608 lines
32 KiB
C
608 lines
32 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-12-11 Bernard first version
|
|
*/
|
|
|
|
#ifndef __S3C24X0_H__
|
|
#define __S3C24X0_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include <rtthread.h>
|
|
|
|
/**
|
|
* @addtogroup S3C24X0
|
|
*/
|
|
/*@{*/
|
|
|
|
// Memory control
|
|
#define BWSCON (*(volatile unsigned *)0x48000000) //Bus width & wait status
|
|
#define BANKCON0 (*(volatile unsigned *)0x48000004) //Boot ROM control
|
|
#define BANKCON1 (*(volatile unsigned *)0x48000008) //BANK1 control
|
|
#define BANKCON2 (*(volatile unsigned *)0x4800000c) //BANK2 cControl
|
|
#define BANKCON3 (*(volatile unsigned *)0x48000010) //BANK3 control
|
|
#define BANKCON4 (*(volatile unsigned *)0x48000014) //BANK4 control
|
|
#define BANKCON5 (*(volatile unsigned *)0x48000018) //BANK5 control
|
|
#define BANKCON6 (*(volatile unsigned *)0x4800001c) //BANK6 control
|
|
#define BANKCON7 (*(volatile unsigned *)0x48000020) //BANK7 control
|
|
#define REFRESH (*(volatile unsigned *)0x48000024) //DRAM/SDRAM efresh
|
|
#define BANKSIZE (*(volatile unsigned *)0x48000028) //Flexible Bank Size
|
|
#define MRSRB6 (*(volatile unsigned *)0x4800002c) //Mode egister set for SDRAM
|
|
#define MRSRB7 (*(volatile unsigned *)0x48000030) //Mode egister set for SDRAM
|
|
|
|
|
|
// USB Host
|
|
|
|
|
|
// INTERRUPT
|
|
#define SRCPND (*(volatile unsigned *)0x4a000000) //Interrupt request status
|
|
#define INTMOD (*(volatile unsigned *)0x4a000004) //Interrupt mode control
|
|
#define INTMSK (*(volatile unsigned *)0x4a000008) //Interrupt mask control
|
|
#define PRIORITY (*(volatile unsigned *)0x4a00000c) //IRQ priority control
|
|
#define INTPND (*(volatile unsigned *)0x4a000010) //Interrupt request status
|
|
#define INTOFFSET (*(volatile unsigned *)0x4a000014) //Interruot request source offset
|
|
#define SUBSRCPND (*(volatile unsigned *)0x4a000018) //Sub source pending
|
|
#define INTSUBMSK (*(volatile unsigned *)0x4a00001c) //Interrupt sub mask
|
|
|
|
|
|
// DMA
|
|
#define DISRC0 (*(volatile unsigned *)0x4b000000) //DMA 0 Initial source
|
|
#define DISRCC0 (*(volatile unsigned *)0x4b000004) //DMA 0 Initial source control
|
|
#define DIDST0 (*(volatile unsigned *)0x4b000008) //DMA 0 Initial Destination
|
|
#define DIDSTC0 (*(volatile unsigned *)0x4b00000c) //DMA 0 Initial Destination control
|
|
#define DCON0 (*(volatile unsigned *)0x4b000010) //DMA 0 Control
|
|
#define DSTAT0 (*(volatile unsigned *)0x4b000014) //DMA 0 Status
|
|
#define DCSRC0 (*(volatile unsigned *)0x4b000018) //DMA 0 Current source
|
|
#define DCDST0 (*(volatile unsigned *)0x4b00001c) //DMA 0 Current destination
|
|
#define DMASKTRIG0 (*(volatile unsigned *)0x4b000020) //DMA 0 Mask trigger
|
|
|
|
#define DISRC1 (*(volatile unsigned *)0x4b000040) //DMA 1 Initial source
|
|
#define DISRCC1 (*(volatile unsigned *)0x4b000044) //DMA 1 Initial source control
|
|
#define DIDST1 (*(volatile unsigned *)0x4b000048) //DMA 1 Initial Destination
|
|
#define DIDSTC1 (*(volatile unsigned *)0x4b00004c) //DMA 1 Initial Destination control
|
|
#define DCON1 (*(volatile unsigned *)0x4b000050) //DMA 1 Control
|
|
#define DSTAT1 (*(volatile unsigned *)0x4b000054) //DMA 1 Status
|
|
#define DCSRC1 (*(volatile unsigned *)0x4b000058) //DMA 1 Current source
|
|
#define DCDST1 (*(volatile unsigned *)0x4b00005c) //DMA 1 Current destination
|
|
#define DMASKTRIG1 (*(volatile unsigned *)0x4b000060) //DMA 1 Mask trigger
|
|
|
|
#define DISRC2 (*(volatile unsigned *)0x4b000080) //DMA 2 Initial source
|
|
#define DISRCC2 (*(volatile unsigned *)0x4b000084) //DMA 2 Initial source control
|
|
#define DIDST2 (*(volatile unsigned *)0x4b000088) //DMA 2 Initial Destination
|
|
#define DIDSTC2 (*(volatile unsigned *)0x4b00008c) //DMA 2 Initial Destination control
|
|
#define DCON2 (*(volatile unsigned *)0x4b000090) //DMA 2 Control
|
|
#define DSTAT2 (*(volatile unsigned *)0x4b000094) //DMA 2 Status
|
|
#define DCSRC2 (*(volatile unsigned *)0x4b000098) //DMA 2 Current source
|
|
#define DCDST2 (*(volatile unsigned *)0x4b00009c) //DMA 2 Current destination
|
|
#define DMASKTRIG2 (*(volatile unsigned *)0x4b0000a0) //DMA 2 Mask trigger
|
|
|
|
