2 ((uint8_t)0x04) +#define I2C_Register_OAR1 ((uint8_t)0x08) +#define I2C_Register_OAR2 ((uint8_t)0x0C) +#define I2C_Register_TIMINGR ((uint8_t)0x10) +#define I2C_Register_TIMEOUTR ((uint8_t)0x14) +#define I2C_Register_ISR ((uint8_t)0x18) +#define I2C_Register_ICR ((uint8_t)0x1C) +#define I2C_Register_PECR ((uint8_t)0x20) +#define I2C_Register_RXDR ((uint8_t)0x24) +#define I2C_Register_TXDR ((uint8_t)0x28) + +#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ + ((REGISTER) == I2C_Register_CR2) || \ + ((REGISTER) == I2C_Register_OAR1) || \ + ((REGISTER) == I2C_Register_OAR2) || \ + ((REGISTER) == I2C_Register_TIMINGR) || \ + ((REGISTER) == I2C_Register_TIMEOUTR) || \ + ((REGISTER) == I2C_Register_ISR) || \ + ((REGISTER) == I2C_Register_ICR) || \ + ((REGISTER) == I2C_Register_PECR) || \ + ((REGISTER) == I2C_Register_RXDR) || \ + ((REGISTER) == I2C_Register_TXDR)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE + +#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint32_t)0xFFFFFF01) == 0x00) && ((IT) != 0x00)) + +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @{ + */ + +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_NACKF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY + +#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFF4000) == 0x00) && ((FLAG) != 0x00)) + +#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_TXIS) || \ + ((FLAG) == I2C_FLAG_RXNE) || ((FLAG) == I2C_FLAG_ADDR) || \ + ((FLAG) == I2C_FLAG_NACKF) || ((FLAG) == I2C_FLAG_STOPF) || \ + ((FLAG) == I2C_FLAG_TC) || ((FLAG) == I2C_FLAG_TCR) || \ + ((FLAG) == I2C_FLAG_BERR) || ((FLAG) == I2C_FLAG_ARLO) || \ + ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_PECERR) || \ + ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_ALERT) || \ + ((FLAG) == I2C_FLAG_BUSY)) + +/** + * @} + */ + + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_TXIS I2C_ISR_TXIS +#define I2C_IT_RXNE I2C_ISR_RXNE +#define I2C_IT_ADDR I2C_ISR_ADDR +#define I2C_IT_NACKF I2C_ISR_NACKF +#define I2C_IT_STOPF I2C_ISR_STOPF +#define I2C_IT_TC I2C_ISR_TC +#define I2C_IT_TCR I2C_ISR_TCR +#define I2C_IT_BERR I2C_ISR_BERR +#define I2C_IT_ARLO I2C_ISR_ARLO +#define I2C_IT_OVR I2C_ISR_OVR +#define I2C_IT_PECERR I2C_ISR_PECERR +#define I2C_IT_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_IT_ALERT I2C_ISR_ALERT + +#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFFFFC001) == 0x00) && ((IT) != 0x00)) + +#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_TXIS) || ((IT) == I2C_IT_RXNE) || \ + ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_NACKF) || \ + ((IT) == I2C_IT_STOPF) || ((IT) == I2C_IT_TC) || \ + ((IT) == I2C_IT_TCR) || ((IT) == I2C_IT_BERR) || \ + ((IT) == I2C_IT_ARLO) || ((IT) == I2C_IT_OVR) || \ + ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_TIMEOUT) || \ + ((IT) == I2C_IT_ALERT)) + + +/** + * @} + */ + +/** @defgroup I2C_ReloadEndMode_definition + * @{ + */ + +#define I2C_Reload_Mode I2C_CR2_RELOAD +#define I2C_AutoEnd_Mode I2C_CR2_AUTOEND +#define I2C_SoftEnd_Mode ((uint32_t)0x00000000) + + +#define IS_RELOAD_END_MODE(MODE) (((MODE) == I2C_Reload_Mode) || \ + ((MODE) == I2C_AutoEnd_Mode) || \ + ((MODE) == I2C_SoftEnd_Mode)) + + +/** + * @} + */ + +/** @defgroup I2C_StartStopMode_definition + * @{ + */ + +#define I2C_No_StartStop ((uint32_t)0x00000000) +#define I2C_Generate_Stop I2C_CR2_STOP +#define I2C_Generate_Start_Read (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_Generate_Start_Write I2C_CR2_START + + +#define IS_START_STOP_MODE(MODE) (((MODE) == I2C_Generate_Stop) || \ + ((MODE) == I2C_Generate_Start_Read) || \ + ((MODE) == I2C_Generate_Start_Write) || \ + ((MODE) == I2C_No_StartStop)) + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + + +/* Initialization and Configuration functions *********************************/ +void I2C_DeInit(I2C_TypeDef* I2Cx); +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx); +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint32_t I2C_IT, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_StopModeCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); /*!< not applicable for STM32F030 devices */ +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint16_t Address, uint8_t Mask); +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_SlaveByteControlCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_SlaveAddressConfig(I2C_TypeDef* I2Cx, uint16_t Address); +void I2C_10BitAddressingModeCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); + +/* Communications handling functions ******************************************/ +void I2C_AutoEndCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_ReloadCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_NumberOfBytesConfig(I2C_TypeDef* I2Cx, uint8_t Number_Bytes); +void I2C_MasterRequestConfig(I2C_TypeDef* I2Cx, uint16_t I2C_Direction); +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_10BitAddressHeaderCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetAddressMatched(I2C_TypeDef* I2Cx); +uint16_t I2C_GetTransferDirection(I2C_TypeDef* I2Cx); +void I2C_TransferHandling(I2C_TypeDef* I2Cx, uint16_t Address, uint8_t Number_Bytes, uint32_t ReloadEndMode, uint32_t StartStopMode); + +/* SMBUS management functions ************************************************/ +void I2C_SMBusAlertCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_ClockTimeoutCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_ExtendedClockTimeoutCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_IdleClockTimeoutCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_TimeoutAConfig(I2C_TypeDef* I2Cx, uint16_t Timeout); +void I2C_TimeoutBConfig(I2C_TypeDef* I2Cx, uint16_t Timeout); +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_PECRequestCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); + +/* I2C registers management functions *****************************************/ +uint32_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); + +/* Data transfers management functions ****************************************/ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); + +/* DMA transfers management functions *****************************************/ +void I2C_DMACmd(I2C_TypeDef* I2Cx, uint32_t I2C_DMAReq, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_I2C_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_iwdg.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_iwdg.h new file mode 100644 index 0000000..91bc325 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_iwdg.h @@ -0,0 +1,132 @@ +/** + ****************************************************************************** + * @file stm32f0xx_iwdg.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the IWDG + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_IWDG_H +#define __STM32F0XX_IWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup IWDG_Exported_Constants + * @{ + */ + +/** @defgroup IWDG_WriteAccess + * @{ + */ + +#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) +#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) +#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ + ((ACCESS) == IWDG_WriteAccess_Disable)) +/** + * @} + */ + +/** @defgroup IWDG_prescaler + * @{ + */ + +#define IWDG_Prescaler_4 ((uint8_t)0x00) +#define IWDG_Prescaler_8 ((uint8_t)0x01) +#define IWDG_Prescaler_16 ((uint8_t)0x02) +#define IWDG_Prescaler_32 ((uint8_t)0x03) +#define IWDG_Prescaler_64 ((uint8_t)0x04) +#define IWDG_Prescaler_128 ((uint8_t)0x05) +#define IWDG_Prescaler_256 ((uint8_t)0x06) +#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ + ((PRESCALER) == IWDG_Prescaler_8) || \ + ((PRESCALER) == IWDG_Prescaler_16) || \ + ((PRESCALER) == IWDG_Prescaler_32) || \ + ((PRESCALER) == IWDG_Prescaler_64) || \ + ((PRESCALER) == IWDG_Prescaler_128)|| \ + ((PRESCALER) == IWDG_Prescaler_256)) +/** + * @} + */ + +/** @defgroup IWDG_Flag + * @{ + */ + +#define IWDG_FLAG_PVU IWDG_SR_PVU +#define IWDG_FLAG_RVU IWDG_SR_RVU +#define IWDG_FLAG_WVU IWDG_SR_WVU +#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU) || \ + ((FLAG) == IWDG_FLAG_WVU)) + +#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) + +#define IS_IWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0xFFF) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Prescaler and Counter configuration functions ******************************/ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); +void IWDG_SetReload(uint16_t Reload); +void IWDG_ReloadCounter(void); +void IWDG_SetWindowValue(uint16_t WindowValue); + +/* IWDG activation function ***************************************************/ +void IWDG_Enable(void); + +/* Flag management function ***************************************************/ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_IWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_misc.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_misc.h new file mode 100644 index 0000000..b652a28 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_misc.h @@ -0,0 +1,135 @@ +/** + ****************************************************************************** + * @file stm32f0xx_misc.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_MISC_H +#define __STM32F0XX_MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete STM32 Devices IRQ Channels list, + please refer to stm32f0xx.h file) */ + + uint8_t NVIC_IRQChannelPriority; /*!< Specifies the priority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 3. */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/** + * +@verbatim + +@endverbatim +*/ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup MISC_System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup MISC_Preemption_Priority_Group + * @{ + */ +#define IS_NVIC_PRIORITY(PRIORITY) ((PRIORITY) < 0x04) + +/** + * @} + */ + +/** @defgroup MISC_SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_pwr.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_pwr.h new file mode 100644 index 0000000..d73d774 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_pwr.h @@ -0,0 +1,189 @@ +/** + ****************************************************************************** + * @file stm32f0xx_pwr.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_PWR_H +#define __STM32F0XX_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level + * @brief This parameters are only applicable for STM32F051 and STM32F072 devices + * @{ + */ + +#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7 + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \ + ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \ + ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \ + ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7)) +/** + * @} + */ + +/** @defgroup PWR_WakeUp_Pins + * @{ + */ + +#define PWR_WakeUpPin_1 PWR_CSR_EWUP1 +#define PWR_WakeUpPin_2 PWR_CSR_EWUP2 +#define PWR_WakeUpPin_3 PWR_CSR_EWUP3 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_4 PWR_CSR_EWUP4 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_5 PWR_CSR_EWUP5 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_6 PWR_CSR_EWUP6 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_7 PWR_CSR_EWUP7 /*!< only applicable for STM32F072 devices */ +#define PWR_WakeUpPin_8 PWR_CSR_EWUP8 /*!< only applicable for STM32F072 devices */ +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || ((PIN) == PWR_WakeUpPin_2) || \ + ((PIN) == PWR_WakeUpPin_3) || ((PIN) == PWR_WakeUpPin_4) || \ + ((PIN) == PWR_WakeUpPin_5) || ((PIN) == PWR_WakeUpPin_6) || \ + ((PIN) == PWR_WakeUpPin_7) || ((PIN) == PWR_WakeUpPin_8)) +/** + * @} + */ + + +/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower PWR_CR_LPSDSR +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry + * @{ + */ + +#define PWR_SLEEPEntry_WFI ((uint8_t)0x01) +#define PWR_SLEEPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define PWR_STOPEntry_SLEEPONEXIT ((uint8_t)0x03) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE) ||\ + ((ENTRY) == PWR_STOPEntry_SLEEPONEXIT)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO /*!< Not applicable for STM32F030 devices */ +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF + +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the PWR configuration to the default reset state ******/ +void PWR_DeInit(void); + +/* Backup Domain Access function **********************************************/ +void PWR_BackupAccessCmd(FunctionalState NewState); + +/* PVD configuration functions ************************************************/ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); /*!< only applicable for STM32F051 and STM32F072 devices */ +void PWR_PVDCmd(FunctionalState NewState); /*!< only applicable for STM32F051 and STM32F072 devices */ + +/* WakeUp pins configuration functions ****************************************/ +void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState); + +/* Low Power modes configuration functions ************************************/ +void PWR_EnterSleepMode(uint8_t PWR_SLEEPEntry); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); + +/* Flags management functions *************************************************/ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_PWR_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_rcc.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_rcc.h new file mode 100644 index 0000000..abd62d3 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_rcc.h @@ -0,0 +1,616 @@ +/** + ****************************************************************************** + * @file stm32f0xx_rcc.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the RCC + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_RCC_H +#define __STM32F0XX_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +typedef struct +{ + uint32_t SYSCLK_Frequency; + uint32_t HCLK_Frequency; + uint32_t PCLK_Frequency; + uint32_t ADCCLK_Frequency; + uint32_t CECCLK_Frequency; + uint32_t I2C1CLK_Frequency; + uint32_t USART1CLK_Frequency; + uint32_t USART2CLK_Frequency; /*!< Only applicable for STM32F072 and STM32F091 devices */ + uint32_t USART3CLK_Frequency; /*!< Only applicable for STM32F091 devices */ + uint32_t USBCLK_Frequency; /*!< Only applicable for STM32F072 devices */ +}RCC_ClocksTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup RCC_HSE_configuration + * @{ + */ + +#define RCC_HSE_OFF ((uint8_t)0x00) +#define RCC_HSE_ON ((uint8_t)0x01) +#define RCC_HSE_Bypass ((uint8_t)0x05) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) + +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source + * @{ + */ + +#define RCC_PLLSource_HSI_Div2 RCC_CFGR_PLLSRC_HSI_Div2 +#define RCC_PLLSource_PREDIV1 RCC_CFGR_PLLSRC_HSE_PREDIV /* Old HSEPREDIV1 bit definition, maintained for legacy purpose */ +#define RCC_PLLSource_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< Only applicable for STM32F072 devices */ +#define RCC_PLLSource_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV /*!< Only applicable for STM32F072 devices */ +#define RCC_PLLSource_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< Only applicable for STM32F072 devices */ + +#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_HSI48) || \ + ((SOURCE) == RCC_PLLSource_HSI) || \ + ((SOURCE) == RCC_PLLSource_HSE) || \ + ((SOURCE) == RCC_PLLSource_PREDIV1)) +/** + * @} + */ + +/** @defgroup RCC_PLL_Multiplication_Factor + * @{ + */ + +#define RCC_PLLMul_2 RCC_CFGR_PLLMULL2 +#define RCC_PLLMul_3 RCC_CFGR_PLLMULL3 +#define RCC_PLLMul_4 RCC_CFGR_PLLMULL4 +#define RCC_PLLMul_5 RCC_CFGR_PLLMULL5 +#define RCC_PLLMul_6 RCC_CFGR_PLLMULL6 +#define RCC_PLLMul_7 RCC_CFGR_PLLMULL7 +#define RCC_PLLMul_8 RCC_CFGR_PLLMULL8 +#define RCC_PLLMul_9 RCC_CFGR_PLLMULL9 +#define RCC_PLLMul_10 RCC_CFGR_PLLMULL10 +#define RCC_PLLMul_11 RCC_CFGR_PLLMULL11 +#define RCC_PLLMul_12 RCC_CFGR_PLLMULL12 +#define RCC_PLLMul_13 RCC_CFGR_PLLMULL13 +#define RCC_PLLMul_14 RCC_CFGR_PLLMULL14 +#define RCC_PLLMul_15 RCC_CFGR_PLLMULL15 +#define RCC_PLLMul_16 RCC_CFGR_PLLMULL16 +#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ + ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ + ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ + ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ + ((MUL) == RCC_PLLMul_16)) +/** + * @} + */ + +/** @defgroup RCC_PREDIV1_division_factor + * @{ + */ +#define RCC_PREDIV1_Div1 RCC_CFGR2_PREDIV1_DIV1 +#define RCC_PREDIV1_Div2 RCC_CFGR2_PREDIV1_DIV2 +#define RCC_PREDIV1_Div3 RCC_CFGR2_PREDIV1_DIV3 +#define RCC_PREDIV1_Div4 RCC_CFGR2_PREDIV1_DIV4 +#define RCC_PREDIV1_Div5 RCC_CFGR2_PREDIV1_DIV5 +#define RCC_PREDIV1_Div6 RCC_CFGR2_PREDIV1_DIV6 +#define RCC_PREDIV1_Div7 RCC_CFGR2_PREDIV1_DIV7 +#define RCC_PREDIV1_Div8 RCC_CFGR2_PREDIV1_DIV8 +#define RCC_PREDIV1_Div9 RCC_CFGR2_PREDIV1_DIV9 +#define RCC_PREDIV1_Div10 RCC_CFGR2_PREDIV1_DIV10 +#define RCC_PREDIV1_Div11 RCC_CFGR2_PREDIV1_DIV11 +#define RCC_PREDIV1_Div12 RCC_CFGR2_PREDIV1_DIV12 +#define RCC_PREDIV1_Div13 RCC_CFGR2_PREDIV1_DIV13 +#define RCC_PREDIV1_Div14 RCC_CFGR2_PREDIV1_DIV14 +#define RCC_PREDIV1_Div15 RCC_CFGR2_PREDIV1_DIV15 +#define RCC_PREDIV1_Div16 RCC_CFGR2_PREDIV1_DIV16 + +#define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ + ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ + ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ + ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ + ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ + ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ + ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ + ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source + * @{ + */ + +#define RCC_SYSCLKSource_HSI RCC_CFGR_SW_HSI +#define RCC_SYSCLKSource_HSE RCC_CFGR_SW_HSE +#define RCC_SYSCLKSource_PLLCLK RCC_CFGR_SW_PLL +#define RCC_SYSCLKSource_HSI48 RCC_CFGR_SW_HSI48 /*!< Only applicable for STM32F072 devices */ + +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_HSI48) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source + * @{ + */ + +#define RCC_SYSCLK_Div1 RCC_CFGR_HPRE_DIV1 +#define RCC_SYSCLK_Div2 RCC_CFGR_HPRE_DIV2 +#define RCC_SYSCLK_Div4 RCC_CFGR_HPRE_DIV4 +#define RCC_SYSCLK_Div8 RCC_CFGR_HPRE_DIV8 +#define RCC_SYSCLK_Div16 RCC_CFGR_HPRE_DIV16 +#define RCC_SYSCLK_Div64 RCC_CFGR_HPRE_DIV64 +#define RCC_SYSCLK_Div128 RCC_CFGR_HPRE_DIV128 +#define RCC_SYSCLK_Div256 RCC_CFGR_HPRE_DIV256 +#define RCC_SYSCLK_Div512 RCC_CFGR_HPRE_DIV512 +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup RCC_APB_Clock_Source + * @{ + */ + +#define RCC_HCLK_Div1 RCC_CFGR_PPRE_DIV1 +#define RCC_HCLK_Div2 RCC_CFGR_PPRE_DIV2 +#define RCC_HCLK_Div4 RCC_CFGR_PPRE_DIV4 +#define RCC_HCLK_Div8 RCC_CFGR_PPRE_DIV8 +#define RCC_HCLK_Div16 RCC_CFGR_PPRE_DIV16 +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_ADC_clock_source + * @{ + */ +/* These defines are obsolete and kept for legacy purpose only. +Proper ADC clock selection is done within ADC driver by mean of the ADC_ClockModeConfig() function */ +#define RCC_ADCCLK_HSI14 ((uint32_t)0x00000000) +#define RCC_ADCCLK_PCLK_Div2 ((uint32_t)0x01000000) +#define RCC_ADCCLK_PCLK_Div4 ((uint32_t)0x01004000) + +#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_ADCCLK_HSI14) || ((ADCCLK) == RCC_ADCCLK_PCLK_Div2) || \ + ((ADCCLK) == RCC_ADCCLK_PCLK_Div4)) + +/** + * @} + */ + +/** @defgroup RCC_CEC_clock_source + * @{ + */ + +#define RCC_CECCLK_HSI_Div244 ((uint32_t)0x00000000) +#define RCC_CECCLK_LSE RCC_CFGR3_CECSW + +#define IS_RCC_CECCLK(CECCLK) (((CECCLK) == RCC_CECCLK_HSI_Div244) || ((CECCLK) == RCC_CECCLK_LSE)) + +/** + * @} + */ + +/** @defgroup RCC_I2C_clock_source + * @{ + */ + +#define RCC_I2C1CLK_HSI ((uint32_t)0x00000000) +#define RCC_I2C1CLK_SYSCLK RCC_CFGR3_I2C1SW + +#define IS_RCC_I2CCLK(I2CCLK) (((I2CCLK) == RCC_I2C1CLK_HSI) || ((I2CCLK) == RCC_I2C1CLK_SYSCLK)) + +/** + * @} + */ + +/** @defgroup RCC_USB_clock_source + * @brief Applicable only for STM32F072 devices + * @{ + */ + +#define RCC_USBCLK_HSI48 ((uint32_t)0x00000000) +#define RCC_USBCLK_PLLCLK RCC_CFGR3_USBSW + +#define IS_RCC_USBCLK(USBCLK) (((USBCLK) == RCC_USBCLK_HSI48) || ((USBCLK) == RCC_USBCLK_PLLCLK)) + +/** + * @} + */ + +/** @defgroup RCC_USART_clock_source + * @{ + */ + +#define RCC_USART1CLK_PCLK ((uint32_t)0x10000000) +#define RCC_USART1CLK_SYSCLK ((uint32_t)0x10000001) +#define RCC_USART1CLK_LSE ((uint32_t)0x10000002) +#define RCC_USART1CLK_HSI ((uint32_t)0x10000003) + +#define RCC_USART2CLK_PCLK ((uint32_t)0x20000000) /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define RCC_USART2CLK_SYSCLK ((uint32_t)0x20010000) /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define RCC_USART2CLK_LSE ((uint32_t)0x20020000) /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define RCC_USART2CLK_HSI ((uint32_t)0x20030000) /*!< Only applicable for STM32F072 and STM32F091 devices */ + +#define RCC_USART3CLK_PCLK ((uint32_t)0x30000000) /*!< Only applicable for STM32F091 devices */ +#define RCC_USART3CLK_SYSCLK ((uint32_t)0x30040000) /*!< Only applicable for STM32F091 devices */ +#define RCC_USART3CLK_LSE ((uint32_t)0x30080000) /*!< Only applicable for STM32F091 devices */ +#define RCC_USART3CLK_HSI ((uint32_t)0x300C0000) /*!< Only applicable for STM32F091 devices */ + + +#define IS_RCC_USARTCLK(USARTCLK) (((USARTCLK) == RCC_USART1CLK_PCLK) || \ + ((USARTCLK) == RCC_USART1CLK_SYSCLK) || \ + ((USARTCLK) == RCC_USART1CLK_LSE) || \ + ((USARTCLK) == RCC_USART1CLK_HSI) || \ + ((USARTCLK) == RCC_USART2CLK_PCLK) || \ + ((USARTCLK) == RCC_USART2CLK_SYSCLK) || \ + ((USARTCLK) == RCC_USART2CLK_LSE) || \ + ((USARTCLK) == RCC_USART2CLK_HSI)|| \ + ((USARTCLK) == RCC_USART3CLK_PCLK) || \ + ((USARTCLK) == RCC_USART3CLK_SYSCLK) || \ + ((USARTCLK) == RCC_USART3CLK_LSE) || \ + ((USARTCLK) == RCC_USART3CLK_HSI)) + +/** + * @} + */ + +/** @defgroup RCC_Interrupt_Source + * @{ + */ + +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_HSI14RDY ((uint8_t)0x20) +#define RCC_IT_HSI48RDY ((uint8_t)0x40) /*!< Only applicable for STM32F072 devices */ +#define RCC_IT_CSS ((uint8_t)0x80) + +#define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) + +#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_HSI14RDY) || \ + ((IT) == RCC_IT_CSS) || ((IT) == RCC_IT_HSI48RDY)) + +#define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) + +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration + * @{ + */ + +#define RCC_LSE_OFF ((uint32_t)0x00000000) +#define RCC_LSE_ON RCC_BDCR_LSEON +#define RCC_LSE_Bypass ((uint32_t)(RCC_BDCR_LSEON | RCC_BDCR_LSEBYP)) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source + * @{ + */ + +#define RCC_RTCCLKSource_LSE RCC_BDCR_RTCSEL_LSE +#define RCC_RTCCLKSource_LSI RCC_BDCR_RTCSEL_LSI +#define RCC_RTCCLKSource_HSE_Div32 RCC_BDCR_RTCSEL_HSE + +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div32)) +/** + * @} + */ + +/** @defgroup RCC_LSE_Drive_Configuration + * @{ + */ + +#define RCC_LSEDrive_Low ((uint32_t)0x00000000) +#define RCC_LSEDrive_MediumLow RCC_BDCR_LSEDRV_0 +#define RCC_LSEDrive_MediumHigh RCC_BDCR_LSEDRV_1 +#define RCC_LSEDrive_High RCC_BDCR_LSEDRV +#define IS_RCC_LSE_DRIVE(DRIVE) (((DRIVE) == RCC_LSEDrive_Low) || ((DRIVE) == RCC_LSEDrive_MediumLow) || \ + ((DRIVE) == RCC_LSEDrive_MediumHigh) || ((DRIVE) == RCC_LSEDrive_High)) +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripherals + * @{ + */ + +#define RCC_AHBPeriph_GPIOA RCC_AHBENR_GPIOAEN +#define RCC_AHBPeriph_GPIOB RCC_AHBENR_GPIOBEN +#define RCC_AHBPeriph_GPIOC RCC_AHBENR_GPIOCEN +#define RCC_AHBPeriph_GPIOD RCC_AHBENR_GPIODEN +#define RCC_AHBPeriph_GPIOE RCC_AHBENR_GPIOEEN /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define RCC_AHBPeriph_GPIOF RCC_AHBENR_GPIOFEN +#define RCC_AHBPeriph_TS RCC_AHBENR_TSEN +#define RCC_AHBPeriph_CRC RCC_AHBENR_CRCEN +#define RCC_AHBPeriph_FLITF RCC_AHBENR_FLITFEN +#define RCC_AHBPeriph_SRAM RCC_AHBENR_SRAMEN +#define RCC_AHBPeriph_DMA1 RCC_AHBENR_DMA1EN +#define RCC_AHBPeriph_DMA2 RCC_AHBENR_DMA2EN + +#define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFE81FFA8) == 0x00) && ((PERIPH) != 0x00)) +#define IS_RCC_AHB_RST_PERIPH(PERIPH) ((((PERIPH) & 0xFE81FFA8) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripherals + * @{ + */ + +#define RCC_APB2Periph_SYSCFG RCC_APB2ENR_SYSCFGEN +#define RCC_APB2Periph_USART6 RCC_APB2ENR_USART6EN +#define RCC_APB2Periph_USART7 RCC_APB2ENR_USART7EN +#define RCC_APB2Periph_USART8 RCC_APB2ENR_USART8EN +#define RCC_APB2Periph_ADC1 RCC_APB2ENR_ADC1EN +#define RCC_APB2Periph_TIM1 RCC_APB2ENR_TIM1EN +#define RCC_APB2Periph_SPI1 RCC_APB2ENR_SPI1EN +#define RCC_APB2Periph_USART1 RCC_APB2ENR_USART1EN +#define RCC_APB2Periph_TIM15 RCC_APB2ENR_TIM15EN +#define RCC_APB2Periph_TIM16 RCC_APB2ENR_TIM16EN +#define RCC_APB2Periph_TIM17 RCC_APB2ENR_TIM17EN +#define RCC_APB2Periph_DBGMCU RCC_APB2ENR_DBGMCUEN + +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFB8A51E) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripherals + * @{ + */ + +#define RCC_APB1Periph_TIM2 RCC_APB1ENR_TIM2EN /*!< Only applicable for STM32F051, STM32F072 and STM32F091 devices */ +#define RCC_APB1Periph_TIM3 RCC_APB1ENR_TIM3EN +#define RCC_APB1Periph_TIM6 RCC_APB1ENR_TIM6EN +#define RCC_APB1Periph_TIM7 RCC_APB1ENR_TIM7EN /*!< Only applicable for STM32F072 devices */ +#define RCC_APB1Periph_TIM14 RCC_APB1ENR_TIM14EN +#define RCC_APB1Periph_WWDG RCC_APB1ENR_WWDGEN +#define RCC_APB1Periph_SPI2 RCC_APB1ENR_SPI2EN +#define RCC_APB1Periph_USART2 RCC_APB1ENR_USART2EN +#define RCC_APB1Periph_USART3 RCC_APB1ENR_USART3EN /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define RCC_APB1Periph_USART4 RCC_APB1ENR_USART4EN /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define RCC_APB1Periph_USART5 RCC_APB1ENR_USART5EN /*!< Only applicable for STM32F091 devices */ +#define RCC_APB1Periph_I2C1 RCC_APB1ENR_I2C1EN +#define RCC_APB1Periph_I2C2 RCC_APB1ENR_I2C2EN +#define RCC_APB1Periph_USB RCC_APB1ENR_USBEN /*!< Only applicable for STM32F072 and STM32F042 devices */ +#define RCC_APB1Periph_CAN RCC_APB1ENR_CANEN /*!< Only applicable for STM32F072, STM32F042 and STM32F091 devices */ +#define RCC_APB1Periph_CRS RCC_APB1ENR_CRSEN /*!< Only applicable for STM32F072, STM32F042 and STM32F091 devices */ +#define RCC_APB1Periph_PWR RCC_APB1ENR_PWREN +#define RCC_APB1Periph_DAC RCC_APB1ENR_DACEN /*!< Only applicable for STM32F051, STM32F072 and STM32F091 devices */ +#define RCC_APB1Periph_CEC RCC_APB1ENR_CECEN /*!< Only applicable for STM32F051, STM32F042, STM32F072 and STM32F091 devices */ + +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x8581B6CC) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_MCO_Clock_Source + * @{ + */ + +#define RCC_MCOSource_NoClock ((uint8_t)0x00) +#define RCC_MCOSource_HSI14 ((uint8_t)0x01) +#define RCC_MCOSource_LSI ((uint8_t)0x02) +#define RCC_MCOSource_LSE ((uint8_t)0x03) +#define RCC_MCOSource_SYSCLK ((uint8_t)0x04) +#define RCC_MCOSource_HSI ((uint8_t)0x05) +#define RCC_MCOSource_HSE ((uint8_t)0x06) +#define RCC_MCOSource_PLLCLK_Div2 ((uint8_t)0x07) +#define RCC_MCOSource_HSI48 ((uint8_t)0x08) /*!< Only applicable for STM32F072 devices */ +#define RCC_MCOSource_PLLCLK ((uint8_t)0x87) + +#define IS_RCC_MCO_SOURCE(SOURCE) (((SOURCE) == RCC_MCOSource_NoClock) || ((SOURCE) == RCC_MCOSource_HSI14) || \ + ((SOURCE) == RCC_MCOSource_SYSCLK) || ((SOURCE) == RCC_MCOSource_HSI) || \ + ((SOURCE) == RCC_MCOSource_HSE) || ((SOURCE) == RCC_MCOSource_PLLCLK_Div2)|| \ + ((SOURCE) == RCC_MCOSource_LSI) || ((SOURCE) == RCC_MCOSource_HSI48) || \ + ((SOURCE) == RCC_MCOSource_PLLCLK) || ((SOURCE) == RCC_MCOSource_LSE)) +/** + * @} + */ + +/** @defgroup RCC_MCOPrescaler + * @{ + */ +#if !defined (STM32F051) +#define RCC_MCOPrescaler_1 RCC_CFGR_MCO_PRE_1 +#define RCC_MCOPrescaler_2 RCC_CFGR_MCO_PRE_2 +#define RCC_MCOPrescaler_4 RCC_CFGR_MCO_PRE_4 +#define RCC_MCOPrescaler_8 RCC_CFGR_MCO_PRE_8 +#define RCC_MCOPrescaler_16 RCC_CFGR_MCO_PRE_16 +#define RCC_MCOPrescaler_32 RCC_CFGR_MCO_PRE_32 +#define RCC_MCOPrescaler_64 RCC_CFGR_MCO_PRE_64 +#define RCC_MCOPrescaler_128 RCC_CFGR_MCO_PRE_128 + +#define IS_RCC_MCO_PRESCALER(PRESCALER) (((PRESCALER) == RCC_MCOPrescaler_1) || \ + ((PRESCALER) == RCC_MCOPrescaler_2) || \ + ((PRESCALER) == RCC_MCOPrescaler_4) || \ + ((PRESCALER) == RCC_MCOPrescaler_8) || \ + ((PRESCALER) == RCC_MCOPrescaler_16) || \ + ((PRESCALER) == RCC_MCOPrescaler_32) || \ + ((PRESCALER) == RCC_MCOPrescaler_64) || \ + ((PRESCALER) == RCC_MCOPrescaler_128)) +#endif /* STM32F051 */ +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ +#define RCC_FLAG_HSIRDY ((uint8_t)0x01) +#define RCC_FLAG_HSERDY ((uint8_t)0x11) +#define RCC_FLAG_PLLRDY ((uint8_t)0x19) +#define RCC_FLAG_LSERDY ((uint8_t)0x21) +#define RCC_FLAG_LSIRDY ((uint8_t)0x41) +#define RCC_FLAG_V18PWRRSTF ((uint8_t)0x57) +#define RCC_FLAG_OBLRST ((uint8_t)0x59) +#define RCC_FLAG_PINRST ((uint8_t)0x5A) +#define RCC_FLAG_PORRST ((uint8_t)0x5B) +#define RCC_FLAG_SFTRST ((uint8_t)0x5C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x5D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x5E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x5F) +#define RCC_FLAG_HSI14RDY ((uint8_t)0x61) +#define RCC_FLAG_HSI48RDY ((uint8_t)0x71) /*!< Only applicable for STM32F072 devices */ + +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_OBLRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDGRST) || \ + ((FLAG) == RCC_FLAG_WWDGRST) || ((FLAG) == RCC_FLAG_LPWRRST) || \ + ((FLAG) == RCC_FLAG_HSI14RDY)|| ((FLAG) == RCC_FLAG_HSI48RDY)|| \ + ((FLAG) == RCC_FLAG_V18PWRRSTF)) + +#define IS_RCC_HSI_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +#define IS_RCC_HSI14_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the RCC clock configuration to the default reset state */ +void RCC_DeInit(void); + +/* Internal/external clocks, PLL, CSS and MCO configuration functions *********/ +void RCC_HSEConfig(uint8_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_AdjustHSI14CalibrationValue(uint8_t HSI14CalibrationValue); +void RCC_HSI14Cmd(FunctionalState NewState); +void RCC_HSI14ADCRequestCmd(FunctionalState NewState); +void RCC_LSEConfig(uint32_t RCC_LSE); +void RCC_LSEDriveConfig(uint32_t RCC_LSEDrive); +void RCC_LSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); +void RCC_HSI48Cmd(FunctionalState NewState); /*!< Only applicable for STM32F072 devices */ +uint32_t RCC_GetHSI48CalibrationValue(void); /*!< Only applicable for STM32F072 devices */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Div); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +#ifdef STM32F051 +void RCC_MCOConfig(uint8_t RCC_MCOSource); +#else +void RCC_MCOConfig(uint8_t RCC_MCOSource,uint32_t RCC_MCOPrescaler); +#endif /* STM32F051 */ + +/* System, AHB and APB busses clocks configuration functions ******************/ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLKConfig(uint32_t RCC_HCLK); +void RCC_ADCCLKConfig(uint32_t RCC_ADCCLK); /* This function is obsolete. + For proper ADC clock selection, refer to + ADC_ClockModeConfig() in the ADC driver */ +void RCC_CECCLKConfig(uint32_t RCC_CECCLK); +void RCC_I2CCLKConfig(uint32_t RCC_I2CCLK); +void RCC_USARTCLKConfig(uint32_t RCC_USARTCLK); +void RCC_USBCLKConfig(uint32_t RCC_USBCLK); /*!< Only applicable for STM32F042 and STM32F072 devices */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); + +/* Peripheral clocks configuration functions **********************************/ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); + +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_RCC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_rtc.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_rtc.h new file mode 100644 index 0000000..8e24096 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_rtc.h @@ -0,0 +1,799 @@ +/** + ****************************************************************************** + * @file stm32f0xx_rtc.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the RTC firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_RTC_H +#define __STM32F0XX_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t RTC_HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t RTC_AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be set to a value lower than 0x7F */ + + uint32_t RTC_SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be set to a value lower than 0x1FFF */ +}RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t RTC_Hours; /*!< Specifies the RTC Time Hour. + This parameter must be set to a value in the 0-12 range + if the RTC_HourFormat_12 is selected or 0-23 range if + the RTC_HourFormat_24 is selected. */ + + uint8_t RTC_Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be set to a value in the 0-59 range. */ + + uint8_t RTC_Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be set to a value in the 0-59 range. */ + + uint8_t RTC_H12; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ +}RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t RTC_WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t RTC_Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t RTC_Date; /*!< Specifies the RTC Date. + This parameter must be set to a value in the 1-31 range. */ + + uint8_t RTC_Year; /*!< Specifies the RTC Date Year. + This parameter must be set to a value in the 0-99 range. */ +}RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef RTC_AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t RTC_AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t RTC_AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t RTC_AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + This parameter must be set to a value in the 1-31 range + if the Alarm Date is selected. + This parameter can be a value of @ref RTC_WeekDay_Definitions + if the Alarm WeekDay is selected. */ +}RTC_AlarmTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Constants + * @{ + */ + + +/** @defgroup RTC_Hour_Formats + * @{ + */ +#define RTC_HourFormat_24 ((uint32_t)0x00000000) +#define RTC_HourFormat_12 ((uint32_t)0x00000040) +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HourFormat_12) || \ + ((FORMAT) == RTC_HourFormat_24)) +/** + * @} + */ + +/** @defgroup RTC_Asynchronous_Predivider + * @{ + */ +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7F) + +/** + * @} + */ + + +/** @defgroup RTC_Synchronous_Predivider + * @{ + */ +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFF) + +/** + * @} + */ + +/** @defgroup RTC_Time_Definitions + * @{ + */ +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0) && ((HOUR) <= 12)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59) + +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions + * @{ + */ +#define RTC_H12_AM ((uint8_t)0x00) +#define RTC_H12_PM ((uint8_t)0x40) +#define IS_RTC_H12(PM) (((PM) == RTC_H12_AM) || ((PM) == RTC_H12_PM)) + +/** + * @} + */ + +/** @defgroup RTC_Year_Date_Definitions + * @{ + */ +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99) + +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions + * @{ + */ +#define RTC_Month_January ((uint8_t)0x01) +#define RTC_Month_February ((uint8_t)0x02) +#define RTC_Month_March ((uint8_t)0x03) +#define RTC_Month_April ((uint8_t)0x04) +#define RTC_Month_May ((uint8_t)0x05) +#define RTC_Month_June ((uint8_t)0x06) +#define RTC_Month_July ((uint8_t)0x07) +#define RTC_Month_August ((uint8_t)0x08) +#define RTC_Month_September ((uint8_t)0x09) +#define RTC_Month_October ((uint8_t)0x10) +#define RTC_Month_November ((uint8_t)0x11) +#define RTC_Month_December ((uint8_t)0x12) +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1) && ((MONTH) <= 12)) +#define IS_RTC_DATE(DATE) (((DATE) >= 1) && ((DATE) <= 31)) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions + * @{ + */ + +#define RTC_Weekday_Monday ((uint8_t)0x01) +#define RTC_Weekday_Tuesday ((uint8_t)0x02) +#define RTC_Weekday_Wednesday ((uint8_t)0x03) +#define RTC_Weekday_Thursday ((uint8_t)0x04) +#define RTC_Weekday_Friday ((uint8_t)0x05) +#define RTC_Weekday_Saturday ((uint8_t)0x6) +#define RTC_Weekday_Sunday ((uint8_t)0x07) +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ + ((WEEKDAY) == RTC_Weekday_Tuesday) || \ + ((WEEKDAY) == RTC_Weekday_Wednesday) || \ + ((WEEKDAY) == RTC_Weekday_Thursday) || \ + ((WEEKDAY) == RTC_Weekday_Friday) || \ + ((WEEKDAY) == RTC_Weekday_Saturday) || \ + ((WEEKDAY) == RTC_Weekday_Sunday)) +/** + * @} + */ + + +/** @defgroup RTC_Alarm_Definitions + * @{ + */ +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0) && ((DATE) <= 31)) +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ + ((WEEKDAY) == RTC_Weekday_Tuesday) || \ + ((WEEKDAY) == RTC_Weekday_Wednesday) || \ + ((WEEKDAY) == RTC_Weekday_Thursday) || \ + ((WEEKDAY) == RTC_Weekday_Friday) || \ + ((WEEKDAY) == RTC_Weekday_Saturday) || \ + ((WEEKDAY) == RTC_Weekday_Sunday)) + +/** + * @} + */ + + +/** @defgroup RTC_AlarmDateWeekDay_Definitions + * @{ + */ +#define RTC_AlarmDateWeekDaySel_Date ((uint32_t)0x00000000) +#define RTC_AlarmDateWeekDaySel_WeekDay ((uint32_t)0x40000000) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_AlarmDateWeekDaySel_Date) || \ + ((SEL) == RTC_AlarmDateWeekDaySel_WeekDay)) + +/** + * @} + */ + + +/** @defgroup RTC_AlarmMask_Definitions + * @{ + */ +#define RTC_AlarmMask_None ((uint32_t)0x00000000) +#define RTC_AlarmMask_DateWeekDay ((uint32_t)0x80000000) +#define RTC_AlarmMask_Hours ((uint32_t)0x00800000) +#define RTC_AlarmMask_Minutes ((uint32_t)0x00008000) +#define RTC_AlarmMask_Seconds ((uint32_t)0x00000080) +#define RTC_AlarmMask_All ((uint32_t)0x80808080) +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions + * @{ + */ +#define RTC_Alarm_A ((uint32_t)0x00000100) +#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_Alarm_A) +#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & (RTC_Alarm_A)) != (uint32_t)RESET) + +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Masks Definitions. + * @{ + */ +#define RTC_AlarmSubSecondMask_All ((uint8_t)0x00) /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_AlarmSubSecondMask_SS14_1 ((uint8_t)0x01) /*!< SS[14:1] are don't care in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_AlarmSubSecondMask_SS14_2 ((uint8_t)0x02) /*!< SS[14:2] are don't care in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_3 ((uint8_t)0x03) /*!< SS[14:3] are don't care in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_4 ((uint8_t)0x04) /*!< SS[14:4] are don't care in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_5 ((uint8_t)0x05) /*!< SS[14:5] are don't care in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_6 ((uint8_t)0x06) /*!< SS[14:6] are don't care in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_7 ((uint8_t)0x07) /*!< SS[14:7] are don't care in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_8 ((uint8_t)0x08) /*!< SS[14:8] are don't care in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_9 ((uint8_t)0x09) /*!< SS[14:9] are don't care in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_10 ((uint8_t)0x0A) /*!< SS[14:10] are don't care in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_11 ((uint8_t)0x0B) /*!< SS[14:11] are don't care in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_12 ((uint8_t)0x0C) /*!< SS[14:12] are don't care in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_13 ((uint8_t)0x0D) /*!< SS[14:13] are don't care in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14 ((uint8_t)0x0E) /*!< SS[14] is don't care in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_AlarmSubSecondMask_None ((uint8_t)0x0F) /*!< SS[14:0] are compared and must match + to activate alarm. */ +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_AlarmSubSecondMask_All) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_1) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_2) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_3) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_4) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_5) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_6) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_7) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_8) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_9) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_10) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_11) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_12) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_13) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14) || \ + ((MASK) == RTC_AlarmSubSecondMask_None)) +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Value + * @{ + */ + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFF) + +/** + * @} + */ + +/** @defgroup RTC_Wakeup_Timer_Definitions + * @brief These parameters are only available for STM32F072 devices + * @{ + */ +#define RTC_WakeUpClock_RTCCLK_Div16 ((uint32_t)0x00000000) +#define RTC_WakeUpClock_RTCCLK_Div8 ((uint32_t)0x00000001) +#define RTC_WakeUpClock_RTCCLK_Div4 ((uint32_t)0x00000002) +#define RTC_WakeUpClock_RTCCLK_Div2 ((uint32_t)0x00000003) +#define RTC_WakeUpClock_CK_SPRE_16bits ((uint32_t)0x00000004) +#define RTC_WakeUpClock_CK_SPRE_17bits ((uint32_t)0x00000006) +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WakeUpClock_RTCCLK_Div16) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div8) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div4) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div2) || \ + ((CLOCK) == RTC_WakeUpClock_CK_SPRE_16bits) || \ + ((CLOCK) == RTC_WakeUpClock_CK_SPRE_17bits)) +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF) +/** + * @} + */ + +/** @defgroup RTC_Time_Stamp_Edges_definitions + * @{ + */ +#define RTC_TimeStampEdge_Rising ((uint32_t)0x00000000) +#define RTC_TimeStampEdge_Falling ((uint32_t)0x00000008) +#define IS_RTC_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TimeStampEdge_Rising) || \ + ((EDGE) == RTC_TimeStampEdge_Falling)) +/** + * @} + */ + +/** @defgroup RTC_Output_selection_Definitions + * @{ + */ +#define RTC_Output_Disable ((uint32_t)0x00000000) +#define RTC_Output_AlarmA ((uint32_t)0x00200000) +#define RTC_Output_WakeUp ((uint32_t)0x00600000) /*!< available only for STM32F072 devices */ + +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \ + ((OUTPUT) == RTC_Output_AlarmA) || \ + ((OUTPUT) == RTC_Output_WakeUp)) + +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions + * @{ + */ +#define RTC_OutputPolarity_High ((uint32_t)0x00000000) +#define RTC_OutputPolarity_Low ((uint32_t)0x00100000) +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OutputPolarity_High) || \ + ((POL) == RTC_OutputPolarity_Low)) +/** + * @} + */ + + +/** @defgroup RTC_Calib_Output_selection_Definitions + * @{ + */ +#define RTC_CalibOutput_512Hz ((uint32_t)0x00000000) +#define RTC_CalibOutput_1Hz ((uint32_t)0x00080000) +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CalibOutput_512Hz) || \ + ((OUTPUT) == RTC_CalibOutput_1Hz)) +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_period_Definitions + * @{ + */ +#define RTC_SmoothCalibPeriod_32sec ((uint32_t)0x00000000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK seconds */ +#define RTC_SmoothCalibPeriod_16sec ((uint32_t)0x00002000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK seconds */ +#define RTC_SmoothCalibPeriod_8sec ((uint32_t)0x00004000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK seconds */ +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SmoothCalibPeriod_32sec) || \ + ((PERIOD) == RTC_SmoothCalibPeriod_16sec) || \ + ((PERIOD) == RTC_SmoothCalibPeriod_8sec)) + +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_Plus_pulses_Definitions + * @{ + */ +#define RTC_SmoothCalibPlusPulses_Set ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0]. + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SmoothCalibPlusPulses_Reset ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0]. */ +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SmoothCalibPlusPulses_Set) || \ + ((PLUS) == RTC_SmoothCalibPlusPulses_Reset)) + +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_Minus_pulses_Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF) + +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions + * @{ + */ +#define RTC_DayLightSaving_SUB1H ((uint32_t)0x00020000) +#define RTC_DayLightSaving_ADD1H ((uint32_t)0x00010000) +#define IS_RTC_DAYLIGHT_SAVING(SAVING) (((SAVING) == RTC_DayLightSaving_SUB1H) || \ + ((SAVING) == RTC_DayLightSaving_ADD1H)) + +#define RTC_StoreOperation_Reset ((uint32_t)0x00000000) +#define RTC_StoreOperation_Set ((uint32_t)0x00040000) +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \ + ((OPERATION) == RTC_StoreOperation_Set)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Trigger_Definitions + * @{ + */ +#define RTC_TamperTrigger_RisingEdge ((uint32_t)0x00000000) +#define RTC_TamperTrigger_FallingEdge ((uint32_t)0x00000001) +#define RTC_TamperTrigger_LowLevel ((uint32_t)0x00000000) +#define RTC_TamperTrigger_HighLevel ((uint32_t)0x00000001) +#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TamperTrigger_RisingEdge) || \ + ((TRIGGER) == RTC_TamperTrigger_FallingEdge) || \ + ((TRIGGER) == RTC_TamperTrigger_LowLevel) || \ + ((TRIGGER) == RTC_TamperTrigger_HighLevel)) + +/** + * @} + */ + +/** @defgroup RTC_Tamper_Filter_Definitions + * @{ + */ +#define RTC_TamperFilter_Disable ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ + +#define RTC_TamperFilter_2Sample ((uint32_t)0x00000800) /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TamperFilter_4Sample ((uint32_t)0x00001000) /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TamperFilter_8Sample ((uint32_t)0x00001800) /*!< Tamper is activated after 8 + consecutive samples at the active leve. */ +#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TamperFilter_Disable) || \ + ((FILTER) == RTC_TamperFilter_2Sample) || \ + ((FILTER) == RTC_TamperFilter_4Sample) || \ + ((FILTER) == RTC_TamperFilter_8Sample)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Sampling_Frequencies_Definitions + * @{ + */ +#define RTC_TamperSamplingFreq_RTCCLK_Div32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ +#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div32768) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div16384) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div8192) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div4096) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div2048) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div1024) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div512) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div256)) + +/** + * @} + */ + + /** @defgroup RTC_Tamper_Pin_Precharge_Duration_Definitions + * @{ + */ +#define RTC_TamperPrechargeDuration_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TamperPrechargeDuration_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TamperPrechargeDuration_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TamperPrechargeDuration_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TamperPrechargeDuration_1RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_2RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_4RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_8RTCCLK)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Pins_Definitions + * @{ + */ +#define RTC_Tamper_1 RTC_TAFCR_TAMP1E /*!< Tamper detection enable for + input tamper 1 */ +#define RTC_Tamper_2 RTC_TAFCR_TAMP2E /*!< Tamper detection enable for + input tamper 2 */ +#define RTC_Tamper_3 RTC_TAFCR_TAMP3E /*!< Tamper detection enable for + input tamper 3, available only + for STM32F072 devices */ +#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT + * @{ + */ +#define RTC_OutputType_OpenDrain ((uint32_t)0x00000000) +#define RTC_OutputType_PushPull ((uint32_t)0x00040000) +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OutputType_OpenDrain) || \ + ((TYPE) == RTC_OutputType_PushPull)) + +/** + * @} + */ + +/** @defgroup RTC_Add_1_Second_Parameter_Definitions + * @{ + */ +#define RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000) +#define RTC_ShiftAdd1S_Set ((uint32_t)0x80000000) +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_ShiftAdd1S_Reset) || \ + ((SEL) == RTC_ShiftAdd1S_Set)) +/** + * @} + */ + +/** @defgroup RTC_Substract_Fraction_Of_Second_Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF) + +/** + * @} + */ + +/** @defgroup RTC_Backup_Registers_Definitions + * @{ + */ + +#define RTC_BKP_DR0 ((uint32_t)0x00000000) +#define RTC_BKP_DR1 ((uint32_t)0x00000001) +#define RTC_BKP_DR2 ((uint32_t)0x00000002) +#define RTC_BKP_DR3 ((uint32_t)0x00000003) +#define RTC_BKP_DR4 ((uint32_t)0x00000004) +#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \ + ((BKP) == RTC_BKP_DR1) || \ + ((BKP) == RTC_BKP_DR2) || \ + ((BKP) == RTC_BKP_DR3) || \ + ((BKP) == RTC_BKP_DR4)) +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions + * @{ + */ +#define RTC_Format_BIN ((uint32_t)0x000000000) +#define RTC_Format_BCD ((uint32_t)0x000000001) +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD)) + +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions + * @{ + */ +#define RTC_FLAG_RECALPF RTC_ISR_RECALPF +#define RTC_FLAG_TAMP3F RTC_ISR_TAMP3F /*!< Only available for STM32F072 devices */ +#define RTC_FLAG_TAMP2F RTC_ISR_TAMP2F +#define RTC_FLAG_TAMP1F RTC_ISR_TAMP1F +#define RTC_FLAG_TSOVF RTC_ISR_TSOVF +#define RTC_FLAG_TSF RTC_ISR_TSF +#define RTC_FLAG_WUTF RTC_ISR_WUTF /*!< Only available for STM32F072 devices */ +#define RTC_FLAG_ALRAF RTC_ISR_ALRAF +#define RTC_FLAG_INITF RTC_ISR_INITF +#define RTC_FLAG_RSF RTC_ISR_RSF +#define RTC_FLAG_INITS RTC_ISR_INITS +#define RTC_FLAG_SHPF RTC_ISR_SHPF +#define RTC_FLAG_WUTWF RTC_ISR_WUTWF /*!< Only available for STM32F072 devices */ +#define RTC_FLAG_ALRAWF RTC_ISR_ALRAWF + +#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_TSOVF) || ((FLAG) == RTC_FLAG_TSF) || \ + ((FLAG) == RTC_FLAG_WUTF) || ((FLAG) == RTC_FLAG_ALRAWF) || \ + ((FLAG) == RTC_FLAG_ALRAF) || ((FLAG) == RTC_FLAG_INITF) || \ + ((FLAG) == RTC_FLAG_RSF) || ((FLAG) == RTC_FLAG_WUTWF) || \ + ((FLAG) == RTC_FLAG_TAMP1F) || ((FLAG) == RTC_FLAG_TAMP2F) || \ + ((FLAG) == RTC_FLAG_TAMP3F) || ((FLAG) == RTC_FLAG_RECALPF) || \ + ((FLAG) == RTC_FLAG_SHPF)) +#define IS_RTC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFF02DF) == (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions + * @{ + */ +#define RTC_IT_TS ((uint32_t)0x00008000) +#define RTC_IT_WUT ((uint32_t)0x00004000) /* Available only for STM32F072 devices */ +#define RTC_IT_ALRA ((uint32_t)0x00001000) +#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */ +#define RTC_IT_TAMP1 ((uint32_t)0x00020000) +#define RTC_IT_TAMP2 ((uint32_t)0x00040000) +#define RTC_IT_TAMP3 ((uint32_t)0x00080000) /* Available only for STM32F072 devices */ + +#define IS_RTC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFF2FFB) == (uint32_t)RESET)) +#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_TS) || ((IT) == RTC_IT_ALRA) || \ + ((IT) == RTC_IT_TAMP1) || ((IT) == RTC_IT_WUT) || \ + ((IT) == RTC_IT_TAMP2) || ((IT) == RTC_IT_TAMP3)) + +#define IS_RTC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFF12FFF) == (uint32_t)RESET)) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Function used to set the RTC configuration to the default reset state *****/ +ErrorStatus RTC_DeInit(void); + + +/* Initialization and Configuration functions *********************************/ +ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct); +void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct); +void RTC_WriteProtectionCmd(FunctionalState NewState); +ErrorStatus RTC_EnterInitMode(void); +void RTC_ExitInitMode(void); +ErrorStatus RTC_WaitForSynchro(void); +ErrorStatus RTC_RefClockCmd(FunctionalState NewState); +void RTC_BypassShadowCmd(FunctionalState NewState); + +/* Time and Date configuration functions **************************************/ +ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); +void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct); +void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); +uint32_t RTC_GetSubSecond(void); +ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); +void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct); +void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); + +/* Alarms (Alarm A) configuration functions **********************************/ +void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); +void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct); +void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); +ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState); +void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint8_t RTC_AlarmSubSecondMask); +uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm); + +/* WakeUp Timer configuration functions ***************************************/ +void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock); /*!< available only for STM32F072 devices */ +void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter); /*!< available only for STM32F072 devices */ +uint32_t RTC_GetWakeUpCounter(void); /*!< available only for STM32F072 devices */ +ErrorStatus RTC_WakeUpCmd(FunctionalState NewState); /*!< available only for STM32F072 devices */ + +/* Daylight Saving configuration functions ************************************/ +void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation); +uint32_t RTC_GetStoreOperation(void); + +/* Output pin Configuration function ******************************************/ +void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity); + +/* Digital Calibration configuration functions ********************************/ +void RTC_CalibOutputCmd(FunctionalState NewState); +void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput); +ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, + uint32_t RTC_SmoothCalibPlusPulses, + uint32_t RTC_SmouthCalibMinusPulsesValue); + +/* TimeStamp configuration functions ******************************************/ +void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState); +void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, RTC_DateTypeDef* RTC_StampDateStruct); +uint32_t RTC_GetTimeStampSubSecond(void); + +/* Tampers configuration functions ********************************************/ +void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger); +void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState); +void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter); +void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq); +void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration); +void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState); +void RTC_TamperPullUpCmd(FunctionalState NewState); + +/* Backup Data Registers configuration functions ******************************/ +void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data); +uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR); + +/* Output Type Config configuration functions *********************************/ +void RTC_OutputTypeConfig(uint32_t RTC_OutputType); + +/* RTC_Shift_control_synchonisation_functions *********************************/ +ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS); + +/* Interrupts and flags management functions **********************************/ +void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState); +FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG); +void RTC_ClearFlag(uint32_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint32_t RTC_IT); +void RTC_ClearITPendingBit(uint32_t RTC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_RTC_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_spi.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_spi.h new file mode 100644 index 0000000..9051590 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_spi.h @@ -0,0 +1,580 @@ +/** + ****************************************************************************** + * @file stm32f0xx_spi.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the SPI + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_SPI_H +#define __STM32F0XX_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + + +/** + * @brief I2S Init structure definition + * @note These parameters are not available for STM32F030 devices. + */ + +typedef struct +{ + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref SPI_I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref SPI_I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref SPI_I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref SPI_I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref SPI_I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref SPI_I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2)) + +#define IS_SPI_1_PERIPH(PERIPH) (((PERIPH) == SPI1)) + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_4b ((uint16_t)0x0300) +#define SPI_DataSize_5b ((uint16_t)0x0400) +#define SPI_DataSize_6b ((uint16_t)0x0500) +#define SPI_DataSize_7b ((uint16_t)0x0600) +#define SPI_DataSize_8b ((uint16_t)0x0700) +#define SPI_DataSize_9b ((uint16_t)0x0800) +#define SPI_DataSize_10b ((uint16_t)0x0900) +#define SPI_DataSize_11b ((uint16_t)0x0A00) +#define SPI_DataSize_12b ((uint16_t)0x0B00) +#define SPI_DataSize_13b ((uint16_t)0x0C00) +#define SPI_DataSize_14b ((uint16_t)0x0D00) +#define SPI_DataSize_15b ((uint16_t)0x0E00) +#define SPI_DataSize_16b ((uint16_t)0x0F00) +#define IS_SPI_DATA_SIZE(SIZE) (((SIZE) == SPI_DataSize_4b) || \ + ((SIZE) == SPI_DataSize_5b) || \ + ((SIZE) == SPI_DataSize_6b) || \ + ((SIZE) == SPI_DataSize_7b) || \ + ((SIZE) == SPI_DataSize_8b) || \ + ((SIZE) == SPI_DataSize_9b) || \ + ((SIZE) == SPI_DataSize_10b) || \ + ((SIZE) == SPI_DataSize_11b) || \ + ((SIZE) == SPI_DataSize_12b) || \ + ((SIZE) == SPI_DataSize_13b) || \ + ((SIZE) == SPI_DataSize_14b) || \ + ((SIZE) == SPI_DataSize_15b) || \ + ((SIZE) == SPI_DataSize_16b)) +/** + * @} + */ + +/** @defgroup SPI_CRC_length + * @{ + */ + +#define SPI_CRCLength_8b ((uint16_t)0x0000) +#define SPI_CRCLength_16b SPI_CR1_CRCL +#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRCLength_8b) || \ + ((LENGTH) == SPI_CRCLength_16b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High SPI_CR1_CPOL +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge SPI_CR1_CPHA +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft SPI_CR1_SSM +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB SPI_CR1_LSBFIRST +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx)|| \ + ((MODE) == I2S_Mode_MasterRx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup SPI_I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable SPI_I2SPR_MCKOE +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High SPI_I2SCFGR_CKPOL +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold + * @{ + */ + +#define SPI_RxFIFOThreshold_HF ((uint16_t)0x0000) +#define SPI_RxFIFOThreshold_QF SPI_CR2_FRXTH +#define IS_SPI_RX_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SPI_RxFIFOThreshold_HF) || \ + ((THRESHOLD) == SPI_RxFIFOThreshold_QF)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx SPI_CR2_TXDMAEN +#define SPI_I2S_DMAReq_Rx SPI_CR2_RXDMAEN +#define IS_SPI_I2S_DMA_REQ(REQ) ((((REQ) & (uint16_t)0xFFFC) == 0x00) && ((REQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_last_DMA_transfers + * @{ + */ + +#define SPI_LastDMATransfer_TxEvenRxEven ((uint16_t)0x0000) +#define SPI_LastDMATransfer_TxOddRxEven ((uint16_t)0x4000) +#define SPI_LastDMATransfer_TxEvenRxOdd ((uint16_t)0x2000) +#define SPI_LastDMATransfer_TxOddRxOdd ((uint16_t)0x6000) +#define IS_SPI_LAST_DMA_TRANSFER(TRANSFER) (((TRANSFER) == SPI_LastDMATransfer_TxEvenRxEven) || \ + ((TRANSFER) == SPI_LastDMATransfer_TxOddRxEven) || \ + ((TRANSFER) == SPI_LastDMATransfer_TxEvenRxOdd) || \ + ((TRANSFER) == SPI_LastDMATransfer_TxOddRxOdd)) +/** + * @} + */ +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set SPI_CR1_SSI +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) + +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) + +#define I2S_IT_UDR ((uint8_t)0x53) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_I2S_IT_FRE ((uint8_t)0x58) + +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_OVR) || ((IT) == SPI_IT_MODF) || \ + ((IT) == SPI_I2S_IT_FRE)|| ((IT) == I2S_IT_UDR)) +/** + * @} + */ + + +/** @defgroup SPI_transmission_fifo_status_level + * @{ + */ + +#define SPI_TransmissionFIFOStatus_Empty ((uint16_t)0x0000) +#define SPI_TransmissionFIFOStatus_1QuarterFull ((uint16_t)0x0800) +#define SPI_TransmissionFIFOStatus_HalfFull ((uint16_t)0x1000) +#define SPI_TransmissionFIFOStatus_Full ((uint16_t)0x1800) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level + * @{ + */ +#define SPI_ReceptionFIFOStatus_Empty ((uint16_t)0x0000) +#define SPI_ReceptionFIFOStatus_1QuarterFull ((uint16_t)0x0200) +#define SPI_ReceptionFIFOStatus_HalfFull ((uint16_t)0x0400) +#define SPI_ReceptionFIFOStatus_Full ((uint16_t)0x0600) + +/** + * @} + */ + + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE SPI_SR_RXNE +#define SPI_I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_UDR SPI_SR_UDR +#define SPI_FLAG_CRCERR SPI_SR_CRCERR +#define SPI_FLAG_MODF SPI_SR_MODF +#define SPI_I2S_FLAG_OVR SPI_SR_OVR +#define SPI_I2S_FLAG_BSY SPI_SR_BSY +#define SPI_I2S_FLAG_FRE SPI_SR_FRE + + + +#define IS_SPI_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \ + ((FLAG) == SPI_I2S_FLAG_FRE)|| ((FLAG) == I2S_FLAG_CHSIDE)|| \ + ((FLAG) == I2S_FLAG_UDR)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Initialization and Configuration functions *********************************/ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); /*!< Not applicable for STM32F030 devices */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); /*!< Not applicable for STM32F030 devices */ +void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_NSSPulseModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); /*!< Not applicable for STM32F030 devices */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_RxFIFOThresholdConfig(SPI_TypeDef* SPIx, uint16_t SPI_RxFIFOThreshold); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); + +/* Data transfers functions ***************************************************/ +void SPI_SendData8(SPI_TypeDef* SPIx, uint8_t Data); +void SPI_I2S_SendData16(SPI_TypeDef* SPIx, uint16_t Data); +uint8_t SPI_ReceiveData8(SPI_TypeDef* SPIx); +uint16_t SPI_I2S_ReceiveData16(SPI_TypeDef* SPIx); + +/* Hardware CRC Calculation functions *****************************************/ +void SPI_CRCLengthConfig(SPI_TypeDef* SPIx, uint16_t SPI_CRCLength); +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); + +/* DMA transfers management functions *****************************************/ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); +void SPI_LastDMATransferCmd(SPI_TypeDef* SPIx, uint16_t SPI_LastDMATransfer); + +/* Interrupts and flags management functions **********************************/ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +uint16_t SPI_GetTransmissionFIFOStatus(SPI_TypeDef* SPIx); +uint16_t SPI_GetReceptionFIFOStatus(SPI_TypeDef* SPIx); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_SPI_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_syscfg.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_syscfg.h new file mode 100644 index 0000000..e3fd006 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_syscfg.h @@ -0,0 +1,451 @@ +/** + ****************************************************************************** + * @file stm32f0xx_syscfg.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the SYSCFG firmware + * library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/*!< Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_SYSCFG_H +#define __STM32F0XX_SYSCFG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/*!< Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SYSCFG + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SYSCFG_Exported_Constants + * @{ + */ + +/** @defgroup SYSCFG_EXTI_Port_Sources + * @{ + */ +#define EXTI_PortSourceGPIOA ((uint8_t)0x00) +#define EXTI_PortSourceGPIOB ((uint8_t)0x01) +#define EXTI_PortSourceGPIOC ((uint8_t)0x02) +#define EXTI_PortSourceGPIOD ((uint8_t)0x03) /*!< not available for STM32F031 devices */ +#define EXTI_PortSourceGPIOE ((uint8_t)0x04) /*!< only available for STM32F072 devices */ +#define EXTI_PortSourceGPIOF ((uint8_t)0x05) + +#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOB) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOC) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOD) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOE) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOF)) +/** + * @} + */ + +/** @defgroup SYSCFG_EXTI_Pin_sources + * @{ + */ +#define EXTI_PinSource0 ((uint8_t)0x00) +#define EXTI_PinSource1 ((uint8_t)0x01) +#define EXTI_PinSource2 ((uint8_t)0x02) +#define EXTI_PinSource3 ((uint8_t)0x03) +#define EXTI_PinSource4 ((uint8_t)0x04) +#define EXTI_PinSource5 ((uint8_t)0x05) +#define EXTI_PinSource6 ((uint8_t)0x06) +#define EXTI_PinSource7 ((uint8_t)0x07) +#define EXTI_PinSource8 ((uint8_t)0x08) +#define EXTI_PinSource9 ((uint8_t)0x09) +#define EXTI_PinSource10 ((uint8_t)0x0A) +#define EXTI_PinSource11 ((uint8_t)0x0B) +#define EXTI_PinSource12 ((uint8_t)0x0C) +#define EXTI_PinSource13 ((uint8_t)0x0D) +#define EXTI_PinSource14 ((uint8_t)0x0E) +#define EXTI_PinSource15 ((uint8_t)0x0F) + +#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0) || \ + ((PINSOURCE) == EXTI_PinSource1) || \ + ((PINSOURCE) == EXTI_PinSource2) || \ + ((PINSOURCE) == EXTI_PinSource3) || \ + ((PINSOURCE) == EXTI_PinSource4) || \ + ((PINSOURCE) == EXTI_PinSource5) || \ + ((PINSOURCE) == EXTI_PinSource6) || \ + ((PINSOURCE) == EXTI_PinSource7) || \ + ((PINSOURCE) == EXTI_PinSource8) || \ + ((PINSOURCE) == EXTI_PinSource9) || \ + ((PINSOURCE) == EXTI_PinSource10) || \ + ((PINSOURCE) == EXTI_PinSource11) || \ + ((PINSOURCE) == EXTI_PinSource12) || \ + ((PINSOURCE) == EXTI_PinSource13) || \ + ((PINSOURCE) == EXTI_PinSource14) || \ + ((PINSOURCE) == EXTI_PinSource15)) +/** + * @} + */ + +/** @defgroup SYSCFG_Memory_Remap_Config + * @{ + */ +#define SYSCFG_MemoryRemap_Flash ((uint8_t)0x00) +#define SYSCFG_MemoryRemap_SystemMemory ((uint8_t)0x01) +#define SYSCFG_MemoryRemap_SRAM ((uint8_t)0x03) + + +#define IS_SYSCFG_MEMORY_REMAP(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \ + ((REMAP) == SYSCFG_MemoryRemap_SystemMemory) || \ + ((REMAP) == SYSCFG_MemoryRemap_SRAM)) + +/** + * @} + */ + +/** @defgroup SYSCFG_DMA_Remap_Config + * @{ + */ +#define SYSCFG_DMARemap_TIM3 SYSCFG_CFGR1_TIM3_DMA_RMP /* Remap TIM3 DMA requests from channel4 to channel6, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_TIM2 SYSCFG_CFGR1_TIM2_DMA_RMP /* Remap TIM2 DMA requests from channel3/4 to channel7, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_TIM1 SYSCFG_CFGR1_TIM1_DMA_RMP /* Remap TIM1 DMA requests from channel2/3/4 to channel6, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_I2C1 SYSCFG_CFGR1_I2C1_DMA_RMP /* Remap I2C1 DMA requests from channel3/2 to channel7/6, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_USART3 SYSCFG_CFGR1_USART3_DMA_RMP /* Remap USART3 DMA requests from channel6/7 to channel3/2, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_USART2 SYSCFG_CFGR1_USART2_DMA_RMP /* Remap USART2 DMA requests from channel4/5 to channel6/7, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_SPI2 SYSCFG_CFGR1_SPI2_DMA_RMP /* Remap SPI2 DMA requests from channel4/5 to channel6/7, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_TIM17_2 SYSCFG_CFGR1_TIM17_DMA_RMP2 /* Remap TIM17 DMA requests from channel1/2 to channel7, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_TIM16_2 SYSCFG_CFGR1_TIM16_DMA_RMP2 /* Remap TIM16 DMA requests from channel3/4 to channel6, + available only for STM32F072 devices */ +#define SYSCFG_DMARemap_TIM17 SYSCFG_CFGR1_TIM17_DMA_RMP /* Remap TIM17 DMA requests from channel1 to channel2 */ +#define SYSCFG_DMARemap_TIM16 SYSCFG_CFGR1_TIM16_DMA_RMP /* Remap TIM16 DMA requests from channel3 to channel4 */ +#define SYSCFG_DMARemap_USART1Rx SYSCFG_CFGR1_USART1RX_DMA_RMP /* Remap USART1 Rx DMA requests from channel3 to channel5 */ +#define SYSCFG_DMARemap_USART1Tx SYSCFG_CFGR1_USART1TX_DMA_RMP /* Remap USART1 Tx DMA requests from channel2 to channel4 */ +#define SYSCFG_DMARemap_ADC1 SYSCFG_CFGR1_ADC_DMA_RMP /* Remap ADC1 DMA requests from channel1 to channel2 */ + +#define IS_SYSCFG_DMA_REMAP(REMAP) (((REMAP) == SYSCFG_DMARemap_TIM17) || \ + ((REMAP) == SYSCFG_DMARemap_TIM16) || \ + ((REMAP) == SYSCFG_DMARemap_USART1Rx) || \ + ((REMAP) == SYSCFG_DMARemap_USART1Tx) || \ + ((REMAP) == SYSCFG_CFGR1_TIM3_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_TIM2_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_TIM1_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_I2C1_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_USART3_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_USART2_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_SPI2_DMA_RMP) || \ + ((REMAP) == SYSCFG_CFGR1_TIM17_DMA_RMP2) || \ + ((REMAP) == SYSCFG_CFGR1_TIM16_DMA_RMP2) || \ + ((REMAP) == SYSCFG_DMARemap_ADC1)) + +/** + * @} + */ + +/** @defgroup SYSCFG_I2C_FastModePlus_Config + * @{ + */ +#define SYSCFG_I2CFastModePlus_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /* Enable Fast Mode Plus on PB6 */ +#define SYSCFG_I2CFastModePlus_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /* Enable Fast Mode Plus on PB7 */ +#define SYSCFG_I2CFastModePlus_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /* Enable Fast Mode Plus on PB8 */ +#define SYSCFG_I2CFastModePlus_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /* Enable Fast Mode Plus on PB9 */ +#define SYSCFG_I2CFastModePlus_I2C1 SYSCFG_CFGR1_I2C_FMP_I2C1 /* Enable Fast Mode Plus on PB10, PB11, PF6 and PF7(only for STM32F0031 and STM32F030 devices) */ +#define SYSCFG_I2CFastModePlus_I2C2 SYSCFG_CFGR1_I2C_FMP_I2C2 /* Enable Fast Mode Plus on I2C2 pins, available only for STM32F072 devices */ +#define SYSCFG_I2CFastModePlus_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /* Enable Fast Mode Plus on PA9 (only for STM32F031 and STM32F030 devices) */ +#define SYSCFG_I2CFastModePlus_PA10 SYSCFG_CFGR1_I2C_FMP_PA10/* Enable Fast Mode Plus on PA10(only for STM32F031 and STM32F030 devices) */ + +#define IS_SYSCFG_I2C_FMP(PIN) (((PIN) == SYSCFG_I2CFastModePlus_PB6) || \ + ((PIN) == SYSCFG_I2CFastModePlus_PB7) || \ + ((PIN) == SYSCFG_I2CFastModePlus_PB8) || \ + ((PIN) == SYSCFG_I2CFastModePlus_PB9) || \ + ((PIN) == SYSCFG_I2CFastModePlus_I2C1) || \ + ((PIN) == SYSCFG_I2CFastModePlus_I2C2) || \ + ((PIN) == SYSCFG_I2CFastModePlus_PA9) || \ + ((PIN) == SYSCFG_I2CFastModePlus_PA10)) + + +/** + * @} + */ + +/** @defgroup SYSCFG_Lock_Config + * @{ + */ +#define SYSCFG_Break_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Connects the PVD event to the Break Input of TIM1, not available for STM32F030 devices */ +#define SYSCFG_Break_SRAMParity SYSCFG_CFGR2_SRAM_PARITY_LOCK /*!< Connects the SRAM_PARITY error signal to the Break Input of TIM1 */ +#define SYSCFG_Break_Lockup SYSCFG_CFGR2_LOCKUP_LOCK /*!< Connects Lockup output of CortexM0 to the break input of TIM1 */ + +#define IS_SYSCFG_LOCK_CONFIG(CONFIG) (((CONFIG) == SYSCFG_Break_PVD) || \ + ((CONFIG) == SYSCFG_Break_SRAMParity) || \ + ((CONFIG) == SYSCFG_Break_Lockup)) + +/** + * @} + */ + +/** @defgroup SYSCFG_flags_definition + * @{ + */ + +#define SYSCFG_FLAG_PE SYSCFG_CFGR2_SRAM_PE + +#define IS_SYSCFG_FLAG(FLAG) (((FLAG) == SYSCFG_FLAG_PE)) + +/** + * @} + */ + +/** @defgroup SYSCFG_ISR_WRAPPER + * @{ + */ +#define SYSCFG_ITLINE0 ((uint32_t) 0x00000000) +#define SYSCFG_ITLINE1 ((uint32_t) 0x00000001) +#define SYSCFG_ITLINE2 ((uint32_t) 0x00000002) +#define SYSCFG_ITLINE3 ((uint32_t) 0x00000003) +#define SYSCFG_ITLINE4 ((uint32_t) 0x00000004) +#define SYSCFG_ITLINE5 ((uint32_t) 0x00000005) +#define SYSCFG_ITLINE6 ((uint32_t) 0x00000006) +#define SYSCFG_ITLINE7 ((uint32_t) 0x00000007) +#define SYSCFG_ITLINE8 ((uint32_t) 0x00000008) +#define SYSCFG_ITLINE9 ((uint32_t) 0x00000009) +#define SYSCFG_ITLINE10 ((uint32_t) 0x0000000A) +#define SYSCFG_ITLINE11 ((uint32_t) 0x0000000B) +#define SYSCFG_ITLINE12 ((uint32_t) 0x0000000C) +#define SYSCFG_ITLINE13 ((uint32_t) 0x0000000D) +#define SYSCFG_ITLINE14 ((uint32_t) 0x0000000E) +#define SYSCFG_ITLINE15 ((uint32_t) 0x0000000F) +#define SYSCFG_ITLINE16 ((uint32_t) 0x00000010) +#define SYSCFG_ITLINE17 ((uint32_t) 0x00000011) +#define SYSCFG_ITLINE18 ((uint32_t) 0x00000012) +#define SYSCFG_ITLINE19 ((uint32_t) 0x00000013) +#define SYSCFG_ITLINE20 ((uint32_t) 0x00000014) +#define SYSCFG_ITLINE21 ((uint32_t) 0x00000015) +#define SYSCFG_ITLINE22 ((uint32_t) 0x00000016) +#define SYSCFG_ITLINE23 ((uint32_t) 0x00000017) +#define SYSCFG_ITLINE24 ((uint32_t) 0x00000018) +#define SYSCFG_ITLINE25 ((uint32_t) 0x00000019) +#define SYSCFG_ITLINE26 ((uint32_t) 0x0000001A) +#define SYSCFG_ITLINE27 ((uint32_t) 0x0000001B) +#define SYSCFG_ITLINE28 ((uint32_t) 0x0000001C) +#define SYSCFG_ITLINE29 ((uint32_t) 0x0000001D) +#define SYSCFG_ITLINE30 ((uint32_t) 0x0000001E) +#define SYSCFG_ITLINE31 ((uint32_t) 0x0000001F) + +#define ITLINE_EWDG ((uint32_t) ((SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /* EWDG Interrupt */ +#define ITLINE_PVDOUT ((uint32_t) ((SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /* Power voltage detection Interrupt */ +#define ITLINE_VDDIO2 ((uint32_t) ((SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /* VDDIO2 Interrupt */ +#define ITLINE_RTC_WAKEUP ((uint32_t) ((SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /* RTC WAKEUP -> exti[20] Interrupt */ +#define ITLINE_RTC_TSTAMP ((uint32_t) ((SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /* RTC Time Stamp -> exti[19] interrupt */ +#define ITLINE_RTC_ALRA ((uint32_t) ((SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /* RTC Alarm -> exti[17] interrupt */ +#define ITLINE_FLASH_ITF ((uint32_t) ((SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /* Flash ITF Interrupt */ +#define ITLINE_CRS ((uint32_t) ((SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /* CRS Interrupt */ +#define ITLINE_CLK_CTRL ((uint32_t) ((SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /* CLK Control Interrupt */ +#define ITLINE_EXTI0 ((uint32_t) ((SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /* External Interrupt 0 */ +#define ITLINE_EXTI1 ((uint32_t) ((SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /* External Interrupt 1 */ +#define ITLINE_EXTI2 ((uint32_t) ((SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /* External Interrupt 2 */ +#define ITLINE_EXTI3 ((uint32_t) ((SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /* External Interrupt 3 */ +#define ITLINE_EXTI4 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /* EXTI4 Interrupt */ +#define ITLINE_EXTI5 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /* EXTI5 Interrupt */ +#define ITLINE_EXTI6 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /* EXTI6 Interrupt */ +#define ITLINE_EXTI7 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /* EXTI7 Interrupt */ +#define ITLINE_EXTI8 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /* EXTI8 Interrupt */ +#define ITLINE_EXTI9 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /* EXTI9 Interrupt */ +#define ITLINE_EXTI10 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /* EXTI10 Interrupt */ +#define ITLINE_EXTI11 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /* EXTI11 Interrupt */ +#define ITLINE_EXTI12 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /* EXTI12 Interrupt */ +#define ITLINE_EXTI13 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /* EXTI13 Interrupt */ +#define ITLINE_EXTI14 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /* EXTI14 Interrupt */ +#define ITLINE_EXTI15 ((uint32_t) ((SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /* EXTI15 Interrupt */ +#define ITLINE_TSC_EOA ((uint32_t) ((SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /* Touch control EOA Interrupt */ +#define ITLINE_TSC_MCE ((uint32_t) ((SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /* Touch control MCE Interrupt */ +#define ITLINE_DMA1_CH1 ((uint32_t) ((SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /* DMA1 Channel 1 Interrupt */ +#define ITLINE_DMA1_CH2 ((uint32_t) ((SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /* DMA1 Channel 2 Interrupt */ +#define ITLINE_DMA1_CH3 ((uint32_t) ((SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /* DMA1 Channel 3 Interrupt */ +#define ITLINE_DMA2_CH1 ((uint32_t) ((SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /* DMA2 Channel 1 Interrupt */ +#define ITLINE_DMA2_CH2 ((uint32_t) ((SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /* DMA2 Channel 2 Interrupt */ +#define ITLINE_DMA1_CH4 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /* DMA1 Channel 4 Interrupt */ +#define ITLINE_DMA1_CH5 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /* DMA1 Channel 5 Interrupt */ +#define ITLINE_DMA1_CH6 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /* DMA1 Channel 6 Interrupt */ +#define ITLINE_DMA1_CH7 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /* DMA1 Channel 7 Interrupt */ +#define ITLINE_DMA2_CH3 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /* DMA2 Channel 3 Interrupt */ +#define ITLINE_DMA2_CH4 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /* DMA2 Channel 4 Interrupt */ +#define ITLINE_DMA2_CH5 ((uint32_t) ((SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /* DMA2 Channel 5 Interrupt */ +#define ITLINE_ADC ((uint32_t) ((SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /* ADC Interrupt */ +#define ITLINE_COMP1 ((uint32_t) ((SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /* COMP1 Interrupt -> exti[21] */ +#define ITLINE_COMP2 ((uint32_t) ((SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /* COMP2 Interrupt -> exti[21] */ +#define ITLINE_TIM1_BRK ((uint32_t) ((SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /* TIM1 BRK Interrupt */ +#define ITLINE_TIM1_UPD ((uint32_t) ((SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /* TIM1 UPD Interrupt */ +#define ITLINE_TIM1_TRG ((uint32_t) ((SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /* TIM1 TRG Interrupt */ +#define ITLINE_TIM1_CCU ((uint32_t) ((SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /* TIM1 CCU Interrupt */ +#define ITLINE_TIM1_CC ((uint32_t) ((SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /* TIM1 CC Interrupt */ +#define ITLINE_TIM2 ((uint32_t) ((SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /* TIM2 Interrupt */ +#define ITLINE_TIM3 ((uint32_t) ((SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /* TIM3 Interrupt */ +#define ITLINE_DAC ((uint32_t) ((SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /* DAC Interrupt */ +#define ITLINE_TIM6 ((uint32_t) ((SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /* TIM6 Interrupt */ +#define ITLINE_TIM7 ((uint32_t) ((SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /* TIM7 Interrupt */ +#define ITLINE_TIM14 ((uint32_t) ((SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /* TIM14 Interrupt */ +#define ITLINE_TIM15 ((uint32_t) ((SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /* TIM15 Interrupt */ +#define ITLINE_TIM16 ((uint32_t) ((SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /* TIM16 Interrupt */ +#define ITLINE_TIM17 ((uint32_t) ((SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /* TIM17 Interrupt */ +#define ITLINE_I2C1 ((uint32_t) ((SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /* I2C1 Interrupt -> exti[23] */ +#define ITLINE_I2C2 ((uint32_t) ((SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /* I2C2 Interrupt */ +#define ITLINE_SPI1 ((uint32_t) ((SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /* I2C1 Interrupt -> exti[23] */ +#define ITLINE_SPI2 ((uint32_t) ((SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /* SPI1 Interrupt */ +#define ITLINE_USART1 ((uint32_t) ((SYSCFG_ITLINE27 << 0x18) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */ +#define ITLINE_USART2 ((uint32_t) ((SYSCFG_ITLINE28 << 0x18) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */ +#define ITLINE_USART3 ((uint32_t) ((SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /* USART3 Interrupt */ +#define ITLINE_USART4 ((uint32_t) ((SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /* USART4 Interrupt */ +#define ITLINE_USART5 ((uint32_t) ((SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /* USART5 Interrupt */ +#define ITLINE_USART6 ((uint32_t) ((SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /* USART6 Interrupt */ +#define ITLINE_USART7 ((uint32_t) ((SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /* USART7 Interrupt */ +#define ITLINE_USART8 ((uint32_t) ((SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /* USART8 Interrupt */ +#define ITLINE_CAN ((uint32_t) ((SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /* CAN Interrupt */ +#define ITLINE_CEC ((uint32_t) ((SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /* CEC Interrupt -> exti[27] */ + +#define IS_SYSCFG_ITLINE(LINE) (((LINE) == ITLINE_EWDG) || \ + ((LINE) == ITLINE_PVDOUT) || \ + ((LINE) == ITLINE_VDDIO2) || \ + ((LINE) == ITLINE_RTC_WAKEUP) || \ + ((LINE) == ITLINE_RTC_TSTAMP) || \ + ((LINE) == ITLINE_RTC_ALRA) || \ + ((LINE) == ITLINE_FLASH_ITF) || \ + ((LINE) == ITLINE_CRS) || \ + ((LINE) == ITLINE_CLK_CTRL) || \ + ((LINE) == ITLINE_EXTI0) || \ + ((LINE) == ITLINE_EXTI1) || \ + ((LINE) == ITLINE_EXTI2) || \ + ((LINE) == ITLINE_EXTI3) || \ + ((LINE) == ITLINE_EXTI4) || \ + ((LINE) == ITLINE_EXTI5) || \ + ((LINE) == ITLINE_EXTI6) || \ + ((LINE) == ITLINE_EXTI7) || \ + ((LINE) == ITLINE_EXTI8) || \ + ((LINE) == ITLINE_EXTI9) || \ + ((LINE) == ITLINE_EXTI10) || \ + ((LINE) == ITLINE_EXTI11) || \ + ((LINE) == ITLINE_EXTI12) || \ + ((LINE) == ITLINE_EXTI13) || \ + ((LINE) == ITLINE_EXTI14) || \ + ((LINE) == ITLINE_EXTI15) || \ + ((LINE) == ITLINE_TSC_EOA) || \ + ((LINE) == ITLINE_TSC_MCE) || \ + ((LINE) == ITLINE_DMA1_CH1) || \ + ((LINE) == ITLINE_DMA1_CH2) || \ + ((LINE) == ITLINE_DMA1_CH3) || \ + ((LINE) == ITLINE_DMA1_CH4) || \ + ((LINE) == ITLINE_DMA1_CH5) || \ + ((LINE) == ITLINE_DMA1_CH6) || \ + ((LINE) == ITLINE_DMA1_CH7) || \ + ((LINE) == ITLINE_DMA2_CH1) || \ + ((LINE) == ITLINE_DMA2_CH2) || \ + ((LINE) == ITLINE_DMA2_CH3) || \ + ((LINE) == ITLINE_DMA2_CH4) || \ + ((LINE) == ITLINE_DMA2_CH5) || \ + ((LINE) == ITLINE_ADC) || \ + ((LINE) == ITLINE_COMP1) || \ + ((LINE) == ITLINE_COMP2) || \ + ((LINE) == ITLINE_TIM1_BRK) || \ + ((LINE) == ITLINE_TIM1_UPD) || \ + ((LINE) == ITLINE_TIM1_TRG) || \ + ((LINE) == ITLINE_TIM1_CCU) || \ + ((LINE) == ITLINE_TIM1_CC) || \ + ((LINE) == ITLINE_TIM2) || \ + ((LINE) == ITLINE_TIM3) || \ + ((LINE) == ITLINE_DAC) || \ + ((LINE) == ITLINE_TIM6) || \ + ((LINE) == ITLINE_TIM7) || \ + ((LINE) == ITLINE_TIM14) || \ + ((LINE) == ITLINE_TIM15) || \ + ((LINE) == ITLINE_TIM16) || \ + ((LINE) == ITLINE_TIM17) || \ + ((LINE) == ITLINE_I2C1) || \ + ((LINE) == ITLINE_I2C2) || \ + ((LINE) == ITLINE_SPI1) || \ + ((LINE) == ITLINE_SPI2) || \ + ((LINE) == ITLINE_USART1) || \ + ((LINE) == ITLINE_USART2) || \ + ((LINE) == ITLINE_USART3) || \ + ((LINE) == ITLINE_USART4) || \ + ((LINE) == ITLINE_USART5) || \ + ((LINE) == ITLINE_USART6) || \ + ((LINE) == ITLINE_USART7) || \ + ((LINE) == ITLINE_USART8) || \ + ((LINE) == ITLINE_CAN) || \ + ((LINE) == ITLINE_CEC)) + +/** + * @} + */ +/** @defgroup IRDA_ENV_SEL + * @{ + */ +#define SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0&SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* Timer16 is selected as IRDA Modulation envelope source */ +#define SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* USART1 is selected as IRDA Modulation envelope source.*/ +#define SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* USART4 is selected as IRDA Modulation envelope source.*/ + +#define IS_SYSCFG_IRDA_ENV(ENV) (((ENV) == SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((ENV) == SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((ENV) == SYSCFG_IRDA_ENV_SEL_USART4)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the SYSCFG configuration to the default reset state **/ +void SYSCFG_DeInit(void); + +/* SYSCFG configuration functions *********************************************/ +void SYSCFG_MemoryRemapConfig(uint32_t SYSCFG_MemoryRemap); +void SYSCFG_DMAChannelRemapConfig(uint32_t SYSCFG_DMARemap, FunctionalState NewState); +void SYSCFG_I2CFastModePlusConfig(uint32_t SYSCFG_I2CFastModePlus, FunctionalState NewState); +void SYSCFG_IRDAEnvSelection(uint32_t SYSCFG_IRDAEnv); +void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex); +uint32_t SYSCFG_GetPendingIT(uint32_t ITSourceLine); +void SYSCFG_BreakConfig(uint32_t SYSCFG_Break); +FlagStatus SYSCFG_GetFlagStatus(uint32_t SYSCFG_Flag); +void SYSCFG_ClearFlag(uint32_t SYSCFG_Flag); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_SYSCFG_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_tim.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_tim.h new file mode 100644 index 0000000..ec62176 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_tim.h @@ -0,0 +1,1178 @@ +/** + ****************************************************************************** + * @file stm32f0xx_tim.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the TIM + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_TIM_H +#define __STM32F0XX_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief TIM Time Base Init structure definition + * @note This sturcture is used with all TIMx. + */ + +typedef struct +{ + uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t TIM_Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between 0x0000 and 0xFFFF. */ + + uint16_t TIM_ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_Clock_Division_CKD */ + + uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between 0x00 and 0xFF. + @note This parameter is valid only for TIM1. */ +} TIM_TimeBaseInitTypeDef; + +/** + * @brief TIM Output Compare Init structure definition + */ + +typedef struct +{ + uint16_t TIM_OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_state */ + + uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_N_state + @note This parameter is valid only for TIM1. */ + + uint32_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between 0x0000 and 0xFFFF ( or 0xFFFFFFFF + for TIM2) */ + + uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1. */ + + uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1. */ + + uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1. */ +} TIM_OCInitTypeDef; + +/** + * @brief TIM Input Capture Init structure definition + */ + +typedef struct +{ + + uint16_t TIM_Channel; /*!< Specifies the TIM channel. + This parameter can be a value of @ref TIM_Channel */ + + uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint16_t TIM_ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between 0x0 and 0xF */ +} TIM_ICInitTypeDef; + +/** + * @brief TIM_BDTR structure definition + * @note This sturcture is used only with TIM1. + */ + +typedef struct +{ + + uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_Lock_level */ + + uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between 0x00 and 0xFF */ + + uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_Break_Polarity */ + + uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BDTRInitTypeDef; + +/** + * @brief TIM Input Capture Init structure definition + */ + +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup TIM_Exported_constants + * @{ + */ + +#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST1: TIM 1 */ +#define IS_TIM_LIST1_PERIPH(PERIPH) ((PERIPH) == TIM1) + +/* LIST2: TIM 1, 15, 16 and 17 */ +#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST3: TIM 1, 2 and 3 */ +#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3)) + +/* LIST4: TIM 1, 2, 3, 14, 15, 16 and 17 */ +#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM14) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST5: TIM 1, 2, 3, 15, 16 and 17 */ +#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST6: TIM 1, 2, 3 and 15 */ +#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM15)) + +/* LIST7: TIM 1, 2, 3, 6, 7 and 14 */ +#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM14)) + +/* LIST8: TIM 1, 2, 3 and 14 */ +#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM14)) + +/* LIST9: TIM 1, 2, 3, 6, 7 and 15 */ +#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM15)) + +/* LIST10: TIM 1, 2, 3, 6, 7, 15, 16 and 17 */ +#define IS_TIM_LIST10_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST1: TIM 11 */ +#define IS_TIM_LIST11_PERIPH(PERIPH) ((PERIPH) == TIM14) + + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes + * @{ + */ + +#define TIM_OCMode_Timing ((uint16_t)0x0000) +#define TIM_OCMode_Active ((uint16_t)0x0010) +#define TIM_OCMode_Inactive ((uint16_t)0x0020) +#define TIM_OCMode_Toggle ((uint16_t)0x0030) +#define TIM_OCMode_PWM1 ((uint16_t)0x0060) +#define TIM_OCMode_PWM2 ((uint16_t)0x0070) +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2)) +#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2) || \ + ((MODE) == TIM_ForcedAction_Active) || \ + ((MODE) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode + * @{ + */ + +#define TIM_OPMode_Single ((uint16_t)0x0008) +#define TIM_OPMode_Repetitive ((uint16_t)0x0000) +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ + ((MODE) == TIM_OPMode_Repetitive)) +/** + * @} + */ + +/** @defgroup TIM_Channel + * @{ + */ + +#define TIM_Channel_1 ((uint16_t)0x0000) +#define TIM_Channel_2 ((uint16_t)0x0004) +#define TIM_Channel_3 ((uint16_t)0x0008) +#define TIM_Channel_4 ((uint16_t)0x000C) + +#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3) || \ + ((CHANNEL) == TIM_Channel_4)) +#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3)) +#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2)) + +/** + * @} + */ + +/** @defgroup TIM_Clock_Division_CKD + * @{ + */ + +#define TIM_CKD_DIV1 ((uint16_t)0x0000) +#define TIM_CKD_DIV2 ((uint16_t)0x0100) +#define TIM_CKD_DIV4 ((uint16_t)0x0200) +#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ + ((DIV) == TIM_CKD_DIV2) || \ + ((DIV) == TIM_CKD_DIV4)) +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode + * @{ + */ + +#define TIM_CounterMode_Up ((uint16_t)0x0000) +#define TIM_CounterMode_Down ((uint16_t)0x0010) +#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) +#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) +#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ + ((MODE) == TIM_CounterMode_Down) || \ + ((MODE) == TIM_CounterMode_CenterAligned1) || \ + ((MODE) == TIM_CounterMode_CenterAligned2) || \ + ((MODE) == TIM_CounterMode_CenterAligned3)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity + * @{ + */ + +#define TIM_OCPolarity_High ((uint16_t)0x0000) +#define TIM_OCPolarity_Low ((uint16_t)0x0002) +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ + ((POLARITY) == TIM_OCPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity + * @{ + */ + +#define TIM_OCNPolarity_High ((uint16_t)0x0000) +#define TIM_OCNPolarity_Low ((uint16_t)0x0008) +#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ + ((POLARITY) == TIM_OCNPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_state + * @{ + */ + +#define TIM_OutputState_Disable ((uint16_t)0x0000) +#define TIM_OutputState_Enable ((uint16_t)0x0001) +#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ + ((STATE) == TIM_OutputState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_state + * @{ + */ + +#define TIM_OutputNState_Disable ((uint16_t)0x0000) +#define TIM_OutputNState_Enable ((uint16_t)0x0004) +#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ + ((STATE) == TIM_OutputNState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_state + * @{ + */ + +#define TIM_CCx_Enable ((uint16_t)0x0001) +#define TIM_CCx_Disable ((uint16_t)0x0000) +#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ + ((CCX) == TIM_CCx_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_N_state + * @{ + */ + +#define TIM_CCxN_Enable ((uint16_t)0x0004) +#define TIM_CCxN_Disable ((uint16_t)0x0000) +#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ + ((CCXN) == TIM_CCxN_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable + * @{ + */ + +#define TIM_Break_Enable ((uint16_t)0x1000) +#define TIM_Break_Disable ((uint16_t)0x0000) +#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ + ((STATE) == TIM_Break_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity + * @{ + */ + +#define TIM_BreakPolarity_Low ((uint16_t)0x0000) +#define TIM_BreakPolarity_High ((uint16_t)0x2000) +#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ + ((POLARITY) == TIM_BreakPolarity_High)) +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset + * @{ + */ + +#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) +#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ + ((STATE) == TIM_AutomaticOutput_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Lock_level + * @{ + */ + +#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) +#define TIM_LOCKLevel_1 ((uint16_t)0x0100) +#define TIM_LOCKLevel_2 ((uint16_t)0x0200) +#define TIM_LOCKLevel_3 ((uint16_t)0x0300) +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ + ((LEVEL) == TIM_LOCKLevel_1) || \ + ((LEVEL) == TIM_LOCKLevel_2) || \ + ((LEVEL) == TIM_LOCKLevel_3)) +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state + * @{ + */ + +#define TIM_OSSIState_Enable ((uint16_t)0x0400) +#define TIM_OSSIState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ + ((STATE) == TIM_OSSIState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state + * @{ + */ + +#define TIM_OSSRState_Enable ((uint16_t)0x0800) +#define TIM_OSSRState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ + ((STATE) == TIM_OSSRState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State + * @{ + */ + +#define TIM_OCIdleState_Set ((uint16_t)0x0100) +#define TIM_OCIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ + ((STATE) == TIM_OCIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State + * @{ + */ + +#define TIM_OCNIdleState_Set ((uint16_t)0x0200) +#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ + ((STATE) == TIM_OCNIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity + * @{ + */ + +#define TIM_ICPolarity_Rising ((uint16_t)0x0000) +#define TIM_ICPolarity_Falling ((uint16_t)0x0002) +#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)|| \ + ((POLARITY) == TIM_ICPolarity_BothEdge)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection + * @{ + */ + +#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively. */ +#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ + ((SELECTION) == TIM_ICSelection_IndirectTI) || \ + ((SELECTION) == TIM_ICSelection_TRC)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler + * @{ + */ + +#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ +#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ +#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ +#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_interrupt_sources + * @{ + */ + +#define TIM_IT_Update ((uint16_t)0x0001) +#define TIM_IT_CC1 ((uint16_t)0x0002) +#define TIM_IT_CC2 ((uint16_t)0x0004) +#define TIM_IT_CC3 ((uint16_t)0x0008) +#define TIM_IT_CC4 ((uint16_t)0x0010) +#define TIM_IT_COM ((uint16_t)0x0020) +#define TIM_IT_Trigger ((uint16_t)0x0040) +#define TIM_IT_Break ((uint16_t)0x0080) +#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) + +#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ + ((IT) == TIM_IT_CC1) || \ + ((IT) == TIM_IT_CC2) || \ + ((IT) == TIM_IT_CC3) || \ + ((IT) == TIM_IT_CC4) || \ + ((IT) == TIM_IT_COM) || \ + ((IT) == TIM_IT_Trigger) || \ + ((IT) == TIM_IT_Break)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address + * @{ + */ + +#define TIM_DMABase_CR1 ((uint16_t)0x0000) +#define TIM_DMABase_CR2 ((uint16_t)0x0001) +#define TIM_DMABase_SMCR ((uint16_t)0x0002) +#define TIM_DMABase_DIER ((uint16_t)0x0003) +#define TIM_DMABase_SR ((uint16_t)0x0004) +#define TIM_DMABase_EGR ((uint16_t)0x0005) +#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) +#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) +#define TIM_DMABase_CCER ((uint16_t)0x0008) +#define TIM_DMABase_CNT ((uint16_t)0x0009) +#define TIM_DMABase_PSC ((uint16_t)0x000A) +#define TIM_DMABase_ARR ((uint16_t)0x000B) +#define TIM_DMABase_RCR ((uint16_t)0x000C) +#define TIM_DMABase_CCR1 ((uint16_t)0x000D) +#define TIM_DMABase_CCR2 ((uint16_t)0x000E) +#define TIM_DMABase_CCR3 ((uint16_t)0x000F) +#define TIM_DMABase_CCR4 ((uint16_t)0x0010) +#define TIM_DMABase_BDTR ((uint16_t)0x0011) +#define TIM_DMABase_DCR ((uint16_t)0x0012) +#define TIM_DMABase_OR ((uint16_t)0x0013) +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ + ((BASE) == TIM_DMABase_CR2) || \ + ((BASE) == TIM_DMABase_SMCR) || \ + ((BASE) == TIM_DMABase_DIER) || \ + ((BASE) == TIM_DMABase_SR) || \ + ((BASE) == TIM_DMABase_EGR) || \ + ((BASE) == TIM_DMABase_CCMR1) || \ + ((BASE) == TIM_DMABase_CCMR2) || \ + ((BASE) == TIM_DMABase_CCER) || \ + ((BASE) == TIM_DMABase_CNT) || \ + ((BASE) == TIM_DMABase_PSC) || \ + ((BASE) == TIM_DMABase_ARR) || \ + ((BASE) == TIM_DMABase_RCR) || \ + ((BASE) == TIM_DMABase_CCR1) || \ + ((BASE) == TIM_DMABase_CCR2) || \ + ((BASE) == TIM_DMABase_CCR3) || \ + ((BASE) == TIM_DMABase_CCR4) || \ + ((BASE) == TIM_DMABase_BDTR) || \ + ((BASE) == TIM_DMABase_DCR) || \ + ((BASE) == TIM_DMABase_OR)) +/** + * @} + */ + + +/** @defgroup TIM_DMA_Burst_Length + * @{ + */ + +#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) +#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) +#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) +#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) +#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) +#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) +#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) +#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) +#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) +#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) +#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) +#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) +#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) +#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) +#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) +#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) +#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) +#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ + ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_18Transfers)) +/** + * @} + */ + +/** @defgroup TIM_DMA_sources + * @{ + */ + +#define TIM_DMA_Update ((uint16_t)0x0100) +#define TIM_DMA_CC1 ((uint16_t)0x0200) +#define TIM_DMA_CC2 ((uint16_t)0x0400) +#define TIM_DMA_CC3 ((uint16_t)0x0800) +#define TIM_DMA_CC4 ((uint16_t)0x1000) +#define TIM_DMA_COM ((uint16_t)0x2000) +#define TIM_DMA_Trigger ((uint16_t)0x4000) +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Prescaler + * @{ + */ + +#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) +#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) +#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) +#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) +#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Internal_Trigger_Selection + * @{ + */ + +#define TIM_TS_ITR0 ((uint16_t)0x0000) +#define TIM_TS_ITR1 ((uint16_t)0x0010) +#define TIM_TS_ITR2 ((uint16_t)0x0020) +#define TIM_TS_ITR3 ((uint16_t)0x0030) +#define TIM_TS_TI1F_ED ((uint16_t)0x0040) +#define TIM_TS_TI1FP1 ((uint16_t)0x0050) +#define TIM_TS_TI2FP2 ((uint16_t)0x0060) +#define TIM_TS_ETRF ((uint16_t)0x0070) +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) +#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3)) +/** + * @} + */ + +/** @defgroup TIM_TIx_External_Clock_Source + * @{ + */ + +#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) +#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) +#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Polarity + * @{ + */ +#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) +#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) +#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ + ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) +/** + * @} + */ + +/** @defgroup TIM_Prescaler_Reload_Mode + * @{ + */ + +#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) +#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) +#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ + ((RELOAD) == TIM_PSCReloadMode_Immediate)) +/** + * @} + */ + +/** @defgroup TIM_Forced_Action + * @{ + */ + +#define TIM_ForcedAction_Active ((uint16_t)0x0050) +#define TIM_ForcedAction_InActive ((uint16_t)0x0040) +#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ + ((ACTION) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode + * @{ + */ + +#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) +#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) +#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ + ((MODE) == TIM_EncoderMode_TI2) || \ + ((MODE) == TIM_EncoderMode_TI12)) +/** + * @} + */ + + +/** @defgroup TIM_Event_Source + * @{ + */ + +#define TIM_EventSource_Update ((uint16_t)0x0001) +#define TIM_EventSource_CC1 ((uint16_t)0x0002) +#define TIM_EventSource_CC2 ((uint16_t)0x0004) +#define TIM_EventSource_CC3 ((uint16_t)0x0008) +#define TIM_EventSource_CC4 ((uint16_t)0x0010) +#define TIM_EventSource_COM ((uint16_t)0x0020) +#define TIM_EventSource_Trigger ((uint16_t)0x0040) +#define TIM_EventSource_Break ((uint16_t)0x0080) +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_Update_Source + * @{ + */ + +#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. */ +#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ +#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ + ((SOURCE) == TIM_UpdateSource_Regular)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Preload_State + * @{ + */ + +#define TIM_OCPreload_Enable ((uint16_t)0x0008) +#define TIM_OCPreload_Disable ((uint16_t)0x0000) +#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ + ((STATE) == TIM_OCPreload_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Fast_State + * @{ + */ + +#define TIM_OCFast_Enable ((uint16_t)0x0004) +#define TIM_OCFast_Disable ((uint16_t)0x0000) +#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ + ((STATE) == TIM_OCFast_Disable)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Clear_State + * @{ + */ + +#define TIM_OCClear_Enable ((uint16_t)0x0080) +#define TIM_OCClear_Disable ((uint16_t)0x0000) +#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ + ((STATE) == TIM_OCClear_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Output_Source + * @{ + */ + +#define TIM_TRGOSource_Reset ((uint16_t)0x0000) +#define TIM_TRGOSource_Enable ((uint16_t)0x0010) +#define TIM_TRGOSource_Update ((uint16_t)0x0020) +#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) +#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) +#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) +#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) +#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ + ((SOURCE) == TIM_TRGOSource_Enable) || \ + ((SOURCE) == TIM_TRGOSource_Update) || \ + ((SOURCE) == TIM_TRGOSource_OC1) || \ + ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC4Ref)) +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode + * @{ + */ + +#define TIM_SlaveMode_Reset ((uint16_t)0x0004) +#define TIM_SlaveMode_Gated ((uint16_t)0x0005) +#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) +#define TIM_SlaveMode_External1 ((uint16_t)0x0007) +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ + ((MODE) == TIM_SlaveMode_Gated) || \ + ((MODE) == TIM_SlaveMode_Trigger) || \ + ((MODE) == TIM_SlaveMode_External1)) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode + * @{ + */ + +#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) +#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ + ((STATE) == TIM_MasterSlaveMode_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Flags + * @{ + */ + +#define TIM_FLAG_Update ((uint16_t)0x0001) +#define TIM_FLAG_CC1 ((uint16_t)0x0002) +#define TIM_FLAG_CC2 ((uint16_t)0x0004) +#define TIM_FLAG_CC3 ((uint16_t)0x0008) +#define TIM_FLAG_CC4 ((uint16_t)0x0010) +#define TIM_FLAG_COM ((uint16_t)0x0020) +#define TIM_FLAG_Trigger ((uint16_t)0x0040) +#define TIM_FLAG_Break ((uint16_t)0x0080) +#define TIM_FLAG_CC1OF ((uint16_t)0x0200) +#define TIM_FLAG_CC2OF ((uint16_t)0x0400) +#define TIM_FLAG_CC3OF ((uint16_t)0x0800) +#define TIM_FLAG_CC4OF ((uint16_t)0x1000) +#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ + ((FLAG) == TIM_FLAG_CC1) || \ + ((FLAG) == TIM_FLAG_CC2) || \ + ((FLAG) == TIM_FLAG_CC3) || \ + ((FLAG) == TIM_FLAG_CC4) || \ + ((FLAG) == TIM_FLAG_COM) || \ + ((FLAG) == TIM_FLAG_Trigger) || \ + ((FLAG) == TIM_FLAG_Break) || \ + ((FLAG) == TIM_FLAG_CC1OF) || \ + ((FLAG) == TIM_FLAG_CC2OF) || \ + ((FLAG) == TIM_FLAG_CC3OF) || \ + ((FLAG) == TIM_FLAG_CC4OF)) + + +#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) +/** + * @} + */ + + +/** @defgroup TIM_Input_Capture_Filer_Value + * @{ + */ + +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Filter + * @{ + */ + +#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_OCReferenceClear + * @{ + */ +#define TIM_OCReferenceClear_ETRF ((uint16_t)0x0008) +#define TIM_OCReferenceClear_OCREFCLR ((uint16_t)0x0000) +#define TIM_OCREFERENCECECLEAR_SOURCE(SOURCE) (((SOURCE) == TIM_OCReferenceClear_ETRF) || \ + ((SOURCE) == TIM_OCReferenceClear_OCREFCLR)) + +/** + * @} + */ +/** @defgroup TIM_Remap + * @{ + */ +#define TIM14_GPIO ((uint16_t)0x0000) +#define TIM14_RTC_CLK ((uint16_t)0x0001) +#define TIM14_HSEDiv32 ((uint16_t)0x0002) +#define TIM14_MCO ((uint16_t)0x0003) + +#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM14_GPIO)|| \ + ((TIM_REMAP) == TIM14_RTC_CLK) || \ + ((TIM_REMAP) == TIM14_HSEDiv32) || \ + ((TIM_REMAP) == TIM14_MCO)) +/** + * @} + */ + +/** @defgroup TIM_Legacy + * @{ + */ + +#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer +#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers +#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers +#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers +#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers +#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers +#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers +#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers +#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers +#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers +#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers +#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers +#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers +#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers +#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers +#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers +#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers +#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* TimeBase management ********************************************************/ +void TIM_DeInit(TIM_TypeDef* TIMx); +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); +void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter); +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload); +uint32_t TIM_GetCounter(TIM_TypeDef* TIMx); +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Advanced-control timers (TIM1) specific features*******************/ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Output Compare management **************************************************/ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1); +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2); +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3); +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4); +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_SelectOCREFClear(TIM_TypeDef* TIMx, uint16_t TIM_OCReferenceClear); +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Input Capture management ***************************************************/ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx); +uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx); +uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx); +uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx); +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); + +/* Interrupts, DMA and flags management ***************************************/ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Clocks management **********************************************************/ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx); +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter); +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); + + +/* Synchronization management *************************************************/ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); + +/* Specific interface management **********************************************/ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Specific remapping management **********************************************/ +void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap); + + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F0XX_TIM_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h new file mode 100644 index 0000000..7a80aa3 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h @@ -0,0 +1,596 @@ +/** + ****************************************************************************** + * @file stm32f0xx_usart.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_USART_H +#define __STM32F0XX_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + + + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ + + uint32_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint32_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint32_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint32_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control*/ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + uint32_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint32_t USART_CPOL; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint32_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint32_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == USART4) || \ + ((PERIPH) == USART5) || \ + ((PERIPH) == USART6) || \ + ((PERIPH) == USART7) || \ + ((PERIPH) == USART8)) + +#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3)) + +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint32_t)0x00000000) +#define USART_WordLength_9b USART_CR1_M /* should be ((uint32_t)0x00001000) */ +#define USART_WordLength_7b ((uint32_t)0x10001000) /*!< only available for STM32F072 and STM32F030 devices */ +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b) || \ + ((LENGTH) == USART_WordLength_7b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint32_t)0x00000000) +#define USART_StopBits_2 USART_CR2_STOP_1 +#define USART_StopBits_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint32_t)0x00000000) +#define USART_Parity_Even USART_CR1_PCE +#define USART_Parity_Odd (USART_CR1_PCE | USART_CR1_PS) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx USART_CR1_RE +#define USART_Mode_Tx USART_CR1_TE +#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && \ + ((MODE) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ + +#define USART_HardwareFlowControl_None ((uint32_t)0x00000000) +#define USART_HardwareFlowControl_RTS USART_CR3_RTSE +#define USART_HardwareFlowControl_CTS USART_CR3_CTSE +#define USART_HardwareFlowControl_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ + +#define USART_Clock_Disable ((uint32_t)0x00000000) +#define USART_Clock_Enable USART_CR2_CLKEN +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint32_t)0x00000000) +#define USART_CPOL_High USART_CR2_CPOL +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint32_t)0x00000000) +#define USART_CPHA_2Edge USART_CR2_CPHA +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint32_t)0x00000000) +#define USART_LastBit_Enable USART_CR2_LBCL +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx USART_CR3_DMAT +#define USART_DMAReq_Rx USART_CR3_DMAR +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint32_t)0xFFFFFF3F) == 0x00) && \ + ((DMAREQ) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_DMA_Recception_Error + * @{ + */ + +#define USART_DMAOnError_Enable ((uint32_t)0x00000000) +#define USART_DMAOnError_Disable USART_CR3_DDRE +#define IS_USART_DMAONERROR(DMAERROR) (((DMAERROR) == USART_DMAOnError_Disable)|| \ + ((DMAERROR) == USART_DMAOnError_Enable)) +/** + * @} + */ + +/** @defgroup USART_MuteMode_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint32_t)0x00000000) +#define USART_WakeUp_AddressMark USART_CR1_WAKE +#define IS_USART_MUTEMODE_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_Address_Detection + * @{ + */ + +#define USART_AddressLength_4b ((uint32_t)0x00000000) +#define USART_AddressLength_7b USART_CR2_ADDM7 +#define IS_USART_ADDRESS_DETECTION(ADDRESS) (((ADDRESS) == USART_AddressLength_4b) || \ + ((ADDRESS) == USART_AddressLength_7b)) +/** + * @} + */ + +/** @defgroup USART_StopMode_WakeUp_methods + * @note These parameters are only available for STM32F051 and STM32F072 devices + * @{ + */ + +#define USART_WakeUpSource_AddressMatch ((uint32_t)0x00000000) +#define USART_WakeUpSource_StartBit USART_CR3_WUS_1 +#define USART_WakeUpSource_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) +#define IS_USART_STOPMODE_WAKEUPSOURCE(SOURCE) (((SOURCE) == USART_WakeUpSource_AddressMatch) || \ + ((SOURCE) == USART_WakeUpSource_StartBit) || \ + ((SOURCE) == USART_WakeUpSource_RXNE)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint32_t)0x00000000) +#define USART_LINBreakDetectLength_11b USART_CR2_LBDL +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower USART_CR3_IRLP +#define USART_IrDAMode_Normal ((uint32_t)0x00000000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_DE_Polarity + * @{ + */ + +#define USART_DEPolarity_High ((uint32_t)0x00000000) +#define USART_DEPolarity_Low USART_CR3_DEP +#define IS_USART_DE_POLARITY(POLARITY) (((POLARITY) == USART_DEPolarity_Low) || \ + ((POLARITY) == USART_DEPolarity_High)) +/** + * @} + */ + +/** @defgroup USART_Inversion_Pins + * @{ + */ + +#define USART_InvPin_Tx USART_CR2_TXINV +#define USART_InvPin_Rx USART_CR2_RXINV +#define IS_USART_INVERSTION_PIN(PIN) ((((PIN) & (uint32_t)0xFFFCFFFF) == 0x00) && \ + ((PIN) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_AutoBaudRate_Mode + * @{ + */ + +#define USART_AutoBaudRate_StartBit ((uint32_t)0x00000000) +#define USART_AutoBaudRate_FallingEdge USART_CR2_ABRMODE_0 +#define IS_USART_AUTOBAUDRATE_MODE(MODE) (((MODE) == USART_AutoBaudRate_StartBit) || \ + ((MODE) == USART_AutoBaudRate_FallingEdge)) +/** + * @} + */ + +/** @defgroup USART_OVR_DETECTION + * @{ + */ + +#define USART_OVRDetection_Enable ((uint32_t)0x00000000) +#define USART_OVRDetection_Disable USART_CR3_OVRDIS +#define IS_USART_OVRDETECTION(OVR) (((OVR) == USART_OVRDetection_Enable)|| \ + ((OVR) == USART_OVRDetection_Disable)) +/** + * @} + */ +/** @defgroup USART_Request + * @{ + */ + +#define USART_Request_ABRRQ USART_RQR_ABRRQ +#define USART_Request_SBKRQ USART_RQR_SBKRQ +#define USART_Request_MMRQ USART_RQR_MMRQ +#define USART_Request_RXFRQ USART_RQR_RXFRQ +#define USART_Request_TXFRQ USART_RQR_TXFRQ + +#define IS_USART_REQUEST(REQUEST) (((REQUEST) == USART_Request_TXFRQ) || \ + ((REQUEST) == USART_Request_RXFRQ) || \ + ((REQUEST) == USART_Request_MMRQ) || \ + ((REQUEST) == USART_Request_SBKRQ) || \ + ((REQUEST) == USART_Request_ABRRQ)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ +#define USART_FLAG_REACK USART_ISR_REACK +#define USART_FLAG_TEACK USART_ISR_TEACK +#define USART_FLAG_WU USART_ISR_WUF /*!< Not available for STM32F030 devices */ +#define USART_FLAG_RWU USART_ISR_RWU /*!< Not available for STM32F030 devices */ +#define USART_FLAG_SBK USART_ISR_SBKF +#define USART_FLAG_CM USART_ISR_CMF +#define USART_FLAG_BUSY USART_ISR_BUSY +#define USART_FLAG_ABRF USART_ISR_ABRF +#define USART_FLAG_ABRE USART_ISR_ABRE +#define USART_FLAG_EOB USART_ISR_EOBF /*!< Not available for STM32F030 devices */ +#define USART_FLAG_RTO USART_ISR_RTOF +#define USART_FLAG_nCTSS USART_ISR_CTS +#define USART_FLAG_CTS USART_ISR_CTSIF +#define USART_FLAG_LBD USART_ISR_LBD /*!< Not available for STM32F030 devices */ +#define USART_FLAG_TXE USART_ISR_TXE +#define USART_FLAG_TC USART_ISR_TC +#define USART_FLAG_RXNE USART_ISR_RXNE +#define USART_FLAG_IDLE USART_ISR_IDLE +#define USART_FLAG_ORE USART_ISR_ORE +#define USART_FLAG_NE USART_ISR_NE +#define USART_FLAG_FE USART_ISR_FE +#define USART_FLAG_PE USART_ISR_PE +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \ + ((FLAG) == USART_FLAG_nCTSS) || ((FLAG) == USART_FLAG_RTO) || \ + ((FLAG) == USART_FLAG_EOB) || ((FLAG) == USART_FLAG_ABRE) || \ + ((FLAG) == USART_FLAG_ABRF) || ((FLAG) == USART_FLAG_BUSY) || \ + ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_SBK) || \ + ((FLAG) == USART_FLAG_RWU) || ((FLAG) == USART_FLAG_WU) || \ + ((FLAG) == USART_FLAG_TEACK)|| ((FLAG) == USART_FLAG_REACK)) + +#define IS_USART_CLEAR_FLAG(FLAG) (((FLAG) == USART_FLAG_WU) || ((FLAG) == USART_FLAG_TC) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \ + ((FLAG) == USART_FLAG_LBD) || ((FLAG) == USART_FLAG_CTS) || \ + ((FLAG) == USART_FLAG_RTO) || ((FLAG) == USART_FLAG_EOB) || \ + ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_PE)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @brief USART Interrupt definition + * USART_IT possible values + * Elements values convention: 0xZZZZYYXX + * XX: Position of the corresponding Interrupt + * YY: Register index + * ZZZZ: Flag position + * @{ + */ + +#define USART_IT_WU ((uint32_t)0x00140316) /*!< Not available for STM32F030 devices */ +#define USART_IT_CM ((uint32_t)0x0011010E) +#define USART_IT_EOB ((uint32_t)0x000C011B) /*!< Not available for STM32F030 devices */ +#define USART_IT_RTO ((uint32_t)0x000B011A) +#define USART_IT_PE ((uint32_t)0x00000108) +#define USART_IT_TXE ((uint32_t)0x00070107) +#define USART_IT_TC ((uint32_t)0x00060106) +#define USART_IT_RXNE ((uint32_t)0x00050105) +#define USART_IT_IDLE ((uint32_t)0x00040104) +#define USART_IT_LBD ((uint32_t)0x00080206) /*!< Not available for STM32F030 devices */ +#define USART_IT_CTS ((uint32_t)0x0009030A) +#define USART_IT_ERR ((uint32_t)0x00000300) +#define USART_IT_ORE ((uint32_t)0x00030300) +#define USART_IT_NE ((uint32_t)0x00020300) +#define USART_IT_FE ((uint32_t)0x00010300) + +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR) || \ + ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \ + ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU)) + +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE) || \ + ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \ + ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU)) + +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_PE) || \ + ((IT) == USART_IT_FE) || ((IT) == USART_IT_NE) || \ + ((IT) == USART_IT_ORE) || ((IT) == USART_IT_IDLE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS) || \ + ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \ + ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU)) +/** + * @} + */ + +/** @defgroup USART_Global_definition + * @{ + */ + +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x005B8D81)) +#define IS_USART_DE_ASSERTION_DEASSERTION_TIME(TIME) ((TIME) <= 0x1F) +#define IS_USART_AUTO_RETRY_COUNTER(COUNTER) ((COUNTER) <= 0x7) +#define IS_USART_TIMEOUT(TIMEOUT) ((TIMEOUT) <= 0x00FFFFFF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Initialization and Configuration functions *********************************/ +void USART_DeInit(USART_TypeDef* USARTx); +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_DirectionModeCmd(USART_TypeDef* USARTx, uint32_t USART_DirectionMode, FunctionalState NewState); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); /* Not available for STM32F030 devices */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_MSBFirstCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_DataInvCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_InvPinCmd(USART_TypeDef* USARTx, uint32_t USART_InvPin, FunctionalState NewState); +void USART_SWAPPinCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_ReceiverTimeOutCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SetReceiverTimeOut(USART_TypeDef* USARTx, uint32_t USART_ReceiverTimeOut); + +/* STOP Mode functions ********************************************************/ +void USART_STOPModeCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_StopModeWakeUpSourceConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUpSource); /* Not available for STM32F030 devices */ + +/* AutoBaudRate functions *****************************************************/ +void USART_AutoBaudRateCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_AutoBaudRateConfig(USART_TypeDef* USARTx, uint32_t USART_AutoBaudRate); + +/* Data transfers functions ***************************************************/ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); + +/* Multi-Processor Communication functions ************************************/ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_MuteModeWakeUpConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUp); +void USART_MuteModeCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_AddressDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_AddressLength); + +/* LIN mode functions *********************************************************/ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint32_t USART_LINBreakDetectLength); /* Not available for STM32F030 devices */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ + +/* Half-duplex mode function **************************************************/ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* Smartcard mode functions ***************************************************/ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); /* Not available for STM32F030 devices */ +void USART_SetAutoRetryCount(USART_TypeDef* USARTx, uint8_t USART_AutoCount); /* Not available for STM32F030 devices */ +void USART_SetBlockLength(USART_TypeDef* USARTx, uint8_t USART_BlockLength); /* Not available for STM32F030 devices */ + +/* IrDA mode functions ********************************************************/ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint32_t USART_IrDAMode); /* Not available for STM32F030 devices */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ + +/* RS485 mode functions *******************************************************/ +void USART_DECmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_DEPolarityConfig(USART_TypeDef* USARTx, uint32_t USART_DEPolarity); +void USART_SetDEAssertionTime(USART_TypeDef* USARTx, uint32_t USART_DEAssertionTime); +void USART_SetDEDeassertionTime(USART_TypeDef* USARTx, uint32_t USART_DEDeassertionTime); + +/* DMA transfers management functions *****************************************/ +void USART_DMACmd(USART_TypeDef* USARTx, uint32_t USART_DMAReq, FunctionalState NewState); +void USART_DMAReceptionErrorConfig(USART_TypeDef* USARTx, uint32_t USART_DMAOnError); + +/* Interrupts and flags management functions **********************************/ +void USART_ITConfig(USART_TypeDef* USARTx, uint32_t USART_IT, FunctionalState NewState); +void USART_RequestCmd(USART_TypeDef* USARTx, uint32_t USART_Request, FunctionalState NewState); +void USART_OverrunDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_OVRDetection); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint32_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint32_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint32_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint32_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_USART_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_wwdg.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_wwdg.h new file mode 100644 index 0000000..1aa7bb0 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_wwdg.h @@ -0,0 +1,101 @@ +/** + ****************************************************************************** + * @file stm32f0xx_wwdg.h + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file contains all the functions prototypes for the WWDG + * firmware library. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_WWDG_H +#define __STM32F0XX_WWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Constants + * @{ + */ + +/** @defgroup WWDG_Prescaler + * @{ + */ + +#define WWDG_Prescaler_1 ((uint32_t)0x00000000) +#define WWDG_Prescaler_2 ((uint32_t)0x00000080) +#define WWDG_Prescaler_4 ((uint32_t)0x00000100) +#define WWDG_Prescaler_8 ((uint32_t)0x00000180) +#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ + ((PRESCALER) == WWDG_Prescaler_2) || \ + ((PRESCALER) == WWDG_Prescaler_4) || \ + ((PRESCALER) == WWDG_Prescaler_8)) +#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) +#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Function used to set the WWDG configuration to the default reset state ****/ +void WWDG_DeInit(void); + +/* Prescaler, Refresh window and Counter configuration functions **************/ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); +void WWDG_SetWindowValue(uint8_t WindowValue); +void WWDG_EnableIT(void); +void WWDG_SetCounter(uint8_t Counter); + +/* WWDG activation functions **************************************************/ +void WWDG_Enable(uint8_t Counter); + +/* Interrupts and flags management functions **********************************/ +FlagStatus WWDG_GetFlagStatus(void); +void WWDG_ClearFlag(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_WWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_adc.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_adc.c new file mode 100644 index 0000000..fce6851 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_adc.c @@ -0,0 +1,1232 @@ +/** + ****************************************************************************** + * @file stm32f0xx_adc.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) peripheral: + * + Initialization and Configuration + * + Power saving + * + Analog Watchdog configuration + * + Temperature Sensor, Vrefint (Internal Reference Voltage) and + * Vbat (Voltage battery) management + * + ADC Channels Configuration + * + ADC Channels DMA Configuration + * + Interrupts and flags management + * + * @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (#) Enable the ADC interface clock using + RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE); + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs using the following function: + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOx, ENABLE); + (++) Configure these ADC pins in analog mode using GPIO_Init(); + (#) Configure the ADC conversion resolution, data alignment, external + trigger and edge, scan direction and Enable/Disable the continuous mode + using the ADC_Init() function. + (#) Activate the ADC peripheral using ADC_Cmd() function. + + *** ADC channels group configuration *** + ============================================ + [..] + (+) To configure the ADC channels features, use ADC_Init() and + ADC_ChannelConfig() functions. + (+) To activate the continuous mode, use the ADC_ContinuousModeCmd() + function. + (+) To activate the Discontinuous mode, use the ADC_DiscModeCmd() functions. + (+) To activate the overrun mode, use the ADC_OverrunModeCmd() functions. + (+) To activate the calibration mode, use the ADC_GetCalibrationFactor() functions. + (+) To read the ADC converted values, use the ADC_GetConversionValue() + function. + + *** DMA for ADC channels features configuration *** + ============================================================= + [..] + (+) To enable the DMA mode for ADC channels group, use the ADC_DMACmd() function. + (+) To configure the DMA transfer request, use ADC_DMARequestModeConfig() function. + + * @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_adc.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* ADC CFGR mask */ +#define CFGR1_CLEAR_MASK ((uint32_t)0xFFFFD203) + +/* Calibration time out */ +#define CALIBRATION_TIMEOUT ((uint32_t)0x0000F000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** @defgroup ADC_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC Prescaler + (+) ADC Conversion Resolution (12bit..6bit) + (+) ADC Continuous Conversion Mode (Continuous or Single conversion) + (+) External trigger Edge and source + (+) Converted data alignment (left or right) + (+) The direction in which the channels will be scanned in the sequence + (+) Enable or disable the ADC peripheral + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes ADC1 peripheral registers to their default reset values. + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @retval None + */ +void ADC_DeInit(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + if(ADCx == ADC1) + { + /* Enable ADC1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + + /* Release ADC1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @note This function is used to configure the global features of the ADC ( + * Resolution, Data Alignment, continuous mode activation, External + * trigger source and edge, Sequence Scan Direction). + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_RESOLUTION(ADC_InitStruct->ADC_Resolution)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG_EDGE(ADC_InitStruct->ADC_ExternalTrigConvEdge)); + assert_param(IS_ADC_EXTERNAL_TRIG_CONV(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_SCAN_DIRECTION(ADC_InitStruct->ADC_ScanDirection)); + + /* Get the ADCx CFGR value */ + tmpreg = ADCx->CFGR1; + + /* Clear SCANDIR, RES[1:0], ALIGN, EXTSEL[2:0], EXTEN[1:0] and CONT bits */ + tmpreg &= CFGR1_CLEAR_MASK; + + /*---------------------------- ADCx CFGR Configuration ---------------------*/ + + /* Set RES[1:0] bits according to ADC_Resolution value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + /* Set EXTEN[1:0] bits according to ADC_ExternalTrigConvEdge value */ + /* Set EXTSEL[2:0] bits according to ADC_ExternalTrigConv value */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set SCANDIR bit according to ADC_ScanDirection value */ + + tmpreg |= (uint32_t)(ADC_InitStruct->ADC_Resolution | ((uint32_t)(ADC_InitStruct->ADC_ContinuousConvMode) << 13) | + ADC_InitStruct->ADC_ExternalTrigConvEdge | ADC_InitStruct->ADC_ExternalTrigConv | + ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ScanDirection); + + /* Write to ADCx CFGR */ + ADCx->CFGR1 = tmpreg; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @note This function is used to initialize the global features of the ADC ( + * Resolution, Data Alignment, continuous mode activation, External + * trigger source and edge, Sequence Scan Direction). + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Resolution member */ + ADC_InitStruct->ADC_Resolution = ADC_Resolution_12b; + + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + + /* Initialize the ADC_ExternalTrigConvEdge member */ + ADC_InitStruct->ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None; + + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_TRGO; + + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + + /* Initialize the ADC_ScanDirection member */ + ADC_InitStruct->ADC_ScanDirection = ADC_ScanDirection_Upward; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the ADEN bit to Enable the ADC peripheral */ + ADCx->CR |= (uint32_t)ADC_CR_ADEN; + } + else + { + /* Set the ADDIS to Disable the ADC peripheral */ + ADCx->CR |= (uint32_t)ADC_CR_ADDIS; + } +} + +/** + * @brief Configure the ADC to either be clocked by the asynchronous clock(which is + * independent, the dedicated 14MHz clock) or the synchronous clock derived from + * the APB clock of the ADC bus interface divided by 2 or 4 + * @note This function can be called only when ADC is disabled. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_ClockMode: This parameter can be : + * @arg ADC_ClockMode_AsynClk: ADC clocked by the dedicated 14MHz clock + * @arg ADC_ClockMode_SynClkDiv2: ADC clocked by PCLK/2 + * @arg ADC_ClockMode_SynClkDiv4: ADC clocked by PCLK/4 + * @retval None + */ +void ADC_ClockModeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ClockMode) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLOCKMODE(ADC_ClockMode)); + + /* Configure the ADC Clock mode according to ADC_ClockMode */ + ADCx->CFGR2 = (uint32_t)ADC_ClockMode; + +} + +/** + * @brief Enables or disables the jitter when the ADC is clocked by PCLK div2 + * or div4 + * @note This function is obsolete and maintained for legacy purpose only. ADC_ClockModeConfig() + * function should be used instead. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_JitterOff: This parameter can be : + * @arg ADC_JitterOff_PCLKDiv2: Remove jitter when ADC is clocked by PLCK divided by 2 + * @arg ADC_JitterOff_PCLKDiv4: Remove jitter when ADC is clocked by PLCK divided by 4 + * @param NewState: new state of the ADCx jitter. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_JitterCmd(ADC_TypeDef* ADCx, uint32_t ADC_JitterOff, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_JITTEROFF(ADC_JitterOff)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Disable Jitter */ + ADCx->CFGR2 |= (uint32_t)ADC_JitterOff; + } + else + { + /* Enable Jitter */ + ADCx->CFGR2 &= (uint32_t)(~ADC_JitterOff); + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group2 Power saving functions + * @brief Power saving functions + * +@verbatim + =============================================================================== + ##### Power saving functions ##### + =============================================================================== + [..] This section provides functions allowing to reduce power consumption. + [..] The two function must be combined to get the maximal benefits: + When the ADC frequency is higher than the CPU one, it is recommended to + (#) Enable the Auto Delayed Conversion mode : + ==> using ADC_WaitModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); + (#) Enable the power off in Delay phases : + ==> using ADC_AutoPowerOffCmd(ADC_TypeDef* ADCx, FunctionalState NewState); + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the ADC Power Off. + * @note ADC power-on and power-off can be managed by hardware to cut the + * consumption when the ADC is not converting. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @note The ADC can be powered down: + * - During the Auto delay phase: The ADC is powered on again at the end + * of the delay (until the previous data is read from the ADC data register). + * - During the ADC is waiting for a trigger event: The ADC is powered up + * at the next trigger event (when the conversion is started). + * @param NewState: new state of the ADCx power Off. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoPowerOffCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the ADC Automatic Power-Off */ + ADCx->CFGR1 |= ADC_CFGR1_AUTOFF; + } + else + { + /* Disable the ADC Automatic Power-Off */ + ADCx->CFGR1 &= (uint32_t)~ADC_CFGR1_AUTOFF; + } +} + +/** + * @brief Enables or disables the Wait conversion mode. + * @note When the CPU clock is not fast enough to manage the data rate, a + * Hardware delay can be introduced between ADC conversions to reduce + * this data rate. + * @note The Hardware delay is inserted after each conversions and until the + * previous data is read from the ADC data register + * @note This is a way to automatically adapt the speed of the ADC to the speed + * of the system which will read the data. + * @note Any hardware triggers wich occur while a conversion is on going or + * while the automatic Delay is applied are ignored + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the ADCx Auto-Delay. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_WaitModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the ADC Automatic Delayed conversion */ + ADCx->CFGR1 |= ADC_CFGR1_WAIT; + } + else + { + /* Disable the ADC Automatic Delayed conversion */ + ADCx->CFGR1 &= (uint32_t)~ADC_CFGR1_WAIT; + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group3 Analog Watchdog configuration functions + * @brief Analog Watchdog configuration functions + * +@verbatim + =============================================================================== + ##### Analog Watchdog configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the Analog Watchdog + (AWD) feature in the ADC. + [..] A typical configuration Analog Watchdog is done following these steps : + (#) the ADC guarded channel(s) is (are) selected using the + ADC_AnalogWatchdogSingleChannelConfig() function. + (#) The Analog watchdog lower and higher threshold are configured using the + ADC_AnalogWatchdogThresholdsConfig() function. + (#) The Analog watchdog is enabled and configured to enable the check, on one + or more channels, using the ADC_AnalogWatchdogCmd() function. + (#) Enable the analog watchdog on the selected channel using + ADC_AnalogWatchdogSingleChannelCmd() function + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the analog watchdog + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the ADCx Analog Watchdog. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the ADC Analog Watchdog */ + ADCx->CFGR1 |= ADC_CFGR1_AWDEN; + } + else + { + /* Disable the ADC Analog Watchdog */ + ADCx->CFGR1 &= (uint32_t)~ADC_CFGR1_AWDEN; + } +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + + /* Set the ADCx high and low threshold */ + ADCx->TR = LowThreshold | ((uint32_t)HighThreshold << 16); + +} + +/** + * @brief Configures the analog watchdog guarded single channel + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_AnalogWatchdog_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_Channel_0: ADC Channel0 selected + * @arg ADC_AnalogWatchdog_Channel_1: ADC Channel1 selected + * @arg ADC_AnalogWatchdog_Channel_2: ADC Channel2 selected + * @arg ADC_AnalogWatchdog_Channel_3: ADC Channel3 selected + * @arg ADC_AnalogWatchdog_Channel_4: ADC Channel4 selected + * @arg ADC_AnalogWatchdog_Channel_5: ADC Channel5 selected + * @arg ADC_AnalogWatchdog_Channel_6: ADC Channel6 selected + * @arg ADC_AnalogWatchdog_Channel_7: ADC Channel7 selected + * @arg ADC_AnalogWatchdog_Channel_8: ADC Channel8 selected + * @arg ADC_AnalogWatchdog_Channel_9: ADC Channel9 selected + * @arg ADC_AnalogWatchdog_Channel_10: ADC Channel10 selected, not available for STM32F031 devices + * @arg ADC_AnalogWatchdog_Channel_11: ADC Channel11 selected, not available for STM32F031 devices + * @arg ADC_AnalogWatchdog_Channel_12: ADC Channel12 selected, not available for STM32F031 devices + * @arg ADC_AnalogWatchdog_Channel_13: ADC Channel13 selected, not available for STM32F031 devices + * @arg ADC_AnalogWatchdog_Channel_14: ADC Channel14 selected, not available for STM32F031 devices + * @arg ADC_AnalogWatchdog_Channel_15: ADC Channel15 selected, not available for STM32F031 devices + * @arg ADC_AnalogWatchdog_Channel_16: ADC Channel16 selected + * @arg ADC_AnalogWatchdog_Channel_17: ADC Channel17 selected + * @arg ADC_AnalogWatchdog_Channel_18: ADC Channel18 selected, not available for STM32F030 devices + * @note The channel selected on the AWDCH must be also set into the CHSELR + * register + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog_Channel) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG_CHANNEL(ADC_AnalogWatchdog_Channel)); + + /* Get the old register value */ + tmpreg = ADCx->CFGR1; + + /* Clear the Analog watchdog channel select bits */ + tmpreg &= ~ADC_CFGR1_AWDCH; + + /* Set the Analog watchdog channel */ + tmpreg |= ADC_AnalogWatchdog_Channel; + + /* Store the new register value */ + ADCx->CFGR1 = tmpreg; +} + +/** + * @brief Enables or disables the ADC Analog Watchdog Single Channel. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the ADCx ADC Analog Watchdog Single Channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the ADC Analog Watchdog Single Channel */ + ADCx->CFGR1 |= ADC_CFGR1_AWDSGL; + } + else + { + /* Disable the ADC Analog Watchdog Single Channel */ + ADCx->CFGR1 &= (uint32_t)~ADC_CFGR1_AWDSGL; + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group4 Temperature Sensor, Vrefint and Vbat management functions + * @brief Temperature Sensor, Vrefint and Vbat management functions + * +@verbatim + =============================================================================== + ##### Temperature Sensor, Vrefint and Vbat management function ##### + =============================================================================== + [..] This section provides a function allowing to enable/disable the internal + connections between the ADC and the Temperature Sensor, the Vrefint and + Vbat source. + + [..] A typical configuration to get the Temperature sensor, Vrefint and Vbat channels + voltages is done following these steps : + (#) Enable the internal connection of Temperature sensor, Vrefint or Vbat sources + with the ADC channels using ADC_TempSensorCmd(), ADC_VrefintCmd() or ADC_VbatCmd() + functions. + (#) select the ADC_Channel_16(Temperature sensor), ADC_Channel_17(Vrefint) + or ADC_Channel_18(Voltage battery) using ADC_ChannelConfig() function + (#) Get the voltage values, using ADC_GetConversionValue() function + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the temperature sensor channel. + * @param NewState: new state of the temperature sensor input channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the temperature sensor channel*/ + ADC->CCR |= (uint32_t)ADC_CCR_TSEN; + } + else + { + /* Disable the temperature sensor channel*/ + ADC->CCR &= (uint32_t)(~ADC_CCR_TSEN); + } +} + +/** + * @brief Enables or disables the Vrefint channel. + * @param NewState: new state of the Vref input channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_VrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Vrefint channel*/ + ADC->CCR |= (uint32_t)ADC_CCR_VREFEN; + } + else + { + /* Disable the Vrefint channel*/ + ADC->CCR &= (uint32_t)(~ADC_CCR_VREFEN); + } +} + +/** + * @brief Enables or disables the Vbat channel. + * @note This feature is not applicable for STM32F030 devices. + * @param NewState: new state of the Vbat input channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_VbatCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Vbat channel*/ + ADC->CCR |= (uint32_t)ADC_CCR_VBATEN; + } + else + { + /* Disable the Vbat channel*/ + ADC->CCR &= (uint32_t)(~ADC_CCR_VBATEN); + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group5 Channels Configuration functions + * @brief Channels Configuration functions + * +@verbatim + =============================================================================== + ##### Channels Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to manage the ADC channels, + it is composed of 3 sub sections : + (#) Configuration and management functions for ADC channels: This subsection + provides functions allowing to configure the ADC channels : + (++) Select the ADC channels + (++) Activate ADC Calibration + (++) Activate the Overrun Mode. + (++) Activate the Discontinuous Mode + (++) Activate the Continuous Mode. + (++) Configure the sampling time for each channel + (++) Select the conversion Trigger and Edge for ADC channels + (++) Select the scan direction. + -@@- Please Note that the following features for ADC channels are configurated + using the ADC_Init() function : + (+@@) Activate the Continuous Mode (can be also activated by ADC_OverrunModeCmd(). + (+@@) Select the conversion Trigger and Edge for ADC channels + (+@@) Select the scan direction. + (#) Control the ADC peripheral : This subsection permits to command the ADC: + (++) Stop or discard an on-going conversion (ADSTP command) + (++) Start the ADC conversion . + (#) Get the conversion data: This subsection provides an important function in + the ADC peripheral since it returns the converted data of the current + ADC channel. When the Conversion value is read, the EOC Flag is + automatically cleared. + +@endverbatim + * @{ + */ + +/** + * @brief Configures for the selected ADC and its sampling time. + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be any combination of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected, not available for STM32F031 devices + * @arg ADC_Channel_11: ADC Channel11 selected, not available for STM32F031 devices + * @arg ADC_Channel_12: ADC Channel12 selected, not available for STM32F031 devices + * @arg ADC_Channel_13: ADC Channel13 selected, not available for STM32F031 devices + * @arg ADC_Channel_14: ADC Channel14 selected, not available for STM32F031 devices + * @arg ADC_Channel_15: ADC Channel15 selected, not available for STM32F031 devices + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected, not available for STM32F030 devices + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1_5Cycles: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7_5Cycles: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13_5Cycles: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28_5Cycles: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41_5Cycles: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55_5Cycles: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71_5Cycles: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239_5Cycles: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_ChannelConfig(ADC_TypeDef* ADCx, uint32_t ADC_Channel, uint32_t ADC_SampleTime) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + + /* Configure the ADC Channel */ + ADCx->CHSELR |= (uint32_t)ADC_Channel; + + /* Clear the Sampling time Selection bits */ + tmpreg &= ~ADC_SMPR1_SMPR; + + /* Set the ADC Sampling Time register */ + tmpreg |= (uint32_t)ADC_SampleTime; + + /* Configure the ADC Sample time register */ + ADCx->SMPR = tmpreg ; +} + +/** + * @brief Enable the Continuous mode for the selected ADCx channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the Continuous mode. + * This parameter can be: ENABLE or DISABLE. + * @note It is not possible to have both discontinuous mode and continuous mode + * enabled. In this case (If DISCEN and CONT are Set), the ADC behaves + * as if continuous mode was disabled + * @retval None + */ +void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Continuous mode*/ + ADCx->CFGR1 |= (uint32_t)ADC_CFGR1_CONT; + } + else + { + /* Disable the Continuous mode */ + ADCx->CFGR1 &= (uint32_t)(~ADC_CFGR1_CONT); + } +} + +/** + * @brief Enable the discontinuous mode for the selected ADC channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the discontinuous mode. + * This parameter can be: ENABLE or DISABLE. + * @note It is not possible to have both discontinuous mode and continuous mode + * enabled. In this case (If DISCEN and CONT are Set), the ADC behaves + * as if continuous mode was disabled + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Discontinuous mode */ + ADCx->CFGR1 |= (uint32_t)ADC_CFGR1_DISCEN; + } + else + { + /* Disable the Discontinuous mode */ + ADCx->CFGR1 &= (uint32_t)(~ADC_CFGR1_DISCEN); + } +} + +/** + * @brief Enable the Overrun mode for the selected ADC channels. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the Overrun mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_OverrunModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Overrun mode */ + ADCx->CFGR1 |= (uint32_t)ADC_CFGR1_OVRMOD; + } + else + { + /* Disable the Overrun mode */ + ADCx->CFGR1 &= (uint32_t)(~ADC_CFGR1_OVRMOD); + } +} + +/** + * @brief Active the Calibration operation for the selected ADC. + * @note The Calibration can be initiated only when ADC is still in the + * reset configuration (ADEN must be equal to 0). + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval ADC Calibration factor + */ +uint32_t ADC_GetCalibrationFactor(ADC_TypeDef* ADCx) +{ + uint32_t tmpreg = 0, calibrationcounter = 0, calibrationstatus = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Set the ADC calibartion */ + ADCx->CR |= (uint32_t)ADC_CR_ADCAL; + + /* Wait until no ADC calibration is completed */ + do + { + calibrationstatus = ADCx->CR & ADC_CR_ADCAL; + calibrationcounter++; + } while((calibrationcounter != CALIBRATION_TIMEOUT) && (calibrationstatus != 0x00)); + + if((uint32_t)(ADCx->CR & ADC_CR_ADCAL) == RESET) + { + /*Get the calibration factor from the ADC data register */ + tmpreg = ADCx->DR; + } + else + { + /* Error factor */ + tmpreg = 0x00000000; + } + return tmpreg; +} + +/** + * @brief Stop the on going conversions for the selected ADC. + * @note When ADSTP is set, any on going conversion is aborted, and the ADC + * data register is not updated with current conversion. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval None + */ +void ADC_StopOfConversion(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + ADCx->CR |= (uint32_t)ADC_CR_ADSTP; +} + +/** + * @brief Start Conversion for the selected ADC channels. + * @note In continuous mode, ADSTART is not cleared by hardware with the + * assertion of EOSEQ because the sequence is automatic relaunched + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval None + */ +void ADC_StartOfConversion(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + ADCx->CR |= (uint32_t)ADC_CR_ADSTART; +} + +/** + * @brief Returns the last ADCx conversion result data for ADC channel. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @} + */ + +/** @defgroup ADC_Group6 DMA Configuration functions + * @brief Regular Channels DMA Configuration functions + * +@verbatim + =============================================================================== + ##### DMA Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the DMA for ADC hannels. + Since converted channel values are stored into a unique data register, + it is useful to use DMA for conversion of more than one channel. This + avoids the loss of the data already stored in the ADC Data register. + When the DMA mode is enabled (using the ADC_DMACmd() function), after each + conversion of a channel, a DMA request is generated. + + [..] Depending on the "DMA disable selection" configuration (using the + ADC_DMARequestModeConfig() function), at the end of the last DMA + transfer, two possibilities are allowed: + (+) No new DMA request is issued to the DMA controller (One Shot Mode) + (+) Requests can continue to be generated (Circular Mode). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CFGR1 |= (uint32_t)ADC_CFGR1_DMAEN; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CFGR1 &= (uint32_t)(~ADC_CFGR1_DMAEN); + } +} + +/** + * @brief Enables or disables the ADC DMA request after last transfer (Single-ADC mode) + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_DMARequestMode: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_DMAMode_OneShot: DMA One Shot Mode + * @arg ADC_DMAMode_Circular: DMA Circular Mode + * @retval None + */ +void ADC_DMARequestModeConfig(ADC_TypeDef* ADCx, uint32_t ADC_DMARequestMode) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + ADCx->CFGR1 &= (uint32_t)~ADC_CFGR1_DMACFG; + ADCx->CFGR1 |= (uint32_t)ADC_DMARequestMode; +} + +/** + * @} + */ + +/** @defgroup ADC_Group7 Interrupts and flags management functions + * @brief Interrupts and flags management functions. + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the ADC Interrupts + and get the status and clear flags and Interrupts pending bits. + + [..] The ADC provide 6 Interrupts sources and 11 Flags which can be divided into + 3 groups: + + *** Flags for ADC status *** + ====================================================== + [..] + (+)Flags : + (##) ADC_FLAG_ADRDY : This flag is set after the ADC has been enabled (bit ADEN=1) + and when the ADC reaches a state where it is ready to accept conversion requests + (##) ADC_FLAG_ADEN : This flag is set by software to enable the ADC. + The ADC will be effectively ready to operate once the ADRDY flag has been set. + (##) ADC_FLAG_ADDIS : This flag is cleared once the ADC is effectively + disabled. + (##) ADC_FLAG_ADSTART : This flag is cleared after the execution of + ADC_StopOfConversion() function, at the same time as the ADSTP bit is + cleared by hardware + (##) ADC_FLAG_ADSTP : This flag is cleared by hardware when the conversion + is effectively discarded and the ADC is ready to accept a new start conversion + (##) ADC_FLAG_ADCAL : This flag is set once the calibration is complete. + + (+)Interrupts + (##) ADC_IT_ADRDY : specifies the interrupt source for ADC ready event. + + *** Flags and Interrupts for ADC channel conversion *** + ===================================================== + [..] + (+)Flags : + (##) ADC_FLAG_EOC : This flag is set by hardware at the end of each conversion + of a channel when a new data result is available in the data register + (##) ADC_FLAG_EOSEQ : This bit is set by hardware at the end of the conversion + of a sequence of channels selected by ADC_ChannelConfig() function. + (##) ADC_FLAG_EOSMP : This bit is set by hardware at the end of the sampling phase. + (##) ADC_FLAG_OVR : This flag is set by hardware when an overrun occurs, + meaning that a new conversion has complete while the EOC flag was already set. + + (+)Interrupts : + (##) ADC_IT_EOC : specifies the interrupt source for end of conversion event. + (##) ADC_IT_EOSEQ : specifies the interrupt source for end of sequence event. + (##) ADC_IT_EOSMP : specifies the interrupt source for end of sampling event. + (##) ADC_IT_OVR : specifies the interrupt source for Overrun detection + event. + + *** Flags and Interrupts for the Analog Watchdog *** + ================================================ + [..] + (+)Flags : + (##) ADC_FLAG_AWD: This flag is set by hardware when the converted + voltage crosses the values programmed thrsholds + + (+)Interrupts : + (##) ADC_IT_AWD : specifies the interrupt source for Analog watchdog + event. + + [..] The user should identify which mode will be used in his application to + manage the ADC controller events: Polling mode or Interrupt mode. + + [..] In the Polling Mode it is advised to use the following functions: + (+) ADC_GetFlagStatus() : to check if flags events occur. + (+) ADC_ClearFlag() : to clear the flags events. + + [..] In the Interrupt Mode it is advised to use the following functions: + (+) ADC_ITConfig() : to enable or disable the interrupt source. + (+) ADC_GetITStatus() : to check if Interrupt occurs. + (+) ADC_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg ADC_IT_ADRDY: ADC ready interrupt + * @arg ADC_IT_EOSMP: End of sampling interrupt + * @arg ADC_IT_EOC: End of conversion interrupt + * @arg ADC_IT_EOSEQ: End of sequence of conversion interrupt + * @arg ADC_IT_OVR: overrun interrupt + * @arg ADC_IT_AWD: Analog watchdog interrupt + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint32_t ADC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_CONFIG_IT(ADC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->IER |= ADC_IT; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->IER &= (~(uint32_t)ADC_IT); + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_OVR: Overrun flag + * @arg ADC_FLAG_EOSEQ: End of Sequence flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_EOSMP: End of sampling flag + * @arg ADC_FLAG_ADRDY: ADC Ready flag + * @arg ADC_FLAG_ADEN: ADC enable flag + * @arg ADC_FLAG_ADDIS: ADC disable flag + * @arg ADC_FLAG_ADSTART: ADC start flag + * @arg ADC_FLAG_ADSTP: ADC stop flag + * @arg ADC_FLAG_ADCAL: ADC Calibration flag + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint32_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + + if((uint32_t)(ADC_FLAG & 0x01000000)) + { + tmpreg = ADCx->CR & 0xFEFFFFFF; + } + else + { + tmpreg = ADCx->ISR; + } + + /* Check the status of the specified ADC flag */ + if ((tmpreg & ADC_FLAG) != (uint32_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_ADRDY: ADC Ready flag + * @arg ADC_FLAG_EOSMP: End of sampling flag + * @arg ADC_FLAG_EOSEQ: End of Sequence flag + * @arg ADC_FLAG_OVR: Overrun flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint32_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + + /* Clear the selected ADC flags */ + ADCx->ISR = (uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1 to select the ADC1 peripheral + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_ADRDY: ADC ready interrupt + * @arg ADC_IT_EOSMP: End of sampling interrupt + * @arg ADC_IT_EOC: End of conversion interrupt + * @arg ADC_IT_EOSEQ: End of sequence of conversion interrupt + * @arg ADC_IT_OVR: overrun interrupt + * @arg ADC_IT_AWD: Analog watchdog interrupt + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint32_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_IT(ADC_IT)); + + /* Get the ADC_IT enable bit status */ + enablestatus = (uint32_t)(ADCx->IER & ADC_IT); + + /* Check the status of the specified ADC interrupt */ + if (((uint32_t)(ADCx->ISR & ADC_IT) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1 to select the ADC1 peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg ADC_IT_ADRDY: ADC ready interrupt + * @arg ADC_IT_EOSMP: End of sampling interrupt + * @arg ADC_IT_EOC: End of conversion interrupt + * @arg ADC_IT_EOSEQ: End of sequence of conversion interrupt + * @arg ADC_IT_OVR: overrun interrupt + * @arg ADC_IT_AWD: Analog watchdog interrupt + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint32_t ADC_IT) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_IT(ADC_IT)); + + /* Clear the selected ADC interrupt pending bits */ + ADCx->ISR = (uint32_t)ADC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_can.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_can.c new file mode 100644 index 0000000..5123bac --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_can.c @@ -0,0 +1,1626 @@ +/** + ****************************************************************************** + * @file stm32f0xx_can.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Controller area network (CAN) peripheral and + * applicable only for STM32F072 devices : + * + Initialization and Configuration + * + CAN Frames Transmission + * + CAN Frames Reception + * + Operation modes switch + * + Error management + * + Interrupts and flags + * + @verbatim + + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (#) Enable the CAN controller interface clock using + RCC_APB1PeriphClockCmd(RCC_APB1Periph_CAN, ENABLE); + (#) CAN pins configuration: + (++) Enable the clock for the CAN GPIOs using the following function: + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOx, ENABLE); + (++) Connect the involved CAN pins to AF0 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_CANx); + (++) Configure these CAN pins in alternate function mode by calling + the function GPIO_Init(); + (#) Initialise and configure the CAN using CAN_Init() and + CAN_FilterInit() functions. + (#) Transmit the desired CAN frame using CAN_Transmit() function. + (#) Check the transmission of a CAN frame using CAN_TransmitStatus() function. + (#) Cancel the transmission of a CAN frame using CAN_CancelTransmit() function. + (#) Receive a CAN frame using CAN_Recieve() function. + (#) Release the receive FIFOs using CAN_FIFORelease() function. + (#) Return the number of pending received frames using CAN_MessagePending() function. + (#) To control CAN events you can use one of the following two methods: + (++) Check on CAN flags using the CAN_GetFlagStatus() function. + (++) Use CAN interrupts through the function CAN_ITConfig() at initialization + phase and CAN_GetITStatus() function into interrupt routines to check + if the event has occurred or not. + After checking on a flag you should clear it using CAN_ClearFlag() + function. And after checking on an interrupt event you should clear it + using CAN_ClearITPendingBit() function. + + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_can.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CAN + * @brief CAN driver modules + * @{ + */ +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* CAN Master Control Register bits */ +#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ + +/* CAN Mailbox Transmit Request */ +#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ + +/* CAN Filter Master Register bits */ +#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ + +/* Time out for INAK bit */ +#define INAK_TIMEOUT ((uint32_t)0x00FFFFFF) +/* Time out for SLAK bit */ +#define SLAK_TIMEOUT ((uint32_t)0x00FFFFFF) + +/* Flags in TSR register */ +#define CAN_FLAGS_TSR ((uint32_t)0x08000000) +/* Flags in RF1R register */ +#define CAN_FLAGS_RF1R ((uint32_t)0x04000000) +/* Flags in RF0R register */ +#define CAN_FLAGS_RF0R ((uint32_t)0x02000000) +/* Flags in MSR register */ +#define CAN_FLAGS_MSR ((uint32_t)0x01000000) +/* Flags in ESR register */ +#define CAN_FLAGS_ESR ((uint32_t)0x00F00000) + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) + +#define CAN_MODE_MASK ((uint32_t) 0x00000003) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); + +/** @defgroup CAN_Private_Functions + * @{ + */ + +/** @defgroup CAN_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CAN peripherals : Prescaler, operating mode, the maximum + number of time quanta to perform resynchronization, the number of time + quanta in Bit Segment 1 and 2 and many other modes. + (+) Configure the CAN reception filter. + (+) Select the start bank filter for slave CAN. + (+) Enable or disable the Debug Freeze mode for CAN. + (+) Enable or disable the CAN Time Trigger Operation communication mode. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the CAN peripheral registers to their default reset values. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @retval None. + */ +void CAN_DeInit(CAN_TypeDef* CANx) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(CANx); + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Enable CAN reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN, ENABLE); + /* Release CAN from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN, DISABLE); +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that contains + * the configuration information for the CAN peripheral. + * @retval Constant indicates initialization succeed which will be + * CAN_InitStatus_Failed or CAN_InitStatus_Success. + */ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) +{ + uint8_t InitStatus = CAN_InitStatus_Failed; + uint32_t wait_ack = 0x00000000; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); + assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); + assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); + assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); + assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); + assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); + + /* Exit from sleep mode */ + CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP); + + /* Request initialisation */ + CANx->MCR |= CAN_MCR_INRQ ; + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* Check acknowledge */ + if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + /* Set the time triggered communication mode */ + if (CAN_InitStruct->CAN_TTCM == ENABLE) + { + CANx->MCR |= CAN_MCR_TTCM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM; + } + + /* Set the automatic bus-off management */ + if (CAN_InitStruct->CAN_ABOM == ENABLE) + { + CANx->MCR |= CAN_MCR_ABOM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM; + } + + /* Set the automatic wake-up mode */ + if (CAN_InitStruct->CAN_AWUM == ENABLE) + { + CANx->MCR |= CAN_MCR_AWUM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM; + } + + /* Set the no automatic retransmission */ + if (CAN_InitStruct->CAN_NART == ENABLE) + { + CANx->MCR |= CAN_MCR_NART; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_NART; + } + + /* Set the receive FIFO locked mode */ + if (CAN_InitStruct->CAN_RFLM == ENABLE) + { + CANx->MCR |= CAN_MCR_RFLM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM; + } + + /* Set the transmit FIFO priority */ + if (CAN_InitStruct->CAN_TXFP == ENABLE) + { + CANx->MCR |= CAN_MCR_TXFP; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP; + } + + /* Set the bit timing register */ + CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ + ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ + ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ + ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ + ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); + + /* Request leave initialisation */ + CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ; + + /* Wait the acknowledge */ + wait_ack = 0; + + while (((CANx->MSR & CAN_MSR_INAK) == (uint16_t)CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* ...and check acknowledged */ + if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + InitStatus = CAN_InitStatus_Success ; + } + } + + /* At this step, return the status of initialization */ + return InitStatus; +} + +/** + * @brief Configures the CAN reception filter according to the specified + * parameters in the CAN_FilterInitStruct. + * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef structure that + * contains the configuration information. + * @retval None + */ +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) +{ + uint32_t filter_number_bit_pos = 0; + /* Check the parameters */ + assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); + assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); + assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); + assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); + assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); + + filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; + + /* Initialisation mode for the filter */ + CAN->FMR |= FMR_FINIT; + + /* Filter Deactivation */ + CAN->FA1R &= ~(uint32_t)filter_number_bit_pos; + + /* Filter Scale */ + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) + { + /* 16-bit scale for the filter */ + CAN->FS1R &= ~(uint32_t)filter_number_bit_pos; + + /* First 16-bit identifier and First 16-bit mask */ + /* Or First 16-bit identifier and Second 16-bit identifier */ + CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + /* Second 16-bit identifier and Second 16-bit mask */ + /* Or Third 16-bit identifier and Fourth 16-bit identifier */ + CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); + } + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) + { + /* 32-bit scale for the filter */ + CAN->FS1R |= filter_number_bit_pos; + /* 32-bit identifier or First 32-bit identifier */ + CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + /* 32-bit mask or Second 32-bit identifier */ + CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); + } + + /* Filter Mode */ + if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) + { + /*Id/Mask mode for the filter*/ + CAN->FM1R &= ~(uint32_t)filter_number_bit_pos; + } + else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ + { + /*Identifier list mode for the filter*/ + CAN->FM1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter FIFO assignment */ + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) + { + /* FIFO 0 assignation for the filter */ + CAN->FFA1R &= ~(uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) + { + /* FIFO 1 assignation for the filter */ + CAN->FFA1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter activation */ + if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) + { + CAN->FA1R |= filter_number_bit_pos; + } + + /* Leave the initialisation mode for the filter */ + CAN->FMR &= ~FMR_FINIT; +} + +/** + * @brief Fills each CAN_InitStruct member with its default value. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which ill be initialized. + * @retval None + */ +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) +{ + /* Reset CAN init structure parameters values */ + + /* Initialize the time triggered communication mode */ + CAN_InitStruct->CAN_TTCM = DISABLE; + + /* Initialize the automatic bus-off management */ + CAN_InitStruct->CAN_ABOM = DISABLE; + + /* Initialize the automatic wake-up mode */ + CAN_InitStruct->CAN_AWUM = DISABLE; + + /* Initialize the no automatic retransmission */ + CAN_InitStruct->CAN_NART = DISABLE; + + /* Initialize the receive FIFO locked mode */ + CAN_InitStruct->CAN_RFLM = DISABLE; + + /* Initialize the transmit FIFO priority */ + CAN_InitStruct->CAN_TXFP = DISABLE; + + /* Initialize the CAN_Mode member */ + CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; + + /* Initialize the CAN_SJW member */ + CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; + + /* Initialize the CAN_BS1 member */ + CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; + + /* Initialize the CAN_BS2 member */ + CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; + + /* Initialize the CAN_Prescaler member */ + CAN_InitStruct->CAN_Prescaler = 1; +} + +/** + * @brief Select the start bank filter for slave CAN. + * @param CAN_BankNumber: Select the start slave bank filter from 1..27. + * @retval None + */ +void CAN_SlaveStartBank(uint8_t CAN_BankNumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); + + /* Enter Initialisation mode for the filter */ + CAN->FMR |= FMR_FINIT; + + /* Select the start slave bank */ + CAN->FMR &= (uint32_t)0xFFFFC0F1 ; + CAN->FMR |= (uint32_t)(CAN_BankNumber)<<8; + + /* Leave Initialisation mode for the filter */ + CAN->FMR &= ~FMR_FINIT; +} + +/** + * @brief Enables or disables the DBG Freeze for CAN. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: new state of the CAN peripheral. + * This parameter can be: ENABLE (CAN reception/transmission is frozen + * during debug. Reception FIFOs can still be accessed/controlled normally) + * or DISABLE (CAN is working during debug). + * @retval None + */ +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Debug Freeze */ + CANx->MCR |= MCR_DBF; + } + else + { + /* Disable Debug Freeze */ + CANx->MCR &= ~MCR_DBF; + } +} + +/** + * @brief Enables or disables the CAN Time TriggerOperation communication mode. + * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be + * sent over the CAN bus. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: Mode new state. This parameter can be: ENABLE or DISABLE. + * When enabled, Time stamp (TIME[15:0]) value is sent in the last two + * data bytes of the 8-byte message: TIME[7:0] in data byte 6 and TIME[15:8] + * in data byte 7. + * @retval None + */ +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TTCM mode */ + CANx->MCR |= CAN_MCR_TTCM; + + /* Set TGT bits */ + CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT); + } + else + { + /* Disable the TTCM mode */ + CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM); + + /* Reset TGT bits */ + CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT); + } +} +/** + * @} + */ + + +/** @defgroup CAN_Group2 CAN Frames Transmission functions + * @brief CAN Frames Transmission functions + * +@verbatim + =============================================================================== + ##### CAN Frames Transmission functions ##### + =============================================================================== + [..] This section provides functions allowing to + (+) Initiate and transmit a CAN frame message (if there is an empty mailbox). + (+) Check the transmission status of a CAN Frame. + (+) Cancel a transmit request. + +@endverbatim + * @{ + */ + +/** + * @brief Initiates and transmits a CAN frame message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param TxMessage: pointer to a structure which contains CAN Id, CAN DLC and CAN data. + * @retval The number of the mailbox that is used for transmission or + * CAN_TxStatus_NoMailBox if there is no empty mailbox. + */ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) +{ + uint8_t transmit_mailbox = 0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); + assert_param(IS_CAN_RTR(TxMessage->RTR)); + assert_param(IS_CAN_DLC(TxMessage->DLC)); + + /* Select one empty transmit mailbox */ + if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmit_mailbox = 0; + } + else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmit_mailbox = 1; + } + else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) + { + transmit_mailbox = 2; + } + else + { + transmit_mailbox = CAN_TxStatus_NoMailBox; + } + + if (transmit_mailbox != CAN_TxStatus_NoMailBox) + { + /* Set up the Id */ + CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; + if (TxMessage->IDE == CAN_Id_Standard) + { + assert_param(IS_CAN_STDID(TxMessage->StdId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \ + TxMessage->RTR); + } + else + { + assert_param(IS_CAN_EXTID(TxMessage->ExtId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \ + TxMessage->IDE | \ + TxMessage->RTR); + } + + /* Set up the DLC */ + TxMessage->DLC &= (uint8_t)0x0000000F; + CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; + CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; + + /* Set up the data field */ + CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | + ((uint32_t)TxMessage->Data[2] << 16) | + ((uint32_t)TxMessage->Data[1] << 8) | + ((uint32_t)TxMessage->Data[0])); + CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | + ((uint32_t)TxMessage->Data[6] << 16) | + ((uint32_t)TxMessage->Data[5] << 8) | + ((uint32_t)TxMessage->Data[4])); + /* Request transmission */ + CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; + } + return transmit_mailbox; +} + +/** + * @brief Checks the transmission status of a CAN Frame. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @param TransmitMailbox: the number of the mailbox that is used for transmission. + * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, + * CAN_TxStatus_Failed in an other case. + */ +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) +{ + uint32_t state = 0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); + + switch (TransmitMailbox) + { + case (CAN_TXMAILBOX_0): + state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0); + break; + case (CAN_TXMAILBOX_1): + state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1); + break; + case (CAN_TXMAILBOX_2): + state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2); + break; + default: + state = CAN_TxStatus_Failed; + break; + } + switch (state) + { + /* transmit pending */ + case (0x0): state = CAN_TxStatus_Pending; + break; + /* transmit failed */ + case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed; + break; + /* transmit succeeded */ + case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok; + break; + default: state = CAN_TxStatus_Failed; + break; + } + return (uint8_t) state; +} + +/** + * @brief Cancels a transmit request. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @param Mailbox: Mailbox number. + * @retval None + */ +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); + /* abort transmission */ + switch (Mailbox) + { + case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0; + break; + case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1; + break; + case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2; + break; + default: + break; + } +} +/** + * @} + */ + + +/** @defgroup CAN_Group3 CAN Frames Reception functions + * @brief CAN Frames Reception functions + * +@verbatim + =============================================================================== + ##### CAN Frames Reception functions ##### + =============================================================================== + [..] This section provides functions allowing to + (+) Receive a correct CAN frame. + (+) Release a specified receive FIFO (2 FIFOs are available). + (+) Return the number of the pending received CAN frames. + +@endverbatim + * @{ + */ + +/** + * @brief Receives a correct CAN frame. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @param RxMessage: pointer to a structure receive frame which contains CAN Id, + * CAN DLC, CAN data and FMI number. + * @retval None + */ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Get the Id */ + RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; + if (RxMessage->IDE == CAN_Id_Standard) + { + RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); + } + else + { + RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); + } + + RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FMI */ + RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); + /* Get the data field */ + RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; + RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); + RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); + RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); + RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; + RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); + RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); + RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); + /* Release the FIFO */ + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Releases the specified receive FIFO. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. + * @retval None + */ +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Returns the number of pending received messages. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval NbMessage : which is the number of pending message. + */ +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + uint8_t message_pending=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + if (FIFONumber == CAN_FIFO0) + { + message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); + } + else if (FIFONumber == CAN_FIFO1) + { + message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); + } + else + { + message_pending = 0; + } + return message_pending; +} +/** + * @} + */ + + +/** @defgroup CAN_Group4 CAN Operation modes functions + * @brief CAN Operation modes functions + * +@verbatim + =============================================================================== + ##### CAN Operation modes functions ##### + =============================================================================== + [..] This section provides functions allowing to select the CAN Operation modes: + (+) sleep mode. + (+) normal mode. + (+) initialization mode. + +@endverbatim + * @{ + */ + + +/** + * @brief Selects the CAN Operation mode. + * @param CAN_OperatingMode: CAN Operating Mode. + * This parameter can be one of @ref CAN_OperatingMode_TypeDef enumeration. + * @retval status of the requested mode which can be: + * - CAN_ModeStatus_Failed: CAN failed entering the specific mode + * - CAN_ModeStatus_Success: CAN Succeed entering the specific mode + */ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) +{ + uint8_t status = CAN_ModeStatus_Failed; + + /* Timeout for INAK or also for SLAK bits*/ + uint32_t timeout = INAK_TIMEOUT; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode)); + + if (CAN_OperatingMode == CAN_OperatingMode_Initialization) + { + /* Request initialisation */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Normal) + { + /* Request leave initialisation and sleep mode and enter Normal mode */ + CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ)); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != 0) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) + { + /* Request Sleep mode */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else + { + status = CAN_ModeStatus_Failed; + } + + return (uint8_t) status; +} + +/** + * @brief Enters the Sleep (low power) mode. + * @param CANx: where x can be 1 to select the CAN peripheral. + * @retval CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed otherwise. + */ +uint8_t CAN_Sleep(CAN_TypeDef* CANx) +{ + uint8_t sleepstatus = CAN_Sleep_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Request Sleep mode */ + CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Sleep mode status */ + if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) + { + /* Sleep mode not entered */ + sleepstatus = CAN_Sleep_Ok; + } + /* return sleep mode status */ + return (uint8_t)sleepstatus; +} + +/** + * @brief Wakes up the CAN peripheral from sleep mode . + * @param CANx: where x can be 1 to select the CAN peripheral. + * @retval CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed otherwise. + */ +uint8_t CAN_WakeUp(CAN_TypeDef* CANx) +{ + uint32_t wait_slak = SLAK_TIMEOUT; + uint8_t wakeupstatus = CAN_WakeUp_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Wake up request */ + CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP; + + /* Sleep mode status */ + while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) + { + wait_slak--; + } + if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) + { + /* wake up done : Sleep mode exited */ + wakeupstatus = CAN_WakeUp_Ok; + } + /* return wakeup status */ + return (uint8_t)wakeupstatus; +} +/** + * @} + */ + + +/** @defgroup CAN_Group5 CAN Bus Error management functions + * @brief CAN Bus Error management functions + * +@verbatim + =============================================================================== + ##### CAN Bus Error management functions ##### + =============================================================================== + [..] This section provides functions allowing to + (+) Return the CANx's last error code (LEC). + (+) Return the CANx Receive Error Counter (REC). + (+) Return the LSB of the 9-bit CANx Transmit Error Counter(TEC). + [..] + (@) If TEC is greater than 255, The CAN is in bus-off state. + (@) If REC or TEC are greater than 96, an Error warning flag occurs. + (@) If REC or TEC are greater than 127, an Error Passive Flag occurs. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the CANx's last error code (LEC). + * @param CANx: where x can be 1 to select the CAN peripheral. + * @retval Error code: + * - CAN_ERRORCODE_NoErr: No Error + * - CAN_ERRORCODE_StuffErr: Stuff Error + * - CAN_ERRORCODE_FormErr: Form Error + * - CAN_ERRORCODE_ACKErr : Acknowledgment Error + * - CAN_ERRORCODE_BitRecessiveErr: Bit Recessive Error + * - CAN_ERRORCODE_BitDominantErr: Bit Dominant Error + * - CAN_ERRORCODE_CRCErr: CRC Error + * - CAN_ERRORCODE_SoftwareSetErr: Software Set Error + */ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) +{ + uint8_t errorcode=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the error code*/ + errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC); + + /* Return the error code*/ + return errorcode; +} + +/** + * @brief Returns the CANx Receive Error Counter (REC). + * @note In case of an error during reception, this counter is incremented + * by 1 or by 8 depending on the error condition as defined by the CAN + * standard. After every successful reception, the counter is + * decremented by 1 or reset to 120 if its value was higher than 128. + * When the counter value exceeds 127, the CAN controller enters the + * error passive state. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN Receive Error Counter. + */ +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the Receive Error Counter*/ + counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24); + + /* Return the Receive Error Counter*/ + return counter; +} + + +/** + * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval LSB of the 9-bit CAN Transmit Error Counter. + */ +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16); + + /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + return counter; +} +/** + * @} + */ + +/** @defgroup CAN_Group6 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the CAN Interrupts + and to get the status and clear flags and Interrupts pending bits. + [..] The CAN provides 14 Interrupts sources and 15 Flags: + + *** Flags *** + ============= + [..] The 15 flags can be divided on 4 groups: + (+) Transmit Flags: + (++) CAN_FLAG_RQCP0. + (++) CAN_FLAG_RQCP1. + (++) CAN_FLAG_RQCP2: Request completed MailBoxes 0, 1 and 2 Flags + Set when when the last request (transmit or abort) has + been performed. + (+) Receive Flags: + (++) CAN_FLAG_FMP0. + (++) CAN_FLAG_FMP1: FIFO 0 and 1 Message Pending Flags; + Set to signal that messages are pending in the receive FIFO. + These Flags are cleared only by hardware. + (++) CAN_FLAG_FF0. + (++) CAN_FLAG_FF1: FIFO 0 and 1 Full Flags; + Set when three messages are stored in the selected FIFO. + (++) CAN_FLAG_FOV0. + (++) CAN_FLAG_FOV1: FIFO 0 and 1 Overrun Flags; + Set when a new message has been received and passed the filter + while the FIFO was full. + (+) Operating Mode Flags: + (++) CAN_FLAG_WKU: Wake up Flag; + Set to signal that a SOF bit has been detected while the CAN + hardware was in Sleep mode. + (++) CAN_FLAG_SLAK: Sleep acknowledge Flag; + Set to signal that the CAN has entered Sleep Mode. + (+) Error Flags: + (++) CAN_FLAG_EWG: Error Warning Flag; + Set when the warning limit has been reached (Receive Error Counter + or Transmit Error Counter greater than 96). + This Flag is cleared only by hardware. + (++) CAN_FLAG_EPV: Error Passive Flag; + Set when the Error Passive limit has been reached (Receive Error + Counter or Transmit Error Counter greater than 127). + This Flag is cleared only by hardware. + (++) CAN_FLAG_BOF: Bus-Off Flag; + Set when CAN enters the bus-off state. The bus-off state is + entered on TEC overflow, greater than 255. + This Flag is cleared only by hardware. + (++) CAN_FLAG_LEC: Last error code Flag; + Set If a message has been transferred (reception or transmission) + with error, and the error code is hold. + + *** Interrupts *** + ================== + [..] The 14 interrupts can be divided on 4 groups: + (+) Transmit interrupt: + (++) CAN_IT_TME: Transmit mailbox empty Interrupt; + If enabled, this interrupt source is pending when no transmit + request are pending for Tx mailboxes. + (+) Receive Interrupts: + (++) CAN_IT_FMP0. + (++) CAN_IT_FMP1: FIFO 0 and FIFO1 message pending Interrupts; + If enabled, these interrupt sources are pending when messages + are pending in the receive FIFO. + The corresponding interrupt pending bits are cleared only by hardware. + (++) CAN_IT_FF0. + (++) CAN_IT_FF1: FIFO 0 and FIFO1 full Interrupts; + If enabled, these interrupt sources are pending when three messages + are stored in the selected FIFO. + (++) CAN_IT_FOV0. + (++) CAN_IT_FOV1: FIFO 0 and FIFO1 overrun Interrupts; + If enabled, these interrupt sources are pending when a new message + has been received and passed the filter while the FIFO was full. + (+) Operating Mode Interrupts: + (++) CAN_IT_WKU: Wake-up Interrupt; + If enabled, this interrupt source is pending when a SOF bit has + been detected while the CAN hardware was in Sleep mode. + (++) CAN_IT_SLK: Sleep acknowledge Interrupt: + If enabled, this interrupt source is pending when the CAN has + entered Sleep Mode. + (+) Error Interrupts: + (++) CAN_IT_EWG: Error warning Interrupt; + If enabled, this interrupt source is pending when the warning limit + has been reached (Receive Error Counter or Transmit Error Counter=96). + (++) CAN_IT_EPV: Error passive Interrupt; + If enabled, this interrupt source is pending when the Error Passive + limit has been reached (Receive Error Counter or Transmit Error Counter>127). + (++) CAN_IT_BOF: Bus-off Interrupt; + If enabled, this interrupt source is pending when CAN enters + the bus-off state. The bus-off state is entered on TEC overflow, + greater than 255. + This Flag is cleared only by hardware. + (++) CAN_IT_LEC: Last error code Interrupt; + If enabled, this interrupt source is pending when a message has + been transferred (reception or transmission) with error and the + error code is hold. + (++) CAN_IT_ERR: Error Interrupt; + If enabled, this interrupt source is pending when an error condition + is pending. + [..] Managing the CAN controller events: + The user should identify which mode will be used in his application to manage + the CAN controller events: Polling mode or Interrupt mode. + (+) In the Polling Mode it is advised to use the following functions: + (++) CAN_GetFlagStatus() : to check if flags events occur. + (++) CAN_ClearFlag() : to clear the flags events. + (+) In the Interrupt Mode it is advised to use the following functions: + (++) CAN_ITConfig() : to enable or disable the interrupt source. + (++) CAN_GetITStatus() : to check if Interrupt occurs. + (++) CAN_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). + This function has no impact on CAN_IT_FMP0 and CAN_IT_FMP1 Interrupts + pending bits since there are cleared only by hardware. + +@endverbatim + * @{ + */ +/** + * @brief Enables or disables the specified CANx interrupts. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg CAN_IT_TME: Transmit mailbox empty Interrupt + * @arg CAN_IT_FMP0: FIFO 0 message pending Interrupt + * @arg CAN_IT_FF0: FIFO 0 full Interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun Interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending Interrupt + * @arg CAN_IT_FF1: FIFO 1 full Interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun Interrupt + * @arg CAN_IT_WKU: Wake-up Interrupt + * @arg CAN_IT_SLK: Sleep acknowledge Interrupt + * @arg CAN_IT_EWG: Error warning Interrupt + * @arg CAN_IT_EPV: Error passive Interrupt + * @arg CAN_IT_BOF: Bus-off Interrupt + * @arg CAN_IT_LEC: Last error code Interrupt + * @arg CAN_IT_ERR: Error Interrupt + * @param NewState: new state of the CAN interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CANx interrupt */ + CANx->IER |= CAN_IT; + } + else + { + /* Disable the selected CANx interrupt */ + CANx->IER &= ~CAN_IT; + } +} +/** + * @brief Checks whether the specified CAN flag is set or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CAN_FLAG_RQCP0: Request MailBox0 Flag + * @arg CAN_FLAG_RQCP1: Request MailBox1 Flag + * @arg CAN_FLAG_RQCP2: Request MailBox2 Flag + * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag + * @arg CAN_FLAG_FF0: FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag + * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag + * @arg CAN_FLAG_FF1: FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKU: Wake up Flag + * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag + * @arg CAN_FLAG_EWG: Error Warning Flag + * @arg CAN_FLAG_EPV: Error Passive Flag + * @arg CAN_FLAG_BOF: Bus-Off Flag + * @arg CAN_FLAG_LEC: Last error code Flag + * @retval The new state of CAN_FLAG (SET or RESET). + */ +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_GET_FLAG(CAN_FLAG)); + + + if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */ + { + /* Check the status of the specified CAN flag */ + if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + /* Return the CAN_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CAN's pending flags. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg CAN_FLAG_RQCP0: Request MailBox0 Flag + * @arg CAN_FLAG_RQCP1: Request MailBox1 Flag + * @arg CAN_FLAG_RQCP2: Request MailBox2 Flag + * @arg CAN_FLAG_FF0: FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag + * @arg CAN_FLAG_FF1: FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKU: Wake up Flag + * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag + * @arg CAN_FLAG_LEC: Last error code Flag + * @retval None + */ +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + uint32_t flagtmp=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG)); + + if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */ + { + /* Clear the selected CAN flags */ + CANx->ESR = (uint32_t)RESET; + } + else /* MSR or TSR or RF0R or RF1R */ + { + flagtmp = CAN_FLAG & 0x000FFFFF; + + if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF0R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF1R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET) + { + /* Transmit Flags */ + CANx->TSR = (uint32_t)(flagtmp); + } + else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */ + { + /* Operating mode Flags */ + CANx->MSR = (uint32_t)(flagtmp); + } + } +} + +/** + * @brief Checks whether the specified CANx interrupt has occurred or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt source to check. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty Interrupt + * @arg CAN_IT_FMP0: FIFO 0 message pending Interrupt + * @arg CAN_IT_FF0: FIFO 0 full Interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun Interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending Interrupt + * @arg CAN_IT_FF1: FIFO 1 full Interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun Interrupt + * @arg CAN_IT_WKU: Wake-up Interrupt + * @arg CAN_IT_SLK: Sleep acknowledge Interrupt + * @arg CAN_IT_EWG: Error warning Interrupt + * @arg CAN_IT_EPV: Error passive Interrupt + * @arg CAN_IT_BOF: Bus-off Interrupt + * @arg CAN_IT_LEC: Last error code Interrupt + * @arg CAN_IT_ERR: Error Interrupt + * @retval The current state of CAN_IT (SET or RESET). + */ +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + ITStatus itstatus = RESET; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + + /* check the interrupt enable bit */ + if((CANx->IER & CAN_IT) != RESET) + { + /* in case the Interrupt is enabled, .... */ + switch (CAN_IT) + { + case CAN_IT_TME: + /* Check CAN_TSR_RQCPx bits */ + itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2); + break; + case CAN_IT_FMP0: + /* Check CAN_RF0R_FMP0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0); + break; + case CAN_IT_FF0: + /* Check CAN_RF0R_FULL0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0); + break; + case CAN_IT_FOV0: + /* Check CAN_RF0R_FOVR0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0); + break; + case CAN_IT_FMP1: + /* Check CAN_RF1R_FMP1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1); + break; + case CAN_IT_FF1: + /* Check CAN_RF1R_FULL1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1); + break; + case CAN_IT_FOV1: + /* Check CAN_RF1R_FOVR1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1); + break; + case CAN_IT_WKU: + /* Check CAN_MSR_WKUI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI); + break; + case CAN_IT_SLK: + /* Check CAN_MSR_SLAKI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI); + break; + case CAN_IT_EWG: + /* Check CAN_ESR_EWGF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF); + break; + case CAN_IT_EPV: + /* Check CAN_ESR_EPVF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF); + break; + case CAN_IT_BOF: + /* Check CAN_ESR_BOFF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF); + break; + case CAN_IT_LEC: + /* Check CAN_ESR_LEC bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC); + break; + case CAN_IT_ERR: + /* Check CAN_MSR_ERRI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); + break; + default: + /* in case of error, return RESET */ + itstatus = RESET; + break; + } + } + else + { + /* in case the Interrupt is not enabled, return RESET */ + itstatus = RESET; + } + + /* Return the CAN_IT status */ + return itstatus; +} + +/** + * @brief Clears the CANx's interrupt pending bits. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty Interrupt + * @arg CAN_IT_FF0: FIFO 0 full Interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun Interrupt + * @arg CAN_IT_FF1: FIFO 1 full Interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun Interrupt + * @arg CAN_IT_WKU: Wake-up Interrupt + * @arg CAN_IT_SLK: Sleep acknowledge Interrupt + * @arg CAN_IT_EWG: Error warning Interrupt + * @arg CAN_IT_EPV: Error passive Interrupt + * @arg CAN_IT_BOF: Bus-off Interrupt + * @arg CAN_IT_LEC: Last error code Interrupt + * @arg CAN_IT_ERR: Error Interrupt + * @retval None + */ +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_IT(CAN_IT)); + + switch (CAN_IT) + { + case CAN_IT_TME: + /* Clear CAN_TSR_RQCPx (rc_w1)*/ + CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2; + break; + case CAN_IT_FF0: + /* Clear CAN_RF0R_FULL0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FULL0; + break; + case CAN_IT_FOV0: + /* Clear CAN_RF0R_FOVR0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FOVR0; + break; + case CAN_IT_FF1: + /* Clear CAN_RF1R_FULL1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FULL1; + break; + case CAN_IT_FOV1: + /* Clear CAN_RF1R_FOVR1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FOVR1; + break; + case CAN_IT_WKU: + /* Clear CAN_MSR_WKUI (rc_w1)*/ + CANx->MSR = CAN_MSR_WKUI; + break; + case CAN_IT_SLK: + /* Clear CAN_MSR_SLAKI (rc_w1)*/ + CANx->MSR = CAN_MSR_SLAKI; + break; + case CAN_IT_EWG: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note the corresponding Flag is cleared by hardware depending on the CAN Bus status*/ + break; + case CAN_IT_EPV: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note the corresponding Flag is cleared by hardware depending on the CAN Bus status*/ + break; + case CAN_IT_BOF: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note the corresponding Flag is cleared by hardware depending on the CAN Bus status*/ + break; + case CAN_IT_LEC: + /* Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + break; + case CAN_IT_ERR: + /*Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note BOFF, EPVF and EWGF Flags are cleared by hardware depending on the CAN Bus status*/ + break; + default: + break; + } +} + /** + * @} + */ + +/** + * @brief Checks whether the CAN interrupt has occurred or not. + * @param CAN_Reg: specifies the CAN interrupt register to check. + * @param It_Bit: specifies the interrupt source bit to check. + * @retval The new state of the CAN Interrupt (SET or RESET). + */ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) +{ + ITStatus pendingbitstatus = RESET; + + if ((CAN_Reg & It_Bit) != (uint32_t)RESET) + { + /* CAN_IT is set */ + pendingbitstatus = SET; + } + else + { + /* CAN_IT is reset */ + pendingbitstatus = RESET; + } + return pendingbitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_cec.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_cec.c new file mode 100644 index 0000000..899bab1 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_cec.c @@ -0,0 +1,599 @@ +/** + ****************************************************************************** + * @file stm32f0xx_cec.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Consumer Electronics Control (CEC) peripheral + * applicable only on STM32F051, STM32F042 and STM32F072 devices: + * + Initialization and Configuration + * + Data transfers functions + * + Interrupts and flags management + * + * @verbatim + ============================================================================== + ##### CEC features ##### + ============================================================================== + [..] This device provides some features: + (#) Supports HDMI-CEC specification 1.4. + (#) Supports two source clocks(HSI/244 or LSE). + (#) Works in stop mode(without APB clock, but with CEC clock 32KHz). + It can genarate an interrupt in the CEC clock domain that the CPU + wakes up from the low power mode. + (#) Configurable Signal Free Time before of transmission start. The + number of nominal data bit periods waited before transmission can be + ruled by Hardware or Software. + (#) Configurable Peripheral Address (multi-addressing configuration). + (#) Supports listen mode.The CEC Messages addressed to different destination + can be received without interfering with CEC bus when Listen mode option is enabled. + (#) Configurable Rx-Tolerance(Standard and Extended tolerance margin). + (#) Error detection with configurable error bit generation. + (#) Arbitration lost error in the case of two CEC devices starting at the same time. + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the CEC device, + follow steps below: + (#) The source clock can be configured using: + (++) RCC_CECCLKConfig(RCC_CECCLK_HSI_Div244) for HSI(Default) + (++) RCC_CECCLKConfig(RCC_CECCLK_LSE) for LSE. + (#) Enable CEC peripheral clock using RCC_APBPeriphClockCmd(RCC_APBPeriph_CEC, ENABLE). + (#) Peripherals alternate function. + (++) Connect the pin to the desired peripherals' Alternate Function (AF) using + GPIO_PinAFConfig() function. + (++) Configure the desired pin in alternate function by: + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF. + (++) Select the type open-drain and output speed via GPIO_OType + and GPIO_Speed members. + (++) Call GPIO_Init() function. + (#) Configure the Signal Free Time, Rx Tolerance, Stop reception generation + and Bit error generation using the CEC_Init() function. + The function CEC_Init() must be called when the CEC peripheral is disabled. + (#) Configure the CEC own address by calling the fuction CEC_OwnAddressConfig(). + (#) Optionally, you can configure the Listen mode using the function CEC_ListenModeCmd(). + (#) Enable the NVIC and the corresponding interrupt using the function + CEC_ITConfig() if you need to use interrupt mode. + CEC_ITConfig() must be called before enabling the CEC peripheral. + (#) Enable the CEC using the CEC_Cmd() function. + (#) Charge the first data byte in the TXDR register using CEC_SendDataByte(). + (#) Enable the transmission of the Byte of a CEC message using CEC_StartOfMessage() + (#) Transmit single data through the CEC peripheral using CEC_SendDataByte() + and Receive the last transmitted byte using CEC_ReceiveDataByte(). + (#) Enable the CEC_EndOfMessage() in order to indicate the last byte of the message. + [..] + (@) If the listen mode is enabled, Stop reception generation and Bit error generation + must be in reset state. + (@) If the CEC message consists of only 1 byte, the function CEC_EndOfMessage() + must be called before CEC_StartOfMessage(). + + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_cec.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CEC + * @brief CEC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define BROADCAST_ADDRESS ((uint32_t)0x0000F) +#define CFGR_CLEAR_MASK ((uint32_t)0x7000FE00) /* CFGR register Mask */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CEC_Private_Functions + * @{ + */ + +/** @defgroup CEC_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize: + (+) CEC own addresses + (+) CEC Signal Free Time + (+) CEC Rx Tolerance + (+) CEC Stop Reception + (+) CEC Bit Rising Error + (+) CEC Long Bit Period Error + [..] This section provides also a function to configure the CEC peripheral in Listen Mode. + Messages addressed to different destination can be received when Listen mode is + enabled without interfering with CEC bus. +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the CEC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void CEC_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE); +} + +/** + * @brief Initializes the CEC peripheral according to the specified parameters + * in the CEC_InitStruct. + * @note The CEC parameters must be configured before enabling the CEC peripheral. + * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that contains + * the configuration information for the specified CEC peripheral. + * @retval None + */ +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_CEC_SIGNAL_FREE_TIME(CEC_InitStruct->CEC_SignalFreeTime)); + assert_param(IS_CEC_RX_TOLERANCE(CEC_InitStruct->CEC_RxTolerance)); + assert_param(IS_CEC_STOP_RECEPTION(CEC_InitStruct->CEC_StopReception)); + assert_param(IS_CEC_BIT_RISING_ERROR(CEC_InitStruct->CEC_BitRisingError)); + assert_param(IS_CEC_LONG_BIT_PERIOD_ERROR(CEC_InitStruct->CEC_LongBitPeriodError)); + assert_param(IS_CEC_BDR_NO_GEN_ERROR(CEC_InitStruct->CEC_BRDNoGen)); + assert_param(IS_CEC_SFT_OPTION(CEC_InitStruct->CEC_SFTOption)); + + /* Get the CEC CFGR value */ + tmpreg = CEC->CFGR; + + /* Clear CFGR bits */ + tmpreg &= CFGR_CLEAR_MASK; + + /* Configure the CEC peripheral */ + tmpreg |= (CEC_InitStruct->CEC_SignalFreeTime | CEC_InitStruct->CEC_RxTolerance | + CEC_InitStruct->CEC_StopReception | CEC_InitStruct->CEC_BitRisingError | + CEC_InitStruct->CEC_LongBitPeriodError| CEC_InitStruct->CEC_BRDNoGen | + CEC_InitStruct->CEC_SFTOption); + + /* Write to CEC CFGR register */ + CEC->CFGR = tmpreg; +} + +/** + * @brief Fills each CEC_InitStruct member with its default value. + * @param CEC_InitStruct: pointer to a CEC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void CEC_StructInit(CEC_InitTypeDef* CEC_InitStruct) +{ + CEC_InitStruct->CEC_SignalFreeTime = CEC_SignalFreeTime_Standard; + CEC_InitStruct->CEC_RxTolerance = CEC_RxTolerance_Standard; + CEC_InitStruct->CEC_StopReception = CEC_StopReception_Off; + CEC_InitStruct->CEC_BitRisingError = CEC_BitRisingError_Off; + CEC_InitStruct->CEC_LongBitPeriodError = CEC_LongBitPeriodError_Off; + CEC_InitStruct->CEC_BRDNoGen = CEC_BRDNoGen_Off; + CEC_InitStruct->CEC_SFTOption = CEC_SFTOption_Off; +} + +/** + * @brief Enables or disables the CEC peripheral. + * @param NewState: new state of the CEC peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_Cmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the CEC peripheral */ + CEC->CR |= CEC_CR_CECEN; + } + else + { + /* Disable the CEC peripheral */ + CEC->CR &= ~CEC_CR_CECEN; + } +} + +/** + * @brief Enables or disables the CEC Listen Mode. + * @param NewState: new state of the Listen Mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_ListenModeCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Listen Mode */ + CEC->CFGR |= CEC_CFGR_LSTN; + } + else + { + /* Disable the Listen Mode */ + CEC->CFGR &= ~CEC_CFGR_LSTN; + } +} + +/** + * @brief Defines the Own Address of the CEC device. + * @param CEC_OwnAddress: The CEC own address. + * @retval None + */ +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress) +{ + uint32_t tmp =0x00; + /* Check the parameters */ + assert_param(IS_CEC_ADDRESS(CEC_OwnAddress)); + tmp = 1 <<(CEC_OwnAddress + 16); + /* Set the CEC own address */ + CEC->CFGR |= tmp; +} + +/** + * @brief Clears the Own Address of the CEC device. + * @param CEC_OwnAddress: The CEC own address. + * @retval None + */ +void CEC_OwnAddressClear(void) +{ + /* Set the CEC own address */ + CEC->CFGR = 0x0; +} + +/** + * @} + */ + +/** @defgroup CEC_Group2 Data transfers functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### Data transfers functions ##### + =============================================================================== + [..] This section provides functions allowing the CEC data transfers.The read + access of the CEC_RXDR register can be done using the CEC_ReceiveData()function + and returns the Rx buffered value. Whereas a write access to the CEC_TXDR can be + done using CEC_SendData() function. +@endverbatim + * @{ + */ + +/** + * @brief Transmits single data through the CEC peripheral. + * @param Data: the data to transmit. + * @retval None + */ +void CEC_SendData(uint8_t Data) +{ + /* Transmit Data */ + CEC->TXDR = Data; +} + +/** + * @brief Returns the most recent received data by the CEC peripheral. + * @param None + * @retval The received data. + */ +uint8_t CEC_ReceiveData(void) +{ + /* Receive Data */ + return (uint8_t)(CEC->RXDR); +} + +/** + * @brief Starts a new message. + * @param None + * @retval None + */ +void CEC_StartOfMessage(void) +{ + /* Starts of new message */ + CEC->CR |= CEC_CR_TXSOM; +} + +/** + * @brief Transmits message with an EOM bit. + * @param None + * @retval None + */ +void CEC_EndOfMessage(void) +{ + /* The data byte will be transmitted with an EOM bit */ + CEC->CR |= CEC_CR_TXEOM; +} + +/** + * @} + */ + +/** @defgroup CEC_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions +* +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the CEC Interrupts + sources and check or clear the flags or pending bits status. + [..] The user should identify which mode will be used in his application to manage + the communication: Polling mode or Interrupt mode. + + [..] In polling mode, the CEC can be managed by the following flags: + (+) CEC_FLAG_TXACKE : to indicate a missing acknowledge in transmission mode. + (+) CEC_FLAG_TXERR : to indicate an error occurs during transmission mode. + The initiator detects low impedance in the CEC line. + (+) CEC_FLAG_TXUDR : to indicate if an underrun error occurs in transmission mode. + The transmission is enabled while the software has not yet + loaded any value into the TXDR register. + (+) CEC_FLAG_TXEND : to indicate the end of successful transmission. + (+) CEC_FLAG_TXBR : to indicate the next transmission data has to be written to TXDR. + (+) CEC_FLAG_ARBLST : to indicate arbitration lost in the case of two CEC devices + starting at the same time. + (+) CEC_FLAG_RXACKE : to indicate a missing acknowledge in receive mode. + (+) CEC_FLAG_LBPE : to indicate a long bit period error generated during receive mode. + (+) CEC_FLAG_SBPE : to indicate a short bit period error generated during receive mode. + (+) CEC_FLAG_BRE : to indicate a bit rising error generated during receive mode. + (+) CEC_FLAG_RXOVR : to indicate if an overrun error occur while receiving a CEC message. + A byte is not yet received while a new byte is stored in the RXDR register. + (+) CEC_FLAG_RXEND : to indicate the end Of reception + (+) CEC_FLAG_RXBR : to indicate a new byte has been received from the CEC line and + stored into the RXDR buffer. + [..] + (@)In this Mode, it is advised to use the following functions: + FlagStatus CEC_GetFlagStatus(uint16_t CEC_FLAG); + void CEC_ClearFlag(uint16_t CEC_FLAG); + + [..] In Interrupt mode, the CEC can be managed by the following interrupt sources: + (+) CEC_IT_TXACKE : to indicate a TX Missing acknowledge + (+) CEC_IT_TXACKE : to indicate a missing acknowledge in transmission mode. + (+) CEC_IT_TXERR : to indicate an error occurs during transmission mode. + The initiator detects low impedance in the CEC line. + (+) CEC_IT_TXUDR : to indicate if an underrun error occurs in transmission mode. + The transmission is enabled while the software has not yet + loaded any value into the TXDR register. + (+) CEC_IT_TXEND : to indicate the end of successful transmission. + (+) CEC_IT_TXBR : to indicate the next transmission data has to be written to TXDR register. + (+) CEC_IT_ARBLST : to indicate arbitration lost in the case of two CEC devices + starting at the same time. + (+) CEC_IT_RXACKE : to indicate a missing acknowledge in receive mode. + (+) CEC_IT_LBPE : to indicate a long bit period error generated during receive mode. + (+) CEC_IT_SBPE : to indicate a short bit period error generated during receive mode. + (+) CEC_IT_BRE : to indicate a bit rising error generated during receive mode. + (+) CEC_IT_RXOVR : to indicate if an overrun error occur while receiving a CEC message. + A byte is not yet received while a new byte is stored in the RXDR register. + (+) CEC_IT_RXEND : to indicate the end Of reception + (+) CEC_IT_RXBR : to indicate a new byte has been received from the CEC line and + stored into the RXDR buffer. + [..] + (@)In this Mode it is advised to use the following functions: + void CEC_ITConfig( uint16_t CEC_IT, FunctionalState NewState); + ITStatus CEC_GetITStatus(uint16_t CEC_IT); + void CEC_ClearITPendingBit(uint16_t CEC_IT); + + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the selected CEC interrupts. + * @param CEC_IT: specifies the CEC interrupt source to be enabled. + * This parameter can be any combination of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error + * @arg CEC_IT_TXERR: Tx Error. + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun. + * @arg CEC_IT_TXEND: End of Transmission (successful transmission of the last byte). + * @arg CEC_IT_TXBR: Tx-Byte Request. + * @arg CEC_IT_ARBLST: Arbitration Lost + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge + * @arg CEC_IT_LBPE: Rx Long period Error + * @arg CEC_IT_SBPE: Rx Short period Error + * @arg CEC_IT_BRE: Rx Bit Rising Error + * @arg CEC_IT_RXOVR: Rx Overrun. + * @arg CEC_IT_RXEND: End Of Reception + * @arg CEC_IT_RXBR: Rx-Byte Received + * @param NewState: new state of the selected CEC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_ITConfig(uint16_t CEC_IT, FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_CEC_IT(CEC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected CEC interrupt */ + CEC->IER |= CEC_IT; + } + else + { + CEC_IT =~CEC_IT; + /* Disable the selected CEC interrupt */ + CEC->IER &= CEC_IT; + } +} + +/** + * @brief Gets the CEC flag status. + * @param CEC_FLAG: specifies the CEC flag to check. + * This parameter can be one of the following values: + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rissing Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval The new state of CEC_FLAG (SET or RESET) + */ +FlagStatus CEC_GetFlagStatus(uint16_t CEC_FLAG) +{ + FlagStatus bitstatus = RESET; + + assert_param(IS_CEC_GET_FLAG(CEC_FLAG)); + + /* Check the status of the specified CEC flag */ + if ((CEC->ISR & CEC_FLAG) != (uint16_t)RESET) + { + /* CEC flag is set */ + bitstatus = SET; + } + else + { + /* CEC flag is reset */ + bitstatus = RESET; + } + + /* Return the CEC flag status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's pending flags. + * @param CEC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun + * @arg CEC_FLAG_RXEND: End Of Reception + * @arg CEC_FLAG_RXBR: Rx-Byte Received + * @retval None + */ +void CEC_ClearFlag(uint32_t CEC_FLAG) +{ + assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG)); + + /* Clear the selected CEC flag */ + CEC->ISR = CEC_FLAG; +} + +/** + * @brief Checks whether the specified CEC interrupt has occurred or not. + * @param CEC_IT: specifies the CEC interrupt source to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error + * @arg CEC_IT_TXERR: Tx Error. + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun. + * @arg CEC_IT_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_IT_TXBR: Tx-Byte Request. + * @arg CEC_IT_ARBLST: Arbitration Lost. + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge. + * @arg CEC_IT_LBPE: Rx Long period Error. + * @arg CEC_IT_SBPE: Rx Short period Error. + * @arg CEC_IT_BRE: Rx Bit Rising Error. + * @arg CEC_IT_RXOVR: Rx Overrun. + * @arg CEC_IT_RXEND: End Of Reception. + * @arg CEC_IT_RXBR: Rx-Byte Received + * @retval The new state of CEC_IT (SET or RESET). + */ +ITStatus CEC_GetITStatus(uint16_t CEC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + /* Get the CEC IT enable bit status */ + enablestatus = (CEC->IER & CEC_IT); + + /* Check the status of the specified CEC interrupt */ + if (((CEC->ISR & CEC_IT) != (uint32_t)RESET) && enablestatus) + { + /* CEC interrupt is set */ + bitstatus = SET; + } + else + { + /* CEC interrupt is reset */ + bitstatus = RESET; + } + + /* Return the CEC interrupt status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's interrupt pending bits. + * @param CEC_IT: specifies the CEC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error + * @arg CEC_IT_TXERR: Tx Error + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun + * @arg CEC_IT_TXEND: End of Transmission + * @arg CEC_IT_TXBR: Tx-Byte Request + * @arg CEC_IT_ARBLST: Arbitration Lost + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge + * @arg CEC_IT_LBPE: Rx Long period Error + * @arg CEC_IT_SBPE: Rx Short period Error + * @arg CEC_IT_BRE: Rx Bit Rising Error + * @arg CEC_IT_RXOVR: Rx Overrun + * @arg CEC_IT_RXEND: End Of Reception + * @arg CEC_IT_RXBR: Rx-Byte Received + * @retval None + */ +void CEC_ClearITPendingBit(uint16_t CEC_IT) +{ + assert_param(IS_CEC_IT(CEC_IT)); + + /* Clear the selected CEC interrupt pending bits */ + CEC->ISR = CEC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_comp.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_comp.c new file mode 100644 index 0000000..a0c07a4 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_comp.c @@ -0,0 +1,400 @@ +/** + ****************************************************************************** + * @file stm32f0xx_comp.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the comparators (COMP1 and COMP2) peripheral + * applicable only on STM32F051 and STM32F072 devices: + * + Comparators configuration + * + Window mode control + * + * @verbatim + * + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + + The device integrates two analog comparators COMP1 and COMP2: + (+) The non inverting input is set to PA1 for COMP1 and to PA3 + for COMP2. + + (+) The inverting input can be selected among: DAC1_OUT, DAC2_OUT + 1/4 VREFINT, 1/2 VERFINT, 3/4 VREFINT, VREFINT, + I/O (PA0 for COMP1 and PA2 for COMP2) + + (+) The COMP output is internally is available using COMP_GetOutputLevel() + and can be set on GPIO pins: PA0, PA6, PA11 for COMP1 + and PA2, PA7, PA12 for COMP2 + + (+) The COMP output can be redirected to embedded timers (TIM1, TIM2 + and TIM3) + + (+) The two comparators COMP1 and COMP2 can be combined in window + mode and only COMP1 non inverting (PA1) can be used as non- + inverting input. + + (+) The two comparators COMP1 and COMP2 have interrupt capability + with wake-up from Sleep and Stop modes (through the EXTI controller). + COMP1 and COMP2 outputs are internally connected to EXTI Line 21 + and EXTI Line 22 respectively. + + + ##### How to configure the comparator ##### + =============================================================================== + [..] + This driver provides functions to configure and program the Comparators + of all STM32F0xx devices. + + [..] To use the comparator, perform the following steps: + + (#) Enable the SYSCFG APB clock to get write access to comparator + register using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + + (#) Configure the comparator input in analog mode using GPIO_Init() + + (#) Configure the comparator output in alternate function mode + using GPIO_Init() and use GPIO_PinAFConfig() function to map the + comparator output to the GPIO pin + + (#) Configure the comparator using COMP_Init() function: + (++) Select the inverting input + (++) Select the output polarity + (++) Select the output redirection + (++) Select the hysteresis level + (++) Select the power mode + + (#) Enable the comparator using COMP_Cmd() function + + (#) If required enable the COMP interrupt by configuring and enabling + EXTI line in Interrupt mode and selecting the desired sensitivity + level using EXTI_Init() function. After that enable the comparator + interrupt vector using NVIC_Init() function. + + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_comp.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup COMP + * @brief COMP driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* CSR register Mask */ +#define COMP_CSR_CLEAR_MASK ((uint32_t)0x00003FFE) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup COMP_Private_Functions + * @{ + */ + +/** @defgroup COMP_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes COMP peripheral registers to their default reset values. + * @note Deinitialization can't be performed if the COMP configuration is locked. + * To unlock the configuration, perform a system reset. + * @param None + * @retval None + */ +void COMP_DeInit(void) +{ + COMP->CSR = ((uint32_t)0x00000000); /*!< Set COMP_CSR register to reset value */ +} + +/** + * @brief Initializes the COMP peripheral according to the specified parameters + * in COMP_InitStruct + * @note If the selected comparator is locked, initialization can't be performed. + * To unlock the configuration, perform a system reset. + * @note By default, PA1 is selected as COMP1 non inverting input. + * To use PA4 as COMP1 non inverting input call COMP_SwitchCmd() after COMP_Init() + * @param COMP_Selection: the selected comparator. + * This parameter can be one of the following values: + * @arg COMP_Selection_COMP1: COMP1 selected + * @arg COMP_Selection_COMP2: COMP2 selected + * @param COMP_InitStruct: pointer to an COMP_InitTypeDef structure that contains + * the configuration information for the specified COMP peripheral. + * @retval None + */ +void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_PERIPH(COMP_Selection)); + assert_param(IS_COMP_INVERTING_INPUT(COMP_InitStruct->COMP_InvertingInput)); + assert_param(IS_COMP_OUTPUT(COMP_InitStruct->COMP_Output)); + assert_param(IS_COMP_OUTPUT_POL(COMP_InitStruct->COMP_OutputPol)); + assert_param(IS_COMP_HYSTERESIS(COMP_InitStruct->COMP_Hysteresis)); + assert_param(IS_COMP_MODE(COMP_InitStruct->COMP_Mode)); + + /*!< Get the COMP_CSR register value */ + tmpreg = COMP->CSR; + + /*!< Clear the COMP1SW1, COMPx_IN_SEL, COMPx_OUT_TIM_SEL, COMPx_POL, COMPx_HYST and COMPx_PWR_MODE bits */ + tmpreg &= (uint32_t) ~(COMP_CSR_CLEAR_MASK<COMP_InvertingInput value */ + /*!< Set COMPxOUTSEL bits according to COMP_InitStruct->COMP_Output value */ + /*!< Set COMPxPOL bit according to COMP_InitStruct->COMP_OutputPol value */ + /*!< Set COMPxHYST bits according to COMP_InitStruct->COMP_Hysteresis value */ + /*!< Set COMPxMODE bits according to COMP_InitStruct->COMP_Mode value */ + tmpreg |= (uint32_t)((COMP_InitStruct->COMP_InvertingInput | COMP_InitStruct->COMP_Output | + COMP_InitStruct->COMP_OutputPol | COMP_InitStruct->COMP_Hysteresis | + COMP_InitStruct->COMP_Mode)<CSR = tmpreg; +} + +/** + * @brief Fills each COMP_InitStruct member with its default value. + * @param COMP_InitStruct: pointer to an COMP_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct) +{ + COMP_InitStruct->COMP_InvertingInput = COMP_InvertingInput_1_4VREFINT; + COMP_InitStruct->COMP_Output = COMP_Output_None; + COMP_InitStruct->COMP_OutputPol = COMP_OutputPol_NonInverted; + COMP_InitStruct->COMP_Hysteresis = COMP_Hysteresis_No; + COMP_InitStruct->COMP_Mode = COMP_Mode_UltraLowPower; +} + +/** + * @brief Enable or disable the COMP peripheral. + * @note If the selected comparator is locked, enable/disable can't be performed. + * To unlock the configuration, perform a system reset. + * @param COMP_Selection: the selected comparator. + * This parameter can be one of the following values: + * @arg COMP_Selection_COMP1: COMP1 selected + * @arg COMP_Selection_COMP2: COMP2 selected + * @param NewState: new state of the COMP peripheral. + * This parameter can be: ENABLE or DISABLE. + * @note When enabled, the comparator compares the non inverting input with + * the inverting input and the comparison result is available on comparator output. + * @note When disabled, the comparator doesn't perform comparison and the + * output level is low. + * @retval None + */ +void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_COMP_ALL_PERIPH(COMP_Selection)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected COMP peripheral */ + COMP->CSR |= (uint32_t) (1<CSR &= (uint32_t)(~((uint32_t)1<CSR |= (uint32_t) (COMP_CSR_COMP1SW1); + } + else + { + /* Open SW1 switch */ + COMP->CSR &= (uint32_t)(~COMP_CSR_COMP1SW1); + } +} + +/** + * @brief Return the output level (high or low) of the selected comparator. + * @note The output level depends on the selected polarity. + * @note If the polarity is not inverted: + * - Comparator output is low when the non-inverting input is at a lower + * voltage than the inverting input + * - Comparator output is high when the non-inverting input is at a higher + * voltage than the inverting input + * @note If the polarity is inverted: + * - Comparator output is high when the non-inverting input is at a lower + * voltage than the inverting input + * - Comparator output is low when the non-inverting input is at a higher + * voltage than the inverting input + * @param COMP_Selection: the selected comparator. + * This parameter can be one of the following values: + * @arg COMP_Selection_COMP1: COMP1 selected + * @arg COMP_Selection_COMP2: COMP2 selected + * @retval Returns the selected comparator output level: low or high. + * + */ +uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection) +{ + uint32_t compout = 0x0; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_PERIPH(COMP_Selection)); + + /* Check if selected comparator output is high */ + if ((COMP->CSR & (COMP_CSR_COMP1OUT<CSR |= (uint32_t) COMP_CSR_WNDWEN; + } + else + { + /* Disable the window mode */ + COMP->CSR &= (uint32_t)(~COMP_CSR_WNDWEN); + } +} + +/** + * @} + */ + +/** @defgroup COMP_Group3 COMP configuration locking function + * @brief COMP1 and COMP2 configuration locking function + * COMP1 and COMP2 configuration can be locked each separately. + * Unlocking is performed by system reset. + * +@verbatim + =============================================================================== + ##### Configuration Lock function ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Lock the selected comparator (COMP1/COMP2) configuration. + * @note Locking the configuration means that all control bits are read-only. + * To unlock the comparator configuration, perform a system reset. + * @param COMP_Selection: selects the comparator to be locked + * This parameter can be a value of the following values: + * @arg COMP_Selection_COMP1: COMP1 configuration is locked. + * @arg COMP_Selection_COMP2: COMP2 configuration is locked. + * @retval None + */ +void COMP_LockConfig(uint32_t COMP_Selection) +{ + /* Check the parameter */ + assert_param(IS_COMP_ALL_PERIPH(COMP_Selection)); + + /* Set the lock bit corresponding to selected comparator */ + COMP->CSR |= (uint32_t) (COMP_CSR_COMP1LOCK<DR = 0xFFFFFFFF; + + /* Set the POL register to the reset value: 0x04C11DB7 */ + CRC->POL = 0x04C11DB7; + + /* Reset IDR register */ + CRC->IDR = 0x00; + + /* Set INIT register to reset value */ + CRC->INIT = 0xFFFFFFFF; + + /* Reset the CRC calculation unit */ + CRC->CR = CRC_CR_RESET; +} + +/** + * @brief Resets the CRC calculation unit and sets INIT register content in DR register. + * @param None + * @retval None + */ +void CRC_ResetDR(void) +{ + /* Reset CRC generator */ + CRC->CR |= CRC_CR_RESET; +} + +/** + * @brief Selects the polynomial size. This function is only applicable for + * STM32F072 devices. + * @param CRC_PolSize: Specifies the polynomial size. + * This parameter can be: + * @arg CRC_PolSize_7: 7-bit polynomial for CRC calculation + * @arg CRC_PolSize_8: 8-bit polynomial for CRC calculation + * @arg CRC_PolSize_16: 16-bit polynomial for CRC calculation + * @arg CRC_PolSize_32: 32-bit polynomial for CRC calculation + * @retval None + */ +void CRC_PolynomialSizeSelect(uint32_t CRC_PolSize) +{ + uint32_t tmpcr = 0; + + /* Check the parameter */ + assert_param(IS_CRC_POL_SIZE(CRC_PolSize)); + + /* Get CR register value */ + tmpcr = CRC->CR; + + /* Reset POL_SIZE bits */ + tmpcr &= (uint32_t)~((uint32_t)CRC_CR_POLSIZE); + /* Set the polynomial size */ + tmpcr |= (uint32_t)CRC_PolSize; + + /* Write to CR register */ + CRC->CR = (uint32_t)tmpcr; +} + +/** + * @brief Selects the reverse operation to be performed on input data. + * @param CRC_ReverseInputData: Specifies the reverse operation on input data. + * This parameter can be: + * @arg CRC_ReverseInputData_No: No reverse operation is performed + * @arg CRC_ReverseInputData_8bits: reverse operation performed on 8 bits + * @arg CRC_ReverseInputData_16bits: reverse operation performed on 16 bits + * @arg CRC_ReverseInputData_32bits: reverse operation performed on 32 bits + * @retval None + */ +void CRC_ReverseInputDataSelect(uint32_t CRC_ReverseInputData) +{ + uint32_t tmpcr = 0; + + /* Check the parameter */ + assert_param(IS_CRC_REVERSE_INPUT_DATA(CRC_ReverseInputData)); + + /* Get CR register value */ + tmpcr = CRC->CR; + + /* Reset REV_IN bits */ + tmpcr &= (uint32_t)~((uint32_t)CRC_CR_REV_IN); + /* Set the reverse operation */ + tmpcr |= (uint32_t)CRC_ReverseInputData; + + /* Write to CR register */ + CRC->CR = (uint32_t)tmpcr; +} + +/** + * @brief Enables or disable the reverse operation on output data. + * The reverse operation on output data is performed on 32-bit. + * @param NewState: new state of the reverse operation on output data. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRC_ReverseOutputDataCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable reverse operation on output data */ + CRC->CR |= CRC_CR_REV_OUT; + } + else + { + /* Disable reverse operation on output data */ + CRC->CR &= (uint32_t)~((uint32_t)CRC_CR_REV_OUT); + } +} + +/** + * @brief Initializes the INIT register. + * @note After resetting CRC calculation unit, CRC_InitValue is stored in DR register + * @param CRC_InitValue: Programmable initial CRC value + * @retval None + */ +void CRC_SetInitRegister(uint32_t CRC_InitValue) +{ + CRC->INIT = CRC_InitValue; +} + +/** + * @brief Initializes the polynomail coefficients. This function is only + * applicable for STM32F072 devices. + * @param CRC_Pol: Polynomial to be used for CRC calculation. + * @retval None + */ +void CRC_SetPolynomial(uint32_t CRC_Pol) +{ + CRC->POL = CRC_Pol; +} + +/** + * @} + */ + +/** @defgroup CRC_Group2 CRC computation of one/many 32-bit data functions + * @brief CRC computation of one/many 32-bit data functions + * +@verbatim + =============================================================================== + ##### CRC computation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * @param CRC_Data: data word(32-bit) to compute its CRC + * @retval 32-bit CRC + */ +uint32_t CRC_CalcCRC(uint32_t CRC_Data) +{ + CRC->DR = CRC_Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 16-bit CRC of a given 16-bit data. This function is only + * applicable for STM32F072 devices. + * @param CRC_Data: data half-word(16-bit) to compute its CRC + * @retval 16-bit CRC + */ +uint32_t CRC_CalcCRC16bits(uint16_t CRC_Data) +{ + *(uint16_t*)(CRC_BASE) = (uint16_t) CRC_Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 8-bit CRC of a given 8-bit data. This function is only + * applicable for STM32F072 devices. + * @param CRC_Data: 8-bit data to compute its CRC + * @retval 8-bit CRC + */ +uint32_t CRC_CalcCRC8bits(uint8_t CRC_Data) +{ + *(uint8_t*)(CRC_BASE) = (uint8_t) CRC_Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++) + { + CRC->DR = pBuffer[index]; + } + return (CRC->DR); +} + +/** + * @brief Returns the current CRC value. + * @param None + * @retval 32-bit CRC + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DR); +} + +/** + * @} + */ + +/** @defgroup CRC_Group3 CRC Independent Register (IDR) access functions + * @brief CRC Independent Register (IDR) access (write/read) functions + * +@verbatim + =============================================================================== + ##### CRC Independent Register (IDR) access functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Stores an 8-bit data in the Independent Data(ID) register. + * @param CRC_IDValue: 8-bit value to be stored in the ID register + * @retval None + */ +void CRC_SetIDRegister(uint8_t CRC_IDValue) +{ + CRC->IDR = CRC_IDValue; +} + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register + * @param None + * @retval 8-bit value of the ID register + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDR); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crs.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crs.c new file mode 100644 index 0000000..2b661d7 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crs.c @@ -0,0 +1,458 @@ +/** + ****************************************************************************** + * @file stm32f0xx_crs.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of CRS peripheral applicable only on STM32F042 and + * STM32F072 devices: + * + Configuration of the CRS peripheral + * + Interrupts and flags management + * + * + * @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + + (+) Enable CRS AHB clock using RCC_APB1eriphClockCmd(RCC_APB1Periph_CRS, ENABLE) + function + + + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_crs.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRS + * @brief CRS driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* CRS Flag Mask */ +#define FLAG_MASK ((uint32_t)0x700) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRS_Private_Functions + * @{ + */ + +/** @defgroup CRS_Group1 Configuration of the CRS functions + * @brief Configuration of the CRS functions + * +@verbatim + =============================================================================== + ##### CRS configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes CRS peripheral registers to their default reset values. + * @param None + * @retval None + */ +void CRS_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CRS, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CRS, DISABLE); +} + +/** + * @brief Adjusts the Internal High Speed 48 oscillator (HSI 48) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI48 RC. + * @note This function can be called only when the AUTOTRIMEN bit is reset. + * @param CRS_HSI48CalibrationValue: + * @retval None + */ +void CRS_AdjustHSI48CalibrationValue(uint8_t CRS_HSI48CalibrationValue) +{ + /* Clear TRIM[5:0] bits */ + CRS->CR &= ~CRS_CR_TRIM; + + /* Set the TRIM[5:0] bits according to CRS_HSI48CalibrationValue value */ + CRS->CR |= (uint32_t)((uint32_t)CRS_HSI48CalibrationValue << 8); + +} + +/** + * @brief Enables or disables the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @param NewState: new state of the frequency error counter. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRS_FrequencyErrorCounterCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + CRS->CR |= CRS_CR_CEN; + } + else + { + CRS->CR &= ~CRS_CR_CEN; + } +} + +/** + * @brief Enables or disables the automatic hardware adjustement of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @param NewState: new state of the automatic trimming. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRS_AutomaticCalibrationCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + CRS->CR |= CRS_CR_AUTOTRIMEN; + } +else + { + CRS->CR &= ~CRS_CR_AUTOTRIMEN; + } +} + +/** + * @brief Generate the software synchronization event + * @param None + * @retval None + */ +void CRS_SoftwareSynchronizationGenerate(void) +{ + CRS->CR |= CRS_CR_SWSYNC; +} + +/** + * @brief Adjusts the Internal High Speed 48 oscillator (HSI 48) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI48 RC. + * @note This function can be called only when the CEN bit is reset. + * @param CRS_ReloadValue: specifies the HSI calibration trimming value. + * This parameter must be a number between 0 and . + * @retval None + */ +void CRS_FrequencyErrorCounterReload(uint32_t CRS_ReloadValue) +{ + + /* Clear RELOAD[15:0] bits */ + CRS->CFGR &= ~CRS_CFGR_RELOAD; + + /* Set the RELOAD[15:0] bits according to CRS_ReloadValue value */ + CRS->CFGR |= (uint32_t)CRS_ReloadValue; + +} + +/** + * @brief + * @note This function can be called only when the CEN bit is reset. + * @param CRS_ErrorLimitValue: specifies the HSI calibration trimming value. + * This parameter must be a number between 0 and . + * @retval None + */ +void CRS_FrequencyErrorLimitConfig(uint8_t CRS_ErrorLimitValue) +{ + /* Clear FELIM[7:0] bits */ + CRS->CFGR &= ~CRS_CFGR_FELIM; + + /* Set the FELIM[7:0] bits according to CRS_ErrorLimitValue value */ + CRS->CFGR |= (uint32_t)CRS_ErrorLimitValue; +} + +/** + * @brief + * @note This function can be called only when the CEN bit is reset. + * @param CRS_Prescaler: specifies the HSI calibration trimming value. + * This parameter can be one of the following values: + * @arg CRS_SYNC_Div1: + * @arg CRS_SYNC_Div2: + * @arg CRS_SYNC_Div4: + * @arg CRS_SYNC_Div8: + * @arg CRS_SYNC_Div16: + * @arg CRS_SYNC_Div32: + * @arg CRS_SYNC_Div64: + * @arg CRS_SYNC_Div128: + * @retval None + */ +void CRS_SynchronizationPrescalerConfig(uint32_t CRS_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_CRS_SYNC_DIV(CRS_Prescaler)); + + /* Clear SYNCDIV[2:0] bits */ + CRS->CFGR &= ~CRS_CFGR_SYNCDIV; + + /* Set the CRS_CFGR_SYNCDIV[2:0] bits according to CRS_Prescaler value */ + CRS->CFGR |= CRS_Prescaler; +} + +/** + * @brief + * @note This function can be called only when the CEN bit is reset. + * @param CRS_Source: . + * This parameter can be one of the following values: + * @arg CRS_SYNCSource_GPIO: + * @arg CRS_SYNCSource_LSE: + * @arg CRS_SYNCSource_USB: + * @retval None + */ +void CRS_SynchronizationSourceConfig(uint32_t CRS_Source) +{ + /* Check the parameters */ + assert_param(IS_CRS_SYNC_SOURCE(CRS_Source)); + + /* Clear SYNCSRC[1:0] bits */ + CRS->CFGR &= ~CRS_CFGR_SYNCSRC; + + /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ + CRS->CFGR |= CRS_Source; +} + +/** + * @brief + * @note This function can be called only when the CEN bit is reset. + * @param CRS_Polarity: . + * This parameter can be one of the following values: + * @arg CRS_SYNCPolarity_Rising: + * @arg CRS_SYNCPolarity_Falling: + * @retval None + */ +void CRS_SynchronizationPolarityConfig(uint32_t CRS_Polarity) +{ + /* Check the parameters */ + assert_param(IS_CRS_SYNC_POLARITY(CRS_Polarity)); + + /* Clear SYNCSPOL bit */ + CRS->CFGR &= ~CRS_CFGR_SYNCPOL; + + /* Set the SYNCSPOL bits according to CRS_Polarity value */ + CRS->CFGR |= CRS_Polarity; +} + +/** + * @brief Returns the Relaod value. + * @param None + * @retval The reload value + */ +uint32_t CRS_GetReloadValue(void) +{ + return ((uint32_t)(CRS->CFGR & CRS_CFGR_RELOAD)); +} + +/** + * @brief Returns the HSI48 Calibration value. + * @param None + * @retval The reload value + */ +uint32_t CRS_GetHSI48CalibrationValue(void) +{ + return (((uint32_t)(CRS->CR & CRS_CR_TRIM)) >> 8); +} + +/** + * @brief Returns the frequency error capture. + * @param None + * @retval The frequency error capture value + */ +uint32_t CRS_GetFrequencyErrorValue(void) +{ + return ((uint32_t)(CRS->ISR & CRS_ISR_FECAP)); +} + +/** + * @brief Returns the frequency error direction. + * @param None + * @retval The frequency error direction. The returned value can be one + * of the following values: + * - 0x00: Up counting + * - 0x8000: Down counting + */ +uint32_t CRS_GetFrequencyErrorDirection(void) +{ + return ((uint32_t)(CRS->ISR & CRS_ISR_FEDIR)); +} + +/** @defgroup CRS_Group2 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== +@endverbatim + * @{ + */ +/** + * @brief Enables or disables the specified CRS interrupts. + * @param CRS_IT: specifies the RCC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg CRS_IT_SYNCOK: + * @arg CRS_IT_SYNCWARN: + * @arg CRS_IT_ERR: + * @arg CRS_IT_ESYNC: + * @param NewState: new state of the specified CRS interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRS_ITConfig(uint32_t CRS_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CRS_IT(CRS_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + CRS->CR |= CRS_IT; + } + else + { + CRS->CR &= ~CRS_IT; + } +} + +/** + * @brief Checks whether the specified CRS flag is set or not. + * @param CRS_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CRS_FLAG_SYNCOK: + * @arg CRS_FLAG_SYNCWARN: + * @arg CRS_FLAG_ERR: + * @arg CRS_FLAG_ESYNC: + * @arg CRS_FLAG_TRIMOVF: + * @arg CRS_FLAG_SYNCERR: + * @arg CRS_FLAG_SYNCMISS: + * @retval The new state of CRS_FLAG (SET or RESET). + */ +FlagStatus CRS_GetFlagStatus(uint32_t CRS_FLAG) +{ + /* Check the parameters */ + assert_param(IS_CRS_FLAG(CRS_FLAG)); + + return ((FlagStatus)(CRS->ISR & CRS_FLAG)); +} + +/** + * @brief Clears the CRS specified FLAG. + * @param CRS_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CRS_FLAG_SYNCOK: + * @arg CRS_FLAG_SYNCWARN: + * @arg CRS_FLAG_ERR: + * @arg CRS_FLAG_ESYNC: + * @arg CRS_FLAG_TRIMOVF: + * @arg CRS_FLAG_SYNCERR: + * @arg CRS_FLAG_SYNCMISS: + * @retval None + */ +void CRS_ClearFlag(uint32_t CRS_FLAG) +{ + /* Check the parameters */ + assert_param(IS_CRS_FLAG(CRS_FLAG)); + + if ((CRS_FLAG & FLAG_MASK)!= 0) + { + CRS->ICR |= CRS_ICR_ERRC; + } + else + { + CRS->ICR |= CRS_FLAG; + } +} + +/** + * @brief Checks whether the specified CRS IT pending bit is set or not. + * @param CRS_IT: specifies the IT pending bit to check. + * This parameter can be one of the following values: + * @arg CRS_IT_SYNCOK: + * @arg CRS_IT_SYNCWARN: + * @arg CRS_IT_ERR: + * @arg CRS_IT_ESYNC: + * @arg CRS_IT_TRIMOVF: + * @arg CRS_IT_SYNCERR: + * @arg CRS_IT_SYNCMISS: + * @retval The new state of CRS_IT (SET or RESET). + */ +ITStatus CRS_GetITStatus(uint32_t CRS_IT) +{ + /* Check the parameters */ + assert_param(IS_CRS_GET_IT(CRS_IT)); + + return ((ITStatus)(CRS->ISR & CRS_IT)); +} + +/** + * @brief Clears the CRS specified IT pending bi. + * @param CRS_FLAG: specifies the IT pending bi to clear. + * This parameter can be one of the following values: + * @arg CRS_IT_SYNCOK: + * @arg CRS_IT_SYNCWARN: + * @arg CRS_IT_ERR: + * @arg CRS_IT_ESYNC: + * @arg CRS_IT_TRIMOVF: + * @arg CRS_IT_SYNCERR: + * @arg CRS_IT_SYNCMISS: + * @retval None + */ +void CRS_ClearITPendingBit(uint32_t CRS_IT) +{ + /* Check the parameters */ + assert_param(IS_CRS_CLEAR_IT(CRS_IT)); + + if ((CRS_IT & FLAG_MASK)!= 0) + { + CRS->ICR |= CRS_ICR_ERRC; + } + else + { + CRS->ICR |= CRS_IT; + } +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dac.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dac.c new file mode 100644 index 0000000..f0abf9d --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dac.c @@ -0,0 +1,684 @@ +/** + ****************************************************************************** + * @file stm32f0xx_dac.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Digital-to-Analog Converter (DAC) peripheral + * applicable only on STM32F051 and STM32F072 devices: + * + DAC channel configuration: trigger, output buffer, data format + * + DMA management + * + Interrupts and flags management + * + * @verbatim + * + =============================================================================== + ##### DAC Peripheral features ##### + =============================================================================== + [..] The device integrates two 12-bit Digital Analog Converters refered as + DAC channel1 with DAC_OUT1 (PA4) and DAC_OUT2 (PA5) as outputs. + + [..] Digital to Analog conversion can be non-triggered using DAC_Trigger_None + and DAC_OUTx is available once writing to DHRx register using + DAC_SetChannel1Data() or DAC_SetChannel2Data() + + [..] Digital to Analog conversion can be triggered by: + (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_Trigger_Ext_IT9. + The used pin (GPIOx_Pin9) must be configured in input mode. + + (#) Timers TRGO: TIM2, TIM3,TIM7, TIM6 and TIM15 + (DAC_Trigger_T2_TRGO, DAC_Trigger_T3_TRGO...) + The timer TRGO event should be selected using TIM_SelectOutputTrigger() + + (#) Software using DAC_Trigger_Software + + [..] Each DAC integrates an output buffer that can be used to + reduce the output impedance, and to drive external loads directly + without having to add an external operational amplifier. + To enable the output buffer use + DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable; + + [..] Refer to the device datasheet for more details about output impedance + value with and without output buffer. + + [..] DAC wave generation feature + Both DAC channels can be used to generate + 1- Noise wave using DAC_WaveGeneration_Noise + 2- Triangle wave using DAC_WaveGeneration_Triangle + + [..] The DAC data format can be: + (#) 8-bit right alignment using DAC_Align_8b_R + (#) 12-bit left alignment using DAC_Align_12b_L + (#) 12-bit right alignment using DAC_Align_12b_R + + [..] The analog output voltage on each DAC channel pin is determined + by the following equation: DAC_OUTx = VREF+ * DOR / 4095 + with DOR is the Data Output Register + VEF+ is the input voltage reference (refer to the device datasheet) + e.g. To set DAC_OUT1 to 0.7V, use + DAC_SetChannel1Data(DAC_Align_12b_R, 868); + Assuming that VREF+ = 3.3, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V + + [..] A DMA1 request can be generated when an external trigger (but not + a software trigger) occurs if DMA1 requests are enabled using + DAC_DMACmd() + DMA1 requests are mapped as following: + (+) DAC channel1 is mapped on DMA1 channel3 which must be already + configured + (+) DAC channel2 is mapped on DMA1 channel4 which must be already + configured + + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable DAC APB1 clock to get write access to DAC registers + using RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE) + + (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode + using GPIO_Init() function + + (+) Configure the DAC channel using DAC_Init() + + (+) Enable the DAC channel using DAC_Cmd() + + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_dac.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DAC + * @brief DAC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* CR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0x00000FFE) /* check the value of the mask */ + +/* DAC Dual Channels SWTRIG masks */ +#define DUAL_SWTRIG_SET ((uint32_t)0x00000003) /*!< Only applicable for STM32F072 devices */ +#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC) /*!< Only applicable for STM32F072 devices */ + +/* DHR registers offsets */ +#define DHR12R1_OFFSET ((uint32_t)0x00000008) +#define DHR12R2_OFFSET ((uint32_t)0x00000014) /*!< Only applicable for STM32F072 devices */ +#define DHR12RD_OFFSET ((uint32_t)0x00000020) /*!< Only applicable for STM32F072 devices */ + +/* DOR register offset */ +#define DOR_OFFSET ((uint32_t)0x0000002C) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DAC_Private_Functions + * @{ + */ + +/** @defgroup DAC_Group1 DAC channels configuration + * @brief DAC channels configuration: trigger, output buffer, data format + * +@verbatim + =============================================================================== + ##### DAC channels configuration: trigger, output buffer, data format ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the DAC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void DAC_DeInit(void) +{ + /* Enable DAC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); + /* Release DAC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); +} + +/** + * @brief Initializes the DAC peripheral according to the specified parameters + * in the DAC_InitStruct. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that contains + * the configuration information for the specified DAC channel. + * @retval None + */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); + assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); + +/*---------------------------- DAC CR Configuration --------------------------*/ + /* Get the DAC CR value */ + tmpreg1 = DAC->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel); + /* Configure for the selected DAC channel: buffer output, trigger, + wave generation, mask/amplitude for wave generation */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set WAVEx bits according to DAC_WaveGeneration value */ + /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | \ + DAC_InitStruct->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << DAC_Channel; + /* Write to DAC CR */ + DAC->CR = tmpreg1; +} + +/** + * @brief Fills each DAC_InitStruct member with its default value. + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) +{ +/*--------------- Reset DAC init structure parameters values -----------------*/ + /* Initialize the DAC_Trigger member */ + DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; + + /* Initialize the DAC_WaveGeneration member */ + DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; + + /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; + + /* Initialize the DAC_OutputBuffer member */ + DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; +} + +/** + * @brief Enables or disables the specified DAC channel. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param NewState: new state of the DAC channel. + * This parameter can be: ENABLE or DISABLE. + * @note When the DAC channel is enabled the trigger source can no more be modified. + * @retval None + */ +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC channel */ + DAC->CR |= (DAC_CR_EN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel */ + DAC->CR &= (~(DAC_CR_EN1 << DAC_Channel)); + } +} + +/** + * @brief Enables or disables the selected DAC channel software trigger. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param NewState: new state of the selected DAC channel software trigger. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable software trigger for the selected DAC channel */ + DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4); + } + else + { + /* Disable software trigger for the selected DAC channel */ + DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4)); + } +} + +/** + * @brief Enables or disables simultaneously the two DAC channels software triggers. + * This function is applicable only for STM32F072 devices. + * @param NewState: new state of the DAC channels software triggers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable software trigger for both DAC channels */ + DAC->SWTRIGR |= DUAL_SWTRIG_SET; + } + else + { + /* Disable software trigger for both DAC channels */ + DAC->SWTRIGR &= DUAL_SWTRIG_RESET; + } +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * This function is applicable only for STM32F072 devices. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_Wave: specifies the wave type to enable or disable. + * This parameter can be: + * @arg DAC_Wave_Noise: noise wave generation + * @arg DAC_Wave_Triangle: triangle wave generation + * @param NewState: new state of the selected DAC channel wave generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_WAVE(DAC_Wave)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected wave generation for the selected DAC channel */ + DAC->CR |= DAC_Wave << DAC_Channel; + } + else + { + /* Disable the selected wave generation for the selected DAC channel */ + DAC->CR &= ~(DAC_Wave << DAC_Channel); + } +} + +/** + * @brief Set the specified data holding register value for DAC channel1. + * @param DAC_Align: Specifies the data alignment for DAC channel1. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data: Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R1_OFFSET + DAC_Align; + + /* Set the DAC channel1 selected data holding register */ + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Sets the specified data holding register value for DAC channel2. + * This function is applicable only for STM32F072 devices. + * @param DAC_Align: Specifies the data alignment for DAC channel2. + * This parameter can be: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data: Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R2_OFFSET + DAC_Align; + + /* Set the DAC channel2 selected data holding register */ + *(__IO uint32_t *)tmp = Data; +} + +/** + * @brief Sets the specified data holding register value for dual channel DAC. + * This function is applicable only for STM32F072 devices. + * @param DAC_Align: Specifies the data alignment for dual channel DAC. + * This parameter can be: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data2: Data for DAC Channel2 to be loaded in the selected data holding register. + * @param Data1: Data for DAC Channel1 to be loaded in the selected data holding register. + * @note In dual mode, a unique register access is required to write in both + * DAC channels at the same time. + * @retval None + */ +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) +{ + uint32_t data = 0, tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (DAC_Align == DAC_Align_8b_R) + { + data = ((uint32_t)Data2 << 8) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16) | Data1; + } + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12RD_OFFSET + DAC_Align; + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; +} + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @retval The selected DAC channel data output value. + */ +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + + tmp = (uint32_t) DAC_BASE ; + tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2); + + /* Returns the DAC channel data output register value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +/** + * @} + */ + +/** @defgroup DAC_Group2 DMA management functions + * @brief DMA management functions + * +@verbatim + =============================================================================== + ##### DMA management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified DAC channel DMA request. + * When enabled DMA1 is generated when an external trigger (EXTI Line9, + * TIM2, TIM3, TIM6 or TIM15 but not a software trigger) occurs + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param NewState: new state of the selected DAC channel DMA request. + * This parameter can be: ENABLE or DISABLE. + * @note The DAC channel1 is mapped on DMA1 channel3 which must be already configured. + * @note The DAC channel2 is mapped on DMA1 channel4 which must be already configured. + * @retval None + */ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC channel DMA request */ + DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel DMA request */ + DAC->CR &= (~(DAC_CR_DMAEN1 << DAC_Channel)); + } +} + +/** + * @} + */ + +/** @defgroup DAC_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified DAC interrupts. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @param NewState: new state of the specified DAC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_DAC_IT(DAC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC interrupts */ + DAC->CR |= (DAC_IT << DAC_Channel); + } + else + { + /* Disable the selected DAC interrupts */ + DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel)); + } +} + +/** + * @brief Checks whether the specified DAC flag is set or not. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param DAC_FLAG: specifies the flag to check. + * This parameter can be only of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @retval The new state of DAC_FLAG (SET or RESET). + */ +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Check the status of the specified DAC flag */ + if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET) + { + /* DAC_FLAG is set */ + bitstatus = SET; + } + else + { + /* DAC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the DAC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channel's pending flags. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param DAC_FLAG: specifies the flag to clear. + * This parameter can be of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval None + */ +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Clear the selected DAC flags */ + DAC->SR = (DAC_FLAG << DAC_Channel); +} + +/** + * @brief Checks whether the specified DAC interrupt has occurred or not. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param DAC_IT: specifies the DAC interrupt source to check. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @retval The new state of DAC_IT (SET or RESET). + */ +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Get the DAC_IT enable bit status */ + enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ; + + /* Check the status of the specified DAC interrupt */ + if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus) + { + /* DAC_IT is set */ + bitstatus = SET; + } + else + { + /* DAC_IT is reset */ + bitstatus = RESET; + } + /* Return the DAC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channel's interrupt pending bits. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected, applicable only for STM32F072 devices + * @param DAC_IT: specifies the DAC interrupt pending bit to clear. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval None + */ +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Clear the selected DAC interrupt pending bits */ + DAC->SR = (DAC_IT << DAC_Channel); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c new file mode 100644 index 0000000..3c534f7 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c @@ -0,0 +1,210 @@ +/** + ****************************************************************************** + * @file stm32f0xx_dbgmcu.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Debug MCU (DBGMCU) peripheral: + * + Device and Revision ID management + * + Peripherals Configuration + * @verbatim + * @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_dbgmcu.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DBGMCU + * @brief DBGMCU driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DBGMCU_Private_Functions + * @{ + */ + + +/** @defgroup DBGMCU_Group1 Device and Revision ID management functions + * @brief Device and Revision ID management functions + * +@verbatim + ============================================================================== + ##### Device and Revision ID management functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Returns the device revision identifier. + * @param None + * @retval Device revision identifier + */ +uint32_t DBGMCU_GetREVID(void) +{ + return(DBGMCU->IDCODE >> 16); +} + +/** + * @brief Returns the device identifier. + * @param None + * @retval Device identifier + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); +} + +/** + * @} + */ + +/** @defgroup DBGMCU_Group2 Peripherals Configuration functions + * @brief Peripherals Configuration + * +@verbatim + ============================================================================== + ##### Peripherals Configuration functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures low power mode behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the low power mode. + * This parameter can be any combination of the following values: + * @arg DBGMCU_STOP: Keep debugger connection during STOP mode + * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode + * @param NewState: new state of the specified low power mode in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->CR |= DBGMCU_Periph; + } + else + { + DBGMCU->CR &= ~DBGMCU_Periph; + } +} + + +/** + * @brief Configures APB1 peripheral behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the APB1 peripheral. + * This parameter can be any combination of the following values: + * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted, + * not applicable for STM32F030 devices + * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted + * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted + * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted, + * applicable only for STM32F072 devices + * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted + * @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped + * when Core is halted. + * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted + * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted + * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped + * when Core is halted + * @arg DBGMCU_CAN1_STOP: Debug CAN1 stopped when Core is halted, + * applicable only for STM32F042 and STM32F072 devices + * @param NewState: new state of the specified APB1 peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->APB1FZ |= DBGMCU_Periph; + } + else + { + DBGMCU->APB1FZ &= ~DBGMCU_Periph; + } +} + +/** + * @brief Configures APB2 peripheral behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the APB2 peripheral. + * This parameter can be any combination of the following values: + * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted + * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted + * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted + * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted + * @param NewState: new state of the specified APB2 peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->APB2FZ |= DBGMCU_Periph; + } + else + { + DBGMCU->APB2FZ &= ~DBGMCU_Periph; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dma.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dma.c new file mode 100644 index 0000000..f3267b8 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dma.c @@ -0,0 +1,883 @@ +/** + ****************************************************************************** + * @file stm32f0xx_dma.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access controller (DMA): + * + Initialization and Configuration + * + Data Counter + * + Interrupts and flags management + * + * @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable The DMA controller clock using + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE) function for DMA1. + (#) Enable and configure the peripheral to be connected to the DMA channel + (except for internal SRAM / FLASH memories: no initialization is necessary). + (#) For a given Channel, program the Source and Destination addresses, + the transfer Direction, the Buffer Size, the Peripheral and Memory + Incrementation mode and Data Size, the Circular or Normal mode, + the channel transfer Priority and the Memory-to-Memory transfer + mode (if needed) using the DMA_Init() function. + (#) Enable the NVIC and the corresponding interrupt(s) using the function + DMA_ITConfig() if you need to use DMA interrupts. + (#) Enable the DMA channel using the DMA_Cmd() function. + (#) Activate the needed channel Request using PPP_DMACmd() function for + any PPP peripheral except internal SRAM and FLASH (ie. SPI, USART ...) + The function allowing this operation is provided in each PPP peripheral + driver (ie. SPI_DMACmd for SPI peripheral). + (#) Optionally, you can configure the number of data to be transferred + when the channel is disabled (ie. after each Transfer Complete event + or when a Transfer Error occurs) using the function DMA_SetCurrDataCounter(). + And you can get the number of remaining data to be transferred using + the function DMA_GetCurrDataCounter() at run time (when the DMA channel is + enabled and running). + (#) To control DMA events you can use one of the following two methods: + (##) Check on DMA channel flags using the function DMA_GetFlagStatus(). + (##) Use DMA interrupts through the function DMA_ITConfig() at initialization + phase and DMA_GetITStatus() function into interrupt routines in + communication phase. + After checking on a flag you should clear it using DMA_ClearFlag() + function. And after checking on an interrupt event you should + clear it using DMA_ClearITPendingBit() function. + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_dma.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DMA + * @brief DMA driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define CCR_CLEAR_MASK ((uint32_t)0xFFFF800F) /* DMA Channel config registers Masks */ +#define FLAG_Mask ((uint32_t)0x10000000) /* DMA2 FLAG mask */ + +/* DMA1 Channelx interrupt pending bit masks */ +#define DMA1_CHANNEL1_IT_MASK ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA1_CHANNEL2_IT_MASK ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA1_CHANNEL3_IT_MASK ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA1_CHANNEL4_IT_MASK ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA1_CHANNEL5_IT_MASK ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) +#define DMA1_CHANNEL6_IT_MASK ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6)) /*!< Only applicable for STM32F072 and STM32F091 devices */ +#define DMA1_CHANNEL7_IT_MASK ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7)) /*!< Only applicable for STM32F072 and STM32F091 devices */ + +/* DMA2 Channelx interrupt pending bit masks: Only applicable for STM32F091 devices */ +#define DMA2_CHANNEL1_IT_MASK ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA2_CHANNEL2_IT_MASK ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA2_CHANNEL3_IT_MASK ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA2_CHANNEL4_IT_MASK ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA2_CHANNEL5_IT_MASK ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Private_Functions + * @{ + */ + +/** @defgroup DMA_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This subsection provides functions allowing to initialize the DMA channel + source and destination addresses, incrementation and data sizes, transfer + direction, buffer size, circular/normal mode selection, memory-to-memory + mode selection and channel priority value. + [..] The DMA_Init() function follows the DMA configuration procedures as described + in reference manual (RM0091). +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the DMAy Channelx registers to their default reset + * values. + * @param DMAy_Channelx: where y can be 1 to select the DMA and + * x can be 1 to 7 for DMA1 to select the DMA Channel. + * @note Channel 6 and 7 are available only for STM32F072 devices. + * @retval None + */ +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR_EN); + + /* Reset DMAy Channelx control register */ + DMAy_Channelx->CCR = 0; + + /* Reset DMAy Channelx remaining bytes register */ + DMAy_Channelx->CNDTR = 0; + + /* Reset DMAy Channelx peripheral address register */ + DMAy_Channelx->CPAR = 0; + + /* Reset DMAy Channelx memory address register */ + DMAy_Channelx->CMAR = 0; + + if (DMAy_Channelx == DMA1_Channel1) + { + /* Reset interrupt pending bits for DMA1 Channel1 */ + DMA1->IFCR |= DMA1_CHANNEL1_IT_MASK; + } + else if (DMAy_Channelx == DMA1_Channel2) + { + /* Reset interrupt pending bits for DMA1 Channel2 */ + DMA1->IFCR |= DMA1_CHANNEL2_IT_MASK; + } + else if (DMAy_Channelx == DMA1_Channel3) + { + /* Reset interrupt pending bits for DMA1 Channel3 */ + DMA1->IFCR |= DMA1_CHANNEL3_IT_MASK; + } + else if (DMAy_Channelx == DMA1_Channel4) + { + /* Reset interrupt pending bits for DMA1 Channel4 */ + DMA1->IFCR |= DMA1_CHANNEL4_IT_MASK; + } + else if (DMAy_Channelx == DMA1_Channel5) + { + /* Reset interrupt pending bits for DMA1 Channel5 */ + DMA1->IFCR |= DMA1_CHANNEL5_IT_MASK; + } + else if (DMAy_Channelx == DMA1_Channel6) + { + /* Reset interrupt pending bits for DMA1 Channel6 */ + DMA1->IFCR |= DMA1_CHANNEL6_IT_MASK; + } + else if (DMAy_Channelx == DMA1_Channel7) + { + /* Reset interrupt pending bits for DMA1 Channel7 */ + DMA1->IFCR |= DMA1_CHANNEL7_IT_MASK; + } + else if (DMAy_Channelx == DMA2_Channel1) + { + /* Reset interrupt pending bits for DMA2 Channel1 */ + DMA2->IFCR |= DMA2_CHANNEL1_IT_MASK; + } + else if (DMAy_Channelx == DMA2_Channel2) + { + /* Reset interrupt pending bits for DMA2 Channel2 */ + DMA2->IFCR |= DMA2_CHANNEL2_IT_MASK; + } + else if (DMAy_Channelx == DMA2_Channel3) + { + /* Reset interrupt pending bits for DMA2 Channel3 */ + DMA2->IFCR |= DMA2_CHANNEL3_IT_MASK; + } + else if (DMAy_Channelx == DMA2_Channel4) + { + /* Reset interrupt pending bits for DMA2 Channel4 */ + DMA2->IFCR |= DMA2_CHANNEL4_IT_MASK; + } + else + { + if (DMAy_Channelx == DMA2_Channel5) + { + /* Reset interrupt pending bits for DMA2 Channel5 */ + DMA2->IFCR |= DMA2_CHANNEL5_IT_MASK; + } + } +} + +/** + * @brief Initializes the DMAy Channelx according to the specified parameters + * in the DMA_InitStruct. + * @param DMAy_Channelx: where y can be 1 to select the DMA and x can be 1 to 7 + * for DMA1 to select the DMA Channel and 1 to 5 for DMA2 to select the DMA Channel. + * @note DMA1 Channel 6 and 7 are available only for STM32F072 and STM32F091 devices. + * @note DMA2 Channel 1 to 5 are available only for STM32F091 devices. + * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); + assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); + assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); + assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); + assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); + +/*--------------------------- DMAy Channelx CCR Configuration ----------------*/ + /* Get the DMAy_Channelx CCR value */ + tmpreg = DMAy_Channelx->CCR; + + /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmpreg &= CCR_CLEAR_MASK; + + /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ + /* Set DIR bit according to DMA_DIR value */ + /* Set CIRC bit according to DMA_Mode value */ + /* Set PINC bit according to DMA_PeripheralInc value */ + /* Set MINC bit according to DMA_MemoryInc value */ + /* Set PSIZE bits according to DMA_PeripheralDataSize value */ + /* Set MSIZE bits according to DMA_MemoryDataSize value */ + /* Set PL bits according to DMA_Priority value */ + /* Set the MEM2MEM bit according to DMA_M2M value */ + tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | + DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | + DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | + DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; + + /* Write to DMAy Channelx CCR */ + DMAy_Channelx->CCR = tmpreg; + +/*--------------------------- DMAy Channelx CNDTR Configuration --------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; + +/*--------------------------- DMAy Channelx CPAR Configuration ---------------*/ + /* Write to DMAy Channelx CPAR */ + DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; + +/*--------------------------- DMAy Channelx CMAR Configuration ---------------*/ + /* Write to DMAy Channelx CMAR */ + DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; +} + +/** + * @brief Fills each DMA_InitStruct member with its default value. + * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) +{ +/*-------------- Reset DMA init structure parameters values ------------------*/ + /* Initialize the DMA_PeripheralBaseAddr member */ + DMA_InitStruct->DMA_PeripheralBaseAddr = 0; + /* Initialize the DMA_MemoryBaseAddr member */ + DMA_InitStruct->DMA_MemoryBaseAddr = 0; + /* Initialize the DMA_DIR member */ + DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; + /* Initialize the DMA_BufferSize member */ + DMA_InitStruct->DMA_BufferSize = 0; + /* Initialize the DMA_PeripheralInc member */ + DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; + /* Initialize the DMA_MemoryInc member */ + DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; + /* Initialize the DMA_PeripheralDataSize member */ + DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + /* Initialize the DMA_MemoryDataSize member */ + DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + /* Initialize the DMA_Mode member */ + DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; + /* Initialize the DMA_Priority member */ + DMA_InitStruct->DMA_Priority = DMA_Priority_Low; + /* Initialize the DMA_M2M member */ + DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; +} + +/** + * @brief Enables or disables the specified DMAy Channelx. + * @param DMAy_Channelx: where y can be 1 to select the DMA and x can be 1 to 7 + * for DMA1 to select the DMA Channel and 1 to 5 for DMA2 to select the DMA Channel. + * @note DMA1 Channel 6 and 7 are available only for STM32F072 and STM32F091 devices. + * @note DMA2 Channel 1 to 5 are available only for STM32F091 devices. + * @param NewState: new state of the DMAy Channelx. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DMAy Channelx */ + DMAy_Channelx->CCR |= DMA_CCR_EN; + } + else + { + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR_EN); + } +} + +/** + * @brief Configure the DMAx channels remapping. + * @param DMAy: where x can be 1 or 2 to select the DMA peripheral. + * @param DMAy_CHx_RemapRequest: where y can be 1 or 2 to select the DMA and x can be 1 to 7 + * for DMA1 to select the DMA1 Channel and can be 1 to 5 for DMA2 to select the DMA2 Channel. + * @note This function is available only for STM32F091 devices. + * @retval None + */ +void DMA_RemapConfig(DMA_TypeDef* DMAy, uint32_t DMAx_CHy_RemapRequest) +{ + assert_param(IS_DMA_ALL_LIST(DMAy)); + + if (DMAy == DMA1) + { + assert_param(IS_DMA1_REMAP(DMAx_CHy_RemapRequest)); + } + else + { + assert_param(IS_DMA2_REMAP(DMAx_CHy_RemapRequest)); + } + + DMAy->RMPCR &= ~((uint32_t)0x0F << (uint32_t)((DMAx_CHy_RemapRequest >> 28) * 4)); + DMAy->RMPCR |= (uint32_t)(DMAx_CHy_RemapRequest & 0x0FFFFFFF); +} + +/** + * @} + */ + +/** @defgroup DMA_Group2 Data Counter functions + * @brief Data Counter functions + * +@verbatim + =============================================================================== + ##### Data Counter functions ##### + =============================================================================== + [..] This subsection provides function allowing to configure and read the buffer + size (number of data to be transferred).The DMA data counter can be written + only when the DMA channel is disabled (ie. after transfer complete event). + [..] The following function can be used to write the Channel data counter value: + (+) void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t + DataNumber). + -@- It is advised to use this function rather than DMA_Init() in situations + where only the Data buffer needs to be reloaded. + [..] The DMA data counter can be read to indicate the number of remaining transfers + for the relative DMA channel. This counter is decremented at the end of each + data transfer and when the transfer is complete: + (+) If Normal mode is selected: the counter is set to 0. + (+) If Circular mode is selected: the counter is reloaded with the initial + value(configured before enabling the DMA channel). + [..] The following function can be used to read the Channel data counter value: + (+) uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx). + +@endverbatim + * @{ + */ + +/** + * @brief Sets the number of data units in the current DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 to select the DMA and x can be 1 to 7 + * for DMA1 to select the DMA Channel and 1 to 5 for DMA2 to select the DMA Channel. + * @note DMA1 Channel 6 and 7 are available only for STM32F072 and STM32F091 devices. + * @note DMA2 Channel 1 to 5 are available only for STM32F091 devices. + * @param DataNumber: The number of data units in the current DMAy Channelx + * transfer. + * @note This function can only be used when the DMAy_Channelx is disabled. + * @retval None. + */ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + +/*--------------------------- DMAy Channelx CNDTR Configuration --------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DataNumber; +} + +/** + * @brief Returns the number of remaining data units in the current + * DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 to select the DMA and x can be 1 to 7 + * for DMA1 to select the DMA Channel and 1 to 5 for DMA2 to select the DMA Channel. + * @note DMA1 Channel 6 and 7 are available only for STM32F072 and STM32F091 devices. + * @note DMA2 Channel 1 to 5 are available only for STM32F091 devices. + * @retval The number of remaining data units in the current DMAy Channelx + * transfer. + */ +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + /* Return the number of remaining data units for DMAy Channelx */ + return ((uint16_t)(DMAy_Channelx->CNDTR)); +} + +/** + * @} + */ + +/** @defgroup DMA_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This subsection provides functions allowing to configure the DMA Interrupts + sources and check or clear the flags or pending bits status. + The user should identify which mode will be used in his application to manage + the DMA controller events: Polling mode or Interrupt mode. + *** Polling Mode *** + ==================== + [..] Each DMA channel can be managed through 4 event Flags:(y : DMA Controller + number x : DMA channel number ). + (#) DMAy_FLAG_TCx : to indicate that a Transfer Complete event occurred. + (#) DMAy_FLAG_HTx : to indicate that a Half-Transfer Complete event occurred. + (#) DMAy_FLAG_TEx : to indicate that a Transfer Error occurred. + (#) DMAy_FLAG_GLx : to indicate that at least one of the events described + above occurred. + -@- Clearing DMAy_FLAG_GLx results in clearing all other pending flags of the + same channel (DMAy_FLAG_TCx, DMAy_FLAG_HTx and DMAy_FLAG_TEx). + [..]In this Mode it is advised to use the following functions: + (+) FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG); + (+) void DMA_ClearFlag(uint32_t DMA_FLAG); + + *** Interrupt Mode *** + ====================== + [..] Each DMA channel can be managed through 4 Interrupts: + (+) Interrupt Source + (##) DMA_IT_TC: specifies the interrupt source for the Transfer Complete + event. + (##) DMA_IT_HT : specifies the interrupt source for the Half-transfer Complete + event. + (##) DMA_IT_TE : specifies the interrupt source for the transfer errors event. + (##) DMA_IT_GL : to indicate that at least one of the interrupts described + above occurred. + -@@- Clearing DMA_IT_GL interrupt results in clearing all other interrupts of + the same channel (DMA_IT_TCx, DMA_IT_HT and DMA_IT_TE). + [..]In this Mode it is advised to use the following functions: + (+) void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, + FunctionalState NewState); + (+) ITStatus DMA_GetITStatus(uint32_t DMA_IT); + (+) void DMA_ClearITPendingBit(uint32_t DMA_IT); + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified DMAy Channelx interrupts. + * @param DMAy_Channelx: where y can be 1 to select the DMA and x can be 1 to 7 + * for DMA1 to select the DMA Channel and 1 to 5 for DMA2 to select the DMA Channel. + * @note DMA1 Channel 6 and 7 are available only for STM32F072 and STM32F091 devices. + * @note DMA2 Channel 1 to 5 are available only for STM32F091 devices. + * @param DMA_IT: specifies the DMA interrupts sources to be enabled + * or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @param NewState: new state of the specified DMA interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_CONFIG_IT(DMA_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DMA interrupts */ + DMAy_Channelx->CCR |= DMA_IT; + } + else + { + /* Disable the selected DMA interrupts */ + DMAy_Channelx->CCR &= ~DMA_IT; + } +} + +/** + * @brief Checks whether the specified DMAy Channelx flag is set or not. + * @param DMA_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag, applicable only for STM32FO91 devices. + * @note The Global flag (DMAy_FLAG_GLx) is set whenever any of the other flags + * relative to the same channel is set (Transfer Complete, Half-transfer + * Complete or Transfer Error flags: DMAy_FLAG_TCx, DMAy_FLAG_HTx or + * DMAy_FLAG_TEx). + * + * @retval The new state of DMA_FLAG (SET or RESET). + */ +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR ; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR ; + } + + /* Check the status of the specified DMAy flag */ + if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET) + { + /* DMAy_FLAG is set */ + bitstatus = SET; + } + else + { + /* DMAy_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the DMAy_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's pending flags. + * @param DMA_FLAG: specifies the flag to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag, applicable only for STM32FO91 devices. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag, applicable only for STM32FO91 devices. + * + * @note Clearing the Global flag (DMAy_FLAG_GLx) results in clearing all other flags + * relative to the same channel (Transfer Complete, Half-transfer Complete and + * Transfer Error flags: DMAy_FLAG_TCx, DMAy_FLAG_HTx and DMAy_FLAG_TEx). + * + * @retval None + */ +void DMA_ClearFlag(uint32_t DMAy_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG)); + +/* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy flags */ + DMA2->IFCR = DMAy_FLAG; + } + else + { + /* Clear the selected DMAy flags */ + DMA1->IFCR = DMAy_FLAG; + } +} + +/** + * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not. + * @param DMA_IT: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt, applicable only for STM32FO91 devices. + * @note The Global interrupt (DMAy_FLAG_GLx) is set whenever any of the other + * interrupts relative to the same channel is set (Transfer Complete, + * Half-transfer Complete or Transfer Error interrupts: DMAy_IT_TCx, + * DMAy_IT_HTx or DMAy_IT_TEx). + * + * @retval The new state of DMA_IT (SET or RESET). + */ +ITStatus DMA_GetITStatus(uint32_t DMAy_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_IT(DMAy_IT)); + + /* Calculate the used DMA */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR; + } + + /* Check the status of the specified DMAy interrupt */ + if ((tmpreg & DMAy_IT) != (uint32_t)RESET) + { + /* DMAy_IT is set */ + bitstatus = SET; + } + else + { + /* DMAy_IT is reset */ + bitstatus = RESET; + } + /* Return the DMAy_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's interrupt pending bits. + * @param DMA_IT: specifies the DMA interrupt pending bit to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt, applicable only for STM32F072 and STM32FO91 devices. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt, applicable only for STM32FO91 devices. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt, applicable only for STM32FO91 devices. + * + * @note Clearing the Global interrupt (DMAy_IT_GLx) results in clearing all other + * interrupts relative to the same channel (Transfer Complete, Half-transfer + * Complete and Transfer Error interrupts: DMAy_IT_TCx, DMAy_IT_HTx and + * DMAy_IT_TEx). + * + * @retval None + */ +void DMA_ClearITPendingBit(uint32_t DMAy_IT) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_IT(DMAy_IT)); + + /* Calculate the used DMAy */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy interrupt pending bits */ + DMA2->IFCR = DMAy_IT; + } + else + { + /* Clear the selected DMAy interrupt pending bits */ + DMA1->IFCR = DMAy_IT; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_exti.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_exti.c new file mode 100644 index 0000000..8f392c1 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_exti.c @@ -0,0 +1,306 @@ +/** + ****************************************************************************** + * @file stm32f0xx_exti.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the EXTI peripheral: + * + Initialization and Configuration + * + Interrupts and flags management + * + * @verbatim + ============================================================================== + ##### EXTI features ##### + ============================================================================== + [..] External interrupt/event lines are mapped as following: + (#) All available GPIO pins are connected to the 16 external + interrupt/event lines from EXTI0 to EXTI15. + (#) EXTI line 16 is connected to the PVD output, not applicable for STM32F030 devices. + (#) EXTI line 17 is connected to the RTC Alarm event. + (#) EXTI line 18 is connected to the RTC Alarm event, applicable only for STM32F072 devices. + (#) EXTI line 19 is connected to the RTC Tamper and TimeStamp events. + (#) EXTI line 20 is connected to the RTC wakeup event, applicable only for STM32F072 devices. + (#) EXTI line 21 is connected to the Comparator 1 wakeup event, applicable only for STM32F051 and STM32F072 devices. + (#) EXTI line 22 is connected to the Comparator 2 wakeup event, applicable only for STM32F051 and STM32F072 devices. + (#) EXTI line 23 is connected to the I2C1 wakeup event, not applicable for STM32F030 devices. + (#) EXTI line 25 is connected to the USART1 wakeup event, not applicable for STM32F030 devices. + (#) EXTI line 26 is connected to the USART2 wakeup event, applicable only for STM32F072 devices. + (#) EXTI line 27 is connected to the CEC wakeup event, applicable only for STM32F051 and STM32F072 devices. + (#) EXTI line 31 is connected to the VDD USB monitor event, applicable only for STM32F072 devices. + + ##### How to use this driver ##### + ============================================================================== + [..] In order to use an I/O pin as an external interrupt source, follow + steps below: + (#) Configure the I/O in input mode using GPIO_Init() + (#) Select the input source pin for the EXTI line using + SYSCFG_EXTILineConfig(). + (#) Select the mode(interrupt, event) and configure the trigger selection + (Rising, falling or both) using EXTI_Init(). For the internal interrupt, + the trigger selection is not needed( the active edge is always the rising one). + (#) Configure NVIC IRQ channel mapped to the EXTI line using NVIC_Init(). + (#) Optionally, you can generate a software interrupt using the function EXTI_GenerateSWInterrupt(). + [..] + (@) SYSCFG APB clock must be enabled to get write access to SYSCFG_EXTICRx + registers using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_exti.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup EXTI + * @brief EXTI driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup EXTI_Private_Functions + * @{ + */ + +/** @defgroup EXTI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the EXTI peripheral registers to their default reset + * values. + * @param None + * @retval None + */ +void EXTI_DeInit(void) +{ + EXTI->IMR = 0x0F940000; + EXTI->EMR = 0x00000000; + EXTI->RTSR = 0x00000000; + EXTI->FTSR = 0x00000000; + EXTI->PR = 0x006BFFFF; +} + +/** + * @brief Initializes the EXTI peripheral according to the specified + * parameters in the EXTI_InitStruct. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure that + * contains the configuration information for the EXTI peripheral. + * @retval None + */ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); + assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); + assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); + + tmp = (uint32_t)EXTI_BASE; + + if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; + + tmp += EXTI_InitStruct->EXTI_Mode; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; + + /* Select the trigger for the selected interrupts */ + if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) + { + /* Rising Falling edge */ + EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; + EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; + } + else + { + tmp = (uint32_t)EXTI_BASE; + tmp += EXTI_InitStruct->EXTI_Trigger; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + } + } + else + { + tmp += EXTI_InitStruct->EXTI_Mode; + + /* Disable the selected external lines */ + *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; + } +} + +/** + * @brief Fills each EXTI_InitStruct member with its reset value. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) +{ + EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; + EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStruct->EXTI_LineCmd = DISABLE; +} + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param EXTI_Line: specifies the EXTI line on which the software interrupt + * will be generated. + * This parameter can be any combination of EXTI_Linex where x can be (0..27). + * @retval None + */ +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->SWIER |= EXTI_Line; +} + +/** + * @} + */ + +/** @defgroup EXTI_Group2 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + ============================================================================== + ##### Interrupts and flags management functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param EXTI_Line: specifies the EXTI line flag to check. + * This parameter can be EXTI_Linex where x can be (0..27). + * @retval The new state of EXTI_Line (SET or RESET). + */ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending flags. + * @param EXTI_Line: specifies the EXTI lines flags to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..27). + * @retval None + */ +void EXTI_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param EXTI_Line: specifies the EXTI line to check. + * This parameter can be EXTI_Linex where x can be (0..27). + * @retval The new state of EXTI_Line (SET or RESET). + */ +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending bits. + * @param EXTI_Line: specifies the EXTI lines to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..27). + * @retval None + */ +void EXTI_ClearITPendingBit(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_flash.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_flash.c new file mode 100644 index 0000000..ced8c53 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_flash.c @@ -0,0 +1,1248 @@ +/** + ****************************************************************************** + * @file stm32f0xx_flash.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the FLASH peripheral: + * - FLASH Interface configuration + * - FLASH Memory Programming + * - Option Bytes Programming + * - Interrupts and flags management + * + * @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] This driver provides functions to configure and program the Flash + memory of all STM32F0xx devices. These functions are split in 4 groups + (#) FLASH Interface configuration functions: this group includes the + management of following features: + (++) Set the latency + (++) Enable/Disable the prefetch buffer + + (#) FLASH Memory Programming functions: this group includes all needed + functions to erase and program the main memory: + (++) Lock and Unlock the Flash interface. + (++) Erase function: Erase Page, erase all pages. + (++) Program functions: Half Word and Word write. + + (#) FLASH Option Bytes Programming functions: this group includes all + needed functions to: + (++) Lock and Unlock the Flash Option bytes. + (++) Launch the Option Bytes loader + (++) Erase the Option Bytes + (++)Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user option Bytes + (++) Set/Reset the BOOT1 bit + (++) Enable/Disable the VDDA Analog Monitoring + (++) Get the user option bytes + (++) Get the Write protection + (++) Get the read protection status + + (#) FLASH Interrupts and flag management functions: this group includes + all needed functions to: + (++) Enable/Disable the flash interrupt sources + (++) Get flags status + (++) Clear flags + (++) Get Flash operation status + (++) Wait for last flash operation + + @endverbatim + + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_flash.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FLASH_Private_Functions + * @{ + */ + +/** @defgroup FLASH_Group1 FLASH Interface configuration functions + * @brief FLASH Interface configuration functions + * +@verbatim + =============================================================================== + ##### FLASH Interface configuration functions ##### + =============================================================================== + + [..] FLASH_Interface configuration_Functions, includes the following functions: + (+) void FLASH_SetLatency(uint32_t FLASH_Latency): + [..] To correctly read data from Flash memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock (HCLK) + [..] + +--------------------------------------------- + + | Wait states | HCLK clock frequency (MHz) | + |---------------|------------------------------| + |0WS(1CPU cycle)| 0 < HCLK <= 24 | + |---------------|------------------------------| + |1WS(2CPU cycle)| 24 < HCLK <= 48 | + +----------------------------------------------+ + [..] + (+) void FLASH_PrefetchBufferCmd(FunctionalState NewState); + [..] + All these functions don't need the unlock sequence. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the code latency value. + * @param FLASH_Latency: specifies the FLASH Latency value. + * This parameter can be one of the following values: + * @arg FLASH_Latency_0: FLASH Zero Latency cycle + * @arg FLASH_Latency_1: FLASH One Latency cycle + * @retval None + */ +void FLASH_SetLatency(uint32_t FLASH_Latency) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_LATENCY(FLASH_Latency)); + + /* Read the ACR register */ + tmpreg = FLASH->ACR; + + /* Sets the Latency value */ + tmpreg &= (uint32_t) (~((uint32_t)FLASH_ACR_LATENCY)); + tmpreg |= FLASH_Latency; + + /* Write the ACR register */ + FLASH->ACR = tmpreg; +} + +/** + * @brief Enables or disables the Prefetch Buffer. + * @param NewState: new state of the FLASH prefetch buffer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_PrefetchBufferCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + FLASH->ACR |= FLASH_ACR_PRFTBE; + } + else + { + FLASH->ACR &= (uint32_t)(~((uint32_t)FLASH_ACR_PRFTBE)); + } +} + +/** + * @brief Checks whether the FLASH Prefetch Buffer status is set or not. + * @param None + * @retval FLASH Prefetch Buffer Status (SET or RESET). + */ +FlagStatus FLASH_GetPrefetchBufferStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((FLASH->ACR & FLASH_ACR_PRFTBS) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ + return bitstatus; +} + +/** + * @} + */ + +/** @defgroup FLASH_Group2 FLASH Memory Programming functions + * @brief FLASH Memory Programming functions + * +@verbatim + =============================================================================== + ##### FLASH Memory Programming functions ##### + =============================================================================== + + [..] The FLASH Memory Programming functions, includes the following functions: + (+) void FLASH_Unlock(void); + (+) void FLASH_Lock(void); + (+) FLASH_Status FLASH_ErasePage(uint32_t Page_Address); + (+) FLASH_Status FLASH_EraseAllPages(void); + (+) FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); + (+) FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); + + [..] Any operation of erase or program should follow these steps: + + (#) Call the FLASH_Unlock() function to enable the flash control register and + program memory access + (#) Call the desired function to erase page or program data + (#) Call the FLASH_Lock() to disable the flash program memory access + (recommended to protect the FLASH memory against possible unwanted operation) + +@endverbatim + * @{ + */ + +/** + * @brief Unlocks the FLASH control register and program memory access. + * @param None + * @retval None + */ +void FLASH_Unlock(void) +{ + if((FLASH->CR & FLASH_CR_LOCK) != RESET) + { + /* Unlocking the program memory access */ + FLASH->KEYR = FLASH_FKEY1; + FLASH->KEYR = FLASH_FKEY2; + } +} + +/** + * @brief Locks the Program memory access. + * @param None + * @retval None + */ +void FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH control register and program memory access */ + FLASH->CR |= FLASH_CR_LOCK; +} + +/** + * @brief Erases a specified page in program memory. + * @note To correctly run this function, the FLASH_Unlock() function must be called before. + * @note Call the FLASH_Lock() to disable the flash memory access (recommended + * to protect the FLASH memory against possible unwanted operation) + * @param Page_Address: The page address in program memory to be erased. + * @note A Page is erased in the Program memory only if the address to load + * is the start address of a page (multiple of 1024 bytes). + * @retval FLASH Status: The returned value can be: + * FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Page_Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the previous operation is completed, proceed to erase the page */ + FLASH->CR |= FLASH_CR_PER; + FLASH->AR = Page_Address; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + /* Disable the PER Bit */ + FLASH->CR &= ~FLASH_CR_PER; + } + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all FLASH pages. + * @note To correctly run this function, the FLASH_Unlock() function must be called before. + * @note Call the FLASH_Lock() to disable the flash memory access (recommended + * to protect the FLASH memory against possible unwanted operation) + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllPages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= FLASH_CR_MER; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + /* Disable the MER Bit */ + FLASH->CR &= ~FLASH_CR_MER; + } + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Programs a word at a specified address. + * @note To correctly run this function, the FLASH_Unlock() function must be called before. + * @note Call the FLASH_Lock() to disable the flash memory access (recommended + * to protect the FLASH memory against possible unwanted operation) + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint16_t*)Address = (uint16_t)Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + /* Disable the PG Bit */ + FLASH->CR &= ~FLASH_CR_PG; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= ~FLASH_CR_PG; + } + } + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @note To correctly run this function, the FLASH_Unlock() function must be called before. + * @note Call the FLASH_Lock() to disable the flash memory access (recommended + * to protect the FLASH memory against possible unwanted operation) + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the previous operation is completed, proceed to program the new data */ + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + /* Disable the PG Bit */ + FLASH->CR &= ~FLASH_CR_PG; + } + + /* Return the Program Status */ + return status; +} + +/** + * @} + */ + +/** @defgroup FLASH_Group3 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + =============================================================================== + ##### Option Bytes Programming functions ##### + =============================================================================== + + [..] The FLASH_Option Bytes Programming_functions, includes the following functions: + (+) void FLASH_OB_Unlock(void); + (+) void FLASH_OB_Lock(void); + (+) void FLASH_OB_Launch(void); + (+) FLASH_Status FLASH_OB_Erase(void); + (+) FLASH_Status FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState); + (+) FLASH_Status FLASH_OB_RDPConfig(uint8_t OB_RDP); + (+) FLASH_Status FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY); + (+) FLASH_Status FLASH_OB_BOOTConfig(uint8_t OB_BOOT1); + (+) FLASH_Status FLASH_OB_VDDAConfig(uint8_t OB_VDDA_ANALOG); + (+) FLASH_Status FLASH_OB_WriteUser(uint8_t OB_USER); + (+) FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); + (+) uint8_t FLASH_OB_GetUser(void); + (+) uint32_t FLASH_OB_GetWRP(void); + (+) FlagStatus FLASH_OB_GetRDP(void); + + [..] Any operation of erase or program should follow these steps: + + (#) Call the FLASH_OB_Unlock() function to enable the Option Bytes registers access + + (#) Call one or several functions to program the desired option bytes + (++) FLASH_Status FLASH_OB_RDPConfig(uint8_t OB_RDP) => to set the desired read Protection Level + (++) FLASH_Status FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) + => to Enable/Disable the desired sector write protection + (++) FLASH_Status FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) + => to configure the user option Bytes: IWDG, STOP and the Standby. + (++) FLASH_Status FLASH_OB_BOOTConfig(uint8_t OB_BOOT1) + => to set or reset BOOT1 + (++) FLASH_Status FLASH_OB_VDDAConfig(uint8_t OB_VDDA_ANALOG) + => to enable or disable the VDDA Analog Monitoring + (++) You can write all User Options bytes at once using a single function + by calling FLASH_Status FLASH_OB_WriteUser(uint8_t OB_USER) + (++) FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) to program the + two half word in the option bytes + + (#) Once all needed option bytes to be programmed are correctly written, call the + FLASH_OB_Launch(void) function to launch the Option Bytes programming process. + + (#) Call the FLASH_OB_Lock() to disable the Option Bytes registers access (recommended + to protect the option Bytes against possible unwanted operations) + +@endverbatim + * @{ + */ + +/** + * @brief Unlocks the option bytes block access. + * @param None + * @retval None + */ +void FLASH_OB_Unlock(void) +{ + if((FLASH->CR & FLASH_CR_OPTWRE) == RESET) + { + /* Unlocking the option bytes block access */ + FLASH->OPTKEYR = FLASH_OPTKEY1; + FLASH->OPTKEYR = FLASH_OPTKEY2; + } +} + +/** + * @brief Locks the option bytes block access. + * @param None + * @retval None + */ +void FLASH_OB_Lock(void) +{ + /* Set the OPTWREN Bit to lock the option bytes block access */ + FLASH->CR &= ~FLASH_CR_OPTWRE; +} + +/** + * @brief Launch the option byte loading. + * @param None + * @retval None + */ +void FLASH_OB_Launch(void) +{ + /* Set the OBL_Launch bit to launch the option byte loading */ + FLASH->CR |= FLASH_CR_OBL_LAUNCH; +} + +/** + * @brief Erases the FLASH option bytes. + * @note To correctly run this function, the FLASH_OB_Unlock() function must be called before. + * @note Call the FLASH_OB_Lock() to disable the flash control register access and the option + * bytes (recommended to protect the FLASH memory against possible unwanted operation) + * @note This functions erases all option bytes except the Read protection (RDP). + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_OB_Erase(void) +{ + uint16_t rdptmp = OB_RDP_Level_0; + + FLASH_Status status = FLASH_COMPLETE; + + /* Get the actual read protection Option Byte value */ + if(FLASH_OB_GetRDP() != RESET) + { + rdptmp = 0x00; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the previous operation is completed, proceed to erase the option bytes */ + FLASH->CR |= FLASH_CR_OPTER; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= ~FLASH_CR_OPTER; + + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + /* Restore the last read protection Option Byte value */ + OB->RDP = (uint16_t)rdptmp; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + else + { + if (status != FLASH_TIMEOUT) + { + /* Disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + } + /* Return the erase status */ + return status; +} + +/** + * @brief Write protects the desired pages + * @note To correctly run this function, the FLASH_OB_Unlock() function must be called before. + * @note Call the FLASH_OB_Lock() to disable the flash control register access and the option + * bytes (recommended to protect the FLASH memory against possible unwanted operation) + * @param OB_WRP: specifies the address of the pages to be write protected. + * This parameter can be: + * @arg OB_WRP_Pages0to3..OB_WRP_Pages60to63 + * @arg OB_WRP_AllPages + * @retval FLASH Status: The returned value can be: + * FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_OB_EnableWRP(uint32_t OB_WRP) +{ + uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; + + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_WRP(OB_WRP)); + + OB_WRP = (uint32_t)(~OB_WRP); + WRP0_Data = (uint16_t)(OB_WRP & OB_WRP0_WRP0); + WRP1_Data = (uint16_t)((OB_WRP >> 8) & OB_WRP0_WRP0); + WRP2_Data = (uint16_t)((OB_WRP >> 16) & OB_WRP0_WRP0) ; + WRP3_Data = (uint16_t)((OB_WRP >> 24) & OB_WRP0_WRP0) ; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + FLASH->CR |= FLASH_CR_OPTPG; + + if(WRP0_Data != 0xFF) + { + OB->WRP0 = WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + } + if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) + { + OB->WRP1 = WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + } + if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) + { + OB->WRP2 = WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + } + if((status == FLASH_COMPLETE) && (WRP3_Data != 0xFF)) + { + OB->WRP3 = WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + } + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the write protection operation Status */ + return status; +} + +/** + * @brief Enables or disables the read out protection. + * @note To correctly run this function, the FLASH_OB_Unlock() function must be called before. + * @note Call the FLASH_OB_Lock() to disable the flash control register access and the option + * bytes (recommended to protect the FLASH memory against possible unwanted operation) + * @param FLASH_ReadProtection_Level: specifies the read protection level. + * This parameter can be: + * @arg OB_RDP_Level_0: No protection + * @arg OB_RDP_Level_1: Read protection of the memory + * @arg OB_RDP_Level_2: Chip protection + * @note When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 + * @retval FLASH Status: The returned value can be: + * FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_OB_RDPConfig(uint8_t OB_RDP) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_RDP(OB_RDP)); + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + FLASH->CR |= FLASH_CR_OPTER; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* If the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= ~FLASH_CR_OPTER; + + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->RDP = OB_RDP; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + else + { + if(status != FLASH_TIMEOUT) + { + /* Disable the OPTER Bit */ + FLASH->CR &= ~FLASH_CR_OPTER; + } + } + } + /* Return the protection operation Status */ + return status; +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @note To correctly run this function, the FLASH_OB_Unlock() function must be called before. + * @note Call the FLASH_OB_Lock() to disable the flash control register access and the option + * bytes (recommended to protect the FLASH memory against possible unwanted operation) + * @param OB_IWDG: Selects the WDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software WDG selected + * @arg OB_IWDG_HW: Hardware WDG selected + * @param OB_STOP: Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NoRST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param OB_STDBY: Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval FLASH Status: The returned value can be: + * FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = (uint16_t)((uint16_t)(OB_IWDG | OB_STOP) | (uint16_t)(OB_STDBY | 0xF8)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* If the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; +} + +/** + * @brief Sets or resets the BOOT1 option bit. + * @param OB_BOOT1: Set or Reset the BOOT1 option bit. + * This parameter can be one of the following values: + * @arg OB_BOOT1_RESET: BOOT1 option bit reset + * @arg OB_BOOT1_SET: BOOT1 option bit set + * @retval None + */ +FLASH_Status FLASH_OB_BOOTConfig(uint8_t OB_BOOT1) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_BOOT1(OB_BOOT1)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = OB_BOOT1 | 0xEF; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* If the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; +} + +/** + * @brief Sets or resets the BOOT0 option bit. + * @note This function is applicable only for the STM32F042 devices. + * @param OB_BOOT0: Set or Reset the BOOT0 option bit. + * This parameter can be one of the following values: + * @arg OB_BOOT0_RESET: BOOT0 option bit reset + * @arg OB_BOOT0_SET: BOOT0 option bit set + * @retval None + */ +FLASH_Status FLASH_OB_BOOT0Config(uint8_t OB_BOOT0) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_BOOT0(OB_BOOT0)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = OB_BOOT0 | 0xF7; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* If the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; +} + +/** + * @brief Sets or resets the BOOT0SW option bit. + * @note This function is applicable only for the STM32F042 devices. + * @param OB_BOOT0SW: Set or Reset the BOOT0_SW option bit. + * This parameter can be one of the following values: + * @arg OB_BOOT0_SW: BOOT0_SW option bit reset + * @arg OB_BOOT0_HW: BOOT0_SW option bit set + * @retval None + */ +FLASH_Status FLASH_OB_BOOT0SWConfig(uint8_t OB_BOOT0SW) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_BOOT0SW(OB_BOOT0SW)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = OB_BOOT0SW | 0x7F; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* If the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; +} + +/** + * @brief Sets or resets the analogue monitoring on VDDA Power source. + * @param OB_VDDA_ANALOG: Selects the analog monitoring on VDDA Power source. + * This parameter can be one of the following values: + * @arg OB_VDDA_ANALOG_ON: Analog monitoring on VDDA Power source ON + * @arg OB_VDDA_ANALOG_OFF: Analog monitoring on VDDA Power source OFF + * @retval None + */ +FLASH_Status FLASH_OB_VDDAConfig(uint8_t OB_VDDA_ANALOG) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_VDDA_ANALOG(OB_VDDA_ANALOG)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = OB_VDDA_ANALOG | 0xDF; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; +} + +/** + * @brief Sets or resets the SRAM parity. + * @param OB_SRAM_Parity: Set or Reset the SRAM parity enable bit. + * This parameter can be one of the following values: + * @arg OB_SRAM_PARITY_SET: Set SRAM parity. + * @arg OB_SRAM_PARITY_RESET: Reset SRAM parity. + * @retval None + */ +FLASH_Status FLASH_OB_SRAMParityConfig(uint8_t OB_SRAM_Parity) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_SRAM_PARITY(OB_SRAM_Parity)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = OB_SRAM_Parity | 0xBF; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW, RST_STOP, RST_STDBY, + * BOOT1 and VDDA ANALOG monitoring. + * @note To correctly run this function, the FLASH_OB_Unlock() function must be called before. + * @note Call the FLASH_OB_Lock() to disable the flash control register access and the option + * bytes (recommended to protect the FLASH memory against possible unwanted operation) + * @param OB_USER: Selects all user option bytes + * This parameter is a combination of the following values: + * @arg OB_IWDG_SW / OB_IWDG_HW: Software / Hardware WDG selected + * @arg OB_STOP_NoRST / OB_STOP_RST: No reset / Reset generated when entering in STOP + * @arg OB_STDBY_NoRST / OB_STDBY_RST: No reset / Reset generated when entering in STANDBY + * @arg OB_BOOT1_RESET / OB_BOOT1_SET: BOOT1 Reset / Set + * @arg OB_VDDA_ANALOG_ON / OB_VDDA_ANALOG_OFF: Analog monitoring on VDDA Power source ON / OFF + * @arg OB_SRAM_PARITY_SET / OB_SRAM_PARITY_RESET: SRAM Parity SET / RESET + * @arg OB_BOOT0_RESET / OB_BOOT0_SET: BOOT0 Reset / Set + * @arg OB_BOOT0_SW / OB_BOOT0_SW: BOOT0 pin disabled / BOOT0 pin bonded with GPIO + * @retval FLASH Status: The returned value can be: + * FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_OB_WriteUser(uint8_t OB_USER) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + + OB->USER = OB_USER; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* If the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte program Status */ + return status; + +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note To correctly run this function, the FLASH_OB_Unlock() function must be called before. + * @note Call the FLASH_OB_Lock() to disable the flash control register access and the option + * bytes (recommended to protect the FLASH memory against possible unwanted operation) + * @param Address: specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status == FLASH_COMPLETE) + { + /* Enables the Option Bytes Programming operation */ + FLASH->CR |= FLASH_CR_OPTPG; + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT); + + if(status != FLASH_TIMEOUT) + { + /* If the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= ~FLASH_CR_OPTPG; + } + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Returns the FLASH User Option Bytes values. + * @param None + * @retval The FLASH User Option Bytes . + */ +uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)(FLASH->OBR >> 8); +} + +/** + * @brief Returns the FLASH Write Protection Option Bytes value. + * @param None + * @retval The FLASH Write Protection Option Bytes value + */ +uint32_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (uint32_t)(FLASH->WRPR); +} + +/** + * @brief Checks whether the FLASH Read out Protection Status is set or not. + * @param None + * @retval FLASH ReadOut Protection Status(SET or RESET) + */ +FlagStatus FLASH_OB_GetRDP(void) +{ + FlagStatus readstatus = RESET; + + if ((uint8_t)(FLASH->OBR & (FLASH_OBR_RDPRT1 | FLASH_OBR_RDPRT2)) != RESET) + { + readstatus = SET; + } + else + { + readstatus = RESET; + } + return readstatus; +} + +/** + * @} + */ + +/** @defgroup FLASH_Group4 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or + * disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: FLASH end of programming Interrupt + * @arg FLASH_IT_ERR: FLASH Error Interrupt + * @retval None + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } +} + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @param FLASH_FLAG: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag + * @arg FLASH_FLAG_PGERR: FLASH Programming error flag flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Programming flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)); + + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH_FLAG (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Clears the FLASH's pending flags. + * @param FLASH_FLAG: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_PGERR: FLASH Programming error flag flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Programming flag + * @retval None + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)); + + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; +} + +/** + * @brief Returns the FLASH Status. + * @param None + * @retval FLASH Status: The returned value can be: + * FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP or FLASH_COMPLETE. + */ +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status FLASHstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + FLASHstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & (uint32_t)FLASH_FLAG_WRPERR)!= (uint32_t)0x00) + { + FLASHstatus = FLASH_ERROR_WRP; + } + else + { + if((FLASH->SR & (uint32_t)(FLASH_SR_PGERR)) != (uint32_t)0x00) + { + FLASHstatus = FLASH_ERROR_PROGRAM; + } + else + { + FLASHstatus = FLASH_COMPLETE; + } + } + } + /* Return the FLASH Status */ + return FLASHstatus; +} + + +/** + * @brief Waits for a FLASH operation to complete or a TIMEOUT to occur. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_BUSY, + * FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the FLASH Status */ + status = FLASH_GetStatus(); + + /* Wait for a FLASH operation to complete or a TIMEOUT to occur */ + while((status == FLASH_BUSY) && (Timeout != 0x00)) + { + status = FLASH_GetStatus(); + Timeout--; + } + + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + + /** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_gpio.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_gpio.c new file mode 100644 index 0000000..1002e78 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_gpio.c @@ -0,0 +1,534 @@ +/** + ****************************************************************************** + * @file stm32f0xx_gpio.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the GPIO peripheral: + * + Initialization and Configuration functions + * + GPIO Read and Write functions + * + GPIO Alternate functions configuration functions + * + * @verbatim + * + * + =========================================================================== + ##### How to use this driver ##### + =========================================================================== + [..] + (#) Enable the GPIO AHB clock using RCC_AHBPeriphClockCmd() + (#) Configure the GPIO pin(s) using GPIO_Init() + Four possible configuration are available for each pin: + (++) Input: Floating, Pull-up, Pull-down. + (++) Output: Push-Pull (Pull-up, Pull-down or no Pull) + Open Drain (Pull-up, Pull-down or no Pull). + In output mode, the speed is configurable: Low, Medium, Fast or High. + (++) Alternate Function: Push-Pull (Pull-up, Pull-down or no Pull) + Open Drain (Pull-up, Pull-down or no Pull). + (++) Analog: required mode when a pin is to be used as ADC channel, + DAC output or comparator input. + (#) Peripherals alternate function: + (++) For ADC, DAC and comparators, configure the desired pin in analog + mode using GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AN + (++) For other peripherals (TIM, USART...): + (+++) Connect the pin to the desired peripherals' Alternate + Function (AF) using GPIO_PinAFConfig() function. For PortC, + PortD and PortF, no configuration is needed. + (+++) Configure the desired pin in alternate function mode using + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + (+++) Select the type, pull-up/pull-down and output speed via + GPIO_PuPd, GPIO_OType and GPIO_Speed members + (+++) Call GPIO_Init() function + (#) To get the level of a pin configured in input mode use GPIO_ReadInputDataBit() + (#) To set/reset the level of a pin configured in output mode use + GPIO_SetBits()/GPIO_ResetBits() + (#) During and just after reset, the alternate functions are not active and + the GPIO pins are configured in input floating mode (except JTAG pins). + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as + general-purpose (PC14 and PC15, respectively) when the LSE oscillator + is off. The LSE has priority over the GPIO function. + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as general-purpose + PD0 and PD1, respectively, when the HSE oscillator is off. The HSE has + priority over the GPIO function. + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_gpio.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup GPIO_Private_Functions + * @{ + */ + +/** @defgroup GPIO_Group1 Initialization and Configuration + * @brief Initialization and Configuration + * +@verbatim + =============================================================================== + ##### Initialization and Configuration ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the GPIOx peripheral registers to their default reset + * values. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @retval None + */ +void GPIO_DeInit(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + if(GPIOx == GPIOA) + { + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOA, ENABLE); + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOA, DISABLE); + } + else if(GPIOx == GPIOB) + { + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOB, ENABLE); + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOB, DISABLE); + } + else if(GPIOx == GPIOC) + { + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOC, ENABLE); + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOC, DISABLE); + } + else if(GPIOx == GPIOD) + { + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOD, ENABLE); + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOD, DISABLE); + } + else if(GPIOx == GPIOE) + { + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOE, ENABLE); + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOE, DISABLE); + } + else + { + if(GPIOx == GPIOF) + { + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOF, ENABLE); + RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOF, DISABLE); + } + } +} + +/** + * @brief Initializes the GPIOx peripheral according to the specified + * parameters in the GPIO_InitStruct. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) +{ + uint32_t pinpos = 0x00, pos = 0x00 , currentpin = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); + assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); + assert_param(IS_GPIO_PUPD(GPIO_InitStruct->GPIO_PuPd)); + + /*-------------------------- Configure the port pins -----------------------*/ + /*-- GPIO Mode Configuration --*/ + for (pinpos = 0x00; pinpos < 0x10; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + + /* Get the port pins position */ + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + + if (currentpin == pos) + { + if ((GPIO_InitStruct->GPIO_Mode == GPIO_Mode_OUT) || (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_AF)) + { + /* Check Speed mode parameters */ + assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); + + /* Speed mode configuration */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (pinpos * 2)); + GPIOx->OSPEEDR |= ((uint32_t)(GPIO_InitStruct->GPIO_Speed) << (pinpos * 2)); + + /* Check Output mode parameters */ + assert_param(IS_GPIO_OTYPE(GPIO_InitStruct->GPIO_OType)); + + /* Output mode configuration */ + GPIOx->OTYPER &= ~((GPIO_OTYPER_OT_0) << ((uint16_t)pinpos)); + GPIOx->OTYPER |= (uint16_t)(((uint16_t)GPIO_InitStruct->GPIO_OType) << ((uint16_t)pinpos)); + } + + GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (pinpos * 2)); + + GPIOx->MODER |= (((uint32_t)GPIO_InitStruct->GPIO_Mode) << (pinpos * 2)); + + /* Pull-up Pull down resistor configuration */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << ((uint16_t)pinpos * 2)); + GPIOx->PUPDR |= (((uint32_t)GPIO_InitStruct->GPIO_PuPd) << (pinpos * 2)); + } + } +} + +/** + * @brief Fills each GPIO_InitStruct member with its default value. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_Level_2; + GPIO_InitStruct->GPIO_OType = GPIO_OType_PP; + GPIO_InitStruct->GPIO_PuPd = GPIO_PuPd_NOPULL; +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next device reset. + * @param GPIOx: where x can be (A or B) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = 0x00010000; + + /* Check the parameters */ + assert_param(IS_GPIO_LIST_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + tmp |= GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Reset LCKK bit */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Read LCKK bit */ + tmp = GPIOx->LCKR; + /* Read LCKK bit */ + tmp = GPIOx->LCKR; +} + +/** + * @} + */ + +/** @defgroup GPIO_Group2 GPIO Read and Write + * @brief GPIO Read and Write + * +@verbatim + =============================================================================== + ##### GPIO Read and Write ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param GPIO_Pin: specifies the port bit to read. + * @note This parameter can be GPIO_Pin_x where x can be: + * For STM32F051 and STM32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF. + * For STM32F072: (0..15) for GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, (0..10) for GPIOF. + * For STM32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF. + * @retval The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @retval The input port pin value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->IDR); +} + +/** + * @brief Reads the specified output data port bit. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param GPIO_Pin: Specifies the port bit to read. + * @note This parameter can be GPIO_Pin_x where x can be: + * For STM32F051 and STM32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF. + * For STM32F072: (0..15) for GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, (0..10) for GPIOF. + * For STM32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF. + * @retval The output port pin value. + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO output data port. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @retval GPIO output data port value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->ODR); +} + +/** + * @brief Sets the selected data port bits. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param GPIO_Pin: specifies the port bits to be written. + * @note This parameter can be GPIO_Pin_x where x can be: + * For STM32F051 and STM32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF. + * For STM32F072: (0..15) for GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, (0..10) for GPIOF. + * For STM32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF. + * @retval None + */ +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRR = GPIO_Pin; +} + +/** + * @brief Clears the selected data port bits. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param GPIO_Pin: specifies the port bits to be written. + * @note This parameter can be GPIO_Pin_x where x can be: + * For STM32F051 and STM32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF. + * For STM32F072: (0..15) for GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, (0..10) for GPIOF. + * For STM32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF. + * @retval None + */ +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BRR = GPIO_Pin; +} + +/** + * @brief Sets or clears the selected data port bit. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param GPIO_Pin: specifies the port bit to be written. + * @param BitVal: specifies the value to be written to the selected bit. + * This parameter can be one of the BitAction enumeration values: + * @arg Bit_RESET: to clear the port pin + * @arg Bit_SET: to set the port pin + * @note This parameter can be GPIO_Pin_x where x can be: + * For STM32F051 and STM32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF. + * For STM32F072: (0..15) for GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, (0..10) for GPIOF. + * For STM32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF. + * @retval None + */ +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_BIT_ACTION(BitVal)); + + if (BitVal != Bit_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BRR = GPIO_Pin ; + } +} + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param PortVal: specifies the value to be written to the port output data register. + * @retval None + */ +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR = PortVal; +} + +/** + * @} + */ + +/** @defgroup GPIO_Group3 GPIO Alternate functions configuration functions + * @brief GPIO Alternate functions configuration functions + * +@verbatim + =============================================================================== + ##### GPIO Alternate functions configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral. + * @note GPIOC, GPIOD, GPIOE and GPIOF are available only for STM32F072 and STM32F091. + * @param GPIO_PinSource: specifies the pin for the Alternate function. + * This parameter can be GPIO_PinSourcex where x can be (0..15) for GPIOA, GPIOB, GPIOD, GPIOE + * and (0..12) for GPIOC and (0, 2..5, 9..10) for GPIOF. + * @param GPIO_AF: selects the pin to used as Alternate function. + * This parameter can be one of the following value: + * @arg GPIO_AF_0: WKUP, EVENTOUT, TIM15, SPI1, TIM17, MCO, SWDAT, SWCLK, + * TIM14, BOOT, USART1, CEC, IR_OUT, SPI2, TIM3, USART4, + * CAN, USART2, CRS, TIM16, TIM1, TS, USART8 + * @arg GPIO_AF_1: USART2, CEC, TIM3, USART1, USART2, EVENTOUT, I2C1, + * I2C2, TIM15, SPI2, USART3, TS, SPI1, USART7, USART8 + * USART5, USART4, USART6, I2C1 + * @arg GPIO_AF_2: TIM2, TIM1, EVENTOUT, TIM16, TIM17, USB, USART6, USART5, + * USART8, USART7, USART6 + * @arg GPIO_AF_3: TS, I2C1, TIM15, EVENTOUT + * @arg GPIO_AF_4: TIM14, USART4, USART3, CRS, CAN, I2C1, USART5 + * @arg GPIO_AF_5: TIM16, TIM17, TIM15, SPI2, I2C2, USART6, MCO + * @arg GPIO_AF_6: EVENTOUT + * @arg GPIO_AF_7: COMP1 OUT, COMP2 OUT + * @note The pin should already been configured in Alternate Function mode(AF) + * using GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + * @note Refer to the Alternate function mapping table in the device datasheet + * for the detailed mapping of the system and peripherals'alternate + * function I/O pins. + * @retval None + */ +void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF) +{ + uint32_t temp = 0x00; + uint32_t temp_2 = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + assert_param(IS_GPIO_AF(GPIO_AF)); + + temp = ((uint32_t)(GPIO_AF) << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)); + GPIOx->AFR[GPIO_PinSource >> 0x03] &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)); + temp_2 = GPIOx->AFR[GPIO_PinSource >> 0x03] | temp; + GPIOx->AFR[GPIO_PinSource >> 0x03] = temp_2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_i2c.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_i2c.c new file mode 100644 index 0000000..b7c5399 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_i2c.c @@ -0,0 +1,1577 @@ +/** + ****************************************************************************** + * @file stm32f0xx_i2c.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Inter-Integrated circuit (I2C): + * + Initialization and Configuration + * + Communications handling + * + SMBUS management + * + I2C registers management + * + Data transfers management + * + DMA transfers management + * + Interrupts and flags management + * + * @verbatim + ============================================================================ + ##### How to use this driver ##### + ============================================================================ + [..] + (#) Enable peripheral clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2Cx, ENABLE) + function for I2C1 or I2C2. + (#) Enable SDA, SCL and SMBA (when used) GPIO clocks using + RCC_AHBPeriphClockCmd() function. + (#) Peripherals alternate function: + (++) Connect the pin to the desired peripherals' Alternate + Function (AF) using GPIO_PinAFConfig() function. + (++) Configure the desired pin in alternate function by: + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + (++) Select the type, OpenDrain and speed via + GPIO_PuPd, GPIO_OType and GPIO_Speed members + (++) Call GPIO_Init() function. + (#) Program the Mode, Timing , Own address, Ack and Acknowledged Address + using the I2C_Init() function. + (#) Optionally you can enable/configure the following parameters without + re-initialization (i.e there is no need to call again I2C_Init() function): + (++) Enable the acknowledge feature using I2C_AcknowledgeConfig() function. + (++) Enable the dual addressing mode using I2C_DualAddressCmd() function. + (++) Enable the general call using the I2C_GeneralCallCmd() function. + (++) Enable the clock stretching using I2C_StretchClockCmd() function. + (++) Enable the PEC Calculation using I2C_CalculatePEC() function. + (++) For SMBus Mode: + (+++) Enable the SMBusAlert pin using I2C_SMBusAlertCmd() function. + (#) Enable the NVIC and the corresponding interrupt using the function + I2C_ITConfig() if you need to use interrupt mode. + (#) When using the DMA mode + (++) Configure the DMA using DMA_Init() function. + (++) Active the needed channel Request using I2C_DMACmd() function. + (#) Enable the I2C using the I2C_Cmd() function. + (#) Enable the DMA using the DMA_Cmd() function when using DMA mode in the + transfers. + [..] + (@) When using I2C in Fast Mode Plus, SCL and SDA pin 20mA current drive capability + must be enabled by setting the driving capability control bit in SYSCFG. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_i2c.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup I2C + * @brief I2C driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#define CR1_CLEAR_MASK ((uint32_t)0x00CFE0FF) /*I2C_AnalogFilter)); + assert_param(IS_I2C_DIGITAL_FILTER(I2C_InitStruct->I2C_DigitalFilter)); + assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); + assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); + assert_param(IS_I2C_ACK(I2C_InitStruct->I2C_Ack)); + assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); + + /* Disable I2Cx Peripheral */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_PE); + + /*---------------------------- I2Cx FILTERS Configuration ------------------*/ + /* Get the I2Cx CR1 value */ + tmpreg = I2Cx->CR1; + /* Clear I2Cx CR1 register */ + tmpreg &= CR1_CLEAR_MASK; + /* Configure I2Cx: analog and digital filter */ + /* Set ANFOFF bit according to I2C_AnalogFilter value */ + /* Set DFN bits according to I2C_DigitalFilter value */ + tmpreg |= (uint32_t)I2C_InitStruct->I2C_AnalogFilter |(I2C_InitStruct->I2C_DigitalFilter << 8); + + /* Write to I2Cx CR1 */ + I2Cx->CR1 = tmpreg; + + /*---------------------------- I2Cx TIMING Configuration -------------------*/ + /* Configure I2Cx: Timing */ + /* Set TIMINGR bits according to I2C_Timing */ + /* Write to I2Cx TIMING */ + I2Cx->TIMINGR = I2C_InitStruct->I2C_Timing & TIMING_CLEAR_MASK; + + /* Enable I2Cx Peripheral */ + I2Cx->CR1 |= I2C_CR1_PE; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Clear tmpreg local variable */ + tmpreg = 0; + /* Clear OAR1 register */ + I2Cx->OAR1 = (uint32_t)tmpreg; + /* Clear OAR2 register */ + I2Cx->OAR2 = (uint32_t)tmpreg; + /* Configure I2Cx: Own Address1 and acknowledged address */ + /* Set OA1MODE bit according to I2C_AcknowledgedAddress value */ + /* Set OA1 bits according to I2C_OwnAddress1 value */ + tmpreg = (uint32_t)((uint32_t)I2C_InitStruct->I2C_AcknowledgedAddress | \ + (uint32_t)I2C_InitStruct->I2C_OwnAddress1); + /* Write to I2Cx OAR1 */ + I2Cx->OAR1 = tmpreg; + /* Enable Own Address1 acknowledgement */ + I2Cx->OAR1 |= I2C_OAR1_OA1EN; + + /*---------------------------- I2Cx MODE Configuration ---------------------*/ + /* Configure I2Cx: mode */ + /* Set SMBDEN and SMBHEN bits according to I2C_Mode value */ + tmpreg = I2C_InitStruct->I2C_Mode; + /* Write to I2Cx CR1 */ + I2Cx->CR1 |= tmpreg; + + /*---------------------------- I2Cx ACK Configuration ----------------------*/ + /* Get the I2Cx CR2 value */ + tmpreg = I2Cx->CR2; + /* Clear I2Cx CR2 register */ + tmpreg &= CR2_CLEAR_MASK; + /* Configure I2Cx: acknowledgement */ + /* Set NACK bit according to I2C_Ack value */ + tmpreg |= I2C_InitStruct->I2C_Ack; + /* Write to I2Cx CR2 */ + I2Cx->CR2 = tmpreg; +} + +/** + * @brief Fills each I2C_InitStruct member with its default value. + * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) +{ + /*---------------- Reset I2C init structure parameters values --------------*/ + /* Initialize the I2C_Timing member */ + I2C_InitStruct->I2C_Timing = 0; + /* Initialize the I2C_AnalogFilter member */ + I2C_InitStruct->I2C_AnalogFilter = I2C_AnalogFilter_Enable; + /* Initialize the I2C_DigitalFilter member */ + I2C_InitStruct->I2C_DigitalFilter = 0; + /* Initialize the I2C_Mode member */ + I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; + /* Initialize the I2C_OwnAddress1 member */ + I2C_InitStruct->I2C_OwnAddress1 = 0; + /* Initialize the I2C_Ack member */ + I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; + /* Initialize the I2C_AcknowledgedAddress member */ + I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; +} + +/** + * @brief Enables or disables the specified I2C peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= I2C_CR1_PE; + } + else + { + /* Disable the selected I2C peripheral */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_PE); + } +} + +/** + * @brief Enables or disables the specified I2C software reset. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval None + */ +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Disable peripheral */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_PE); + + /* Perform a dummy read to delay the disable of peripheral for minimum + 3 APB clock cycles to perform the software reset functionality */ + *(__IO uint32_t *)(uint32_t)I2Cx; + + /* Enable peripheral */ + I2Cx->CR1 |= I2C_CR1_PE; +} + +/** + * @brief Enables or disables the specified I2C interrupts. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg I2C_IT_ERRI: Error interrupt mask + * @arg I2C_IT_TCI: Transfer Complete interrupt mask + * @arg I2C_IT_STOPI: Stop Detection interrupt mask + * @arg I2C_IT_NACKI: Not Acknowledge received interrupt mask + * @arg I2C_IT_ADDRI: Address Match interrupt mask + * @arg I2C_IT_RXI: RX interrupt mask + * @arg I2C_IT_TXI: TX interrupt mask + * @param NewState: new state of the specified I2C interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint32_t I2C_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_I2C_CONFIG_IT(I2C_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected I2C interrupts */ + I2Cx->CR1 |= I2C_IT; + } + else + { + /* Disable the selected I2C interrupts */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_IT); + } +} + +/** + * @brief Enables or disables the I2C Clock stretching. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Clock stretching. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable clock stretching */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_NOSTRETCH); + } + else + { + /* Disable clock stretching */ + I2Cx->CR1 |= I2C_CR1_NOSTRETCH; + } +} + +/** + * @brief Enables or disables I2C wakeup from stop mode. + * This function is not applicable for STM32F030 devices. + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx stop mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_StopModeCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable wakeup from stop mode */ + I2Cx->CR1 |= I2C_CR1_WUPEN; + } + else + { + /* Disable wakeup from stop mode */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_WUPEN); + } +} + +/** + * @brief Enables or disables the I2C own address 2. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C own address 2. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable own address 2 */ + I2Cx->OAR2 |= I2C_OAR2_OA2EN; + } + else + { + /* Disable own address 2 */ + I2Cx->OAR2 &= (uint32_t)~((uint32_t)I2C_OAR2_OA2EN); + } +} + +/** + * @brief Configures the I2C slave own address 2 and mask. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the slave address to be programmed. + * @param Mask: specifies own address 2 mask to be programmed. + * This parameter can be one of the following values: + * @arg I2C_OA2_NoMask: no mask. + * @arg I2C_OA2_Mask01: OA2[1] is masked and don't care. + * @arg I2C_OA2_Mask02: OA2[2:1] are masked and don't care. + * @arg I2C_OA2_Mask03: OA2[3:1] are masked and don't care. + * @arg I2C_OA2_Mask04: OA2[4:1] are masked and don't care. + * @arg I2C_OA2_Mask05: OA2[5:1] are masked and don't care. + * @arg I2C_OA2_Mask06: OA2[6:1] are masked and don't care. + * @arg I2C_OA2_Mask07: OA2[7:1] are masked and don't care. + * @retval None + */ +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint16_t Address, uint8_t Mask) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_OWN_ADDRESS2(Address)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(Mask)); + + /* Get the old register value */ + tmpreg = I2Cx->OAR2; + + /* Reset I2Cx OA2 bit [7:1] and OA2MSK bit [1:0] */ + tmpreg &= (uint32_t)~((uint32_t)(I2C_OAR2_OA2 | I2C_OAR2_OA2MSK)); + + /* Set I2Cx SADD */ + tmpreg |= (uint32_t)(((uint32_t)Address & I2C_OAR2_OA2) | \ + (((uint32_t)Mask << 8) & I2C_OAR2_OA2MSK)) ; + + /* Store the new register value */ + I2Cx->OAR2 = tmpreg; +} + +/** + * @brief Enables or disables the I2C general call mode. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C general call mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable general call mode */ + I2Cx->CR1 |= I2C_CR1_GCEN; + } + else + { + /* Disable general call mode */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_GCEN); + } +} + +/** + * @brief Enables or disables the I2C slave byte control. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C slave byte control. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_SlaveByteControlCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable slave byte control */ + I2Cx->CR1 |= I2C_CR1_SBC; + } + else + { + /* Disable slave byte control */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_SBC); + } +} + +/** + * @brief Configures the slave address to be transmitted after start generation. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the slave address to be programmed. + * @note This function should be called before generating start condition. + * @retval None + */ +void I2C_SlaveAddressConfig(I2C_TypeDef* I2Cx, uint16_t Address) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_SLAVE_ADDRESS(Address)); + + /* Get the old register value */ + tmpreg = I2Cx->CR2; + + /* Reset I2Cx SADD bit [9:0] */ + tmpreg &= (uint32_t)~((uint32_t)I2C_CR2_SADD); + + /* Set I2Cx SADD */ + tmpreg |= (uint32_t)((uint32_t)Address & I2C_CR2_SADD); + + /* Store the new register value */ + I2Cx->CR2 = tmpreg; +} + +/** + * @brief Enables or disables the I2C 10-bit addressing mode for the master. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C 10-bit addressing mode. + * This parameter can be: ENABLE or DISABLE. + * @note This function should be called before generating start condition. + * @retval None + */ +void I2C_10BitAddressingModeCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable 10-bit addressing mode */ + I2Cx->CR2 |= I2C_CR2_ADD10; + } + else + { + /* Disable 10-bit addressing mode */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_ADD10); + } +} + +/** + * @} + */ + + +/** @defgroup I2C_Group2 Communications handling functions + * @brief Communications handling functions + * +@verbatim + =============================================================================== + ##### Communications handling functions ##### + =============================================================================== + [..] This section provides a set of functions that handles I2C communication. + + [..] Automatic End mode is enabled using I2C_AutoEndCmd() function. When Reload + mode is enabled via I2C_ReloadCmd() AutoEnd bit has no effect. + + [..] I2C_NumberOfBytesConfig() function set the number of bytes to be transferred, + this configuration should be done before generating start condition in master + mode. + + [..] When switching from master write operation to read operation in 10Bit addressing + mode, master can only sends the 1st 7 bits of the 10 bit address, followed by + Read direction by enabling HEADR bit using I2C_10BitAddressHeader() function. + + [..] In master mode, when transferring more than 255 bytes Reload mode should be used + to handle communication. In the first phase of transfer, Nbytes should be set to + 255. After transferring these bytes TCR flag is set and I2C_TransferHandling() + function should be called to handle remaining communication. + + [..] In master mode, when software end mode is selected when all data is transferred + TC flag is set I2C_TransferHandling() function should be called to generate STOP + or generate ReStart. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the I2C automatic end mode (stop condition is + * automatically sent when nbytes data are transferred). + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C automatic end mode. + * This parameter can be: ENABLE or DISABLE. + * @note This function has effect if Reload mode is disabled. + * @retval None + */ +void I2C_AutoEndCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Auto end mode */ + I2Cx->CR2 |= I2C_CR2_AUTOEND; + } + else + { + /* Disable Auto end mode */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_AUTOEND); + } +} + +/** + * @brief Enables or disables the I2C nbytes reload mode. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the nbytes reload mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ReloadCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Auto Reload mode */ + I2Cx->CR2 |= I2C_CR2_RELOAD; + } + else + { + /* Disable Auto Reload mode */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_RELOAD); + } +} + +/** + * @brief Configures the number of bytes to be transmitted/received. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Number_Bytes: specifies the number of bytes to be programmed. + * @retval None + */ +void I2C_NumberOfBytesConfig(I2C_TypeDef* I2Cx, uint8_t Number_Bytes) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Get the old register value */ + tmpreg = I2Cx->CR2; + + /* Reset I2Cx Nbytes bit [7:0] */ + tmpreg &= (uint32_t)~((uint32_t)I2C_CR2_NBYTES); + + /* Set I2Cx Nbytes */ + tmpreg |= (uint32_t)(((uint32_t)Number_Bytes << 16 ) & I2C_CR2_NBYTES); + + /* Store the new register value */ + I2Cx->CR2 = tmpreg; +} + +/** + * @brief Configures the type of transfer request for the master. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_Direction: specifies the transfer request direction to be programmed. + * This parameter can be one of the following values: + * @arg I2C_Direction_Transmitter: Master request a write transfer + * @arg I2C_Direction_Receiver: Master request a read transfer + * @retval None + */ +void I2C_MasterRequestConfig(I2C_TypeDef* I2Cx, uint16_t I2C_Direction) +{ +/* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DIRECTION(I2C_Direction)); + + /* Test on the direction to set/reset the read/write bit */ + if (I2C_Direction == I2C_Direction_Transmitter) + { + /* Request a write Transfer */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_RD_WRN); + } + else + { + /* Request a read Transfer */ + I2Cx->CR2 |= I2C_CR2_RD_WRN; + } +} + +/** + * @brief Generates I2Cx communication START condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C START condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Generate a START condition */ + I2Cx->CR2 |= I2C_CR2_START; + } + else + { + /* Disable the START condition generation */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_START); + } +} + +/** + * @brief Generates I2Cx communication STOP condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C STOP condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Generate a STOP condition */ + I2Cx->CR2 |= I2C_CR2_STOP; + } + else + { + /* Disable the STOP condition generation */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_STOP); + } +} + +/** + * @brief Enables or disables the I2C 10-bit header only mode with read direction. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C 10-bit header only mode. + * This parameter can be: ENABLE or DISABLE. + * @note This mode can be used only when switching from master transmitter mode + * to master receiver mode. + * @retval None + */ +void I2C_10BitAddressHeaderCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable 10-bit header only mode */ + I2Cx->CR2 |= I2C_CR2_HEAD10R; + } + else + { + /* Disable 10-bit header only mode */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_HEAD10R); + } +} + +/** + * @brief Generates I2C communication Acknowledge. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the Acknowledge. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable ACK generation */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_NACK); + } + else + { + /* Enable NACK generation */ + I2Cx->CR2 |= I2C_CR2_NACK; + } +} + +/** + * @brief Returns the I2C slave matched address . + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The value of the slave matched address . + */ +uint8_t I2C_GetAddressMatched(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Return the slave matched address in the SR1 register */ + return (uint8_t)(((uint32_t)I2Cx->ISR & I2C_ISR_ADDCODE) >> 16) ; +} + +/** + * @brief Returns the I2C slave received request. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The value of the received request. + */ +uint16_t I2C_GetTransferDirection(I2C_TypeDef* I2Cx) +{ + uint32_t tmpreg = 0; + uint16_t direction = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Return the slave matched address in the SR1 register */ + tmpreg = (uint32_t)(I2Cx->ISR & I2C_ISR_DIR); + + /* If write transfer is requested */ + if (tmpreg == 0) + { + /* write transfer is requested */ + direction = I2C_Direction_Transmitter; + } + else + { + /* Read transfer is requested */ + direction = I2C_Direction_Receiver; + } + return direction; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the slave address to be programmed. + * @param Number_Bytes: specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param ReloadEndMode: new state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg I2C_Reload_Mode: Enable Reload mode . + * @arg I2C_AutoEnd_Mode: Enable Automatic end mode. + * @arg I2C_SoftEnd_Mode: Enable Software end mode. + * @param StartStopMode: new state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg I2C_No_StartStop: Don't Generate stop and start condition. + * @arg I2C_Generate_Stop: Generate stop condition (Number_Bytes should be set to 0). + * @arg I2C_Generate_Start_Read: Generate Restart for read request. + * @arg I2C_Generate_Start_Write: Generate Restart for write request. + * @retval None + */ +void I2C_TransferHandling(I2C_TypeDef* I2Cx, uint16_t Address, uint8_t Number_Bytes, uint32_t ReloadEndMode, uint32_t StartStopMode) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_SLAVE_ADDRESS(Address)); + assert_param(IS_RELOAD_END_MODE(ReloadEndMode)); + assert_param(IS_START_STOP_MODE(StartStopMode)); + + /* Get the CR2 register value */ + tmpreg = I2Cx->CR2; + + /* clear tmpreg specific bits */ + tmpreg &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)); + + /* update tmpreg */ + tmpreg |= (uint32_t)(((uint32_t)Address & I2C_CR2_SADD) | (((uint32_t)Number_Bytes << 16 ) & I2C_CR2_NBYTES) | \ + (uint32_t)ReloadEndMode | (uint32_t)StartStopMode); + + /* update CR2 register */ + I2Cx->CR2 = tmpreg; +} + +/** + * @} + */ + + +/** @defgroup I2C_Group3 SMBUS management functions + * @brief SMBUS management functions + * +@verbatim + =============================================================================== + ##### SMBUS management functions ##### + =============================================================================== + [..] This section provides a set of functions that handles SMBus communication + and timeouts detection. + + [..] The SMBus Device default address (0b1100 001) is enabled by calling I2C_Init() + function and setting I2C_Mode member of I2C_InitTypeDef() structure to + I2C_Mode_SMBusDevice. + + [..] The SMBus Host address (0b0001 000) is enabled by calling I2C_Init() + function and setting I2C_Mode member of I2C_InitTypeDef() structure to + I2C_Mode_SMBusHost. + + [..] The Alert Response Address (0b0001 100) is enabled using I2C_SMBusAlertCmd() + function. + + [..] To detect cumulative SCL stretch in master and slave mode, TIMEOUTB should be + configured (in accordance to SMBus specification) using I2C_TimeoutBConfig() + function then I2C_ExtendedClockTimeoutCmd() function should be called to enable + the detection. + + [..] SCL low timeout is detected by configuring TIMEOUTB using I2C_TimeoutBConfig() + function followed by the call of I2C_ClockTimeoutCmd(). When adding to this + procedure the call of I2C_IdleClockTimeoutCmd() function, Bus Idle condition + (both SCL and SDA high) is detected also. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables I2C SMBus alert. + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx SMBus alert. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_SMBusAlertCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable SMBus alert */ + I2Cx->CR1 |= I2C_CR1_ALERTEN; + } + else + { + /* Disable SMBus alert */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_ALERTEN); + } +} + +/** + * @brief Enables or disables I2C Clock Timeout (SCL Timeout detection). + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx clock Timeout. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ClockTimeoutCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Clock Timeout */ + I2Cx->TIMEOUTR |= I2C_TIMEOUTR_TIMOUTEN; + } + else + { + /* Disable Clock Timeout */ + I2Cx->TIMEOUTR &= (uint32_t)~((uint32_t)I2C_TIMEOUTR_TIMOUTEN); + } +} + +/** + * @brief Enables or disables I2C Extended Clock Timeout (SCL cumulative Timeout detection). + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Extended clock Timeout. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ExtendedClockTimeoutCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Clock Timeout */ + I2Cx->TIMEOUTR |= I2C_TIMEOUTR_TEXTEN; + } + else + { + /* Disable Clock Timeout */ + I2Cx->TIMEOUTR &= (uint32_t)~((uint32_t)I2C_TIMEOUTR_TEXTEN); + } +} + +/** + * @brief Enables or disables I2C Idle Clock Timeout (Bus idle SCL and SDA + * high detection). + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Idle clock Timeout. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_IdleClockTimeoutCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Clock Timeout */ + I2Cx->TIMEOUTR |= I2C_TIMEOUTR_TIDLE; + } + else + { + /* Disable Clock Timeout */ + I2Cx->TIMEOUTR &= (uint32_t)~((uint32_t)I2C_TIMEOUTR_TIDLE); + } +} + +/** + * @brief Configures the I2C Bus Timeout A (SCL Timeout when TIDLE = 0 or Bus + * idle SCL and SDA high when TIDLE = 1). + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param Timeout: specifies the TimeoutA to be programmed. + * @retval None + */ +void I2C_TimeoutAConfig(I2C_TypeDef* I2Cx, uint16_t Timeout) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_I2C_TIMEOUT(Timeout)); + + /* Get the old register value */ + tmpreg = I2Cx->TIMEOUTR; + + /* Reset I2Cx TIMEOUTA bit [11:0] */ + tmpreg &= (uint32_t)~((uint32_t)I2C_TIMEOUTR_TIMEOUTA); + + /* Set I2Cx TIMEOUTA */ + tmpreg |= (uint32_t)((uint32_t)Timeout & I2C_TIMEOUTR_TIMEOUTA) ; + + /* Store the new register value */ + I2Cx->TIMEOUTR = tmpreg; +} + +/** + * @brief Configures the I2C Bus Timeout B (SCL cumulative Timeout). + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param Timeout: specifies the TimeoutB to be programmed. + * @retval None + */ +void I2C_TimeoutBConfig(I2C_TypeDef* I2Cx, uint16_t Timeout) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_I2C_TIMEOUT(Timeout)); + + /* Get the old register value */ + tmpreg = I2Cx->TIMEOUTR; + + /* Reset I2Cx TIMEOUTB bit [11:0] */ + tmpreg &= (uint32_t)~((uint32_t)I2C_TIMEOUTR_TIMEOUTB); + + /* Set I2Cx TIMEOUTB */ + tmpreg |= (uint32_t)(((uint32_t)Timeout << 16) & I2C_TIMEOUTR_TIMEOUTB) ; + + /* Store the new register value */ + I2Cx->TIMEOUTR = tmpreg; +} + +/** + * @brief Enables or disables I2C PEC calculation. + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx PEC calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable PEC calculation */ + I2Cx->CR1 |= I2C_CR1_PECEN; + } + else + { + /* Disable PEC calculation */ + I2Cx->CR1 &= (uint32_t)~((uint32_t)I2C_CR1_PECEN); + } +} + +/** + * @brief Enables or disables I2C PEC transmission/reception request. + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @param NewState: new state of the I2Cx PEC request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_PECRequestCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable PEC transmission/reception request */ + I2Cx->CR2 |= I2C_CR2_PECBYTE; + } + else + { + /* Disable PEC transmission/reception request */ + I2Cx->CR2 &= (uint32_t)~((uint32_t)I2C_CR2_PECBYTE); + } +} + +/** + * @brief Returns the I2C PEC. + * @param I2Cx: where x can be 1 to select the I2C peripheral. + * @retval The value of the PEC . + */ +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_1_PERIPH(I2Cx)); + + /* Return the slave matched address in the SR1 register */ + return (uint8_t)((uint32_t)I2Cx->PECR & I2C_PECR_PEC); +} + +/** + * @} + */ + + +/** @defgroup I2C_Group4 I2C registers management functions + * @brief I2C registers management functions + * +@verbatim + =============================================================================== + ##### I2C registers management functions ##### + =============================================================================== + [..] This section provides a functions that allow user the management of + I2C registers. + +@endverbatim + * @{ + */ + + /** + * @brief Reads the specified I2C register and returns its value. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_Register: specifies the register to read. + * This parameter can be one of the following values: + * @arg I2C_Register_CR1: CR1 register. + * @arg I2C_Register_CR2: CR2 register. + * @arg I2C_Register_OAR1: OAR1 register. + * @arg I2C_Register_OAR2: OAR2 register. + * @arg I2C_Register_TIMINGR: TIMING register. + * @arg I2C_Register_TIMEOUTR: TIMEOUTR register. + * @arg I2C_Register_ISR: ISR register. + * @arg I2C_Register_ICR: ICR register. + * @arg I2C_Register_PECR: PECR register. + * @arg I2C_Register_RXDR: RXDR register. + * @arg I2C_Register_TXDR: TXDR register. + * @retval The value of the read register. + */ +uint32_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_REGISTER(I2C_Register)); + + tmp = (uint32_t)I2Cx; + tmp += I2C_Register; + + /* Return the selected register value */ + return (*(__IO uint32_t *) tmp); +} + +/** + * @} + */ + +/** @defgroup I2C_Group5 Data transfers management functions + * @brief Data transfers management functions + * +@verbatim + =============================================================================== + ##### Data transfers management functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage + the I2C data transfers. + + [..] The read access of the I2C_RXDR register can be done using + the I2C_ReceiveData() function and returns the received value. + Whereas a write access to the I2C_TXDR can be done using I2C_SendData() + function and stores the written data into TXDR. +@endverbatim + * @{ + */ + +/** + * @brief Sends a data byte through the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Data: Byte to be transmitted.. + * @retval None + */ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Write in the DR register the data to be sent */ + I2Cx->TXDR = (uint8_t)Data; +} + +/** + * @brief Returns the most recent received data by the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The value of the received data. + */ +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Return the data in the DR register */ + return (uint8_t)I2Cx->RXDR; +} + +/** + * @} + */ + + +/** @defgroup I2C_Group6 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + ##### DMA transfers management functions ##### + =============================================================================== + [..] This section provides two functions that can be used only in DMA mode. + [..] In DMA Mode, the I2C communication can be managed by 2 DMA Channel + requests: + (#) I2C_DMAReq_Tx: specifies the Tx buffer DMA transfer request. + (#) I2C_DMAReq_Rx: specifies the Rx buffer DMA transfer request. + [..] In this Mode it is advised to use the following function: + (+) I2C_DMACmd(I2C_TypeDef* I2Cx, uint32_t I2C_DMAReq, FunctionalState NewState); +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the I2C DMA interface. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_DMAReq: specifies the I2C DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg I2C_DMAReq_Tx: Tx DMA transfer request + * @arg I2C_DMAReq_Rx: Rx DMA transfer request + * @param NewState: new state of the selected I2C DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMACmd(I2C_TypeDef* I2Cx, uint32_t I2C_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_I2C_DMA_REQ(I2C_DMAReq)); + + if (NewState != DISABLE) + { + /* Enable the selected I2C DMA requests */ + I2Cx->CR1 |= I2C_DMAReq; + } + else + { + /* Disable the selected I2C DMA requests */ + I2Cx->CR1 &= (uint32_t)~I2C_DMAReq; + } +} +/** + * @} + */ + + +/** @defgroup I2C_Group7 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the I2C Interrupts + sources and check or clear the flags or pending bits status. + The user should identify which mode will be used in his application to manage + the communication: Polling mode, Interrupt mode or DMA mode(refer I2C_Group6). + + *** Polling Mode *** + ==================== + [..] In Polling Mode, the I2C communication can be managed by 15 flags: + (#) I2C_FLAG_TXE: to indicate the status of Transmit data register empty flag. + (#) I2C_FLAG_TXIS: to indicate the status of Transmit interrupt status flag . + (#) I2C_FLAG_RXNE: to indicate the status of Receive data register not empty flag. + (#) I2C_FLAG_ADDR: to indicate the status of Address matched flag (slave mode). + (#) I2C_FLAG_NACKF: to indicate the status of NACK received flag. + (#) I2C_FLAG_STOPF: to indicate the status of STOP detection flag. + (#) I2C_FLAG_TC: to indicate the status of Transfer complete flag(master mode). + (#) I2C_FLAG_TCR: to indicate the status of Transfer complete reload flag. + (#) I2C_FLAG_BERR: to indicate the status of Bus error flag. + (#) I2C_FLAG_ARLO: to indicate the status of Arbitration lost flag. + (#) I2C_FLAG_OVR: to indicate the status of Overrun/Underrun flag. + (#) I2C_FLAG_PECERR: to indicate the status of PEC error in reception flag. + (#) I2C_FLAG_TIMEOUT: to indicate the status of Timeout or Tlow detection flag. + (#) I2C_FLAG_ALERT: to indicate the status of SMBus Alert flag. + (#) I2C_FLAG_BUSY: to indicate the status of Bus busy flag. + + [..] In this Mode it is advised to use the following functions: + (+) FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); + (+) void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); + + [..] + (@)Do not use the BUSY flag to handle each data transmission or reception.It is + better to use the TXIS and RXNE flags instead. + + *** Interrupt Mode *** + ====================== + [..] In Interrupt Mode, the I2C communication can be managed by 7 interrupt sources + and 15 pending bits: + [..] Interrupt Source: + (#) I2C_IT_ERRI: specifies the interrupt source for the Error interrupt. + (#) I2C_IT_TCI: specifies the interrupt source for the Transfer Complete interrupt. + (#) I2C_IT_STOPI: specifies the interrupt source for the Stop Detection interrupt. + (#) I2C_IT_NACKI: specifies the interrupt source for the Not Acknowledge received interrupt. + (#) I2C_IT_ADDRI: specifies the interrupt source for the Address Match interrupt. + (#) I2C_IT_RXI: specifies the interrupt source for the RX interrupt. + (#) I2C_IT_TXI: specifies the interrupt source for the TX interrupt. + + [..] Pending Bits: + (#) I2C_IT_TXIS: to indicate the status of Transmit interrupt status flag. + (#) I2C_IT_RXNE: to indicate the status of Receive data register not empty flag. + (#) I2C_IT_ADDR: to indicate the status of Address matched flag (slave mode). + (#) I2C_IT_NACKF: to indicate the status of NACK received flag. + (#) I2C_IT_STOPF: to indicate the status of STOP detection flag. + (#) I2C_IT_TC: to indicate the status of Transfer complete flag (master mode). + (#) I2C_IT_TCR: to indicate the status of Transfer complete reload flag. + (#) I2C_IT_BERR: to indicate the status of Bus error flag. + (#) I2C_IT_ARLO: to indicate the status of Arbitration lost flag. + (#) I2C_IT_OVR: to indicate the status of Overrun/Underrun flag. + (#) I2C_IT_PECERR: to indicate the status of PEC error in reception flag. + (#) I2C_IT_TIMEOUT: to indicate the status of Timeout or Tlow detection flag. + (#) I2C_IT_ALERT: to indicate the status of SMBus Alert flag. + + [..] In this Mode it is advised to use the following functions: + (+) void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + (+) ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified I2C flag is set or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_TXE: Transmit data register empty + * @arg I2C_FLAG_TXIS: Transmit interrupt status + * @arg I2C_FLAG_RXNE: Receive data register not empty + * @arg I2C_FLAG_ADDR: Address matched (slave mode) + * @arg I2C_FLAG_NACKF: NACK received flag + * @arg I2C_FLAG_STOPF: STOP detection flag + * @arg I2C_FLAG_TC: Transfer complete (master mode) + * @arg I2C_FLAG_TCR: Transfer complete reload + * @arg I2C_FLAG_BERR: Bus error + * @arg I2C_FLAG_ARLO: Arbitration lost + * @arg I2C_FLAG_OVR: Overrun/Underrun + * @arg I2C_FLAG_PECERR: PEC error in reception + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag + * @arg I2C_FLAG_ALERT: SMBus Alert + * @arg I2C_FLAG_BUSY: Bus busy + * @retval The new state of I2C_FLAG (SET or RESET). + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + uint32_t tmpreg = 0; + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); + + /* Get the ISR register value */ + tmpreg = I2Cx->ISR; + + /* Get flag status */ + tmpreg &= I2C_FLAG; + + if(tmpreg != 0) + { + /* I2C_FLAG is set */ + bitstatus = SET; + } + else + { + /* I2C_FLAG is reset */ + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the I2Cx's pending flags. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_ADDR: Address matched (slave mode) + * @arg I2C_FLAG_NACKF: NACK received flag + * @arg I2C_FLAG_STOPF: STOP detection flag + * @arg I2C_FLAG_BERR: Bus error + * @arg I2C_FLAG_ARLO: Arbitration lost + * @arg I2C_FLAG_OVR: Overrun/Underrun + * @arg I2C_FLAG_PECERR: PEC error in reception + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag + * @arg I2C_FLAG_ALERT: SMBus Alert + * @retval The new state of I2C_FLAG (SET or RESET). + */ +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); + + /* Clear the selected flag */ + I2Cx->ICR = I2C_FLAG; + } + +/** + * @brief Checks whether the specified I2C interrupt has occurred or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_TXIS: Transmit interrupt status + * @arg I2C_IT_RXNE: Receive data register not empty + * @arg I2C_IT_ADDR: Address matched (slave mode) + * @arg I2C_IT_NACKF: NACK received flag + * @arg I2C_IT_STOPF: STOP detection flag + * @arg I2C_IT_TC: Transfer complete (master mode) + * @arg I2C_IT_TCR: Transfer complete reload + * @arg I2C_IT_BERR: Bus error + * @arg I2C_IT_ARLO: Arbitration lost + * @arg I2C_IT_OVR: Overrun/Underrun + * @arg I2C_IT_PECERR: PEC error in reception + * @arg I2C_IT_TIMEOUT: Timeout or Tlow detection flag + * @arg I2C_IT_ALERT: SMBus Alert + * @retval The new state of I2C_IT (SET or RESET). + */ +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + uint32_t tmpreg = 0; + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_IT(I2C_IT)); + + /* Check if the interrupt source is enabled or not */ + /* If Error interrupt */ + if ((uint32_t)(I2C_IT & ERROR_IT_MASK)) + { + enablestatus = (uint32_t)((I2C_CR1_ERRIE) & (I2Cx->CR1)); + } + /* If TC interrupt */ + else if ((uint32_t)(I2C_IT & TC_IT_MASK)) + { + enablestatus = (uint32_t)((I2C_CR1_TCIE) & (I2Cx->CR1)); + } + else + { + enablestatus = (uint32_t)((I2C_IT) & (I2Cx->CR1)); + } + + /* Get the ISR register value */ + tmpreg = I2Cx->ISR; + + /* Get flag status */ + tmpreg &= I2C_IT; + + /* Check the status of the specified I2C flag */ + if((tmpreg != RESET) && enablestatus) + { + /* I2C_IT is set */ + bitstatus = SET; + } + else + { + /* I2C_IT is reset */ + bitstatus = RESET; + } + + /* Return the I2C_IT status */ + return bitstatus; +} + +/** + * @brief Clears the I2Cx's interrupt pending bits. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg I2C_IT_ADDR: Address matched (slave mode) + * @arg I2C_IT_NACKF: NACK received flag + * @arg I2C_IT_STOPF: STOP detection flag + * @arg I2C_IT_BERR: Bus error + * @arg I2C_IT_ARLO: Arbitration lost + * @arg I2C_IT_OVR: Overrun/Underrun + * @arg I2C_IT_PECERR: PEC error in reception + * @arg I2C_IT_TIMEOUT: Timeout or Tlow detection flag + * @arg I2C_IT_ALERT: SMBus Alert + * @retval The new state of I2C_IT (SET or RESET). + */ +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_IT(I2C_IT)); + + /* Clear the selected flag */ + I2Cx->ICR = I2C_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_iwdg.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_iwdg.c new file mode 100644 index 0000000..c668976 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_iwdg.c @@ -0,0 +1,285 @@ +/** + ****************************************************************************** + * @file stm32f0xx_iwdg.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Independent watchdog (IWDG) peripheral: + * + Prescaler and Counter configuration + * + IWDG activation + * + Flag management + * + * @verbatim + * + ============================================================================== + ##### IWDG features ##### + ============================================================================== + [..] The IWDG can be started by either software or hardware (configurable + through option byte). + + [..] The IWDG is clocked by its own dedicated low-speed clock (LSI) and + thus stays active even if the main clock fails. + Once the IWDG is started, the LSI is forced ON and cannot be disabled + (LSI cannot be disabled too), and the counter starts counting down from + the reset value of 0xFFF. When it reaches the end of count value (0x000) + a system reset is generated. + The IWDG counter should be reloaded at regular intervals to prevent + an MCU reset. + + [..] The IWDG is implemented in the VDD voltage domain that is still functional + in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY). + + [..] IWDGRST flag in RCC_CSR register can be used to inform when a IWDG + reset occurs. + + [..] Min-max timeout value @40KHz (LSI): ~0.1ms / ~28.3s + The IWDG timeout may vary due to LSI frequency dispersion. STM32F0xx + devices provide the capability to measure the LSI frequency (LSI clock + should be seleted as RTC clock which is internally connected to TIM10 CH1 + input capture). The measured value can be used to have an IWDG timeout with + an acceptable accuracy. + For more information, please refer to the STM32F0xx Reference manual. + + ##### How to use this driver ##### + ============================================================================== + [..] This driver allows to use IWDG peripheral with either window option enabled + or disabled. To do so follow one of the two procedures below. + (#) Window option is enabled: + (++) Start the IWDG using IWDG_Enable() function, when the IWDG is used + in software mode (no need to enable the LSI, it will be enabled + by hardware). + (++) Enable write access to IWDG_PR and IWDG_RLR registers using + IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable) function. + (++) Configure the IWDG prescaler using IWDG_SetPrescaler() function. + (++) Configure the IWDG counter value using IWDG_SetReload() function. + This value will be loaded in the IWDG counter each time the counter + is reloaded, then the IWDG will start counting down from this value. + (++) Wait for the IWDG registers to be updated using IWDG_GetFlagStatus() function. + (++) Configure the IWDG refresh window using IWDG_SetWindowValue() function. + + (#) Window option is disabled: + (++) Enable write access to IWDG_PR and IWDG_RLR registers using + IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable) function. + (++) Configure the IWDG prescaler using IWDG_SetPrescaler() function. + (++) Configure the IWDG counter value using IWDG_SetReload() function. + This value will be loaded in the IWDG counter each time the counter + is reloaded, then the IWDG will start counting down from this value. + (++) Wait for the IWDG registers to be updated using IWDG_GetFlagStatus() function. + (++) reload the IWDG counter at regular intervals during normal operation + to prevent an MCU reset, using IWDG_ReloadCounter() function. + (++) Start the IWDG using IWDG_Enable() function, when the IWDG is used + in software mode (no need to enable the LSI, it will be enabled + by hardware). + + @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_iwdg.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup IWDG + * @brief IWDG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* ---------------------- IWDG registers bit mask ----------------------------*/ +/* KR register bit mask */ +#define KR_KEY_RELOAD ((uint16_t)0xAAAA) +#define KR_KEY_ENABLE ((uint16_t)0xCCCC) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup IWDG_Private_Functions + * @{ + */ + +/** @defgroup IWDG_Group1 Prescaler and Counter configuration functions + * @brief Prescaler and Counter configuration functions + * +@verbatim + ============================================================================== + ##### Prescaler and Counter configuration functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. + * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. + * This parameter can be one of the following values: + * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers + * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers + * @retval None + */ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) +{ + /* Check the parameters */ + assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); + IWDG->KR = IWDG_WriteAccess; +} + +/** + * @brief Sets IWDG Prescaler value. + * @param IWDG_Prescaler: specifies the IWDG Prescaler value. + * This parameter can be one of the following values: + * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 + * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 + * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 + * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 + * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 + * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 + * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 + * @retval None + */ +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); + IWDG->PR = IWDG_Prescaler; +} + +/** + * @brief Sets IWDG Reload value. + * @param Reload: specifies the IWDG Reload value. + * This parameter must be a number between 0 and 0x0FFF. + * @retval None + */ +void IWDG_SetReload(uint16_t Reload) +{ + /* Check the parameters */ + assert_param(IS_IWDG_RELOAD(Reload)); + IWDG->RLR = Reload; +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_ReloadCounter(void) +{ + IWDG->KR = KR_KEY_RELOAD; +} + + +/** + * @brief Sets the IWDG window value. + * @param WindowValue: specifies the window value to be compared to the downcounter. + * @retval None + */ +void IWDG_SetWindowValue(uint16_t WindowValue) +{ + /* Check the parameters */ + assert_param(IS_IWDG_WINDOW_VALUE(WindowValue)); + IWDG->WINR = WindowValue; +} + +/** + * @} + */ + +/** @defgroup IWDG_Group2 IWDG activation function + * @brief IWDG activation function + * +@verbatim + ============================================================================== + ##### IWDG activation function ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_Enable(void) +{ + IWDG->KR = KR_KEY_ENABLE; +} + +/** + * @} + */ + +/** @defgroup IWDG_Group3 Flag management function + * @brief Flag management function + * +@verbatim + =============================================================================== + ##### Flag management function ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified IWDG flag is set or not. + * @param IWDG_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg IWDG_FLAG_PVU: Prescaler Value Update on going + * @arg IWDG_FLAG_RVU: Reload Value Update on going + * @arg IWDG_FLAG_WVU: Counter Window Value Update on going + * @retval The new state of IWDG_FLAG (SET or RESET). + */ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_IWDG_FLAG(IWDG_FLAG)); + if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_misc.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_misc.c new file mode 100644 index 0000000..b1f6ed9 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_misc.c @@ -0,0 +1,159 @@ +/** + ****************************************************************************** + * @file stm32f0xx_misc.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_misc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup MISC_Private_Functions + * @{ + */ +/** + * +@verbatim + ******************************************************************************* + ##### Interrupts configuration functions ##### + ******************************************************************************* + [..] This section provide functions allowing to configure the NVIC interrupts + (IRQ). The Cortex-M0 exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + +@endverbatim +*/ + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint32_t tmppriority = 0x00; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel >> 0x02]; + tmppriority &= (uint32_t)(~(((uint32_t)0xFF) << ((NVIC_InitStruct->NVIC_IRQChannel & 0x03) * 8))); + tmppriority |= (uint32_t)((((uint32_t)NVIC_InitStruct->NVIC_IRQChannelPriority << 6) & 0xFF) << ((NVIC_InitStruct->NVIC_IRQChannel & 0x03) * 8)); + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel >> 0x02] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[0] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[0] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend. + * @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request. + * @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit. + * @param NewState: new state of LP condition. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_pwr.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_pwr.c new file mode 100644 index 0000000..8ea47ba --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_pwr.c @@ -0,0 +1,558 @@ +/** + ****************************************************************************** + * @file stm32f0xx_pwr.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Backup Domain Access + * + PVD configuration + * + WakeUp pins configuration + * + Low Power modes configuration + * + Flags management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_pwr.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup PWR + * @brief PWR driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ------------------ PWR registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_DS_MASK ((uint32_t)0xFFFFFFFC) +#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Private_Functions + * @{ + */ + +/** @defgroup PWR_Group1 Backup Domain Access function + * @brief Backup Domain Access function + * +@verbatim + ============================================================================== + ##### Backup Domain Access function ##### + ============================================================================== + + [..] After reset, the Backup Domain Registers (RCC BDCR Register, RTC registers + and RTC backup registers) are protected against possible stray write accesses. + [..] To enable access to Backup domain use the PWR_BackupAccessCmd(ENABLE) function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @param None + * @retval None + */ +void PWR_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); +} + +/** + * @brief Enables or disables access to the Backup domain registers. + * @note If the HSE divided by 32 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @param NewState: new state of the access to the Backup domain registers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_BackupAccessCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Backup Domain Access */ + PWR->CR |= PWR_CR_DBP; + } + else + { + /* Disable the Backup Domain Access */ + PWR->CR &= (uint32_t)~((uint32_t)PWR_CR_DBP); + } +} + +/** + * @} + */ + +/** @defgroup PWR_Group2 PVD configuration functions + * @brief PVD configuration functions + * +@verbatim + ============================================================================== + ##### PVD configuration functions ##### + ============================================================================== + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a threshold + selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower than the + PVD threshold. This event is internally connected to the EXTI line16 + and can generate an interrupt if enabled through the EXTI registers. + (+) The PVD is stopped in Standby mode. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @note This function is not applicable for STM32F030 devices. + * @param PWR_PVDLevel: specifies the PVD detection level + * This parameter can be one of the following values: + * @arg PWR_PVDLevel_0 + * @arg PWR_PVDLevel_1 + * @arg PWR_PVDLevel_2 + * @arg PWR_PVDLevel_3 + * @arg PWR_PVDLevel_4 + * @arg PWR_PVDLevel_5 + * @arg PWR_PVDLevel_6 + * @arg PWR_PVDLevel_7 + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @retval None + */ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); + + tmpreg = PWR->CR; + + /* Clear PLS[7:5] bits */ + tmpreg &= CR_PLS_MASK; + + /* Set PLS[7:5] bits according to PWR_PVDLevel value */ + tmpreg |= PWR_PVDLevel; + + /* Store the new value */ + PWR->CR = tmpreg; +} + +/** + * @brief Enables or disables the Power Voltage Detector(PVD). + * @note This function is not applicable for STM32F030 devices. + * @param NewState: new state of the PVD. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_PVDCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the PVD */ + PWR->CR |= PWR_CR_PVDE; + } + else + { + /* Disable the PVD */ + PWR->CR &= (uint32_t)~((uint32_t)PWR_CR_PVDE); + } +} + +/** + * @} + */ + +/** @defgroup PWR_Group3 WakeUp pins configuration functions + * @brief WakeUp pins configuration functions + * +@verbatim + ============================================================================== + ##### WakeUp pin configuration functions ##### + ============================================================================== + + (+) WakeUp pins are used to wakeup the system from Standby mode. These pins are + forced in input pull down configuration and are active on rising edges. + (+) There are eight WakeUp pins: WakeUp Pin 1 on PA.00 and WakeUp Pin 2 on PC.13. + The following WakeUp pins are only applicable for STM32F072 dvices: + WakeUp Pin 3 on PE.06, WakeUp Pin 4 on PA.02, WakeUp Pin 5 on PC.05, + WakeUp Pin 6 on PB.05, WakeUp Pin 7 on PB.15 and WakeUp Pin 8 on PF.02. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the WakeUp Pin functionality. + * @param PWR_WakeUpPin: specifies the WakeUpPin. + * This parameter can be one of the following values + * @arg PWR_WakeUpPin_1 + * @arg PWR_WakeUpPin_2 + * @arg PWR_WakeUpPin_3, only applicable for STM32F072 devices + * @arg PWR_WakeUpPin_4, only applicable for STM32F072 devices + * @arg PWR_WakeUpPin_5, only applicable for STM32F072 devices + * @arg PWR_WakeUpPin_6, only applicable for STM32F072 devices + * @arg PWR_WakeUpPin_7, only applicable for STM32F072 devices + * @arg PWR_WakeUpPin_8, only applicable for STM32F072 devices + * @param NewState: new state of the WakeUp Pin functionality. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_PIN(PWR_WakeUpPin)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the EWUPx pin */ + PWR->CSR |= PWR_WakeUpPin; + } + else + { + /* Disable the EWUPx pin */ + PWR->CSR &= ~PWR_WakeUpPin; + } +} + +/** + * @} + */ + + +/** @defgroup PWR_Group4 Low Power modes configuration functions + * @brief Low Power modes configuration functions + * +@verbatim + ============================================================================== + ##### Low Power modes configuration functions ##### + ============================================================================== + + [..] The devices feature three low-power modes: + (+) Sleep mode: Cortex-M0 core stopped, peripherals kept running. + (+) Stop mode: all clocks are stopped, regulator running, regulator in low power mode + (+) Standby mode: VCORE domain powered off + + *** Sleep mode *** + ================== + [..] + (+) Entry: + (++) The Sleep mode is entered by executing the WFE() or WFI() instructions. + (+) Exit: + (++) Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + + *** Stop mode *** + ================= + [..] In Stop mode, all clocks in the VCORE domain are stopped, the PLL, the HSI, + the HSI14 and the HSE RC oscillators are disabled. Internal SRAM and register + contents are preserved. + The voltage regulator can be configured either in normal or low-power mode. + + (+) Entry: + (++) The Stop mode is entered using the PWR_EnterSTOPMode(PWR_Regulator_LowPower,) + function with regulator in LowPower or with Regulator ON. + (+) Exit: + (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode + or any internal IPs (I2C, UASRT or CEC) wakeup event. + + *** Standby mode *** + ==================== + [..] The Standby mode allows to achieve the lowest power consumption. It is based + on the Cortex-M0 deepsleep mode, with the voltage regulator disabled. + The VCORE domain is consequently powered off. The PLL, the HSI, the HSI14 + oscillator and the HSE oscillator are also switched off. SRAM and register + contents are lost except for the Backup domain (RTC registers, RTC backup + registers and Standby circuitry). + + [..] The voltage regulator is OFF. + + (+) Entry: + (++) The Standby mode is entered using the PWR_EnterSTANDBYMode() function. + (+) Exit: + (++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup, + tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] The MCU can be woken up from low-power mode by an RTC Alarm event, a tamper + event, a time-stamp event, or a comparator event, without depending on an + external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop mode + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to: + (+++) Configure the EXTI Line 17 to be sensitive to rising edges (Interrupt + or Event modes) using the EXTI_Init() function. + (+++) Enable the RTC Alarm Interrupt using the RTC_ITConfig() function + (+++) Configure the RTC to generate the RTC alarm using the RTC_SetAlarm() + and RTC_AlarmCmd() functions. + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to: + (+++) Configure the EXTI Line 19 to be sensitive to rising edges (Interrupt + or Event modes) using the EXTI_Init() function. + (+++) Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig() + function. + (+++) Configure the RTC to detect the tamper or time stamp event using the + RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd() + functions. + + (+) RTC auto-wakeup (AWU) from the Standby mode + (++) To wake up from the Standby mode with an RTC alarm event, it is necessary to: + (+++) Enable the RTC Alarm Interrupt using the RTC_ITConfig() function. + (+++) Configure the RTC to generate the RTC alarm using the RTC_SetAlarm() + and RTC_AlarmCmd() functions. + (++) To wake up from the Standby mode with an RTC Tamper or time stamp event, it + is necessary to: + (+++) Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig() + function. + (+++) Configure the RTC to detect the tamper or time stamp event using the + RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd() + functions. + + (+) Comparator auto-wakeup (AWU) from the Stop mode + (++) To wake up from the Stop mode with an comparator 1 or comparator 2 wakeup + event, it is necessary to: + (+++) Configure the EXTI Line 21 for comparator 1 or EXTI Line 22 for comparator 2 + to be sensitive to to the selected edges (falling, rising or falling + and rising) (Interrupt or Event modes) using the EXTI_Init() function. + (+++) Configure the comparator to generate the event. + +@endverbatim + * @{ + */ + +/** + * @brief Enters Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @param PWR_SLEEPEntry: specifies if SLEEP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_SLEEPEntry_WFI: enter SLEEP mode with WFI instruction + * @arg PWR_SLEEPEntry_WFE: enter SLEEP mode with WFE instruction + * @retval None + */ +void PWR_EnterSleepMode(uint8_t PWR_SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_SLEEP_ENTRY(PWR_SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex-M0 System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(PWR_SLEEPEntry == PWR_SLEEPEntry_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + +/** + * @brief Enters STOP mode. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * @param PWR_Regulator: specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_Regulator_ON: STOP mode with regulator ON + * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode + * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction + * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction + @arg PWR_STOPEntry_SLEEPONEXIT: enter STOP mode with SLEEPONEXIT instruction + * @retval None + */ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(PWR_Regulator)); + assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + /* Clear PDDS and LPDSR bits */ + tmpreg &= CR_DS_MASK; + + /* Set LPDSR bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator; + + /* Store the new value */ + PWR->CR = tmpreg; + + /* Set SLEEPDEEP bit of Cortex-M0 System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* Select STOP mode entry --------------------------------------------------*/ + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + } + else if (PWR_STOPEntry == PWR_STOPEntry_WFE) + { + /* Request Wait For Event */ + __WFE(); + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + } + else + { + /* Set SLEEP on exit bit of Cortex-M0 System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPONEXIT_Msk; + } +} + +/** + * @brief Enters STANDBY mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - RTC_AF1 pin (PC13) if configured for Wakeup pin 2 (WKUP2), tamper, + * time-stamp, RTC Alarm out, or RTC clock calibration out. + * - WKUP pin 1 (PA0) if enabled. + * @note The Wakeup flag (WUF) need to be cleared at application level before to call this function + * @param None + * @retval None + */ +void PWR_EnterSTANDBYMode(void) +{ + /* Select STANDBY mode */ + PWR->CR |= PWR_CR_PDDS; + + /* Set SLEEPDEEP bit of Cortex-M0 System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @} + */ + +/** @defgroup PWR_Group5 Flags management functions + * @brief Flags management functions + * +@verbatim + ============================================================================== + ##### Flags management functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified PWR flag is set or not. + * @param PWR_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup + * event was received from the WKUP pin or from the RTC alarm + * (Alarm A or Alarm B), RTC Tamper event or RTC TimeStamp event. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the + * system was resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD + * is enabled by the PWR_PVDCmd() function. + * @arg PWR_FLAG_VREFINTRDY: Internal Voltage Reference Ready flag. + * This flag indicates the state of the internal voltage + * reference, VREFINT. + * @retval The new state of PWR_FLAG (SET or RESET). + */ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); + + if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the PWR's pending flags. + * @param PWR_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @retval None + */ +void PWR_ClearFlag(uint32_t PWR_FLAG) +{ + /* Check the parameters */ + assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); + + PWR->CR |= PWR_FLAG << 2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_rcc.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_rcc.c new file mode 100644 index 0000000..930f1a9 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_rcc.c @@ -0,0 +1,1775 @@ +/** + ****************************************************************************** + * @file stm32f0xx_rcc.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Reset and clock control (RCC) peripheral: + * + Internal/external clocks, PLL, CSS and MCO configuration + * + System, AHB and APB busses clocks configuration + * + Peripheral clocks configuration + * + Interrupts and flags management + * + @verbatim + + =============================================================================== + ##### RCC specific features ##### + =============================================================================== + [..] After reset the device is running from HSI (8 MHz) with Flash 0 WS, + all peripherals are off except internal SRAM, Flash and SWD. + (#) There is no prescaler on High speed (AHB) and Low speed (APB) busses; + all peripherals mapped on these busses are running at HSI speed. + (#) The clock for all peripherals is switched off, except the SRAM and FLASH. + (#) All GPIOs are in input floating state, except the SWD pins which + are assigned to be used for debug purpose. + [..] Once the device started from reset, the user application has to: + (#) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (#) Configure the System clock frequency and Flash settings + (#) Configure the AHB and APB busses prescalers + (#) Enable the clock for the peripheral(s) to be used + (#) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (ADC, CEC, I2C, USART, RTC and IWDG) + + @endverbatim + + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ---------------------- RCC registers mask -------------------------------- */ +/* RCC Flag Mask */ +#define FLAG_MASK ((uint8_t)0x1F) + +/* CR register byte 2 (Bits[23:16]) base address */ +#define CR_BYTE2_ADDRESS ((uint32_t)0x40021002) + +/* CFGR register byte 3 (Bits[31:23]) base address */ +#define CFGR_BYTE3_ADDRESS ((uint32_t)0x40021007) + +/* CIR register byte 1 (Bits[15:8]) base address */ +#define CIR_BYTE1_ADDRESS ((uint32_t)0x40021009) + +/* CIR register byte 2 (Bits[23:16]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)0x4002100A) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** @defgroup RCC_Group1 Internal and external clocks, PLL, CSS and MCO configuration functions + * @brief Internal and external clocks, PLL, CSS and MCO configuration functions + * +@verbatim + =============================================================================== + ##### Internal-external clocks, PLL, CSS and MCO configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to configure the internal/external clocks, + PLL, CSS and MCO. + (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly + or through the PLL as System clock source. + The HSI clock can be used also to clock the USART, I2C and CEC peripherals. + (#) HSI14 (high-speed internal for ADC), 14 MHz factory-trimmed RC used to clock + the ADC peripheral. + (#) LSI (low-speed internal), 40 KHz low consumption RC used as IWDG and/or RTC + clock source. + (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + LSE can be used also to clock the USART and CEC peripherals. + (#) PLL (clocked by HSI or HSE), for System clock. + (#) CSS (Clock security system), once enabled and if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M0 NMI (Non-Maskable Interrupt) + exception vector. + (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSI14, LSI, + HSE, LSE or PLL (divided by 2) clock on PA8 pin. + +@endverbatim + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * @note HSI ON and used as system clock source + * @note HSI14, HSE and PLL OFF + * @note AHB, APB prescaler set to 1. + * @note CSS and MCO OFF + * @note All interrupts disabled + * @note However, this function doesn't modify the configuration of the + * @note Peripheral clocks + * @note LSI, LSE and RTC clocks + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + +#if defined (STM32F051) + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0] and MCOSEL[2:0] bits */ + RCC->CFGR &= (uint32_t)0xF8FFB80C; +#else + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, MCOSEL[2:0], MCOPRE[2:0] and PLLNODIV bits */ + RCC->CFGR &= (uint32_t)0x08FFB80C; +#endif /* STM32F051 */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + RCC->CFGR &= (uint32_t)0xFFC0FFFF; + + /* Reset PREDIV1[3:0] bits */ + RCC->CFGR2 &= (uint32_t)0xFFFFFFF0; + + /* Reset USARTSW[1:0], I2CSW, CECSW and ADCSW bits */ + RCC->CFGR3 &= (uint32_t)0xFFF0FEAC; + + /* Reset HSI14 bit */ + RCC->CR2 &= (uint32_t)0xFFFFFFFE; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function resets the CSSON bit, so if the Clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg RCC_HSE_ON: turn ON the HSE oscillator + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint8_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + *(__IO uint8_t *) CR_BYTE2_ADDRESS = RCC_HSE_OFF; + + /* Set the new HSE configuration -------------------------------------------*/ + *(__IO uint8_t *) CR_BYTE2_ADDRESS = RCC_HSE; + +} + +/** + * @brief Waits for HSE start-up. + * @note This function waits on HSERDY flag to be set and return SUCCESS if + * this flag is set, otherwise returns ERROR if the timeout is reached + * and this flag is not set. The timeout value is defined by the constant + * HSE_STARTUP_TIMEOUT in stm32f0xx.h file. You can tailor it depending + * on the HSE crystal used in your application. + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + ErrorStatus status = ERROR; + FlagStatus HSEStatus = RESET; + + /* Wait till HSE is ready and if timeout is reached exit */ + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * Refer to the Application Note AN4067 for more details on how to + * calibrate the HSI. + * @param HSICalibrationValue: specifies the HSI calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(HSICalibrationValue)); + + tmpreg = RCC->CR; + + /* Clear HSITRIM[4:0] bits */ + tmpreg &= ~RCC_CR_HSITRIM; + + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note After enabling the HSI, the application software should wait on + * HSIRDY flag to be set indicating that HSI clock is stable and can + * be used to clock the PLL and/or system clock. + * @note HSI can not be stopped if it is used directly or through the PLL + * as system clock. In this case, you have to select another source + * of the system clock then stop the HSI. + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @param NewState: new state of the HSI. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CR |= RCC_CR_HSION; + } + else + { + RCC->CR &= ~RCC_CR_HSION; + } +} + +/** + * @brief Adjusts the Internal High Speed oscillator for ADC (HSI14) + * calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * Refer to the Application Note AN4067 for more details on how to + * calibrate the HSI14. + * @param HSI14CalibrationValue: specifies the HSI14 calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSI14CalibrationValue(uint8_t HSI14CalibrationValue) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_HSI14_CALIBRATION_VALUE(HSI14CalibrationValue)); + + tmpreg = RCC->CR2; + + /* Clear HSI14TRIM[4:0] bits */ + tmpreg &= ~RCC_CR2_HSI14TRIM; + + /* Set the HSITRIM14[4:0] bits according to HSI14CalibrationValue value */ + tmpreg |= (uint32_t)HSI14CalibrationValue << 3; + + /* Store the new value */ + RCC->CR2 = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator for ADC (HSI14). + * @note After enabling the HSI14, the application software should wait on + * HSIRDY flag to be set indicating that HSI clock is stable and can + * be used to clock the ADC. + * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes. + * @param NewState: new state of the HSI14. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator + * clock cycles. + * @retval None + */ +void RCC_HSI14Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CR2 |= RCC_CR2_HSI14ON; + } + else + { + RCC->CR2 &= ~RCC_CR2_HSI14ON; + } +} + +/** + * @brief Enables or disables the Internal High Speed oscillator request from ADC. + * @param NewState: new state of the HSI14 ADC request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSI14ADCRequestCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CR2 &= ~RCC_CR2_HSI14DIS; + } + else + { + RCC->CR2 |= RCC_CR2_HSI14DIS; + } +} + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @note As the LSE is in the Backup domain and write access is denied to this + * domain after reset, you have to enable write access using + * PWR_BackupAccessCmd(ENABLE) function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_Bypass), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @note Care must be taken when using this function to configure LSE mode + * as it clears systematically the LSEON bit before any new configuration. + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg RCC_LSE_ON: turn ON the LSE oscillator + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint32_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + RCC->BDCR &= ~(RCC_BDCR_LSEON); + + /* Reset LSEBYP bit */ + RCC->BDCR &= ~(RCC_BDCR_LSEBYP); + + /* Configure LSE */ + RCC->BDCR |= RCC_LSE; +} + +/** + * @brief Configures the External Low Speed oscillator (LSE) drive capability. + * @param RCC_LSEDrive: specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg RCC_LSEDrive_Low: LSE oscillator low drive capability. + * @arg RCC_LSEDrive_MediumLow: LSE oscillator medium low drive capability. + * @arg RCC_LSEDrive_MediumHigh: LSE oscillator medium high drive capability. + * @arg RCC_LSEDrive_High: LSE oscillator high drive capability. + * @retval None + */ +void RCC_LSEDriveConfig(uint32_t RCC_LSEDrive) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE_DRIVE(RCC_LSEDrive)); + + /* Clear LSEDRV[1:0] bits */ + RCC->BDCR &= ~(RCC_BDCR_LSEDRV); + + /* Set the LSE Drive */ + RCC->BDCR |= RCC_LSEDrive; +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. + * This parameter can be: ENABLE or DISABLE. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CSR |= RCC_CSR_LSION; + } + else + { + RCC->CSR &= ~RCC_CSR_LSION; + } +} + +/** + * @brief Configures the PLL clock source and multiplication factor. + * @note This function must be used only when the PLL is disabled. + * + * @param RCC_PLLSource: specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock selected as PLL clock source + * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry + * @arg RCC_PLLSource_HSI48 HSI48 oscillator clock selected as PLL clock source, applicable only for STM32F072 devices + * @arg RCC_PLLSource_HSI: HSI clock selected as PLL clock entry, applicable only for STM32F072 devices + * @note The minimum input clock frequency for PLL is 2 MHz (when using HSE as + * PLL source). + * + * @param RCC_PLLMul: specifies the PLL multiplication factor, which drive the PLLVCO clock + * This parameter can be RCC_PLLMul_x where x:[2,16] + * + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); + + /* Clear PLL Source [16] and Multiplier [21:18] bits */ + RCC->CFGR &= ~(RCC_CFGR_PLLMULL | RCC_CFGR_PLLSRC); + + /* Set the PLL Source and Multiplier */ + RCC->CFGR |= (uint32_t)(RCC_PLLSource | RCC_PLLMul); +} + +/** + * @brief Enables or disables the PLL. + * @note After enabling the PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The PLL can not be disabled if it is used as system clock source + * @note The PLL is disabled by hardware when entering STOP and STANDBY modes. + * @param NewState: new state of the PLL. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CR |= RCC_CR_PLLON; + } + else + { + RCC->CR &= ~RCC_CR_PLLON; + } +} + +/** + * @brief Enables or disables the Internal High Speed oscillator for USB (HSI48). + * This function is only applicable for STM32F072 devices. + * @note After enabling the HSI48, the application software should wait on + * HSI48RDY flag to be set indicating that HSI48 clock is stable and can + * be used to clock the USB. + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @param NewState: new state of the HSI48. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSI48Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CR2 |= RCC_CR2_HSI48ON; + } + else + { + RCC->CR2 &= ~RCC_CR2_HSI48ON; + } +} + +/** + * @brief Configures the PREDIV1 division factor. + * @note This function must be used only when the PLL is disabled. + * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. + * This parameter can be RCC_PREDIV1_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV1[3:0] bits */ + tmpreg &= ~(RCC_CFGR2_PREDIV1); + /* Set the PREDIV1 division factor */ + tmpreg |= RCC_PREDIV1_Div; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + +/** + * @brief Enables or disables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector. + * @param NewState: new state of the Clock Security System. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->CR |= RCC_CR_CSSON; + } + else + { + RCC->CR &= ~RCC_CR_CSSON; + } +} + +#ifdef STM32F051 +/** + * @brief Selects the clock source to output on MCO pin (PA8). + * @note PA8 should be configured in alternate function mode. + * @param RCC_MCOSource: specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCOSource_NoClock: No clock selected. + * @arg RCC_MCOSource_HSI14: HSI14 oscillator clock selected. + * @arg RCC_MCOSource_LSI: LSI oscillator clock selected. + * @arg RCC_MCOSource_LSE: LSE oscillator clock selected. + * @arg RCC_MCOSource_SYSCLK: System clock selected. + * @arg RCC_MCOSource_HSI: HSI oscillator clock selected. + * @arg RCC_MCOSource_HSE: HSE oscillator clock selected. + * @arg RCC_MCOSource_PLLCLK_Div2: PLL clock divided by 2 selected. + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCOSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_MCO_SOURCE(RCC_MCOSource)); + + /* Select MCO clock source and prescaler */ + *(__IO uint8_t *) CFGR_BYTE3_ADDRESS = RCC_MCOSource; +} +#else + +/** + * @brief Selects the clock source to output on MCO pin (PA8) and the corresponding + * prescsaler. + * @note PA8 should be configured in alternate function mode. + * @param RCC_MCOSource: specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCOSource_NoClock: No clock selected. + * @arg RCC_MCOSource_HSI14: HSI14 oscillator clock selected. + * @arg RCC_MCOSource_LSI: LSI oscillator clock selected. + * @arg RCC_MCOSource_LSE: LSE oscillator clock selected. + * @arg RCC_MCOSource_SYSCLK: System clock selected. + * @arg RCC_MCOSource_HSI: HSI oscillator clock selected. + * @arg RCC_MCOSource_HSE: HSE oscillator clock selected. + * @arg RCC_MCOSource_PLLCLK_Div2: PLL clock divided by 2 selected. + * @arg RCC_MCOSource_PLLCLK: PLL clock selected. + * @arg RCC_MCOSource_HSI48: HSI48 clock selected. + * @param RCC_MCOPrescaler: specifies the prescaler on MCO pin. + * This parameter can be one of the following values: + * @arg RCC_MCOPrescaler_1: MCO clock is divided by 1. + * @arg RCC_MCOPrescaler_2: MCO clock is divided by 2. + * @arg RCC_MCOPrescaler_4: MCO clock is divided by 4. + * @arg RCC_MCOPrescaler_8: MCO clock is divided by 8. + * @arg RCC_MCOPrescaler_16: MCO clock is divided by 16. + * @arg RCC_MCOPrescaler_32: MCO clock is divided by 32. + * @arg RCC_MCOPrescaler_64: MCO clock is divided by 64. + * @arg RCC_MCOPrescaler_128: MCO clock is divided by 128. + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCOSource, uint32_t RCC_MCOPrescaler) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_MCO_SOURCE(RCC_MCOSource)); + assert_param(IS_RCC_MCO_PRESCALER(RCC_MCOPrescaler)); + + /* Get CFGR value */ + tmpreg = RCC->CFGR; + /* Clear MCOPRE[2:0] bits */ + tmpreg &= ~(RCC_CFGR_MCO_PRE | RCC_CFGR_MCO | RCC_CFGR_PLLNODIV); + /* Set the RCC_MCOSource and RCC_MCOPrescaler */ + tmpreg |= (RCC_MCOPrescaler | ((uint32_t)RCC_MCOSource<<24)); + /* Store the new value */ + RCC->CFGR = tmpreg; +} +#endif /* STM32F072 */ + +/** + * @} + */ + +/** @defgroup RCC_Group2 System AHB and APB busses clocks configuration functions + * @brief System, AHB and APB busses clocks configuration functions + * +@verbatim + =============================================================================== + ##### System, AHB and APB busses clocks configuration functions ##### + =============================================================================== + + [..] This section provide functions allowing to configure the System, AHB and + APB busses clocks. + (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable prescaler + and used to clock the CPU, memory and peripherals mapped on AHB bus (DMA and GPIO). + and APB (PCLK) clocks are derived from AHB clock through + configurable prescalers and used to clock the peripherals mapped on these busses. + You can use "RCC_GetClocksFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + (+@) The ADC clock which is derived from HSI14 or APB (APB divided by a + programmable prescaler: 2 or 4). + (+@) The CEC clock which is derived from LSE or HSI divided by 244. + (+@) The I2C clock which is derived from HSI or system clock (SYSCLK). + (+@) The USART clock which is derived from HSI, system clock (SYSCLK), APB or LSE. + (+@) The RTC/LCD clock which is derived from the LSE, LSI or 2 MHz HSE_RTC (HSE + divided by a programmable prescaler). + The System clock (SYSCLK) frequency must be higher or equal to the RTC/LCD + clock frequency. + (+@) IWDG clock which is always the LSI clock. + + (#) The maximum frequency of the SYSCLK, HCLK and PCLK is 48 MHz. + Depending on the maximum frequency, the FLASH wait states (WS) should be + adapted accordingly: + +--------------------------------------------- + + | Wait states | HCLK clock frequency (MHz) | + |---------------|------------------------------| + |0WS(1CPU cycle)| 0 < HCLK <= 24 | + |---------------|------------------------------| + |1WS(2CPU cycle)| 24 < HCLK <= 48 | + +----------------------------------------------+ + + (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and + prefetch is disabled. + + [..] It is recommended to use the following software sequences to tune the number + of wait states needed to access the Flash memory with the CPU frequency (HCLK). + (+) Increasing the CPU frequency + (++) Program the Flash Prefetch buffer, using "FLASH_PrefetchBufferCmd(ENABLE)" + function + (++) Check that Flash Prefetch buffer activation is taken into account by + reading FLASH_ACR using the FLASH_GetPrefetchBufferStatus() function + (++) Program Flash WS to 1, using "FLASH_SetLatency(FLASH_Latency_1)" function + (++) Check that the new number of WS is taken into account by reading FLASH_ACR + (++) Modify the CPU clock source, using "RCC_SYSCLKConfig()" function + (++) If needed, modify the CPU clock prescaler by using "RCC_HCLKConfig()" function + (++) Check that the new CPU clock source is taken into account by reading + the clock source status, using "RCC_GetSYSCLKSource()" function + (+) Decreasing the CPU frequency + (++) Modify the CPU clock source, using "RCC_SYSCLKConfig()" function + (++) If needed, modify the CPU clock prescaler by using "RCC_HCLKConfig()" function + (++) Check that the new CPU clock source is taken into account by reading + the clock source status, using "RCC_GetSYSCLKSource()" function + (++) Program the new number of WS, using "FLASH_SetLatency()" function + (++) Check that the new number of WS is taken into account by reading FLASH_ACR + (++) Disable the Flash Prefetch buffer using "FLASH_PrefetchBufferCmd(DISABLE)" + function + (++) Check that Flash Prefetch buffer deactivation is taken into account by reading FLASH_ACR + using the FLASH_GetPrefetchBufferStatus() function. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the system clock (SYSCLK). + * @note The HSI is used (enabled by hardware) as system clock source after + * startup from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use RCC_GetSYSCLKSource() function to know which clock is + * currently used as system clock source. + * @param RCC_SYSCLKSource: specifies the clock source used as system clock source + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock source + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock source + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock source + * @arg RCC_SYSCLKSource_HSI48: HSI48 selected as system clock source, applicable only for STM32F072 devices + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + + tmpreg = RCC->CFGR; + + /* Clear SW[1:0] bits */ + tmpreg &= ~RCC_CFGR_SW; + + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can be one + * of the following values: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + * - 0x0C: HSI48 used as system clock, applicable only for STM32F072 devices + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & RCC_CFGR_SWS)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + + tmpreg = RCC->CFGR; + + /* Clear HPRE[3:0] bits */ + tmpreg &= ~RCC_CFGR_HPRE; + + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the APB clock (PCLK). + * @param RCC_HCLK: defines the APB clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB clock = HCLK + * @arg RCC_HCLK_Div2: APB clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB clock = HCLK/16 + * @retval None + */ +void RCC_PCLKConfig(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + + tmpreg = RCC->CFGR; + + /* Clear PPRE[2:0] bits */ + tmpreg &= ~RCC_CFGR_PPRE; + + /* Set PPRE[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the ADC clock (ADCCLK). + * @note This function is obsolete. + * For proper ADC clock selection, refer to ADC_ClockModeConfig() in the ADC driver + * @param RCC_ADCCLK: defines the ADC clock source. This clock is derived + * from the HSI14 or APB clock (PCLK). + * This parameter can be one of the following values: + * @arg RCC_ADCCLK_HSI14: ADC clock = HSI14 (14MHz) + * @arg RCC_ADCCLK_PCLK_Div2: ADC clock = PCLK/2 + * @arg RCC_ADCCLK_PCLK_Div4: ADC clock = PCLK/4 + * @retval None + */ +void RCC_ADCCLKConfig(uint32_t RCC_ADCCLK) +{ + /* Check the parameters */ + assert_param(IS_RCC_ADCCLK(RCC_ADCCLK)); + + /* Clear ADCPRE bit */ + RCC->CFGR &= ~RCC_CFGR_ADCPRE; + /* Set ADCPRE bits according to RCC_PCLK value */ + RCC->CFGR |= RCC_ADCCLK & 0xFFFF; + + /* Clear ADCSW bit */ + RCC->CFGR3 &= ~RCC_CFGR3_ADCSW; + /* Set ADCSW bits according to RCC_ADCCLK value */ + RCC->CFGR3 |= RCC_ADCCLK >> 16; +} + +/** + * @brief Configures the CEC clock (CECCLK). + * @param RCC_CECCLK: defines the CEC clock source. This clock is derived + * from the HSI or LSE clock. + * This parameter can be one of the following values: + * @arg RCC_CECCLK_HSI_Div244: CEC clock = HSI/244 (32768Hz) + * @arg RCC_CECCLK_LSE: CEC clock = LSE + * @retval None + */ +void RCC_CECCLKConfig(uint32_t RCC_CECCLK) +{ + /* Check the parameters */ + assert_param(IS_RCC_CECCLK(RCC_CECCLK)); + + /* Clear CECSW bit */ + RCC->CFGR3 &= ~RCC_CFGR3_CECSW; + /* Set CECSW bits according to RCC_CECCLK value */ + RCC->CFGR3 |= RCC_CECCLK; +} + +/** + * @brief Configures the I2C1 clock (I2C1CLK). + * @param RCC_I2CCLK: defines the I2C1 clock source. This clock is derived + * from the HSI or System clock. + * This parameter can be one of the following values: + * @arg RCC_I2C1CLK_HSI: I2C1 clock = HSI + * @arg RCC_I2C1CLK_SYSCLK: I2C1 clock = System Clock + * @retval None + */ +void RCC_I2CCLKConfig(uint32_t RCC_I2CCLK) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2CCLK(RCC_I2CCLK)); + + /* Clear I2CSW bit */ + RCC->CFGR3 &= ~RCC_CFGR3_I2C1SW; + /* Set I2CSW bits according to RCC_I2CCLK value */ + RCC->CFGR3 |= RCC_I2CCLK; +} + +/** + * @brief Configures the USART1 clock (USART1CLK). + * @param RCC_USARTCLK: defines the USART clock source. This clock is derived + * from the HSI or System clock. + * This parameter can be one of the following values: + * @arg RCC_USART1CLK_PCLK: USART1 clock = APB Clock (PCLK) + * @arg RCC_USART1CLK_SYSCLK: USART1 clock = System Clock + * @arg RCC_USART1CLK_LSE: USART1 clock = LSE Clock + * @arg RCC_USART1CLK_HSI: USART1 clock = HSI Clock + * @arg RCC_USART2CLK_PCLK: USART2 clock = APB Clock (PCLK), applicable only for STM32F072 and STM32F091 devices + * @arg RCC_USART2CLK_SYSCLK: USART2 clock = System Clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_USART2CLK_LSE: USART2 clock = LSE Clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_USART2CLK_HSI: USART2 clock = HSI Clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_USART3CLK_PCLK: USART3 clock = APB Clock (PCLK), applicable only for STM32F091 devices + * @arg RCC_USART3CLK_SYSCLK: USART3 clock = System Clock, applicable only for STM32F091 devices + * @arg RCC_USART3CLK_LSE: USART3 clock = LSE Clock, applicable only for STM32F091 devices + * @arg RCC_USART3CLK_HSI: USART3 clock = HSI Clock, applicable only for STM32F091 devices + * @retval None + */ +void RCC_USARTCLKConfig(uint32_t RCC_USARTCLK) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RCC_USARTCLK(RCC_USARTCLK)); + + /* Get USART index */ + tmp = (RCC_USARTCLK >> 28); + + /* Clear USARTSW[1:0] bit */ + if (tmp == (uint32_t)0x00000001) + { + /* Clear USART1SW[1:0] bit */ + RCC->CFGR3 &= ~RCC_CFGR3_USART1SW; + } + else if (tmp == (uint32_t)0x00000002) + { + /* Clear USART2SW[1:0] bit */ + RCC->CFGR3 &= ~RCC_CFGR3_USART2SW; + } + else + { + /* Clear USART3SW[1:0] bit */ + RCC->CFGR3 &= ~RCC_CFGR3_USART3SW; + } + + /* Set USARTxSW bits according to RCC_USARTCLK value */ + RCC->CFGR3 |= RCC_USARTCLK; +} + +/** + * @brief Configures the USB clock (USBCLK). + * This function is only applicable for STM32F072 devices. + * @param RCC_USBCLK: defines the USB clock source. This clock is derived + * from the HSI48 or system clock. + * This parameter can be one of the following values: + * @arg RCC_USBCLK_HSI48: USB clock = HSI48 + * @arg RCC_USBCLK_PLLCLK: USB clock = PLL clock + * @retval None + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLK) +{ + /* Check the parameters */ + assert_param(IS_RCC_USBCLK(RCC_USBCLK)); + + /* Clear USBSW bit */ + RCC->CFGR3 &= ~RCC_CFGR3_USBSW; + /* Set USBSW bits according to RCC_USBCLK value */ + RCC->CFGR3 |= RCC_USBCLK; +} + +/** + * @brief Returns the frequencies of the System, AHB and APB busses clocks. + * @note The frequency returned by this function is not the real frequency + * in the chip. It is calculated based on the predefined constant and + * the source selected by RCC_SYSCLKConfig(): + * + * @note If SYSCLK source is HSI, function returns constant HSI_VALUE(*) + * + * @note If SYSCLK source is HSE, function returns constant HSE_VALUE(**) + * + * @note If SYSCLK source is PLL, function returns constant HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * @note If SYSCLK source is HSI48, function returns constant HSI48_VALUE(***) + * + * @note (*) HSI_VALUE is a constant defined in stm32f0xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature, refer to RCC_AdjustHSICalibrationValue(). + * + * @note (**) HSE_VALUE is a constant defined in stm32f0xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * return wrong result. + * + * @note (***) HSI48_VALUE is a constant defined in stm32f0xx.h file (default value + * 48 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * @note Each time SYSCLK, HCLK and/or PCLK clock changes, this function + * must be called to update the structure's field. Otherwise, any + * configuration based on this function will be incorrect. + * + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, prediv1factor = 0, presc = 0, pllclk = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + pllclk = (HSI_VALUE >> 1) * pllmull; + } + else + { + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + pllclk = (HSE_VALUE / prediv1factor) * pllmull; + } + RCC_Clocks->SYSCLK_Frequency = pllclk; + break; + case 0x0C: /* HSI48 used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI48_VALUE; + break; + default: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + /* Compute HCLK, PCLK clocks frequencies -----------------------------------*/ + /* Get HCLK prescaler */ + tmp = RCC->CFGR & RCC_CFGR_HPRE; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + + /* Get PCLK prescaler */ + tmp = RCC->CFGR & RCC_CFGR_PPRE; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + /* PCLK clock frequency */ + RCC_Clocks->PCLK_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + + /* ADCCLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_ADCSW) != RCC_CFGR3_ADCSW) + { + /* ADC Clock is HSI14 Osc. */ + RCC_Clocks->ADCCLK_Frequency = HSI14_VALUE; + } + else + { + if((RCC->CFGR & RCC_CFGR_ADCPRE) != RCC_CFGR_ADCPRE) + { + /* ADC Clock is derived from PCLK/2 */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK_Frequency >> 1; + } + else + { + /* ADC Clock is derived from PCLK/4 */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK_Frequency >> 2; + } + + } + + /* CECCLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_CECSW) != RCC_CFGR3_CECSW) + { + /* CEC Clock is HSI/244 */ + RCC_Clocks->CECCLK_Frequency = HSI_VALUE / 244; + } + else + { + /* CECC Clock is LSE Osc. */ + RCC_Clocks->CECCLK_Frequency = LSE_VALUE; + } + + /* I2C1CLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_I2C1SW) != RCC_CFGR3_I2C1SW) + { + /* I2C1 Clock is HSI Osc. */ + RCC_Clocks->I2C1CLK_Frequency = HSI_VALUE; + } + else + { + /* I2C1 Clock is System Clock */ + RCC_Clocks->I2C1CLK_Frequency = RCC_Clocks->SYSCLK_Frequency; + } + + /* USART1CLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_USART1SW) == 0x0) + { + /* USART1 Clock is PCLK */ + RCC_Clocks->USART1CLK_Frequency = RCC_Clocks->PCLK_Frequency; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART1SW) == RCC_CFGR3_USART1SW_0) + { + /* USART1 Clock is System Clock */ + RCC_Clocks->USART1CLK_Frequency = RCC_Clocks->SYSCLK_Frequency; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART1SW) == RCC_CFGR3_USART1SW_1) + { + /* USART1 Clock is LSE Osc. */ + RCC_Clocks->USART1CLK_Frequency = LSE_VALUE; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART1SW) == RCC_CFGR3_USART1SW) + { + /* USART1 Clock is HSI Osc. */ + RCC_Clocks->USART1CLK_Frequency = HSI_VALUE; + } + + /* USART2CLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_USART2SW) == 0x0) + { + /* USART Clock is PCLK */ + RCC_Clocks->USART2CLK_Frequency = RCC_Clocks->PCLK_Frequency; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART2SW) == RCC_CFGR3_USART2SW_0) + { + /* USART Clock is System Clock */ + RCC_Clocks->USART2CLK_Frequency = RCC_Clocks->SYSCLK_Frequency; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART2SW) == RCC_CFGR3_USART2SW_1) + { + /* USART Clock is LSE Osc. */ + RCC_Clocks->USART2CLK_Frequency = LSE_VALUE; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART2SW) == RCC_CFGR3_USART2SW) + { + /* USART Clock is HSI Osc. */ + RCC_Clocks->USART2CLK_Frequency = HSI_VALUE; + } + + /* USART3CLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_USART3SW) == 0x0) + { + /* USART Clock is PCLK */ + RCC_Clocks->USART3CLK_Frequency = RCC_Clocks->PCLK_Frequency; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART3SW) == RCC_CFGR3_USART3SW_0) + { + /* USART Clock is System Clock */ + RCC_Clocks->USART3CLK_Frequency = RCC_Clocks->SYSCLK_Frequency; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART3SW) == RCC_CFGR3_USART3SW_1) + { + /* USART Clock is LSE Osc. */ + RCC_Clocks->USART3CLK_Frequency = LSE_VALUE; + } + else if((RCC->CFGR3 & RCC_CFGR3_USART3SW) == RCC_CFGR3_USART3SW) + { + /* USART Clock is HSI Osc. */ + RCC_Clocks->USART3CLK_Frequency = HSI_VALUE; + } + + /* USBCLK clock frequency */ + if((RCC->CFGR3 & RCC_CFGR3_USBSW) != RCC_CFGR3_USBSW) + { + /* USB Clock is HSI48 */ + RCC_Clocks->USBCLK_Frequency = HSI48_VALUE; + } + else + { + /* USB Clock is PLL clock */ + RCC_Clocks->USBCLK_Frequency = pllclk; + } +} + +/** + * @} + */ + +/** @defgroup RCC_Group3 Peripheral clocks configuration functions + * @brief Peripheral clocks configuration functions + * +@verbatim + =============================================================================== + #####Peripheral clocks configuration functions ##### + =============================================================================== + + [..] This section provide functions allowing to configure the Peripheral clocks. + (#) The RTC clock which is derived from the LSE, LSI or HSE_Div32 (HSE + divided by 32). + (#) After restart from Reset or wakeup from STANDBY, all peripherals are off + except internal SRAM, Flash and SWD. Before to start using a peripheral you + have to enable its interface clock. You can do this using RCC_AHBPeriphClockCmd(), + RCC_APB2PeriphClockCmd() and RCC_APB1PeriphClockCmd() functions. + (#) To reset the peripherals configuration (to the default state after device reset) + you can use RCC_AHBPeriphResetCmd(), RCC_APB2PeriphResetCmd() and + RCC_APB1PeriphResetCmd() functions. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using PWR_BackupAccessCmd(ENABLE) function before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the RTC + * is reset using RCC_BackupResetCmd function, or by a Power On Reset (POR) + * + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Div32: HSE divided by 32 selected as RTC clock + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * + * @note The maximum input clock frequency for RTC is 2MHz (when using HSE as + * RTC clock source). + * + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + + /* Select the RTC clock source */ + RCC->BDCR |= RCC_RTCCLKSource; +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock source was selected + * using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->BDCR |= RCC_BDCR_RTCEN; + } + else + { + RCC->BDCR &= ~RCC_BDCR_RTCEN; + } +} + +/** + * @brief Forces or releases the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->BDCR |= RCC_BDCR_BDRST; + } + else + { + RCC->BDCR &= ~RCC_BDCR_BDRST; + } +} + +/** + * @brief Enables or disables the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_GPIOA: GPIOA clock + * @arg RCC_AHBPeriph_GPIOB: GPIOB clock + * @arg RCC_AHBPeriph_GPIOC: GPIOC clock + * @arg RCC_AHBPeriph_GPIOD: GPIOD clock + * @arg RCC_AHBPeriph_GPIOE: GPIOE clock, applicable only for STM32F072 devices + * @arg RCC_AHBPeriph_GPIOF: GPIOF clock + * @arg RCC_AHBPeriph_TS: TS clock + * @arg RCC_AHBPeriph_CRC: CRC clock + * @arg RCC_AHBPeriph_FLITF: (has effect only when the Flash memory is in power down mode) + * @arg RCC_AHBPeriph_SRAM: SRAM clock + * @arg RCC_AHBPeriph_DMA1: DMA1 clock + * @arg RCC_AHBPeriph_DMA2: DMA2 clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBENR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock + * @arg RCC_APB2Periph_USART6: USART6 clock + * @arg RCC_APB2Periph_USART7: USART7 clock + * @arg RCC_APB2Periph_USART8: USART8 clock + * @arg RCC_APB2Periph_ADC1: ADC1 clock + * @arg RCC_APB2Periph_TIM1: TIM1 clock + * @arg RCC_APB2Periph_SPI1: SPI1 clock + * @arg RCC_APB2Periph_USART1: USART1 clock + * @arg RCC_APB2Periph_TIM15: TIM15 clock + * @arg RCC_APB2Periph_TIM16: TIM16 clock + * @arg RCC_APB2Periph_TIM17: TIM17 clock + * @arg RCC_APB2Periph_DBGMCU: DBGMCU clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2: TIM2 clock, applicable only for STM32F051 and STM32F072 devices + * @arg RCC_APB1Periph_TIM3: TIM3 clock + * @arg RCC_APB1Periph_TIM6: TIM6 clock + * @arg RCC_APB1Periph_TIM7: TIM7 clock, applicable only for STM32F072 devices + * @arg RCC_APB1Periph_TIM14: TIM14 clock + * @arg RCC_APB1Periph_WWDG: WWDG clock + * @arg RCC_APB1Periph_SPI2: SPI2 clock + * @arg RCC_APB1Periph_USART2: USART2 clock + * @arg RCC_APB1Periph_USART3: USART3 clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_APB1Periph_USART4: USART4 clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_APB1Periph_USART5: USART5 clock, applicable only for STM32F091 devices + * @arg RCC_APB1Periph_I2C1: I2C1 clock + * @arg RCC_APB1Periph_I2C2: I2C2 clock + * @arg RCC_APB1Periph_USB: USB clock, applicable only for STM32F042 and STM32F072 devices + * @arg RCC_APB1Periph_CAN: CAN clock, applicable only for STM32F042 and STM32F072 devices + * @arg RCC_APB1Periph_CRS: CRS clock , applicable only for STM32F042 and STM32F072 devices + * @arg RCC_APB1Periph_PWR: PWR clock + * @arg RCC_APB1Periph_DAC: DAC clock, applicable only for STM32F051 and STM32F072 devices + * @arg RCC_APB1Periph_CEC: CEC clock, applicable only for STM32F051, STM32F042 and STM32F072 devices + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases AHB peripheral reset. + * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_GPIOA: GPIOA clock + * @arg RCC_AHBPeriph_GPIOB: GPIOB clock + * @arg RCC_AHBPeriph_GPIOC: GPIOC clock + * @arg RCC_AHBPeriph_GPIOD: GPIOD clock + * @arg RCC_AHBPeriph_GPIOE: GPIOE clock, applicable only for STM32F072 devices + * @arg RCC_AHBPeriph_GPIOF: GPIOF clock + * @arg RCC_AHBPeriph_TS: TS clock + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_RST_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBRSTR |= RCC_AHBPeriph; + } + else + { + RCC->AHBRSTR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock + * @arg RCC_APB2Periph_USART6: USART6 clock + * @arg RCC_APB2Periph_USART7: USART7 clock + * @arg RCC_APB2Periph_USART8: USART8 clock + * @arg RCC_APB2Periph_ADC1: ADC1 clock + * @arg RCC_APB2Periph_TIM1: TIM1 clock + * @arg RCC_APB2Periph_SPI1: SPI1 clock + * @arg RCC_APB2Periph_USART1: USART1 clock + * @arg RCC_APB2Periph_TIM15: TIM15 clock + * @arg RCC_APB2Periph_TIM16: TIM16 clock + * @arg RCC_APB2Periph_TIM17: TIM17 clock + * @arg RCC_APB2Periph_DBGMCU: DBGMCU clock + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2: TIM2 clock, applicable only for STM32F051 and STM32F072 devices + * @arg RCC_APB1Periph_TIM3: TIM3 clock + * @arg RCC_APB1Periph_TIM6: TIM6 clock + * @arg RCC_APB1Periph_TIM7: TIM7 clock, applicable only for STM32F072 devices + * @arg RCC_APB1Periph_TIM14: TIM14 clock + * @arg RCC_APB1Periph_WWDG: WWDG clock + * @arg RCC_APB1Periph_SPI2: SPI2 clock + * @arg RCC_APB1Periph_USART2: USART2 clock + * @arg RCC_APB1Periph_USART3: USART3 clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_APB1Periph_USART4: USART4 clock, applicable only for STM32F072 and STM32F091 devices + * @arg RCC_APB1Periph_USART5: USART5 clock, applicable only for STM32F091 devices + * @arg RCC_APB1Periph_I2C1: I2C1 clock + * @arg RCC_APB1Periph_I2C2: I2C2 clock + * @arg RCC_APB1Periph_USB: USB clock, applicable only for STM32F042 and STM32F072 devices + * @arg RCC_APB1Periph_CAN: CAN clock, applicable only for STM32F042 and STM32F072 devices + * @arg RCC_APB1Periph_CRS: CRS clock , applicable only for STM32F042 and STM32F072 devices + * @arg RCC_APB1Periph_PWR: PWR clock + * @arg RCC_APB1Periph_DAC: DAC clock, applicable only for STM32F051 and STM32F072 devices + * @arg RCC_APB1Periph_CEC: CEC clock, applicable only for STM32F051, STM32F042 and STM32F072 devices + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @} + */ + +/** @defgroup RCC_Group4 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified RCC interrupts. + * @note The CSS interrupt doesn't have an enable bit; once the CSS is enabled + * and if the HSE clock fails, the CSS interrupt occurs and an NMI is + * automatically generated. The NMI will be executed indefinitely, and + * since NMI has higher priority than any other IRQ (and main program) + * the application will be stacked in the NMI ISR unless the CSS interrupt + * pending bit is cleared. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt, applicable only for STM32F072 devices + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR[13:8] bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE1_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR[13:8] bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE1_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_OBLRST: Option Byte Loader (OBL) reset + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_V18PWRRSTF: V1.8 power domain reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * @arg RCC_FLAG_HSI14RDY: HSI14 oscillator clock ready + * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready, applicable only for STM32F072 devices + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + + if (tmp == 0) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 1) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else if (tmp == 2) /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + else /* The flag to check is in CR2 register */ + { + statusreg = RCC->CR2; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_MASK; + + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_V18PWRRSTF, + * RCC_FLAG_PORRST, RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, + * RCC_FLAG_LPWRRST. + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= RCC_CSR_RMVF; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt, applicable only for STM32F072 devices + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt, applicable only for STM32F072 devices + * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_rtc.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_rtc.c new file mode 100644 index 0000000..5cc5649 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_rtc.c @@ -0,0 +1,2510 @@ +/** + ****************************************************************************** + * @file stm32f0xx_rtc.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * + Initialization + * + Calendar (Time and Date) configuration + * + Alarms (Alarm A) configuration + * + Daylight Saving configuration + * + Output pin Configuration + * + Digital Calibration configuration + * + TimeStamp configuration + * + Tampers configuration + * + Backup Data Registers configuration + * + Output Type Config configuration + * + Shift control synchronisation + * + Interrupts and flags management + * + @verbatim + =============================================================================== + ##### Backup Domain Operating Condition ##### + =============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC + when VDD is turned off, VBAT pin can be connected to an optional + standby voltage supplied by a battery or by another source. + + [..] To allow the RTC to operate even when the main digital supply (VDD) + is turned off, the VBAT pin powers the following blocks: + (#) The RTC + (#) The LSE oscillator + (#) PC13 to PC15 I/Os I/Os (when available) + + [..] When the backup domain is supplied by VDD (analog switch connected + to VDD), the following functions are available: + (#) PC14 and PC15 can be used as either GPIO or LSE pins + (#) PC13 can be used as a GPIO or as the RTC_AF1 pin + + [..] When the backup domain is supplied by VBAT (analog switch connected + to VBAT because VDD is not present), the following functions are available: + (#) PC14 and PC15 can be used as LSE pins only + (#) PC13 can be used as the RTC_AF1 pin + + ##### Backup Domain Reset ##### + =============================================================================== + [..] The backup domain reset sets all RTC registers and the RCC_BDCR + register to their reset values. + A backup domain reset is generated when one of the following events + occurs: + (#) Software reset, triggered by setting the BDRST bit in the + RCC Backup domain control register (RCC_BDCR). You can use the + RCC_BackupResetCmd(). + (#) VDD or VBAT power on, if both supplies have previously been + powered off. + + ##### Backup Domain Access ##### + =============================================================================== + [..] After reset, the backup domain (RTC registers and RTC backup data + registers) is protected against possible unwanted write accesses. + [..] To enable access to the Backup Domain and RTC registers, proceed as follows: + (#) Enable the Power Controller (PWR) APB1 interface clock using the + RCC_APB1PeriphClockCmd() function. + (#) Enable access to Backup domain using the PWR_BackupAccessCmd() function. + (#) Select the RTC clock source using the RCC_RTCCLKConfig() function. + (#) Enable RTC Clock using the RCC_RTCCLKCmd() function. + + + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable the backup domain access (see description in the section above) + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and + RTC hour format using the RTC_Init() function. + + ***Time and Date configuration *** + ================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the RTC_SetTime() + and RTC_SetDate() functions. + (+) To read the RTC Calendar, use the RTC_GetTime() and RTC_GetDate() + functions. + (+) To read the RTC subsecond, use the RTC_GetSubSecond() function. + (+) Use the RTC_DayLightSavingConfig() function to add or sub one + hour to the RTC Calendar. + + ***Alarm configuration *** + ========================== + [..] + (+) To configure the RTC Alarm use the RTC_SetAlarm() function. + (+) Enable the selected RTC Alarm using the RTC_AlarmCmd() function + (+) To read the RTC Alarm, use the RTC_GetAlarm() function. + (+) To read the RTC alarm SubSecond, use the RTC_GetAlarmSubSecond() function. + + ***RTC Wakeup configuration*** + ========================== + [..] + (+) Configure the RTC Wakeup Clock source use the RTC_WakeUpClockConfig() + function. + (+) Configure the RTC WakeUp Counter using the RTC_SetWakeUpCounter() + function + (+) Enable the RTC WakeUp using the RTC_WakeUpCmd() function + (+) To read the RTC WakeUp Counter register, use the RTC_GetWakeUpCounter() + function. + + ***Outputs configuration *** + ============================ + [..] The RTC has 2 different outputs: + (+) AFO_ALARM: this output is used to manage the RTC Alarm A. + To output the selected RTC signal on RTC_AF1 pin, use the + RTC_OutputConfig() function. + (+) AFO_CALIB: this output is 512Hz signal or 1Hz . + To output the RTC Clock on RTC_AF1 pin, use the RTC_CalibOutputCmd() + function. + + ***Original Digital Calibration configuration *** + ================================= + [..] Configure the RTC Original Digital Calibration Value and the corresponding + calibration cycle period (32s,16s and 8s) using the RTC_SmoothCalibConfig() + function. + + ***TimeStamp configuration *** + ============================== + [..] + (+) Configure the RTC_AF1 trigger and enables the RTC TimeStamp + using the RTC_TimeStampCmd() function. + (+) To read the RTC TimeStamp Time and Date register, use the + RTC_GetTimeStamp() function. + (+) To read the RTC TimeStamp SubSecond register, use the + RTC_GetTimeStampSubSecond() function. + + ***Tamper configuration *** + =========================== + [..] + (+) Configure the Tamper filter count using RTC_TamperFilterConfig() + function. + (+) Configure the RTC Tamper trigger Edge or Level according to the Tamper + filter (if equal to 0 Edge else Level) value using the RTC_TamperConfig() function + (+) Configure the Tamper sampling frequency using RTC_TamperSamplingFreqConfig() + function. + (+) Configure the Tamper precharge or discharge duration using + RTC_TamperPinsPrechargeDuration() function. + (+) Enable the Tamper Pull-UP using RTC_TamperPullUpDisableCmd() function. + (+) Enable the RTC Tamper using the RTC_TamperCmd() function. + (+) Enable the Time stamp on Tamper detection event using + RTC_TSOnTamperDetecCmd() function. + + ***Backup Data Registers configuration *** + ========================================== + [..] + (+) To write to the RTC Backup Data registers, use the RTC_WriteBackupRegister() + function. + (+) To read the RTC Backup Data registers, use the RTC_ReadBackupRegister() + function. + + ##### RTC and low power modes ##### + =============================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarm (Alarm A), RTC tamper + event detection and RTC time stamp event detection. + These RTC alternate functions can wake up the system from the Stop + and Standby lowpower modes. + The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and Standby modes is possible only when the RTC + clock source is LSE or LSI. + + ##### Selection of RTC_AF1 alternate functions ##### + =============================================================================== + [..] The RTC_AF1 pin (PC13) can be used for the following purposes: + (+) AFO_ALARM output + (+) AFO_CALIB output + (+) AFI_TAMPER + (+) AFI_TIMESTAMP + + +------------------------------------------------------------------------------------------+ + | Pin |AFO_ALARM |AFO_CALIB |AFI_TAMPER |AFI_TIMESTAMP | WKUP2 |ALARMOUTTYPE | + | configuration | ENABLED | ENABLED | ENABLED | ENABLED |ENABLED | AFO_ALARM | + | and function | | | | | |Configuration | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | Alarm out | | | | | Don't | | + | output OD | 1 | 0 |Don't care | Don't care | care | 0 | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | Alarm out | | | | | Don't | | + | output PP | 1 | 0 |Don't care | Don't care | care | 1 | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | Calibration out | | | | | Don't | | + | output PP | 0 | 1 |Don't care | Don't care | care | Don't care | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | TAMPER input | | | | | Don't | | + | floating | 0 | 0 | 1 | 0 | care | Don't care | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | TIMESTAMP and | | | | | Don't | | + | TAMPER input | 0 | 0 | 1 | 1 | care | Don't care | + | floating | | | | | | | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | TIMESTAMP input | | | | | Don't | | + | floating | 0 | 0 | 0 | 1 | care | Don't care | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | Wakeup Pin 2 | 0 | 0 | 0 | 0 | 1 | Don't care | + |-----------------|----------|----------|-----------|--------------|--------|--------------| + | Standard GPIO | 0 | 0 | 0 | 0 | 0 | Don't care | + +------------------------------------------------------------------------------------------+ + + @endverbatim + + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_rtc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup RTC + * @brief RTC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F) +#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F) +#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF) +#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F) +#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_ALRAF | \ + RTC_FLAG_RSF | RTC_FLAG_INITS |RTC_FLAG_INITF | \ + RTC_FLAG_TAMP1F | RTC_FLAG_TAMP2F | RTC_FLAG_RECALPF | \ + RTC_FLAG_SHPF)) + +#define INITMODE_TIMEOUT ((uint32_t) 0x00004000) +#define SYNCHRO_TIMEOUT ((uint32_t) 0x00008000) +#define RECALPF_TIMEOUT ((uint32_t) 0x00001000) +#define SHPF_TIMEOUT ((uint32_t) 0x00001000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static uint8_t RTC_ByteToBcd2(uint8_t Value); +static uint8_t RTC_Bcd2ToByte(uint8_t Value); + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RTC_Private_Functions + * @{ + */ + +/** @defgroup RTC_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + + [..] This section provide functions allowing to initialize and configure the RTC + Prescaler (Synchronous and Asynchronous), RTC Hour format, disable RTC registers + Write protection, enter and exit the RTC initialization mode, RTC registers + synchronization check and reference clock detection enable. + + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and A 13-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To Configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers.The RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the RTC registers to their default reset values. + * @note This function doesn't reset the RTC Clock source and RTC Backup Data + * registers. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are deinitialized + * - ERROR: RTC registers are not deinitialized + */ +ErrorStatus RTC_DeInit(void) +{ + ErrorStatus status = ERROR; + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Reset TR, DR and CR registers */ + RTC->TR = (uint32_t)0x00000000; + RTC->WUTR = (uint32_t)0x0000FFFF; + RTC->DR = (uint32_t)0x00002101; + RTC->CR &= (uint32_t)0x00000000; + RTC->PRER = (uint32_t)0x007F00FF; + RTC->ALRMAR = (uint32_t)0x00000000; + RTC->SHIFTR = (uint32_t)0x00000000; + RTC->CALR = (uint32_t)0x00000000; + RTC->ALRMASSR = (uint32_t)0x00000000; + + /* Reset ISR register and exit initialization mode */ + RTC->ISR = (uint32_t)0x00000000; + + /* Reset Tamper and alternate functions configuration register */ + RTC->TAFCR = 0x00000000; + + /* Wait till the RTC RSF flag is set */ + if (RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTC_InitStruct: pointer to a RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_HOUR_FORMAT(RTC_InitStruct->RTC_HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(RTC_InitStruct->RTC_AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(RTC_InitStruct->RTC_SynchPrediv)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Clear RTC CR FMT Bit */ + RTC->CR &= ((uint32_t)~(RTC_CR_FMT)); + /* Set RTC_CR register */ + RTC->CR |= ((uint32_t)(RTC_InitStruct->RTC_HourFormat)); + + /* Configure the RTC PRER */ + RTC->PRER = (uint32_t)(RTC_InitStruct->RTC_SynchPrediv); + RTC->PRER |= (uint32_t)(RTC_InitStruct->RTC_AsynchPrediv << 16); + + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + status = SUCCESS; + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Fills each RTC_InitStruct member with its default value. + * @param RTC_InitStruct: pointer to a RTC_InitTypeDef structure which will be + * initialized. + * @retval None + */ +void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct) +{ + /* Initialize the RTC_HourFormat member */ + RTC_InitStruct->RTC_HourFormat = RTC_HourFormat_24; + + /* Initialize the RTC_AsynchPrediv member */ + RTC_InitStruct->RTC_AsynchPrediv = (uint32_t)0x7F; + + /* Initialize the RTC_SynchPrediv member */ + RTC_InitStruct->RTC_SynchPrediv = (uint32_t)0xFF; +} + +/** + * @brief Enables or disables the RTC registers write protection. + * @note All the RTC registers are write protected except for RTC_ISR[13:8], + * RTC_TAFCR and RTC_BKPxR. + * @note Writing a wrong key reactivates the write protection. + * @note The protection mechanism is not affected by system reset. + * @param NewState: new state of the write protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_WriteProtectionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + } + else + { + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + } +} + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * RTC_WriteProtectionCmd(DISABLE) before calling this function. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus RTC_EnterInitMode(void) +{ + __IO uint32_t initcounter = 0x00; + ErrorStatus status = ERROR; + uint32_t initstatus = 0x00; + + /* Check if the Initialization mode is set */ + if ((RTC->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + /* Set the Initialization mode */ + RTC->ISR = (uint32_t)RTC_INIT_MASK; + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + do + { + initstatus = RTC->ISR & RTC_ISR_INITF; + initcounter++; + } while((initcounter != INITMODE_TIMEOUT) && (initstatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_INITF) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + } + else + { + status = SUCCESS; + } + + return (status); +} + +/** + * @brief Exits the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @note The RTC Initialization mode is write protected, use the + * RTC_WriteProtectionCmd(DISABLE) before calling this function. + * @param None + * @retval None + */ +void RTC_ExitInitMode(void) +{ + /* Exit Initialization mode */ + RTC->ISR &= (uint32_t)~RTC_ISR_INIT; +} + +/** + * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * RTC_WriteProtectionCmd(DISABLE) before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus RTC_WaitForSynchro(void) +{ + __IO uint32_t synchrocounter = 0; + ErrorStatus status = ERROR; + uint32_t synchrostatus = 0x00; + + if ((RTC->CR & RTC_CR_BYPSHAD) != RESET) + { + /* Bypass shadow mode */ + status = SUCCESS; + } + else + { + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear RSF flag */ + RTC->ISR &= (uint32_t)RTC_RSF_MASK; + + /* Wait the registers to be synchronised */ + do + { + synchrostatus = RTC->ISR & RTC_ISR_RSF; + synchrocounter++; + } while((synchrocounter != SYNCHRO_TIMEOUT) && (synchrostatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_RSF) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + } + + return (status); +} + +/** + * @brief Enables or disables the RTC reference clock detection. + * @param NewState: new state of the RTC reference clock. + * This parameter can be: ENABLE or DISABLE. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC reference clock detection is enabled + * - ERROR: RTC reference clock detection is disabled + */ +ErrorStatus RTC_RefClockCmd(FunctionalState NewState) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + if (NewState != DISABLE) + { + /* Enable the RTC reference clock detection */ + RTC->CR |= RTC_CR_REFCKON; + } + else + { + /* Disable the RTC reference clock detection */ + RTC->CR &= ~RTC_CR_REFCKON; + } + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + status = SUCCESS; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Enables or Disables the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param NewState: new state of the Bypass Shadow feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None +*/ +void RTC_BypassShadowCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Set the BYPSHAD bit */ + RTC->CR |= (uint8_t)RTC_CR_BYPSHAD; + } + else + { + /* Reset the BYPSHAD bit */ + RTC->CR &= (uint8_t)~RTC_CR_BYPSHAD; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @} + */ + +/** @defgroup RTC_Group2 Time and Date configuration functions + * @brief Time and Date configuration functions + * +@verbatim + =============================================================================== + ##### Time and Date configuration functions ##### + =============================================================================== + [..] This section provide functions allowing to program and read the RTC + Calendar (Time and Date). + +@endverbatim + * @{ + */ + +/** + * @brief Set the RTC current time. + * @param RTC_Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct) +{ + uint32_t tmpreg = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == RTC_Format_BIN) + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(RTC_TimeStruct->RTC_Hours)); + assert_param(IS_RTC_H12(RTC_TimeStruct->RTC_H12)); + } + else + { + RTC_TimeStruct->RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_TimeStruct->RTC_Hours)); + } + assert_param(IS_RTC_MINUTES(RTC_TimeStruct->RTC_Minutes)); + assert_param(IS_RTC_SECONDS(RTC_TimeStruct->RTC_Seconds)); + } + else + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_H12(RTC_TimeStruct->RTC_H12)); + } + else + { + RTC_TimeStruct->RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Seconds))); + } + + /* Check the input parameters format */ + if (RTC_Format != RTC_Format_BIN) + { + tmpreg = (((uint32_t)(RTC_TimeStruct->RTC_Hours) << 16) | \ + ((uint32_t)(RTC_TimeStruct->RTC_Minutes) << 8) | \ + ((uint32_t)RTC_TimeStruct->RTC_Seconds) | \ + ((uint32_t)(RTC_TimeStruct->RTC_H12) << 16)); + } + else + { + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Seconds)) | \ + (((uint32_t)RTC_TimeStruct->RTC_H12) << 16)); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Set the RTC_TR register */ + RTC->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if ((RTC->CR & RTC_CR_BYPSHAD) == RESET) + { + if (RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else + { + status = SUCCESS; + } + + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Fills each RTC_TimeStruct member with its default value + * (Time = 00h:00min:00sec). + * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure which will be + * initialized. + * @retval None + */ +void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->RTC_H12 = RTC_H12_AM; + RTC_TimeStruct->RTC_Hours = 0; + RTC_TimeStruct->RTC_Minutes = 0; + RTC_TimeStruct->RTC_Seconds = 0; +} + +/** + * @brief Get the RTC current Time. + * @param RTC_Format: specifies the format of the returned parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure that will + * contain the returned current time configuration. + * @retval None + */ +void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + /* Get the RTC_TR register */ + tmpreg = (uint32_t)(RTC->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + RTC_TimeStruct->RTC_Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16); + RTC_TimeStruct->RTC_Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8); + RTC_TimeStruct->RTC_Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU)); + RTC_TimeStruct->RTC_H12 = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); + + /* Check the input parameters format */ + if (RTC_Format == RTC_Format_BIN) + { + /* Convert the structure parameters to Binary format */ + RTC_TimeStruct->RTC_Hours = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours); + RTC_TimeStruct->RTC_Minutes = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Minutes); + RTC_TimeStruct->RTC_Seconds = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Seconds); + } +} + +/** + * @brief Gets the RTC current Calendar Subseconds value. + * @note This function freeze the Time and Date registers after reading the + * SSR register. + * @param None + * @retval RTC current Calendar Subseconds value. + */ +uint32_t RTC_GetSubSecond(void) +{ + uint32_t tmpreg = 0; + + /* Get subseconds values from the correspondent registers*/ + tmpreg = (uint32_t)(RTC->SSR); + + /* Read DR register to unfroze calendar registers */ + (void) (RTC->DR); + + return (tmpreg); +} + +/** + * @brief Set the RTC current date. + * @param RTC_Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that contains + * the date configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Date register is configured + * - ERROR: RTC Date register is not configured + */ +ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct) +{ + uint32_t tmpreg = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + if ((RTC_Format == RTC_Format_BIN) && ((RTC_DateStruct->RTC_Month & 0x10) == 0x10)) + { + RTC_DateStruct->RTC_Month = (RTC_DateStruct->RTC_Month & (uint32_t)~(0x10)) + 0x0A; + } + if (RTC_Format == RTC_Format_BIN) + { + assert_param(IS_RTC_YEAR(RTC_DateStruct->RTC_Year)); + assert_param(IS_RTC_MONTH(RTC_DateStruct->RTC_Month)); + assert_param(IS_RTC_DATE(RTC_DateStruct->RTC_Date)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(RTC_DateStruct->RTC_Year))); + tmpreg = RTC_Bcd2ToByte(RTC_DateStruct->RTC_Month); + assert_param(IS_RTC_MONTH(tmpreg)); + tmpreg = RTC_Bcd2ToByte(RTC_DateStruct->RTC_Date); + assert_param(IS_RTC_DATE(tmpreg)); + } + assert_param(IS_RTC_WEEKDAY(RTC_DateStruct->RTC_WeekDay)); + + /* Check the input parameters format */ + if (RTC_Format != RTC_Format_BIN) + { + tmpreg = ((((uint32_t)RTC_DateStruct->RTC_Year) << 16) | \ + (((uint32_t)RTC_DateStruct->RTC_Month) << 8) | \ + ((uint32_t)RTC_DateStruct->RTC_Date) | \ + (((uint32_t)RTC_DateStruct->RTC_WeekDay) << 13)); + } + else + { + tmpreg = (((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Year) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Month) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Date)) | \ + ((uint32_t)RTC_DateStruct->RTC_WeekDay << 13)); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Set the RTC_DR register */ + RTC->DR = (uint32_t)(tmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if ((RTC->CR & RTC_CR_BYPSHAD) == RESET) + { + if (RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Fills each RTC_DateStruct member with its default value + * (Monday, January 01 xx00). + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure which will be + * initialized. + * @retval None + */ +void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct) +{ + /* Monday, January 01 xx00 */ + RTC_DateStruct->RTC_WeekDay = RTC_Weekday_Monday; + RTC_DateStruct->RTC_Date = 1; + RTC_DateStruct->RTC_Month = RTC_Month_January; + RTC_DateStruct->RTC_Year = 0; +} + +/** + * @brief Get the RTC current date. + * @param RTC_Format: specifies the format of the returned parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that will + * contain the returned current date configuration. + * @retval None + */ +void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + /* Get the RTC_TR register */ + tmpreg = (uint32_t)(RTC->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + RTC_DateStruct->RTC_Year = (uint8_t)((tmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16); + RTC_DateStruct->RTC_Month = (uint8_t)((tmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8); + RTC_DateStruct->RTC_Date = (uint8_t)(tmpreg & (RTC_DR_DT | RTC_DR_DU)); + RTC_DateStruct->RTC_WeekDay = (uint8_t)((tmpreg & (RTC_DR_WDU)) >> 13); + + /* Check the input parameters format */ + if (RTC_Format == RTC_Format_BIN) + { + /* Convert the structure parameters to Binary format */ + RTC_DateStruct->RTC_Year = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Year); + RTC_DateStruct->RTC_Month = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Month); + RTC_DateStruct->RTC_Date = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Date); + RTC_DateStruct->RTC_WeekDay = (uint8_t)(RTC_DateStruct->RTC_WeekDay); + } +} + +/** + * @} + */ + +/** @defgroup RTC_Group3 Alarms configuration functions + * @brief Alarms (Alarm A) configuration functions + * +@verbatim + =============================================================================== + ##### Alarms (Alarm A and Alarm B) configuration functions ##### + =============================================================================== + [..] This section provide functions allowing to program and read the RTC + Alarms. + +@endverbatim + * @{ + */ + +/** + * @brief Set the specified RTC Alarm. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the RTC_AlarmCmd(DISABLE)). + * @param RTC_Format: specifies the format of the returned parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_Alarm: specifies the alarm to be configured. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @param RTC_AlarmStruct: pointer to a RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval None + */ +void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + assert_param(IS_RTC_ALARM(RTC_Alarm)); + assert_param(IS_RTC_ALARM_MASK(RTC_AlarmStruct->RTC_AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel)); + + if (RTC_Format == RTC_Format_BIN) + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours)); + assert_param(IS_RTC_H12(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12)); + } + else + { + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours)); + } + assert_param(IS_RTC_MINUTES(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes)); + assert_param(IS_RTC_SECONDS(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds)); + + if(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel == RTC_AlarmDateWeekDaySel_Date) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_AlarmStruct->RTC_AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_AlarmStruct->RTC_AlarmDateWeekDay)); + } + } + else + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_H12(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12)); + } + else + { + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds))); + + if(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel == RTC_AlarmDateWeekDaySel_Date) + { + tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); + } + else + { + tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); + } + } + + /* Check the input parameters format */ + if (RTC_Format != RTC_Format_BIN) + { + tmpreg = (((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours) << 16) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes) << 8) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12) << 16) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmDateWeekDay) << 24) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmDateWeekDaySel) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmMask)); + } + else + { + tmpreg = (((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds)) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmDateWeekDay) << 24) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmDateWeekDaySel) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmMask)); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Alarm register */ + RTC->ALRMAR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Fills each RTC_AlarmStruct member with its default value + * (Time = 00h:00mn:00sec / Date = 1st day of the month/Mask = + * all fields are masked). + * @param RTC_AlarmStruct: pointer to a @ref RTC_AlarmTypeDef structure which + * will be initialized. + * @retval None + */ +void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = RTC_H12_AM; + RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = 0; + RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = 0; + RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = 0; + + /* Alarm Date Settings : Date = 1st day of the month */ + RTC_AlarmStruct->RTC_AlarmDateWeekDaySel = RTC_AlarmDateWeekDaySel_Date; + RTC_AlarmStruct->RTC_AlarmDateWeekDay = 1; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->RTC_AlarmMask = RTC_AlarmMask_None; +} + +/** + * @brief Get the RTC Alarm value and masks. + * @param RTC_Format: specifies the format of the output parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_Alarm: specifies the alarm to be read. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @param RTC_AlarmStruct: pointer to a RTC_AlarmTypeDef structure that will + * contains the output alarm configuration values. + * @retval None + */ +void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + assert_param(IS_RTC_ALARM(RTC_Alarm)); + + /* Get the RTC_ALRMAR register */ + tmpreg = (uint32_t)(RTC->ALRMAR); + + /* Fill the structure with the read parameters */ + RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | \ + RTC_ALRMAR_HU)) >> 16); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | \ + RTC_ALRMAR_MNU)) >> 8); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | \ + RTC_ALRMAR_SU)); + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16); + RTC_AlarmStruct->RTC_AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24); + RTC_AlarmStruct->RTC_AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + RTC_AlarmStruct->RTC_AlarmMask = (uint32_t)(tmpreg & RTC_AlarmMask_All); + + if (RTC_Format == RTC_Format_BIN) + { + RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ + RTC_AlarmTime.RTC_Hours); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ + RTC_AlarmTime.RTC_Minutes); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ + RTC_AlarmTime.RTC_Seconds); + RTC_AlarmStruct->RTC_AlarmDateWeekDay = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); + } +} + +/** + * @brief Enables or disables the specified RTC Alarm. + * @param RTC_Alarm: specifies the alarm to be configured. + * This parameter can be any combination of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @param NewState: new state of the specified alarm. + * This parameter can be: ENABLE or DISABLE. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Alarm is enabled/disabled + * - ERROR: RTC Alarm is not enabled/disabled + */ +ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState) +{ + __IO uint32_t alarmcounter = 0x00; + uint32_t alarmstatus = 0x00; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_CMD_ALARM(RTC_Alarm)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Alarm state */ + if (NewState != DISABLE) + { + RTC->CR |= (uint32_t)RTC_Alarm; + + status = SUCCESS; + } + else + { + /* Disable the Alarm in RTC_CR register */ + RTC->CR &= (uint32_t)~RTC_Alarm; + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + do + { + alarmstatus = RTC->ISR & (RTC_Alarm >> 8); + alarmcounter++; + } while((alarmcounter != INITMODE_TIMEOUT) && (alarmstatus == 0x00)); + + if ((RTC->ISR & (RTC_Alarm >> 8)) == RESET) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Configure the RTC AlarmA/B Subseconds value and mask. + * @note This function is performed only when the Alarm is disabled. + * @param RTC_Alarm: specifies the alarm to be configured. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @param RTC_AlarmSubSecondValue: specifies the Subseconds value. + * This parameter can be a value from 0 to 0x00007FFF. + * @param RTC_AlarmSubSecondMask: specifies the Subseconds Mask. + * This parameter can be any combination of the following values: + * @arg RTC_AlarmSubSecondMask_All: All Alarm SS fields are masked. + * There is no comparison on sub seconds for Alarm. + * @arg RTC_AlarmSubSecondMask_SS14_1: SS[14:1] are don't care in Alarm comparison. + * Only SS[0] is compared + * @arg RTC_AlarmSubSecondMask_SS14_2: SS[14:2] are don't care in Alarm comparison. + * Only SS[1:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_3: SS[14:3] are don't care in Alarm comparison. + * Only SS[2:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_4: SS[14:4] are don't care in Alarm comparison. + * Only SS[3:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_5: SS[14:5] are don't care in Alarm comparison. + * Only SS[4:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_6: SS[14:6] are don't care in Alarm comparison. + * Only SS[5:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_7: SS[14:7] are don't care in Alarm comparison. + * Only SS[6:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_8: SS[14:8] are don't care in Alarm comparison. + * Only SS[7:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_9: SS[14:9] are don't care in Alarm comparison. + * Only SS[8:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_10: SS[14:10] are don't care in Alarm comparison. + * Only SS[9:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_11: SS[14:11] are don't care in Alarm comparison. + * Only SS[10:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_12: SS[14:12] are don't care in Alarm comparison. + * Only SS[11:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_13: SS[14:13] are don't care in Alarm comparison. + * Only SS[12:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14: SS[14] is don't care in Alarm comparison. + * Only SS[13:0] are compared + * @arg RTC_AlarmSubSecondMask_None: SS[14:0] are compared and must match to activate alarm + * @retval None + */ +void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint8_t RTC_AlarmSubSecondMask) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(RTC_Alarm)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(RTC_AlarmSubSecondValue)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(RTC_AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Alarm A or Alarm B SubSecond registers */ + tmpreg = (uint32_t) (((uint32_t)(RTC_AlarmSubSecondValue)) | ((uint32_t)(RTC_AlarmSubSecondMask) << 24)); + + /* Configure the AlarmA SubSecond register */ + RTC->ALRMASSR = tmpreg; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + +} + +/** + * @brief Gets the RTC Alarm Subseconds value. + * @param RTC_Alarm: specifies the alarm to be read. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @param None + * @retval RTC Alarm Subseconds value. + */ +uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm) +{ + uint32_t tmpreg = 0; + + /* Get the RTC_ALRMAR register */ + tmpreg = (uint32_t)((RTC->ALRMASSR) & RTC_ALRMASSR_SS); + + return (tmpreg); +} + +/** + * @} + */ + +/** @defgroup RTC_Group4 WakeUp Timer configuration functions + * @brief WakeUp Timer configuration functions + * +@verbatim + =============================================================================== + ##### WakeUp Timer configuration functions ##### + =============================================================================== + + [..] This section provide functions allowing to program and read the RTC WakeUp. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC Wakeup clock source. + * This function is available for STM32F072 devices. + * @note The WakeUp Clock source can only be changed when the RTC WakeUp + * is disabled (Use the RTC_WakeUpCmd(DISABLE)). + * @param RTC_WakeUpClock: Wakeup Clock source. + * This parameter can be one of the following values: + * @arg RTC_WakeUpClock_RTCCLK_Div16 + * @arg RTC_WakeUpClock_RTCCLK_Div8 + * @arg RTC_WakeUpClock_RTCCLK_Div4 + * @arg RTC_WakeUpClock_RTCCLK_Div2 + * @arg RTC_WakeUpClock_CK_SPRE_16bits + * @arg RTC_WakeUpClock_CK_SPRE_17bits + * @retval None + */ +void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock) +{ + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(RTC_WakeUpClock)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear the Wakeup Timer clock source bits in CR register */ + RTC->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + RTC->CR |= (uint32_t)RTC_WakeUpClock; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Configures the RTC Wakeup counter. + * This function is available for STM32F072 devices. + * @note The RTC WakeUp counter can only be written when the RTC WakeUp + * is disabled (Use the RTC_WakeUpCmd(DISABLE)). + * @param RTC_WakeUpCounter: specifies the WakeUp counter. + * This parameter can be a value from 0x0000 to 0xFFFF. + * @retval None + */ +void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter) +{ + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_COUNTER(RTC_WakeUpCounter)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Wakeup Timer counter */ + RTC->WUTR = (uint32_t)RTC_WakeUpCounter; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Returns the RTC WakeUp timer counter value. + * This function is available for STM32F072 devices. + * @param None + * @retval The RTC WakeUp Counter value. + */ +uint32_t RTC_GetWakeUpCounter(void) +{ + /* Get the counter value */ + return ((uint32_t)(RTC->WUTR & RTC_WUTR_WUT)); +} + +/** + * @brief Enables or Disables the RTC WakeUp timer. + * This function is available for STM32F072 devices. + * @param NewState: new state of the WakeUp timer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +ErrorStatus RTC_WakeUpCmd(FunctionalState NewState) +{ + __IO uint32_t wutcounter = 0x00; + uint32_t wutwfstatus = 0x00; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Enable the Wakeup Timer */ + RTC->CR |= (uint32_t)RTC_CR_WUTE; + status = SUCCESS; + } + else + { + /* Disable the Wakeup Timer */ + RTC->CR &= (uint32_t)~RTC_CR_WUTE; + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + do + { + wutwfstatus = RTC->ISR & RTC_ISR_WUTWF; + wutcounter++; + } while((wutcounter != INITMODE_TIMEOUT) && (wutwfstatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_WUTWF) == RESET) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @} + */ + +/** @defgroup RTC_Group5 Daylight Saving configuration functions + * @brief Daylight Saving configuration functions + * +@verbatim + =============================================================================== + ##### WakeUp Timer configuration functions ##### + =============================================================================== + [..] This section provide functions allowing to program and read the RTC WakeUp. + + This section provide functions allowing to configure the RTC DayLight Saving. + +@endverbatim + * @{ + */ + +/** + * @brief Adds or substract one hour from the current time. + * @param RTC_DayLightSaveOperation: the value of hour adjustment. + * This parameter can be one of the following values: + * @arg RTC_DayLightSaving_SUB1H: Substract one hour (winter time) + * @arg RTC_DayLightSaving_ADD1H: Add one hour (summer time) + * @param RTC_StoreOperation: Specifies the value to be written in the BCK bit + * in CR register to store the operation. + * This parameter can be one of the following values: + * @arg RTC_StoreOperation_Reset: BCK Bit Reset + * @arg RTC_StoreOperation_Set: BCK Bit Set + * @retval None + */ +void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation) +{ + /* Check the parameters */ + assert_param(IS_RTC_DAYLIGHT_SAVING(RTC_DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(RTC_StoreOperation)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear the bits to be configured */ + RTC->CR &= (uint32_t)~(RTC_CR_BCK); + + /* Configure the RTC_CR register */ + RTC->CR |= (uint32_t)(RTC_DayLightSaving | RTC_StoreOperation); + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Returns the RTC Day Light Saving stored operation. + * @param None + * @retval RTC Day Light Saving stored operation. + * - RTC_StoreOperation_Reset + * - RTC_StoreOperation_Set + */ +uint32_t RTC_GetStoreOperation(void) +{ + return (RTC->CR & RTC_CR_BCK); +} + +/** + * @} + */ + +/** @defgroup RTC_Group6 Output pin Configuration function + * @brief Output pin Configuration function + * +@verbatim + =============================================================================== + ##### Output pin Configuration function ##### + =============================================================================== + [..] This section provide functions allowing to configure the RTC Output source. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC output source (AFO_ALARM). + * @param RTC_Output: Specifies which signal will be routed to the RTC output. + * This parameter can be one of the following values: + * @arg RTC_Output_Disable: No output selected + * @arg RTC_Output_AlarmA: signal of AlarmA mapped to output + * @arg RTC_Output_WakeUp: signal of WakeUp mapped to output, available only for STM32F072 devices + * @param RTC_OutputPolarity: Specifies the polarity of the output signal. + * This parameter can be one of the following: + * @arg RTC_OutputPolarity_High: The output pin is high when the + * ALRAF is high (depending on OSEL) + * @arg RTC_OutputPolarity_Low: The output pin is low when the + * ALRAF is high (depending on OSEL) + * @retval None + */ +void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity) +{ + /* Check the parameters */ + assert_param(IS_RTC_OUTPUT(RTC_Output)); + assert_param(IS_RTC_OUTPUT_POL(RTC_OutputPolarity)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear the bits to be configured */ + RTC->CR &= (uint32_t)~(RTC_CR_OSEL | RTC_CR_POL); + + /* Configure the output selection and polarity */ + RTC->CR |= (uint32_t)(RTC_Output | RTC_OutputPolarity); + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @} + */ + +/** @defgroup RTC_Group7 Digital Calibration configuration functions + * @brief Digital Calibration configuration functions + * +@verbatim + =============================================================================== + ##### Digital Calibration configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the RTC clock to be output through the relative pin. + * @param NewState: new state of the digital calibration Output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_CalibOutputCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Enable the RTC clock output */ + RTC->CR |= (uint32_t)RTC_CR_COE; + } + else + { + /* Disable the RTC clock output */ + RTC->CR &= (uint32_t)~RTC_CR_COE; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param RTC_CalibOutput: Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CalibOutput_512Hz: A signal has a regular waveform at 512Hz. + * @arg RTC_CalibOutput_1Hz: A signal has a regular waveform at 1Hz. + * @retval None +*/ +void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(RTC_CalibOutput)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /*clear flags before config*/ + RTC->CR &= (uint32_t)~(RTC_CR_CALSEL); + + /* Configure the RTC_CR register */ + RTC->CR |= (uint32_t)RTC_CalibOutput; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Configures the Smooth Calibration Settings. + * @param RTC_SmoothCalibPeriod: Select the Smooth Calibration Period. + * This parameter can be can be one of the following values: + * @arg RTC_SmoothCalibPeriod_32sec: The smooth calibration periode is 32s. + * @arg RTC_SmoothCalibPeriod_16sec: The smooth calibration periode is 16s. + * @arg RTC_SmoothCalibPeriod_8sec: The smooth calibartion periode is 8s. + * @param RTC_SmoothCalibPlusPulses: Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SmoothCalibPlusPulses_Set: Add one RTCCLK puls every 2**11 pulses. + * @arg RTC_SmoothCalibPlusPulses_Reset: No RTCCLK pulses are added. + * @param RTC_SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Calib registers are configured + * - ERROR: RTC Calib registers are not configured +*/ +ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, + uint32_t RTC_SmoothCalibPlusPulses, + uint32_t RTC_SmouthCalibMinusPulsesValue) +{ + ErrorStatus status = ERROR; + uint32_t recalpfcount = 0; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(RTC_SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(RTC_SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(RTC_SmouthCalibMinusPulsesValue)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* check if a calibration is pending*/ + if ((RTC->ISR & RTC_ISR_RECALPF) != RESET) + { + /* wait until the Calibration is completed*/ + while (((RTC->ISR & RTC_ISR_RECALPF) != RESET) && (recalpfcount != RECALPF_TIMEOUT)) + { + recalpfcount++; + } + } + + /* check if the calibration pending is completed or if there is no calibration operation at all*/ + if ((RTC->ISR & RTC_ISR_RECALPF) == RESET) + { + /* Configure the Smooth calibration settings */ + RTC->CALR = (uint32_t)((uint32_t)RTC_SmoothCalibPeriod | (uint32_t)RTC_SmoothCalibPlusPulses | (uint32_t)RTC_SmouthCalibMinusPulsesValue); + + status = SUCCESS; + } + else + { + status = ERROR; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return (ErrorStatus)(status); +} + +/** + * @} + */ + + +/** @defgroup RTC_Group8 TimeStamp configuration functions + * @brief TimeStamp configuration functions + * +@verbatim + =============================================================================== + ##### TimeStamp configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or Disables the RTC TimeStamp functionality with the + * specified time stamp pin stimulating edge. + * @param RTC_TimeStampEdge: Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following: + * @arg RTC_TimeStampEdge_Rising: the Time stamp event occurs on the rising + * edge of the related pin. + * @arg RTC_TimeStampEdge_Falling: the Time stamp event occurs on the + * falling edge of the related pin. + * @param NewState: new state of the TimeStamp. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_TIMESTAMP_EDGE(RTC_TimeStampEdge)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(RTC->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Get the new configuration */ + if (NewState != DISABLE) + { + tmpreg |= (uint32_t)(RTC_TimeStampEdge | RTC_CR_TSE); + } + else + { + tmpreg |= (uint32_t)(RTC_TimeStampEdge); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Time Stamp TSEDGE and Enable bits */ + RTC->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Get the RTC TimeStamp value and masks. + * @param RTC_Format: specifies the format of the output parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_StampTimeStruct: pointer to a RTC_TimeTypeDef structure that will + * contains the TimeStamp time values. + * @param RTC_StampDateStruct: pointer to a RTC_DateTypeDef structure that will + * contains the TimeStamp date values. + * @retval None + */ +void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, + RTC_DateTypeDef* RTC_StampDateStruct) +{ + uint32_t tmptime = 0, tmpdate = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = (uint32_t)(RTC->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(RTC->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + RTC_StampTimeStruct->RTC_Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16); + RTC_StampTimeStruct->RTC_Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8); + RTC_StampTimeStruct->RTC_Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU)); + RTC_StampTimeStruct->RTC_H12 = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16); + + /* Fill the Date structure fields with the read parameters */ + RTC_StampDateStruct->RTC_Year = 0; + RTC_StampDateStruct->RTC_Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8); + RTC_StampDateStruct->RTC_Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); + RTC_StampDateStruct->RTC_WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13); + + /* Check the input parameters format */ + if (RTC_Format == RTC_Format_BIN) + { + /* Convert the Time structure parameters to Binary format */ + RTC_StampTimeStruct->RTC_Hours = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Hours); + RTC_StampTimeStruct->RTC_Minutes = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Minutes); + RTC_StampTimeStruct->RTC_Seconds = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Seconds); + + /* Convert the Date structure parameters to Binary format */ + RTC_StampDateStruct->RTC_Month = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_Month); + RTC_StampDateStruct->RTC_Date = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_Date); + RTC_StampDateStruct->RTC_WeekDay = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_WeekDay); + } +} + +/** + * @brief Get the RTC timestamp Subseconds value. + * @param None + * @retval RTC current timestamp Subseconds value. + */ +uint32_t RTC_GetTimeStampSubSecond(void) +{ + /* Get timestamp subseconds values from the correspondent registers */ + return (uint32_t)(RTC->TSSSR); +} + +/** + * @} + */ + +/** @defgroup RTC_Group9 Tampers configuration functions + * @brief Tampers configuration functions + * +@verbatim + =============================================================================== + ##### Tampers configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the select Tamper pin edge. + * @param RTC_Tamper: Selected tamper pin. + * This parameter can be any combination of the following values: + * @arg RTC_Tamper_1: Select Tamper 1. + * @arg RTC_Tamper_2: Select Tamper 2. + * @param RTC_TamperTrigger: Specifies the trigger on the tamper pin that + * stimulates tamper event. + * This parameter can be one of the following values: + * @arg RTC_TamperTrigger_RisingEdge: Rising Edge of the tamper pin causes tamper event. + * @arg RTC_TamperTrigger_FallingEdge: Falling Edge of the tamper pin causes tamper event. + * @arg RTC_TamperTrigger_LowLevel: Low Level of the tamper pin causes tamper event. + * @arg RTC_TamperTrigger_HighLevel: High Level of the tamper pin causes tamper event. + * @retval None + */ +void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(RTC_Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(RTC_TamperTrigger)); + + if (RTC_TamperTrigger == RTC_TamperTrigger_RisingEdge) + { + /* Configure the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)((uint32_t)~(RTC_Tamper << 1)); + } + else + { + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)(RTC_Tamper << 1); + } +} + +/** + * @brief Enables or Disables the Tamper detection. + * @param RTC_Tamper: Selected tamper pin. + * This parameter can be any combination of the following values: + * @arg RTC_Tamper_1: Select Tamper 1. + * @arg RTC_Tamper_2: Select Tamper 2. + * @param NewState: new state of the tamper pin. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(RTC_Tamper)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected Tamper pin */ + RTC->TAFCR |= (uint32_t)RTC_Tamper; + } + else + { + /* Disable the selected Tamper pin */ + RTC->TAFCR &= (uint32_t)~RTC_Tamper; + } +} + +/** + * @brief Configures the Tampers Filter. + * @param RTC_TamperFilter: Specifies the tampers filter. + * This parameter can be one of the following values: + * @arg RTC_TamperFilter_Disable: Tamper filter is disabled. + * @arg RTC_TamperFilter_2Sample: Tamper is activated after 2 consecutive + * samples at the active level + * @arg RTC_TamperFilter_4Sample: Tamper is activated after 4 consecutive + * samples at the active level + * @arg RTC_TamperFilter_8Sample: Tamper is activated after 8 consecutive + * samples at the active level + * @retval None + */ +void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_FILTER(RTC_TamperFilter)); + + /* Clear TAMPFLT[1:0] bits in the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPFLT); + + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)RTC_TamperFilter; +} + +/** + * @brief Configures the Tampers Sampling Frequency. + * @param RTC_TamperSamplingFreq: Specifies the tampers Sampling Frequency. + * This parameter can be one of the following values: + * @arg RTC_TamperSamplingFreq_RTCCLK_Div32768: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 32768 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div16384: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 16384 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div8192: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 8192 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div4096: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 4096 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div2048: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 2048 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div1024: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 1024 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div512: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 512 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div256: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 256 + * @retval None + */ +void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(RTC_TamperSamplingFreq)); + + /* Clear TAMPFREQ[2:0] bits in the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPFREQ); + + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)RTC_TamperSamplingFreq; +} + +/** + * @brief Configures the Tampers Pins input Precharge Duration. + * @param RTC_TamperPrechargeDuration: Specifies the Tampers Pins input + * Precharge Duration. + * This parameter can be one of the following values: + * @arg RTC_TamperPrechargeDuration_1RTCCLK: Tamper pins are pre-charged before sampling during 1 RTCCLK cycle + * @arg RTC_TamperPrechargeDuration_2RTCCLK: Tamper pins are pre-charged before sampling during 2 RTCCLK cycle + * @arg RTC_TamperPrechargeDuration_4RTCCLK: Tamper pins are pre-charged before sampling during 4 RTCCLK cycle + * @arg RTC_TamperPrechargeDuration_8RTCCLK: Tamper pins are pre-charged before sampling during 8 RTCCLK cycle + * @retval None + */ +void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(RTC_TamperPrechargeDuration)); + + /* Clear TAMPPRCH[1:0] bits in the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPPRCH); + + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)RTC_TamperPrechargeDuration; +} + +/** + * @brief Enables or Disables the TimeStamp on Tamper Detection Event. + * @note The timestamp is valid even the TSE bit in tamper control register + * is reset. + * @param NewState: new state of the timestamp on tamper event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Save timestamp on tamper detection event */ + RTC->TAFCR |= (uint32_t)RTC_TAFCR_TAMPTS; + } + else + { + /* Tamper detection does not cause a timestamp to be saved */ + RTC->TAFCR &= (uint32_t)~RTC_TAFCR_TAMPTS; + } +} + +/** + * @brief Enables or Disables the Precharge of Tamper pin. + * @param NewState: new state of tamper pull up. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TamperPullUpCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable precharge of the selected Tamper pin */ + RTC->TAFCR &= (uint32_t)~RTC_TAFCR_TAMPPUDIS; + } + else + { + /* Disable precharge of the selected Tamper pin */ + RTC->TAFCR |= (uint32_t)RTC_TAFCR_TAMPPUDIS; + } +} + +/** + * @} + */ + +/** @defgroup RTC_Group10 Backup Data Registers configuration functions + * @brief Backup Data Registers configuration functions + * +@verbatim + =============================================================================== + ##### Backup Data Registers configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @param RTC_BKP_DR: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to + * specify the register. + * @param Data: Data to be written in the specified RTC Backup data register. + * @retval None + */ +void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(RTC_BKP_DR)); + + tmp = RTC_BASE + 0x50; + tmp += (RTC_BKP_DR * 4); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param RTC_BKP_DR: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to + * specify the register. + * @retval None + */ +uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(RTC_BKP_DR)); + + tmp = RTC_BASE + 0x50; + tmp += (RTC_BKP_DR * 4); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @} + */ + +/** @defgroup RTC_Group11 Output Type Config configuration functions + * @brief Output Type Config configuration functions + * +@verbatim + =============================================================================== + ##### Output Type Config configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC Output Pin mode. + * @param RTC_OutputType: specifies the RTC Output (PC13) pin mode. + * This parameter can be one of the following values: + * @arg RTC_OutputType_OpenDrain: RTC Output (PC13) is configured in + * Open Drain mode. + * @arg RTC_OutputType_PushPull: RTC Output (PC13) is configured in + * Push Pull mode. + * @retval None + */ +void RTC_OutputTypeConfig(uint32_t RTC_OutputType) +{ + /* Check the parameters */ + assert_param(IS_RTC_OUTPUT_TYPE(RTC_OutputType)); + + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_ALARMOUTTYPE); + RTC->TAFCR |= (uint32_t)(RTC_OutputType); +} + +/** + * @} + */ + +/** @defgroup RTC_Group12 Shift control synchronisation functions + * @brief Shift control synchronisation functions + * +@verbatim + =============================================================================== + ##### Shift control synchronisation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register + * @param RTC_ShiftAdd1S: Select to add or not 1 second to the time Calendar. + * This parameter can be one of the following values : + * @arg RTC_ShiftAdd1S_Set: Add one second to the clock calendar. + * @arg RTC_ShiftAdd1S_Reset: No effect. + * @param RTC_ShiftSubFS: Select the number of Second Fractions to Substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Shift registers are configured + * - ERROR: RTC Shift registers are not configured +*/ +ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS) +{ + ErrorStatus status = ERROR; + uint32_t shpfcount = 0; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(RTC_ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(RTC_ShiftSubFS)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Check if a Shift is pending*/ + if ((RTC->ISR & RTC_ISR_SHPF) != RESET) + { + /* Wait until the shift is completed*/ + while (((RTC->ISR & RTC_ISR_SHPF) != RESET) && (shpfcount != SHPF_TIMEOUT)) + { + shpfcount++; + } + } + + /* Check if the Shift pending is completed or if there is no Shift operation at all*/ + if ((RTC->ISR & RTC_ISR_SHPF) == RESET) + { + /* check if the reference clock detection is disabled */ + if((RTC->CR & RTC_CR_REFCKON) == RESET) + { + /* Configure the Shift settings */ + RTC->SHIFTR = (uint32_t)(uint32_t)(RTC_ShiftSubFS) | (uint32_t)(RTC_ShiftAdd1S); + + if(RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else + { + status = ERROR; + } + } + else + { + status = ERROR; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return (ErrorStatus)(status); +} + +/** + * @} + */ + +/** @defgroup RTC_Group13 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] All RTC interrupts are connected to the EXTI controller. + + (+) To enable the RTC Alarm interrupt, the following sequence is required: + (++) Configure and enable the EXTI Line 17 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + (++) Configure and enable the RTC_Alarm IRQ channel in the NVIC using the NVIC_Init() + function. + (++) Configure the RTC to generate RTC alarms (Alarm A) using + the RTC_SetAlarm() and RTC_AlarmCmd() functions. + + (+) To enable the RTC Tamper interrupt, the following sequence is required: + (++) Configure and enable the EXTI Line 19 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + (++) Configure and enable the TAMP_STAMP IRQ channel in the NVIC using the NVIC_Init() + function. + (++) Configure the RTC to detect the RTC tamper event using the + RTC_TamperTriggerConfig() and RTC_TamperCmd() functions. + + (+) To enable the RTC TimeStamp interrupt, the following sequence is required: + (++) Configure and enable the EXTI Line 19 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + (++) Configure and enable the TAMP_STAMP IRQ channel in the NVIC using the NVIC_Init() + function. + (++) Configure the RTC to detect the RTC time-stamp event using the + RTC_TimeStampCmd() functions. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified RTC interrupts. + * @param RTC_IT: specifies the RTC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TS: Time Stamp interrupt mask + * @arg RTC_IT_WUT: WakeUp Timer interrupt mask, available only for STM32F072 devices + * @arg RTC_IT_ALRA: Alarm A interrupt mask + * @arg RTC_IT_TAMP: Tamper event interrupt mask + * @param NewState: new state of the specified RTC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_CONFIG_IT(RTC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Configure the Interrupts in the RTC_CR register */ + RTC->CR |= (uint32_t)(RTC_IT & ~RTC_TAFCR_TAMPIE); + /* Configure the Tamper Interrupt in the RTC_TAFCR */ + RTC->TAFCR |= (uint32_t)(RTC_IT & RTC_TAFCR_TAMPIE); + } + else + { + /* Configure the Interrupts in the RTC_CR register */ + RTC->CR &= (uint32_t)~(RTC_IT & (uint32_t)~RTC_TAFCR_TAMPIE); + /* Configure the Tamper Interrupt in the RTC_TAFCR */ + RTC->TAFCR &= (uint32_t)~(RTC_IT & RTC_TAFCR_TAMPIE); + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Checks whether the specified RTC flag is set or not. + * @param RTC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RTC_FLAG_RECALPF: RECALPF event flag + * @arg RTC_FLAG_TAMP2F: Tamper 2 event flag + * @arg RTC_FLAG_TAMP1F: Tamper 1 event flag + * @arg RTC_FLAG_TSOVF: Time Stamp OverFlow flag + * @arg RTC_FLAG_TSF: Time Stamp event flag + * @arg RTC_FLAG_WUTF: WakeUp Timer flag, available only for STM32F072 devices + * @arg RTC_FLAG_ALRAF: Alarm A flag + * @arg RTC_FLAG_INITF: Initialization mode flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @arg RTC_FLAG_INITS: Registers Configured flag + * @retval The new state of RTC_FLAG (SET or RESET). + */ +FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); + + /* Get all the flags */ + tmpreg = (uint32_t)(RTC->ISR & RTC_FLAGS_MASK); + + /* Return the status of the flag */ + if ((tmpreg & RTC_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's pending flags. + * @param RTC_FLAG: specifies the RTC flag to clear. + * This parameter can be any combination of the following values: + * @arg RTC_FLAG_TAMP2F: Tamper 2 event flag + * @arg RTC_FLAG_TAMP1F: Tamper 1 event flag + * @arg RTC_FLAG_TSOVF: Time Stamp Overflow flag + * @arg RTC_FLAG_TSF: Time Stamp event flag + * @arg RTC_FLAG_WUTF: WakeUp Timer flag, available only for STM32F072 devices + * @arg RTC_FLAG_ALRAF: Alarm A flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @retval None + */ +void RTC_ClearFlag(uint32_t RTC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); + + /* Clear the Flags in the RTC_ISR register */ + RTC->ISR = (uint32_t)((uint32_t)(~((RTC_FLAG | RTC_ISR_INIT)& 0x0001FFFF) | (uint32_t)(RTC->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Checks whether the specified RTC interrupt has occurred or not. + * @param RTC_IT: specifies the RTC interrupt source to check. + * This parameter can be one of the following values: + * @arg RTC_IT_TS: Time Stamp interrupt + * @arg RTC_IT_WUT: WakeUp Timer interrupt, available only for STM32F072 devices + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_TAMP1: Tamper1 event interrupt + * @arg RTC_IT_TAMP2: Tamper2 event interrupt + * @retval The new state of RTC_IT (SET or RESET). + */ +ITStatus RTC_GetITStatus(uint32_t RTC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_RTC_GET_IT(RTC_IT)); + + /* Get the TAMPER Interrupt enable bit and pending bit */ + tmpreg = (uint32_t)(RTC->TAFCR & (RTC_TAFCR_TAMPIE)); + + /* Get the Interrupt enable Status */ + enablestatus = (uint32_t)((RTC->CR & RTC_IT) | (tmpreg & ((RTC_IT >> (RTC_IT >> 18)) >> 15))); + + /* Get the Interrupt pending bit */ + tmpreg = (uint32_t)((RTC->ISR & (uint32_t)(RTC_IT >> 4))); + + /* Get the status of the Interrupt */ + if ((enablestatus != (uint32_t)RESET) && ((tmpreg & 0x0000FFFF) != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's interrupt pending bits. + * @param RTC_IT: specifies the RTC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TS: Time Stamp interrupt + * @arg RTC_IT_WUT: WakeUp Timer interrupt, available only for STM32F072 devices + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_TAMP1: Tamper1 event interrupt + * @arg RTC_IT_TAMP2: Tamper2 event interrupt + * @retval None + */ +void RTC_ClearITPendingBit(uint32_t RTC_IT) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_IT(RTC_IT)); + + /* Get the RTC_ISR Interrupt pending bits mask */ + tmpreg = (uint32_t)(RTC_IT >> 4); + + /* Clear the interrupt pending bits in the RTC_ISR register */ + RTC->ISR = (uint32_t)((uint32_t)(~((tmpreg | RTC_ISR_INIT)& 0x0000FFFF) | (uint32_t)(RTC->ISR & RTC_ISR_INIT))); +} + +/** + * @} + */ + +/** + * @brief Converts a 2 digit decimal to BCD format. + * @param Value: Byte to be converted. + * @retval Converted byte + */ +static uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint8_t bcdhigh = 0; + + while (Value >= 10) + { + bcdhigh++; + Value -= 10; + } + + return ((uint8_t)(bcdhigh << 4) | Value); +} + +/** + * @brief Convert from 2 digit BCD to Binary. + * @param Value: BCD value to be converted. + * @retval Converted word + */ +static uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint8_t tmp = 0; + tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10; + return (tmp + (Value & (uint8_t)0x0F)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_spi.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_spi.c new file mode 100644 index 0000000..d75fd30 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_spi.c @@ -0,0 +1,1326 @@ +/** + ****************************************************************************** + * @file stm32f0xx_spi.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Serial peripheral interface (SPI): + * + Initialization and Configuration + * + Data transfers functions + * + Hardware CRC Calculation + * + DMA transfers management + * + Interrupts and flags management + * + * @verbatim + + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (#) Enable peripheral clock using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE) + function for SPI1 or using RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE) + function for SPI2. + + (#) Enable SCK, MOSI, MISO and NSS GPIO clocks using + RCC_AHBPeriphClockCmd() function. + + (#) Peripherals alternate function: + (++) Connect the pin to the desired peripherals' Alternate + Function (AF) using GPIO_PinAFConfig() function. + (++) Configure the desired pin in alternate function by: + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF. + (++) Select the type, pull-up/pull-down and output speed via + GPIO_PuPd, GPIO_OType and GPIO_Speed members. + (++) Call GPIO_Init() function. + + (#) Program the Polarity, Phase, First Data, Baud Rate Prescaler, Slave + Management, Peripheral Mode and CRC Polynomial values using the SPI_Init() + function.In I2S mode, program the Mode, Standard, Data Format, MCLK + Output, Audio frequency and Polarity using I2S_Init() function. + + (#) Configure the FIFO threshold using SPI_RxFIFOThresholdConfig() to select + at which threshold the RXNE event is generated. + + (#) Enable the NVIC and the corresponding interrupt using the function + SPI_ITConfig() if you need to use interrupt mode. + + (#) When using the DMA mode + (++) Configure the DMA using DMA_Init() function. + (++) Active the needed channel Request using SPI_I2S_DMACmd() function. + + (#) Enable the SPI using the SPI_Cmd() function or enable the I2S using + I2S_Cmd(). + + (#) Enable the DMA using the DMA_Cmd() function when using DMA mode. + + (#) Optionally, you can enable/configure the following parameters without + re-initialization (i.e there is no need to call again SPI_Init() function): + (++) When bidirectional mode (SPI_Direction_1Line_Rx or SPI_Direction_1Line_Tx) + is programmed as Data direction parameter using the SPI_Init() + function it can be possible to switch between SPI_Direction_Tx + or SPI_Direction_Rx using the SPI_BiDirectionalLineConfig() function. + (++) When SPI_NSS_Soft is selected as Slave Select Management parameter + using the SPI_Init() function it can be possible to manage the + NSS internal signal using the SPI_NSSInternalSoftwareConfig() function. + (++) Reconfigure the data size using the SPI_DataSizeConfig() function. + (++) Enable or disable the SS output using the SPI_SSOutputCmd() function. + + (#) To use the CRC Hardware calculation feature refer to the Peripheral + CRC hardware Calculation subsection. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_spi.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* SPI registers Masks */ +#define CR1_CLEAR_MASK ((uint16_t)0x3040) +#define CR1_CLEAR_MASK2 ((uint16_t)0xFFFB) +#define CR2_LDMA_MASK ((uint16_t)0x9FFF) + +#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SPI_Private_Functions + * @{ + */ + +/** @defgroup SPI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides a set of functions allowing to initialize the SPI Direction, + SPI Mode, SPI Data Size, SPI Polarity, SPI Phase, SPI NSS Management, SPI Baud + Rate Prescaler, SPI First Bit and SPI CRC Polynomial. + + [..] The SPI_Init() function follows the SPI configuration procedures for Master mode + and Slave mode (details for these procedures are available in reference manual). + + [..] When the Software NSS management (SPI_InitStruct->SPI_NSS = SPI_NSS_Soft) is selected, + use the following function to manage the NSS bit: + void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); + + [..] In Master mode, when the Hardware NSS management (SPI_InitStruct->SPI_NSS = SPI_NSS_Hard) + is selected, use the follwoing function to enable the NSS output feature. + void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); + + [..] The NSS pulse mode can be managed by the SPI TI mode when enabling it using the following function: + void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); + And it can be managed by software in the SPI Motorola mode using this function: + void SPI_NSSPulseModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); + + [..] This section provides also functions to initialize the I2S Mode, Standard, + Data Format, MCLK Output, Audio frequency and Polarity. + + [..] The I2S_Init() function follows the I2S configuration procedures for Master mode + and Slave mode. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the SPIx peripheral registers to their default + * reset values. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * I2S mode is not supported for STM32F030 devices. + * @retval None + */ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + if (SPIx == SPI1) + { + /* Enable SPI1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + /* Release SPI1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else + { + if (SPIx == SPI2) + { + /* Enable SPI2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Release SPI2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } + } +} + +/** + * @brief Fills each SPI_InitStruct member with its default value. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure which will be initialized. + * @retval None + */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) +{ +/*--------------- Reset SPI init structure parameters values -----------------*/ + /* Initialize the SPI_Direction member */ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + /* Initialize the SPI_Mode member */ + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + /* Initialize the SPI_DataSize member */ + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + /* Initialize the SPI_CPOL member */ + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + /* Initialize the SPI_CPHA member */ + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + /* Initialize the SPI_NSS member */ + SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; + /* Initialize the SPI_BaudRatePrescaler member */ + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + /* Initialize the SPI_FirstBit member */ + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + /* Initialize the SPI_CRCPolynomial member */ + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * @retval None + */ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + /* check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Check the SPI parameters */ + assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); + assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); + assert_param(IS_SPI_DATA_SIZE(SPI_InitStruct->SPI_DataSize)); + assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); + assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); + assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); + assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); + + /*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, CPOL and CPHA bits */ + tmpreg &= CR1_CLEAR_MASK; + /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler + master/slave mode, CPOL and CPHA */ + /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ + /* Set SSM, SSI bit according to SPI_NSS values */ + /* Set LSBFirst bit according to SPI_FirstBit value */ + /* Set BR bits according to SPI_BaudRatePrescaler value */ + /* Set CPOL bit according to SPI_CPOL value */ + /* Set CPHA bit according to SPI_CPHA value */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_FirstBit | + SPI_InitStruct->SPI_CPOL | SPI_InitStruct->SPI_CPHA | + SPI_InitStruct->SPI_NSS | SPI_InitStruct->SPI_BaudRatePrescaler); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + /*-------------------------Data Size Configuration -----------------------*/ + /* Get the SPIx CR2 value */ + tmpreg = SPIx->CR2; + /* Clear DS[3:0] bits */ + tmpreg &=(uint16_t)~SPI_CR2_DS; + /* Configure SPIx: Data Size */ + tmpreg |= (uint16_t)(SPI_InitStruct->SPI_DataSize); + /* Write to SPIx CR2 */ + SPIx->CR2 = tmpreg; + + /*---------------------------- SPIx CRCPOLY Configuration --------------------*/ + /* Write to SPIx CRCPOLY */ + SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; + + /*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear MSTR bit */ + tmpreg &= CR1_CLEAR_MASK2; + /* Configure SPIx: master/slave mode */ + /* Set MSTR bit according to SPI_Mode */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Mode); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + SPIx->I2SCFGR &= (uint16_t)~((uint16_t)SPI_I2SCFGR_I2SMOD); +} + +/** + * @brief Fills each I2S_InitStruct member with its default value. + * @note This mode is not supported for STM32F030 devices. + * @param I2S_InitStruct: pointer to a I2S_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) +{ +/*--------------- Reset I2S init structure parameters values -----------------*/ + /* Initialize the I2S_Mode member */ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + + /* Initialize the I2S_Standard member */ + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + + /* Initialize the I2S_DataFormat member */ + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + + /* Initialize the I2S_MCLKOutput member */ + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + + /* Initialize the I2S_AudioFreq member */ + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + + /* Initialize the I2S_CPOL member */ + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * @note This mode is not supported for STM32F030 devices. + * @param SPIx: where x can be 1 to select the SPI peripheral (configured in I2S mode). + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * @note This function calculates the optimal prescaler needed to obtain the most + * accurate audio frequency (depending on the I2S clock source, the PLL values + * and the product configuration). But in case the prescaler value is greater + * than 511, the default value (0x02) will be configured instead. + * @retval None + */ +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0; + RCC_ClocksTypeDef RCC_Clocks; + uint32_t sourceclock = 0; + + /* Check the I2S parameters */ + assert_param(IS_SPI_1_PERIPH(SPIx)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; + SPIx->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = SPIx->I2SCFGR; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) */ + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + /* Remove the floating point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /* Write to SPIx I2SPR register the computed value */ + SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)(SPI_I2SCFGR_I2SMOD | (uint16_t)(I2S_InitStruct->I2S_Mode | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + SPIx->I2SCFGR = tmpreg; +} + +/** + * @brief Enables or disables the specified SPI peripheral. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral */ + SPIx->CR1 |= SPI_CR1_SPE; + } + else + { + /* Disable the selected SPI peripheral */ + SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_SPE); + } +} + +/** + * @brief Enables or disables the TI Mode. + * + * @note This function can be called only after the SPI_Init() function has + * been called. + * @note When TI mode is selected, the control bits SSM, SSI, CPOL and CPHA + * are not taken into consideration and are configured by hardware + * respectively to the TI mode requirements. + * + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param NewState: new state of the selected SPI TI communication mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TI mode for the selected SPI peripheral */ + SPIx->CR2 |= SPI_CR2_FRF; + } + else + { + /* Disable the TI mode for the selected SPI peripheral */ + SPIx->CR2 &= (uint16_t)~((uint16_t)SPI_CR2_FRF); + } +} + +/** + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * @note This mode is not supported for STM32F030 devices. + * @param SPIx: where x can be 1 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_1_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral in I2S mode */ + SPIx->I2SCFGR |= SPI_I2SCFGR_I2SE; + } + else + { + /* Disable the selected SPI peripheral in I2S mode */ + SPIx->I2SCFGR &= (uint16_t)~((uint16_t)SPI_I2SCFGR_I2SE); + } +} + +/** + * @brief Configures the data size for the selected SPI. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_DataSize: specifies the SPI data size. + * For the SPIx peripheral this parameter can be one of the following values: + * @arg SPI_DataSize_4b: Set data size to 4 bits + * @arg SPI_DataSize_5b: Set data size to 5 bits + * @arg SPI_DataSize_6b: Set data size to 6 bits + * @arg SPI_DataSize_7b: Set data size to 7 bits + * @arg SPI_DataSize_8b: Set data size to 8 bits + * @arg SPI_DataSize_9b: Set data size to 9 bits + * @arg SPI_DataSize_10b: Set data size to 10 bits + * @arg SPI_DataSize_11b: Set data size to 11 bits + * @arg SPI_DataSize_12b: Set data size to 12 bits + * @arg SPI_DataSize_13b: Set data size to 13 bits + * @arg SPI_DataSize_14b: Set data size to 14 bits + * @arg SPI_DataSize_15b: Set data size to 15 bits + * @arg SPI_DataSize_16b: Set data size to 16 bits + * @retval None + */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DATA_SIZE(SPI_DataSize)); + /* Read the CR2 register */ + tmpreg = SPIx->CR2; + /* Clear DS[3:0] bits */ + tmpreg &= (uint16_t)~SPI_CR2_DS; + /* Set new DS[3:0] bits value */ + tmpreg |= SPI_DataSize; + SPIx->CR2 = tmpreg; +} + +/** + * @brief Configures the FIFO reception threshold for the selected SPI. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_RxFIFOThreshold: specifies the FIFO reception threshold. + * This parameter can be one of the following values: + * @arg SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2. + * @arg SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO + * level is greater or equal to 1/4. + * @retval None + */ +void SPI_RxFIFOThresholdConfig(SPI_TypeDef* SPIx, uint16_t SPI_RxFIFOThreshold) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_RX_FIFO_THRESHOLD(SPI_RxFIFOThreshold)); + + /* Clear FRXTH bit */ + SPIx->CR2 &= (uint16_t)~((uint16_t)SPI_CR2_FRXTH); + + /* Set new FRXTH bit value */ + SPIx->CR2 |= SPI_RxFIFOThreshold; +} + +/** + * @brief Selects the data transfer direction in bidirectional mode for the specified SPI. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_Direction: specifies the data transfer direction in bidirectional mode. + * This parameter can be one of the following values: + * @arg SPI_Direction_Tx: Selects Tx transmission direction + * @arg SPI_Direction_Rx: Selects Rx receive direction + * @retval None + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DIRECTION(SPI_Direction)); + if (SPI_Direction == SPI_Direction_Tx) + { + /* Set the Tx only mode */ + SPIx->CR1 |= SPI_Direction_Tx; + } + else + { + /* Set the Rx only mode */ + SPIx->CR1 &= SPI_Direction_Rx; + } +} + +/** + * @brief Configures internally by software the NSS pin for the selected SPI. + * @note This function can be called only after the SPI_Init() function has + * been called. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. + * This parameter can be one of the following values: + * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally + * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally + * @retval None + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); + + if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + /* Set NSS pin internally by software */ + SPIx->CR1 |= SPI_NSSInternalSoft_Set; + } + else + { + /* Reset NSS pin internally by software */ + SPIx->CR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/** + * @brief Enables or disables the SS output for the selected SPI. + * @note This function can be called only after the SPI_Init() function has + * been called and the NSS hardware management mode is selected. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param NewState: new state of the SPIx SS output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI SS output */ + SPIx->CR2 |= SPI_CR2_SSOE; + } + else + { + /* Disable the selected SPI SS output */ + SPIx->CR2 &= (uint16_t)~((uint16_t)SPI_CR2_SSOE); + } +} + +/** + * @brief Enables or disables the NSS pulse management mode. + * @note This function can be called only after the SPI_Init() function has + * been called. + * @note When TI mode is selected, the control bits NSSP is not taken into + * consideration and are configured by hardware respectively to the + * TI mode requirements. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param NewState: new state of the NSS pulse management mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_NSSPulseModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the NSS pulse management mode */ + SPIx->CR2 |= SPI_CR2_NSSP; + } + else + { + /* Disable the NSS pulse management mode */ + SPIx->CR2 &= (uint16_t)~((uint16_t)SPI_CR2_NSSP); + } +} + +/** + * @} + */ + +/** @defgroup SPI_Group2 Data transfers functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### Data transfers functions ##### + =============================================================================== + [..] This section provides a set of functions allowing to manage the SPI or I2S + data transfers. + + [..] In reception, data are received and then stored into an internal Rx buffer while + In transmission, data are first stored into an internal Tx buffer before being + transmitted. + + [..] The read access of the SPI_DR register can be done using + SPI_ReceiveData8() (when data size is equal or inferior than 8bits) and. + SPI_I2S_ReceiveData16() (when data size is superior than 8bits)function + and returns the Rx buffered value. Whereas a write access to the SPI_DR + can be done using SPI_SendData8() (when data size is equal or inferior than 8bits) + and SPI_I2S_SendData16() (when data size is superior than 8bits) function + and stores the written data into Tx buffer. + +@endverbatim + * @{ + */ + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: where x can be 1 or 2 in SPI mode to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param Data: Data to be transmitted. + * @retval None + */ +void SPI_SendData8(SPI_TypeDef* SPIx, uint8_t Data) +{ + uint32_t spixbase = 0x00; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + spixbase = (uint32_t)SPIx; + spixbase += 0x0C; + + *(__IO uint8_t *) spixbase = Data; +} + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: where x can be 1 or 2 in SPI mode or 1 in I2S mode to select + * the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param Data: Data to be transmitted. + * @retval None + */ +void SPI_I2S_SendData16(SPI_TypeDef* SPIx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + SPIx->DR = (uint16_t)Data; +} + +/** + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * @param SPIx: where x can be 1 or 2 in SPI mode to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @retval The value of the received data. + */ +uint8_t SPI_ReceiveData8(SPI_TypeDef* SPIx) +{ + uint32_t spixbase = 0x00; + + spixbase = (uint32_t)SPIx; + spixbase += 0x0C; + + return *(__IO uint8_t *) spixbase; +} + +/** + * @brief Returns the most recent received data by the SPIx peripheral. + * @param SPIx: where x can be 1 or 2 in SPI mode or 1 in I2S mode to select + * @note SPI2 is not available for STM32F031 devices. + * the SPI peripheral. + * @retval The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData16(SPI_TypeDef* SPIx) +{ + return SPIx->DR; +} +/** + * @} + */ + +/** @defgroup SPI_Group3 Hardware CRC Calculation functions + * @brief Hardware CRC Calculation functions + * +@verbatim + =============================================================================== + ##### Hardware CRC Calculation functions ##### + =============================================================================== + [..] This section provides a set of functions allowing to manage the SPI CRC hardware + calculation.SPI communication using CRC is possible through the following procedure: + + (#) Program the Data direction, Polarity, Phase, First Data, Baud Rate Prescaler, + Slave Management, Peripheral Mode and CRC Polynomial values using the SPI_Init() + function. + (#) Enable the CRC calculation using the SPI_CalculateCRC() function. + (#) Enable the SPI using the SPI_Cmd() function + (#) Before writing the last data to the TX buffer, set the CRCNext bit using the + SPI_TransmitCRC() function to indicate that after transmission of the last + data, the CRC should be transmitted. + (#) After transmitting the last data, the SPI transmits the CRC. The SPI_CR1_CRCNEXT + bit is reset. The CRC is also received and compared against the SPI_RXCRCR + value. + If the value does not match, the SPI_FLAG_CRCERR flag is set and an interrupt + can be generated when the SPI_I2S_IT_ERR interrupt is enabled. + + -@- + (+@) It is advised to don't read the calculate CRC values during the communication. + (+@) When the SPI is in slave mode, be careful to enable CRC calculation only + when the clock is stable, that is, when the clock is in the steady state. + If not, a wrong CRC calculation may be done. In fact, the CRC is sensitive + to the SCK slave input clock as soon as CRCEN is set, and this, whatever + the value of the SPE bit. + (+@) With high bitrate frequencies, be careful when transmitting the CRC. + As the number of used CPU cycles has to be as low as possible in the CRC + transfer phase, it is forbidden to call software functions in the CRC + transmission sequence to avoid errors in the last data and CRC reception. + In fact, CRCNEXT bit has to be written before the end of the transmission/reception + of the last data. + (+@) For high bit rate frequencies, it is advised to use the DMA mode to avoid the + degradation of the SPI speed performance due to CPU accesses impacting the + SPI bandwidth. + (+@) When the STM32F0xx are configured as slaves and the NSS hardware mode is + used, the NSS pin needs to be kept low between the data phase and the CRC + phase. + (+@) When the SPI is configured in slave mode with the CRC feature enabled, CRC + calculation takes place even if a high level is applied on the NSS pin. + This may happen for example in case of a multislave environment where the + communication master addresses slaves alternately. + (+@) Between a slave deselection (high level on NSS) and a new slave selection + (low level on NSS), the CRC value should be cleared on both master and slave + sides in order to resynchronize the master and slave for their respective + CRC calculation. + + -@- To clear the CRC, follow the procedure below: + (#@) Disable SPI using the SPI_Cmd() function + (#@) Disable the CRC calculation using the SPI_CalculateCRC() function. + (#@) Enable the CRC calculation using the SPI_CalculateCRC() function. + (#@) Enable SPI using the SPI_Cmd() function. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the CRC calculation length for the selected SPI. + * @note This function can be called only after the SPI_Init() function has + * been called. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_CRCLength: specifies the SPI CRC calculation length. + * This parameter can be one of the following values: + * @arg SPI_CRCLength_8b: Set CRC Calculation to 8 bits + * @arg SPI_CRCLength_16b: Set CRC Calculation to 16 bits + * @retval None + */ +void SPI_CRCLengthConfig(SPI_TypeDef* SPIx, uint16_t SPI_CRCLength) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC_LENGTH(SPI_CRCLength)); + + /* Clear CRCL bit */ + SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_CRCL); + + /* Set new CRCL bit value */ + SPIx->CR1 |= SPI_CRCLength; +} + +/** + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * @note This function can be called only after the SPI_Init() function has + * been called. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param NewState: new state of the SPIx CRC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected SPI CRC calculation */ + SPIx->CR1 |= SPI_CR1_CRCEN; + } + else + { + /* Disable the selected SPI CRC calculation */ + SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_CRCEN); + } +} + +/** + * @brief Transmit the SPIx CRC value. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @retval None + */ +void SPI_TransmitCRC(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Enable the selected SPI CRC transmission */ + SPIx->CR1 |= SPI_CR1_CRCNEXT; +} + +/** + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_CRC: specifies the CRC register to be read. + * This parameter can be one of the following values: + * @arg SPI_CRC_Tx: Selects Tx CRC register + * @arg SPI_CRC_Rx: Selects Rx CRC register + * @retval The selected CRC register value.. + */ +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC(SPI_CRC)); + + if (SPI_CRC != SPI_CRC_Rx) + { + /* Get the Tx CRC register */ + crcreg = SPIx->TXCRCR; + } + else + { + /* Get the Rx CRC register */ + crcreg = SPIx->RXCRCR; + } + /* Return the selected CRC register */ + return crcreg; +} + +/** + * @brief Returns the CRC Polynomial register value for the specified SPI. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @retval The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the CRC polynomial register */ + return SPIx->CRCPR; +} + +/** + * @} + */ + +/** @defgroup SPI_Group4 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + ##### DMA transfers management functions ##### + =============================================================================== + [..] This section provides two functions that can be used only in DMA mode. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * @param SPIx: where x can be 1 or 2 in SPI mode or 1 in I2S mode to select + * the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * I2S mode is not supported for STM32F030 devices. + * @param SPI_I2S_DMAReq: specifies the SPI DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request + * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request + * @param NewState: new state of the selected SPI DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_DMA_REQ(SPI_I2S_DMAReq)); + + if (NewState != DISABLE) + { + /* Enable the selected SPI DMA requests */ + SPIx->CR2 |= SPI_I2S_DMAReq; + } + else + { + /* Disable the selected SPI DMA requests */ + SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/** + * @brief Configures the number of data to transfer type(Even/Odd) for the DMA + * last transfers and for the selected SPI. + * @note This function have a meaning only if DMA mode is selected and if + * the packing mode is used (data length <= 8 and DMA transfer size halfword) + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @param SPI_LastDMATransfer: specifies the SPI last DMA transfers state. + * This parameter can be one of the following values: + * @arg SPI_LastDMATransfer_TxEvenRxEven: Number of data for transmission Even + * and number of data for reception Even. + * @arg SPI_LastDMATransfer_TxOddRxEven: Number of data for transmission Odd + * and number of data for reception Even. + * @arg SPI_LastDMATransfer_TxEvenRxOdd: Number of data for transmission Even + * and number of data for reception Odd. + * @arg SPI_LastDMATransfer_TxOddRxOdd: Number of data for transmission Odd + * and number of data for reception Odd. + * @retval None + */ +void SPI_LastDMATransferCmd(SPI_TypeDef* SPIx, uint16_t SPI_LastDMATransfer) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_LAST_DMA_TRANSFER(SPI_LastDMATransfer)); + + /* Clear LDMA_TX and LDMA_RX bits */ + SPIx->CR2 &= CR2_LDMA_MASK; + + /* Set new LDMA_TX and LDMA_RX bits value */ + SPIx->CR2 |= SPI_LastDMATransfer; +} + +/** + * @} + */ + +/** @defgroup SPI_Group5 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This section provides a set of functions allowing to configure the SPI/I2S Interrupts + sources and check or clear the flags or pending bits status. + The user should identify which mode will be used in his application to manage + the communication: Polling mode, Interrupt mode or DMA mode. + + *** Polling Mode *** + ==================== + [..] In Polling Mode, the SPI/I2S communication can be managed by 9 flags: + (#) SPI_I2S_FLAG_TXE : to indicate the status of the transmit buffer register + (#) SPI_I2S_FLAG_RXNE : to indicate the status of the receive buffer register + (#) SPI_I2S_FLAG_BSY : to indicate the state of the communication layer of the SPI. + (#) SPI_FLAG_CRCERR : to indicate if a CRC Calculation error occur + (#) SPI_FLAG_MODF : to indicate if a Mode Fault error occur + (#) SPI_I2S_FLAG_OVR : to indicate if an Overrun error occur + (#) SPI_I2S_FLAG_FRE: to indicate a Frame Format error occurs. + (#) I2S_FLAG_UDR: to indicate an Underrun error occurs. + (#) I2S_FLAG_CHSIDE: to indicate Channel Side. + + [..] + (@)Do not use the BSY flag to handle each data transmission or reception. It is better + to use the TXE and RXNE flags instead. + + [..] In this Mode it is advised to use the following functions: + (+) FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); + (+) void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); + + *** Interrupt Mode *** + ====================== + [..] In Interrupt Mode, the SPI/I2S communication can be managed by 3 interrupt sources + and 5 pending bits: + [..] Pending Bits: + (#) SPI_I2S_IT_TXE : to indicate the status of the transmit buffer register + (#) SPI_I2S_IT_RXNE : to indicate the status of the receive buffer register + (#) SPI_I2S_IT_OVR : to indicate if an Overrun error occur + (#) I2S_IT_UDR : to indicate an Underrun Error occurs. + (#) SPI_I2S_FLAG_FRE : to indicate a Frame Format error occurs. + + [..] Interrupt Source: + (#) SPI_I2S_IT_TXE: specifies the interrupt source for the Tx buffer empty + interrupt. + (#) SPI_I2S_IT_RXNE : specifies the interrupt source for the Rx buffer not + empty interrupt. + (#) SPI_I2S_IT_ERR : specifies the interrupt source for the errors interrupt. + + [..] In this Mode it is advised to use the following functions: + (+) void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); + (+) ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + + *** FIFO Status *** + =================== + [..] It is possible to monitor the FIFO status when a transfer is ongoing using the + following function: + (+) uint32_t SPI_GetFIFOStatus(uint8_t SPI_FIFO_Direction); + + *** DMA Mode *** + ================ + [..] In DMA Mode, the SPI communication can be managed by 2 DMA Channel + requests: + (#) SPI_I2S_DMAReq_Tx: specifies the Tx buffer DMA transfer request. + (#) SPI_I2S_DMAReq_Rx: specifies the Rx buffer DMA transfer request. + + [..] In this Mode it is advised to use the following function: + (+) void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified SPI/I2S interrupts. + * @param SPIx: where x can be 1 or 2 in SPI mode or 1 in I2S mode to select + * the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * I2S mode is not supported for STM32F030 devices. + * @param SPI_I2S_IT: specifies the SPI interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask + * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask + * @arg SPI_I2S_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified SPI interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0 ; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); + + /* Get the SPI IT index */ + itpos = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = (uint16_t)1 << (uint16_t)itpos; + + if (NewState != DISABLE) + { + /* Enable the selected SPI interrupt */ + SPIx->CR2 |= itmask; + } + else + { + /* Disable the selected SPI interrupt */ + SPIx->CR2 &= (uint16_t)~itmask; + } +} + +/** + * @brief Returns the current SPIx Transmission FIFO filled level. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @retval The Transmission FIFO filling state. + * - SPI_TransmissionFIFOStatus_Empty: when FIFO is empty + * - SPI_TransmissionFIFOStatus_1QuarterFull: if more than 1 quarter-full. + * - SPI_TransmissionFIFOStatus_HalfFull: if more than 1 half-full. + * - SPI_TransmissionFIFOStatus_Full: when FIFO is full. + */ +uint16_t SPI_GetTransmissionFIFOStatus(SPI_TypeDef* SPIx) +{ + /* Get the SPIx Transmission FIFO level bits */ + return (uint16_t)((SPIx->SR & SPI_SR_FTLVL)); +} + +/** + * @brief Returns the current SPIx Reception FIFO filled level. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * @retval The Reception FIFO filling state. + * - SPI_ReceptionFIFOStatus_Empty: when FIFO is empty + * - SPI_ReceptionFIFOStatus_1QuarterFull: if more than 1 quarter-full. + * - SPI_ReceptionFIFOStatus_HalfFull: if more than 1 half-full. + * - SPI_ReceptionFIFOStatus_Full: when FIFO is full. + */ +uint16_t SPI_GetReceptionFIFOStatus(SPI_TypeDef* SPIx) +{ + /* Get the SPIx Reception FIFO level bits */ + return (uint16_t)((SPIx->SR & SPI_SR_FRLVL)); +} + +/** + * @brief Checks whether the specified SPI flag is set or not. + * @param SPIx: where x can be 1 or 2 in SPI mode or 1 in I2S mode to select + * the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * I2S mode is not supported for STM32F030 devices. + * @param SPI_I2S_FLAG: specifies the SPI flag to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. + * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. + * @arg SPI_I2S_FLAG_BSY: Busy flag. + * @arg SPI_I2S_FLAG_OVR: Overrun flag. + * @arg SPI_FLAG_MODF: Mode Fault flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * @arg SPI_I2S_FLAG_FRE: TI frame format error flag. + * @arg I2S_FLAG_UDR: Underrun Error flag. + * @arg I2S_FLAG_CHSIDE: Channel Side flag. + * @retval The new state of SPI_I2S_FLAG (SET or RESET). + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); + + /* Check the status of the specified SPI flag */ + if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + /* SPI_I2S_FLAG is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_FLAG is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * @param SPIx: where x can be 1 or 2 to select the SPI peripheral. + * @note SPI2 is not available for STM32F031 devices. + * I2S mode is not supported for STM32F030 devices. + * @param SPI_I2S_FLAG: specifies the SPI flag to clear. + * This function clears only CRCERR flag. + * @note OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by + * a read operation to SPI_SR register (SPI_I2S_GetFlagStatus()). + * @note MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by + * a write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). + * @retval None + */ +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CLEAR_FLAG(SPI_I2S_FLAG)); + + /* Clear the selected SPI CRC Error (CRCERR) flag */ + SPIx->SR = (uint16_t)~SPI_I2S_FLAG; +} + +/** + * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. + * @param SPIx: where x can be 1 or 2 in SPI mode or 1 in I2S mode to select + * the SPI peripheral. + * @param SPI_I2S_IT: specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. + * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. + * @arg SPI_IT_MODF: Mode Fault interrupt. + * @arg SPI_I2S_IT_OVR: Overrun interrupt. + * @arg I2S_IT_UDR: Underrun interrupt. + * @arg SPI_I2S_IT_FRE: Format Error interrupt. + * @retval The new state of SPI_I2S_IT (SET or RESET). + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); + + /* Get the SPI_I2S_IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Get the SPI_I2S_IT IT mask */ + itmask = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = 0x01 << itmask; + + /* Get the SPI_I2S_IT enable bit status */ + enablestatus = (SPIx->CR2 & itmask) ; + + /* Check the status of the specified SPI interrupt */ + if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) + { + /* SPI_I2S_IT is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_IT is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_IT status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_syscfg.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_syscfg.c new file mode 100644 index 0000000..b4dd93d --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_syscfg.c @@ -0,0 +1,412 @@ +/** + ****************************************************************************** + * @file stm32f0xx_syscfg.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the SYSCFG peripheral: + * + Remapping the memory mapped at 0x00000000 + * + Remapping the DMA channels + * + Enabling I2C fast mode plus driving capability for I2C pins + * + Configuring the EXTI lines connection to the GPIO port + * + Configuring the CFGR2 features (Connecting some internal signal + * to the break input of TIM1) + * + * @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The SYSCFG registers can be accessed only when the SYSCFG + interface APB clock is enabled. + To enable SYSCFG APB clock use: + RCC_APBPeriphClockCmd(RCC_APBPeriph_SYSCFG, ENABLE). + * @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_syscfg.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup SYSCFG + * @brief SYSCFG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SYSCFG_Private_Functions + * @{ + */ + +/** @defgroup SYSCFG_Group1 SYSCFG Initialization and Configuration functions + * @brief SYSCFG Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### SYSCFG Initialization and Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the SYSCFG registers to their default reset values. + * @param None + * @retval None + * @note MEM_MODE bits are not affected by APB reset. + * @note MEM_MODE bits took the value from the user option bytes. + * @note CFGR2 register is not affected by APB reset. + * @note CLABBB configuration bits are locked when set. + * @note To unlock the configuration, perform a system reset. + */ +void SYSCFG_DeInit(void) +{ + /* Set SYSCFG_CFGR1 register to reset value without affecting MEM_MODE bits */ + SYSCFG->CFGR1 &= SYSCFG_CFGR1_MEM_MODE; + /* Set EXTICRx registers to reset value */ + SYSCFG->EXTICR[0] = 0; + SYSCFG->EXTICR[1] = 0; + SYSCFG->EXTICR[2] = 0; + SYSCFG->EXTICR[3] = 0; + /* Set CFGR2 register to reset value: clear SRAM parity error flag */ + SYSCFG->CFGR2 |= (uint32_t) SYSCFG_CFGR2_SRAM_PE; +} + +/** + * @brief Configures the memory mapping at address 0x00000000. + * @param SYSCFG_MemoryRemap: selects the memory remapping. + * This parameter can be one of the following values: + * @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000 + * @arg SYSCFG_MemoryRemap_SystemMemory: System Flash memory mapped at 0x00000000 + * @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM mapped at 0x00000000 + * @retval None + */ +void SYSCFG_MemoryRemapConfig(uint32_t SYSCFG_MemoryRemap) +{ + uint32_t tmpctrl = 0; + + /* Check the parameter */ + assert_param(IS_SYSCFG_MEMORY_REMAP(SYSCFG_MemoryRemap)); + + /* Get CFGR1 register value */ + tmpctrl = SYSCFG->CFGR1; + + /* Clear MEM_MODE bits */ + tmpctrl &= (uint32_t) (~SYSCFG_CFGR1_MEM_MODE); + + /* Set the new MEM_MODE bits value */ + tmpctrl |= (uint32_t) SYSCFG_MemoryRemap; + + /* Set CFGR1 register with the new memory remap configuration */ + SYSCFG->CFGR1 = tmpctrl; +} + +/** + * @brief Configure the DMA channels remapping. + * @param SYSCFG_DMARemap: selects the DMA channels remap. + * This parameter can be one of the following values: + * @arg SYSCFG_DMARemap_TIM17: Remap TIM17 DMA requests from channel1 to channel2 + * @arg SYSCFG_DMARemap_TIM16: Remap TIM16 DMA requests from channel3 to channel4 + * @arg SYSCFG_DMARemap_USART1Rx: Remap USART1 Rx DMA requests from channel3 to channel5 + * @arg SYSCFG_DMARemap_USART1Tx: Remap USART1 Tx DMA requests from channel2 to channel4 + * @arg SYSCFG_DMARemap_ADC1: Remap ADC1 DMA requests from channel1 to channel2 + * @param NewState: new state of the DMA channel remapping. + * This parameter can be: ENABLE or DISABLE. + * @note When enabled, DMA channel of the selected peripheral is remapped + * @note When disabled, Default DMA channel is mapped to the selected peripheral + * @note By default TIM17 DMA requests is mapped to channel 1, + * use SYSCFG_DMAChannelRemapConfig(SYSCFG_DMARemap_TIM17, Enable) to remap + * TIM17 DMA requests to channel 2 and use + * SYSCFG_DMAChannelRemapConfig(SYSCFG_DMARemap_TIM17, Disable) to map + * TIM17 DMA requests to channel 1 (default mapping) + * @note This function is only used for STM32F030, STM32F031, STM32F042, STM32F072 and STM32F051 devices. + * @retval None + */ +void SYSCFG_DMAChannelRemapConfig(uint32_t SYSCFG_DMARemap, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_DMA_REMAP(SYSCFG_DMARemap)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Remap the DMA channel */ + SYSCFG->CFGR1 |= (uint32_t)SYSCFG_DMARemap; + } + else + { + /* use the default DMA channel mapping */ + SYSCFG->CFGR1 &= (uint32_t)(~SYSCFG_DMARemap); + } +} + +/** + * @brief Configure the I2C fast mode plus driving capability. + * @param SYSCFG_I2CFastModePlus: selects the pin. + * This parameter can be one of the following values: + * @arg SYSCFG_I2CFastModePlus_PB6: Configure fast mode plus driving capability for PB6 + * @arg SYSCFG_I2CFastModePlus_PB7: Configure fast mode plus driving capability for PB7 + * @arg SYSCFG_I2CFastModePlus_PB8: Configure fast mode plus driving capability for PB8 + * @arg SYSCFG_I2CFastModePlus_PB9: Configure fast mode plus driving capability for PB9 + * @arg SYSCFG_I2CFastModePlus_PA9: Configure fast mode plus driving capability for PA9 (only for STM32F031 and STM32F030 devices) + * @arg SYSCFG_I2CFastModePlus_PA10: Configure fast mode plus driving capability for PA10 (only for STM32F031 and STM32F030 devices) + * @arg SYSCFG_I2CFastModePlus_I2C1: Configure fast mode plus driving capability for PB10, PB11, PF6 and PF7(only for STM32F031 and STM32F030 devices) + * @arg SYSCFG_I2CFastModePlus_I2C2: Configure fast mode plus driving capability for I2C2 pins, available only for STM32F072 devices + * + * @param NewState: new state of the DMA channel remapping. + * This parameter can be: ENABLE or DISABLE. + * @note ENABLE: Enable fast mode plus driving capability for selected I2C pin + * @note DISABLE: Disable fast mode plus driving capability for selected I2C pin + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using SYSCFG_I2CFastModePlus_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using SYSCFG_I2CFastModePlus_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using SYSCFG_I2CFastModePlus_I2C2 parameter. + * @retval None + */ +void SYSCFG_I2CFastModePlusConfig(uint32_t SYSCFG_I2CFastModePlus, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_I2C_FMP(SYSCFG_I2CFastModePlus)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable fast mode plus driving capability for selected pin */ + SYSCFG->CFGR1 |= (uint32_t)SYSCFG_I2CFastModePlus; + } + else + { + /* Disable fast mode plus driving capability for selected pin */ + SYSCFG->CFGR1 &= (uint32_t)(~SYSCFG_I2CFastModePlus); + } +} + +/** @brief select the modulation envelope source + * @param SYSCFG_IRDAEnv: select the envelope source. + * This parameter can be a value + * @arg SYSCFG_IRDA_ENV_SEL_TIM16 + * @arg SYSCFG_IRDA_ENV_SEL_USART1 + * @arg SYSCFG_IRDA_ENV_SEL_USART4 + * @retval None + */ +void SYSCFG_IRDAEnvSelection(uint32_t SYSCFG_IRDAEnv) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_IRDA_ENV(SYSCFG_IRDAEnv)); + + SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); + SYSCFG->CFGR1 |= (SYSCFG_IRDAEnv); +} + +/** + * @brief Selects the GPIO pin used as EXTI Line. + * @param EXTI_PortSourceGPIOx: selects the GPIO port to be used as source + * for EXTI lines where x can be (A, B, C, D, E or F). + * @note GPIOE is available only for STM32F072. + * @note GPIOD is not available for STM32F031. + * @param EXTI_PinSourcex: specifies the EXTI line to be configured. + * @note This parameter can be EXTI_PinSourcex where x can be: + * For STM32F051 and STM32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF. + * For STM32F072: (0..15) for GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, (0..10) for GPIOF. + * For STM32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF. + * @retval None + */ +void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex) +{ + uint32_t tmp = 0x00; + + /* Check the parameters */ + assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx)); + assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex)); + + tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)); + SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp; + SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03))); +} + +/** + * @brief check ISR wrapper: Allow to determine interrupt source per line . + * @param IT_Source: specifies the interrupt source to check. + * This parameter can be one of the following values: + * @arg ITLINE_EWDG EWDG has expired + * @arg ITLINE_PVDOUT Power voltage detection Interrupt + * @arg ITLINE_VDDIO2 VDDIO2 Interrupt + * @arg ITLINE_RTC_WAKEUP RTC WAKEUP -> exti[20] Interrupt + * @arg ITLINE_RTC_TSTAMP RTC Time Stamp -> exti[19] interrupt + * @arg ITLINE_RTC_ALRA RTC Alarm -> exti[17] interrupt + * @arg ITLINE_FLASH_ITF Flash ITF Interrupt + * @arg ITLINE_CRS CRS Interrupt + * @arg ITLINE_CLK_CTRL CLK Control Interrupt + * @arg ITLINE_EXTI0 External Interrupt 0 + * @arg ITLINE_EXTI1 External Interrupt 1 + * @arg ITLINE_EXTI2 External Interrupt 2 + * @arg ITLINE_EXTI3 External Interrupt 3 + * @arg ITLINE_EXTI4 External Interrupt 4 + * @arg ITLINE_EXTI5 External Interrupt 5 + * @arg ITLINE_EXTI6 External Interrupt 6 + * @arg ITLINE_EXTI7 External Interrupt 7 + * @arg ITLINE_EXTI8 External Interrupt 8 + * @arg ITLINE_EXTI9 External Interrupt 9 + * @arg ITLINE_EXTI10 External Interrupt 10 + * @arg ITLINE_EXTI11 External Interrupt 11 + * @arg ITLINE_EXTI12 External Interrupt 12 + * @arg ITLINE_EXTI13 External Interrupt 13 + * @arg ITLINE_EXTI14 External Interrupt 14 + * @arg ITLINE_EXTI15 External Interrupt 15 + * @arg ITLINE_TSC_EOA Touch control EOA Interrupt + * @arg ITLINE_TSC_MCE Touch control MCE Interrupt + * @arg ITLINE_DMA1_CH1 DMA1 Channel 1 Interrupt + * @arg ITLINE_DMA1_CH2 DMA1 Channel 2 Interrupt + * @arg ITLINE_DMA1_CH3 DMA1 Channel 3 Interrupt + * @arg ITLINE_DMA2_CH1 DMA2 Channel 1 Interrupt + * @arg ITLINE_DMA2_CH2 DMA2 Channel 2 Interrupt + * @arg ITLINE_DMA1_CH4 DMA1 Channel 4 Interrupt + * @arg ITLINE_DMA1_CH5 DMA1 Channel 5 Interrupt + * @arg ITLINE_DMA1_CH6 DMA1 Channel 6 Interrupt + * @arg ITLINE_DMA1_CH7 DMA1 Channel 7 Interrupt + * @arg ITLINE_DMA2_CH3 DMA2 Channel 3 Interrupt + * @arg ITLINE_DMA2_CH4 DMA2 Channel 4 Interrupt + * @arg ITLINE_DMA2_CH5 DMA2 Channel 5 Interrupt + * @arg ITLINE_ADC ADC Interrupt + * @arg ITLINE_COMP1 COMP1 Interrupt -> exti[21] + * @arg ITLINE_COMP2 COMP2 Interrupt -> exti[21] + * @arg ITLINE_TIM1_BRK TIM1 BRK Interrupt + * @arg ITLINE_TIM1_UPD TIM1 UPD Interrupt + * @arg ITLINE_TIM1_TRG TIM1 TRG Interrupt + * @arg ITLINE_TIM1_CCU TIM1 CCU Interrupt + * @arg ITLINE_TIM1_CC TIM1 CC Interrupt + * @arg ITLINE_TIM2 TIM2 Interrupt + * @arg ITLINE_TIM3 TIM3 Interrupt + * @arg ITLINE_DAC DAC Interrupt + * @arg ITLINE_TIM6 TIM6 Interrupt + * @arg ITLINE_TIM7 TIM7 Interrupt + * @arg ITLINE_TIM14 TIM14 Interrupt + * @arg ITLINE_TIM15 TIM15 Interrupt + * @arg ITLINE_TIM16 TIM16 Interrupt + * @arg ITLINE_TIM17 TIM17 Interrupt + * @arg ITLINE_I2C1 I2C1 Interrupt -> exti[23] + * @arg ITLINE_I2C2 I2C2 Interrupt + * @arg ITLINE_SPI1 I2C1 Interrupt -> exti[23] + * @arg ITLINE_SPI2 SPI1 Interrupt + * @arg ITLINE_USART1 USART1 GLB Interrupt -> exti[25] + * @arg ITLINE_USART2 USART2 GLB Interrupt -> exti[26] + * @arg ITLINE_USART3 USART3 Interrupt + * @arg ITLINE_USART4 USART4 Interrupt + * @arg ITLINE_USART5 USART5 Interrupt + * @arg ITLINE_USART6 USART6 Interrupt + * @arg ITLINE_USART7 USART7 Interrupt + * @arg ITLINE_USART8 USART8 Interrupt + * @arg ITLINE_CAN CAN Interrupt + * @arg ITLINE_CEC CEC Interrupt + * @retval The new state of IT_LINE_SR. + */ +uint32_t SYSCFG_GetPendingIT(uint32_t ITSourceLine) +{ + assert_param(IS_SYSCFG_ITLINE(ITSourceLine)); + return(SYSCFG->IT_LINE_SR[(ITSourceLine >> 0x18)] & (ITSourceLine & 0x00FFFFFF)); +} + +/** + * @brief Connect the selected parameter to the break input of TIM1. + * @note The selected configuration is locked and can be unlocked by system reset + * @param SYSCFG_Break: selects the configuration to be connected to break + * input of TIM1 + * This parameter can be any combination of the following values: + * @arg SYSCFG_Break_PVD: Connects the PVD event to the Break Input of TIM1,, not available for STM32F030 devices. + * @arg SYSCFG_Break_SRAMParity: Connects the SRAM_PARITY error signal to the Break Input of TIM1 . + * @arg SYSCFG_Break_Lockup: Connects Lockup output of CortexM0 to the break input of TIM1. + * @retval None + */ +void SYSCFG_BreakConfig(uint32_t SYSCFG_Break) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_LOCK_CONFIG(SYSCFG_Break)); + + SYSCFG->CFGR2 |= (uint32_t) SYSCFG_Break; +} + +/** + * @brief Checks whether the specified SYSCFG flag is set or not. + * @param SYSCFG_Flag: specifies the SYSCFG flag to check. + * This parameter can be one of the following values: + * @arg SYSCFG_FLAG_PE: SRAM parity error flag. + * @retval The new state of SYSCFG_Flag (SET or RESET). + */ +FlagStatus SYSCFG_GetFlagStatus(uint32_t SYSCFG_Flag) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameter */ + assert_param(IS_SYSCFG_FLAG(SYSCFG_Flag)); + + /* Check the status of the specified SPI flag */ + if ((SYSCFG->CFGR2 & SYSCFG_CFGR2_SRAM_PE) != (uint32_t)RESET) + { + /* SYSCFG_Flag is set */ + bitstatus = SET; + } + else + { + /* SYSCFG_Flag is reset */ + bitstatus = RESET; + } + /* Return the SYSCFG_Flag status */ + return bitstatus; +} + +/** + * @brief Clear the selected SYSCFG flag. + * @param SYSCFG_Flag: selects the flag to be cleared. + * This parameter can be any combination of the following values: + * @arg SYSCFG_FLAG_PE: SRAM parity error flag. + * @retval None + */ +void SYSCFG_ClearFlag(uint32_t SYSCFG_Flag) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_FLAG(SYSCFG_Flag)); + + SYSCFG->CFGR2 |= (uint32_t) SYSCFG_Flag; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_tim.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_tim.c new file mode 100644 index 0000000..124c8b9 --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_tim.c @@ -0,0 +1,3341 @@ +/** + ****************************************************************************** + * @file stm32f0xx_tim.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the TIM peripheral: + * + TimeBase management + * + Output Compare management + * + Input Capture management + * + Interrupts, DMA and flags management + * + Clocks management + * + Synchronization management + * + Specific interface management + * + Specific remapping management + * + * @verbatim + + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] This driver provides functions to configure and program the TIM + of all STM32F0xx devices These functions are split in 8 groups: + (#) TIM TimeBase management: this group includes all needed functions + to configure the TM Timebase unit: + (++) Set/Get Prescaler. + (++) Set/Get Autoreload. + (++) Counter modes configuration. + (++) Set Clock division. + (++) Select the One Pulse mode. + (++) Update Request Configuration. + (++) Update Disable Configuration. + (++) Auto-Preload Configuration. + (++) Enable/Disable the counter. + + (#) TIM Output Compare management: this group includes all needed + functions to configure the Capture/Compare unit used in Output + compare mode: + (++) Configure each channel, independently, in Output Compare mode. + (++) Select the output compare modes. + (++) Select the Polarities of each channel. + (++) Set/Get the Capture/Compare register values. + (++) Select the Output Compare Fast mode. + (++) Select the Output Compare Forced mode. + (++) Output Compare-Preload Configuration. + (++) Clear Output Compare Reference. + (++) Select the OCREF Clear signal. + (++) Enable/Disable the Capture/Compare Channels. + + (#) TIM Input Capture management: this group includes all needed + functions to configure the Capture/Compare unit used in + Input Capture mode: + (++) Configure each channel in input capture mode. + (++) Configure Channel1/2 in PWM Input mode. + (++) Set the Input Capture Prescaler. + (++) Get the Capture/Compare values. + + (#) Advanced-control timers (TIM1) specific features + (++) Configures the Break input, dead time, Lock level, the OSSI, + the OSSR State and the AOE(automatic output enable) + (++) Enable/Disable the TIM peripheral Main Outputs + (++) Select the Commutation event + (++) Set/Reset the Capture Compare Preload Control bit + + (#) TIM interrupts, DMA and flags management. + (++) Enable/Disable interrupt sources. + (++) Get flags status. + (++) Clear flags/ Pending bits. + (++) Enable/Disable DMA requests. + (++) Configure DMA burst mode. + (++) Select CaptureCompare DMA request. + + (#) TIM clocks management: this group includes all needed functions + to configure the clock controller unit: + (++) Select internal/External clock. + (++) Select the external clock mode: ETR(Mode1/Mode2), TIx or ITRx. + + (#) TIM synchronization management: this group includes all needed. + functions to configure the Synchronization unit: + (++) Select Input Trigger. + (++) Select Output Trigger. + (++) Select Master Slave Mode. + (++) ETR Configuration when used as external trigger. + + (#) TIM specific interface management, this group includes all + needed functions to use the specific TIM interface: + (++) Encoder Interface Configuration. + (++) Select Hall Sensor. + + (#) TIM specific remapping management includes the Remapping + configuration of specific timers + +@endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_tim.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup TIM + * @brief TIM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ---------------------- TIM registers bit mask ------------------------ */ +#define SMCR_ETR_MASK ((uint16_t)0x00FF) +#define CCMR_OFFSET ((uint16_t)0x0018) +#define CCER_CCE_SET ((uint16_t)0x0001) +#define CCER_CCNE_SET ((uint16_t)0x0004) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup TIM_Private_Functions + * @{ + */ + +/** @defgroup TIM_Group1 TimeBase management functions + * @brief TimeBase management functions + * +@verbatim + =============================================================================== + ##### TimeBase management functions ##### + =============================================================================== + + *** TIM Driver: how to use it in Timing(Time base) Mode *** + =============================================================================== + [..] To use the Timer in Timing(Time base) mode, the following steps are + mandatory: + (#) Enable TIM clock using + RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function. + (#) Fill the TIM_TimeBaseInitStruct with the desired parameters. + (#) Call TIM_TimeBaseInit(TIMx, &TIM_TimeBaseInitStruct) to configure + the Time Base unit with the corresponding configuration. + (#) Enable the NVIC if you need to generate the update interrupt. + (#) Enable the corresponding interrupt using the function + TIM_ITConfig(TIMx, TIM_IT_Update). + (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter. + [..] + (@) All other functions can be used seperatly to modify, if needed, + a specific feature of the Timer. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the TIMx peripheral registers to their default reset values. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval None + * + */ +void TIM_DeInit(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + if (TIMx == TIM1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); + } + else if (TIMx == TIM2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); + } + else if (TIMx == TIM3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); + } + else if (TIMx == TIM6) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); + } + else if (TIMx == TIM7) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); + } + else if (TIMx == TIM14) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); + } + else if (TIMx == TIM15) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); + } + else if (TIMx == TIM16) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); + } + else + { + if (TIMx == TIM17) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); + } + } + +} + +/** + * @brief Initializes the TIMx Time Base Unit peripheral according to + * the specified parameters in the TIM_TimeBaseInitStruct. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef + * structure that contains the configuration information for + * the specified TIM peripheral. + * @retval None + */ +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); + assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); + + tmpcr1 = TIMx->CR1; + + if((TIMx == TIM1) || (TIMx == TIM2) || (TIMx == TIM3)) + { + /* Select the Counter Mode */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; + } + + if(TIMx != TIM6) + { + /* Set the clock division */ + tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; + } + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; + + /* Set the Prescaler value */ + TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; + + if ((TIMx == TIM1) || (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler and the Repetition counter + values immediately */ + TIMx->EGR = TIM_PSCReloadMode_Immediate; +} + +/** + * @brief Fills each TIM_TimeBaseInitStruct member with its default value. + * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef structure + * which will be initialized. + * @retval None + */ +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + /* Set the default configuration */ + TIM_TimeBaseInitStruct->TIM_Period = 0xFFFFFFFF; + TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; + TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; + TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; +} + +/** + * @brief Configures the TIMx Prescaler. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param Prescaler: specifies the Prescaler Register value + * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode + * This parameter can be one of the following values: + * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. + * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediatly. + * @retval None + */ +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); + + /* Set the Prescaler value */ + TIMx->PSC = Prescaler; + /* Set or reset the UG Bit */ + TIMx->EGR = TIM_PSCReloadMode; +} + +/** + * @brief Specifies the TIMx Counter Mode to be used. + * @param TIMx: where x can be 1, 2, or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_CounterMode: specifies the Counter Mode to be used + * This parameter can be one of the following values: + * @arg TIM_CounterMode_Up: TIM Up Counting Mode + * @arg TIM_CounterMode_Down: TIM Down Counting Mode + * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 + * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 + * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 + * @retval None + */ +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); + + tmpcr1 = TIMx->CR1; + /* Reset the CMS and DIR Bits */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + /* Set the Counter Mode */ + tmpcr1 |= TIM_CounterMode; + /* Write to TIMx CR1 register */ + TIMx->CR1 = tmpcr1; +} + +/** + * @brief Sets the TIMx Counter Register value + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param Counter: specifies the Counter register new value. + * @retval None + */ +void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Set the Counter Register value */ + TIMx->CNT = Counter; +} + +/** + * @brief Sets the TIMx Autoreload Register value + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param Autoreload: specifies the Autoreload register new value. + * @retval None + */ +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Set the Autoreload Register value */ + TIMx->ARR = Autoreload; +} + +/** + * @brief Gets the TIMx Counter value. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval Counter Register value. + */ +uint32_t TIM_GetCounter(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Get the Counter Register value */ + return TIMx->CNT; +} + +/** + * @brief Gets the TIMx Prescaler value. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval Prescaler Register value. + */ +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Get the Prescaler Register value */ + return TIMx->PSC; +} + +/** + * @brief Enables or Disables the TIMx Update event. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param NewState: new state of the TIMx UDIS bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the Update Disable Bit */ + TIMx->CR1 |= TIM_CR1_UDIS; + } + else + { + /* Reset the Update Disable Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS); + } +} + +/** + * @brief Configures the TIMx Update Request Interrupt source. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_UpdateSource: specifies the Update source. + * This parameter can be one of the following values: + * @arg TIM_UpdateSource_Regular: Source of update is the counter + * overflow/underflow or the setting of UG bit, or an update + * generation through the slave mode controller. + * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow. + * @retval None + */ +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); + + if (TIM_UpdateSource != TIM_UpdateSource_Global) + { + /* Set the URS Bit */ + TIMx->CR1 |= TIM_CR1_URS; + } + else + { + /* Reset the URS Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS); + } +} + +/** + * @brief Enables or disables TIMx peripheral Preload register on ARR. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param NewState: new state of the TIMx peripheral Preload register + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the ARR Preload Bit */ + TIMx->CR1 |= TIM_CR1_ARPE; + } + else + { + /* Reset the ARR Preload Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE); + } +} + +/** + * @brief Selects the TIMx's One Pulse Mode. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17 to select the TIM + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OPMode: specifies the OPM Mode to be used. + * This parameter can be one of the following values: + * @arg TIM_OPMode_Single + * @arg TIM_OPMode_Repetitive + * @retval None + */ +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); + + /* Reset the OPM Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM); + /* Configure the OPM Mode */ + TIMx->CR1 |= TIM_OPMode; +} + +/** + * @brief Sets the TIMx Clock Division value. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 and 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_CKD: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CKD_DIV1: TDTS = Tck_tim + * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim + * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim + * @retval None + */ +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_CKD_DIV(TIM_CKD)); + + /* Reset the CKD Bits */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD); + /* Set the CKD value */ + TIMx->CR1 |= TIM_CKD; +} + +/** + * @brief Enables or disables the specified TIM peripheral. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 and 17to select the TIMx + * peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param NewState: new state of the TIMx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TIM Counter */ + TIMx->CR1 |= TIM_CR1_CEN; + } + else + { + /* Disable the TIM Counter */ + TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN)); + } +} + +/** + * @} + */ + +/** @defgroup TIM_Group2 Advanced-control timers (TIM1) specific features + * @brief Advanced-control timers (TIM1) specific features + * +@verbatim + =============================================================================== + ##### Advanced-control timers (TIM1) specific features ##### + =============================================================================== + + =================================================================== + *** TIM Driver: how to use the Break feature *** + =================================================================== + [..] After configuring the Timer channel(s) in the appropriate Output Compare mode: + + (#) Fill the TIM_BDTRInitStruct with the desired parameters for the Timer + Break Polarity, dead time, Lock level, the OSSI/OSSR State and the + AOE(automatic output enable). + + (#) Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer + + (#) Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE) + + (#) Once the break even occurs, the Timer's output signals are put in reset + state or in a known state (according to the configuration made in + TIM_BDTRConfig() function). + +@endverbatim + * @{ + */ +/** + * @brief Configures the: Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param TIMx: where x can be 1, 15, 16 or 17 to select the TIM + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @retval None + */ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); + assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); + assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); + assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); + assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); + /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | + TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | + TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | + TIM_BDTRInitStruct->TIM_AutomaticOutput; +} + +/** + * @brief Fills each TIM_BDTRInitStruct member with its default value. + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which + * will be initialized. + * @retval None + */ +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; + TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; + TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; + TIM_BDTRInitStruct->TIM_DeadTime = 0x00; + TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; + TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; + TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; +} + +/** + * @brief Enables or disables the TIM peripheral Main Outputs. + * @param TIMx: where x can be 1, 15, 16 or 17 to select the TIMx peripheral. + * @param NewState: new state of the TIM peripheral Main Outputs. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TIM Main Output */ + TIMx->BDTR |= TIM_BDTR_MOE; + } + else + { + /* Disable the TIM Main Output */ + TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE)); + } +} + +/** + * @} + */ + +/** @defgroup TIM_Group3 Output Compare management functions + * @brief Output Compare management functions + * +@verbatim + =============================================================================== + ##### Output Compare management functions ##### + =============================================================================== + *** TIM Driver: how to use it in Output Compare Mode *** + =============================================================================== + [..] To use the Timer in Output Compare mode, the following steps are mandatory: + (#) Enable TIM clock using + RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function. + (#) Configure the TIM pins by configuring the corresponding GPIO pins + (#) Configure the Time base unit as described in the first part of this + driver, if needed, else the Timer will run with the default + configuration: + (++) Autoreload value = 0xFFFF. + (++) Prescaler value = 0x0000. + (++) Counter mode = Up counting. + (++) Clock Division = TIM_CKD_DIV1. + (#) Fill the TIM_OCInitStruct with the desired parameters including: + (++) The TIM Output Compare mode: TIM_OCMode. + (++) TIM Output State: TIM_OutputState. + (++) TIM Pulse value: TIM_Pulse. + (++) TIM Output Compare Polarity : TIM_OCPolarity. + (#) Call TIM_OCxInit(TIMx, &TIM_OCInitStruct) to configure the desired + channel with the corresponding configuration. + (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter. + [..] + (@) All other functions can be used separately to modify, if needed, + a specific feature of the Timer. + (@) In case of PWM mode, this function is mandatory: + TIM_OCxPreloadConfig(TIMx, TIM_OCPreload_ENABLE). + (@) If the corresponding interrupt or DMA request are needed, the user should: + (#@) Enable the NVIC (or the DMA) to use the TIM interrupts (or DMA requests). + (#@) Enable the corresponding interrupt (or DMA request) using the function + TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx)). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIMx Channel1 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 and 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM + * peripheral. + * @retval None + */ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E); + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P)); + /* Set the Output Compare Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; + + /* Set the Output State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputState; + + if((TIMx == TIM1) || (TIMx == TIM15) || (TIMx == TIM16) || (TIMx == TIM17)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP)); + /* Set the Output N Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE)); + /* Set the Output N State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputNState; + + /* Reset the Ouput Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N)); + + /* Set the Output Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel2 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM + * peripheral. + * @retval None + */ +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); + + if((TIMx == TIM1) || (TIMx == TIM15)) + { + /* Check the parameters */ + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Ouput Compare State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2)); + + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); + + if (TIMx == TIM1) + { + /* Check the parameters */ + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE)); + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); + + /* Reset the Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N)); + + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); + } + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel3 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM + * peripheral. + * @retval None + */ +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S)); + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); + + if(TIMx == TIM1) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE)); + + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); + /* Reset the Ouput Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel4 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM + * peripheral. + * @retval None + */ +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); + + if(TIMx == TIM1) + { + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + /* Reset the Ouput Compare IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Fills each TIM_OCInitStruct member with its default value. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + /* Set the default configuration */ + TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; + TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStruct->TIM_Pulse = 0x0000000; + TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; +} + +/** + * @brief Selects the TIM Output Compare Mode. + * @note This function disables the selected channel before changing the Output + * Compare Mode. + * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_OCMode: specifies the TIM Output Compare Mode. + * This parameter can be one of the following values: + * @arg TIM_OCMode_Timing + * @arg TIM_OCMode_Active + * @arg TIM_OCMode_Toggle + * @arg TIM_OCMode_PWM1 + * @arg TIM_OCMode_PWM2 + * @arg TIM_ForcedAction_Active + * @arg TIM_ForcedAction_InActive + * @retval None + */ +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) +{ + uint32_t tmp = 0; + uint16_t tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCM(TIM_OCMode)); + + tmp = (uint32_t) TIMx; + tmp += CCMR_OFFSET; + + tmp1 = CCER_CCE_SET << (uint16_t)TIM_Channel; + + /* Disable the Channel: Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t) ~tmp1; + + if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) + { + tmp += (TIM_Channel>>1); + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= TIM_OCMode; + } + else + { + tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); + } +} + +/** + * @brief Sets the TIMx Capture Compare1 Register value + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param Compare1: specifies the Capture Compare1 register new value. + * @retval None + */ +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + + /* Set the Capture Compare1 Register value */ + TIMx->CCR1 = Compare1; +} + +/** + * @brief Sets the TIMx Capture Compare2 Register value + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param Compare2: specifies the Capture Compare2 register new value. + * @retval None + */ +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + + /* Set the Capture Compare2 Register value */ + TIMx->CCR2 = Compare2; +} + +/** + * @brief Sets the TIMx Capture Compare3 Register value + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @param Compare3: specifies the Capture Compare3 register new value. + * @retval None + */ +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Set the Capture Compare3 Register value */ + TIMx->CCR3 = Compare3; +} + +/** + * @brief Sets the TIMx Capture Compare4 Register value + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param Compare4: specifies the Capture Compare4 register new value. + * @retval None + */ +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Set the Capture Compare4 Register value */ + TIMx->CCR4 = Compare4; +} + +/** + * @brief Forces the TIMx output 1 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC1REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. + * @retval None + */ +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M); + /* Configure The Forced output Mode */ + tmpccmr1 |= TIM_ForcedAction; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 2 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC2REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. + * @retval None + */ +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M); + /* Configure The Forced output Mode */ + tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 3 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC3REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. + * @retval None + */ +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC1M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M); + /* Configure The Forced output Mode */ + tmpccmr2 |= TIM_ForcedAction; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Forces the TIMx output 4 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC4REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. + * @retval None + */ +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC2M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M); + /* Configure The Forced output Mode */ + tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIMx peripheral + * @note TIM2 is not applicable for STM32F030 devices. + * @param NewState: new state of the Capture Compare Preload Control bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCPC Bit */ + TIMx->CR2 |= TIM_CR2_CCPC; + } + else + { + /* Reset the CCPC Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC); + } +} + + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR1. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 and 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= TIM_OCPreload; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR2. + * @param TIMx: where x can be 1, 2, 3 and 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR3. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= TIM_OCPreload; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR4. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 1 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= TIM_OCFast; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 2 Fast feature. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 3 Fast feature. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= TIM_OCFast; + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 4 Fast feature. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF1 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= TIM_OCClear; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF2 signal on an external event + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF3 signal on an external event + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= TIM_OCClear; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF4 signal on an external event + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx channel 1 polarity. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPolarity: specifies the OC1 Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC1P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P); + tmpccer |= TIM_OCPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 1N polarity. + * @param TIMx: where x can be 1, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC1N Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC1NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP); + tmpccer |= TIM_OCNPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 2 polarity. + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPolarity: specifies the OC2 Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC2P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 2N polarity. + * @param TIMx: where x can be 1 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC2N Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC2NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 3 polarity. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPolarity: specifies the OC3 Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC3P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 3N polarity. + * @param TIMx: where x can be 1 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC3N Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC3NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 4 polarity. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCPolarity: specifies the OC4 Polarity + * This parmeter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC4P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 12); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Selects the OCReference Clear source. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_OCReferenceClear: specifies the OCReference Clear source. + * This parameter can be one of the following values: + * @arg TIM_OCReferenceClear_ETRF: The internal OCreference clear input is connected to ETRF. + * @arg TIM_OCReferenceClear_OCREFCLR: The internal OCreference clear input is connected to OCREF_CLR input. + * @retval None + */ +void TIM_SelectOCREFClear(TIM_TypeDef* TIMx, uint16_t TIM_OCReferenceClear) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(TIM_OCREFERENCECECLEAR_SOURCE(TIM_OCReferenceClear)); + + /* Set the TIM_OCReferenceClear source */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_OCCS); + TIMx->SMCR |= TIM_OCReferenceClear; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. + * @retval None + */ +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_CCX(TIM_CCx)); + + tmp = CCER_CCE_SET << TIM_Channel; + + /* Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t)~ tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx: where x can be 1, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parmeter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. + * @retval None + */ +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCXN(TIM_CCxN)); + + tmp = CCER_CCNE_SET << TIM_Channel; + + /* Reset the CCxNE Bit */ + TIMx->CCER &= (uint16_t) ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); +} + +/** + * @brief Selects the TIM peripheral Commutation event. + * @param TIMx: where x can be 1, 15, 16 or 17 to select the TIMx peripheral + * @param NewState: new state of the Commutation event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the COM Bit */ + TIMx->CR2 |= TIM_CR2_CCUS; + } + else + { + /* Reset the COM Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS); + } +} + +/** + * @} + */ + +/** @defgroup TIM_Group4 Input Capture management functions + * @brief Input Capture management functions + * +@verbatim + =============================================================================== + ##### Input Capture management functions ##### + =============================================================================== + + *** TIM Driver: how to use it in Input Capture Mode *** + =============================================================================== + [..] To use the Timer in Input Capture mode, the following steps are mandatory: + (#) Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) + function. + (#) Configure the TIM pins by configuring the corresponding GPIO pins. + (#) Configure the Time base unit as described in the first part of this + driver, if needed, else the Timer will run with the default configuration: + (++) Autoreload value = 0xFFFF. + (++) Prescaler value = 0x0000. + (++) Counter mode = Up counting. + (++) Clock Division = TIM_CKD_DIV1. + (#) Fill the TIM_ICInitStruct with the desired parameters including: + (++) TIM Channel: TIM_Channel. + (++) TIM Input Capture polarity: TIM_ICPolarity. + (++) TIM Input Capture selection: TIM_ICSelection. + (++) TIM Input Capture Prescaler: TIM_ICPrescaler. + (++) TIM Input CApture filter value: TIM_ICFilter. + (#) Call TIM_ICInit(TIMx, &TIM_ICInitStruct) to configure the desired + channel with the corresponding configuration and to measure only + frequency or duty cycle of the input signal,or, Call + TIM_PWMIConfig(TIMx, &TIM_ICInitStruct) to configure the desired + channels with the corresponding configuration and to measure the + frequency and the duty cycle of the input signal. + (#) Enable the NVIC or the DMA to read the measured frequency. + (#) Enable the corresponding interrupt (or DMA request) to read + the Captured value, using the function TIM_ITConfig(TIMx, TIM_IT_CCx) + (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx)). + (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter. + (#) Use TIM_GetCapturex(TIMx); to read the captured value. + [..] + (@) All other functions can be used separately to modify, if needed, + a specific feature of the Timer. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM + * peripheral. + * @retval None + */ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); + assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); + + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) + { + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI3 Configuration */ + TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI4 Configuration */ + TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Fills each TIM_ICInitStruct member with its default value. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; + TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; + TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; + TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; + TIM_ICInitStruct->TIM_ICFilter = 0x00; +} + +/** + * @brief Configures the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct to measure an external PWM signal. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM + * peripheral. + * @retval None + */ +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + uint16_t icoppositepolarity = TIM_ICPolarity_Rising; + uint16_t icoppositeselection = TIM_ICSelection_DirectTI; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Select the Opposite Input Polarity */ + if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) + { + icoppositepolarity = TIM_ICPolarity_Falling; + } + else + { + icoppositepolarity = TIM_ICPolarity_Rising; + } + /* Select the Opposite Input */ + if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) + { + icoppositeselection = TIM_ICSelection_IndirectTI; + } + else + { + icoppositeselection = TIM_ICSelection_DirectTI; + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI2 Configuration */ + TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI1 Configuration */ + TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Gets the TIMx Input Capture 1 value. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval Capture Compare 1 Register value. + */ +uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + + /* Get the Capture 1 Register value */ + return TIMx->CCR1; +} + +/** + * @brief Gets the TIMx Input Capture 2 value. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @retval Capture Compare 2 Register value. + */ +uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + + /* Get the Capture 2 Register value */ + return TIMx->CCR2; +} + +/** + * @brief Gets the TIMx Input Capture 3 value. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval Capture Compare 3 Register value. + */ +uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Get the Capture 3 Register value */ + return TIMx->CCR3; +} + +/** + * @brief Gets the TIMx Input Capture 4 value. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval Capture Compare 4 Register value. + */ +uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Get the Capture 4 Register value */ + return TIMx->CCR4; +} + +/** + * @brief Sets the TIMx Input Capture 1 prescaler. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC1PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC); + /* Set the IC1PSC value */ + TIMx->CCMR1 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 2 prescaler. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC2PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC); + /* Set the IC2PSC value */ + TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Input Capture 3 prescaler. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC3PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC); + /* Set the IC3PSC value */ + TIMx->CCMR2 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 4 prescaler. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC4PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC); + /* Set the IC4PSC value */ + TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @} + */ + +/** @defgroup TIM_Group5 Interrupts DMA and flags management functions + * @brief Interrupts, DMA and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts, DMA and flags management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified TIM interrupts. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 or 17 to select the TIMx peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * + * @note TIM6 and TIM7 can only generate an update interrupt. + * @note TIM15 can have only TIM_IT_Update, TIM_IT_CC1,TIM_IT_CC2 or TIM_IT_Trigger. + * @note TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * @note TIM_IT_Break is used only with TIM1 and TIM15. + * @note TIM_IT_COM is used only with TIM1, TIM15, TIM16 and TIM17. + * + * @param NewState: new state of the TIM interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Interrupt sources */ + TIMx->DIER |= TIM_IT; + } + else + { + /* Disable the Interrupt sources */ + TIMx->DIER &= (uint16_t)~TIM_IT; + } +} + +/** + * @brief Configures the TIMx event to be generate by software. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 or 17 to select the + * TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_EventSource: specifies the event source. + * This parameter can be one or more of the following values: + * @arg TIM_EventSource_Update: Timer update Event source + * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EventSource_COM: Timer COM event source + * @arg TIM_EventSource_Trigger: Timer Trigger Event source + * @arg TIM_EventSource_Break: Timer Break event source + * + * @note TIM6 and TIM7 can only generate an update event. + * @note TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1. + * + * @retval None + */ +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); + /* Set the event sources */ + TIMx->EGR = TIM_EventSource; +} + +/** + * @brief Checks whether the specified TIM flag is set or not. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * + * @note TIM6 and TIM7 can have only one update flag. + * @note TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * @note TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * @note TIM_FLAG_Break is used only with TIM1 and TIM15. + * @note TIM_FLAG_COM is used only with TIM1 TIM15, TIM16 and TIM17. + * + * @retval The new state of TIM_FLAG (SET or RESET). + */ +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); + + if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's pending flags. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_FLAG: specifies the flag bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * + * @note TIM6 and TIM7 can have only one update flag. + * @note TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,TIM_FLAG_CC2 or + * TIM_FLAG_Trigger. + * @note TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * @note TIM_FLAG_Break is used only with TIM1 and TIM15. + * @note TIM_FLAG_COM is used only with TIM1, TIM15, TIM16 and TIM17. + * + * @retval None + */ +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG)); + + /* Clear the flags */ + TIMx->SR = (uint16_t)~TIM_FLAG; +} + +/** + * @brief Checks whether the TIM interrupt has occurred or not. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_IT: specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * + * @note TIM6 and TIM7 can generate only an update interrupt. + * @note TIM15 can have only TIM_IT_Update, TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger. + * @note TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * @note TIM_IT_Break is used only with TIM1 and TIM15. + * @note TIM_IT_COM is used only with TIM1, TIM15, TIM16 and TIM17. + * + * @retval The new state of the TIM_IT(SET or RESET). + */ +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itstatus = 0x0, itenable = 0x0; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_IT(TIM_IT)); + + itstatus = TIMx->SR & TIM_IT; + + itenable = TIMx->DIER & TIM_IT; + if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's interrupt pending bits. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_IT: specifies the pending bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM1 update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * + * @note TIM6 and TIM7 can generate only an update interrupt. + * @note TIM15 can have only TIM_IT_Update, TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger. + * @note TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * @note TIM_IT_Break is used only with TIM1 and TIM15. + * @note TIM_IT_COM is used only with TIM1, TIM15, TIM16 and TIM17. + * + * @retval None + */ +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + + /* Clear the IT pending Bit */ + TIMx->SR = (uint16_t)~TIM_IT; +} + +/** + * @brief Configures the TIMx's DMA interface. + * @param TIMx: where x can be 1, 2, 3, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_DMABase: DMA Base address. + * This parameter can be one of the following values: + * @arg TIM_DMABase_CR1 + * @arg TIM_DMABase_CR2 + * @arg TIM_DMABase_SMCR + * @arg TIM_DMABase_DIER + * @arg TIM_DMABase_SR + * @arg TIM_DMABase_EGR + * @arg TIM_DMABase_CCMR1 + * @arg TIM_DMABase_CCMR2 + * @arg TIM_DMABase_CCER + * @arg TIM_DMABase_CNT + * @arg TIM_DMABase_PSC + * @arg TIM_DMABase_ARR + * @arg TIM_DMABase_CCR1 + * @arg TIM_DMABase_CCR2 + * @arg TIM_DMABase_CCR3 + * @arg TIM_DMABase_CCR4 + * @arg TIM_DMABase_DCR + * @arg TIM_DMABase_OR + * @param TIM_DMABurstLength: DMA Burst length. This parameter can be one value + * between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. + * @retval None + */ +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); + assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); + /* Set the DMA Base and the DMA Burst Length */ + TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; +} + +/** + * @brief Enables or disables the TIMx's DMA Requests. + * @param TIMx: where x can be 1, 2, 3, 6, 7, 15, 16 or 17 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_DMASource: specifies the DMA Request sources. + * This parameter can be any combination of the following values: + * @arg TIM_DMA_Update: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_Trigger: TIM Trigger DMA source + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST10_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA sources */ + TIMx->DIER |= TIM_DMASource; + } + else + { + /* Disable the DMA sources */ + TIMx->DIER &= (uint16_t)~TIM_DMASource; + } +} + +/** + * @brief Selects the TIMx peripheral Capture Compare DMA source. + * @param TIMx: where x can be 1, 2, 3, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param NewState: new state of the Capture Compare DMA source + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the CCDS Bit */ + TIMx->CR2 |= TIM_CR2_CCDS; + } + else + { + /* Reset the CCDS Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS); + } +} + +/** + * @} + */ + +/** @defgroup TIM_Group6 Clocks management functions + * @brief Clocks management functions + * +@verbatim + =============================================================================== + ##### Clocks management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the TIMx internal Clock + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @retval None + */ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Disable slave mode to clock the prescaler directly with the internal clock */ + TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); +} + +/** + * @brief Configures the TIMx Internal Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ITRSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @retval None + */ +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Select the Internal Trigger */ + TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the TIMx Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_TIxExternalCLKSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector + * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 + * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 + * @param TIM_ICPolarity: specifies the TIx Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param ICFilter: specifies the filter value. + * This parameter must be a value between 0x0 and 0xF. + * @retval None + */ +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); + assert_param(IS_TIM_IC_FILTER(ICFilter)); + + /* Configure the Timer Input Clock Source */ + if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) + { + TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + else + { + TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + /* Select the Trigger source */ + TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the External clock Mode1 + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the SMS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + /* Select the External clock mode1 */ + tmpsmcr |= TIM_SlaveMode_External1; + /* Select the Trigger selection : ETRF */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + tmpsmcr |= TIM_TS_ETRF; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the External clock Mode2 + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + /* Enable the External clock mode2 */ + TIMx->SMCR |= TIM_SMCR_ECE; +} + +/** + * @} + */ + +/** @defgroup TIM_Group7 Synchronization management functions + * @brief Synchronization management functions + * +@verbatim + =============================================================================== + ##### Synchronization management functions ##### + =============================================================================== + *** TIM Driver: how to use it in synchronization Mode *** + =============================================================================== + [..] Case of two/several Timers + (#) Configure the Master Timers using the following functions: + (++) void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, + uint16_t TIM_TRGOSource). + (++) void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, + uint16_t TIM_MasterSlaveMode); + (#) Configure the Slave Timers using the following functions: + (++) void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, + uint16_t TIM_InputTriggerSource); + (++) void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); + [..] Case of Timers and external trigger(ETR pin) + (#) Configure the Etrenal trigger using this function: + (++) void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); + (#) Configure the Slave Timers using the following functions: + (++) void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, + uint16_t TIM_InputTriggerSource); + (++) void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); + +@endverbatim + * @{ + */ +/** + * @brief Selects the Input Trigger source + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_InputTriggerSource: The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + uint16_t tmpsmcr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + /* Set the Input Trigger source */ + tmpsmcr |= TIM_InputTriggerSource; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Selects the TIMx Trigger Output Mode. + * @param TIMx: where x can be 1, 2, 3, 6, 7, or 15 to select the TIM peripheral. + * @note TIM7 is applicable only for STM32F072 devices + * @note TIM6 is not applivable for STM32F031 devices. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_TRGOSource: specifies the Trigger Output source. + * This parameter can be one of the following values: + * + * - For all TIMx + * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO). + * + * - For all TIMx except TIM6 and TIM7 + * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag + * is to be set, as soon as a capture or compare match occurs (TRGO). + * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO). + * + * @retval None + */ +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST9_PERIPH(TIMx)); + assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); + + /* Reset the MMS Bits */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS); + /* Select the TRGO source */ + TIMx->CR2 |= TIM_TRGOSource; +} + +/** + * @brief Selects the TIMx Slave Mode. + * @param TIMx: where x can be 1, 2, 3 or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_SlaveMode: specifies the Timer Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes + * the counter and triggers an update of the registers. + * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high. + * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI. + * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter. + * @retval None + */ +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); + + /* Reset the SMS Bits */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS); + /* Select the Slave Mode */ + TIMx->SMCR |= TIM_SlaveMode; +} + +/** + * @brief Sets or Resets the TIMx Master/Slave Mode. + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer + * and its slaves (through TRGO). + * @arg TIM_MasterSlaveMode_Disable: No action + * @retval None + */ +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); + + /* Reset the MSM Bit */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM); + + /* Set or Reset the MSM Bit */ + TIMx->SMCR |= TIM_MasterSlaveMode; +} + +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + + tmpsmcr = TIMx->SMCR; + /* Reset the ETR Bits */ + tmpsmcr &= SMCR_ETR_MASK; + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @} + */ + +/** @defgroup TIM_Group8 Specific interface management functions + * @brief Specific interface management functions + * +@verbatim + =============================================================================== + ##### Specific interface management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the TIMx Encoder Interface. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. + * This parameter can be one of the following values: + * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. + * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. + * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending + * on the level of the other input. + * @param TIM_IC1Polarity: specifies the IC1 Polarity + * This parmeter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @param TIM_IC2Polarity: specifies the IC2 Polarity + * This parmeter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @retval None + */ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) +{ + uint16_t tmpsmcr = 0; + uint16_t tmpccmr1 = 0; + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Set the encoder Mode */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + tmpsmcr |= TIM_EncoderMode; + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S))); + tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP)) & (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP)); + tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Enables or disables the TIMx's Hall sensor interface. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param NewState: new state of the TIMx Hall sensor interface. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the TI1S Bit */ + TIMx->CR2 |= TIM_CR2_TI1S; + } + else + { + /* Reset the TI1S Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S); + } +} + +/** + * @} + */ + +/** @defgroup TIM_Group9 Specific remapping management function + * @brief Specific remapping management function + * +@verbatim + =============================================================================== + ##### Specific remapping management function ##### + =============================================================================== + +@endverbatim + * @{ + */ +/** + * @brief Configures the TIM14 Remapping input Capabilities. + * @param TIMx: where x can be 14 to select the TIM peripheral. + * @param TIM_Remap: specifies the TIM input reampping source. + * This parameter can be one of the following values: + * @arg TIM14_GPIO: TIM14 Channel 1 is connected to GPIO. + * @arg TIM14_RTC_CLK: TIM14 Channel 1 is connected to RTC input clock. + * RTC input clock can be LSE, LSI or HSE/div128. + * @arg TIM14_HSE_DIV32: TIM14 Channel 1 is connected to HSE/32 clock. + * @arg TIM14_MCO: TIM14 Channel 1 is connected to MCO clock. + * MCO clock can be HSI14, SYSCLK, HSI, HSE or PLL/2. + * @retval None + */ +void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST11_PERIPH(TIMx)); + assert_param(IS_TIM_REMAP(TIM_Remap)); + + /* Set the Timer remapping configuration */ + TIMx->OR = TIM_Remap; +} + +/** + * @} + */ + +/** + * @brief Configure the TI1 as Input. + * @param TIMx: where x can be 1, 2, 3, 14, 15, 16 or 17 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPolarity: The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0; + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F))); + tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx: where x can be 1, 2, 3, or 15 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPolarity: The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 4); + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F))); + tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); + tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPolarity: The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 8); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx: where x can be 1, 2 or 3 to select the TIM peripheral. + * @note TIM2 is not applicable for STM32F030 devices. + * @param TIM_ICPolarity: The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 12); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); + tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P | TIM_CCER_CC4NP)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_usart.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_usart.c new file mode 100644 index 0000000..2ce019e --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_usart.c @@ -0,0 +1,2160 @@ +/** + ****************************************************************************** + * @file stm32f0xx_usart.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Universal synchronous asynchronous receiver + * transmitter (USART): + * + Initialization and Configuration + * + STOP Mode + * + AutoBaudRate + * + Data transfers + * + Multi-Processor Communication + * + LIN mode + * + Half-duplex mode + * + Smartcard mode + * + IrDA mode + * + RS485 mode + * + DMA transfers management + * + Interrupts and flags management + * + * @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (#) Enable peripheral clock using RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE) + function for USART1 or using RCC_APB1PeriphClockCmd(RCC_APB1Periph_USARTx, ENABLE) + function for USART2 and USART3. + (#) According to the USART mode, enable the GPIO clocks using + RCC_AHBPeriphClockCmd() function. (The I/O can be TX, RX, CTS, + or and SCLK). + (#) Peripheral's alternate function: + (++) Connect the pin to the desired peripherals' Alternate + Function (AF) using GPIO_PinAFConfig() function. + (++) Configure the desired pin in alternate function by: + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF. + (++) Select the type, pull-up/pull-down and output speed via + GPIO_PuPd, GPIO_OType and GPIO_Speed members. + (++) Call GPIO_Init() function. + (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware + flow control and Mode(Receiver/Transmitter) using the SPI_Init() + function. + (#) For synchronous mode, enable the clock and program the polarity, + phase and last bit using the USART_ClockInit() function. + (#) Enable the NVIC and the corresponding interrupt using the function + USART_ITConfig() if you need to use interrupt mode. + (#) When using the DMA mode: + (++) Configure the DMA using DMA_Init() function. + (++) Active the needed channel Request using USART_DMACmd() function. + (#) Enable the USART using the USART_Cmd() function. + (#) Enable the DMA using the DMA_Cmd() function, when using DMA mode. + [..] + Refer to Multi-Processor, LIN, half-duplex, Smartcard, IrDA sub-sections + for more details. + +@endverbatim + + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_usart.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/*!< USART CR1 register clear Mask ((~(uint32_t)0xFFFFE6F3)) */ +#define CR1_CLEAR_MASK ((uint32_t)(USART_CR1_M | USART_CR1_PCE | \ + USART_CR1_PS | USART_CR1_TE | \ + USART_CR1_RE)) + +/*!< USART CR2 register clock bits clear Mask ((~(uint32_t)0xFFFFF0FF)) */ +#define CR2_CLOCK_CLEAR_MASK ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ + USART_CR2_CPHA | USART_CR2_LBCL)) + +/*!< USART CR3 register clear Mask ((~(uint32_t)0xFFFFFCFF)) */ +#define CR3_CLEAR_MASK ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) + +/*!< USART Interrupts mask */ +#define IT_MASK ((uint32_t)0x000000FF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup USART_Private_Functions + * @{ + */ + +/** @defgroup USART_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate. + (++) Word Length. + (++) Stop Bit. + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + the possible USART frame formats are as listed in the following table: + + +-------------------------------------------------------------+ + | M bit | PCE bit | USART frame | + |---------------------|---------------------------------------| + | 0 | 0 | | SB | 8 bit data | STB | | + |---------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9 bit data | STB | | + |---------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ + + (++) Hardware flow control. + (++) Receiver/transmitter modes. + [..] The USART_Init() function follows the USART asynchronous configuration + procedure(details for the procedure are available in reference manual. + (+) For the synchronous mode in addition to the asynchronous mode parameters + these parameters should be also configured: + (++) USART Clock Enabled. + (++) USART polarity. + (++) USART phase. + (++) USART LastBit. + [..] These parameters can be configured using the USART_ClockInit() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the USARTx peripheral registers to their default reset values. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @retval None + */ +void USART_DeInit(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + if (USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if (USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if (USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if (USARTx == USART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART4, DISABLE); + } + else if (USARTx == USART5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART5, DISABLE); + } + else if (USARTx == USART6) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, DISABLE); + } + else if (USARTx == USART7) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART7, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART7, DISABLE); + } + else + { + if (USARTx == USART8) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART8, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART8, DISABLE); + } + } +} + +/** + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct . + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that contains + * the configuration information for the specified USART peripheral. + * @retval None + */ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) +{ + uint32_t divider = 0, apbclock = 0, tmpreg = 0; + RCC_ClocksTypeDef RCC_ClocksStatus; + + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); + assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); + assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); + assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); + assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); + assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); + + /* Disable USART */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_UE); + + /*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear STOP[13:12] bits */ + tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP); + + /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ + /* Set STOP[13:12] bits according to USART_StopBits value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + /* Write to USART CR2 */ + USARTx->CR2 = tmpreg; + + /*---------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = USARTx->CR1; + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)CR1_CLEAR_MASK); + + /* Configure the USART Word Length, Parity and mode ----------------------- */ + /* Set the M bits according to USART_WordLength value */ + /* Set PCE and PS bits according to USART_Parity value */ + /* Set TE and RE bits according to USART_Mode value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + + /* Write to USART CR1 */ + USARTx->CR1 = tmpreg; + + /*---------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = USARTx->CR3; + /* Clear CTSE and RTSE bits */ + tmpreg &= (uint32_t)~((uint32_t)CR3_CLEAR_MASK); + + /* Configure the USART HFC -------------------------------------------------*/ + /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + + /* Write to USART CR3 */ + USARTx->CR3 = tmpreg; + + /*---------------------------- USART BRR Configuration -----------------------*/ + /* Configure the USART Baud Rate -------------------------------------------*/ + RCC_GetClocksFreq(&RCC_ClocksStatus); + + if (USARTx == USART1) + { + apbclock = RCC_ClocksStatus.USART1CLK_Frequency; + } + else if (USARTx == USART2) + { + apbclock = RCC_ClocksStatus.USART2CLK_Frequency; + } + else if (USARTx == USART3) + { + apbclock = RCC_ClocksStatus.USART3CLK_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK_Frequency; + } + + /* Determine the integer part */ + if ((USARTx->CR1 & USART_CR1_OVER8) != 0) + { + /* (divider * 10) computing in case Oversampling mode is 8 Samples */ + divider = (uint32_t)((2 * apbclock) / (USART_InitStruct->USART_BaudRate)); + tmpreg = (uint32_t)((2 * apbclock) % (USART_InitStruct->USART_BaudRate)); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + /* (divider * 10) computing in case Oversampling mode is 16 Samples */ + divider = (uint32_t)((apbclock) / (USART_InitStruct->USART_BaudRate)); + tmpreg = (uint32_t)((apbclock) % (USART_InitStruct->USART_BaudRate)); + } + + /* round the divider : if fractional part i greater than 0.5 increment divider */ + if (tmpreg >= (USART_InitStruct->USART_BaudRate) / 2) + { + divider++; + } + + /* Implement the divider in case Oversampling mode is 8 Samples */ + if ((USARTx->CR1 & USART_CR1_OVER8) != 0) + { + /* get the LSB of divider and shift it to the right by 1 bit */ + tmpreg = (divider & (uint16_t)0x000F) >> 1; + + /* update the divider value */ + divider = (divider & (uint16_t)0xFFF0) | tmpreg; + } + + /* Write to USART BRR */ + USARTx->BRR = (uint16_t)divider; +} + +/** + * @brief Fills each USART_InitStruct member with its default value. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * which will be initialized. + * @retval None + */ +void USART_StructInit(USART_InitTypeDef* USART_InitStruct) +{ + /* USART_InitStruct members default value */ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No ; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/** + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure that contains the configuration information for the specified + * USART peripheral. + * @retval None + */ +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); + assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); + assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); + assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear CLKEN, CPOL, CPHA, LBCL and SSM bits */ + tmpreg &= (uint32_t)~((uint32_t)CR2_CLOCK_CLEAR_MASK); + /* Configure the USART Clock, CPOL, CPHA, LastBit and SSM ------------*/ + /* Set CLKEN bit according to USART_Clock value */ + /* Set CPOL bit according to USART_CPOL value */ + /* Set CPHA bit according to USART_CPHA value */ + /* Set LBCL bit according to USART_LastBit value */ + tmpreg |= (uint32_t)(USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit); + /* Write to USART CR2 */ + USARTx->CR2 = tmpreg; +} + +/** + * @brief Fills each USART_ClockInitStruct member with its default value. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure which will be initialized. + * @retval None + */ +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + /* USART_ClockInitStruct members default value */ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/** + * @brief Enables or disables the specified USART peripheral. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USARTx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART by setting the UE bit in the CR1 register */ + USARTx->CR1 |= USART_CR1_UE; + } + else + { + /* Disable the selected USART by clearing the UE bit in the CR1 register */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_UE); + } +} + +/** + * @brief Enables or disables the USART's transmitter or receiver. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_Direction: specifies the USART direction. + * This parameter can be any combination of the following values: + * @arg USART_Mode_Tx: USART Transmitter + * @arg USART_Mode_Rx: USART Receiver + * @param NewState: new state of the USART transfer direction. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_DirectionModeCmd(USART_TypeDef* USARTx, uint32_t USART_DirectionMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_MODE(USART_DirectionMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART's transfer interface by setting the TE and/or RE bits + in the USART CR1 register */ + USARTx->CR1 |= USART_DirectionMode; + } + else + { + /* Disable the USART's transfer interface by clearing the TE and/or RE bits + in the USART CR3 register */ + USARTx->CR1 &= (uint32_t)~USART_DirectionMode; + } +} + +/** + * @brief Enables or disables the USART's 8x oversampling mode. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USART 8x oversampling mode. + * This parameter can be: ENABLE or DISABLE. + * @note This function has to be called before calling USART_Init() function + * in order to have correct baudrate Divider value. + * @retval None + */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ + USARTx->CR1 |= USART_CR1_OVER8; + } + else + { + /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_OVER8); + } +} + +/** + * @brief Enables or disables the USART's one bit sampling method. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_ONEBIT; + } + else + { + /* Disable the one bit method by clearing the ONEBITE bit in the CR3 register */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT); + } +} + +/** + * @brief Enables or disables the USART's most significant bit first + * transmitted/received following the start bit. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USART most significant bit first + * transmitted/received following the start bit. + * This parameter can be: ENABLE or DISABLE. + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_MSBFirstCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the most significant bit first transmitted/received following the + start bit by setting the MSBFIRST bit in the CR2 register */ + USARTx->CR2 |= USART_CR2_MSBFIRST; + } + else + { + /* Disable the most significant bit first transmitted/received following the + start bit by clearing the MSBFIRST bit in the CR2 register */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_MSBFIRST); + } +} + +/** + * @brief Enables or disables the binary data inversion. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new defined levels for the USART data. + * This parameter can be: + * @arg ENABLE: Logical data from the data register are send/received in negative + * logic (1=L, 0=H). The parity bit is also inverted. + * @arg DISABLE: Logical data from the data register are send/received in positive + * logic (1=H, 0=L) + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_DataInvCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the binary data inversion feature by setting the DATAINV bit in + the CR2 register */ + USARTx->CR2 |= USART_CR2_DATAINV; + } + else + { + /* Disable the binary data inversion feature by clearing the DATAINV bit in + the CR2 register */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_DATAINV); + } +} + +/** + * @brief Enables or disables the Pin(s) active level inversion. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_InvPin: specifies the USART pin(s) to invert. + * This parameter can be any combination of the following values: + * @arg USART_InvPin_Tx: USART Tx pin active level inversion. + * @arg USART_InvPin_Rx: USART Rx pin active level inversion. + * @param NewState: new active level status for the USART pin(s). + * This parameter can be: + * @arg ENABLE: pin(s) signal values are inverted (Vdd =0, Gnd =1). + * @arg DISABLE: pin(s) signal works using the standard logic levels (Vdd =1, Gnd =0). + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_InvPinCmd(USART_TypeDef* USARTx, uint32_t USART_InvPin, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_INVERSTION_PIN(USART_InvPin)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the active level inversion for selected pins by setting the TXINV + and/or RXINV bits in the USART CR2 register */ + USARTx->CR2 |= USART_InvPin; + } + else + { + /* Disable the active level inversion for selected requests by clearing the + TXINV and/or RXINV bits in the USART CR2 register */ + USARTx->CR2 &= (uint32_t)~USART_InvPin; + } +} + +/** + * @brief Enables or disables the swap Tx/Rx pins. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USARTx TX/RX pins pinout. + * This parameter can be: + * @arg ENABLE: The TX and RX pins functions are swapped. + * @arg DISABLE: TX/RX pins are used as defined in standard pinout + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_SWAPPinCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the SWAP feature by setting the SWAP bit in the CR2 register */ + USARTx->CR2 |= USART_CR2_SWAP; + } + else + { + /* Disable the SWAP feature by clearing the SWAP bit in the CR2 register */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_SWAP); + } +} + +/** + * @brief Enables or disables the receiver Time Out feature. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the USARTx receiver Time Out. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ReceiverTimeOutCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the receiver time out feature by setting the RTOEN bit in the CR2 + register */ + USARTx->CR2 |= USART_CR2_RTOEN; + } + else + { + /* Disable the receiver time out feature by clearing the RTOEN bit in the CR2 + register */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_RTOEN); + } +} + +/** + * @brief Sets the receiver Time Out value. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_ReceiverTimeOut: specifies the Receiver Time Out value. + * @retval None + */ +void USART_SetReceiverTimeOut(USART_TypeDef* USARTx, uint32_t USART_ReceiverTimeOut) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_TIMEOUT(USART_ReceiverTimeOut)); + + /* Clear the receiver Time Out value by clearing the RTO[23:0] bits in the RTOR + register */ + USARTx->RTOR &= (uint32_t)~((uint32_t)USART_RTOR_RTO); + /* Set the receiver Time Out value by setting the RTO[23:0] bits in the RTOR + register */ + USARTx->RTOR |= USART_ReceiverTimeOut; +} + +/** + * @brief Sets the system clock prescaler. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_Prescaler: specifies the prescaler clock. + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the USART prescaler */ + USARTx->GTPR &= USART_GTPR_GT; + /* Set the USART prescaler */ + USARTx->GTPR |= USART_Prescaler; +} + +/** + * @} + */ + + +/** @defgroup USART_Group2 STOP Mode functions + * @brief STOP Mode functions + * +@verbatim + =============================================================================== + ##### STOP Mode functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage + WakeUp from STOP mode. + + [..] The USART is able to WakeUp from Stop Mode if USART clock is set to HSI + or LSI. + + [..] The WakeUp source is configured by calling USART_StopModeWakeUpSourceConfig() + function. + + [..] After configuring the source of WakeUp and before entering in Stop Mode + USART_STOPModeCmd() function should be called to allow USART WakeUp. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified USART peripheral in STOP Mode. + * @param USARTx: where x can be 1 or 2 or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the USARTx peripheral state in stop mode. + * This parameter can be: ENABLE or DISABLE. + * @note This function has to be called when USART clock is set to HSI or LSE. + * @retval None + */ +void USART_STOPModeCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART in STOP mode by setting the UESM bit in the CR1 + register */ + USARTx->CR1 |= USART_CR1_UESM; + } + else + { + /* Disable the selected USART in STOP mode by clearing the UE bit in the CR1 + register */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_UESM); + } +} + +/** + * @brief Selects the USART WakeUp method form stop mode. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1 or 2 or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_WakeUp: specifies the selected USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUpSource_AddressMatch: WUF active on address match. + * @arg USART_WakeUpSource_StartBit: WUF active on Start bit detection. + * @arg USART_WakeUpSource_RXNE: WUF active on RXNE. + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_StopModeWakeUpSourceConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUpSource) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_STOPMODE_WAKEUPSOURCE(USART_WakeUpSource)); + + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_WUS); + USARTx->CR3 |= USART_WakeUpSource; +} + +/** + * @} + */ + + +/** @defgroup USART_Group3 AutoBaudRate functions + * @brief AutoBaudRate functions + * +@verbatim + =============================================================================== + ##### AutoBaudRate functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage + the AutoBaudRate detections. + + [..] Before Enabling AutoBaudRate detection using USART_AutoBaudRateCmd () + The character patterns used to calculate baudrate must be chosen by calling + USART_AutoBaudRateConfig() function. These function take as parameter : + (#)USART_AutoBaudRate_StartBit : any character starting with a bit 1. + (#)USART_AutoBaudRate_FallingEdge : any character starting with a 10xx bit pattern. + + [..] At any later time, another request for AutoBaudRate detection can be performed + using USART_RequestCmd() function. + + [..] The AutoBaudRate detection is monitored by the status of ABRF flag which indicate + that the AutoBaudRate detection is completed. In addition to ABRF flag, the ABRE flag + indicate that this procedure is completed without success. USART_GetFlagStatus () + function should be used to monitor the status of these flags. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the Auto Baud Rate. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the USARTx auto baud rate. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_AutoBaudRateCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the auto baud rate feature by setting the ABREN bit in the CR2 + register */ + USARTx->CR2 |= USART_CR2_ABREN; + } + else + { + /* Disable the auto baud rate feature by clearing the ABREN bit in the CR2 + register */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_ABREN); + } +} + +/** + * @brief Selects the USART auto baud rate method. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_AutoBaudRate: specifies the selected USART auto baud rate method. + * This parameter can be one of the following values: + * @arg USART_AutoBaudRate_StartBit: Start Bit duration measurement. + * @arg USART_AutoBaudRate_FallingEdge: Falling edge to falling edge measurement. + * @note This function has to be called before calling USART_Cmd() function. + * @retval None + */ +void USART_AutoBaudRateConfig(USART_TypeDef* USARTx, uint32_t USART_AutoBaudRate) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_AUTOBAUDRATE_MODE(USART_AutoBaudRate)); + + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_ABRMODE); + USARTx->CR2 |= USART_AutoBaudRate; +} + +/** + * @} + */ + + +/** @defgroup USART_Group4 Data transfers functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### Data transfers functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage + the USART data transfers. + [..] During an USART reception, data shifts in least significant bit first + through the RX pin. When a transmission is taking place, a write instruction to + the USART_TDR register stores the data in the shift register. + [..] The read access of the USART_RDR register can be done using + the USART_ReceiveData() function and returns the RDR value. + Whereas a write access to the USART_TDR can be done using USART_SendData() + function and stores the written data into TDR. + +@endverbatim + * @{ + */ + +/** + * @brief Transmits single data through the USARTx peripheral. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param Data: the data to transmit. + * @retval None + */ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DATA(Data)); + + /* Transmit Data */ + USARTx->TDR = (Data & (uint16_t)0x01FF); +} + +/** + * @brief Returns the most recent received data by the USARTx peripheral. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @retval The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Receive Data */ + return (uint16_t)(USARTx->RDR & (uint16_t)0x01FF); +} + +/** + * @} + */ + +/** @defgroup USART_Group5 MultiProcessor Communication functions + * @brief Multi-Processor Communication functions + * +@verbatim + =============================================================================== + ##### Multi-Processor Communication functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART + multiprocessor communication. + [..] For instance one of the USARTs can be the master, its TX output is + connected to the RX input of the other USART. The others are slaves, + their respective TX outputs are logically ANDed together and connected + to the RX input of the master. USART multiprocessor communication is + possible through the following procedure: + (#) Program the Baud rate, Word length = 9 bits, Stop bits, Parity, + Mode transmitter or Mode receiver and hardware flow control values + using the USART_Init() function. + (#) Configures the USART address using the USART_SetAddress() function. + (#) Configures the wake up methode (USART_WakeUp_IdleLine or + USART_WakeUp_AddressMark) using USART_WakeUpConfig() function only + for the slaves. + (#) Enable the USART using the USART_Cmd() function. + (#) Enter the USART slaves in mute mode using USART_ReceiverWakeUpCmd() + function. + [..] The USART Slave exit from mute mode when receive the wake up condition. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the address of the USART node. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_Address: Indicates the address of the USART node. + * @retval None + */ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Clear the USART address */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_ADD); + /* Set the USART address node */ + USARTx->CR2 |=((uint32_t)USART_Address << (uint32_t)0x18); +} + +/** + * @brief Enables or disables the USART's mute mode. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USART mute mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_MuteModeCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART mute mode by setting the MME bit in the CR1 register */ + USARTx->CR1 |= USART_CR1_MME; + } + else + { + /* Disable the USART mute mode by clearing the MME bit in the CR1 register */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_MME); + } +} + +/** + * @brief Selects the USART WakeUp method from mute mode. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_WakeUp: specifies the USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection + * @arg USART_WakeUp_AddressMark: WakeUp by an address mark + * @retval None + */ +void USART_MuteModeWakeUpConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUp) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_MUTEMODE_WAKEUP(USART_WakeUp)); + + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_WAKE); + USARTx->CR1 |= USART_WakeUp; +} + +/** + * @brief Configure the the USART Address detection length. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_AddressLength: specifies the USART address length detection. + * This parameter can be one of the following values: + * @arg USART_AddressLength_4b: 4-bit address length detection + * @arg USART_AddressLength_7b: 7-bit address length detection + * @retval None + */ +void USART_AddressDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_AddressLength) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_ADDRESS_DETECTION(USART_AddressLength)); + + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_ADDM7); + USARTx->CR2 |= USART_AddressLength; +} + +/** + * @} + */ + +/** @defgroup USART_Group6 LIN mode functions + * @brief LIN mode functions + * +@verbatim + =============================================================================== + ##### LIN mode functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART + LIN Mode communication. + [..] In LIN mode, 8-bit data format with 1 stop bit is required in accordance + with the LIN standard. + [..] Only this LIN Feature is supported by the USART IP: + (+) LIN Master Synchronous Break send capability and LIN slave break + detection capability : 13-bit break generation and 10/11 bit break + detection. + [..] USART LIN Master transmitter communication is possible through the + following procedure: + (#) Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, + Mode transmitter or Mode receiver and hardware flow control values + using the USART_Init() function. + (#) Enable the LIN mode using the USART_LINCmd() function. + (#) Enable the USART using the USART_Cmd() function. + (#) Send the break character using USART_SendBreak() function. + [..] USART LIN Master receiver communication is possible through the + following procedure: + (#) Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, + Mode transmitter or Mode receiver and hardware flow control values + using the USART_Init() function. + (#) Configures the break detection length + using the USART_LINBreakDetectLengthConfig() function. + (#) Enable the LIN mode using the USART_LINCmd() function. + -@- In LIN mode, the following bits must be kept cleared: + (+@) CLKEN in the USART_CR2 register. + (+@) STOP[1:0], SCEN, HDSEL and IREN in the USART_CR3 register. + (#) Enable the USART using the USART_Cmd() function. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the USART LIN Break detection length. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_LINBreakDetectLength: specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg USART_LINBreakDetectLength_10b: 10-bit break detection + * @arg USART_LINBreakDetectLength_11b: 11-bit break detection + * @retval None + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint32_t USART_LINBreakDetectLength) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); + + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_LBDL); + USARTx->CR2 |= USART_LINBreakDetectLength; +} + +/** + * @brief Enables or disables the USART's LIN mode. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the USART LIN mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + USARTx->CR2 |= USART_CR2_LINEN; + } + else + { + /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ + USARTx->CR2 &= (uint32_t)~((uint32_t)USART_CR2_LINEN); + } +} + +/** + * @} + */ + +/** @defgroup USART_Group7 Halfduplex mode function + * @brief Half-duplex mode function + * +@verbatim + =============================================================================== + ##### Half-duplex mode function ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART + Half-duplex communication. + [..] The USART can be configured to follow a single-wire half-duplex protocol + where the TX and RX lines are internally connected. + [..] USART Half duplex communication is possible through the following procedure: + (#) Program the Baud rate, Word length, Stop bits, Parity, Mode transmitter + or Mode receiver and hardware flow control values using the USART_Init() + function. + (#) Configures the USART address using the USART_SetAddress() function. + (#) Enable the half duplex mode using USART_HalfDuplexCmd() function. + (#) Enable the USART using the USART_Cmd() function. + -@- The RX pin is no longer used. + -@- In Half-duplex mode the following bits must be kept cleared: + (+@) LINEN and CLKEN bits in the USART_CR2 register. + (+@) SCEN and IREN bits in the USART_CR3 register. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the USART's Half Duplex communication. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the USART Communication. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_HDSEL; + } + else + { + /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_HDSEL); + } +} + +/** + * @} + */ + + +/** @defgroup USART_Group8 Smartcard mode functions + * @brief Smartcard mode functions + * +@verbatim + =============================================================================== + ##### Smartcard mode functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART + Smartcard communication. + [..] The Smartcard interface is designed to support asynchronous protocol + Smartcards as defined in the ISO 7816-3 standard. The USART can provide + a clock to the smartcard through the SCLK output. In smartcard mode, + SCLK is not associated to the communication but is simply derived from + the internal peripheral input clock through a 5-bit prescaler. + [..] Smartcard communication is possible through the following procedure: + (#) Configures the Smartcard Prsecaler using the USART_SetPrescaler() + function. + (#) Configures the Smartcard Guard Time using the USART_SetGuardTime() + function. + (#) Program the USART clock using the USART_ClockInit() function as following: + (++) USART Clock enabled. + (++) USART CPOL Low. + (++) USART CPHA on first edge. + (++) USART Last Bit Clock Enabled. + (#) Program the Smartcard interface using the USART_Init() function as + following: + (++) Word Length = 9 Bits. + (++) 1.5 Stop Bit. + (++) Even parity. + (++) BaudRate = 12096 baud. + (++) Hardware flow control disabled (RTS and CTS signals). + (++) Tx and Rx enabled + (#) Optionally you can enable the parity error interrupt using + the USART_ITConfig() function. + (#) Enable the Smartcard NACK using the USART_SmartCardNACKCmd() function. + (#) Enable the Smartcard interface using the USART_SmartCardCmd() function. + (#) Enable the USART using the USART_Cmd() function. + [..] + Please refer to the ISO 7816-3 specification for more details. + [..] + (@) It is also possible to choose 0.5 stop bit for receiving but it is + recommended to use 1.5 stop bits for both transmitting and receiving + to avoid switching between the two configurations. + (@) In smartcard mode, the following bits must be kept cleared: + (+@) LINEN bit in the USART_CR2 register. + (+@) HDSEL and IREN bits in the USART_CR3 register. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the specified USART guard time. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_GuardTime: specifies the guard time. + * @retval None + */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the USART Guard time */ + USARTx->GTPR &= USART_GTPR_PSC; + /* Set the USART guard time */ + USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/** + * @brief Enables or disables the USART's Smart Card mode. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the Smart Card mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_SCEN; + } + else + { + /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_SCEN); + } +} + +/** + * @brief Enables or disables NACK transmission. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the NACK transmission. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_NACK; + } + else + { + /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_NACK); + } +} + +/** + * @brief Sets the Smart Card number of retries in transmit and receive. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_AutoCount: specifies the Smart Card auto retry count. + * @retval None + */ +void USART_SetAutoRetryCount(USART_TypeDef* USARTx, uint8_t USART_AutoCount) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_AUTO_RETRY_COUNTER(USART_AutoCount)); + /* Clear the USART auto retry count */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_SCARCNT); + /* Set the USART auto retry count*/ + USARTx->CR3 |= (uint32_t)((uint32_t)USART_AutoCount << 0x11); +} + +/** + * @brief Sets the Smart Card Block length. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 3 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_BlockLength: specifies the Smart Card block length. + * @retval None + */ +void USART_SetBlockLength(USART_TypeDef* USARTx, uint8_t USART_BlockLength) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the Smart card block length */ + USARTx->RTOR &= (uint32_t)~((uint32_t)USART_RTOR_BLEN); + /* Set the Smart Card block length */ + USARTx->RTOR |= (uint32_t)((uint32_t)USART_BlockLength << 0x18); +} + +/** + * @} + */ + +/** @defgroup USART_Group9 IrDA mode functions + * @brief IrDA mode functions + * +@verbatim + =============================================================================== + ##### IrDA mode functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART + IrDA communication. + [..] IrDA is a half duplex communication protocol. If the Transmitter is busy, + any data on the IrDA receive line will be ignored by the IrDA decoder + and if the Receiver is busy, data on the TX from the USART to IrDA will + not be encoded by IrDA. While receiving data, transmission should be + avoided as the data to be transmitted could be corrupted. + [..] IrDA communication is possible through the following procedure: + (#) Program the Baud rate, Word length = 8 bits, Stop bits, Parity, + Transmitter/Receiver modes and hardware flow control values using + the USART_Init() function. + (#) Configures the IrDA pulse width by configuring the prescaler using + the USART_SetPrescaler() function. + (#) Configures the IrDA USART_IrDAMode_LowPower or USART_IrDAMode_Normal + mode using the USART_IrDAConfig() function. + (#) Enable the IrDA using the USART_IrDACmd() function. + (#) Enable the USART using the USART_Cmd() function. + [..] + (@) A pulse of width less than two and greater than one PSC period(s) may or + may not be rejected. + (@) The receiver set up time should be managed by software. The IrDA physical + layer specification specifies a minimum of 10 ms delay between + transmission and reception (IrDA is a half duplex protocol). + (@) In IrDA mode, the following bits must be kept cleared: + (+@) LINEN, STOP and CLKEN bits in the USART_CR2 register. + (+@) SCEN and HDSEL bits in the USART_CR3 register. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the USART's IrDA interface. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param USART_IrDAMode: specifies the IrDA mode. + * This parameter can be one of the following values: + * @arg USART_IrDAMode_LowPower + * @arg USART_IrDAMode_Normal + * @retval None + */ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint32_t USART_IrDAMode) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); + + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_IRLP); + USARTx->CR3 |= USART_IrDAMode; +} + +/** + * @brief Enables or disables the USART's IrDA interface. + * @note This function is not available for STM32F030 devices. + * @param USARTx: where x can be 1or 2 to select the USART peripheral. + * @note USART2 is available only for STM32F072 and STM32F091 devices. + * @note USART3 is available only for STM32F091 devices. + * @param NewState: new state of the IrDA mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_IREN; + } + else + { + /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_IREN); + } +} +/** + * @} + */ + +/** @defgroup USART_Group10 RS485 mode function + * @brief RS485 mode function + * +@verbatim + =============================================================================== + ##### RS485 mode functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART + RS485 flow control. + [..] RS485 flow control (Driver enable feature) handling is possible through + the following procedure: + (#) Program the Baud rate, Word length = 8 bits, Stop bits, Parity, + Transmitter/Receiver modes and hardware flow control values using + the USART_Init() function. + (#) Enable the Driver Enable using the USART_DECmd() function. + (#) Configures the Driver Enable polarity using the USART_DEPolarityConfig() + function. + (#) Configures the Driver Enable assertion time using USART_SetDEAssertionTime() + function and deassertion time using the USART_SetDEDeassertionTime() + function. + (#) Enable the USART using the USART_Cmd() function. + -@- + (+@) The assertion and dessertion times are expressed in sample time units (1/8 or + 1/16 bit time, depending on the oversampling rate). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the USART's DE functionality. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param NewState: new state of the driver enable mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_DECmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the DE functionality by setting the DEM bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_DEM; + } + else + { + /* Disable the DE functionality by clearing the DEM bit in the CR3 register */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DEM); + } +} + +/** + * @brief Configures the USART's DE polarity + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_DEPolarity: specifies the DE polarity. + * This parameter can be one of the following values: + * @arg USART_DEPolarity_Low + * @arg USART_DEPolarity_High + * @retval None + */ +void USART_DEPolarityConfig(USART_TypeDef* USARTx, uint32_t USART_DEPolarity) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DE_POLARITY(USART_DEPolarity)); + + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DEP); + USARTx->CR3 |= USART_DEPolarity; +} + +/** + * @brief Sets the specified RS485 DE assertion time + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_DEAssertionTime: specifies the time between the activation of + * the DE signal and the beginning of the start bit + * @retval None + */ +void USART_SetDEAssertionTime(USART_TypeDef* USARTx, uint32_t USART_DEAssertionTime) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DE_ASSERTION_DEASSERTION_TIME(USART_DEAssertionTime)); + + /* Clear the DE assertion time */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_DEAT); + /* Set the new value for the DE assertion time */ + USARTx->CR1 |=((uint32_t)USART_DEAssertionTime << (uint32_t)0x15); +} + +/** + * @brief Sets the specified RS485 DE deassertion time + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_DeassertionTime: specifies the time between the middle of the last + * stop bit in a transmitted message and the de-activation of the DE signal + * @retval None + */ +void USART_SetDEDeassertionTime(USART_TypeDef* USARTx, uint32_t USART_DEDeassertionTime) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DE_ASSERTION_DEASSERTION_TIME(USART_DEDeassertionTime)); + + /* Clear the DE deassertion time */ + USARTx->CR1 &= (uint32_t)~((uint32_t)USART_CR1_DEDT); + /* Set the new value for the DE deassertion time */ + USARTx->CR1 |=((uint32_t)USART_DEDeassertionTime << (uint32_t)0x10); +} + +/** + * @} + */ + +/** @defgroup USART_Group11 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + ##### DMA transfers management functions ##### + =============================================================================== + [..] This section provides two functions that can be used only in DMA mode. + [..] In DMA Mode, the USART communication can be managed by 2 DMA Channel + requests: + (#) USART_DMAReq_Tx: specifies the Tx buffer DMA transfer request. + (#) USART_DMAReq_Rx: specifies the Rx buffer DMA transfer request. + [..] In this Mode it is advised to use the following function: + (+) void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, + FunctionalState NewState). +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the USART's DMA interface. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_DMAReq: specifies the DMA request. + * This parameter can be any combination of the following values: + * @arg USART_DMAReq_Tx: USART DMA transmit request + * @arg USART_DMAReq_Rx: USART DMA receive request + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_DMACmd(USART_TypeDef* USARTx, uint32_t USART_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAREQ(USART_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA transfer for selected requests by setting the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 |= USART_DMAReq; + } + else + { + /* Disable the DMA transfer for selected requests by clearing the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 &= (uint32_t)~USART_DMAReq; + } +} + +/** + * @brief Enables or disables the USART's DMA interface when reception error occurs. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_DMAOnError: specifies the DMA status in case of reception error. + * This parameter can be any combination of the following values: + * @arg USART_DMAOnError_Enable: DMA receive request enabled when the USART DMA + * reception error is asserted. + * @arg USART_DMAOnError_Disable: DMA receive request disabled when the USART DMA + * reception error is asserted. + * @retval None + */ +void USART_DMAReceptionErrorConfig(USART_TypeDef* USARTx, uint32_t USART_DMAOnError) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAONERROR(USART_DMAOnError)); + + /* Clear the DMA Reception error detection bit */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DDRE); + /* Set the new value for the DMA Reception error detection bit */ + USARTx->CR3 |= USART_DMAOnError; +} + +/** + * @} + */ + +/** @defgroup USART_Group12 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to configure the + USART Interrupts sources, Requests and check or clear the flags or pending bits status. + The user should identify which mode will be used in his application to + manage the communication: Polling mode, Interrupt mode. + + *** Polling Mode *** + ==================== + [..] In Polling Mode, the SPI communication can be managed by these flags: + (#) USART_FLAG_REACK: to indicate the status of the Receive Enable + acknowledge flag + (#) USART_FLAG_TEACK: to indicate the status of the Transmit Enable + acknowledge flag. + (#) USART_FLAG_WU: to indicate the status of the Wake up flag. + (#) USART_FLAG_RWU: to indicate the status of the Receive Wake up flag. + (#) USART_FLAG_SBK: to indicate the status of the Send Break flag. + (#) USART_FLAG_CM: to indicate the status of the Character match flag. + (#) USART_FLAG_BUSY: to indicate the status of the Busy flag. + (#) USART_FLAG_ABRF: to indicate the status of the Auto baud rate flag. + (#) USART_FLAG_ABRE: to indicate the status of the Auto baud rate error flag. + (#) USART_FLAG_EOB: to indicate the status of the End of block flag. + (#) USART_FLAG_RTO: to indicate the status of the Receive time out flag. + (#) USART_FLAG_nCTSS: to indicate the status of the Inverted nCTS input + bit status. + (#) USART_FLAG_TXE: to indicate the status of the transmit buffer register. + (#) USART_FLAG_RXNE: to indicate the status of the receive buffer register. + (#) USART_FLAG_TC: to indicate the status of the transmit operation. + (#) USART_FLAG_IDLE: to indicate the status of the Idle Line. + (#) USART_FLAG_CTS: to indicate the status of the nCTS input. + (#) USART_FLAG_LBD: to indicate the status of the LIN break detection. + (#) USART_FLAG_NE: to indicate if a noise error occur. + (#) USART_FLAG_FE: to indicate if a frame error occur. + (#) USART_FLAG_PE: to indicate if a parity error occur. + (#) USART_FLAG_ORE: to indicate if an Overrun error occur. + [..] In this Mode it is advised to use the following functions: + (+) FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG). + (+) void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG). + + *** Interrupt Mode *** + ====================== + [..] In Interrupt Mode, the USART communication can be managed by 8 interrupt + sources and 10 pending bits: + (+) Pending Bits: + (##) USART_IT_WU: to indicate the status of the Wake up interrupt. + (##) USART_IT_CM: to indicate the status of Character match interrupt. + (##) USART_IT_EOB: to indicate the status of End of block interrupt. + (##) USART_IT_RTO: to indicate the status of Receive time out interrupt. + (##) USART_IT_CTS: to indicate the status of CTS change interrupt. + (##) USART_IT_LBD: to indicate the status of LIN Break detection interrupt. + (##) USART_IT_TC: to indicate the status of Transmission complete interrupt. + (##) USART_IT_IDLE: to indicate the status of IDLE line detected interrupt. + (##) USART_IT_ORE: to indicate the status of OverRun Error interrupt. + (##) USART_IT_NE: to indicate the status of Noise Error interrupt. + (##) USART_IT_FE: to indicate the status of Framing Error interrupt. + (##) USART_IT_PE: to indicate the status of Parity Error interrupt. + + (+) Interrupt Source: + (##) USART_IT_WU: specifies the interrupt source for Wake up interrupt. + (##) USART_IT_CM: specifies the interrupt source for Character match + interrupt. + (##) USART_IT_EOB: specifies the interrupt source for End of block + interrupt. + (##) USART_IT_RTO: specifies the interrupt source for Receive time-out + interrupt. + (##) USART_IT_CTS: specifies the interrupt source for CTS change interrupt. + (##) USART_IT_LBD: specifies the interrupt source for LIN Break + detection interrupt. + (##) USART_IT_TXE: specifies the interrupt source for Tansmit Data + Register empty interrupt. + (##) USART_IT_TC: specifies the interrupt source for Transmission + complete interrupt. + (##) USART_IT_RXNE: specifies the interrupt source for Receive Data + register not empty interrupt. + (##) USART_IT_IDLE: specifies the interrupt source for Idle line + detection interrupt. + (##) USART_IT_PE: specifies the interrupt source for Parity Error interrupt. + (##) USART_IT_ERR: specifies the interrupt source for Error interrupt + (Frame error, noise error, overrun error) + -@@- Some parameters are coded in order to use them as interrupt + source or as pending bits. + [..] In this Mode it is advised to use the following functions: + (+) void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState). + (+) ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT). + (+) void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified USART interrupts. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg USART_IT_WU: Wake up interrupt, not available for STM32F030 devices. + * @arg USART_IT_CM: Character match interrupt. + * @arg USART_IT_EOB: End of block interrupt, not available for STM32F030 devices. + * @arg USART_IT_RTO: Receive time out interrupt. + * @arg USART_IT_CTS: CTS change interrupt. + * @arg USART_IT_LBD: LIN Break detection interrupt, not available for STM32F030 devices. + * @arg USART_IT_TXE: Tansmit Data Register empty interrupt. + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * @arg USART_IT_IDLE: Idle line detection interrupt. + * @arg USART_IT_PE: Parity Error interrupt. + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @param NewState: new state of the specified USARTx interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ITConfig(USART_TypeDef* USARTx, uint32_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0, itpos = 0, itmask = 0; + uint32_t usartxbase = 0; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CONFIG_IT(USART_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + usartxbase = (uint32_t)USARTx; + + /* Get the USART register index */ + usartreg = (((uint16_t)USART_IT) >> 0x08); + + /* Get the interrupt position */ + itpos = USART_IT & IT_MASK; + itmask = (((uint32_t)0x01) << itpos); + + if (usartreg == 0x02) /* The IT is in CR2 register */ + { + usartxbase += 0x04; + } + else if (usartreg == 0x03) /* The IT is in CR3 register */ + { + usartxbase += 0x08; + } + else /* The IT is in CR1 register */ + { + } + if (NewState != DISABLE) + { + *(__IO uint32_t*)usartxbase |= itmask; + } + else + { + *(__IO uint32_t*)usartxbase &= ~itmask; + } +} + +/** + * @brief Enables the specified USART's Request. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_Request: specifies the USART request. + * This parameter can be any combination of the following values: + * @arg USART_Request_TXFRQ: Transmit data flush ReQuest + * @arg USART_Request_RXFRQ: Receive data flush ReQuest + * @arg USART_Request_MMRQ: Mute Mode ReQuest + * @arg USART_Request_SBKRQ: Send Break ReQuest + * @arg USART_Request_ABRRQ: Auto Baud Rate ReQuest + * @param NewState: new state of the DMA interface when reception error occurs. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_RequestCmd(USART_TypeDef* USARTx, uint32_t USART_Request, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_REQUEST(USART_Request)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART ReQuest by setting the dedicated request bit in the RQR + register.*/ + USARTx->RQR |= USART_Request; + } + else + { + /* Disable the USART ReQuest by clearing the dedicated request bit in the RQR + register.*/ + USARTx->RQR &= (uint32_t)~USART_Request; + } +} + +/** + * @brief Enables or disables the USART's Overrun detection. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_OVRDetection: specifies the OVR detection status in case of OVR error. + * This parameter can be any combination of the following values: + * @arg USART_OVRDetection_Enable: OVR error detection enabled when + * the USART OVR error is asserted. + * @arg USART_OVRDetection_Disable: OVR error detection disabled when + * the USART OVR error is asserted. + * @retval None + */ +void USART_OverrunDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_OVRDetection) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_OVRDETECTION(USART_OVRDetection)); + + /* Clear the OVR detection bit */ + USARTx->CR3 &= (uint32_t)~((uint32_t)USART_CR3_OVRDIS); + /* Set the new value for the OVR detection bit */ + USARTx->CR3 |= USART_OVRDetection; +} + +/** + * @brief Checks whether the specified USART flag is set or not. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_REACK: Receive Enable acknowledge flag. + * @arg USART_FLAG_TEACK: Transmit Enable acknowledge flag. + * @arg USART_FLAG_WU: Wake up flag, not available for STM32F030 devices. + * @arg USART_FLAG_RWU: Receive Wake up flag, not available for STM32F030 devices. + * @arg USART_FLAG_SBK: Send Break flag. + * @arg USART_FLAG_CM: Character match flag. + * @arg USART_FLAG_BUSY: Busy flag. + * @arg USART_FLAG_ABRF: Auto baud rate flag. + * @arg USART_FLAG_ABRE: Auto baud rate error flag. + * @arg USART_FLAG_EOB: End of block flag, not available for STM32F030 devices. + * @arg USART_FLAG_RTO: Receive time out flag. + * @arg USART_FLAG_nCTSS: Inverted nCTS input bit status. + * @arg USART_FLAG_CTS: CTS Change flag. + * @arg USART_FLAG_LBD: LIN Break detection flag, not available for STM32F030 devices. + * @arg USART_FLAG_TXE: Transmit data register empty flag. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * @arg USART_FLAG_IDLE: Idle Line detection flag. + * @arg USART_FLAG_ORE: OverRun Error flag. + * @arg USART_FLAG_NE: Noise Error flag. + * @arg USART_FLAG_FE: Framing Error flag. + * @arg USART_FLAG_PE: Parity Error flag. + * @retval The new state of USART_FLAG (SET or RESET). + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint32_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_FLAG(USART_FLAG)); + + if ((USARTx->ISR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the USARTx's pending flags. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_WU: Wake up flag, not available for STM32F030 devices. + * @arg USART_FLAG_CM: Character match flag. + * @arg USART_FLAG_EOB: End of block flag, not available for STM32F030 devices. + * @arg USART_FLAG_RTO: Receive time out flag. + * @arg USART_FLAG_CTS: CTS Change flag. + * @arg USART_FLAG_LBD: LIN Break detection flag, not available for STM32F030 devices. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_IDLE: IDLE line detected flag. + * @arg USART_FLAG_ORE: OverRun Error flag. + * @arg USART_FLAG_NE: Noise Error flag. + * @arg USART_FLAG_FE: Framing Error flag. + * @arg USART_FLAG_PE: Parity Errorflag. + * + * @note RXNE pending bit is cleared by a read to the USART_RDR register + * (USART_ReceiveData()) or by writing 1 to the RXFRQ in the register + * USART_RQR (USART_RequestCmd()). + * @note TC flag can be also cleared by software sequence: a read operation + * to USART_SR register (USART_GetFlagStatus()) followed by a write + * operation to USART_TDR register (USART_SendData()). + * @note TXE flag is cleared by a write to the USART_TDR register (USART_SendData()) + * or by writing 1 to the TXFRQ in the register USART_RQR (USART_RequestCmd()). + * @note SBKF flag is cleared by 1 to the SBKRQ in the register USART_RQR + * (USART_RequestCmd()). + * @retval None + */ +void USART_ClearFlag(USART_TypeDef* USARTx, uint32_t USART_FLAG) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); + + USARTx->ICR = USART_FLAG; +} + +/** + * @brief Checks whether the specified USART interrupt has occurred or not. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_IT: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_WU: Wake up interrupt, not available for STM32F030 devices. + * @arg USART_IT_CM: Character match interrupt. + * @arg USART_IT_EOB: End of block interrupt, not available for STM32F030 devices. + * @arg USART_IT_RTO: Receive time out interrupt. + * @arg USART_IT_CTS: CTS change interrupt. + * @arg USART_IT_LBD: LIN Break detection interrupt, not available for STM32F030 devices. + * @arg USART_IT_TXE: Tansmit Data Register empty interrupt. + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * @arg USART_IT_IDLE: Idle line detection interrupt. + * @arg USART_IT_ORE: OverRun Error interrupt. + * @arg USART_IT_NE: Noise Error interrupt. + * @arg USART_IT_FE: Framing Error interrupt. + * @arg USART_IT_PE: Parity Error interrupt. + * @retval The new state of USART_IT (SET or RESET). + */ +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint32_t USART_IT) +{ + uint32_t bitpos = 0, itmask = 0, usartreg = 0; + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_GET_IT(USART_IT)); + + /* Get the USART register index */ + usartreg = (((uint16_t)USART_IT) >> 0x08); + /* Get the interrupt position */ + itmask = USART_IT & IT_MASK; + itmask = (uint32_t)0x01 << itmask; + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + itmask &= USARTx->CR1; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + itmask &= USARTx->CR2; + } + else /* The IT is in CR3 register */ + { + itmask &= USARTx->CR3; + } + + bitpos = USART_IT >> 0x10; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->ISR; + if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/** + * @brief Clears the USARTx's interrupt pending bits. + * @param USARTx: where x can be from 1 to 8 to select the USART peripheral. + * @note USART3 and USART4 are available only for STM32F072 and STM32F091 devices. + * @note USART5, USART6, USART7 and USART8 are available only for STM32F091 devices. + * @note USART2 is not available for STM32F031 devices. + * @param USART_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg USART_IT_WU: Wake up interrupt, not available for STM32F030 devices. + * @arg USART_IT_CM: Character match interrupt. + * @arg USART_IT_EOB: End of block interrupt, not available for STM32F030 devices. + * @arg USART_IT_RTO: Receive time out interrupt. + * @arg USART_IT_CTS: CTS change interrupt. + * @arg USART_IT_LBD: LIN Break detection interrupt, not available for STM32F030 devices. + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_IDLE: IDLE line detected interrupt. + * @arg USART_IT_ORE: OverRun Error interrupt. + * @arg USART_IT_NE: Noise Error interrupt. + * @arg USART_IT_FE: Framing Error interrupt. + * @arg USART_IT_PE: Parity Error interrupt. + * + * @note RXNE pending bit is cleared by a read to the USART_RDR register + * (USART_ReceiveData()) or by writing 1 to the RXFRQ in the register + * USART_RQR (USART_RequestCmd()). + * @note TC pending bit can be also cleared by software sequence: a read + * operation to USART_SR register (USART_GetITStatus()) followed by + * a write operation to USART_TDR register (USART_SendData()). + * @note TXE pending bit is cleared by a write to the USART_TDR register + * (USART_SendData()) or by writing 1 to the TXFRQ in the register + * USART_RQR (USART_RequestCmd()). + * @retval None + */ +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint32_t USART_IT) +{ + uint32_t bitpos = 0, itmask = 0; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_IT(USART_IT)); + + bitpos = USART_IT >> 0x10; + itmask = ((uint32_t)0x01 << (uint32_t)bitpos); + USARTx->ICR = (uint32_t)itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_wwdg.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_wwdg.c new file mode 100644 index 0000000..429ef8d --- /dev/null +++ b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_wwdg.c @@ -0,0 +1,295 @@ +/** + ****************************************************************************** + * @file stm32f0xx_wwdg.c + * @author MCD Application Team + * @version V1.5.1 + * @date 13-October-2021 + * @brief This file provides firmware functions to manage the following + * functionalities of the Window watchdog (WWDG) peripheral: + * + Prescaler, Refresh window and Counter configuration + * + WWDG activation + * + Interrupts and flags management + * + * @verbatim + * + ============================================================================== + ##### WWDG features ##### + ============================================================================== + [..] Once enabled the WWDG generates a system reset on expiry of a programmed + time period, unless the program refreshes the counter (downcounter) + before to reach 0x3F value (i.e. a reset is generated when the counter + value rolls over from 0x40 to 0x3F). + [..] An MCU reset is also generated if the counter value is refreshed + before the counter has reached the refresh window value. This + implies that the counter must be refreshed in a limited window. + + [..] Once enabled the WWDG cannot be disabled except by a system reset. + + [..] WWDGRST flag in RCC_CSR register can be used to inform when a WWDG + reset occurs. + + [..] The WWDG counter input clock is derived from the APB clock divided + by a programmable prescaler. + + [..] WWDG counter clock = PCLK1 / Prescaler. + [..] WWDG timeout = (WWDG counter clock) * (counter value). + + [..] Min-max timeout value @32MHz (PCLK1): ~85us / ~43ms. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable WWDG clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE) + function. + + (#) Configure the WWDG prescaler using WWDG_SetPrescaler() function. + + (#) Configure the WWDG refresh window using WWDG_SetWindowValue() function. + + (#) Set the WWDG counter value and start it using WWDG_Enable() function. + When the WWDG is enabled the counter value should be configured to + a value greater than 0x40 to prevent generating an immediate reset. + + (#) Optionally you can enable the Early wakeup interrupt which is + generated when the counter reach 0x40. + Once enabled this interrupt cannot be disabled except by a system reset. + + (#) Then the application program must refresh the WWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + WWDG_SetCounter() function. This operation must occur only when + the counter value is lower than the refresh window value, + programmed using WWDG_SetWindowValue(). + + * @endverbatim + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_wwdg.h" +#include "stm32f0xx_rcc.