274 lines
12 KiB
C
274 lines
12 KiB
C
/*
|
||
* @Description:
|
||
* @Date: 2020-04-17 13:16:16
|
||
* @LastEditors: CK.Zh
|
||
* @LastEditTime: 2021-01-07 18:00:29
|
||
* @FilePath: \NaviKit_stm32\Core\Src\navikit.c
|
||
*/
|
||
/*
|
||
* navikit.c
|
||
*
|
||
* Created on: Apr 17, 2020
|
||
* Author: oarap
|
||
*/
|
||
|
||
#define LOG_TAG "NAVIKIT"
|
||
|
||
#include "navikit.h"
|
||
#include "cmsis_os2.h" // ::CMSIS:RTOS2
|
||
|
||
NaviKit_t NaviKit;
|
||
|
||
void NaviKit_var_init()
|
||
{
|
||
NaviKit.sys.sta = idle;
|
||
NaviKit.sys.next_sta = idle;
|
||
NaviKit.pmb.main_pwr_good = true;
|
||
}
|
||
|
||
void TaskBeep(uint32_t time_ms , uint8_t n)
|
||
{
|
||
for(uint8_t i=0;i<n;i++){
|
||
PWR_Enable_IRQ(SYS_SRC_BUZZ, true, time_ms>>1);//equal "time divided by 2"
|
||
PWR_Enable_IRQ(SYS_SRC_BUZZ, false, time_ms>>1);//equal "time divided by 2"
|
||
// HAL_GPIO_WritePin(SYS_BUZZ_CTL_GPIO_Port,SYS_BUZZ_CTL_Pin, GPIO_PIN_RESET);
|
||
// osDelay(time_ms>>1);//equal "time divided by 2"
|
||
// HAL_GPIO_WritePin(SYS_BUZZ_CTL_GPIO_Port,SYS_BUZZ_CTL_Pin, GPIO_PIN_SET);
|
||
// osDelay(time_ms>>1);//equal "time divided by 2"
|
||
}
|
||
}
|
||
|
||
|
||
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
|
||
{
|
||
if(hadc->Instance == ADC1)
|
||
{
|
||
// ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 /* ADC internal channel (no connection on device pin) */
|
||
// ADC_CHANNEL_VREFINT ADC_CHANNEL_17 /* ADC internal channel (no connection on device pin) */
|
||
float adc_17_voltage = (float)1.2 / NaviKit.pmb.rails.adc[1];//reference voltage
|
||
|
||
NaviKit.pmb.rails.out_24v = (float)(adc_17_voltage * NaviKit.pmb.rails.adc[2] * 16);
|
||
NaviKit.pmb.rails.out_5v = (float)(adc_17_voltage * NaviKit.pmb.rails.adc[3] * 8);
|
||
NaviKit.pmb.rails.out_12v = (float)(adc_17_voltage * NaviKit.pmb.rails.adc[4] * 8);
|
||
NaviKit.pmb.rails.bkp_bat = (float)(adc_17_voltage * NaviKit.pmb.rails.adc[5] * 8);
|
||
NaviKit.pmb.rails.main_pwr = (float)(adc_17_voltage * NaviKit.pmb.rails.adc[6] * 16);
|
||
}
|
||
}
|
||
|
||
//温度变化较大时将触发看门狗，进行校准
|
||
void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
|
||
{
|
||
// HAL_ADCEx_Calibration_Start(&hadc1);
|
||
}
|
||
|
||
|
||
void enter_standby_state(uint16_t delay){
|
||
log_i("EC enter to STANDBY Mode to save power, see you!");
|
||
osDelay(delay);
|
||
HAL_PWR_EnableWakeUpPin(PWR_WAKEUP_PIN1);//Enable PA0 wakeup function
|
||
__HAL_RCC_RTC_DISABLE();
|
||
HAL_RCC_DeInit();
|
||
HAL_PWR_EnterSTANDBYMode();
|
||
}
|
||
void enter_isp_state()
|
||
{
|