#define DISRC3 (*(volatile unsigned *)0x4b0000c0) //DMA 3 Initial source
|
|
#define DISRCC3 (*(volatile unsigned *)0x4b0000c4) //DMA 3 Initial source control
|
|
#define DIDST3 (*(volatile unsigned *)0x4b0000c8) //DMA 3 Initial Destination
|
|
#define DIDSTC3 (*(volatile unsigned *)0x4b0000cc) //DMA 3 Initial Destination control
|
|
#define DCON3 (*(volatile unsigned *)0x4b0000d0) //DMA 3 Control
|
|
#define DSTAT3 (*(volatile unsigned *)0x4b0000d4) //DMA 3 Status
|
|
#define DCSRC3 (*(volatile unsigned *)0x4b0000d8) //DMA 3 Current source
|
|
#define DCDST3 (*(volatile unsigned *)0x4b0000dc) //DMA 3 Current destination
|
|
#define DMASKTRIG3 (*(volatile unsigned *)0x4b0000e0) //DMA 3 Mask trigger
|
|
|
|
|
|
// CLOCK & POWER MANAGEMENT
|
|
#define LOCKTIME (*(volatile unsigned *)0x4c000000) //PLL lock time counter
|
|
#define MPLLCON (*(volatile unsigned *)0x4c000004) //MPLL Control
|
|
#define UPLLCON (*(volatile unsigned *)0x4c000008) //UPLL Control
|
|
#define CLKCON (*(volatile unsigned *)0x4c00000c) //Clock generator control
|
|
#define CLKSLOW (*(volatile unsigned *)0x4c000010) //Slow clock control
|
|
#define CLKDIVN (*(volatile unsigned *)0x4c000014) //Clock divider control
|
|
#define CAMDIVN (*(volatile unsigned *)0x4c000018) //USB, CAM Clock divider control
|
|
|
|
|
|
// LCD CONTROLLER
|
|
#define LCDCON1 (*(volatile unsigned *)0x4d000000) //LCD control 1
|
|
#define LCDCON2 (*(volatile unsigned *)0x4d000004) //LCD control 2
|
|
#define LCDCON3 (*(volatile unsigned *)0x4d000008) //LCD control 3
|
|
#define LCDCON4 (*(volatile unsigned *)0x4d00000c) //LCD control 4
|
|
#define LCDCON5 (*(volatile unsigned *)0x4d000010) //LCD control 5
|
|
#define LCDSADDR1 (*(volatile unsigned *)0x4d000014) //STN/TFT Frame buffer start address 1
|
|
#define LCDSADDR2 (*(volatile unsigned *)0x4d000018) //STN/TFT Frame buffer start address 2
|
|
#define LCDSADDR3 (*(volatile unsigned *)0x4d00001c) //STN/TFT Virtual screen address set
|
|
#define REDLUT (*(volatile unsigned *)0x4d000020) //STN Red lookup table
|
|
#define GREENLUT (*(volatile unsigned *)0x4d000024) //STN Green lookup table
|
|
#define BLUELUT (*(volatile unsigned *)0x4d000028) //STN Blue lookup table
|
|
#define DITHMODE (*(volatile unsigned *)0x4d00004c) //STN Dithering mode
|
|
#define TPAL (*(volatile unsigned *)0x4d000050) //TFT Temporary palette
|
|
#define LCDINTPND (*(volatile unsigned *)0x4d000054) //LCD Interrupt pending
|
|
#define LCDSRCPND (*(volatile unsigned *)0x4d000058) //LCD Interrupt source
|
|
#define LCDINTMSK (*(volatile unsigned *)0x4d00005c) //LCD Interrupt mask
|
|
#define LPCSEL (*(volatile unsigned *)0x4d000060) //LPC3600 Control
|
|
#define PALETTE 0x4d000400 //Palette start address
|
|
|
|
|
|
// NAND flash
|
|
#define NFCONF (*(volatile unsigned *)0x4e000000) //NAND Flash configuration
|
|
#define NFCMD (*(volatile unsigned *)0x4e000004) //NADD Flash command
|
|
#define NFADDR (*(volatile unsigned *)0x4e000008) //NAND Flash address
|
|
#define NFDATA (*(volatile unsigned *)0x4e00000c) //NAND Flash data
|
|
#define NFSTAT (*(volatile unsigned *)0x4e000010) //NAND Flash operation status
|
|
#define NFECC (*(volatile unsigned *)0x4e000014) //NAND Flash ECC
|
|
#define NFECC0 (*(volatile unsigned *)0x4e000014)
|
|
#define NFECC1 (*(volatile unsigned *)0x4e000015)
|
|
#define NFECC2 (*(volatile unsigned *)0x4e000016)
|
|
|
|
// UART
|
|
#define U0BASE (*(volatile unsigned *)0x50000000) //UART 0 Line control
|
|
#define ULCON0 (*(volatile unsigned *)0x50000000) //UART 0 Line control
|
|
#define UCON0 (*(volatile unsigned *)0x50000004) //UART 0 Control
|
|
#define UFCON0 (*(volatile unsigned *)0x50000008) //UART 0 FIFO control
|
|
#define UMCON0 (*(volatile unsigned *)0x5000000c) //UART 0 Modem control
|
|
#define USTAT0 (*(volatile unsigned *)0x50000010) //UART 0 Tx/Rx status
|
|
#define URXB0 (*(volatile unsigned *)0x50000014) //UART 0 Rx error status
|
|
#define UFSTAT0 (*(volatile unsigned *)0x50000018) //UART 0 FIFO status
|
|
#define UMSTAT0 (*(volatile unsigned *)0x5000001c) //UART 0 Modem status
|
|
#define UBRD0 (*(volatile unsigned *)0x50000028) //UART 0 Baud ate divisor
|
|
|
|
#define U1BASE (*(volatile unsigned *)0x50004000) //UART 1 Line control
|
|
#define ULCON1 (*(volatile unsigned *)0x50004000) //UART 1 Line control
|
|
#define UCON1 (*(volatile unsigned *)0x50004004) //UART 1 Control
|
|
#define UFCON1 (*(volatile unsigned *)0x50004008) //UART 1 FIFO control
|
|
#define UMCON1 (*(volatile unsigned *)0x5000400c) //UART 1 Modem control
|
|
#define USTAT1 (*(volatile unsigned *)0x50004010) //UART 1 Tx/Rx status
|
|
#define URXB1 (*(volatile unsigned *)0x50004014) //UART 1 Rx error status
|
|
#define UFSTAT1 (*(volatile unsigned *)0x50004018) //UART 1 FIFO status
|
|
#define UMSTAT1 (*(volatile unsigned *)0x5000401c) //UART 1 Modem status
|
|
#define UBRD1 (*(volatile unsigned *)0x50004028) //UART 1 Baud ate divisor
|
|
|
|
#define U2BASE *(volatile unsigned *)0x50008000 //UART 2 Line control
|
|
#define ULCON2 (*(volatile unsigned *)0x50008000) //UART 2 Line control
|
|
#define UCON2 (*(volatile unsigned *)0x50008004) //UART 2 Control
|
|
#define UFCON2 (*(volatile unsigned *)0x50008008) //UART 2 FIFO control
|
|
#define UMCON2 (*(volatile unsigned *)0x5000800c) //UART 2 Modem control
|
|
#define USTAT2 (*(volatile unsigned *)0x50008010) //UART 2 Tx/Rx status
|
|
#define URXB2 (*(volatile unsigned *)0x50008014) //UART 2 Rx error status
|
|
#define UFSTAT2 (*(volatile unsigned *)0x50008018) //UART 2 FIFO status
|
|
#define UMSTAT2 (*(volatile unsigned *)0x5000801c) //UART 2 Modem status
|
|
#define UBRD2 (*(volatile unsigned *)0x50008028) //UART 2 Baud ate divisor
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
#define UTXH0 (*(volatile unsigned char *)0x50000023) //UART 0 Transmission Hold
|
|
#define URXH0 (*(volatile unsigned char *)0x50000027) //UART 0 Receive buffer
|
|
#define UTXH1 (*(volatile unsigned char *)0x50004023) //UART 1 Transmission Hold
|
|
#define URXH1 (*(volatile unsigned char *)0x50004027) //UART 1 Receive buffer
|
|
#define UTXH2 (*(volatile unsigned char *)0x50008023) //UART 2 Transmission Hold
|
|
#define URXH2 (*(volatile unsigned char *)0x50008027) //UART 2 Receive buffer
|
|
|
|
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch)
|
|
#define RdURXH0() (*(volatile unsigned char *)0x50000027)
|
|
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch)
|
|
#define RdURXH1() (*(volatile unsigned char *)0x50004027)
|
|
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch)
|
|
#define RdURXH2() (*(volatile unsigned char *)0x50008027)
|
|
|
|
#else //Little Endian
|
|
#define UTXH0 (*(volatile unsigned char *)0x50000020) //UART 0 Transmission Hold
|
|
#define URXH0 (*(volatile unsigned char *)0x50000024) //UART 0 Receive buffer
|
|
#define UTXH1 (*(volatile unsigned char *)0x50004020) //UART 1 Transmission Hold
|
|
#define URXH1 (*(volatile unsigned char *)0x50004024) //UART 1 Receive buffer
|
|
#define UTXH2 (*(volatile unsigned char *)0x50008020) //UART 2 Transmission Hold
|
|
#define URXH2 (*(volatile unsigned char *)0x50008024) //UART 2 Receive buffer
|
|
|
|
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
|
|
#define RdURXH0() (*(volatile unsigned char *)0x50000024)
|
|
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
|
|
#define RdURXH1() (*(volatile unsigned char *)0x50004024)
|
|
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
|
|
#define RdURXH2() (*(volatile unsigned char *)0x50008024)
|
|
|
|
#endif
|
|
|
|
|
|
// PWM TIMER
|
|
#define TCFG0 (*(volatile unsigned *)0x51000000) //Timer 0 configuration
|
|
#define TCFG1 (*(volatile unsigned *)0x51000004) //Timer 1 configuration
|
|
#define TCON (*(volatile unsigned *)0x51000008) //Timer control
|
|
#define TCNTB0 (*(volatile unsigned *)0x5100000c) //Timer count buffer 0
|
|
#define TCMPB0 (*(volatile unsigned *)0x51000010) //Timer compare buffer 0
|
|
#define TCNTO0 (*(volatile unsigned *)0x51000014) //Timer count observation 0
|
|
#define TCNTB1 (*(volatile unsigned *)0x51000018) //Timer count buffer 1
|
|
#define TCMPB1 (*(volatile unsigned *)0x5100001c) //Timer compare buffer 1
|
|
#define TCNTO1 (*(volatile unsigned *)0x51000020) //Timer count observation 1
|
|
#define TCNTB2 (*(volatile unsigned *)0x51000024) //Timer count buffer 2
|
|
#define TCMPB2 (*(volatile unsigned *)0x51000028) //Timer compare buffer 2
|
|