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup WWDG + * @brief WWDG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* --------------------- WWDG registers bit mask ---------------------------- */ +/* CFR register bit mask */ +#define CFR_WDGTB_MASK ((uint32_t)0xFFFFFE7F) +#define CFR_W_MASK ((uint32_t)0xFFFFFF80) +#define BIT_MASK ((uint8_t)0x7F) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup WWDG_Private_Functions + * @{ + */ + +/** @defgroup WWDG_Group1 Prescaler, Refresh window and Counter configuration functions + * @brief Prescaler, Refresh window and Counter configuration functions + * +@verbatim + ============================================================================== + ##### Prescaler, Refresh window and Counter configuration functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the WWDG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void WWDG_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); +} + +/** + * @brief Sets the WWDG Prescaler. + * @param WWDG_Prescaler: specifies the WWDG Prescaler. + * This parameter can be one of the following values: + * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 + * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 + * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 + * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 + * @retval None + */ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); + /* Clear WDGTB[1:0] bits */ + tmpreg = WWDG->CFR & CFR_WDGTB_MASK; + /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ + tmpreg |= WWDG_Prescaler; + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Sets the WWDG window value. + * @param WindowValue: specifies the window value to be compared to the downcounter. + * This parameter value must be lower than 0x80. + * @retval None + */ +void WWDG_SetWindowValue(uint8_t WindowValue) +{ + __IO uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); + /* Clear W[6:0] bits */ + + tmpreg = WWDG->CFR & CFR_W_MASK; + + /* Set W[6:0] bits according to WindowValue value */ + tmpreg |= WindowValue & (uint32_t) BIT_MASK; + + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Enables the WWDG Early Wakeup interrupt(EWI). + * @note Once enabled this interrupt cannot be disabled except by a system reset. + * @param None + * @retval None + */ +void WWDG_EnableIT(void) +{ + WWDG->CFR |= WWDG_CFR_EWI; +} + +/** + * @brief Sets the WWDG counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F (to prevent + * generating an immediate reset). + * @retval None + */ +void WWDG_SetCounter(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + /* Write to T[6:0] bits to configure the counter value, no need to do + a read-modify-write; writing a 0 to WDGA bit does nothing */ + WWDG->CR = Counter & BIT_MASK; +} + +/** + * @} + */ + +/** @defgroup WWDG_Group2 WWDG activation functions + * @brief WWDG activation functions + * +@verbatim + ============================================================================== + ##### WWDG activation function ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables WWDG and load the counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F (to prevent + * generating an immediate reset). + * @retval None + */ +void WWDG_Enable(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + WWDG->CR = WWDG_CR_WDGA | Counter; +} + +/** + * @} + */ + +/** @defgroup WWDG_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + ============================================================================== + ##### Interrupts and flags management functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the Early Wakeup interrupt flag is set or not. + * @param None + * @retval The new state of the Early Wakeup interrupt flag (SET or RESET). + */ +FlagStatus WWDG_GetFlagStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((WWDG->SR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears Early Wakeup interrupt flag. + * @param None + * @retval None + */ +void WWDG_ClearFlag(void) +{ + WWDG->SR = (uint32_t)RESET; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Listings/template_f072.map b/Listings/template_f072.map new file mode 100644 index 0000000..c283bb6 --- /dev/null +++ b/Listings/template_f072.map @@ -0,0 +1,33 @@ +Component: Arm Compiler for Embedded 6.18 Tool: armlink [5e4cc100] + +============================================================================== + +Section Cross References + + startup_stm32f070xb.o(RESET) refers to startup_stm32f070xb.o(STACK) for __initial_sp + startup_stm32f070xb.o(RESET) refers to startup_stm32f070xb.o(.text) for Reset_Handler + startup_stm32f070xb.o(.text) refers to startup_stm32f070xb.o(STACK) for __initial_sp + startup_stm32f070xb.o(.text) refers to entry.o(.ARM.Collect$$$$00000000) for __main + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry10a.o(.ARM.Collect$$$$0000000D) for __rt_final_cpp + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry11a.o(.ARM.Collect$$$$0000000F) for __rt_final_exit + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry7b.o(.ARM.Collect$$$$00000008) for _main_clock + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry8b.o(.ARM.Collect$$$$0000000A) for _main_cpp_init + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry9a.o(.ARM.Collect$$$$0000000B) for _main_init + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry5.o(.ARM.Collect$$$$00000004) for _main_scatterload + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry2.o(.ARM.Collect$$$$00000001) for _main_stk + entry2.o(.ARM.Collect$$$$00000001) refers to entry2.o(.ARM.Collect$$$$00002712) for __lit__00000000 + entry2.o(.ARM.Collect$$$$00002712) refers to startup_stm32f070xb.o(STACK) for __initial_sp + entry2.o(__vectab_stack_and_reset_area) refers to startup_stm32f070xb.o(STACK) for __initial_sp + entry2.o(__vectab_stack_and_reset_area) refers to entry.o(.ARM.Collect$$$$00000000) for __main + entry5.o(.ARM.Collect$$$$00000004) refers to init.o(.text) for __scatterload + init.o(.text) refers to entry5.o(.ARM.Collect$$$$00000004) for __main_after_scatterload + + +============================================================================== + +Removing Unused input sections from the image. + + Removing startup_stm32f070xb.o(HEAP), (512 bytes). + Removing main.o(.text), (0 bytes). + +2 unused section(s) (total 512 bytes) removed from the image. diff --git a/Project/MDK/DebugConfig/Target_1_STM32F072RBTx.dbgconf b/Project/MDK/DebugConfig/Target_1_STM32F072RBTx.dbgconf new file mode 100644 index 0000000..003699f --- /dev/null +++ b/Project/MDK/DebugConfig/Target_1_STM32F072RBTx.dbgconf @@ -0,0 +1,45 @@ +// File: STM32F0x1_0x2_0x8.dbgconf +// Version: 1.0.0 +// Note: refer to STM32F0x1/STM32F0x2/STM32F0x8 Reference manual (RM0091) +// refer to STM32F031x4/x6, STM32F051x4/x6/x8, STM32F071x8/xB datasheets +// STM32F091xB/xC, STM32F042x4/x6, STM32F072x8/xB, STM32F038x6 datasheets +// STM32F048x6, STM32F058x8, STM32F078xB, STM32F098xC datasheets + +// <<< Use Configuration Wizard in Context Menu >>> + +// Debug MCU configuration register (DBGMCU_CR) +// DBG_STANDBY Debug standby mode +// DBG_STOP Debug stop mode +// +DbgMCU_CR = 0x00000006; + +// Debug MCU APB1 freeze register (DBGMCU_APB1_FZ) +// Reserved bits must be kept at reset value +// DBG_CAN_STOP CAN stopped when core is halted +// DBG_I2C1_TIMEOUT I2C1 SMBUS timeout mode stopped when core is halted +// DBG_IWDG_STOP Independent watchdog stopped when core is halted +// DBG_WWDG_STOP Window watchdog stopped when core is halted +// DBG_RTC_STOP RTC stopped when core is halted +// DBG_TIM14_STOP TIM14 counter stopped when core is halted +// DBG_TIM7_STOP TIM7 counter stopped when core is halted +// DBG_TIM6_STOP TIM6 counter stopped when core is halted +// DBG_TIM3_STOP TIM3 counter stopped when core is halted +// DBG_TIM2_STOP TIM2 counter stopped when core is halted +// +DbgMCU_APB1_Fz = 0x00000000; + +// Debug MCU APB2 freeze register (DBGMCU_APB2_FZ) +// Reserved bits must be kept at reset value +// DBG_TIM17_STOP TIM17 counter stopped when core is halted +// DBG_TIM16_STOP TIM16 counter stopped when core is halted +// DBG_TIM15_STOP TIM15 counter stopped when core is halted +// DBG_TIM1_STOP TIM1 counter stopped when core is halted +// +DbgMCU_APB2_Fz = 0x00000000; + +// Flash Download Options +// Option Byte Loading Launch the Option Byte Loading after a Flash Download by setting the OBL_LAUNCH bit (causes a reset) +// +DoOptionByteLoading = 0x00000000; + +// <<< end of configuration section >>> diff --git a/Project/MDK/Listings/Template.map b/Project/MDK/Listings/Template.map new file mode 100644 index 0000000..6703997 --- /dev/null +++ b/Project/MDK/Listings/Template.map @@ -0,0 +1,2013 @@ +Component: Arm Compiler for Embedded 6.18 Tool: armlink [5e4cc100] + +============================================================================== + +Section Cross References + + startup_stm32f072.o(RESET) refers to startup_stm32f072.o(STACK) for __initial_sp + startup_stm32f072.o(RESET) refers to startup_stm32f072.o(.text) for Reset_Handler + startup_stm32f072.o(RESET) refers to stm32f0xx_it.o(.text.NMI_Handler) for NMI_Handler + startup_stm32f072.o(RESET) refers to stm32f0xx_it.o(.text.HardFault_Handler) for HardFault_Handler + startup_stm32f072.o(RESET) refers to stm32f0xx_it.o(.text.SVC_Handler) for SVC_Handler + startup_stm32f072.o(RESET) refers to stm32f0xx_it.o(.text.PendSV_Handler) for PendSV_Handler + startup_stm32f072.o(RESET) refers to stm32f0xx_it.o(.text.SysTick_Handler) for SysTick_Handler + startup_stm32f072.o(.text) refers to startup_stm32f072.o(STACK) for __initial_sp + startup_stm32f072.o(.text) refers to system_stm32f0xx.o(.text.SystemInit) for SystemInit + startup_stm32f072.o(.text) refers to entry.o(.ARM.Collect$$$$00000000) for __main + system_stm32f0xx.o(.ARM.exidx.text.SystemInit) refers to system_stm32f0xx.o(.text.SystemInit) for [Anonymous Symbol] + system_stm32f0xx.o(.text.SystemCoreClockUpdate) refers to uidiv_div0.o(.text) for __aeabi_uidiv + system_stm32f0xx.o(.text.SystemCoreClockUpdate) refers to system_stm32f0xx.o(.data.SystemCoreClock) for SystemCoreClock + system_stm32f0xx.o(.text.SystemCoreClockUpdate) refers to system_stm32f0xx.o(.rodata.AHBPrescTable) for AHBPrescTable + system_stm32f0xx.o(.ARM.exidx.text.SystemCoreClockUpdate) refers to system_stm32f0xx.o(.text.SystemCoreClockUpdate) for [Anonymous Symbol] + stm32f0xx_adc.o(.text.ADC_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd + stm32f0xx_adc.o(.ARM.exidx.text.ADC_DeInit) refers to stm32f0xx_adc.o(.text.ADC_DeInit) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_Init) refers to stm32f0xx_adc.o(.text.ADC_Init) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_StructInit) refers to stm32f0xx_adc.o(.text.ADC_StructInit) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_Cmd) refers to stm32f0xx_adc.o(.text.ADC_Cmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_ClockModeConfig) refers to stm32f0xx_adc.o(.text.ADC_ClockModeConfig) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_JitterCmd) refers to stm32f0xx_adc.o(.text.ADC_JitterCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_AutoPowerOffCmd) refers to stm32f0xx_adc.o(.text.ADC_AutoPowerOffCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_WaitModeCmd) refers to stm32f0xx_adc.o(.text.ADC_WaitModeCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogCmd) refers to stm32f0xx_adc.o(.text.ADC_AnalogWatchdogCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogThresholdsConfig) refers to stm32f0xx_adc.o(.text.ADC_AnalogWatchdogThresholdsConfig) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogSingleChannelConfig) refers to stm32f0xx_adc.o(.text.ADC_AnalogWatchdogSingleChannelConfig) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogSingleChannelCmd) refers to stm32f0xx_adc.o(.text.ADC_AnalogWatchdogSingleChannelCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_TempSensorCmd) refers to stm32f0xx_adc.o(.text.ADC_TempSensorCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_VrefintCmd) refers to stm32f0xx_adc.o(.text.ADC_VrefintCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_VbatCmd) refers to stm32f0xx_adc.o(.text.ADC_VbatCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_ChannelConfig) refers to stm32f0xx_adc.o(.text.ADC_ChannelConfig) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_ContinuousModeCmd) refers to stm32f0xx_adc.o(.text.ADC_ContinuousModeCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_DiscModeCmd) refers to stm32f0xx_adc.o(.text.ADC_DiscModeCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_OverrunModeCmd) refers to stm32f0xx_adc.o(.text.ADC_OverrunModeCmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetCalibrationFactor) refers to stm32f0xx_adc.o(.text.ADC_GetCalibrationFactor) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_StopOfConversion) refers to stm32f0xx_adc.o(.text.ADC_StopOfConversion) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_StartOfConversion) refers to stm32f0xx_adc.o(.text.ADC_StartOfConversion) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetConversionValue) refers to stm32f0xx_adc.o(.text.ADC_GetConversionValue) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_DMACmd) refers to stm32f0xx_adc.o(.text.ADC_DMACmd) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_DMARequestModeConfig) refers to stm32f0xx_adc.o(.text.ADC_DMARequestModeConfig) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_ITConfig) refers to stm32f0xx_adc.o(.text.ADC_ITConfig) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetFlagStatus) refers to stm32f0xx_adc.o(.text.ADC_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_ClearFlag) refers to stm32f0xx_adc.o(.text.ADC_ClearFlag) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetITStatus) refers to stm32f0xx_adc.o(.text.ADC_GetITStatus) for [Anonymous Symbol] + stm32f0xx_adc.o(.ARM.exidx.text.ADC_ClearITPendingBit) refers to stm32f0xx_adc.o(.text.ADC_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_can.o(.text.CAN_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_can.o(.ARM.exidx.text.CAN_DeInit) refers to stm32f0xx_can.o(.text.CAN_DeInit) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_Init) refers to stm32f0xx_can.o(.text.CAN_Init) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_FilterInit) refers to stm32f0xx_can.o(.text.CAN_FilterInit) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_StructInit) refers to stm32f0xx_can.o(.text.CAN_StructInit) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_SlaveStartBank) refers to stm32f0xx_can.o(.text.CAN_SlaveStartBank) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_DBGFreeze) refers to stm32f0xx_can.o(.text.CAN_DBGFreeze) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_TTComModeCmd) refers to stm32f0xx_can.o(.text.CAN_TTComModeCmd) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_Transmit) refers to stm32f0xx_can.o(.text.CAN_Transmit) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_TransmitStatus) refers to stm32f0xx_can.o(.text.CAN_TransmitStatus) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_CancelTransmit) refers to stm32f0xx_can.o(.text.CAN_CancelTransmit) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_Receive) refers to stm32f0xx_can.o(.text.CAN_Receive) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_FIFORelease) refers to stm32f0xx_can.o(.text.CAN_FIFORelease) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_MessagePending) refers to stm32f0xx_can.o(.text.CAN_MessagePending) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_OperatingModeRequest) refers to stm32f0xx_can.o(.text.CAN_OperatingModeRequest) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_Sleep) refers to stm32f0xx_can.o(.text.CAN_Sleep) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_WakeUp) refers to stm32f0xx_can.o(.text.CAN_WakeUp) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_GetLastErrorCode) refers to stm32f0xx_can.o(.text.CAN_GetLastErrorCode) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_GetReceiveErrorCounter) refers to stm32f0xx_can.o(.text.CAN_GetReceiveErrorCounter) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_GetLSBTransmitErrorCounter) refers to stm32f0xx_can.o(.text.CAN_GetLSBTransmitErrorCounter) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_ITConfig) refers to stm32f0xx_can.o(.text.CAN_ITConfig) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_GetFlagStatus) refers to stm32f0xx_can.o(.text.CAN_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_ClearFlag) refers to stm32f0xx_can.o(.text.CAN_ClearFlag) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_GetITStatus) refers to stm32f0xx_can.o(.text.CAN_GetITStatus) for [Anonymous Symbol] + stm32f0xx_can.o(.ARM.exidx.text.CAN_ClearITPendingBit) refers to stm32f0xx_can.o(.text.CAN_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_cec.o(.text.CEC_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_cec.o(.ARM.exidx.text.CEC_DeInit) refers to stm32f0xx_cec.o(.text.CEC_DeInit) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_Init) refers to stm32f0xx_cec.o(.text.CEC_Init) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_StructInit) refers to stm32f0xx_cec.o(.text.CEC_StructInit) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_Cmd) refers to stm32f0xx_cec.o(.text.CEC_Cmd) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_ListenModeCmd) refers to stm32f0xx_cec.o(.text.CEC_ListenModeCmd) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_OwnAddressConfig) refers to stm32f0xx_cec.o(.text.CEC_OwnAddressConfig) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_OwnAddressClear) refers to stm32f0xx_cec.o(.text.CEC_OwnAddressClear) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_SendData) refers to stm32f0xx_cec.o(.text.CEC_SendData) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_ReceiveData) refers to stm32f0xx_cec.o(.text.CEC_ReceiveData) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_StartOfMessage) refers to stm32f0xx_cec.o(.text.CEC_StartOfMessage) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_EndOfMessage) refers to stm32f0xx_cec.o(.text.CEC_EndOfMessage) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_ITConfig) refers to stm32f0xx_cec.o(.text.CEC_ITConfig) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_GetFlagStatus) refers to stm32f0xx_cec.o(.text.CEC_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_ClearFlag) refers to stm32f0xx_cec.o(.text.CEC_ClearFlag) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_GetITStatus) refers to stm32f0xx_cec.o(.text.CEC_GetITStatus) for [Anonymous Symbol] + stm32f0xx_cec.o(.ARM.exidx.text.CEC_ClearITPendingBit) refers to stm32f0xx_cec.o(.text.CEC_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_DeInit) refers to stm32f0xx_comp.o(.text.COMP_DeInit) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_Init) refers to stm32f0xx_comp.o(.text.COMP_Init) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_StructInit) refers to stm32f0xx_comp.o(.text.COMP_StructInit) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_Cmd) refers to stm32f0xx_comp.o(.text.COMP_Cmd) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_SwitchCmd) refers to stm32f0xx_comp.o(.text.COMP_SwitchCmd) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_GetOutputLevel) refers to stm32f0xx_comp.o(.text.COMP_GetOutputLevel) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_WindowCmd) refers to stm32f0xx_comp.o(.text.COMP_WindowCmd) for [Anonymous Symbol] + stm32f0xx_comp.o(.ARM.exidx.text.COMP_LockConfig) refers to stm32f0xx_comp.o(.text.COMP_LockConfig) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_DeInit) refers to stm32f0xx_crc.o(.text.CRC_DeInit) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_ResetDR) refers to stm32f0xx_crc.o(.text.CRC_ResetDR) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_PolynomialSizeSelect) refers to stm32f0xx_crc.o(.text.CRC_PolynomialSizeSelect) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_ReverseInputDataSelect) refers to stm32f0xx_crc.o(.text.CRC_ReverseInputDataSelect) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_ReverseOutputDataCmd) refers to stm32f0xx_crc.o(.text.CRC_ReverseOutputDataCmd) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_SetInitRegister) refers to stm32f0xx_crc.o(.text.CRC_SetInitRegister) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_SetPolynomial) refers to stm32f0xx_crc.o(.text.CRC_SetPolynomial) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcCRC) refers to stm32f0xx_crc.o(.text.CRC_CalcCRC) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcCRC16bits) refers to stm32f0xx_crc.o(.text.CRC_CalcCRC16bits) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcCRC8bits) refers to stm32f0xx_crc.o(.text.CRC_CalcCRC8bits) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcBlockCRC) refers to stm32f0xx_crc.o(.text.CRC_CalcBlockCRC) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_GetCRC) refers to stm32f0xx_crc.o(.text.CRC_GetCRC) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_SetIDRegister) refers to stm32f0xx_crc.o(.text.CRC_SetIDRegister) for [Anonymous Symbol] + stm32f0xx_crc.o(.ARM.exidx.text.CRC_GetIDRegister) refers to stm32f0xx_crc.o(.text.CRC_GetIDRegister) for [Anonymous Symbol] + stm32f0xx_crs.o(.text.CRS_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_crs.o(.ARM.exidx.text.CRS_DeInit) refers to stm32f0xx_crs.o(.text.CRS_DeInit) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_AdjustHSI48CalibrationValue) refers to stm32f0xx_crs.o(.text.CRS_AdjustHSI48CalibrationValue) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_FrequencyErrorCounterCmd) refers to stm32f0xx_crs.o(.text.CRS_FrequencyErrorCounterCmd) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_AutomaticCalibrationCmd) refers to stm32f0xx_crs.o(.text.CRS_AutomaticCalibrationCmd) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_SoftwareSynchronizationGenerate) refers to stm32f0xx_crs.o(.text.CRS_SoftwareSynchronizationGenerate) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_FrequencyErrorCounterReload) refers to stm32f0xx_crs.o(.text.CRS_FrequencyErrorCounterReload) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_FrequencyErrorLimitConfig) refers to stm32f0xx_crs.o(.text.CRS_FrequencyErrorLimitConfig) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_SynchronizationPrescalerConfig) refers to stm32f0xx_crs.o(.text.CRS_SynchronizationPrescalerConfig) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_SynchronizationSourceConfig) refers to stm32f0xx_crs.o(.text.CRS_SynchronizationSourceConfig) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_SynchronizationPolarityConfig) refers to stm32f0xx_crs.o(.text.CRS_SynchronizationPolarityConfig) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetReloadValue) refers to stm32f0xx_crs.o(.text.CRS_GetReloadValue) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetHSI48CalibrationValue) refers to stm32f0xx_crs.o(.text.CRS_GetHSI48CalibrationValue) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetFrequencyErrorValue) refers to stm32f0xx_crs.o(.text.CRS_GetFrequencyErrorValue) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetFrequencyErrorDirection) refers to stm32f0xx_crs.o(.text.CRS_GetFrequencyErrorDirection) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_ITConfig) refers to stm32f0xx_crs.o(.text.CRS_ITConfig) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetFlagStatus) refers to stm32f0xx_crs.o(.text.CRS_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_ClearFlag) refers to stm32f0xx_crs.o(.text.CRS_ClearFlag) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetITStatus) refers to stm32f0xx_crs.o(.text.CRS_GetITStatus) for [Anonymous Symbol] + stm32f0xx_crs.o(.ARM.exidx.text.CRS_ClearITPendingBit) refers to stm32f0xx_crs.o(.text.CRS_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_dac.o(.text.DAC_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_dac.o(.ARM.exidx.text.DAC_DeInit) refers to stm32f0xx_dac.o(.text.DAC_DeInit) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_Init) refers to stm32f0xx_dac.o(.text.DAC_Init) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_StructInit) refers to stm32f0xx_dac.o(.text.DAC_StructInit) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_Cmd) refers to stm32f0xx_dac.o(.text.DAC_Cmd) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_SoftwareTriggerCmd) refers to stm32f0xx_dac.o(.text.DAC_SoftwareTriggerCmd) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_DualSoftwareTriggerCmd) refers to stm32f0xx_dac.o(.text.DAC_DualSoftwareTriggerCmd) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_WaveGenerationCmd) refers to stm32f0xx_dac.o(.text.DAC_WaveGenerationCmd) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_SetChannel1Data) refers to stm32f0xx_dac.o(.text.DAC_SetChannel1Data) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_SetChannel2Data) refers to stm32f0xx_dac.o(.text.DAC_SetChannel2Data) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_SetDualChannelData) refers to stm32f0xx_dac.o(.text.DAC_SetDualChannelData) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_GetDataOutputValue) refers to stm32f0xx_dac.o(.text.DAC_GetDataOutputValue) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_DMACmd) refers to stm32f0xx_dac.o(.text.DAC_DMACmd) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_ITConfig) refers to stm32f0xx_dac.o(.text.DAC_ITConfig) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_GetFlagStatus) refers to stm32f0xx_dac.o(.text.DAC_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_ClearFlag) refers to stm32f0xx_dac.o(.text.DAC_ClearFlag) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_GetITStatus) refers to stm32f0xx_dac.o(.text.DAC_GetITStatus) for [Anonymous Symbol] + stm32f0xx_dac.o(.ARM.exidx.text.DAC_ClearITPendingBit) refers to stm32f0xx_dac.o(.text.DAC_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_GetREVID) refers to stm32f0xx_dbgmcu.o(.text.DBGMCU_GetREVID) for [Anonymous Symbol] + stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_GetDEVID) refers to stm32f0xx_dbgmcu.o(.text.DBGMCU_GetDEVID) for [Anonymous Symbol] + stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_Config) refers to stm32f0xx_dbgmcu.o(.text.DBGMCU_Config) for [Anonymous Symbol] + stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_APB1PeriphConfig) refers to stm32f0xx_dbgmcu.o(.text.DBGMCU_APB1PeriphConfig) for [Anonymous Symbol] + stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_APB2PeriphConfig) refers to stm32f0xx_dbgmcu.o(.text.DBGMCU_APB2PeriphConfig) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_DeInit) refers to stm32f0xx_dma.o(.text.DMA_DeInit) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_Init) refers to stm32f0xx_dma.o(.text.DMA_Init) for [Anonymous Symbol] + stm32f0xx_dma.o(.text.DMA_StructInit) refers to memseta.o(.text) for __aeabi_memclr4 + stm32f0xx_dma.o(.ARM.exidx.text.DMA_StructInit) refers to stm32f0xx_dma.o(.text.DMA_StructInit) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_Cmd) refers to stm32f0xx_dma.o(.text.DMA_Cmd) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_RemapConfig) refers to stm32f0xx_dma.o(.text.DMA_RemapConfig) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_SetCurrDataCounter) refers to stm32f0xx_dma.o(.text.DMA_SetCurrDataCounter) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_GetCurrDataCounter) refers to stm32f0xx_dma.o(.text.DMA_GetCurrDataCounter) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_ITConfig) refers to stm32f0xx_dma.o(.text.DMA_ITConfig) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_GetFlagStatus) refers to stm32f0xx_dma.o(.text.DMA_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_ClearFlag) refers to stm32f0xx_dma.o(.text.DMA_ClearFlag) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_GetITStatus) refers to stm32f0xx_dma.o(.text.DMA_GetITStatus) for [Anonymous Symbol] + stm32f0xx_dma.o(.ARM.exidx.text.DMA_ClearITPendingBit) refers to stm32f0xx_dma.o(.text.DMA_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_DeInit) refers to stm32f0xx_exti.o(.text.EXTI_DeInit) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_Init) refers to stm32f0xx_exti.o(.text.EXTI_Init) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_StructInit) refers to stm32f0xx_exti.o(.text.EXTI_StructInit) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_GenerateSWInterrupt) refers to stm32f0xx_exti.o(.text.EXTI_GenerateSWInterrupt) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_GetFlagStatus) refers to stm32f0xx_exti.o(.text.EXTI_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_ClearFlag) refers to stm32f0xx_exti.o(.text.EXTI_ClearFlag) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_GetITStatus) refers to stm32f0xx_exti.o(.text.EXTI_GetITStatus) for [Anonymous Symbol] + stm32f0xx_exti.o(.ARM.exidx.text.EXTI_ClearITPendingBit) refers to stm32f0xx_exti.o(.text.EXTI_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_SetLatency) refers to stm32f0xx_flash.o(.text.FLASH_SetLatency) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_PrefetchBufferCmd) refers to stm32f0xx_flash.o(.text.FLASH_PrefetchBufferCmd) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_GetPrefetchBufferStatus) refers to stm32f0xx_flash.o(.text.FLASH_GetPrefetchBufferStatus) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_Unlock) refers to stm32f0xx_flash.o(.text.FLASH_Unlock) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_Lock) refers to stm32f0xx_flash.o(.text.FLASH_Lock) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ErasePage) refers to stm32f0xx_flash.o(.text.FLASH_ErasePage) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_WaitForLastOperation) refers to stm32f0xx_flash.o(.text.FLASH_WaitForLastOperation) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_EraseAllPages) refers to stm32f0xx_flash.o(.text.FLASH_EraseAllPages) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ProgramWord) refers to stm32f0xx_flash.o(.text.FLASH_ProgramWord) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ProgramHalfWord) refers to stm32f0xx_flash.o(.text.FLASH_ProgramHalfWord) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Unlock) refers to stm32f0xx_flash.o(.text.FLASH_OB_Unlock) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Lock) refers to stm32f0xx_flash.o(.text.FLASH_OB_Lock) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Launch) refers to stm32f0xx_flash.o(.text.FLASH_OB_Launch) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Erase) refers to stm32f0xx_flash.o(.text.FLASH_OB_Erase) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_GetRDP) refers to stm32f0xx_flash.o(.text.FLASH_OB_GetRDP) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_EnableWRP) refers to stm32f0xx_flash.o(.text.FLASH_OB_EnableWRP) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_RDPConfig) refers to stm32f0xx_flash.o(.text.FLASH_OB_RDPConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_UserConfig) refers to stm32f0xx_flash.o(.text.FLASH_OB_UserConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_BOOTConfig) refers to stm32f0xx_flash.o(.text.FLASH_OB_BOOTConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_BOOT0Config) refers to stm32f0xx_flash.o(.text.FLASH_OB_BOOT0Config) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_BOOT0SWConfig) refers to stm32f0xx_flash.o(.text.FLASH_OB_BOOT0SWConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_VDDAConfig) refers to stm32f0xx_flash.o(.text.FLASH_OB_VDDAConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_SRAMParityConfig) refers to stm32f0xx_flash.o(.text.FLASH_OB_SRAMParityConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_WriteUser) refers to stm32f0xx_flash.o(.text.FLASH_OB_WriteUser) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_ProgramData) refers to stm32f0xx_flash.o(.text.FLASH_OB_ProgramData) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_GetUser) refers to stm32f0xx_flash.o(.text.FLASH_OB_GetUser) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_GetWRP) refers to stm32f0xx_flash.o(.text.FLASH_OB_GetWRP) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ITConfig) refers to stm32f0xx_flash.o(.text.FLASH_ITConfig) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_GetFlagStatus) refers to stm32f0xx_flash.o(.text.FLASH_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ClearFlag) refers to stm32f0xx_flash.o(.text.FLASH_ClearFlag) for [Anonymous Symbol] + stm32f0xx_flash.o(.ARM.exidx.text.FLASH_GetStatus) refers to stm32f0xx_flash.o(.text.FLASH_GetStatus) for [Anonymous Symbol] + stm32f0xx_gpio.o(.text.GPIO_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_AHBPeriphResetCmd) for RCC_AHBPeriphResetCmd + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_DeInit) refers to stm32f0xx_gpio.o(.text.GPIO_DeInit) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_Init) refers to stm32f0xx_gpio.o(.text.GPIO_Init) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_StructInit) refers to stm32f0xx_gpio.o(.text.GPIO_StructInit) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_PinLockConfig) refers to stm32f0xx_gpio.o(.text.GPIO_PinLockConfig) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadInputDataBit) refers to stm32f0xx_gpio.o(.text.GPIO_ReadInputDataBit) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadInputData) refers to stm32f0xx_gpio.o(.text.GPIO_ReadInputData) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadOutputDataBit) refers to stm32f0xx_gpio.o(.text.GPIO_ReadOutputDataBit) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadOutputData) refers to stm32f0xx_gpio.o(.text.GPIO_ReadOutputData) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_SetBits) refers to stm32f0xx_gpio.o(.text.GPIO_SetBits) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ResetBits) refers to stm32f0xx_gpio.o(.text.GPIO_ResetBits) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_WriteBit) refers to stm32f0xx_gpio.o(.text.GPIO_WriteBit) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_Write) refers to stm32f0xx_gpio.o(.text.GPIO_Write) for [Anonymous Symbol] + stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_PinAFConfig) refers to stm32f0xx_gpio.o(.text.GPIO_PinAFConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.text.I2C_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_DeInit) refers to stm32f0xx_i2c.o(.text.I2C_DeInit) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_Init) refers to stm32f0xx_i2c.o(.text.I2C_Init) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_StructInit) refers to stm32f0xx_i2c.o(.text.I2C_StructInit) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_Cmd) refers to stm32f0xx_i2c.o(.text.I2C_Cmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SoftwareResetCmd) refers to stm32f0xx_i2c.o(.text.I2C_SoftwareResetCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ITConfig) refers to stm32f0xx_i2c.o(.text.I2C_ITConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_StretchClockCmd) refers to stm32f0xx_i2c.o(.text.I2C_StretchClockCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_StopModeCmd) refers to stm32f0xx_i2c.o(.text.I2C_StopModeCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_DualAddressCmd) refers to stm32f0xx_i2c.o(.text.I2C_DualAddressCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_OwnAddress2Config) refers to stm32f0xx_i2c.o(.text.I2C_OwnAddress2Config) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GeneralCallCmd) refers to stm32f0xx_i2c.o(.text.I2C_GeneralCallCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SlaveByteControlCmd) refers to stm32f0xx_i2c.o(.text.I2C_SlaveByteControlCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SlaveAddressConfig) refers to stm32f0xx_i2c.o(.text.I2C_SlaveAddressConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_10BitAddressingModeCmd) refers to stm32f0xx_i2c.o(.text.I2C_10BitAddressingModeCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_AutoEndCmd) refers to stm32f0xx_i2c.o(.text.I2C_AutoEndCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ReloadCmd) refers to stm32f0xx_i2c.o(.text.I2C_ReloadCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_NumberOfBytesConfig) refers to stm32f0xx_i2c.o(.text.I2C_NumberOfBytesConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_MasterRequestConfig) refers to stm32f0xx_i2c.o(.text.I2C_MasterRequestConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GenerateSTART) refers to stm32f0xx_i2c.o(.text.I2C_GenerateSTART) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GenerateSTOP) refers to stm32f0xx_i2c.o(.text.I2C_GenerateSTOP) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_10BitAddressHeaderCmd) refers to stm32f0xx_i2c.o(.text.I2C_10BitAddressHeaderCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_AcknowledgeConfig) refers to stm32f0xx_i2c.o(.text.I2C_AcknowledgeConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetAddressMatched) refers to stm32f0xx_i2c.o(.text.I2C_GetAddressMatched) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetTransferDirection) refers to stm32f0xx_i2c.o(.text.I2C_GetTransferDirection) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_TransferHandling) refers to stm32f0xx_i2c.o(.text.I2C_TransferHandling) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SMBusAlertCmd) refers to stm32f0xx_i2c.o(.text.I2C_SMBusAlertCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ClockTimeoutCmd) refers to stm32f0xx_i2c.o(.text.I2C_ClockTimeoutCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ExtendedClockTimeoutCmd) refers to stm32f0xx_i2c.o(.text.I2C_ExtendedClockTimeoutCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_IdleClockTimeoutCmd) refers to stm32f0xx_i2c.o(.text.I2C_IdleClockTimeoutCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_TimeoutAConfig) refers to stm32f0xx_i2c.o(.text.I2C_TimeoutAConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_TimeoutBConfig) refers to stm32f0xx_i2c.o(.text.I2C_TimeoutBConfig) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_CalculatePEC) refers to stm32f0xx_i2c.o(.text.I2C_CalculatePEC) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_PECRequestCmd) refers to stm32f0xx_i2c.o(.text.I2C_PECRequestCmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetPEC) refers to stm32f0xx_i2c.o(.text.I2C_GetPEC) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ReadRegister) refers to stm32f0xx_i2c.o(.text.I2C_ReadRegister) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SendData) refers to stm32f0xx_i2c.o(.text.I2C_SendData) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ReceiveData) refers to stm32f0xx_i2c.o(.text.I2C_ReceiveData) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_DMACmd) refers to stm32f0xx_i2c.o(.text.I2C_DMACmd) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetFlagStatus) refers to stm32f0xx_i2c.o(.text.I2C_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ClearFlag) refers to stm32f0xx_i2c.o(.text.I2C_ClearFlag) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetITStatus) refers to stm32f0xx_i2c.o(.text.I2C_GetITStatus) for [Anonymous Symbol] + stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ClearITPendingBit) refers to stm32f0xx_i2c.o(.text.I2C_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_WriteAccessCmd) refers to stm32f0xx_iwdg.o(.text.IWDG_WriteAccessCmd) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_SetPrescaler) refers to stm32f0xx_iwdg.o(.text.IWDG_SetPrescaler) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_SetReload) refers to stm32f0xx_iwdg.o(.text.IWDG_SetReload) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_ReloadCounter) refers to stm32f0xx_iwdg.o(.text.IWDG_ReloadCounter) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_SetWindowValue) refers to stm32f0xx_iwdg.o(.text.IWDG_SetWindowValue) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_Enable) refers to stm32f0xx_iwdg.o(.text.IWDG_Enable) for [Anonymous Symbol] + stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_GetFlagStatus) refers to stm32f0xx_iwdg.o(.text.IWDG_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_misc.o(.ARM.exidx.text.NVIC_Init) refers to stm32f0xx_misc.o(.text.NVIC_Init) for [Anonymous Symbol] + stm32f0xx_misc.o(.ARM.exidx.text.NVIC_SystemLPConfig) refers to stm32f0xx_misc.o(.text.NVIC_SystemLPConfig) for [Anonymous Symbol] + stm32f0xx_misc.o(.ARM.exidx.text.SysTick_CLKSourceConfig) refers to stm32f0xx_misc.o(.text.SysTick_CLKSourceConfig) for [Anonymous Symbol] + stm32f0xx_pwr.o(.text.PWR_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_DeInit) refers to stm32f0xx_pwr.o(.text.PWR_DeInit) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_BackupAccessCmd) refers to stm32f0xx_pwr.o(.text.PWR_BackupAccessCmd) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_PVDLevelConfig) refers to stm32f0xx_pwr.o(.text.PWR_PVDLevelConfig) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_PVDCmd) refers to stm32f0xx_pwr.o(.text.PWR_PVDCmd) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_WakeUpPinCmd) refers to stm32f0xx_pwr.o(.text.PWR_WakeUpPinCmd) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_EnterSleepMode) refers to stm32f0xx_pwr.o(.text.PWR_EnterSleepMode) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_EnterSTOPMode) refers to stm32f0xx_pwr.o(.text.PWR_EnterSTOPMode) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_EnterSTANDBYMode) refers to stm32f0xx_pwr.o(.text.PWR_EnterSTANDBYMode) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_GetFlagStatus) refers to stm32f0xx_pwr.o(.text.PWR_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_pwr.o(.ARM.exidx.text.PWR_ClearFlag) refers to stm32f0xx_pwr.o(.text.PWR_ClearFlag) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_DeInit) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSEConfig) refers to stm32f0xx_rcc.o(.text.RCC_HSEConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_WaitForHSEStartUp) refers to stm32f0xx_rcc.o(.text.RCC_WaitForHSEStartUp) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetFlagStatus) refers to stm32f0xx_rcc.o(.text.RCC_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AdjustHSICalibrationValue) refers to stm32f0xx_rcc.o(.text.RCC_AdjustHSICalibrationValue) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSICmd) refers to stm32f0xx_rcc.o(.text.RCC_HSICmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AdjustHSI14CalibrationValue) refers to stm32f0xx_rcc.o(.text.RCC_AdjustHSI14CalibrationValue) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSI14Cmd) refers to stm32f0xx_rcc.o(.text.RCC_HSI14Cmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSI14ADCRequestCmd) refers to stm32f0xx_rcc.o(.text.RCC_HSI14ADCRequestCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_LSEConfig) refers to stm32f0xx_rcc.o(.text.RCC_LSEConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_LSEDriveConfig) refers to stm32f0xx_rcc.o(.text.RCC_LSEDriveConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_LSICmd) refers to stm32f0xx_rcc.o(.text.RCC_LSICmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PLLConfig) refers to stm32f0xx_rcc.o(.text.RCC_PLLConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PLLCmd) refers to stm32f0xx_rcc.o(.text.RCC_PLLCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSI48Cmd) refers to stm32f0xx_rcc.o(.text.RCC_HSI48Cmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PREDIV1Config) refers to stm32f0xx_rcc.o(.text.RCC_PREDIV1Config) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ClockSecuritySystemCmd) refers to stm32f0xx_rcc.o(.text.RCC_ClockSecuritySystemCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_MCOConfig) refers to stm32f0xx_rcc.o(.text.RCC_MCOConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_SYSCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_SYSCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetSYSCLKSource) refers to stm32f0xx_rcc.o(.text.RCC_GetSYSCLKSource) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_HCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_PCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ADCCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_ADCCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_CECCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_CECCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_I2CCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_I2CCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_USARTCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_USARTCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_USBCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_USBCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.text.RCC_GetClocksFreq) refers to uidiv_div0.o(.text) for __aeabi_uidiv + stm32f0xx_rcc.o(.text.RCC_GetClocksFreq) refers to stm32f0xx_rcc.o(.rodata.APBAHBPrescTable) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetClocksFreq) refers to stm32f0xx_rcc.o(.text.RCC_GetClocksFreq) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_RTCCLKConfig) refers to stm32f0xx_rcc.o(.text.RCC_RTCCLKConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_RTCCLKCmd) refers to stm32f0xx_rcc.o(.text.RCC_RTCCLKCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_BackupResetCmd) refers to stm32f0xx_rcc.o(.text.RCC_BackupResetCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AHBPeriphClockCmd) refers to stm32f0xx_rcc.o(.text.RCC_AHBPeriphClockCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB2PeriphClockCmd) refers to stm32f0xx_rcc.o(.text.RCC_APB2PeriphClockCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB1PeriphClockCmd) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphClockCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AHBPeriphResetCmd) refers to stm32f0xx_rcc.o(.text.RCC_AHBPeriphResetCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB2PeriphResetCmd) refers to stm32f0xx_rcc.o(.text.RCC_APB2PeriphResetCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB1PeriphResetCmd) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ITConfig) refers to stm32f0xx_rcc.o(.text.RCC_ITConfig) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ClearFlag) refers to stm32f0xx_rcc.o(.text.RCC_ClearFlag) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetITStatus) refers to stm32f0xx_rcc.o(.text.RCC_GetITStatus) for [Anonymous Symbol] + stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ClearITPendingBit) refers to stm32f0xx_rcc.o(.text.RCC_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_DeInit) refers to stm32f0xx_rtc.o(.text.RTC_DeInit) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_EnterInitMode) refers to stm32f0xx_rtc.o(.text.RTC_EnterInitMode) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WaitForSynchro) refers to stm32f0xx_rtc.o(.text.RTC_WaitForSynchro) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_Init) refers to stm32f0xx_rtc.o(.text.RTC_Init) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ExitInitMode) refers to stm32f0xx_rtc.o(.text.RTC_ExitInitMode) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_StructInit) refers to stm32f0xx_rtc.o(.text.RTC_StructInit) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WriteProtectionCmd) refers to stm32f0xx_rtc.o(.text.RTC_WriteProtectionCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_RefClockCmd) refers to stm32f0xx_rtc.o(.text.RTC_RefClockCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_BypassShadowCmd) refers to stm32f0xx_rtc.o(.text.RTC_BypassShadowCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetTime) refers to stm32f0xx_rtc.o(.text.RTC_SetTime) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TimeStructInit) refers to stm32f0xx_rtc.o(.text.RTC_TimeStructInit) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetTime) refers to stm32f0xx_rtc.o(.text.RTC_GetTime) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetSubSecond) refers to stm32f0xx_rtc.o(.text.RTC_GetSubSecond) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetDate) refers to stm32f0xx_rtc.o(.text.RTC_SetDate) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_DateStructInit) refers to stm32f0xx_rtc.o(.text.RTC_DateStructInit) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetDate) refers to stm32f0xx_rtc.o(.text.RTC_GetDate) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetAlarm) refers to stm32f0xx_rtc.o(.text.RTC_SetAlarm) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_AlarmStructInit) refers to stm32f0xx_rtc.o(.text.RTC_AlarmStructInit) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetAlarm) refers to stm32f0xx_rtc.o(.text.RTC_GetAlarm) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_AlarmCmd) refers to stm32f0xx_rtc.o(.text.RTC_AlarmCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_AlarmSubSecondConfig) refers to stm32f0xx_rtc.o(.text.RTC_AlarmSubSecondConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetAlarmSubSecond) refers to stm32f0xx_rtc.o(.text.RTC_GetAlarmSubSecond) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WakeUpClockConfig) refers to stm32f0xx_rtc.o(.text.RTC_WakeUpClockConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetWakeUpCounter) refers to stm32f0xx_rtc.o(.text.RTC_SetWakeUpCounter) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetWakeUpCounter) refers to stm32f0xx_rtc.o(.text.RTC_GetWakeUpCounter) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WakeUpCmd) refers to stm32f0xx_rtc.o(.text.RTC_WakeUpCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_DayLightSavingConfig) refers to stm32f0xx_rtc.o(.text.RTC_DayLightSavingConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetStoreOperation) refers to stm32f0xx_rtc.o(.text.RTC_GetStoreOperation) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_OutputConfig) refers to stm32f0xx_rtc.o(.text.RTC_OutputConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_CalibOutputCmd) refers to stm32f0xx_rtc.o(.text.RTC_CalibOutputCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_CalibOutputConfig) refers to stm32f0xx_rtc.o(.text.RTC_CalibOutputConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SmoothCalibConfig) refers to stm32f0xx_rtc.o(.text.RTC_SmoothCalibConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TimeStampCmd) refers to stm32f0xx_rtc.o(.text.RTC_TimeStampCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetTimeStamp) refers to stm32f0xx_rtc.o(.text.RTC_GetTimeStamp) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetTimeStampSubSecond) refers to stm32f0xx_rtc.o(.text.RTC_GetTimeStampSubSecond) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperTriggerConfig) refers to stm32f0xx_rtc.o(.text.RTC_TamperTriggerConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperCmd) refers to stm32f0xx_rtc.o(.text.RTC_TamperCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperFilterConfig) refers to stm32f0xx_rtc.o(.text.RTC_TamperFilterConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperSamplingFreqConfig) refers to stm32f0xx_rtc.o(.text.RTC_TamperSamplingFreqConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperPinsPrechargeDuration) refers to stm32f0xx_rtc.o(.text.RTC_TamperPinsPrechargeDuration) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TimeStampOnTamperDetectionCmd) refers to stm32f0xx_rtc.o(.text.RTC_TimeStampOnTamperDetectionCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperPullUpCmd) refers to stm32f0xx_rtc.o(.text.RTC_TamperPullUpCmd) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WriteBackupRegister) refers to stm32f0xx_rtc.o(.text.RTC_WriteBackupRegister) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ReadBackupRegister) refers to stm32f0xx_rtc.o(.text.RTC_ReadBackupRegister) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_OutputTypeConfig) refers to stm32f0xx_rtc.o(.text.RTC_OutputTypeConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SynchroShiftConfig) refers to stm32f0xx_rtc.o(.text.RTC_SynchroShiftConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ITConfig) refers to stm32f0xx_rtc.o(.text.RTC_ITConfig) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetFlagStatus) refers to stm32f0xx_rtc.o(.text.RTC_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ClearFlag) refers to stm32f0xx_rtc.o(.text.RTC_ClearFlag) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetITStatus) refers to stm32f0xx_rtc.o(.text.RTC_GetITStatus) for [Anonymous Symbol] + stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ClearITPendingBit) refers to stm32f0xx_rtc.o(.text.RTC_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_spi.o(.text.SPI_I2S_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd + stm32f0xx_spi.o(.text.SPI_I2S_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_DeInit) refers to stm32f0xx_spi.o(.text.SPI_I2S_DeInit) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_StructInit) refers to stm32f0xx_spi.o(.text.SPI_StructInit) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_Init) refers to stm32f0xx_spi.o(.text.SPI_Init) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.I2S_StructInit) refers to stm32f0xx_spi.o(.text.I2S_StructInit) for [Anonymous Symbol] + stm32f0xx_spi.o(.text.I2S_Init) refers to stm32f0xx_rcc.o(.text.RCC_GetClocksFreq) for RCC_GetClocksFreq + stm32f0xx_spi.o(.text.I2S_Init) refers to uidiv_div0.o(.text) for __aeabi_uidiv + stm32f0xx_spi.o(.ARM.exidx.text.I2S_Init) refers to stm32f0xx_spi.o(.text.I2S_Init) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_Cmd) refers to stm32f0xx_spi.o(.text.SPI_Cmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_TIModeCmd) refers to stm32f0xx_spi.o(.text.SPI_TIModeCmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.I2S_Cmd) refers to stm32f0xx_spi.o(.text.I2S_Cmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_DataSizeConfig) refers to stm32f0xx_spi.o(.text.SPI_DataSizeConfig) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_RxFIFOThresholdConfig) refers to stm32f0xx_spi.o(.text.SPI_RxFIFOThresholdConfig) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_BiDirectionalLineConfig) refers to stm32f0xx_spi.o(.text.SPI_BiDirectionalLineConfig) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_NSSInternalSoftwareConfig) refers to stm32f0xx_spi.o(.text.SPI_NSSInternalSoftwareConfig) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_SSOutputCmd) refers to stm32f0xx_spi.o(.text.SPI_SSOutputCmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_NSSPulseModeCmd) refers to stm32f0xx_spi.o(.text.SPI_NSSPulseModeCmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_SendData8) refers to stm32f0xx_spi.o(.text.SPI_SendData8) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_SendData16) refers to stm32f0xx_spi.o(.text.SPI_I2S_SendData16) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_ReceiveData8) refers to stm32f0xx_spi.o(.text.SPI_ReceiveData8) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_ReceiveData16) refers to stm32f0xx_spi.o(.text.SPI_I2S_ReceiveData16) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_CRCLengthConfig) refers to stm32f0xx_spi.o(.text.SPI_CRCLengthConfig) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_CalculateCRC) refers to stm32f0xx_spi.o(.text.SPI_CalculateCRC) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_TransmitCRC) refers to stm32f0xx_spi.o(.text.SPI_TransmitCRC) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetCRC) refers to stm32f0xx_spi.o(.text.SPI_GetCRC) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetCRCPolynomial) refers to stm32f0xx_spi.o(.text.SPI_GetCRCPolynomial) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_DMACmd) refers to stm32f0xx_spi.o(.text.SPI_I2S_DMACmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_LastDMATransferCmd) refers to stm32f0xx_spi.o(.text.SPI_LastDMATransferCmd) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_ITConfig) refers to stm32f0xx_spi.o(.text.SPI_I2S_ITConfig) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetTransmissionFIFOStatus) refers to stm32f0xx_spi.o(.text.SPI_GetTransmissionFIFOStatus) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetReceptionFIFOStatus) refers to stm32f0xx_spi.o(.text.SPI_GetReceptionFIFOStatus) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_GetFlagStatus) refers to stm32f0xx_spi.o(.text.SPI_I2S_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_ClearFlag) refers to stm32f0xx_spi.o(.text.SPI_I2S_ClearFlag) for [Anonymous Symbol] + stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_GetITStatus) refers to stm32f0xx_spi.o(.text.SPI_I2S_GetITStatus) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_DeInit) refers to stm32f0xx_syscfg.o(.text.SYSCFG_DeInit) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_MemoryRemapConfig) refers to stm32f0xx_syscfg.o(.text.SYSCFG_MemoryRemapConfig) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_DMAChannelRemapConfig) refers to stm32f0xx_syscfg.o(.text.SYSCFG_DMAChannelRemapConfig) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_I2CFastModePlusConfig) refers to stm32f0xx_syscfg.o(.text.SYSCFG_I2CFastModePlusConfig) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_IRDAEnvSelection) refers to stm32f0xx_syscfg.o(.text.SYSCFG_IRDAEnvSelection) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_EXTILineConfig) refers to stm32f0xx_syscfg.o(.text.SYSCFG_EXTILineConfig) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_GetPendingIT) refers to stm32f0xx_syscfg.o(.text.SYSCFG_GetPendingIT) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_BreakConfig) refers to stm32f0xx_syscfg.o(.text.SYSCFG_BreakConfig) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_GetFlagStatus) refers to stm32f0xx_syscfg.o(.text.SYSCFG_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_ClearFlag) refers to stm32f0xx_syscfg.o(.text.SYSCFG_ClearFlag) for [Anonymous Symbol] + stm32f0xx_tim.o(.text.TIM_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd + stm32f0xx_tim.o(.text.TIM_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_tim.o(.ARM.exidx.text.TIM_DeInit) refers to stm32f0xx_tim.o(.text.TIM_DeInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_TimeBaseInit) refers to stm32f0xx_tim.o(.text.TIM_TimeBaseInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_TimeBaseStructInit) refers to stm32f0xx_tim.o(.text.TIM_TimeBaseStructInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_PrescalerConfig) refers to stm32f0xx_tim.o(.text.TIM_PrescalerConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_CounterModeConfig) refers to stm32f0xx_tim.o(.text.TIM_CounterModeConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCounter) refers to stm32f0xx_tim.o(.text.TIM_SetCounter) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetAutoreload) refers to stm32f0xx_tim.o(.text.TIM_SetAutoreload) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCounter) refers to stm32f0xx_tim.o(.text.TIM_GetCounter) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetPrescaler) refers to stm32f0xx_tim.o(.text.TIM_GetPrescaler) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_UpdateDisableConfig) refers to stm32f0xx_tim.o(.text.TIM_UpdateDisableConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_UpdateRequestConfig) refers to stm32f0xx_tim.o(.text.TIM_UpdateRequestConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ARRPreloadConfig) refers to stm32f0xx_tim.o(.text.TIM_ARRPreloadConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOnePulseMode) refers to stm32f0xx_tim.o(.text.TIM_SelectOnePulseMode) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetClockDivision) refers to stm32f0xx_tim.o(.text.TIM_SetClockDivision) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_Cmd) refers to stm32f0xx_tim.o(.text.TIM_Cmd) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_BDTRConfig) refers to stm32f0xx_tim.o(.text.TIM_BDTRConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_BDTRStructInit) refers to stm32f0xx_tim.o(.text.TIM_BDTRStructInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_CtrlPWMOutputs) refers to stm32f0xx_tim.o(.text.TIM_CtrlPWMOutputs) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1Init) refers to stm32f0xx_tim.o(.text.TIM_OC1Init) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2Init) refers to stm32f0xx_tim.o(.text.TIM_OC2Init) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3Init) refers to stm32f0xx_tim.o(.text.TIM_OC3Init) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4Init) refers to stm32f0xx_tim.o(.text.TIM_OC4Init) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OCStructInit) refers to stm32f0xx_tim.o(.text.TIM_OCStructInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOCxM) refers to stm32f0xx_tim.o(.text.TIM_SelectOCxM) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare1) refers to stm32f0xx_tim.o(.text.TIM_SetCompare1) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare2) refers to stm32f0xx_tim.o(.text.TIM_SetCompare2) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare3) refers to stm32f0xx_tim.o(.text.TIM_SetCompare3) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare4) refers to stm32f0xx_tim.o(.text.TIM_SetCompare4) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC1Config) refers to stm32f0xx_tim.o(.text.TIM_ForcedOC1Config) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC2Config) refers to stm32f0xx_tim.o(.text.TIM_ForcedOC2Config) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC3Config) refers to stm32f0xx_tim.o(.text.TIM_ForcedOC3Config) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC4Config) refers to stm32f0xx_tim.o(.text.TIM_ForcedOC4Config) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_CCPreloadControl) refers to stm32f0xx_tim.o(.text.TIM_CCPreloadControl) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1PreloadConfig) refers to stm32f0xx_tim.o(.text.TIM_OC1PreloadConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2PreloadConfig) refers to stm32f0xx_tim.o(.text.TIM_OC2PreloadConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3PreloadConfig) refers to stm32f0xx_tim.o(.text.TIM_OC3PreloadConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4PreloadConfig) refers to stm32f0xx_tim.o(.text.TIM_OC4PreloadConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1FastConfig) refers to stm32f0xx_tim.o(.text.TIM_OC1FastConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2FastConfig) refers to stm32f0xx_tim.o(.text.TIM_OC2FastConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3FastConfig) refers to stm32f0xx_tim.o(.text.TIM_OC3FastConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4FastConfig) refers to stm32f0xx_tim.o(.text.TIM_OC4FastConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC1Ref) refers to stm32f0xx_tim.o(.text.TIM_ClearOC1Ref) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC2Ref) refers to stm32f0xx_tim.o(.text.TIM_ClearOC2Ref) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC3Ref) refers to stm32f0xx_tim.o(.text.TIM_ClearOC3Ref) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC4Ref) refers to stm32f0xx_tim.o(.text.TIM_ClearOC4Ref) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1PolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC1PolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1NPolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC1NPolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2PolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC2PolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2NPolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC2NPolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3PolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC3PolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3NPolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC3NPolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4PolarityConfig) refers to stm32f0xx_tim.o(.text.TIM_OC4PolarityConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOCREFClear) refers to stm32f0xx_tim.o(.text.TIM_SelectOCREFClear) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_CCxCmd) refers to stm32f0xx_tim.o(.text.TIM_CCxCmd) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_CCxNCmd) refers to stm32f0xx_tim.o(.text.TIM_CCxNCmd) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectCOM) refers to stm32f0xx_tim.o(.text.TIM_SelectCOM) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ICInit) refers to stm32f0xx_tim.o(.text.TIM_ICInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC1Prescaler) refers to stm32f0xx_tim.o(.text.TIM_SetIC1Prescaler) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC2Prescaler) refers to stm32f0xx_tim.o(.text.TIM_SetIC2Prescaler) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC3Prescaler) refers to stm32f0xx_tim.o(.text.TIM_SetIC3Prescaler) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC4Prescaler) refers to stm32f0xx_tim.o(.text.TIM_SetIC4Prescaler) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ICStructInit) refers to stm32f0xx_tim.o(.text.TIM_ICStructInit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_PWMIConfig) refers to stm32f0xx_tim.o(.text.TIM_PWMIConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture1) refers to stm32f0xx_tim.o(.text.TIM_GetCapture1) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture2) refers to stm32f0xx_tim.o(.text.TIM_GetCapture2) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture3) refers to stm32f0xx_tim.o(.text.TIM_GetCapture3) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture4) refers to stm32f0xx_tim.o(.text.TIM_GetCapture4) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ITConfig) refers to stm32f0xx_tim.o(.text.TIM_ITConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GenerateEvent) refers to stm32f0xx_tim.o(.text.TIM_GenerateEvent) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetFlagStatus) refers to stm32f0xx_tim.o(.text.TIM_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearFlag) refers to stm32f0xx_tim.o(.text.TIM_ClearFlag) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetITStatus) refers to stm32f0xx_tim.o(.text.TIM_GetITStatus) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearITPendingBit) refers to stm32f0xx_tim.o(.text.TIM_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_DMAConfig) refers to stm32f0xx_tim.o(.text.TIM_DMAConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_DMACmd) refers to stm32f0xx_tim.o(.text.TIM_DMACmd) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectCCDMA) refers to stm32f0xx_tim.o(.text.TIM_SelectCCDMA) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_InternalClockConfig) refers to stm32f0xx_tim.o(.text.TIM_InternalClockConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ITRxExternalClockConfig) refers to stm32f0xx_tim.o(.text.TIM_ITRxExternalClockConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectInputTrigger) refers to stm32f0xx_tim.o(.text.TIM_SelectInputTrigger) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_TIxExternalClockConfig) refers to stm32f0xx_tim.o(.text.TIM_TIxExternalClockConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ETRClockMode1Config) refers to stm32f0xx_tim.o(.text.TIM_ETRClockMode1Config) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ETRConfig) refers to stm32f0xx_tim.o(.text.TIM_ETRConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_ETRClockMode2Config) refers to stm32f0xx_tim.o(.text.TIM_ETRClockMode2Config) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOutputTrigger) refers to stm32f0xx_tim.o(.text.TIM_SelectOutputTrigger) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectSlaveMode) refers to stm32f0xx_tim.o(.text.TIM_SelectSlaveMode) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectMasterSlaveMode) refers to stm32f0xx_tim.o(.text.TIM_SelectMasterSlaveMode) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_EncoderInterfaceConfig) refers to stm32f0xx_tim.o(.text.TIM_EncoderInterfaceConfig) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectHallSensor) refers to stm32f0xx_tim.o(.text.TIM_SelectHallSensor) for [Anonymous Symbol] + stm32f0xx_tim.o(.ARM.exidx.text.TIM_RemapConfig) refers to stm32f0xx_tim.o(.text.TIM_RemapConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.text.USART_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd + stm32f0xx_usart.o(.text.USART_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_usart.o(.ARM.exidx.text.USART_DeInit) refers to stm32f0xx_usart.o(.text.USART_DeInit) for [Anonymous Symbol] + stm32f0xx_usart.o(.text.USART_Init) refers to stm32f0xx_rcc.o(.text.RCC_GetClocksFreq) for RCC_GetClocksFreq + stm32f0xx_usart.o(.text.USART_Init) refers to uidiv_div0.o(.text) for __aeabi_uidiv + stm32f0xx_usart.o(.ARM.exidx.text.USART_Init) refers to stm32f0xx_usart.o(.text.USART_Init) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_StructInit) refers to stm32f0xx_usart.o(.text.USART_StructInit) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ClockInit) refers to stm32f0xx_usart.o(.text.USART_ClockInit) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ClockStructInit) refers to stm32f0xx_usart.o(.text.USART_ClockStructInit) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_Cmd) refers to stm32f0xx_usart.o(.text.USART_Cmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_DirectionModeCmd) refers to stm32f0xx_usart.o(.text.USART_DirectionModeCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_OverSampling8Cmd) refers to stm32f0xx_usart.o(.text.USART_OverSampling8Cmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_OneBitMethodCmd) refers to stm32f0xx_usart.o(.text.USART_OneBitMethodCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_MSBFirstCmd) refers to stm32f0xx_usart.o(.text.USART_MSBFirstCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_DataInvCmd) refers to stm32f0xx_usart.o(.text.USART_DataInvCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_InvPinCmd) refers to stm32f0xx_usart.o(.text.USART_InvPinCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SWAPPinCmd) refers to stm32f0xx_usart.o(.text.USART_SWAPPinCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ReceiverTimeOutCmd) refers to stm32f0xx_usart.o(.text.USART_ReceiverTimeOutCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetReceiverTimeOut) refers to stm32f0xx_usart.o(.text.USART_SetReceiverTimeOut) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetPrescaler) refers to stm32f0xx_usart.o(.text.USART_SetPrescaler) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_STOPModeCmd) refers to stm32f0xx_usart.o(.text.USART_STOPModeCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_StopModeWakeUpSourceConfig) refers to stm32f0xx_usart.o(.text.USART_StopModeWakeUpSourceConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_AutoBaudRateCmd) refers to stm32f0xx_usart.o(.text.USART_AutoBaudRateCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_AutoBaudRateConfig) refers to stm32f0xx_usart.o(.text.USART_AutoBaudRateConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SendData) refers to stm32f0xx_usart.o(.text.USART_SendData) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ReceiveData) refers to stm32f0xx_usart.o(.text.USART_ReceiveData) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetAddress) refers to stm32f0xx_usart.o(.text.USART_SetAddress) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_MuteModeCmd) refers to stm32f0xx_usart.o(.text.USART_MuteModeCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_MuteModeWakeUpConfig) refers to stm32f0xx_usart.o(.text.USART_MuteModeWakeUpConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_AddressDetectionConfig) refers to stm32f0xx_usart.o(.text.USART_AddressDetectionConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_LINBreakDetectLengthConfig) refers to stm32f0xx_usart.o(.text.USART_LINBreakDetectLengthConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_LINCmd) refers to stm32f0xx_usart.o(.text.USART_LINCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_HalfDuplexCmd) refers to stm32f0xx_usart.o(.text.USART_HalfDuplexCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetGuardTime) refers to stm32f0xx_usart.o(.text.USART_SetGuardTime) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SmartCardCmd) refers to stm32f0xx_usart.o(.text.USART_SmartCardCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SmartCardNACKCmd) refers to stm32f0xx_usart.o(.text.USART_SmartCardNACKCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetAutoRetryCount) refers to stm32f0xx_usart.o(.text.USART_SetAutoRetryCount) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetBlockLength) refers to stm32f0xx_usart.o(.text.USART_SetBlockLength) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_IrDAConfig) refers to stm32f0xx_usart.o(.text.USART_IrDAConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_IrDACmd) refers to stm32f0xx_usart.o(.text.USART_IrDACmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_DECmd) refers to stm32f0xx_usart.o(.text.USART_DECmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_DEPolarityConfig) refers to stm32f0xx_usart.o(.text.USART_DEPolarityConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetDEAssertionTime) refers to stm32f0xx_usart.o(.text.USART_SetDEAssertionTime) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_SetDEDeassertionTime) refers to stm32f0xx_usart.o(.text.USART_SetDEDeassertionTime) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_DMACmd) refers to stm32f0xx_usart.o(.text.USART_DMACmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_DMAReceptionErrorConfig) refers to stm32f0xx_usart.o(.text.USART_DMAReceptionErrorConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ITConfig) refers to stm32f0xx_usart.o(.text.USART_ITConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_RequestCmd) refers to stm32f0xx_usart.o(.text.USART_RequestCmd) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_OverrunDetectionConfig) refers to stm32f0xx_usart.o(.text.USART_OverrunDetectionConfig) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_GetFlagStatus) refers to stm32f0xx_usart.o(.text.USART_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ClearFlag) refers to stm32f0xx_usart.o(.text.USART_ClearFlag) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_GetITStatus) refers to stm32f0xx_usart.o(.text.USART_GetITStatus) for [Anonymous Symbol] + stm32f0xx_usart.o(.ARM.exidx.text.USART_ClearITPendingBit) refers to stm32f0xx_usart.o(.text.USART_ClearITPendingBit) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.text.WWDG_DeInit) refers to stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_DeInit) refers to stm32f0xx_wwdg.o(.text.WWDG_DeInit) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_SetPrescaler) refers to stm32f0xx_wwdg.o(.text.WWDG_SetPrescaler) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_SetWindowValue) refers to stm32f0xx_wwdg.o(.text.WWDG_SetWindowValue) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_EnableIT) refers to stm32f0xx_wwdg.o(.text.WWDG_EnableIT) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_SetCounter) refers to stm32f0xx_wwdg.o(.text.WWDG_SetCounter) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_Enable) refers to stm32f0xx_wwdg.o(.text.WWDG_Enable) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_GetFlagStatus) refers to stm32f0xx_wwdg.o(.text.WWDG_GetFlagStatus) for [Anonymous Symbol] + stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_ClearFlag) refers to stm32f0xx_wwdg.o(.text.WWDG_ClearFlag) for [Anonymous Symbol] + main.o(.text.main) refers to stm32f0xx_rcc.o(.text.RCC_AHBPeriphClockCmd) for RCC_AHBPeriphClockCmd + main.o(.text.main) refers to stm32f0xx_gpio.o(.text.GPIO_Init) for GPIO_Init + main.o(.text.main) refers to main.o(.bss.GPIO_InitStructure) for GPIO_InitStructure + main.o(.ARM.exidx.text.main) refers to main.o(.text.main) for [Anonymous Symbol] + stm32f0xx_it.o(.ARM.exidx.text.NMI_Handler) refers to stm32f0xx_it.o(.text.NMI_Handler) for [Anonymous Symbol] + stm32f0xx_it.o(.ARM.exidx.text.HardFault_Handler) refers to stm32f0xx_it.o(.text.HardFault_Handler) for [Anonymous Symbol] + stm32f0xx_it.o(.ARM.exidx.text.SVC_Handler) refers to stm32f0xx_it.o(.text.SVC_Handler) for [Anonymous Symbol] + stm32f0xx_it.o(.ARM.exidx.text.PendSV_Handler) refers to stm32f0xx_it.o(.text.PendSV_Handler) for [Anonymous Symbol] + stm32f0xx_it.o(.ARM.exidx.text.SysTick_Handler) refers to stm32f0xx_it.o(.text.SysTick_Handler) for [Anonymous Symbol] + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry10a.o(.ARM.Collect$$$$0000000D) for __rt_final_cpp + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry11a.o(.ARM.Collect$$$$0000000F) for __rt_final_exit + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry7b.o(.ARM.Collect$$$$00000008) for _main_clock + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry8b.o(.ARM.Collect$$$$0000000A) for _main_cpp_init + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry9a.o(.ARM.Collect$$$$0000000B) for _main_init + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry5.o(.ARM.Collect$$$$00000004) for _main_scatterload + entry.o(.ARM.Collect$$$$00000000) refers (Special) to entry2.o(.ARM.Collect$$$$00000001) for _main_stk + entry2.o(.ARM.Collect$$$$00000001) refers to entry2.o(.ARM.Collect$$$$00002712) for __lit__00000000 + entry2.o(.ARM.Collect$$$$00002712) refers to startup_stm32f072.o(STACK) for __initial_sp + entry2.o(__vectab_stack_and_reset_area) refers to startup_stm32f072.o(STACK) for __initial_sp + entry2.o(__vectab_stack_and_reset_area) refers to entry.o(.ARM.Collect$$$$00000000) for __main + entry5.o(.ARM.Collect$$$$00000004) refers to init.o(.text) for __scatterload + entry9a.o(.ARM.Collect$$$$0000000B) refers to main.o(.text.main) for main + entry9b.o(.ARM.Collect$$$$0000000C) refers to main.o(.text.main) for main + idiv_div0.o(.text) refers to uidiv_div0.o(.text) for __aeabi_uidivmod + init.o(.text) refers to entry5.o(.ARM.Collect$$$$00000004) for __main_after_scatterload + + +============================================================================== + +Removing Unused input sections from the image. + + Removing startup_stm32f072.o(HEAP), (512 bytes). + Removing system_stm32f0xx.o(.text), (0 bytes). + Removing system_stm32f0xx.o(.ARM.exidx.text.SystemInit), (8 bytes). + Removing system_stm32f0xx.o(.text.SystemCoreClockUpdate), (96 bytes). + Removing system_stm32f0xx.o(.ARM.exidx.text.SystemCoreClockUpdate), (8 bytes). + Removing system_stm32f0xx.o(.data.SystemCoreClock), (4 bytes). + Removing system_stm32f0xx.o(.rodata.AHBPrescTable), (16 bytes). + Removing stm32f0xx_adc.o(.text), (0 bytes). + Removing stm32f0xx_adc.o(.text.ADC_DeInit), (36 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_DeInit), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_Init), (40 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_Init), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_StructInit), (16 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_StructInit), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_Cmd), (18 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_Cmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_ClockModeConfig), (4 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_ClockModeConfig), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_JitterCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_JitterCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_AutoPowerOffCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_AutoPowerOffCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_WaitModeCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_WaitModeCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_AnalogWatchdogCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_AnalogWatchdogThresholdsConfig), (8 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogThresholdsConfig), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_AnalogWatchdogSingleChannelConfig), (14 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogSingleChannelConfig), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_AnalogWatchdogSingleChannelCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_AnalogWatchdogSingleChannelCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_TempSensorCmd), (28 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_TempSensorCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_VrefintCmd), (28 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_VrefintCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_VbatCmd), (28 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_VbatCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_ChannelConfig), (10 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_ChannelConfig), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_ContinuousModeCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_ContinuousModeCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_DiscModeCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_DiscModeCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_OverrunModeCmd), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_OverrunModeCmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_GetCalibrationFactor), (60 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetCalibrationFactor), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_StopOfConversion), (10 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_StopOfConversion), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_StartOfConversion), (10 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_StartOfConversion), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_GetConversionValue), (6 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetConversionValue), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_DMACmd), (16 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_DMACmd), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_DMARequestModeConfig), (16 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_DMARequestModeConfig), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_ITConfig), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_ITConfig), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_GetFlagStatus), (24 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetFlagStatus), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_ClearFlag), (4 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_ClearFlag), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_GetITStatus), (20 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_GetITStatus), (8 bytes). + Removing stm32f0xx_adc.o(.text.ADC_ClearITPendingBit), (4 bytes). + Removing stm32f0xx_adc.o(.ARM.exidx.text.ADC_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_can.o(.text), (0 bytes). + Removing stm32f0xx_can.o(.text.CAN_DeInit), (22 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_DeInit), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_Init), (264 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_Init), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_FilterInit), (168 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_FilterInit), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_StructInit), (24 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_StructInit), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_SlaveStartBank), (44 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_SlaveStartBank), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_DBGFreeze), (20 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_DBGFreeze), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_TTComModeCmd), (76 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_TTComModeCmd), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_Transmit), (166 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_Transmit), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_TransmitStatus), (136 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_TransmitStatus), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_CancelTransmit), (32 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_CancelTransmit), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_Receive), (142 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_Receive), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_FIFORelease), (20 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_FIFORelease), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_MessagePending), (26 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_MessagePending), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_OperatingModeRequest), (196 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_OperatingModeRequest), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_Sleep), (26 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_Sleep), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_WakeUp), (56 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_WakeUp), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_GetLastErrorCode), (8 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_GetLastErrorCode), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_GetReceiveErrorCounter), (6 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_GetReceiveErrorCounter), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_GetLSBTransmitErrorCounter), (8 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_GetLSBTransmitErrorCounter), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_ITConfig), (20 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_ITConfig), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_GetFlagStatus), (56 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_GetFlagStatus), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_ClearFlag), (52 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_ClearFlag), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_GetITStatus), (264 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_GetITStatus), (8 bytes). + Removing stm32f0xx_can.o(.text.CAN_ClearITPendingBit), (284 bytes). + Removing stm32f0xx_can.o(.ARM.exidx.text.CAN_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_cec.o(.text), (0 bytes). + Removing stm32f0xx_cec.o(.text.CEC_DeInit), (22 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_DeInit), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_Init), (44 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_Init), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_StructInit), (18 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_StructInit), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_Cmd), (24 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_Cmd), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_ListenModeCmd), (28 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_ListenModeCmd), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_OwnAddressConfig), (20 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_OwnAddressConfig), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_OwnAddressClear), (12 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_OwnAddressClear), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_SendData), (12 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_SendData), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_ReceiveData), (12 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_ReceiveData), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_StartOfMessage), (16 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_StartOfMessage), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_EndOfMessage), (16 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_EndOfMessage), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_ITConfig), (36 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_ITConfig), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_GetFlagStatus), (16 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_GetFlagStatus), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_ClearFlag), (12 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_ClearFlag), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_GetITStatus), (28 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_GetITStatus), (8 bytes). + Removing stm32f0xx_cec.o(.text.CEC_ClearITPendingBit), (12 bytes). + Removing stm32f0xx_cec.o(.ARM.exidx.text.CEC_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_comp.o(.text), (0 bytes). + Removing stm32f0xx_comp.o(.text.COMP_DeInit), (12 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_DeInit), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_Init), (40 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_Init), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_StructInit), (16 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_StructInit), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_Cmd), (32 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_Cmd), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_SwitchCmd), (24 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_SwitchCmd), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_GetOutputLevel), (20 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_GetOutputLevel), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_WindowCmd), (28 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_WindowCmd), (8 bytes). + Removing stm32f0xx_comp.o(.text.COMP_LockConfig), (20 bytes). + Removing stm32f0xx_comp.o(.ARM.exidx.text.COMP_LockConfig), (8 bytes). + Removing stm32f0xx_crc.o(.text), (0 bytes). + Removing stm32f0xx_crc.o(.text.CRC_DeInit), (32 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_DeInit), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_ResetDR), (16 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_ResetDR), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_PolynomialSizeSelect), (20 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_PolynomialSizeSelect), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_ReverseInputDataSelect), (20 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_ReverseInputDataSelect), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_ReverseOutputDataCmd), (24 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_ReverseOutputDataCmd), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_SetInitRegister), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_SetInitRegister), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_SetPolynomial), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_SetPolynomial), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_CalcCRC), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcCRC), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_CalcCRC16bits), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcCRC16bits), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_CalcCRC8bits), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcCRC8bits), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_CalcBlockCRC), (92 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_CalcBlockCRC), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_GetCRC), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_GetCRC), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_SetIDRegister), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_SetIDRegister), (8 bytes). + Removing stm32f0xx_crc.o(.text.CRC_GetIDRegister), (12 bytes). + Removing stm32f0xx_crc.o(.ARM.exidx.text.CRC_GetIDRegister), (8 bytes). + Removing stm32f0xx_crs.o(.text), (0 bytes). + Removing stm32f0xx_crs.o(.text.CRS_DeInit), (22 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_DeInit), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_AdjustHSI48CalibrationValue), (28 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_AdjustHSI48CalibrationValue), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_FrequencyErrorCounterCmd), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_FrequencyErrorCounterCmd), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_AutomaticCalibrationCmd), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_AutomaticCalibrationCmd), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_SoftwareSynchronizationGenerate), (16 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_SoftwareSynchronizationGenerate), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_FrequencyErrorCounterReload), (28 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_FrequencyErrorCounterReload), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_FrequencyErrorLimitConfig), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_FrequencyErrorLimitConfig), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_SynchronizationPrescalerConfig), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_SynchronizationPrescalerConfig), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_SynchronizationSourceConfig), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_SynchronizationSourceConfig), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_SynchronizationPolarityConfig), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_SynchronizationPolarityConfig), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_GetReloadValue), (12 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetReloadValue), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_GetHSI48CalibrationValue), (16 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetHSI48CalibrationValue), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_GetFrequencyErrorValue), (20 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetFrequencyErrorValue), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_GetFrequencyErrorDirection), (16 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetFrequencyErrorDirection), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_ITConfig), (28 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_ITConfig), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_GetFlagStatus), (16 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetFlagStatus), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_ClearFlag), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_ClearFlag), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_GetITStatus), (16 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_GetITStatus), (8 bytes). + Removing stm32f0xx_crs.o(.text.CRS_ClearITPendingBit), (24 bytes). + Removing stm32f0xx_crs.o(.ARM.exidx.text.CRS_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_dac.o(.text), (0 bytes). + Removing stm32f0xx_dac.o(.text.DAC_DeInit), (22 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_DeInit), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_Init), (40 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_Init), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_StructInit), (12 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_StructInit), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_Cmd), (32 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_Cmd), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_SoftwareTriggerCmd), (32 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_SoftwareTriggerCmd), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_DualSoftwareTriggerCmd), (28 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_DualSoftwareTriggerCmd), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_WaveGenerationCmd), (28 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_WaveGenerationCmd), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_SetChannel1Data), (32 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_SetChannel1Data), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_SetChannel2Data), (32 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_SetChannel2Data), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_SetDualChannelData), (24 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_SetDualChannelData), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_GetDataOutputValue), (36 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_GetDataOutputValue), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_DMACmd), (32 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_DMACmd), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_ITConfig), (28 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_ITConfig), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_GetFlagStatus), (20 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_GetFlagStatus), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_ClearFlag), (12 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_ClearFlag), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_GetITStatus), (28 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_GetITStatus), (8 bytes). + Removing stm32f0xx_dac.o(.text.DAC_ClearITPendingBit), (12 bytes). + Removing stm32f0xx_dac.o(.ARM.exidx.text.DAC_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_dbgmcu.o(.text), (0 bytes). + Removing stm32f0xx_dbgmcu.o(.text.DBGMCU_GetREVID), (12 bytes). + Removing stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_GetREVID), (8 bytes). + Removing stm32f0xx_dbgmcu.o(.text.DBGMCU_GetDEVID), (20 bytes). + Removing stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_GetDEVID), (8 bytes). + Removing stm32f0xx_dbgmcu.o(.text.DBGMCU_Config), (28 bytes). + Removing stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_Config), (8 bytes). + Removing stm32f0xx_dbgmcu.o(.text.DBGMCU_APB1PeriphConfig), (28 bytes). + Removing stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_APB1PeriphConfig), (8 bytes). + Removing stm32f0xx_dbgmcu.o(.text.DBGMCU_APB2PeriphConfig), (28 bytes). + Removing stm32f0xx_dbgmcu.o(.ARM.exidx.text.DBGMCU_APB2PeriphConfig), (8 bytes). + Removing stm32f0xx_dma.o(.text), (0 bytes). + Removing stm32f0xx_dma.o(.text.DMA_DeInit), (248 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_DeInit), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_Init), (60 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_Init), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_StructInit), (10 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_StructInit), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_Cmd), (28 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_Cmd), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_RemapConfig), (30 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_RemapConfig), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_SetCurrDataCounter), (4 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_SetCurrDataCounter), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_GetCurrDataCounter), (6 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_GetCurrDataCounter), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_ITConfig), (20 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_ITConfig), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_GetFlagStatus), (32 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_GetFlagStatus), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_ClearFlag), (24 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_ClearFlag), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_GetITStatus), (32 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_GetITStatus), (8 bytes). + Removing stm32f0xx_dma.o(.text.DMA_ClearITPendingBit), (24 bytes). + Removing stm32f0xx_dma.o(.ARM.exidx.text.DMA_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_exti.o(.text), (0 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_DeInit), (32 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_DeInit), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_Init), (96 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_Init), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_StructInit), (14 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_StructInit), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_GenerateSWInterrupt), (16 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_GenerateSWInterrupt), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_GetFlagStatus), (16 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_GetFlagStatus), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_ClearFlag), (12 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_ClearFlag), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_GetITStatus), (16 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_GetITStatus), (8 bytes). + Removing stm32f0xx_exti.o(.text.EXTI_ClearITPendingBit), (12 bytes). + Removing stm32f0xx_exti.o(.ARM.exidx.text.EXTI_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_flash.o(.text), (0 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_SetLatency), (20 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_SetLatency), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_PrefetchBufferCmd), (24 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_PrefetchBufferCmd), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_GetPrefetchBufferStatus), (16 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_GetPrefetchBufferStatus), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_Unlock), (32 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_Unlock), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_Lock), (16 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_Lock), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_ErasePage), (632 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ErasePage), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_WaitForLastOperation), (156 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_WaitForLastOperation), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_EraseAllPages), (628 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_EraseAllPages), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_ProgramWord), (896 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ProgramWord), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_ProgramHalfWord), (640 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ProgramHalfWord), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_Unlock), (32 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Unlock), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_Lock), (20 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Lock), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_Launch), (20 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Launch), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_Erase), (952 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_Erase), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_GetRDP), (20 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_GetRDP), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_EnableWRP), (1678 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_EnableWRP), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_RDPConfig), (940 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_RDPConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_UserConfig), (660 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_UserConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_BOOTConfig), (652 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_BOOTConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_BOOT0Config), (652 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_BOOT0Config), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_BOOT0SWConfig), (652 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_BOOT0SWConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_VDDAConfig), (652 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_VDDAConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_SRAMParityConfig), (652 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_SRAMParityConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_WriteUser), (648 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_WriteUser), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_ProgramData), (644 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_ProgramData), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_GetUser), (16 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_GetUser), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_OB_GetWRP), (12 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_OB_GetWRP), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_ITConfig), (28 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ITConfig), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_GetFlagStatus), (16 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_GetFlagStatus), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_ClearFlag), (12 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_ClearFlag), (8 bytes). + Removing stm32f0xx_flash.o(.text.FLASH_GetStatus), (40 bytes). + Removing stm32f0xx_flash.o(.ARM.exidx.text.FLASH_GetStatus), (8 bytes). + Removing stm32f0xx_gpio.o(.text), (0 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_DeInit), (64 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_DeInit), (8 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_Init), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_StructInit), (16 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_StructInit), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_PinLockConfig), (36 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_PinLockConfig), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_ReadInputDataBit), (10 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadInputDataBit), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_ReadInputData), (4 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadInputData), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_ReadOutputDataBit), (10 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadOutputDataBit), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_ReadOutputData), (4 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ReadOutputData), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_SetBits), (4 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_SetBits), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_ResetBits), (4 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_ResetBits), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_WriteBit), (12 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_WriteBit), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_Write), (4 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_Write), (8 bytes). + Removing stm32f0xx_gpio.o(.text.GPIO_PinAFConfig), (32 bytes). + Removing stm32f0xx_gpio.o(.ARM.exidx.text.GPIO_PinAFConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text), (0 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_DeInit), (36 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_DeInit), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_Init), (96 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_Init), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_StructInit), (22 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_StructInit), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_Cmd), (16 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_Cmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_SoftwareResetCmd), (18 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SoftwareResetCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ITConfig), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ITConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_StretchClockCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_StretchClockCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_StopModeCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_StopModeCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_DualAddressCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_DualAddressCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_OwnAddress2Config), (28 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_OwnAddress2Config), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GeneralCallCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GeneralCallCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_SlaveByteControlCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SlaveByteControlCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_SlaveAddressConfig), (24 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SlaveAddressConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_10BitAddressingModeCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_10BitAddressingModeCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_AutoEndCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_AutoEndCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ReloadCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ReloadCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_NumberOfBytesConfig), (16 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_NumberOfBytesConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_MasterRequestConfig), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_MasterRequestConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GenerateSTART), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GenerateSTART), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GenerateSTOP), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GenerateSTOP), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_10BitAddressHeaderCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_10BitAddressHeaderCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_AcknowledgeConfig), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_AcknowledgeConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GetAddressMatched), (10 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetAddressMatched), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GetTransferDirection), (12 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetTransferDirection), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_TransferHandling), (36 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_TransferHandling), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_SMBusAlertCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SMBusAlertCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ClockTimeoutCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ClockTimeoutCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ExtendedClockTimeoutCmd), (24 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ExtendedClockTimeoutCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_IdleClockTimeoutCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_IdleClockTimeoutCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_TimeoutAConfig), (24 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_TimeoutAConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_TimeoutBConfig), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_TimeoutBConfig), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_CalculatePEC), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_CalculatePEC), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_PECRequestCmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_PECRequestCmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GetPEC), (6 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetPEC), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ReadRegister), (22 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ReadRegister), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_SendData), (4 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_SendData), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ReceiveData), (6 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ReceiveData), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_DMACmd), (20 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_DMACmd), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GetFlagStatus), (10 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetFlagStatus), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ClearFlag), (4 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ClearFlag), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_GetITStatus), (48 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_GetITStatus), (8 bytes). + Removing stm32f0xx_i2c.o(.text.I2C_ClearITPendingBit), (4 bytes). + Removing stm32f0xx_i2c.o(.ARM.exidx.text.I2C_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_iwdg.o(.text), (0 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_WriteAccessCmd), (12 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_WriteAccessCmd), (8 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_SetPrescaler), (12 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_SetPrescaler), (8 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_SetReload), (12 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_SetReload), (8 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_ReloadCounter), (16 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_ReloadCounter), (8 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_SetWindowValue), (12 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_SetWindowValue), (8 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_Enable), (16 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_Enable), (8 bytes). + Removing stm32f0xx_iwdg.o(.text.IWDG_GetFlagStatus), (16 bytes). + Removing stm32f0xx_iwdg.o(.ARM.exidx.text.IWDG_GetFlagStatus), (8 bytes). + Removing stm32f0xx_misc.o(.text), (0 bytes). + Removing stm32f0xx_misc.o(.text.NVIC_Init), (80 bytes). + Removing stm32f0xx_misc.o(.ARM.exidx.text.NVIC_Init), (8 bytes). + Removing stm32f0xx_misc.o(.text.NVIC_SystemLPConfig), (28 bytes). + Removing stm32f0xx_misc.o(.ARM.exidx.text.NVIC_SystemLPConfig), (8 bytes). + Removing stm32f0xx_misc.o(.text.SysTick_CLKSourceConfig), (28 bytes). + Removing stm32f0xx_misc.o(.ARM.exidx.text.SysTick_CLKSourceConfig), (8 bytes). + Removing stm32f0xx_pwr.o(.text), (0 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_DeInit), (22 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_DeInit), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_BackupAccessCmd), (28 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_BackupAccessCmd), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_PVDLevelConfig), (20 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_PVDLevelConfig), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_PVDCmd), (24 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_PVDCmd), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_WakeUpPinCmd), (28 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_WakeUpPinCmd), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_EnterSleepMode), (32 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_EnterSleepMode), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_EnterSTOPMode), (64 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_EnterSTOPMode), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_EnterSTANDBYMode), (32 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_EnterSTANDBYMode), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_GetFlagStatus), (16 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_GetFlagStatus), (8 bytes). + Removing stm32f0xx_pwr.o(.text.PWR_ClearFlag), (16 bytes). + Removing stm32f0xx_pwr.o(.ARM.exidx.text.PWR_ClearFlag), (8 bytes). + Removing stm32f0xx_rcc.o(.text), (0 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_DeInit), (88 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_DeInit), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_HSEConfig), (16 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSEConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_WaitForHSEStartUp), (104 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_WaitForHSEStartUp), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_GetFlagStatus), (44 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetFlagStatus), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_AdjustHSICalibrationValue), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AdjustHSICalibrationValue), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_HSICmd), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSICmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_AdjustHSI14CalibrationValue), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AdjustHSI14CalibrationValue), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_HSI14Cmd), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSI14Cmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_HSI14ADCRequestCmd), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSI14ADCRequestCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_LSEConfig), (32 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_LSEConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_LSEDriveConfig), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_LSEDriveConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_LSICmd), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_LSICmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_PLLConfig), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PLLConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_PLLCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PLLCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_HSI48Cmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HSI48Cmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_PREDIV1Config), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PREDIV1Config), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_ClockSecuritySystemCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ClockSecuritySystemCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_MCOConfig), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_MCOConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_SYSCLKConfig), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_SYSCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_GetSYSCLKSource), (16 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetSYSCLKSource), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_HCLKConfig), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_HCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_PCLKConfig), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_PCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_ADCCLKConfig), (44 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ADCCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_CECCLKConfig), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_CECCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_I2CCLKConfig), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_I2CCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_USARTCLKConfig), (52 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_USARTCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_USBCLKConfig), (24 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_USBCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_GetClocksFreq), (356 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetClocksFreq), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_RTCCLKConfig), (16 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_RTCCLKConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_RTCCLKCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_RTCCLKCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_BackupResetCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_BackupResetCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AHBPeriphClockCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_APB2PeriphClockCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB2PeriphClockCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_APB1PeriphClockCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB1PeriphClockCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_AHBPeriphResetCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_AHBPeriphResetCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_APB2PeriphResetCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB2PeriphResetCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_APB1PeriphResetCmd), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_APB1PeriphResetCmd), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_ITConfig), (28 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ITConfig), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_ClearFlag), (20 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ClearFlag), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_GetITStatus), (16 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_GetITStatus), (8 bytes). + Removing stm32f0xx_rcc.o(.text.RCC_ClearITPendingBit), (12 bytes). + Removing stm32f0xx_rcc.o(.ARM.exidx.text.RCC_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_rcc.o(.rodata.APBAHBPrescTable), (16 bytes). + Removing stm32f0xx_rtc.o(.text), (0 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_DeInit), (288 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_DeInit), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_EnterInitMode), (120 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_EnterInitMode), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_WaitForSynchro), (136 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WaitForSynchro), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_Init), (168 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_Init), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_ExitInitMode), (16 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ExitInitMode), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_StructInit), (14 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_StructInit), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_WriteProtectionCmd), (28 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WriteProtectionCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_RefClockCmd), (156 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_RefClockCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_BypassShadowCmd), (44 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_BypassShadowCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_SetTime), (448 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetTime), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TimeStructInit), (12 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TimeStructInit), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetTime), (92 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetTime), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetSubSecond), (12 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetSubSecond), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_SetDate), (428 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetDate), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_DateStructInit), (14 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_DateStructInit), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetDate), (80 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetDate), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_SetAlarm), (264 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetAlarm), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_AlarmStructInit), (14 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_AlarmStructInit), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetAlarm), (148 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetAlarm), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_AlarmCmd), (140 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_AlarmCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_AlarmSubSecondConfig), (28 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_AlarmSubSecondConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetAlarmSubSecond), (20 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetAlarmSubSecond), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_WakeUpClockConfig), (36 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WakeUpClockConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_SetWakeUpCounter), (28 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SetWakeUpCounter), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetWakeUpCounter), (12 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetWakeUpCounter), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_WakeUpCmd), (140 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WakeUpCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_DayLightSavingConfig), (40 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_DayLightSavingConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetStoreOperation), (16 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetStoreOperation), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_OutputConfig), (40 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_OutputConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_CalibOutputCmd), (44 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_CalibOutputCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_CalibOutputConfig), (36 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_CalibOutputConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_SmoothCalibConfig), (84 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SmoothCalibConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TimeStampCmd), (52 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TimeStampCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetTimeStamp), (144 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetTimeStamp), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetTimeStampSubSecond), (12 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetTimeStampSubSecond), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TamperTriggerConfig), (28 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperTriggerConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TamperCmd), (28 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TamperFilterConfig), (24 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperFilterConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TamperSamplingFreqConfig), (24 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperSamplingFreqConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TamperPinsPrechargeDuration), (24 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperPinsPrechargeDuration), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TimeStampOnTamperDetectionCmd), (24 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TimeStampOnTamperDetectionCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_TamperPullUpCmd), (28 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_TamperPullUpCmd), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_WriteBackupRegister), (32 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_WriteBackupRegister), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_ReadBackupRegister), (32 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ReadBackupRegister), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_OutputTypeConfig), (24 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_OutputTypeConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_SynchroShiftConfig), (204 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_SynchroShiftConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_ITConfig), (64 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ITConfig), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetFlagStatus), (24 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetFlagStatus), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_ClearFlag), (32 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ClearFlag), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_GetITStatus), (52 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_GetITStatus), (8 bytes). + Removing stm32f0xx_rtc.o(.text.RTC_ClearITPendingBit), (32 bytes). + Removing stm32f0xx_rtc.o(.ARM.exidx.text.RTC_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_spi.o(.text), (0 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_DeInit), (64 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_DeInit), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_StructInit), (26 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_StructInit), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_Init), (80 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_Init), (8 bytes). + Removing stm32f0xx_spi.o(.text.I2S_StructInit), (14 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.I2S_StructInit), (8 bytes). + Removing stm32f0xx_spi.o(.text.I2S_Init), (172 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.I2S_Init), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_Cmd), (18 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_Cmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_TIModeCmd), (18 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_TIModeCmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.I2S_Cmd), (24 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.I2S_Cmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_DataSizeConfig), (16 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_DataSizeConfig), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_RxFIFOThresholdConfig), (20 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_RxFIFOThresholdConfig), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_BiDirectionalLineConfig), (32 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_BiDirectionalLineConfig), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_NSSInternalSoftwareConfig), (24 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_NSSInternalSoftwareConfig), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_SSOutputCmd), (18 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_SSOutputCmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_NSSPulseModeCmd), (18 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_NSSPulseModeCmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_SendData8), (4 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_SendData8), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_SendData16), (4 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_SendData16), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_ReceiveData8), (4 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_ReceiveData8), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_ReceiveData16), (4 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_ReceiveData16), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_CRCLengthConfig), (20 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_CRCLengthConfig), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_CalculateCRC), (24 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_CalculateCRC), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_TransmitCRC), (12 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_TransmitCRC), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_GetCRC), (16 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetCRC), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_GetCRCPolynomial), (4 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetCRCPolynomial), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_DMACmd), (20 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_DMACmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_LastDMATransferCmd), (20 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_LastDMATransferCmd), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_ITConfig), (26 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_ITConfig), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_GetTransmissionFIFOStatus), (10 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetTransmissionFIFOStatus), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_GetReceptionFIFOStatus), (10 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_GetReceptionFIFOStatus), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_GetFlagStatus), (10 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_GetFlagStatus), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_ClearFlag), (6 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_ClearFlag), (8 bytes). + Removing stm32f0xx_spi.o(.text.SPI_I2S_GetITStatus), (22 bytes). + Removing stm32f0xx_spi.o(.ARM.exidx.text.SPI_I2S_GetITStatus), (8 bytes). + Removing stm32f0xx_syscfg.o(.text), (0 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_DeInit), (36 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_DeInit), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_MemoryRemapConfig), (20 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_MemoryRemapConfig), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_DMAChannelRemapConfig), (28 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_DMAChannelRemapConfig), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_I2CFastModePlusConfig), (28 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_I2CFastModePlusConfig), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_IRDAEnvSelection), (24 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_IRDAEnvSelection), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_EXTILineConfig), (36 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_EXTILineConfig), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_GetPendingIT), (24 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_GetPendingIT), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_BreakConfig), (16 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_BreakConfig), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_GetFlagStatus), (16 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_GetFlagStatus), (8 bytes). + Removing stm32f0xx_syscfg.o(.text.SYSCFG_ClearFlag), (16 bytes). + Removing stm32f0xx_syscfg.o(.ARM.exidx.text.SYSCFG_ClearFlag), (8 bytes). + Removing stm32f0xx_tim.o(.text), (0 bytes). + Removing stm32f0xx_tim.o(.text.TIM_DeInit), (216 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_DeInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_TimeBaseInit), (112 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_TimeBaseInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_TimeBaseStructInit), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_TimeBaseStructInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_PrescalerConfig), (6 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_PrescalerConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_CounterModeConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_CounterModeConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetCounter), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCounter), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetAutoreload), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetAutoreload), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetCounter), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCounter), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetPrescaler), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetPrescaler), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_UpdateDisableConfig), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_UpdateDisableConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_UpdateRequestConfig), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_UpdateRequestConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ARRPreloadConfig), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ARRPreloadConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectOnePulseMode), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOnePulseMode), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetClockDivision), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetClockDivision), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_Cmd), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_Cmd), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_BDTRConfig), (32 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_BDTRConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_BDTRStructInit), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_BDTRStructInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_CtrlPWMOutputs), (28 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_CtrlPWMOutputs), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC1Init), (104 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1Init), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC2Init), (136 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2Init), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC3Init), (116 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3Init), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC4Init), (104 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4Init), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OCStructInit), (14 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OCStructInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectOCxM), (66 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOCxM), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetCompare1), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare1), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetCompare2), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare2), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetCompare3), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare3), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetCompare4), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetCompare4), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ForcedOC1Config), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC1Config), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ForcedOC2Config), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC2Config), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ForcedOC3Config), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC3Config), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ForcedOC4Config), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ForcedOC4Config), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_CCPreloadControl), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_CCPreloadControl), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC1PreloadConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1PreloadConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC2PreloadConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2PreloadConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC3PreloadConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3PreloadConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC4PreloadConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4PreloadConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC1FastConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1FastConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC2FastConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2FastConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC3FastConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3FastConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC4FastConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4FastConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ClearOC1Ref), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC1Ref), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ClearOC2Ref), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC2Ref), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ClearOC3Ref), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC3Ref), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ClearOC4Ref), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearOC4Ref), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC1PolarityConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1PolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC1NPolarityConfig), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC1NPolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC2PolarityConfig), (14 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2PolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC2NPolarityConfig), (14 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC2NPolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC3PolarityConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3PolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC3NPolarityConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC3NPolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_OC4PolarityConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_OC4PolarityConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectOCREFClear), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOCREFClear), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_CCxCmd), (22 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_CCxCmd), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_CCxNCmd), (22 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_CCxNCmd), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectCOM), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectCOM), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ICInit), (284 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ICInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetIC1Prescaler), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC1Prescaler), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetIC2Prescaler), (24 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC2Prescaler), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetIC3Prescaler), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC3Prescaler), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SetIC4Prescaler), (24 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SetIC4Prescaler), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ICStructInit), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ICStructInit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_PWMIConfig), (272 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_PWMIConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetCapture1), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture1), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetCapture2), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture2), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetCapture3), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture3), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetCapture4), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetCapture4), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ITConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ITConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GenerateEvent), (4 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GenerateEvent), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetFlagStatus), (10 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetFlagStatus), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ClearFlag), (6 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearFlag), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_GetITStatus), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_GetITStatus), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ClearITPendingBit), (6 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_DMAConfig), (8 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_DMAConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_DMACmd), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_DMACmd), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectCCDMA), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectCCDMA), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_InternalClockConfig), (10 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_InternalClockConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ITRxExternalClockConfig), (20 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ITRxExternalClockConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectInputTrigger), (12 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectInputTrigger), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_TIxExternalClockConfig), (104 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_TIxExternalClockConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ETRClockMode1Config), (24 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ETRClockMode1Config), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ETRConfig), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ETRConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_ETRClockMode2Config), (26 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_ETRClockMode2Config), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectOutputTrigger), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectOutputTrigger), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectSlaveMode), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectSlaveMode), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectMasterSlaveMode), (16 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectMasterSlaveMode), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_EncoderInterfaceConfig), (48 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_EncoderInterfaceConfig), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_SelectHallSensor), (18 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_SelectHallSensor), (8 bytes). + Removing stm32f0xx_tim.o(.text.TIM_RemapConfig), (6 bytes). + Removing stm32f0xx_tim.o(.ARM.exidx.text.TIM_RemapConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text), (0 bytes). + Removing stm32f0xx_usart.o(.text.USART_DeInit), (200 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DeInit), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_Init), (188 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_Init), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_StructInit), (22 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_StructInit), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ClockInit), (26 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ClockInit), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ClockStructInit), (12 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ClockStructInit), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_Cmd), (16 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_Cmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_DirectionModeCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DirectionModeCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_OverSampling8Cmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_OverSampling8Cmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_OneBitMethodCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_OneBitMethodCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_MSBFirstCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_MSBFirstCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_DataInvCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DataInvCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_InvPinCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_InvPinCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SWAPPinCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SWAPPinCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ReceiverTimeOutCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ReceiverTimeOutCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetReceiverTimeOut), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetReceiverTimeOut), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetPrescaler), (16 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetPrescaler), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_STOPModeCmd), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_STOPModeCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_StopModeWakeUpSourceConfig), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_StopModeWakeUpSourceConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_AutoBaudRateCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_AutoBaudRateCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_AutoBaudRateConfig), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_AutoBaudRateConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SendData), (12 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SendData), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ReceiveData), (12 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ReceiveData), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetAddress), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetAddress), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_MuteModeCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_MuteModeCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_MuteModeWakeUpConfig), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_MuteModeWakeUpConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_AddressDetectionConfig), (16 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_AddressDetectionConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_LINBreakDetectLengthConfig), (16 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_LINBreakDetectLengthConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_LINCmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_LINCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_HalfDuplexCmd), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_HalfDuplexCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetGuardTime), (16 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetGuardTime), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SmartCardCmd), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SmartCardCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SmartCardNACKCmd), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SmartCardNACKCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetAutoRetryCount), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetAutoRetryCount), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetBlockLength), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetBlockLength), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_IrDAConfig), (16 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_IrDAConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_IrDACmd), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_IrDACmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_DECmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DECmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_DEPolarityConfig), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DEPolarityConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetDEAssertionTime), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetDEAssertionTime), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_SetDEDeassertionTime), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_SetDEDeassertionTime), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_DMACmd), (20 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DMACmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_DMAReceptionErrorConfig), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_DMAReceptionErrorConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ITConfig), (46 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ITConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_RequestCmd), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_RequestCmd), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_OverrunDetectionConfig), (18 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_OverrunDetectionConfig), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_GetFlagStatus), (10 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_GetFlagStatus), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ClearFlag), (4 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ClearFlag), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_GetITStatus), (44 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_GetITStatus), (8 bytes). + Removing stm32f0xx_usart.o(.text.USART_ClearITPendingBit), (10 bytes). + Removing stm32f0xx_usart.o(.ARM.exidx.text.USART_ClearITPendingBit), (8 bytes). + Removing stm32f0xx_wwdg.o(.text), (0 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_DeInit), (22 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_DeInit), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_SetPrescaler), (20 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_SetPrescaler), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_SetWindowValue), (36 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_SetWindowValue), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_EnableIT), (20 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_EnableIT), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_SetCounter), (16 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_SetCounter), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_Enable), (16 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_Enable), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_GetFlagStatus), (16 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_GetFlagStatus), (8 bytes). + Removing stm32f0xx_wwdg.o(.text.WWDG_ClearFlag), (12 bytes). + Removing stm32f0xx_wwdg.o(.ARM.exidx.text.WWDG_ClearFlag), (8 bytes). + Removing main.o(.text), (0 bytes). + Removing main.o(.ARM.exidx.text.main), (8 bytes). + Removing main.o(.ARM.use_no_argv), (4 bytes). + Removing stm32f0xx_it.o(.text), (0 bytes). + Removing stm32f0xx_it.o(.ARM.exidx.text.NMI_Handler), (8 bytes). + Removing stm32f0xx_it.o(.ARM.exidx.text.HardFault_Handler), (8 bytes). + Removing stm32f0xx_it.o(.ARM.exidx.text.SVC_Handler), (8 bytes). + Removing stm32f0xx_it.o(.ARM.exidx.text.PendSV_Handler), (8 bytes). + Removing stm32f0xx_it.o(.ARM.exidx.text.SysTick_Handler), (8 bytes). + +1114 unused section(s) (total 34546 bytes) removed from the image. + +============================================================================== + +Image Symbol Table + + Local Symbols + + Symbol Name Value Ov Type Size Object(Section) + + ../../Libraries/CMSIS/Device/STM32F0xx/Source/arm/startup_stm32f072.s 0x00000000 Number 0 startup_stm32f072.o ABSOLUTE + ../clib/division.s 0x00000000 Number 0 aeabi_sdivfast.o ABSOLUTE + ../clib/division.s 0x00000000 Number 0 aeabi_sdivfast_div0.o ABSOLUTE + ../clib/microlib/division.c 0x00000000 Number 0 uidiv.o ABSOLUTE + ../clib/microlib/division.c 0x00000000 Number 0 uidiv_div0.o ABSOLUTE + ../clib/microlib/division.c 0x00000000 Number 0 idiv_div0.o ABSOLUTE + ../clib/microlib/division.c 0x00000000 Number 0 idiv0.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry2.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry5.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry7a.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry7b.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry8a.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry8b.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry9a.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry9b.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry10a.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry10b.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry11a.o ABSOLUTE + ../clib/microlib/init/entry.s 0x00000000 Number 0 entry11b.o ABSOLUTE + ../clib/microlib/string/memset.c 0x00000000 Number 0 memseta.o ABSOLUTE + dc.s 0x00000000 Number 0 dc.o ABSOLUTE + handlers.s 0x00000000 Number 0 handlers.o ABSOLUTE + init.s 0x00000000 Number 0 init.o ABSOLUTE + main.c 0x00000000 Number 0 main.o ABSOLUTE + stm32f0xx_adc.c 0x00000000 Number 0 stm32f0xx_adc.o ABSOLUTE + stm32f0xx_can.c 0x00000000 Number 0 stm32f0xx_can.o ABSOLUTE + stm32f0xx_cec.c 0x00000000 Number 0 stm32f0xx_cec.o ABSOLUTE + stm32f0xx_comp.c 0x00000000 Number 0 stm32f0xx_comp.o ABSOLUTE + stm32f0xx_crc.c 0x00000000 Number 0 stm32f0xx_crc.o ABSOLUTE + stm32f0xx_crs.c 0x00000000 Number 0 stm32f0xx_crs.o ABSOLUTE + stm32f0xx_dac.c 0x00000000 Number 0 stm32f0xx_dac.o ABSOLUTE + stm32f0xx_dbgmcu.c 0x00000000 Number 0 stm32f0xx_dbgmcu.o ABSOLUTE + stm32f0xx_dma.c 0x00000000 Number 0 stm32f0xx_dma.o ABSOLUTE + stm32f0xx_exti.c 0x00000000 Number 0 stm32f0xx_exti.o ABSOLUTE + stm32f0xx_flash.c 0x00000000 Number 0 stm32f0xx_flash.o ABSOLUTE + stm32f0xx_gpio.c 0x00000000 Number 0 stm32f0xx_gpio.o ABSOLUTE + stm32f0xx_i2c.c 0x00000000 Number 0 stm32f0xx_i2c.o ABSOLUTE + stm32f0xx_it.c 0x00000000 Number 0 stm32f0xx_it.o ABSOLUTE + stm32f0xx_iwdg.c 0x00000000 Number 0 stm32f0xx_iwdg.o ABSOLUTE + stm32f0xx_misc.c 0x00000000 Number 0 stm32f0xx_misc.o ABSOLUTE + stm32f0xx_pwr.c 0x00000000 Number 0 stm32f0xx_pwr.o ABSOLUTE + stm32f0xx_rcc.c 0x00000000 Number 0 stm32f0xx_rcc.o ABSOLUTE + stm32f0xx_rtc.c 0x00000000 Number 0 stm32f0xx_rtc.o ABSOLUTE + stm32f0xx_spi.c 0x00000000 Number 0 stm32f0xx_spi.o ABSOLUTE + stm32f0xx_syscfg.c 0x00000000 Number 0 stm32f0xx_syscfg.o ABSOLUTE + stm32f0xx_tim.c 0x00000000 Number 0 stm32f0xx_tim.o ABSOLUTE + stm32f0xx_usart.c 0x00000000 Number 0 stm32f0xx_usart.o ABSOLUTE + stm32f0xx_wwdg.c 0x00000000 Number 0 stm32f0xx_wwdg.o ABSOLUTE + system_stm32f0xx.c 0x00000000 Number 0 system_stm32f0xx.o ABSOLUTE + RESET 0x08000000 Section 192 startup_stm32f072.o(RESET) + .ARM.Collect$$$$00000000 0x080000c0 Section 0 entry.o(.ARM.Collect$$$$00000000) + .ARM.Collect$$$$00000001 0x080000c0 Section 4 entry2.o(.ARM.Collect$$$$00000001) + .ARM.Collect$$$$00000004 0x080000c4 Section 4 entry5.o(.ARM.Collect$$$$00000004) + .ARM.Collect$$$$00000008 0x080000c8 Section 0 entry7b.o(.ARM.Collect$$$$00000008) + .ARM.Collect$$$$0000000A 0x080000c8 Section 0 entry8b.o(.ARM.Collect$$$$0000000A) + .ARM.Collect$$$$0000000B 0x080000c8 Section 8 entry9a.o(.ARM.Collect$$$$0000000B) + __lit__00000000 0x080000d0 Data 4 entry2.o(.ARM.Collect$$$$00002712) + .ARM.Collect$$$$0000000D 0x080000d0 Section 0 entry10a.o(.ARM.Collect$$$$0000000D) + .ARM.Collect$$$$0000000F 0x080000d0 Section 0 entry11a.o(.ARM.Collect$$$$0000000F) + .ARM.Collect$$$$00002712 0x080000d0 Section 4 entry2.o(.ARM.Collect$$$$00002712) + .text 0x080000d4 Section 88 startup_stm32f072.o(.text) + .text 0x0800012c Section 36 init.o(.text) + [Anonymous Symbol] 0x08000150 Section 0 stm32f0xx_gpio.o(.text.GPIO_Init) + [Anonymous Symbol] 0x08000240 Section 0 stm32f0xx_it.o(.text.HardFault_Handler) + [Anonymous Symbol] 0x08000242 Section 0 stm32f0xx_it.o(.text.NMI_Handler) + [Anonymous Symbol] 0x08000244 Section 0 stm32f0xx_it.o(.text.PendSV_Handler) + [Anonymous Symbol] 0x08000248 Section 0 stm32f0xx_rcc.o(.text.RCC_AHBPeriphClockCmd) + __arm_cp.31_0 0x08000260 Number 4 stm32f0xx_rcc.o(.text.RCC_AHBPeriphClockCmd) + [Anonymous Symbol] 0x08000264 Section 0 stm32f0xx_it.o(.text.SVC_Handler) + [Anonymous Symbol] 0x08000266 Section 0 stm32f0xx_it.o(.text.SysTick_Handler) + [Anonymous Symbol] 0x08000268 Section 0 system_stm32f0xx.o(.text.SystemInit) + __arm_cp.0_0 0x0800036c Number 4 system_stm32f0xx.o(.text.SystemInit) + __arm_cp.0_1 0x08000370 Number 4 system_stm32f0xx.o(.text.SystemInit) + __arm_cp.0_2 0x08000374 Number 4 system_stm32f0xx.o(.text.SystemInit) + __arm_cp.0_3 0x08000378 Number 4 system_stm32f0xx.o(.text.SystemInit) + [Anonymous Symbol] 0x0800037c Section 0 main.o(.text.main) + __arm_cp.0_0 0x080003c4 Number 4 main.o(.text.main) + __arm_cp.0_1 0x080003c8 Number 4 main.o(.text.main) + __arm_cp.0_2 0x080003cc Number 4 main.o(.text.main) + i.__scatterload_copy 0x080003d0 Section 14 handlers.o(i.__scatterload_copy) + i.__scatterload_null 0x080003de Section 2 handlers.o(i.__scatterload_null) + i.__scatterload_zeroinit 0x080003e0 Section 14 handlers.o(i.__scatterload_zeroinit) + STACK 0x20000008 Section 1024 startup_stm32f072.o(STACK) + + Global Symbols + + Symbol Name Value Ov Type Size Object(Section) + + BuildAttributes$$THM_ISAv3M$S$PE$A:L22$X:L11$S22$IEEE1$IW$~IW$USESV6$~STKCKD$USESV7$~SHL$OTIME$EBA8$MICROLIB$REQ8$PRES8$EABIv2 0x00000000 Number 0 anon$$obj.o ABSOLUTE + __cpp_initialize__aeabi_ - Undefined Weak Reference + __cxa_finalize - Undefined Weak Reference + __decompress - Undefined Weak Reference + _clock_init - Undefined Weak Reference + _microlib_exit - Undefined Weak Reference + __Vectors_Size 0x000000c0 Number 0 startup_stm32f072.o ABSOLUTE + __Vectors 0x08000000 Data 4 startup_stm32f072.o(RESET) + __Vectors_End 0x080000c0 Data 0 startup_stm32f072.o(RESET) + __main 0x080000c1 Thumb Code 0 entry.o(.ARM.Collect$$$$00000000) + _main_stk 0x080000c1 Thumb Code 0 entry2.o(.ARM.Collect$$$$00000001) + _main_scatterload 0x080000c5 Thumb Code 0 entry5.o(.ARM.Collect$$$$00000004) + __main_after_scatterload 0x080000c9 Thumb Code 0 entry5.o(.ARM.Collect$$$$00000004) + _main_clock 0x080000c9 Thumb Code 0 entry7b.o(.ARM.Collect$$$$00000008) + _main_cpp_init 0x080000c9 Thumb Code 0 entry8b.o(.ARM.Collect$$$$0000000A) + _main_init 0x080000c9 Thumb Code 0 entry9a.o(.ARM.Collect$$$$0000000B) + __rt_final_cpp 0x080000d1 Thumb Code 0 entry10a.o(.ARM.Collect$$$$0000000D) + __rt_final_exit 0x080000d1 Thumb Code 0 entry11a.o(.ARM.Collect$$$$0000000F) + Reset_Handler 0x080000d5 Thumb Code 38 startup_stm32f072.o(.text) + ADC1_COMP_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + CEC_CAN_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + DMA1_Channel1_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + DMA1_Channel2_3_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + DMA1_Channel4_5_6_7_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + EXTI0_1_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + EXTI2_3_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + EXTI4_15_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + FLASH_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + I2C1_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + I2C2_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + PVD_VDDIO2_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + RCC_CRS_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + RTC_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + SPI1_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + SPI2_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM14_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM15_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM16_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM17_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM1_BRK_UP_TRG_COM_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM1_CC_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM2_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM3_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM6_DAC_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TIM7_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + TSC_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + USART1_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + USART2_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + USART3_4_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + USB_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + WWDG_IRQHandler 0x08000105 Thumb Code 0 startup_stm32f072.o(.text) + __scatterload 0x0800012d Thumb Code 28 init.o(.text) + __scatterload_rt2 0x0800012d Thumb Code 0 init.o(.text) + GPIO_Init 0x08000151 Thumb Code 240 stm32f0xx_gpio.o(.text.GPIO_Init) + HardFault_Handler 0x08000241 Thumb Code 2 stm32f0xx_it.o(.text.HardFault_Handler) + NMI_Handler 0x08000243 Thumb Code 2 stm32f0xx_it.o(.text.NMI_Handler) + PendSV_Handler 0x08000245 Thumb Code 2 stm32f0xx_it.o(.text.PendSV_Handler) + RCC_AHBPeriphClockCmd 0x08000249 Thumb Code 24 stm32f0xx_rcc.o(.text.RCC_AHBPeriphClockCmd) + SVC_Handler 0x08000265 Thumb Code 2 stm32f0xx_it.o(.text.SVC_Handler) + SysTick_Handler 0x08000267 Thumb Code 2 stm32f0xx_it.o(.text.SysTick_Handler) + SystemInit 0x08000269 Thumb Code 260 system_stm32f0xx.o(.text.SystemInit) + main 0x0800037d Thumb Code 72 main.o(.text.main) + __scatterload_copy 0x080003d1 Thumb Code 14 handlers.o(i.__scatterload_copy) + __scatterload_null 0x080003df Thumb Code 2 handlers.o(i.__scatterload_null) + __scatterload_zeroinit 0x080003e1 Thumb Code 14 handlers.o(i.__scatterload_zeroinit) + Region$$Table$$Base 0x080003f0 Number 0 anon$$obj.o(Region$$Table) + Region$$Table$$Limit 0x08000400 Number 0 anon$$obj.o(Region$$Table) + GPIO_InitStructure 0x20000000 Data 8 main.o(.bss.GPIO_InitStructure) + __initial_sp 0x20000408 Data 0 startup_stm32f072.o(STACK) + + + +============================================================================== + +Memory Map of the image + + Image Entry point : 0x080000c1 + + Load Region LR_IROM1 (Base: 0x08000000, Size: 0x00000400, Max: 0x00020000, ABSOLUTE) + + Execution Region ER_IROM1 (Exec base: 0x08000000, Load base: 0x08000000, Size: 0x00000400, Max: 0x00020000, ABSOLUTE) + + Exec Addr Load Addr Size Type Attr Idx E Section Name Object + + 0x08000000 0x08000000 0x000000c0 Data RO 3 RESET startup_stm32f072.o + 0x080000c0 0x080000c0 0x00000000 Code RO 1312 * .ARM.Collect$$$$00000000 mc_p.l(entry.o) + 0x080000c0 0x080000c0 0x00000004 Code RO 1323 .ARM.Collect$$$$00000001 mc_p.l(entry2.o) + 0x080000c4 0x080000c4 0x00000004 Code RO 1326 .ARM.Collect$$$$00000004 mc_p.l(entry5.o) + 0x080000c8 0x080000c8 0x00000000 Code RO 1328 .ARM.Collect$$$$00000008 mc_p.l(entry7b.o) + 0x080000c8 0x080000c8 0x00000000 Code RO 1330 .ARM.Collect$$$$0000000A mc_p.l(entry8b.o) + 0x080000c8 0x080000c8 0x00000008 Code RO 1331 .ARM.Collect$$$$0000000B mc_p.l(entry9a.o) + 0x080000d0 0x080000d0 0x00000000 Code RO 1333 .ARM.Collect$$$$0000000D mc_p.l(entry10a.o) + 0x080000d0 0x080000d0 0x00000000 Code RO 1335 .ARM.Collect$$$$0000000F mc_p.l(entry11a.o) + 0x080000d0 0x080000d0 0x00000004 Code RO 1324 .ARM.Collect$$$$00002712 mc_p.l(entry2.o) + 0x080000d4 0x080000d4 0x00000058 Code RO 4 .text startup_stm32f072.o + 0x0800012c 0x0800012c 0x00000024 Code RO 1347 .text mc_p.l(init.o) + 0x08000150 0x08000150 0x000000f0 Code RO 483 .text.GPIO_Init stm32f0xx_gpio.o + 0x08000240 0x08000240 0x00000002 Code RO 1298 .text.HardFault_Handler stm32f0xx_it.o + 0x08000242 0x08000242 0x00000002 Code RO 1296 .text.NMI_Handler stm32f0xx_it.o + 0x08000244 0x08000244 0x00000002 Code RO 1302 .text.PendSV_Handler stm32f0xx_it.o + 0x08000246 0x08000246 0x00000002 PAD + 0x08000248 0x08000248 0x0000001c Code RO 733 .text.RCC_AHBPeriphClockCmd stm32f0xx_rcc.o + 0x08000264 0x08000264 0x00000002 Code RO 1300 .text.SVC_Handler stm32f0xx_it.o + 0x08000266 0x08000266 0x00000002 Code RO 1304 .text.SysTick_Handler stm32f0xx_it.o + 0x08000268 0x08000268 0x00000114 Code RO 11 .text.SystemInit system_stm32f0xx.o + 0x0800037c 0x0800037c 0x00000054 Code RO 1286 .text.main main.o + 0x080003d0 0x080003d0 0x0000000e Code RO 1351 i.__scatterload_copy mc_p.l(handlers.o) + 0x080003de 0x080003de 0x00000002 Code RO 1352 i.__scatterload_null mc_p.l(handlers.o) + 0x080003e0 0x080003e0 0x0000000e Code RO 1353 i.__scatterload_zeroinit mc_p.l(handlers.o) + 0x080003ee 0x080003ee 0x00000002 PAD + 0x080003f0 0x080003f0 0x00000010 Data RO 1350 Region$$Table anon$$obj.o + + + Execution Region RW_IRAM1 (Exec base: 0x20000000, Load base: 0x08000400, Size: 0x00000408, Max: 0x00004000, ABSOLUTE) + + Exec Addr Load Addr Size Type Attr Idx E Section Name Object + + 0x20000000 - 0x00000008 Zero RW 1288 .bss.GPIO_InitStructure main.o + 0x20000008 - 0x00000400 Zero RW 1 STACK startup_stm32f072.o + + +============================================================================== + +Image component sizes + + + Code (inc. data) RO Data RW Data ZI Data Debug Object Name + + 84 12 0 0 8 1920 main.o + 88 38 192 0 1024 740 startup_stm32f072.o + 240 0 0 0 0 4942 stm32f0xx_gpio.o + 10 0 0 0 0 708 stm32f0xx_it.o + 28 4 0 0 0 11474 stm32f0xx_rcc.o + 276 16 0 0 0 2334 system_stm32f0xx.o + + ---------------------------------------------------------------------- + 728 70 208 0 1032 22118 Object Totals + 0 0 16 0 0 0 (incl. Generated) + 2 0 0 0 0 0 (incl. Padding) + + ---------------------------------------------------------------------- + + Code (inc. data) RO Data RW Data ZI Data Debug Library Member Name + + 0 0 0 0 0 0 entry.o + 0 0 0 0 0 0 entry10a.o + 0 0 0 0 0 0 entry11a.o + 8 4 0 0 0 0 entry2.o + 4 0 0 0 0 0 entry5.o + 0 0 0 0 0 0 entry7b.o + 0 0 0 0 0 0 entry8b.o + 8 4 0 0 0 0 entry9a.o + 30 0 0 0 0 0 handlers.o + 36 8 0 0 0 68 init.o + + ---------------------------------------------------------------------- + 88 16 0 0 0 68 Library Totals + 2 0 0 0 0 0 (incl. Padding) + + ---------------------------------------------------------------------- + + Code (inc. data) RO Data RW Data ZI Data Debug Library Name + + 86 16 0 0 0 68 mc_p.l + + ---------------------------------------------------------------------- + 88 16 0 0 0 68 Library Totals + + ---------------------------------------------------------------------- + +============================================================================== + + + Code (inc. data) RO Data RW Data ZI Data Debug + + 816 86 208 0 1032 22258 Grand Totals + 816 86 208 0 1032 22258 ELF Image Totals + 816 86 208 0 0 0 ROM Totals + +============================================================================== + + Total RO Size (Code + RO Data) 1024 ( 1.00kB) + Total RW Size (RW Data + ZI Data) 1032 ( 1.01kB) + Total ROM Size (Code + RO Data + RW Data) 1024 ( 1.00kB) + +============================================================================== + diff --git a/Project/MDK/Objects/Template.axf b/Project/MDK/Objects/Template.axf new file mode 100644 index 0000000..d0d37ef Binary files /dev/null and b/Project/MDK/Objects/Template.axf differ diff --git a/Project/MDK/Objects/Template.build_log.htm b/Project/MDK/Objects/Template.build_log.htm new file mode 100644 index 0000000..2bf753e --- /dev/null +++ b/Project/MDK/Objects/Template.build_log.htm @@ -0,0 +1,76 @@ + + +
+
µVision Build Log