||
//write "bios update flag" to bkp register, and reset system
|
||
ISP_Prepare();
|
||
}
|
||
|
||
//timeout:the time of wait
|
||
void enter_idle_state(uint16_t interval){
|
||
log_i("Enter to idle state.");
|
||
TaskBeep(50,1);
|
||
|
||
PWR_Enable(SOM_SLEEP,true,interval);
|
||
|
||
PWR_Enable(USB3_Port4,false, interval);
|
||
PWR_Enable(USB3_Port3,false, interval);
|
||
PWR_Enable(USB3_Port2,false, interval);
|
||
PWR_Enable(USB3_Port1,false, interval);
|
||
PWR_Enable(USB3_Port6,false, interval);
|
||
PWR_Enable(USB3_Port5,false, interval);
|
||
|
||
PWR_Enable(USB2_Port6,false, interval);
|
||
PWR_Enable(USB2_Port5,false, interval);
|
||
PWR_Enable(USB2_Port4,false, interval);
|
||
PWR_Enable(USB2_Port3,false, interval);
|
||
PWR_Enable(USB2_Port2,false, interval);
|
||
PWR_Enable(USB2_Port1,false, interval);
|
||
|
||
PWR_Enable(SOC_USB3_HUB ,false, interval);
|
||
PWR_Enable(SOC_USB2_HUB ,false, interval);
|
||
PWR_Enable(SOC_USB3_HOST,false, interval);
|
||
PWR_Enable(SOC_USB3_GEC ,false, interval);
|
||
PWR_Enable(SOC_GE_SW ,false, interval);
|
||
|
||
PWR_Enable(SYS_FAN1 ,false , interval);
|
||
PWR_Enable(SYS_FAN2 ,false , interval);
|
||
PWR_Enable(SYS_FAN3 ,false , interval);
|
||
|
||
PWR_Enable(SOM_PWR_EN ,false, interval);
|
||
|
||
PWR_Enable(PMB_PS_ON ,false , 0);
|
||
}
|
||
|
||
void enter_run_state(uint16_t interval)
|
||
{
|
||
log_i("Enter to run state");
|
||
TaskBeep(200,1);
|
||
|
||
PWR_Enable(PMB_PS_ON ,true, interval);
|
||
|
||
PWR_Enable(SOM_DFU ,false, 0); //disable dfu pin
|
||
PWR_Enable(SOM_RESET , false , 0); //disable reset pin
|
||
|
||
PWR_Enable(SYS_FAN1 ,true , interval);
|
||
PWR_Enable(SYS_FAN2 ,true , interval);
|
||
PWR_Enable(SYS_FAN3 ,true , interval);
|
||
|
||
PWR_Enable(SOM_PWR_EN , true , interval);
|
||
|
||
PWR_Enable(SOC_USB3_HUB ,true , interval);
|
||
PWR_Enable(SOC_USB2_HUB ,true , interval);
|
||
PWR_Enable(SOC_USB3_HOST,true , interval);
|
||
PWR_Enable(SOC_USB3_GEC ,true , interval);
|
||
PWR_Enable(SOC_GE_SW ,true , interval);
|
||
|
||
PWR_Enable(USB2_Port1,true , interval);
|
||
PWR_Enable(USB2_Port2,true , interval);
|
||
PWR_Enable(USB2_Port3,true , interval);
|
||
PWR_Enable(USB2_Port4,true , interval);
|
||
PWR_Enable(USB2_Port5,true , interval);
|
||
PWR_Enable(USB2_Port6,true , interval);
|
||
|
||
PWR_Enable(USB3_Port5,true , interval);
|
||
PWR_Enable(USB3_Port6,true , interval);
|
||
PWR_Enable(USB3_Port1,true , interval);
|
||
PWR_Enable(USB3_Port2,true , interval);
|
||
PWR_Enable(USB3_Port3,true , interval);
|
||
PWR_Enable(USB3_Port4,true , interval);
|
||
|
||
}
|
||
void enter_sleep_state(uint16_t interval)
|
||
{
|
||
log_i("Enter to sleep state.");
|
||
TaskBeep(50,1);
|
||
}
|
||
void enter_dfu_state(uint16_t interval)
|
||
{
|
||
|
||
log_i("Enter to DFU state.");
|
||
TaskBeep(500,3);
|
||
|
||
PWR_Enable(PMB_PS_ON , true , interval);
|
||
|
||
PWR_Enable(SOM_DFU , true , 0);
|
||
PWR_Enable(SOM_RESET , false , 0); //disable reset pin
|
||
|
||
PWR_Enable(SYS_FAN1 , true , interval);
|
||
PWR_Enable(SYS_FAN2 , true , interval);
|
||
PWR_Enable(SYS_FAN3 , true , interval);
|
||
|
||
PWR_Enable(SOM_PWR_EN , true , interval);
|
||
|
||
}
|
||
//para, interval：reset low level signal duration (ms)
|
||
void som_reboot(uint16_t interval){
|
||
log_i("Jetson Nano rebooting...");
|
||
PWR_Enable(SOM_RESET,true,0);
|
||
TaskBeep(100,1);
|
||
PWR_Enable(SOM_RESET,false,0);
|
||
}
|
||
|
||
void PWR_Enable(enum Device_t device,bool en,uint16_t delay){
|
||
bool result = false;
|
||
result = PWR_Enable_IRQ(device,en,0);
|
||
if(result){
|
||
log_v("Device 0x%02X -> %s",device,(en == true) ? "[ON]" : "[OFF]");
|
||
osDelay(delay);
|
||
}else{
|
||
log_e("Power_Enable device parameter is invalid!");
|
||
}
|
||
}
|
||
|
||
//PWR_Enable_IRQ：for interrupt safe reversion
|
||
//device power enable or disable
|
||
//device: Specified device
|
||
//en: enable or disable
|
||
//delay: After executing the operation delay (ms)
|
||
//return: true-success;false-parameter valid
|
||
bool PWR_Enable_IRQ(enum Device_t device,bool en,uint16_t delay){
|
||
switch (device){
|
||
case USB2_Port1: {HAL_GPIO_WritePin(USB2_VBUS_CTL_1_GPIO_Port, USB2_VBUS_CTL_1_Pin, en); }break;
|
||
case USB2_Port2: {HAL_GPIO_WritePin(USB2_VBUS_CTL_2_GPIO_Port, USB2_VBUS_CTL_2_Pin, en); }break;
|
||
case USB2_Port3: {HAL_GPIO_WritePin(USB2_VBUS_CTL_3_GPIO_Port, USB2_VBUS_CTL_3_Pin, en); }break;
|
||
case USB2_Port4: {HAL_GPIO_WritePin(USB2_VBUS_CTL_4_GPIO_Port, USB2_VBUS_CTL_4_Pin, en); }break;
|
||
case USB2_Port5: {HAL_GPIO_WritePin(USB2_VBUS_CTL_5_GPIO_Port, USB2_VBUS_CTL_5_Pin, en); }break;
|
||
case USB2_Port6: {HAL_GPIO_WritePin(USB2_VBUS_CTL_6_GPIO_Port, USB2_VBUS_CTL_6_Pin, en); }break;
|
||
case USB3_Port1: {HAL_GPIO_WritePin(USB3_VBUS_CTL_1_GPIO_Port, USB3_VBUS_CTL_1_Pin, en); }break;
|
||
case USB3_Port2: {HAL_GPIO_WritePin(USB3_VBUS_CTL_2_GPIO_Port, USB3_VBUS_CTL_2_Pin, en); }break;
|
||
case USB3_Port3: {HAL_GPIO_WritePin(USB3_VBUS_CTL_3_GPIO_Port, USB3_VBUS_CTL_3_Pin, en); }break;
|
||
case USB3_Port4: {HAL_GPIO_WritePin(USB3_VBUS_CTL_4_GPIO_Port, USB3_VBUS_CTL_4_Pin, en); }break;
|
||
case USB3_Port5: {HAL_GPIO_WritePin(USB3_VBUS_CTL_5_GPIO_Port, USB3_VBUS_CTL_5_Pin, en); }break;
|
||
case USB3_Port6: {HAL_GPIO_WritePin(USB3_VBUS_CTL_6_GPIO_Port, USB3_VBUS_CTL_6_Pin, en); }break;
|
||
case SOC_USB2_HUB: {HAL_GPIO_WritePin(SOC_U2_HUB_PWR_CTL_GPIO_Port,SOC_U2_HUB_PWR_CTL_Pin, en); }break;
|
||
case SOC_USB3_HUB: {HAL_GPIO_WritePin(SOC_U3_HUB_PWR_CTL_GPIO_Port,SOC_U3_HUB_PWR_CTL_Pin, en); }break;
|
||
case SOC_USB3_HOST: {HAL_GPIO_WritePin(SOC_U3_HOST_PWR_CTL_GPIO_Port,SOC_U3_HOST_PWR_CTL_Pin, en); }break;
|
||
case SOC_USB3_GEC: {HAL_GPIO_WritePin(SOC_U3_GEC_PWR_CTL_GPIO_Port,SOC_U3_GEC_PWR_CTL_Pin, en); }break;
|
||
case SOC_GE_SW: {HAL_GPIO_WritePin(SOC_GE_SW_PWR_CTL_GPIO_Port, SOC_GE_SW_PWR_CTL_Pin, en); }break;
|
||
case SYS_FAN1: {HAL_GPIO_WritePin(SYS_FAN_CTL_1_GPIO_Port, SYS_FAN_CTL_1_Pin, en); }break;
|
||
case SYS_FAN2: {HAL_GPIO_WritePin(SYS_FAN_CTL_2_GPIO_Port, SYS_FAN_CTL_2_Pin, en); }break;
|
||
case SYS_FAN3: {HAL_GPIO_WritePin(SYS_FAN_CTL_3_GPIO_Port, SYS_FAN_CTL_3_Pin, en); }break;
|
||
case SYS_RUN_LED: {HAL_GPIO_WritePin(SYS_RUN_LED_CTL_GPIO_Port, SYS_RUN_LED_CTL_Pin, !en); }break;
|
||
case SYS_PWR_LED: {HAL_GPIO_WritePin(SYS_POWER_LED_CTL_GPIO_Port, SYS_POWER_LED_CTL_Pin, !en); }break;
|
||
case SYS_SRC_BUZZ: {HAL_GPIO_WritePin(SYS_BUZZ_CTL_GPIO_Port, SYS_BUZZ_CTL_Pin, !en); }break;
|
||
case SOM_PWR_EN: {HAL_GPIO_WritePin(SOM_POWER_EN_GPIO_Port, SOM_POWER_EN_Pin, en); }break;
|
||
case SOM_DFU: {HAL_GPIO_WritePin(SOM_FORCE_RECOVERY_GPIO_Port,SOM_FORCE_RECOVERY_Pin, !en); }break;
|
||
case SOM_RESET: {HAL_GPIO_WritePin(SOM_SYS_RESET_GPIO_Port, SOM_SYS_RESET_Pin, !en); }break;
|
||
case SOM_SLEEP: {HAL_GPIO_WritePin(SOM_SLEEP_WAKE_GPIO_Port, SOM_SLEEP_WAKE_Pin, !en); }break;
|
||
case PMB_PS_ON: {HAL_GPIO_WritePin(PMB_PS_ON_GPIO_Port, PMB_PS_ON_Pin, en); }break;
|
||
default: {return false; }break;
|
||
}
|
||
osDelay(delay);
|
||
return true;
|
||
}
|
||
|
||
//check device on board power status
|
||
bool PWR_Status(enum Device_t device){
|
||
bool sta = false;
|
||
switch (device){
|
||
case USB2_Port1: {sta = HAL_GPIO_ReadPin(USB2_VBUS_CTL_1_GPIO_Port,USB2_VBUS_CTL_1_Pin); }break;
|
||
case USB2_Port2: {sta = HAL_GPIO_ReadPin(USB2_VBUS_CTL_2_GPIO_Port,USB2_VBUS_CTL_2_Pin); }break;
|
||
case USB2_Port3: {sta = HAL_GPIO_ReadPin(USB2_VBUS_CTL_3_GPIO_Port,USB2_VBUS_CTL_3_Pin); }break;
|
||
case USB2_Port4: {sta = HAL_GPIO_ReadPin(USB2_VBUS_CTL_4_GPIO_Port,USB2_VBUS_CTL_4_Pin); }break;
|
||
case USB2_Port5: {sta = HAL_GPIO_ReadPin(USB2_VBUS_CTL_5_GPIO_Port,USB2_VBUS_CTL_5_Pin); }break;
|
||
case USB2_Port6: {sta = HAL_GPIO_ReadPin(USB2_VBUS_CTL_6_GPIO_Port,USB2_VBUS_CTL_6_Pin); }break;
|
||
case USB3_Port1: {sta = HAL_GPIO_ReadPin(USB3_VBUS_CTL_1_GPIO_Port,USB3_VBUS_CTL_1_Pin); }break;
|
||
case USB3_Port2: {sta = HAL_GPIO_ReadPin(USB3_VBUS_CTL_2_GPIO_Port,USB3_VBUS_CTL_2_Pin); }break;
|
||
case USB3_Port3: {sta = HAL_GPIO_ReadPin(USB3_VBUS_CTL_3_GPIO_Port,USB3_VBUS_CTL_3_Pin); }break;
|
||
case USB3_Port4: {sta = HAL_GPIO_ReadPin(USB3_VBUS_CTL_4_GPIO_Port,USB3_VBUS_CTL_4_Pin); }break;
|
||
case USB3_Port5: {sta = HAL_GPIO_ReadPin(USB3_VBUS_CTL_5_GPIO_Port,USB3_VBUS_CTL_5_Pin); }break;
|
||
case USB3_Port6: {sta = HAL_GPIO_ReadPin(USB3_VBUS_CTL_6_GPIO_Port,USB3_VBUS_CTL_6_Pin); }break;
|
||
case SOC_USB2_HUB: {sta = HAL_GPIO_ReadPin(SOC_U2_HUB_PWR_CTL_GPIO_Port,SOC_U2_HUB_PWR_CTL_Pin); }break;
|
||
case SOC_USB3_HUB: {sta = HAL_GPIO_ReadPin(SOC_U3_HUB_PWR_CTL_GPIO_Port,SOC_U3_HUB_PWR_CTL_Pin); }break;
|
||
case SOC_USB3_HOST: {sta = HAL_GPIO_ReadPin(SOC_U3_HOST_PWR_CTL_GPIO_Port,SOC_U3_HOST_PWR_CTL_Pin); }break;
|
||
case SOC_USB3_GEC: {sta = HAL_GPIO_ReadPin(SOC_U3_GEC_PWR_CTL_GPIO_Port,SOC_U3_GEC_PWR_CTL_Pin); }break;
|
||
case SOC_GE_SW: {sta = HAL_GPIO_ReadPin(SOC_GE_SW_PWR_CTL_GPIO_Port,SOC_GE_SW_PWR_CTL_Pin); }break;
|
||
case SYS_FAN1: {sta = HAL_GPIO_ReadPin(SYS_FAN_CTL_1_GPIO_Port,SYS_FAN_CTL_1_Pin); }break;
|
||
case SYS_FAN2: {sta = HAL_GPIO_ReadPin(SYS_FAN_CTL_2_GPIO_Port,SYS_FAN_CTL_2_Pin); }break;
|
||
case SYS_FAN3: {sta = HAL_GPIO_ReadPin(SYS_FAN_CTL_3_GPIO_Port,SYS_FAN_CTL_3_Pin); }break;
|
||
case SYS_RUN_LED: {sta = !HAL_GPIO_ReadPin(SYS_RUN_LED_CTL_GPIO_Port,SYS_RUN_LED_CTL_Pin); }break;
|
||
case SYS_PWR_LED: {sta = !HAL_GPIO_ReadPin(SYS_POWER_LED_CTL_GPIO_Port,SYS_POWER_LED_CTL_Pin); }break;
|
||
case SYS_SRC_BUZZ :{sta = !HAL_GPIO_ReadPin(SYS_BUZZ_CTL_GPIO_Port,SYS_BUZZ_CTL_Pin); }break;
|
||
case SOM_PWR_EN: {sta = HAL_GPIO_ReadPin(SOM_POWER_EN_GPIO_Port,SOM_POWER_EN_Pin); }break;
|
||
case SOM_DFU: {sta = !HAL_GPIO_ReadPin(SOM_FORCE_RECOVERY_GPIO_Port,SOM_FORCE_RECOVERY_Pin); }break;
|
||
case SOM_RESET: {sta = !HAL_GPIO_ReadPin(SOM_SYS_RESET_GPIO_Port,SOM_SYS_RESET_Pin); }break;
|
||
case SOM_SLEEP: {sta = !HAL_GPIO_ReadPin(SOM_SLEEP_WAKE_GPIO_Port,SOM_SLEEP_WAKE_Pin); }break;
|
||
case PMB_PS_ON: {sta = HAL_GPIO_ReadPin(PMB_PS_ON_GPIO_Port,PMB_PS_ON_Pin); }break;
|
||
default: {log_e("PWR_Status device parameter is invalid."); }break;
|
||
}
|
||
return sta;
|
||
}
|
||
|
||
|