#define TCNTO2 (*(volatile unsigned *)0x5100002c) //Timer count observation 2
|
|
#define TCNTB3 (*(volatile unsigned *)0x51000030) //Timer count buffer 3
|
|
#define TCMPB3 (*(volatile unsigned *)0x51000034) //Timer compare buffer 3
|
|
#define TCNTO3 (*(volatile unsigned *)0x51000038) //Timer count observation 3
|
|
#define TCNTB4 (*(volatile unsigned *)0x5100003c) //Timer count buffer 4
|
|
#define TCNTO4 (*(volatile unsigned *)0x51000040) //Timer count observation 4
|
|
|
|
// Added for 2440
|
|
#define FLTOUT (*(volatile unsigned *)0x560000c0) // Filter output(Read only)
|
|
#define DSC0 (*(volatile unsigned *)0x560000c4) // Strength control register 0
|
|
#define DSC1 (*(volatile unsigned *)0x560000c8) // Strength control register 1
|
|
#define MSLCON (*(volatile unsigned *)0x560000cc) // Memory sleep control register
|
|
|
|
|
|
// USB DEVICE
|
|
#ifdef __BIG_ENDIAN
|
|
#define FUNC_ADDR_REG (*(volatile unsigned char *)0x52000143) //Function address
|
|
#define PWR_REG (*(volatile unsigned char *)0x52000147) //Power management
|
|
#define EP_INT_REG (*(volatile unsigned char *)0x5200014b) //EP Interrupt pending and clear
|
|
#define USB_INT_REG (*(volatile unsigned char *)0x5200015b) //USB Interrupt pending and clear
|
|
#define EP_INT_EN_REG (*(volatile unsigned char *)0x5200015f) //Interrupt enable
|
|
#define USB_INT_EN_REG (*(volatile unsigned char *)0x5200016f)
|
|
#define FRAME_NUM1_REG (*(volatile unsigned char *)0x52000173) //Frame number lower byte
|
|
#define FRAME_NUM2_REG (*(volatile unsigned char *)0x52000177) //Frame number higher byte
|
|
#define INDEX_REG (*(volatile unsigned char *)0x5200017b) //Register index
|
|
#define MAXP_REG (*(volatile unsigned char *)0x52000183) //Endpoint max packet
|
|
#define EP0_CSR (*(volatile unsigned char *)0x52000187) //Endpoint 0 status
|
|
#define IN_CSR1_REG (*(volatile unsigned char *)0x52000187) //In endpoint control status
|
|
#define IN_CSR2_REG (*(volatile unsigned char *)0x5200018b)
|
|
#define OUT_CSR1_REG (*(volatile unsigned char *)0x52000193) //Out endpoint control status
|
|
#define OUT_CSR2_REG (*(volatile unsigned char *)0x52000197)
|
|
#define OUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x5200019b) //Endpoint out write count
|
|
#define OUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019f)
|
|
#define EP0_FIFO (*(volatile unsigned char *)0x520001c3) //Endpoint 0 FIFO
|
|
#define EP1_FIFO (*(volatile unsigned char *)0x520001c7) //Endpoint 1 FIFO
|
|
#define EP2_FIFO (*(volatile unsigned char *)0x520001cb) //Endpoint 2 FIFO
|
|
#define EP3_FIFO (*(volatile unsigned char *)0x520001cf) //Endpoint 3 FIFO
|
|
#define EP4_FIFO (*(volatile unsigned char *)0x520001d3) //Endpoint 4 FIFO
|
|
#define EP1_DMA_CON (*(volatile unsigned char *)0x52000203) //EP1 DMA interface control
|
|
#define EP1_DMA_UNIT (*(volatile unsigned char *)0x52000207) //EP1 DMA Tx unit counter
|
|
#define EP1_DMA_FIFO (*(volatile unsigned char *)0x5200020b) //EP1 DMA Tx FIFO counter
|
|
#define EP1_DMA_TTC_L (*(volatile unsigned char *)0x5200020f) //EP1 DMA total Tx counter
|
|
#define EP1_DMA_TTC_M (*(volatile unsigned char *)0x52000213)
|
|
#define EP1_DMA_TTC_H (*(volatile unsigned char *)0x52000217)
|
|
#define EP2_DMA_CON (*(volatile unsigned char *)0x5200021b) //EP2 DMA interface control
|
|
#define EP2_DMA_UNIT (*(volatile unsigned char *)0x5200021f) //EP2 DMA Tx unit counter
|
|
#define EP2_DMA_FIFO (*(volatile unsigned char *)0x52000223) //EP2 DMA Tx FIFO counter
|
|
#define EP2_DMA_TTC_L (*(volatile unsigned char *)0x52000227) //EP2 DMA total Tx counter
|
|
#define EP2_DMA_TTC_M (*(volatile unsigned char *)0x5200022b)
|
|
#define EP2_DMA_TTC_H (*(volatile unsigned char *)0x5200022f)
|
|
#define EP3_DMA_CON (*(volatile unsigned char *)0x52000243) //EP3 DMA interface control
|
|
#define EP3_DMA_UNIT (*(volatile unsigned char *)0x52000247) //EP3 DMA Tx unit counter
|
|
#define EP3_DMA_FIFO (*(volatile unsigned char *)0x5200024b) //EP3 DMA Tx FIFO counter
|
|
#define EP3_DMA_TTC_L (*(volatile unsigned char *)0x5200024f) //EP3 DMA total Tx counter
|
|
#define EP3_DMA_TTC_M (*(volatile unsigned char *)0x52000253)
|
|
#define EP3_DMA_TTC_H (*(volatile unsigned char *)0x52000257)
|
|
#define EP4_DMA_CON (*(volatile unsigned char *)0x5200025b) //EP4 DMA interface control
|
|
#define EP4_DMA_UNIT (*(volatile unsigned char *)0x5200025f) //EP4 DMA Tx unit counter
|
|
#define EP4_DMA_FIFO (*(volatile unsigned char *)0x52000263) //EP4 DMA Tx FIFO counter
|
|
#define EP4_DMA_TTC_L (*(volatile unsigned char *)0x52000267) //EP4 DMA total Tx counter
|
|
#define EP4_DMA_TTC_M (*(volatile unsigned char *)0x5200026b)
|
|
#define EP4_DMA_TTC_H (*(volatile unsigned char *)0x5200026f)
|
|
|
|
#else // Little Endian
|
|
#define FUNC_ADDR_REG (*(volatile unsigned char *)0x52000140) //Function address
|
|
#define PWR_REG (*(volatile unsigned char *)0x52000144) //Power management
|
|
#define EP_INT_REG (*(volatile unsigned char *)0x52000148) //EP Interrupt pending and clear
|
|
#define USB_INT_REG (*(volatile unsigned char *)0x52000158) //USB Interrupt pending and clear
|
|
#define EP_INT_EN_REG (*(volatile unsigned char *)0x5200015c) //Interrupt enable
|
|
#define USB_INT_EN_REG (*(volatile unsigned char *)0x5200016c)
|
|
#define FRAME_NUM1_REG (*(volatile unsigned char *)0x52000170) //Frame number lower byte
|
|
#define FRAME_NUM2_REG (*(volatile unsigned char *)0x52000174) //Frame number higher byte
|
|
#define INDEX_REG (*(volatile unsigned char *)0x52000178) //Register index
|
|
#define MAXP_REG (*(volatile unsigned char *)0x52000180) //Endpoint max packet
|
|
#define EP0_CSR (*(volatile unsigned char *)0x52000184) //Endpoint 0 status
|
|
#define IN_CSR1_REG (*(volatile unsigned char *)0x52000184) //In endpoint control status
|
|
#define IN_CSR2_REG (*(volatile unsigned char *)0x52000188)
|
|
#define OUT_CSR1_REG (*(volatile unsigned char *)0x52000190) //Out endpoint control status
|
|
#define OUT_CSR2_REG (*(volatile unsigned char *)0x52000194)
|
|
#define OUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) //Endpoint out write count
|
|
#define OUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019c)
|
|
#define EP0_FIFO (*(volatile unsigned char *)0x520001c0) //Endpoint 0 FIFO
|
|
#define EP1_FIFO (*(volatile unsigned char *)0x520001c4) //Endpoint 1 FIFO
|
|
#define EP2_FIFO (*(volatile unsigned char *)0x520001c8) //Endpoint 2 FIFO
|
|
#define EP3_FIFO (*(volatile unsigned char *)0x520001cc) //Endpoint 3 FIFO
|
|
#define EP4_FIFO (*(volatile unsigned char *)0x520001d0) //Endpoint 4 FIFO
|
|
#define EP1_DMA_CON (*(volatile unsigned char *)0x52000200) //EP1 DMA interface control
|
|
#define EP1_DMA_UNIT (*(volatile unsigned char *)0x52000204) //EP1 DMA Tx unit counter
|
|
#define EP1_DMA_FIFO (*(volatile unsigned char *)0x52000208) //EP1 DMA Tx FIFO counter
|
|
#define EP1_DMA_TTC_L (*(volatile unsigned char *)0x5200020c) //EP1 DMA total Tx counter
|
|
#define EP1_DMA_TTC_M (*(volatile unsigned char *)0x52000210)
|
|
#define EP1_DMA_TTC_H (*(volatile unsigned char *)0x52000214)
|
|
#define EP2_DMA_CON (*(volatile unsigned char *)0x52000218) //EP2 DMA interface control
|
|
#define EP2_DMA_UNIT (*(volatile unsigned char *)0x5200021c) //EP2 DMA Tx unit counter
|
|
#define EP2_DMA_FIFO (*(volatile unsigned char *)0x52000220) //EP2 DMA Tx FIFO counter
|
|
#define EP2_DMA_TTC_L (*(volatile unsigned char *)0x52000224) //EP2 DMA total Tx counter
|
|
#define EP2_DMA_TTC_M (*(volatile unsigned char *)0x52000228)
|
|
#define EP2_DMA_TTC_H (*(volatile unsigned char *)0x5200022c)
|
|
#define EP3_DMA_CON (*(volatile unsigned char *)0x52000240) //EP3 DMA interface control
|
|
#define EP3_DMA_UNIT (*(volatile unsigned char *)0x52000244) //EP3 DMA Tx unit counter
|
|
#define EP3_DMA_FIFO (*(volatile unsigned char *)0x52000248) //EP3 DMA Tx FIFO counter
|
|
#define EP3_DMA_TTC_L (*(volatile unsigned char *)0x5200024c) //EP3 DMA total Tx counter
|
|
#define EP3_DMA_TTC_M (*(volatile unsigned char *)0x52000250)
|
|
#define EP3_DMA_TTC_H (*(volatile unsigned char *)0x52000254)
|
|
#define EP4_DMA_CON (*(volatile unsigned char *)0x52000258) //EP4 DMA interface control
|
|
#define EP4_DMA_UNIT (*(volatile unsigned char *)0x5200025c) //EP4 DMA Tx unit counter
|
|
#define EP4_DMA_FIFO (*(volatile unsigned char *)0x52000260) //EP4 DMA Tx FIFO counter
|
|
#define EP4_DMA_TTC_L (*(volatile unsigned char *)0x52000264) //EP4 DMA total Tx counter
|
|
#define EP4_DMA_TTC_M (*(volatile unsigned char *)0x52000268)
|
|
#define EP4_DMA_TTC_H (*(volatile unsigned char *)0x5200026c)
|
|
#endif // __BIG_ENDIAN
|
|
|
|
|
|
// WATCH DOG TIMER
|
|
#define WTCON (*(volatile unsigned *)0x53000000) //Watch-dog timer mode
|
|
#define WTDAT (*(volatile unsigned *)0x53000004) //Watch-dog timer data
|
|
#define WTCNT (*(volatile unsigned *)0x53000008) //Eatch-dog timer count
|
|
|
|
|
|
// IIC
|
|
#define IICCON (*(volatile unsigned *)0x54000000) //IIC control
|
|
#define IICSTAT (*(volatile unsigned *)0x54000004) //IIC status
|
|
#define IICADD (*(volatile unsigned *)0x54000008) //IIC address
|
|
#define IICDS (*(volatile unsigned *)0x5400000c) //IIC data shift
|
|
|
|
|
|
// IIS
|
|
#define IISCON (*(volatile unsigned *)0x55000000) //IIS Control
|
|
#define IISMOD (*(volatile unsigned *)0x55000004) //IIS Mode
|
|
#define IISPSR (*(volatile unsigned *)0x55000008) //IIS Prescaler
|
|
#define IISFCON (*(volatile unsigned *)0x5500000c) //IIS FIFO control
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
#define IISFIFO ((volatile unsigned short *)0x55000012) //IIS FIFO entry
|
|
|
|
#else //Little Endian
|
|
#define IISFIFO ((volatile unsigned short *)0x55000010) //IIS FIFO entry
|
|
|
|
#endif
|
|
|
|
|
|
// I/O PORT
|
|
#define GPACON (*(volatile unsigned *)0x56000000) //Port A control
|
|
#define GPADAT (*(volatile unsigned *)0x56000004) //Port A data
|
|
|
|
#define GPBCON (*(volatile unsigned *)0x56000010) //Port B control
|
|
#define GPBDAT (*(volatile unsigned *)0x56000014) //Port B data
|
|
#define GPBUP (*(volatile unsigned *)0x56000018) //Pull-up control B
|
|
|
|
#define GPCCON (*(volatile unsigned *)0x56000020) //Port C control
|
|
#define GPCDAT (*(volatile unsigned *)0x56000024) //Port C data
|
|
#define GPCUP (*(volatile unsigned *)0x56000028) //Pull-up control C
|
|
|
|
#define GPDCON (*(volatile unsigned *)0x56000030) //Port D control
|
|
#define GPDDAT (*(volatile unsigned *)0x56000034) //Port D data
|
|
#define GPDUP (*(volatile unsigned *)0x56000038) //Pull-up control D
|
|
|
|
#define GPECON (*(volatile unsigned *)0x56000040) //Port E control
|
|
#define GPEDAT (*(volatile unsigned *)0x56000044) //Port E data
|
|
#define GPEUP (*(volatile unsigned *)0x56000048) //Pull-up control E
|
|
|
|
#define GPFCON (*(volatile unsigned *)0x56000050) //Port F control
|
|
#define GPFDAT (*(volatile unsigned *)0x56000054) //Port F data
|
|
#define GPFUP (*(volatile unsigned *)0x56000058) //Pull-up control F
|
|
|
|
#define GPGCON (*(volatile unsigned *)0x56000060) //Port G control
|
|
#define GPGDAT (*(volatile unsigned *)0x56000064) //Port G data
|
|
#define GPGUP (*(volatile unsigned *)0x56000068) //Pull-up control G
|
|
|
|
#define GPHCON (*(volatile unsigned *)0x56000070) //Port H control
|
|
#define GPHDAT (*(volatile unsigned *)0x56000074) //Port H data
|
|
#define GPHUP (*(volatile unsigned *)0x56000078) //Pull-up control H
|
|
|
|
#define GPJCON (*(volatile unsigned *)0x560000d0) //Port J control
|
|
#define GPJDAT (*(volatile unsigned *)0x560000d4) //Port J data
|
|
#define GPJUP (*(volatile unsigned *)0x560000d8) //Pull-up control J
|
|
|
|
#define MISCCR (*(volatile unsigned *)0x56000080) //Miscellaneous control
|
|
#define DCLKCON (*(volatile unsigned *)0x56000084) //DCLK0/1 control
|
|
#define EXTINT0 (*(volatile unsigned *)0x56000088) //External interrupt control egister 0
|
|
#define EXTINT1 (*(volatile unsigned *)0x5600008c) //External interrupt control egister 1
|
|
#define EXTINT2 (*(volatile unsigned *)0x56000090) //External interrupt control egister 2
|
|
#define EINTFLT0 (*(volatile unsigned *)0x56000094) //Reserved
|
|
#define EINTFLT1 (*(volatile unsigned *)0x56000098) //Reserved
|
|
#define EINTFLT2 (*(volatile unsigned *)0x5600009c) //External interrupt filter control egister 2
|
|
#define EINTFLT3 (*(volatile unsigned *)0x560000a0) //External interrupt filter control egister 3
|
|
#define EINTMASK (*(volatile unsigned *)0x560000a4) //External interrupt mask
|
|
#define EINTPEND (*(volatile unsigned *)0x560000a8) //External interrupt pending
|
|
#define GSTATUS0 (*(volatile unsigned *)0x560000ac) //External pin status
|
|
#define GSTATUS1 (*(volatile unsigned *)0x560000b0) //Chip ID(0x32410000)
|
|
#define GSTATUS2 (*(volatile unsigned *)0x560000b4) //Reset type
|
|
#define GSTATUS3 (*(volatile unsigned *)0x560000b8) //Saved data0(32-bit) before entering POWER_OFF mode
|
|
#define GSTATUS4 (*(volatile unsigned *)0x560000bc) //Saved data0(32-bit) before entering POWER_OFF mode
|
|
|
|
|
|
// RTC
|
|
#ifdef __BIG_ENDIAN
|
|
#define RTCCON (*(volatile unsigned char *)0x57000043) //RTC control
|
|
#define TICNT (*(volatile unsigned char *)0x57000047) //Tick time count
|
|
#define RTCALM (*(volatile unsigned char *)0x57000053) //RTC alarm control
|
|
#define ALMSEC (*(volatile unsigned char *)0x57000057) //Alarm second
|
|
#define ALMMIN (*(volatile unsigned char *)0x5700005b) //Alarm minute
|
|
#define ALMHOUR (*(volatile unsigned char *)0x5700005f) //Alarm Hour
|
|
#define ALMDATE (*(volatile unsigned char *)0x57000063) //Alarm day <-- May 06, 2002 SOP
|
|
#define ALMMON (*(volatile unsigned char *)0x57000067) //Alarm month
|
|
#define ALMYEAR (*(volatile unsigned char *)0x5700006b) //Alarm year
|
|
#define RTCRST (*(volatile unsigned char *)0x5700006f) //RTC ound eset
|
|
#define BCDSEC (*(volatile unsigned char *)0x57000073) //BCD second
|
|
#define BCDMIN (*(volatile unsigned char *)0x57000077) //BCD minute
|
|
#define BCDHOUR (*(volatile unsigned char *)0x5700007b) //BCD hour
|
|
#define BCDDATE (*(volatile unsigned char *)0x5700007f) //BCD day <-- May 06, 2002 SOP
|
|
#define BCDDAY (*(volatile unsigned char *)0x57000083) //BCD date <-- May 06, 2002 SOP
|
|
#define BCDMON (*(volatile unsigned char *)0x57000087) //BCD month
|
|
#define BCDYEAR (*(volatile unsigned char *)0x5700008b) //BCD year
|
|
|
|
#else //Little Endian
|
|
#define RTCCON (*(volatile unsigned char *)0x57000040) //RTC control
|
|
#define TICNT (*(volatile unsigned char *)0x57000044) //Tick time count
|
|
#define RTCALM (*(volatile unsigned char *)0x57000050) //RTC alarm control
|
|
#define ALMSEC (*(volatile unsigned char *)0x57000054) //Alarm second
|
|
#define ALMMIN (*(volatile unsigned char *)0x57000058) //Alarm minute
|
|
#define ALMHOUR (*(volatile unsigned char *)0x5700005c) //Alarm Hour
|
|
#define ALMDATE (*(volatile unsigned char *)0x57000060) //Alarm day <-- May 06, 2002 SOP
|
|
#define ALMMON (*(volatile unsigned char *)0x57000064) //Alarm month
|
|
#define ALMYEAR (*(volatile unsigned char *)0x57000068) //Alarm year
|
|
#define RTCRST (*(volatile unsigned char *)0x5700006c) //RTC ound eset
|
|
#define BCDSEC (*(volatile unsigned char *)0x57000070) //BCD second
|
|
#define BCDMIN (*(volatile unsigned char *)0x57000074) //BCD minute
|
|
#define BCDHOUR (*(volatile unsigned char *)0x57000078) //BCD hour
|
|
#define BCDDATE (*(volatile unsigned char *)0x5700007c) //BCD day <-- May 06, 2002 SOP
|
|
#define BCDDAY (*(volatile unsigned char *)0x57000080) //BCD date <-- May 06, 2002 SOP
|
|
#define BCDMON (*(volatile unsigned char *)0x57000084) //BCD month
|
|
#define BCDYEAR (*(volatile unsigned char *)0x57000088) //BCD year
|
|
#endif //RTC
|
|
|
|
|
|
// ADC
|
|
#define ADCCON (*(volatile unsigned *)0x58000000) //ADC control
|
|
#define ADCTSC (*(volatile unsigned *)0x58000004) //ADC touch screen control
|
|
#define ADCDLY (*(volatile unsigned *)0x58000008) //ADC start or Interval Delay
|
|
#define ADCDAT0 (*(volatile unsigned *)0x5800000c) //ADC conversion data 0
|
|
#define ADCDAT1 (*(volatile unsigned *)0x58000010) //ADC conversion data 1
|
|
|
|
// SPI
|
|
#define SPCON0 (*(volatile unsigned *)0x59000000) //SPI0 control
|
|
#define SPSTA0 (*(volatile unsigned *)0x59000004) //SPI0 status
|
|
#define SPPIN0 (*(volatile unsigned *)0x59000008) //SPI0 pin control
|
|
#define SPPRE0 (*(volatile unsigned *)0x5900000c) //SPI0 baud ate prescaler
|
|
#define SPTDAT0 (*(volatile unsigned *)0x59000010) //SPI0 Tx data
|
|
#define SPRDAT0 (*(volatile unsigned *)0x59000014) //SPI0 Rx data
|
|
|
|
#define SPCON1 (*(volatile unsigned *)0x59000020) //SPI1 control
|
|
#define SPSTA1 (*(volatile unsigned *)0x59000024) //SPI1 status
|
|
#define SPPIN1 (*(volatile unsigned *)0x59000028) //SPI1 pin control
|
|
#define SPPRE1 (*(volatile unsigned *)0x5900002c) //SPI1 baud ate prescaler
|
|
#define SPTDAT1 (*(volatile unsigned *)0x59000030) //SPI1 Tx data
|
|
#define SPRDAT1 (*(volatile unsigned *)0x59000034) //SPI1 Rx data
|
|
|
|
|
|
// SD Interface
|
|
#define SDICON (*(volatile unsigned *)0x5a000000) //SDI control
|
|
#define SDIPRE (*(volatile unsigned *)0x5a000004) //SDI baud ate prescaler
|
|
#define SDICARG (*(volatile unsigned *)0x5a000008) //SDI command argument
|
|
#define SDICCON (*(volatile unsigned *)0x5a00000c) //SDI command control
|
|
#define SDICSTA (*(volatile unsigned *)0x5a000010) //SDI command status
|
|
#define SDIRSP0 (*(volatile unsigned *)0x5a000014) //SDI esponse 0
|
|
#define SDIRSP1 (*(volatile unsigned *)0x5a000018) //SDI esponse 1
|
|
#define SDIRSP2 (*(volatile unsigned *)0x5a00001c) //SDI esponse 2
|
|
#define SDIRSP3 (*(volatile unsigned *)0x5a000020) //SDI esponse 3
|
|
#define SDIDTIMER (*(volatile unsigned *)0x5a000024) //SDI data/busy timer
|
|
#define SDIBSIZE (*(volatile unsigned *)0x5a000028) //SDI block size
|
|
#define SDIDCON (*(volatile unsigned *)0x5a00002c) //SDI data control
|
|
#define SDIDCNT (*(volatile unsigned *)0x5a000030) //SDI data emain counter
|
|
#define SDIDSTA (*(volatile unsigned *)0x5a000034) //SDI data status
|
|
#define SDIFSTA (*(volatile unsigned *)0x5a000038) //SDI FIFO status
|
|
#define SDIIMSK (*(volatile unsigned *)0x5a000040) //SDI interrupt mask
|
|
|
|
#ifdef __BIG_ENDIAN /* edited for 2440A */
|
|
#define SDIDAT (*(volatile unsigned *)0x5a00004c)
|
|
#else // Little Endian
|
|
#define SDIDAT (*(volatile unsigned *)0x5a000040)
|
|
#endif //SD Interface
|
|
|
|
// PENDING BIT
|
|
#define INTEINT0 (0)
|
|
#define INTEINT1 (1)
|
|
#define INTEINT2 (2)
|
|
#define INTEINT3 (3)
|
|
#define INTEINT4_7 (4)
|
|
#define INTEINT8_23 (5)
|
|
#define INTNOTUSED6 (6)
|
|
#define INTBAT_FLT (7)
|
|
#define INTTICK (8)
|
|
#define INTWDT (9)
|
|
#define INTTIMER0 (10)
|
|
#define INTTIMER1 (11)
|
|
#define INTTIMER2 (12)
|
|
#define INTTIMER3 (13)
|
|
#define INTTIMER4 (14)
|
|
#define INTUART2 (15)
|
|
#define INTLCD (16)
|
|
#define INTDMA0 (17)
|
|
#define INTDMA1 (18)
|
|
#define INTDMA2 (19)
|
|
#define INTDMA3 (20)
|
|
#define INTSDI (21)
|
|
#define INTSPI0 (22)
|
|
#define INTUART1 (23)
|
|
//#define INTNOTUSED24 (24)
|
|
#define INTNIC (24)
|
|
#define INTUSBD (25)
|
|
#define INTUSBH (26)
|
|
#define INTIIC (27)
|
|
#define INTUART0 (28)
|
|
#define INTSPI1 (29)
|
|
#define INTRTC (30)
|
|
#define INTADC (31)
|
|
#define BIT_ALLMSK (0xffffffff)
|
|
|
|
#define BIT_SUB_ALLMSK (0x7ff)
|
|
#define INTSUB_ADC (10)
|
|
#define INTSUB_TC (9)
|
|
#define INTSUB_ERR2 (8)
|
|
#define INTSUB_TXD2 (7)
|
|
#define INTSUB_RXD2 (6)
|
|
#define INTSUB_ERR1 (5)
|
|
#define INTSUB_TXD1 (4)
|
|
#define INTSUB_RXD1 (3)
|
|
#define INTSUB_ERR0 (2)
|
|
#define INTSUB_TXD0 (1)
|
|
#define INTSUB_RXD0 (0)
|
|
|
|
#define BIT_SUB_ADC (0x1<<10)
|
|
#define BIT_SUB_TC (0x1<<9)
|
|
#define BIT_SUB_ERR2 (0x1<<8)
|
|
#define BIT_SUB_TXD2 (0x1<<7)
|
|
#define BIT_SUB_RXD2 (0x1<<6)
|
|
#define BIT_SUB_ERR1 (0x1<<5)
|
|
#define BIT_SUB_TXD1 (0x1<<4)
|
|
#define BIT_SUB_RXD1 (0x1<<3)
|
|
#define BIT_SUB_ERR0 (0x1<<2)
|
|
#define BIT_SUB_TXD0 (0x1<<1)
|
|
#define BIT_SUB_RXD0 (0x1<<0)
|
|
|
|
#define ClearPending(bit) {SRCPND = bit;INTPND = bit;INTPND;}
|
|
//Wait until INTPND is changed for the case that the ISR is very short.
|
|
|
|
#define INTGLOBAL 32
|
|
|
|
/*****************************/
|
|
/* CPU Mode */
|
|
/*****************************/
|
|
#define USERMODE 0x10
|
|
#define FIQMODE 0x11
|
|
#define IRQMODE 0x12
|
|
#define SVCMODE 0x13
|
|
#define ABORTMODE 0x17
|
|
#define UNDEFMODE 0x1b
|
|
#define MODEMASK 0x1f
|
|
#define NOINT 0xc0
|
|
|
|
struct rt_hw_register
|
|
{
|
|
rt_uint32_t r0;
|
|
rt_uint32_t r1;
|
|
rt_uint32_t r2;
|
|
rt_uint32_t r3;
|
|
rt_uint32_t r4;
|
|
rt_uint32_t r5;
|
|
rt_uint32_t r6;
|
|
rt_uint32_t r7;
|
|
rt_uint32_t r8;
|
|
rt_uint32_t r9;
|
|
rt_uint32_t r10;
|
|
rt_uint32_t fp;
|
|
rt_uint32_t ip;
|
|
rt_uint32_t sp;
|
|
rt_uint32_t lr;
|
|
rt_uint32_t pc;
|
|
rt_uint32_t cpsr;
|
|
rt_uint32_t ORIG_r0;
|
|
};
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/*@}*/
|
|
|
|
#endif
|