+
Tool Versions:

+IDE-Version: ¦ÌVision V5.37.0.0
+Copyright (C) 2022 ARM Ltd and ARM Germany GmbH. All rights reserved.
+License Information: QIU qpeng0504@outlook.com, NSSC, LIC=8QQ60-VKBBN-BGN7M-A54KG-5HIEK-FI8B2
+ 
+Tool Versions:
+Toolchain:       MDK-ARM Community  Version: 5.37.0.0
+Toolchain Path:  C:\Keil_v5\ARM\ARMCLANG\Bin
+C Compiler:      ArmClang.exe V6.18
+Assembler:       Armasm.exe V6.18
+Linker/Locator:  ArmLink.exe V6.18
+Library Manager: ArmAr.exe V6.18
+Hex Converter:   FromElf.exe V6.18
+CPU DLL:         SARMCM3.DLL V5.37.0.0
+Dialog DLL:      DARMCM1.DLL V1.19.6.0
+Target DLL:      CMSIS_AGDI.dll V1.33.12.0
+Dialog DLL:      TARMCM1.DLL V1.14.6.0
+ 
+
Project:

+C:\Users\qpeng\Desktop\stm32\project\stm32f072_template\Project\MDK\Template.uvprojx
+Project File Date:  10/21/2022
+
+
Output:

+*** Using Compiler 'V6.18', folder: 'C:\Keil_v5\ARM\ARMCLANG\Bin'
+Rebuild target 'Target 1'
+assembling startup_stm32f072.s...
+compiling stm32f0xx_cec.c...
+compiling stm32f0xx_crc.c...
+compiling system_stm32f0xx.c...
+compiling stm32f0xx_adc.c...
+compiling stm32f0xx_comp.c...
+compiling stm32f0xx_can.c...
+compiling stm32f0xx_crs.c...
+compiling stm32f0xx_dma.c...
+compiling stm32f0xx_exti.c...
+compiling stm32f0xx_dbgmcu.c...
+compiling stm32f0xx_dac.c...
+compiling stm32f0xx_gpio.c...
+compiling stm32f0xx_misc.c...
+compiling stm32f0xx_pwr.c...
+compiling stm32f0xx_iwdg.c...
+compiling stm32f0xx_i2c.c...
+compiling stm32f0xx_rcc.c...
+compiling stm32f0xx_rtc.c...
+compiling stm32f0xx_syscfg.c...
+compiling stm32f0xx_spi.c...
+compiling stm32f0xx_wwdg.c...
+compiling stm32f0xx_usart.c...
+compiling stm32f0xx_flash.c...
+compiling stm32f0xx_tim.c...
+compiling stm32f0xx_it.c...
+compiling main.c...
+linking...
+Program Size: Code=816 RO-data=208 RW-data=0 ZI-data=1032  
+FromELF: creating hex file...
+".\Objects\Template.axf" - 0 Error(s), 0 Warning(s).
+
+
Software Packages used:

+
+Package Vendor: Keil
+                https://www.keil.com/pack/Keil.STM32F0xx_DFP.2.1.1.pack
+                Keil.STM32F0xx_DFP.2.1.1
+                STMicroelectronics STM32F0 Series Device Support, Drivers and Examples
+
+
Collection of Component include folders:

+  C:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include
+
+
Collection of Component Files used:

+Build Time Elapsed:  00:00:03
+
+ + diff --git a/Project/MDK/Objects/Template.hex b/Project/MDK/Objects/Template.hex new file mode 100644 index 0000000..f3e0b4d --- /dev/null +++ b/Project/MDK/Objects/Template.hex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diff --git a/Project/MDK/Objects/Template.htm b/Project/MDK/Objects/Template.htm new file mode 100644 index 0000000..2647942 --- /dev/null +++ b/Project/MDK/Objects/Template.htm @@ -0,0 +1,254 @@ + + +Static Call Graph - [.\Objects\Template.axf] +
+

Static Call Graph for image .\Objects\Template.axf

+

#<CALLGRAPH># ARM Linker, 6180002: Last Updated: Mon Oct 24 10:22:20 2022 +

+

Maximum Stack Usage = 36 bytes + Unknown(Cycles, Untraceable Function Pointers)

+Call chain for Maximum Stack Depth:

+main ⇒ GPIO_Init +

+

+Mutually Recursive functions +

  • ADC1_COMP_IRQHandler   ⇒   ADC1_COMP_IRQHandler
    +
  • HardFault_Handler   ⇒   HardFault_Handler
    + +

    +

    +Function Pointers +

      +
    • ADC1_COMP_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • CEC_CAN_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • DMA1_Channel1_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • DMA1_Channel2_3_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • DMA1_Channel4_5_6_7_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • EXTI0_1_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • EXTI2_3_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • EXTI4_15_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • FLASH_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • HardFault_Handler from stm32f0xx_it.o(.text.HardFault_Handler) referenced from startup_stm32f072.o(RESET) +
    • I2C1_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • I2C2_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • NMI_Handler from stm32f0xx_it.o(.text.NMI_Handler) referenced from startup_stm32f072.o(RESET) +
    • PVD_VDDIO2_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • PendSV_Handler from stm32f0xx_it.o(.text.PendSV_Handler) referenced from startup_stm32f072.o(RESET) +
    • RCC_CRS_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • RTC_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • Reset_Handler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • SPI1_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • SPI2_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • SVC_Handler from stm32f0xx_it.o(.text.SVC_Handler) referenced from startup_stm32f072.o(RESET) +
    • SysTick_Handler from stm32f0xx_it.o(.text.SysTick_Handler) referenced from startup_stm32f072.o(RESET) +
    • SystemInit from system_stm32f0xx.o(.text.SystemInit) referenced from startup_stm32f072.o(.text) +
    • TIM14_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM15_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM16_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM17_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM1_BRK_UP_TRG_COM_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM1_CC_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM2_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM3_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM6_DAC_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TIM7_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • TSC_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • USART1_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • USART2_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • USART3_4_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • USB_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • WWDG_IRQHandler from startup_stm32f072.o(.text) referenced from startup_stm32f072.o(RESET) +
    • __main from entry.o(.ARM.Collect$$$$00000000) referenced from startup_stm32f072.o(.text) +
    • main from main.o(.text.main) referenced from entry9a.o(.ARM.Collect$$$$0000000B) +
    +

    +

    +Global Symbols +

    +

    __main (Thumb, 0 bytes, Stack size unknown bytes, entry.o(.ARM.Collect$$$$00000000)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(.text) +
    +

    _main_stk (Thumb, 0 bytes, Stack size unknown bytes, entry2.o(.ARM.Collect$$$$00000001)) + +

    _main_scatterload (Thumb, 0 bytes, Stack size unknown bytes, entry5.o(.ARM.Collect$$$$00000004)) +

    [Calls]

    • >>   __scatterload +
    + +

    __main_after_scatterload (Thumb, 0 bytes, Stack size unknown bytes, entry5.o(.ARM.Collect$$$$00000004)) +

    [Called By]

    • >>   __scatterload +
    + +

    _main_clock (Thumb, 0 bytes, Stack size unknown bytes, entry7b.o(.ARM.Collect$$$$00000008)) + +

    _main_cpp_init (Thumb, 0 bytes, Stack size unknown bytes, entry8b.o(.ARM.Collect$$$$0000000A)) + +

    _main_init (Thumb, 0 bytes, Stack size unknown bytes, entry9a.o(.ARM.Collect$$$$0000000B)) + +

    __rt_final_cpp (Thumb, 0 bytes, Stack size unknown bytes, entry10a.o(.ARM.Collect$$$$0000000D)) + +

    __rt_final_exit (Thumb, 0 bytes, Stack size unknown bytes, entry11a.o(.ARM.Collect$$$$0000000F)) + +

    Reset_Handler (Thumb, 38 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    ADC1_COMP_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +

    [Calls]

    • >>   ADC1_COMP_IRQHandler +
    +
    [Called By]
    • >>   ADC1_COMP_IRQHandler +
    +
    [Address Reference Count : 1]
    • startup_stm32f072.o(RESET) +
    +

    CEC_CAN_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    DMA1_Channel1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    DMA1_Channel2_3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    DMA1_Channel4_5_6_7_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    EXTI0_1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    EXTI2_3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    EXTI4_15_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    FLASH_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    I2C1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    I2C2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    PVD_VDDIO2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    RCC_CRS_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    RTC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    SPI1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    SPI2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM14_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM15_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM16_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM17_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM1_BRK_UP_TRG_COM_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM1_CC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM6_DAC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TIM7_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    TSC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    USART1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    USART2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    USART3_4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    USB_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    WWDG_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f072.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    __scatterload (Thumb, 28 bytes, Stack size 0 bytes, init.o(.text)) +

    [Calls]

    • >>   __main_after_scatterload +
    +
    [Called By]
    • >>   _main_scatterload +
    + +

    __scatterload_rt2 (Thumb, 0 bytes, Stack size 0 bytes, init.o(.text), UNUSED) + +

    GPIO_Init (Thumb, 240 bytes, Stack size 36 bytes, stm32f0xx_gpio.o(.text.GPIO_Init)) +

    [Stack]

    • Max Depth = 36
    • Call Chain = GPIO_Init +
    +
    [Called By]
    • >>   main +
    + +

    HardFault_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f0xx_it.o(.text.HardFault_Handler)) +

    [Calls]

    • >>   HardFault_Handler +
    +
    [Called By]
    • >>   HardFault_Handler +
    +
    [Address Reference Count : 1]
    • startup_stm32f072.o(RESET) +
    +

    NMI_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f0xx_it.o(.text.NMI_Handler)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    PendSV_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f0xx_it.o(.text.PendSV_Handler)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    RCC_AHBPeriphClockCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f0xx_rcc.o(.text.RCC_AHBPeriphClockCmd)) +

    [Called By]

    • >>   main +
    + +

    SVC_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f0xx_it.o(.text.SVC_Handler)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    SysTick_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f0xx_it.o(.text.SysTick_Handler)) +
    [Address Reference Count : 1]

    • startup_stm32f072.o(RESET) +
    +

    SystemInit (Thumb, 260 bytes, Stack size 24 bytes, system_stm32f0xx.o(.text.SystemInit)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = SystemInit +
    +
    [Address Reference Count : 1]
    • startup_stm32f072.o(.text) +
    +

    main (Thumb, 72 bytes, Stack size 0 bytes, main.o(.text.main)) +

    [Stack]

    • Max Depth = 36
    • Call Chain = main ⇒ GPIO_Init +
    +
    [Calls]
    • >>   GPIO_Init +
    • >>   RCC_AHBPeriphClockCmd +
    +
    [Address Reference Count : 1]
    • entry9a.o(.ARM.Collect$$$$0000000B) +
    +

    __scatterload_copy (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_copy), UNUSED) + +

    __scatterload_null (Thumb, 2 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_null), UNUSED) + +

    __scatterload_zeroinit (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_zeroinit), UNUSED) +

    +

    +Local Symbols +

    +

    +Undefined Global Symbols +

    diff --git a/Project/MDK/Objects/Template.lnp b/Project/MDK/Objects/Template.lnp new file mode 100644 index 0000000..8ba6102 --- /dev/null +++ b/Project/MDK/Objects/Template.lnp @@ -0,0 +1,32 @@ +--cpu Cortex-M0 +".\objects\startup_stm32f072.o" +".\objects\system_stm32f0xx.o" +".\objects\stm32f0xx_adc.o" +".\objects\stm32f0xx_can.o" +".\objects\stm32f0xx_cec.o" +".\objects\stm32f0xx_comp.o" +".\objects\stm32f0xx_crc.o" +".\objects\stm32f0xx_crs.o" +".\objects\stm32f0xx_dac.o" +".\objects\stm32f0xx_dbgmcu.o" +".\objects\stm32f0xx_dma.o" +".\objects\stm32f0xx_exti.o" +".\objects\stm32f0xx_flash.o" +".\objects\stm32f0xx_gpio.o" +".\objects\stm32f0xx_i2c.o" +".\objects\stm32f0xx_iwdg.o" +".\objects\stm32f0xx_misc.o" +".\objects\stm32f0xx_pwr.o" +".\objects\stm32f0xx_rcc.o" +".\objects\stm32f0xx_rtc.o" +".\objects\stm32f0xx_spi.o" +".\objects\stm32f0xx_syscfg.o" +".\objects\stm32f0xx_tim.o" +".\objects\stm32f0xx_usart.o" +".\objects\stm32f0xx_wwdg.o" +".\objects\main.o" +".\objects\stm32f0xx_it.o" +--library_type=microlib --strict --scatter ".\Objects\Template.sct" +--summary_stderr --info summarysizes --map --load_addr_map_info --xref --callgraph --symbols +--info sizes --info totals --info unused --info veneers +--list ".\Listings\Template.map" -o .\Objects\Template.axf \ No newline at end of file diff --git a/Project/MDK/Objects/Template.sct b/Project/MDK/Objects/Template.sct new file mode 100644 index 0000000..85574fb --- /dev/null +++ b/Project/MDK/Objects/Template.sct @@ -0,0 +1,16 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00020000 { ; load region size_region + ER_IROM1 0x08000000 0x00020000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + .ANY (+XO) + } + RW_IRAM1 0x20000000 0x00004000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/Project/MDK/Objects/Template_Target 1.dep b/Project/MDK/Objects/Template_Target 1.dep new file mode 100644 index 0000000..8082acc --- /dev/null +++ b/Project/MDK/Objects/Template_Target 1.dep @@ -0,0 +1,838 @@ +Dependencies for Project 'Template', Target 'Target 1': (DO NOT MODIFY !) +CompilerVersion: 6180000::V6.18::ARMCLANG +F (..\..\Libraries\CMSIS\Device\STM32F0xx\Source\arm\startup_stm32f072.s)(0x617690EC)(--target=arm-arm-none-eabi -mcpu=cortex-m0 -masm=auto -c -gdwarf-4 -Wa,armasm,--pd,"__MICROLIB SETA 1" -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -Wa,armasm,--pd,"__UVISION_VERSION SETA 537" -Wa,armasm,--pd,"STM32F072xB SETA 1" -o ./objects/startup_stm32f072.o) +F (..\..\User\system_stm32f0xx.c)(0x6179F8C8)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/system_stm32f0xx.o -MD) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_adc.c)(0x616539D6)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_adc.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_can.c)(0x6179F8CA)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_can.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_cec.c)(0x616539DE)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_cec.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_comp.c)(0x616539E0)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_comp.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crc.c)(0x616539E4)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_crc.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crs.c)(0x616539E8)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_crs.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dac.c)(0x616539EA)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_dac.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dbgmcu.c)(0x616539EE)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_dbgmcu.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dma.c)(0x616539F2)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_dma.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_exti.c)(0x616539F4)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_exti.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_flash.c)(0x616539F8)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_flash.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_gpio.c)(0x616539FC)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_gpio.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_i2c.c)(0x616539FE)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_i2c.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_iwdg.c)(0x61653A02)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_iwdg.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_misc.c)(0x61653A06)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_misc.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_pwr.c)(0x61653A0A)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_pwr.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rcc.c)(0x6179F8CA)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_rcc.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rtc.c)(0x61653A12)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_rtc.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_spi.c)(0x61653A16)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_spi.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_syscfg.c)(0x61653A18)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_syscfg.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_tim.c)(0x61653A1C)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_tim.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_usart.c)(0x617A4934)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_usart.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_wwdg.c)(0x61653A24)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_wwdg.o -MD) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\User\main.c)(0x63526731)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/main.o -MD) +I (..\..\User\main.h)(0x6167D28C) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) +F (..\..\User\stm32f0xx_it.c)(0x61849FF4)(-xc -std=c11 --target=arm-arm-none-eabi -mcpu=cortex-m0 -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar -D__MICROLIB -gdwarf-4 -O2 -ffunction-sections -Wno-packed -Wno-missing-variable-declarations -Wno-missing-prototypes -Wno-missing-noreturn -Wno-sign-conversion -Wno-nonportable-include-path -Wno-reserved-id-macro -Wno-unused-macros -Wno-documentation-unknown-command -Wno-documentation -Wno-license-management -Wno-parentheses-equality -Wno-reserved-identifier -I ../../Libraries/CMSIS/Include -I ../../Libraries/CMSIS/Device/STM32F0xx/Include -I ../../Libraries/STM32F0xx_StdPeriph_Driver/inc -I ../../User -IC:/Users/qpeng/AppData/Local/Arm/Packs/Keil/STM32F0xx_DFP/2.1.1/Drivers/CMSIS/Device/ST/STM32F0xx/Include -D__UVISION_VERSION="537" -DSTM32F072xB -DSTM32F072 -DUSE_STDPERIPH_DRIVER -o ./objects/stm32f0xx_it.o -MD) +I (..\..\User\stm32f0xx_it.h)(0x6179F8C8) +I (..\..\User\main.h)(0x6167D28C) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h)(0x61839248) +I (..\..\Libraries\CMSIS\Include\core_cm0.h)(0x626F4ADE) +I (C:\Keil_v5\ARM\ARMCLANG\include\stdint.h)(0x625260D8) +I (..\..\Libraries\CMSIS\Include\cmsis_version.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_compiler.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Include\cmsis_armclang.h)(0x626F4ADE) +I (..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h)(0x617690EE) +I (..\..\User\stm32f0xx_conf.h)(0x6179F8C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h)(0x6165397C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h)(0x6165397E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h)(0x61653982) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h)(0x6165398A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h)(0x6165398C) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h)(0x61653984) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h)(0x61653990) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h)(0x61653996) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h)(0x6165399A) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h)(0x6165399E) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h)(0x616539A2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h)(0x616539A6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h)(0x616539C8) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h)(0x616539AA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h)(0x616539AC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h)(0x616539B6) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h)(0x616539BA) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h)(0x616539BE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h)(0x616539C2) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h)(0x616539CC) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h)(0x616539CE) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h)(0x616539D4) +I (..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h)(0x616539B0) diff --git a/Project/MDK/Objects/main.d b/Project/MDK/Objects/main.d new file mode 100644 index 0000000..2e96ad3 --- /dev/null +++ b/Project/MDK/Objects/main.d @@ -0,0 +1,32 @@ +./objects/main.o: ..\..\User\main.c ..\..\User\main.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/main.o b/Project/MDK/Objects/main.o new file mode 100644 index 0000000..d667d08 Binary files /dev/null and b/Project/MDK/Objects/main.o differ diff --git a/Project/MDK/Objects/startup_stm32f072.o b/Project/MDK/Objects/startup_stm32f072.o new file mode 100644 index 0000000..f7a6382 Binary files /dev/null and b/Project/MDK/Objects/startup_stm32f072.o differ diff --git a/Project/MDK/Objects/stm32f0xx_adc.d b/Project/MDK/Objects/stm32f0xx_adc.d new file mode 100644 index 0000000..fcdc95f --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_adc.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_adc.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_adc.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_adc.o b/Project/MDK/Objects/stm32f0xx_adc.o new file mode 100644 index 0000000..417c026 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_adc.o differ diff --git a/Project/MDK/Objects/stm32f0xx_can.d b/Project/MDK/Objects/stm32f0xx_can.d new file mode 100644 index 0000000..f7c0ed5 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_can.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_can.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_can.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_can.o b/Project/MDK/Objects/stm32f0xx_can.o new file mode 100644 index 0000000..baa9cfb Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_can.o differ diff --git a/Project/MDK/Objects/stm32f0xx_cec.d b/Project/MDK/Objects/stm32f0xx_cec.d new file mode 100644 index 0000000..66ad299 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_cec.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_cec.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_cec.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_cec.o b/Project/MDK/Objects/stm32f0xx_cec.o new file mode 100644 index 0000000..81926ee Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_cec.o differ diff --git a/Project/MDK/Objects/stm32f0xx_comp.d b/Project/MDK/Objects/stm32f0xx_comp.d new file mode 100644 index 0000000..6e0fc4e --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_comp.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_comp.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_comp.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_comp.o b/Project/MDK/Objects/stm32f0xx_comp.o new file mode 100644 index 0000000..b6d3ac3 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_comp.o differ diff --git a/Project/MDK/Objects/stm32f0xx_crc.d b/Project/MDK/Objects/stm32f0xx_crc.d new file mode 100644 index 0000000..28d6d81 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_crc.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_crc.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crc.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_crc.o b/Project/MDK/Objects/stm32f0xx_crc.o new file mode 100644 index 0000000..2041fc7 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_crc.o differ diff --git a/Project/MDK/Objects/stm32f0xx_crs.d b/Project/MDK/Objects/stm32f0xx_crs.d new file mode 100644 index 0000000..c3e8907 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_crs.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_crs.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crs.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_crs.o b/Project/MDK/Objects/stm32f0xx_crs.o new file mode 100644 index 0000000..6ad1729 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_crs.o differ diff --git a/Project/MDK/Objects/stm32f0xx_dac.d b/Project/MDK/Objects/stm32f0xx_dac.d new file mode 100644 index 0000000..267a705 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_dac.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_dac.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dac.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_dac.o b/Project/MDK/Objects/stm32f0xx_dac.o new file mode 100644 index 0000000..1017b75 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_dac.o differ diff --git a/Project/MDK/Objects/stm32f0xx_dbgmcu.d b/Project/MDK/Objects/stm32f0xx_dbgmcu.d new file mode 100644 index 0000000..cf124a9 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_dbgmcu.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_dbgmcu.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dbgmcu.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_dbgmcu.o b/Project/MDK/Objects/stm32f0xx_dbgmcu.o new file mode 100644 index 0000000..ae7ace8 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_dbgmcu.o differ diff --git a/Project/MDK/Objects/stm32f0xx_dma.d b/Project/MDK/Objects/stm32f0xx_dma.d new file mode 100644 index 0000000..c611ffb --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_dma.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_dma.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dma.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_dma.o b/Project/MDK/Objects/stm32f0xx_dma.o new file mode 100644 index 0000000..0c56670 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_dma.o differ diff --git a/Project/MDK/Objects/stm32f0xx_exti.d b/Project/MDK/Objects/stm32f0xx_exti.d new file mode 100644 index 0000000..9ade309 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_exti.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_exti.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_exti.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_exti.o b/Project/MDK/Objects/stm32f0xx_exti.o new file mode 100644 index 0000000..2b8e57f Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_exti.o differ diff --git a/Project/MDK/Objects/stm32f0xx_flash.d b/Project/MDK/Objects/stm32f0xx_flash.d new file mode 100644 index 0000000..60367dc --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_flash.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_flash.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_flash.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_flash.o b/Project/MDK/Objects/stm32f0xx_flash.o new file mode 100644 index 0000000..d028a0c Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_flash.o differ diff --git a/Project/MDK/Objects/stm32f0xx_gpio.d b/Project/MDK/Objects/stm32f0xx_gpio.d new file mode 100644 index 0000000..5d0beef --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_gpio.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_gpio.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_gpio.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_gpio.o b/Project/MDK/Objects/stm32f0xx_gpio.o new file mode 100644 index 0000000..65c350b Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_gpio.o differ diff --git a/Project/MDK/Objects/stm32f0xx_i2c.d b/Project/MDK/Objects/stm32f0xx_i2c.d new file mode 100644 index 0000000..ed30927 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_i2c.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_i2c.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_i2c.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_i2c.o b/Project/MDK/Objects/stm32f0xx_i2c.o new file mode 100644 index 0000000..54be726 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_i2c.o differ diff --git a/Project/MDK/Objects/stm32f0xx_it.d b/Project/MDK/Objects/stm32f0xx_it.d new file mode 100644 index 0000000..900c5d9 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_it.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_it.o: ..\..\User\stm32f0xx_it.c \ + ..\..\User\stm32f0xx_it.h ..\..\User\main.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_it.o b/Project/MDK/Objects/stm32f0xx_it.o new file mode 100644 index 0000000..b1ec5cc Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_it.o differ diff --git a/Project/MDK/Objects/stm32f0xx_iwdg.d b/Project/MDK/Objects/stm32f0xx_iwdg.d new file mode 100644 index 0000000..1006edf --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_iwdg.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_iwdg.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_iwdg.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_iwdg.o b/Project/MDK/Objects/stm32f0xx_iwdg.o new file mode 100644 index 0000000..c3bf0ac Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_iwdg.o differ diff --git a/Project/MDK/Objects/stm32f0xx_misc.d b/Project/MDK/Objects/stm32f0xx_misc.d new file mode 100644 index 0000000..f340b4f --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_misc.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_misc.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_misc.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h diff --git a/Project/MDK/Objects/stm32f0xx_misc.o b/Project/MDK/Objects/stm32f0xx_misc.o new file mode 100644 index 0000000..ea42034 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_misc.o differ diff --git a/Project/MDK/Objects/stm32f0xx_pwr.d b/Project/MDK/Objects/stm32f0xx_pwr.d new file mode 100644 index 0000000..0af4d6b --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_pwr.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_pwr.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_pwr.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_pwr.o b/Project/MDK/Objects/stm32f0xx_pwr.o new file mode 100644 index 0000000..402a45b Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_pwr.o differ diff --git a/Project/MDK/Objects/stm32f0xx_rcc.d b/Project/MDK/Objects/stm32f0xx_rcc.d new file mode 100644 index 0000000..a2ae161 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_rcc.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_rcc.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rcc.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_rcc.o b/Project/MDK/Objects/stm32f0xx_rcc.o new file mode 100644 index 0000000..1fc375c Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_rcc.o differ diff --git a/Project/MDK/Objects/stm32f0xx_rtc.d b/Project/MDK/Objects/stm32f0xx_rtc.d new file mode 100644 index 0000000..d185a4c --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_rtc.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_rtc.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rtc.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_rtc.o b/Project/MDK/Objects/stm32f0xx_rtc.o new file mode 100644 index 0000000..4905480 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_rtc.o differ diff --git a/Project/MDK/Objects/stm32f0xx_spi.d b/Project/MDK/Objects/stm32f0xx_spi.d new file mode 100644 index 0000000..468bc85 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_spi.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_spi.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_spi.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_spi.o b/Project/MDK/Objects/stm32f0xx_spi.o new file mode 100644 index 0000000..6e1ec6b Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_spi.o differ diff --git a/Project/MDK/Objects/stm32f0xx_syscfg.d b/Project/MDK/Objects/stm32f0xx_syscfg.d new file mode 100644 index 0000000..4ae25f1 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_syscfg.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_syscfg.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_syscfg.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_syscfg.o b/Project/MDK/Objects/stm32f0xx_syscfg.o new file mode 100644 index 0000000..509e08b Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_syscfg.o differ diff --git a/Project/MDK/Objects/stm32f0xx_tim.d b/Project/MDK/Objects/stm32f0xx_tim.d new file mode 100644 index 0000000..5752bd8 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_tim.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_tim.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_tim.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_tim.o b/Project/MDK/Objects/stm32f0xx_tim.o new file mode 100644 index 0000000..fa0174c Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_tim.o differ diff --git a/Project/MDK/Objects/stm32f0xx_usart.d b/Project/MDK/Objects/stm32f0xx_usart.d new file mode 100644 index 0000000..924ffe6 --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_usart.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_usart.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_usart.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_usart.o b/Project/MDK/Objects/stm32f0xx_usart.o new file mode 100644 index 0000000..18e3d64 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_usart.o differ diff --git a/Project/MDK/Objects/stm32f0xx_wwdg.d b/Project/MDK/Objects/stm32f0xx_wwdg.d new file mode 100644 index 0000000..e69ecbf --- /dev/null +++ b/Project/MDK/Objects/stm32f0xx_wwdg.d @@ -0,0 +1,33 @@ +./objects/stm32f0xx_wwdg.o: \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_wwdg.c \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/stm32f0xx_wwdg.o b/Project/MDK/Objects/stm32f0xx_wwdg.o new file mode 100644 index 0000000..0296371 Binary files /dev/null and b/Project/MDK/Objects/stm32f0xx_wwdg.o differ diff --git a/Project/MDK/Objects/system_stm32f0xx.d b/Project/MDK/Objects/system_stm32f0xx.d new file mode 100644 index 0000000..97de9a5 --- /dev/null +++ b/Project/MDK/Objects/system_stm32f0xx.d @@ -0,0 +1,32 @@ +./objects/system_stm32f0xx.o: ..\..\User\system_stm32f0xx.c \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\stm32f0xx.h \ + ..\..\Libraries\CMSIS\Include\core_cm0.h \ + C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \ + ..\..\Libraries\CMSIS\Include\cmsis_version.h \ + ..\..\Libraries\CMSIS\Include\cmsis_compiler.h \ + ..\..\Libraries\CMSIS\Include\cmsis_armclang.h \ + ..\..\Libraries\CMSIS\Device\STM32F0xx\Include\system_stm32f0xx.h \ + ..\..\User\stm32f0xx_conf.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_adc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_can.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_cec.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_crs.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_comp.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dac.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dbgmcu.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_dma.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_exti.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_flash.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_gpio.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_syscfg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_i2c.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_iwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_pwr.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rcc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_rtc.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_spi.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_tim.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_usart.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_wwdg.h \ + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc\stm32f0xx_misc.h diff --git a/Project/MDK/Objects/system_stm32f0xx.o b/Project/MDK/Objects/system_stm32f0xx.o new file mode 100644 index 0000000..34bddfc Binary files /dev/null and b/Project/MDK/Objects/system_stm32f0xx.o differ diff --git a/Project/MDK/Template.uvguix.qpeng b/Project/MDK/Template.uvguix.qpeng new file mode 100644 index 0000000..0b09d3a --- /dev/null +++ b/Project/MDK/Template.uvguix.qpeng @@ -0,0 +1,1887 @@ + + + + -6.1 + +
    ### uVision Project, (C) Keil Software
    + + + C:\Users\qpeng\Desktop\stm32\project\stm32f072\User + + + + + + + 38003 + Registers + 115 115 + + + 346 + Code Coverage + 665 160 + + + 204 + Performance Analyzer + 825 + + + + + + 35141 + Event Statistics + + 200 50 700 + + + 1506 + Symbols + + 57 57 57 + + + 1936 + Watch 1 + + 200 133 133 + + + 1937 + Watch 2 + + 200 133 133 + + + 1935 + Call Stack + Locals + + 200 133 133 + + + 2506 + Trace Data + + 75 135 130 95 70 230 200 150 + + + 466 + Source Browser + 500 + 300 + + + + + + + + 1 + 1 + 0 + 0 + -1 + + + + + + + 44 + 2 + 3 + + -1 + -1 + + + -1 + -1 + + + 78 + 16 + 1285 + 949 + + + + 0 + + 381 + 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 + + + + 0 + Build + + -1 + -1 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + AF0000004F000000F2030000C1000000 + + + 16 + AF00000066000000F2030000D8000000 + + + + 1005 + 1005 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 0300000066000000ED00000009020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 109 + 109 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 0300000066000000ED00000009020000 + + + 16 + 3C00000053000000060100001D020000 + + + + 1465 + 1465 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1466 + 1466 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1467 + 1467 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1468 + 1468 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1506 + 1506 + 0 + 0 + 0 + 0 + 32767 + 0 + 16384 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 1913 + 1913 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1935 + 1935 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 1936 + 1936 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 1937 + 1937 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 1939 + 1939 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1940 + 1940 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1941 + 1941 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 1942 + 1942 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 195 + 195 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 0300000066000000ED00000009020000 + + + 16 + 3C00000053000000060100001D020000 + + + + 196 + 196 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 0300000066000000ED00000009020000 + + + 16 + 3C00000053000000060100001D020000 + + + + 197 + 197 + 1 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 000000003A0200005805000036030000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 198 + 198 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 00000000A3010000F203000029020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 199 + 199 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 030000003D020000550500001D030000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 203 + 203 + 0 + 0 + 0 + 0 + 32767 + 0 + 8192 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 204 + 204 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 221 + 221 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000000000000000000000000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 2506 + 2506 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 2507 + 2507 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 343 + 343 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 346 + 346 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 35141 + 35141 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35824 + 35824 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 35885 + 35885 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35886 + 35886 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35887 + 35887 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35888 + 35888 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35889 + 35889 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35890 + 35890 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35891 + 35891 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35892 + 35892 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35893 + 35893 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35894 + 35894 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35895 + 35895 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35896 + 35896 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35897 + 35897 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35898 + 35898 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35899 + 35899 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35900 + 35900 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35901 + 35901 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35902 + 35902 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35903 + 35903 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35904 + 35904 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 35905 + 35905 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 38003 + 38003 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 0300000066000000ED00000009020000 + + + 16 + 3C00000053000000060100001D020000 + + + + 38007 + 38007 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 030000003D020000550500001D030000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 436 + 436 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 030000003D020000550500001D030000 + + + 16 + 3C00000053000000060100001D020000 + + + + 437 + 437 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 440 + 440 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 463 + 463 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 030000003D020000550500001D030000 + + + 16 + 3C00000053000000060100001D020000 + + + + 466 + 466 + 0 + 0 + 0 + 0 + 32767 + 0 + 32768 + 0 + + 16 + 030000003D020000550500001D030000 + + + 16 + 3C00000053000000060100001D020000 + + + + 470 + 470 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + B200000066000000EF030000A8000000 + + + 16 + 3C0000005300000035020000C5000000 + + + + 50000 + 50000 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50001 + 50001 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50002 + 50002 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50003 + 50003 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50004 + 50004 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50005 + 50005 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50006 + 50006 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50007 + 50007 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50008 + 50008 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50009 + 50009 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50010 + 50010 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50011 + 50011 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50012 + 50012 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50013 + 50013 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50014 + 50014 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50015 + 50015 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50016 + 50016 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50017 + 50017 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50018 + 50018 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 50019 + 50019 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 4A03000066000000EF0300009A010000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 59392 + 59392 + 1 + 0 + 0 + 0 + 966 + 0 + 8192 + 0 + + 16 + 0000000000000000D10300001C000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59393 + 0 + 1 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 00000000360300005805000049030000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59399 + 59399 + 1 + 0 + 0 + 0 + 476 + 0 + 8192 + 1 + + 16 + 000000001C000000E701000038000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 59400 + 59400 + 0 + 0 + 0 + 0 + 612 + 0 + 8192 + 2 + + 16 + 00000000380000006F02000054000000 + + + 16 + 0A0000000A0000006E0000006E000000 + + + + 824 + 824 + 0 + 0 + 0 + 0 + 32767 + 0 + 4096 + 0 + + 16 + 03000000BA010000EF03000010020000 + + + 16 + 3C00000053000000E7000000FB000000 + + + + 3312 + 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 + + + 59392 + File + + 2740 + 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 + + + 1423 + 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 + + + 1423 + 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 + + + + 59399 + Build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ebug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ser\main.c + 0 + 43 + 56 + 1 + + 0 + + + ..\..\Libraries\CMSIS\Include\core_cm0.h + 16 + 1 + 10 + 1 + + 0 + + + + +     diff --git a/Project/MDK/Template.uvoptx b/Project/MDK/Template.uvoptx new file mode 100644 index 0000000..e7ebb7b --- /dev/null +++ b/Project/MDK/Template.uvoptx @@ -0,0 +1,553 @@ + + + + 1.0 + +
    ### uVision Project, (C) Keil Software
    + + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc; *.md + *.plm + *.cpp; *.cc; *.cxx + 0 + + + + 0 + 0 + + + + Target 1 + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\Listings\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 3 + + + + + + + + + + + BIN\CMSIS_AGDI.dll + + + + 0 + CMSIS_AGDI + -X"Any" -UAny -O206 -S8 -C0 -P00000000 -N00("") -D00(00000000) -L00(0) -TO65554 -TC10000000 -TT10000000 -TP20 -TDS8009 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F0xx_128_2K.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F072RBTx$CMSIS\Flash\STM32F0xx_128_2K.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U30FF67065242383950221843 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F0xx_128_2K.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F072RBTx$CMSIS\Flash\STM32F0xx_128_2K.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F0xx_128_2K -FS08000000 -FL020000 -FP0($$Device:STM32F072RBTx$CMSIS\Flash\STM32F0xx_128_2K.FLM)) + + + + + 0 + + + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + STARTUP + 1 + 0 + 0 + 0 + + 1 + 1 + 2 + 0 + 0 + 0 + ..\..\Libraries\CMSIS\Device\STM32F0xx\Source\arm\startup_stm32f072.s + startup_stm32f072.s + 0 + 0 + + + + + CMSIS + 1 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + ..\..\User\system_stm32f0xx.c + system_stm32f0xx.c + 0 + 0 + + + + + FWLB + 0 + 0 + 0 + 0 + + 3 + 3 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_adc.c + stm32f0xx_adc.c + 0 + 0 + + + 3 + 4 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_can.c + stm32f0xx_can.c + 0 + 0 + + + 3 + 5 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_cec.c + stm32f0xx_cec.c + 0 + 0 + + + 3 + 6 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_comp.c + stm32f0xx_comp.c + 0 + 0 + + + 3 + 7 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crc.c + stm32f0xx_crc.c + 0 + 0 + + + 3 + 8 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crs.c + stm32f0xx_crs.c + 0 + 0 + + + 3 + 9 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dac.c + stm32f0xx_dac.c + 0 + 0 + + + 3 + 10 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dbgmcu.c + stm32f0xx_dbgmcu.c + 0 + 0 + + + 3 + 11 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dma.c + stm32f0xx_dma.c + 0 + 0 + + + 3 + 12 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_exti.c + stm32f0xx_exti.c + 0 + 0 + + + 3 + 13 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_flash.c + stm32f0xx_flash.c + 0 + 0 + + + 3 + 14 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_gpio.c + stm32f0xx_gpio.c + 0 + 0 + + + 3 + 15 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_i2c.c + stm32f0xx_i2c.c + 0 + 0 + + + 3 + 16 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_iwdg.c + stm32f0xx_iwdg.c + 0 + 0 + + + 3 + 17 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_misc.c + stm32f0xx_misc.c + 0 + 0 + + + 3 + 18 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_pwr.c + stm32f0xx_pwr.c + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rcc.c + stm32f0xx_rcc.c + 0 + 0 + + + 3 + 20 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rtc.c + stm32f0xx_rtc.c + 0 + 0 + + + 3 + 21 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_spi.c + stm32f0xx_spi.c + 0 + 0 + + + 3 + 22 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_syscfg.c + stm32f0xx_syscfg.c + 0 + 0 + + + 3 + 23 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_tim.c + stm32f0xx_tim.c + 0 + 0 + + + 3 + 24 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_usart.c + stm32f0xx_usart.c + 0 + 0 + + + 3 + 25 + 1 + 0 + 0 + 0 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_wwdg.c + stm32f0xx_wwdg.c + 0 + 0 + + + + + USER + 1 + 0 + 0 + 0 + + 4 + 26 + 1 + 0 + 0 + 0 + ..\..\User\main.c + main.c + 0 + 0 + + + 4 + 27 + 1 + 0 + 0 + 0 + ..\..\User\stm32f0xx_it.c + stm32f0xx_it.c + 0 + 0 + + + + + DOC + 0 + 0 + 0 + 0 + + +     diff --git a/Project/MDK/Template.uvprojx b/Project/MDK/Template.uvprojx new file mode 100644 index 0000000..2546956 --- /dev/null +++ b/Project/MDK/Template.uvprojx @@ -0,0 +1,552 @@ + + + + 2.1 + +
    ### uVision Project, (C) Keil Software
    + + + + Target 1 + 0x4 + ARM-ADS + 6180000::V6.18::ARMCLANG + 1 + + + STM32F072RBTx + STMicroelectronics + Keil.STM32F0xx_DFP.2.1.1 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00004000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F0xx_128_2K -FS08000000 -FL020000 -FP0($$Device:STM32F072RBTx$CMSIS\Flash\STM32F0xx_128_2K.FLM)) + 0 + $$Device:STM32F072RBTx$Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h + + + + + + + + + + $$Device:STM32F072RBTx$CMSIS\SVD\STM32F0x2.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\Objects\ + Template + 1 + 0 + 1 + 1 + 1 + .\Listings\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP + DARMCM1.DLL + -pCM0 + SARMCM3.DLL + + TARMCM1.DLL + -pCM0 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x4000 + + + 1 + 0x8000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x20000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x4000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 3 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 3 + 0 + 0 + 0 + 1 + 0 + 5 + 3 + 1 + 1 + 0 + 0 + 0 + + + STM32F072,USE_STDPERIPH_DRIVER + + ..\..\Libraries\CMSIS\Include;..\..\Libraries\CMSIS\Device\STM32F0xx\Include;..\..\Libraries\STM32F0xx_StdPeriph_Driver\inc;..\..\User + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + STARTUP + + + startup_stm32f072.s + 2 + ..\..\Libraries\CMSIS\Device\STM32F0xx\Source\arm\startup_stm32f072.s + + + + + CMSIS + + + system_stm32f0xx.c + 1 + ..\..\User\system_stm32f0xx.c + + + + + FWLB + + + stm32f0xx_adc.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_adc.c + + + stm32f0xx_can.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_can.c + + + stm32f0xx_cec.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_cec.c + + + stm32f0xx_comp.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_comp.c + + + stm32f0xx_crc.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crc.c + + + stm32f0xx_crs.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_crs.c + + + stm32f0xx_dac.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dac.c + + + stm32f0xx_dbgmcu.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dbgmcu.c + + + stm32f0xx_dma.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_dma.c + + + stm32f0xx_exti.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_exti.c + + + stm32f0xx_flash.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_flash.c + + + stm32f0xx_gpio.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_gpio.c + + + stm32f0xx_i2c.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_i2c.c + + + stm32f0xx_iwdg.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_iwdg.c + + + stm32f0xx_misc.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_misc.c + + + stm32f0xx_pwr.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_pwr.c + + + stm32f0xx_rcc.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rcc.c + + + stm32f0xx_rtc.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_rtc.c + + + stm32f0xx_spi.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_spi.c + + + stm32f0xx_syscfg.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_syscfg.c + + + stm32f0xx_tim.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_tim.c + + + stm32f0xx_usart.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_usart.c + + + stm32f0xx_wwdg.c + 1 + ..\..\Libraries\STM32F0xx_StdPeriph_Driver\src\stm32f0xx_wwdg.c + + + + + USER + + + main.c + 1 + ..\..\User\main.c + + + stm32f0xx_it.c + 1 + ..\..\User\stm32f0xx_it.c + + + + + DOC + + + + + + + + + + + +     diff --git a/User/main.c b/User/main.c new file mode 100644 index 0000000..753ed5d --- /dev/null +++ b/User/main.c @@ -0,0 +1,155 @@ +/** + ****************************************************************************** + * @file GPIO/GPIO_IOToggle/main.c + * @author MCD Application Team + * @version V1.6.0 + * @date 13-October-2021 + * @brief Main program body + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/** @addtogroup STM32F0xx_StdPeriph_Examples + * @{ + */ + +/** @addtogroup GPIO_IOToggle + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define BSRR_VAL 0x0C00 + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +GPIO_InitTypeDef GPIO_InitStructure; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Main program. + * @param None + * @retval None + */ +int main(void) +{ + /*!< At this stage the microcontroller clock setting is already configured, + this is done through SystemInit() function which is called from startup + file (startup_stm32f0xx.s) before to branch to application main. + To reconfigure the default setting of SystemInit() function, refer to + system_stm32f0xx.c file + */ + + /* GPIOC Periph clock enable */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOC, ENABLE); + + /* Configure PC10 and PC11 in output pushpull mode */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(GPIOC, &GPIO_InitStructure); + + /* To achieve GPIO toggling maximum frequency, the following sequence is mandatory. + You can monitor PC10 and PC11 on the scope to measure the output signal. + If you need to fine tune this frequency, you can add more GPIO set/reset + cycles to minimize more the infinite loop timing. + This code needs to be compiled with high speed optimization option. */ + while (1) + { + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + + /* Set PC10 and PC11 */ + GPIOC->BSRR = BSRR_VAL; + /* Reset PC10 and PC11 */ + GPIOC->BRR = BSRR_VAL; + } +} + +#ifdef USE_FULL_ASSERT + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + { + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + diff --git a/User/main.h b/User/main.h new file mode 100644 index 0000000..9f2d1f6 --- /dev/null +++ b/User/main.h @@ -0,0 +1,34 @@ +/** + ****************************************************************************** + * @file GPIO/GPIO_IOToggle/main.h + * @author MCD Application Team + * @version V1.6.0 + * @date 13-October-2021 + * @brief Header for main.c module + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +#endif /* __MAIN_H */ + diff --git a/User/stm32f0xx_conf.h b/User/stm32f0xx_conf.h new file mode 100644 index 0000000..7be2949 --- /dev/null +++ b/User/stm32f0xx_conf.h @@ -0,0 +1,75 @@ +/** + ****************************************************************************** + * @file Project/STM32F0xx_StdPeriph_Templates/stm32f0xx_conf.h + * @author MCD Application Team + * @version V1.6.0 + * @date 13-October-2021 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_CONF_H +#define __STM32F0XX_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Comment the line below to disable peripheral header file inclusion */ +#include "stm32f0xx_adc.h" +#include "stm32f0xx_can.h" +#include "stm32f0xx_cec.h" +#include "stm32f0xx_crc.h" +#include "stm32f0xx_crs.h" +#include "stm32f0xx_comp.h" +#include "stm32f0xx_dac.h" +#include "stm32f0xx_dbgmcu.h" +#include "stm32f0xx_dma.h" +#include "stm32f0xx_exti.h" +#include "stm32f0xx_flash.h" +#include "stm32f0xx_gpio.h" +#include "stm32f0xx_syscfg.h" +#include "stm32f0xx_i2c.h" +#include "stm32f0xx_iwdg.h" +#include "stm32f0xx_pwr.h" +#include "stm32f0xx_rcc.h" +#include "stm32f0xx_rtc.h" +#include "stm32f0xx_spi.h" +#include "stm32f0xx_tim.h" +#include "stm32f0xx_usart.h" +#include "stm32f0xx_wwdg.h" +#include "stm32f0xx_misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function which reports + * the name of the source file and the source line number of the call + * that failed. If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F0XX_CONF_H */ + diff --git a/User/stm32f0xx_it.c b/User/stm32f0xx_it.c new file mode 100644 index 0000000..28085c8 --- /dev/null +++ b/User/stm32f0xx_it.c @@ -0,0 +1,110 @@ +/** + ****************************************************************************** + * @file Project/STM32F0xx_StdPeriph_Templates/stm32f0xx_it.c + * @author MCD Application Team + * @version V1.6.0 + * @date 13-October-2021 + * @brief Main Interrupt Service Routines. + * This file provides template for all exceptions handler and + * peripherals interrupt service routine. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_it.h" + +/** @addtogroup STM32F0xx_StdPeriph_Templates + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************/ +/* Cortex-M0 Processor Exceptions Handlers */ +/******************************************************************************/ + +/** + * @brief This function handles NMI exception. + * @param None + * @retval None + */ +void NMI_Handler(void) +{ +} + +/** + * @brief This function handles Hard Fault exception. + * @param None + * @retval None + */ +void HardFault_Handler(void) +{ + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles SVCall exception. + * @param None + * @retval None + */ +void SVC_Handler(void) +{ +} + +/** + * @brief This function handles PendSVC exception. + * @param None + * @retval None + */ +void PendSV_Handler(void) +{ +} + +/** + * @brief This function handles SysTick Handler. + * @param None + * @retval None + */ +void SysTick_Handler(void) +{ +} + +/******************************************************************************/ +/* STM32F0xx Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32f0xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles PPP interrupt request. + * @param None + * @retval None + */ +/*void PPP_IRQHandler(void) +{ +}*/ + +/** + * @} + */ + + diff --git a/User/stm32f0xx_it.h b/User/stm32f0xx_it.h new file mode 100644 index 0000000..3988fb9 --- /dev/null +++ b/User/stm32f0xx_it.h @@ -0,0 +1,50 @@ +/** + ****************************************************************************** + * @file Project/STM32F0xx_StdPeriph_Templates/stm32f0xx_it.h + * @author MCD Application Team + * @version V1.6.0 + * @date 13-October-2021 + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_IT_H +#define __STM32F0XX_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void NMI_Handler(void); +void HardFault_Handler(void); +void SVC_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); + +/*void PPP_IRQHandler(void);*/ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_IT_H */ + diff --git a/User/system_stm32f0xx.c b/User/system_stm32f0xx.c new file mode 100644 index 0000000..5cf78e1 --- /dev/null +++ b/User/system_stm32f0xx.c @@ -0,0 +1,352 @@ +/** + ****************************************************************************** + * @file system_stm32f0xx.c + * @author MCD Application Team + * @version V1.6.0 + * @date 13-October-2021 + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File. + * This file contains the system clock configuration for STM32F0xx devices, + * and is generated by the clock configuration tool + * STM32F0xx_Clock_Configuration_V1.0.1.xls + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * and Divider factors, AHB/APBx prescalers and Flash settings), + * depending on the configuration made in the clock xls tool. + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz Range) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" define + * in "stm32f0xx.h" file. When HSE is used as system clock source, directly or + * through PLL, and you are using different crystal you have to adapt the HSE + * value to your own configuration. + * + * 5. This file configures the system clock as follows: + *============================================================================= + *============================================================================= + * System Clock source | PLL(HSE) + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 48000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 48000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB Prescaler | 1 + *----------------------------------------------------------------------------- + * HSE Frequency(Hz) | 8000000 + *---------------------------------------------------------------------------- + * PLLMUL | 6 + *----------------------------------------------------------------------------- + * PREDIV | 1 + *----------------------------------------------------------------------------- + * Flash Latency(WS) | 1 + *----------------------------------------------------------------------------- + * Prefetch Buffer | ON + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + * Copyright (c) 2014 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** @addtogroup STM32F0xx_System_Private_Includes + * @{ + */ + +#include "stm32f0xx.h" + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Defines + * @{ + */ +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Variables + * @{ + */ +uint32_t SystemCoreClock = 48000000; +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + +#if defined(STM32F051) + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE and MCOSEL[2:0] bits */ + RCC->CFGR &= (uint32_t)0xF8FFB80C; +#else + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, MCOSEL[2:0], MCOPRE[2:0] and PLLNODIV bits */ + RCC->CFGR &= (uint32_t)0x08FFB80C; +#endif /* STM32F051 */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + RCC->CFGR &= (uint32_t)0xFFC0FFFF; + + /* Reset PREDIV1[3:0] bits */ + RCC->CFGR2 &= (uint32_t)0xFFFFFFF0; + + /* Reset USARTSW[1:0], I2CSW, CECSW and ADCSW bits */ + RCC->CFGR3 &= (uint32_t)0xFFFFFEAC; + + /* Reset HSI14 bit */ + RCC->CR2 &= (uint32_t)0xFFFFFFFE; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + + /* Configure the System clock frequency, AHB/APBx prescalers and Flash settings */ + SetSysClock(); +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f0xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f0xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, prediv1factor = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + break; + default: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, AHB/APBx prescalers and Flash + * settings. + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +static void SetSysClock(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ + + /* SYSCLK, HCLK, PCLK configuration ----------------------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer and set Flash Latency */ + FLASH->ACR = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE_DIV1; + + /* PLL configuration */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL6); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +